Low-temperature heat capacities of MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> and spinels of the MgCr<Subscript>2</Subscript>O<Subscript>4</Subscript>–MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> solid solution

We present results from low-temperature heat capacity measurements of spinels along the solid solution between MgAl₂O₄ and MgCr₂O₄. The data also include new low-temperature heat capacity measurements for MgAl₂O₄ spinel. Heat capacities were measured between 1.5 and 300 K, and thermochemical functions were derived from the results. No heat capacity anomaly was observed for MgAl₂O₄ spinel; however, we observe a low-temperature heat capacity anomaly for Cr-bearing spinels at temperatures below 15 K. From our data we calculate standard entropies (298.15 K) for Mg(Cr,Al)₂O₄ spinels. We suggest a standard entropy for MgAl₂O₄ of 80.9 ± 0.6 J mol⁻¹ K⁻¹. For the solid solution between MgAl₂O₄ and MgCr₂O₄, we observe a linear increase of the standard entropies from 80.9 J mol⁻¹ K⁻¹ for MgAl₂O₄ to 118.3 J mol⁻¹ K⁻¹ for MgCr₂O₄.     

First-principles simulation of high-pressure polymorphs in MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript>

We have used density functional theory to investigate the stability of MgAl₂O₄ polymorphs under pressure. Our results can reasonably explain the transition sequence of MgAl₂O₄ polymorphs observed in previous experiments. The spinel phase (stable at ambient conditions) dissociates into periclase and corundum at 14 GPa. With increasing pressure, a phase change from the two oxides to a calcium-ferrite phase occurs, and finally transforms to a calcium-titanate phase at 68 GPa. The calcium-titanate phase is stable up to at least 150 GPa, and we did not observe a stability field for a hexagonal phase or periclase + Rh₂O₃(II)-type Al₂O₃. The bulk moduli of the phases calculated in this study are in good agreement with those measured in high-pressure experiments. Our results differ from those of a previous study using similar methods. We attribute this inconsistency to an incomplete optimization of a cell shape and ionic positions at high pressures in the previous calculations.     

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.     

Low-temperature heat capacities,entropies and enthalpies of Mg<Subscript>2</Subscript>SiO<Subscript>4</Subscript> polymorphs,and α−β−γ and post-spinel phase relations at high pressure

The low-temperature isobaric heat capacities (C _p) of β- and γ-Mg₂SiO₄ were measured at the range of 1.8–304.7 K with a thermal relaxation method using the Physical Property Measurement System. The obtained standard entropies (S°₂₉₈) of β- and γ-Mg₂SiO₄ are 86.4 ± 0.4 and 82.7 ± 0.5 J/mol K, respectively. Enthalpies of transitions among α-, β- and γ-Mg₂SiO₄ were measured by high-temperature drop-solution calorimetry with gas-bubbling technique. The enthalpies of the α−β and β−γ transitions at 298 K (ΔH°₂₉₈) in Mg₂SiO₄ are 27.2 ± 3.6 and 12.9 ± 3.3 kJ/mol, respectively. Calculated α−β and β−γ transition boundaries were generally consistent with those determined by high-pressure experiments within the errors. Combining the measured ΔH°₂₉₈ and ΔS°₂₉₈ with selected data of in situ X-ray diffraction experiments at high pressure, the ΔH°₂₉₈ and ΔS°₂₉₈ of the α−β and β−γ transitions were optimized. Calculation using the optimized data tightly constrained the α−β and β−γ transition boundaries in the P, T space. The slope of α−β transition boundary is 3.1 MPa/K at 13.4 GPa and 1,400 K, and that of β−γ boundary 5.2 MPa/K at 18.7 GPa and 1,600 K. The post-spinel transition boundary of γ-Mg₂SiO₄ to MgSiO₃ perovskite plus MgO was also calculated, using the optimized data on γ-Mg₂SiO₄ and available enthalpy and entropy data on MgSiO₃ perovskite and MgO. The calculated post-spinel boundary with a Clapeyron slope of −2.6 ± 0.2 MPa/K is located at pressure consistent with the 660 km discontinuity, considering the error of the thermodynamic data.     

Elastic behavior of vanadinite,Pb<Subscript>10</Subscript>(VO<Subscript>4</Subscript>)<Subscript>6</Subscript>Cl<Subscript>2</Subscript>, a microporous non-zeolitic mineral

The high-pressure behavior of a vanadinite (Pb₁₀(VO₄)₆Cl₂, a = b = 10.3254(5), c = 7.3450(4) Å, space group P6₃/m), a natural microporous mineral, has been investigated using in-situ HP-synchrotron X-ray powder diffraction up to 7.67 GPa with a diamond anvil cell under hydrostatic conditions. No phase transition has been observed within the pressure range investigated. Axial and volume isothermal Equations of State (EoS) of vanadinite were determined. Fitting the P–V data with a third-order Birch-Murnaghan (BM) EoS, using the data weighted by the uncertainties in P and V, we obtained: V ₀ = 681(1) Å³, K ₀ = 41(5) GPa, and K′ = 12.5(2.5). The evolution of the lattice constants with P shows a strong anisotropic compression pattern. The axial bulk moduli were calculated with a third-order “linearized” BM-EoS. The EoS parameters are: a ₀ = 10.3302(2) Å, K ₀(a) = 35(2) GPa and K′(a) = 10(1) for the a-axis; c ₀ = 7.3520(3) Å, K ₀(c) = 98(4) GPa, and K′(c) = 9(2) for the c-axis (K ₀(a):K ₀(c) = 1:2.80). Axial and volume Eulerian-finite strain (fe) at different normalized stress (Fe) were calculated. The weighted linear regression through the data points yields the following intercept values: Fe _a (0) = 35(2) GPa for the a-axis, Fe _c (0) = 98(4) GPa for the c-axis and Fe _V (0) = 45(2) GPa for the unit-cell volume. The slope of the regression lines gives rise to K′ values of 10(1) for the a-axis, 9(2) for the c-axis and 11(1) for the unit cell-volume. A comparison between the HP-elastic response of vanadinite and the iso-structural apatite is carried out. The possible reasons of the elastic anisotropy are discussed.     

Effects of nitrogen on the ecosystem respiration,CH<Subscript>4</Subscript> and N<Subscript>2</Subscript>O emissions to the atmosphere from the freshwater marshes in northeast China

Freshwater marshes could be a source of greenhouse gases emission because they contain large amounts of soil carbon and nitrogen. These emissions are strongly influenced by exogenous nitrogen. We investigate the effects of exogenous nitrogen on ecosystem respiration (CO₂), CH₄ and N₂O emissions from freshwater marshes in situ in the Sanjiang Plain Northeast of China during the growing seasons of 2004 and 2005, using a field fertilizer experiment and the static opaque chamber/GC techniques. The results show that there were no significant differences in patterns of seasonal variations of CO₂ and CH₄ among the fertilizer and non-fertilizer treatments, but the seasonal patterns of N₂O emission were significantly influenced by the exogenous nitrogen. Seasonal averages of the CO₂ flux from non-fertilizer and fertilizer were 987.74 and 1,344.35 mg m ⁻² h ⁻¹, respectively, in 2004, and 898.59 and 2,154.17 mg m ⁻² h ⁻¹, respectively, in 2005. And the CH₄ from the control and fertilizer treatments were 6.05 and 13.56 mg m ⁻² h ⁻¹ and 0.72 and 1.88 mg m ⁻² h ⁻¹, respectively, in 2004 and 2005. The difference of N₂O flux between the fertilizer and non-fertilizer treatments is also significant either in 2004 and 2005. On the time scale of 20-, 100-, and 500-year periods, the integrated global warming potential (GWP) of CO₂ + CH₄ + N₂O released during the two growing seasons for the treatment of fertilizer was 97, 94 and 89%, respectively, higher than that for the control, which suggested that the nitrogen fertilizer can enhance the GWP of the CH₄ and N₂O either in long time or short time scale.     

Characterisation of the antiferromagnetic transition of Cu<Subscript>2</Subscript>FeSnS<Subscript>4</Subscript>, the synthetic analogue of stannite

Magnetisation measurements were performed on the synthetic analogue of stannite, Cu₂FeSnS₄, in order to characterise the antiferromagnetic transition at low temperature, evidenced by Bernardini et al. (2000). Temperature and field dependence of the material were checked by means of static magnetisation measurements, carried out scanning the magnetic fields up to 12 T and temperatures in the range 1.4–20 K, while ac susceptibility data were collected at different frequencies ranging from 1.8 to 510 Hz. Both static and dynamic magnetisation data, performed above and below the Néel temperature, 6.1(2) K, confirm stannite to order antiferromagnetically at a long-range scale. Moreover, an increase of both the magnetic anisotropy and the exchange interaction, with respect to the Mn-analogue (Fries et al. 1997), has been observed.     

Thermal behaviour of β-anhydrite CaSO<Subscript>4</Subscript> to 1,263 K

The thermal behaviour of β-anhydrite CaSO₄ has been investigated to 1,263 K in-situ real-time using laboratory parallel-beam X-ray powder diffraction data. The cell parameters expanded anisotropically, the c axis being the “softest”. This behaviour is due to the deformation of the CaO₈ polyhedron. In fact the two longest, independent, Ca–O bond distances show a significant component along the z direction.     

Low-temperature heat capacities,entropies and high-pressure phase relations of MgSiO<Subscript>3</Subscript> ilmenite and perovskite

Low-temperature isobaric heat capacities (C _p ) of MgSiO₃ ilmenite and perovskite were measured in the temperature range of 1.9–302.4 K with a thermal relaxation method using the Physical Properties Measurement System. The measured C _p of perovskite was higher than that of ilmenite in the whole temperature range studied. From the measured C _p , standard entropies at 298.15 K of MgSiO₃ ilmenite and perovskite were determined to be 53.7 ± 0.4 and 57.9 ± 0.3 J/mol K, respectively. The positive entropy change (4.2 ± 0.5 J/mol K) of the ilmenite–perovskite transition in MgSiO₃ is compatible with structural change across the transition in which coordination of Mg atoms is changed from sixfold to eightfold. Calculation of the ilmenite–perovskite transition boundary using the measured entropies and published enthalpy data gives an equilibrium transition boundary at about 20–23 GPa at 1,000–2,000 K with a Clapeyron slope of −2.4 ± 0.4 MPa/K at 1,600 K. The calculated boundary is almost consistent within the errors with those determined by high-pressure high-temperature in situ X-ray diffraction experiments.     

Site characterisation of a basin-scale CO<Subscript>2</Subscript> geological storage system: Gippsland Basin,southeast Australia

Geological storage of CO₂ in the offshore Gippsland Basin, Australia, is being investigated by the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC) as a possible method for storing the very large volumes of CO₂ emissions from the nearby Latrobe Valley area. A storage capacity of about 50 million tonnes of CO₂ per annum for a 40-year injection period is required, which will necessitate several individual storage sites to be used both sequentially and simultaneously, but timed such that existing hydrocarbon assets will not be compromised. Detailed characterisation focussed on the Kingfish Field area as the first site to be potentially used, in the anticipation that this oil field will be depleted within the period 2015–2025. The potential injection targets are the interbedded sandstones of the Paleocene-Eocene upper Latrobe Group, regionally sealed by the Lakes Entrance Formation. The research identified several features to the offshore Gippsland Basin that make it particularly favourable for CO₂ storage. These include: a complex stratigraphic architecture that provides baffles which slow vertical migration and increase residual gas trapping and dissolution; non-reactive reservoir units that have high injectivity; a thin, suitably reactive, lower permeability marginal reservoir just below the regional seal providing mineral trapping; several depleted oil fields that provide storage capacity coupled with a transient production-induced flow regime that enhances containment; and long migration pathways beneath a competent regional seal. This study has shown that the Gippsland Basin has sufficient capacity to store very large volumes of CO₂. It may provide a solution to the problem of substantially reducing greenhouse gas emissions from future coal developments in the Latrobe Valley.     

Invasion of anthropogenic CO<Subscript>2</Subscript> recorded in planktonic foraminifera from the northern Gulf of Aqaba

The stable carbon isotopic composition of the planktonic foraminifera Globigerinoides sacculifer and G. ruber (white) and sedimentary organic matter from the northern Gulf of Aqaba have been investigated to estimate changes in ¹³C_DIC in surface waters during the last 1,000 years. The high sedimentation rates at the core sites (about 54 cm/Kyear) provide high temporal resolution (~10 years). Recent sediments at the top of the cores reflect conditions younger than 1950. The ¹³C records of the planktonic foraminifera from three multicores display similar trends, showing a uniform and consistent pattern before the 1750s, and a gradual decrease of approximately 0.63 over the last two centuries. This decrease seems to track the decrease of ¹³C_DIC in surface waters, which is mainly caused by the increase of anthropogenic input of ¹³C-depleted CO₂ into the atmosphere. Similarly, a trend towards lighter values of the carbon isotopic composition of sedimentary organic matter (¹³C_org) during the last 200 years supports the interpretation obtained from the planktonic foraminiferal ¹³C. Furthermore, direct measurements of seawater show that ¹³C of the dissolved inorganic carbon (DIC) in the northern Gulf of Aqaba has decreased by about 0.44 during the period 1979–2000. The average annual decrease is 0.021, which is similar to that observed globally. The ¹³C values of planktonic foraminifera combined with organic matter ¹³C from marine sediments are good indicators for reconstructing past changes in atmospheric CO₂ concentrations from the northern Gulf of Aqaba.     

Time-lapse crosswell seismic and VSP monitoring of injected CO<Subscript>2</Subscript> in a brine aquifer

Seismic surveys successfully imaged a small scale CO₂ injection (1,600 ton) conducted in a brine aquifer of the Frio Formation near Houston, Texas. These time-lapse borehole seismic surveys, crosswell and vertical seismic profile (VSP), were acquired to monitor the CO₂ distribution using two boreholes (the new injection well and a pre-existing well used for monitoring) which are 30 m apart at a depth of 1,500 m. The crosswell survey provided a high-resolution image of the CO₂ distribution between the wells via tomographic imaging of the P-wave velocity decrease (up to 500 m/s). The simultaneously acquired S-wave tomography showed little change in S-wave velocity, as expected for fluid substitution. A rock physics model was used to estimate CO₂ saturations of 10–20% from the P-wave velocity change. The VSP survey resolved a large (∼70%) change in reflection amplitude for the Frio horizon. This CO₂ induced reflection amplitude change allowed estimation of the CO₂ extent beyond the monitor well and on three azimuths. The VSP result is compared with numerical modeling of CO₂ saturations and is seismically modeled using the velocity change estimated in the crosswell survey.     

Thermal decomposition of NH<Subscript>4</Subscript><Superscript>+</Superscript>-vermiculite from Santa Olalla (Huelva,Spain) and its relation to the metal ion distribution in the octahedral sheet

The investigation of the NH₃ loss in the NH₄⁺-vermiculite (Santa Olalla) by thermogravimetry, evolved gas analysis, chemical analysis, X-ray diffraction and IR spectroscopy is reported here. The mass loss during heating takes place in two steps at about 650 and 825 °C. Additionally, the releases of H₂O and NH₃ occurs simultaneously. The experimental results indicate that the protons remaining in the interlayer space after NH₃ removal trigger the H₂O release. X-ray diffraction shows that during the decomposition of NH₄⁺-vermiculite there are two domains with different interlayer spaces at ~9 and ~10 Å. As the decomposition proceeds, the intensity of the 9 Å peak increases at the expense of the second one. The change in the IR-stretching modes of the structural OH groups during heating indicates that the OH groups surrounded by 3Mg²⁺ or 2Mg²⁺Fe²⁺ are released at lower temperatures than those with environments like 2Mg²⁺Fe³⁺, 2Mg²⁺Al³⁺ or more complex ones.     

<Emphasis Type="Italic">P</Emphasis>–<Emphasis Type="Italic">T</Emphasis> and fluid evolution of barren and lithium pegmatites from Vlastějovice,Bohemian Massif,Czech Republic

Fluid inclusions, mineral thermometry and stable isotope data from two types of mineralogically and texturally contrasting pegmatites, barren ones and lithium ones, from the Moldanubian Zone of the Bohemian Massif were studied in order to constrain P–T conditions of their emplacement, subsolidus hydrothermal evolution and to estimate composition of the early exsolved fluid and that of the parental melt. Despite the fact that the lithium pegmatites are abundant throughout the crystalline units of the Bohemian Massif, data similar to this paper have not been published yet. The studied pegmatites are hosted by iron-rich calcic skarn bodies. This specific setting allowed scavenging of calcium, fluorine and some other elements from the host rocks into the pegmatitic melts and post-magmatic fluids. Such contamination process was important namely in the case of barren pegmatites, as can be deduced from the variation in anorthite contents in plagioclase and from the presence of fluorite, hornblende (with F content) or garnet in the contact zones of pegmatite dykes. Fluid inclusions were studied mostly in quartz, but also in fluorite, titanite and apatite. Early aqueous–carbonic and late aqueous fluids were identified in both pegmatite types. The P–T conditions of crystallization as well as the detailed composition of exsolved magmatic fluid, however, particularly differ. The magmatic fluids associated with barren pegmatites correspond to H₂O–CO₂ low salinity fluids, composition of which evolved from 20 to 23 to <5 mol% CO₂, and from 2 to 4–6 mol% NaCl eq. Sudden decrease in the CO₂ content of the post-magmatic fluids (<5 mol% CO₂) seems to coincide with the enrichment of the fluid in calcium (from the contamination process) and resulted in precipitation of calcites (frequently found as trapped solid phases in fluid inclusions). The fluids associated with lithium pegmatites are more complex (H₂O–CO₂/N₂–H₃BO₃–NaCl). The CO₂ content of early exsolved fluid is 26–20 mol% CO₂ and remains the same in the next fluid generation. The main difference between the magmatic and the first post-magmatic fluids is the presence of 7–9 wt% of H₃BO₃ (identified as daughter mineral sassolite) in the former. The second post-magmatic fluids are again CO₂-poor (∼4 mol%) and more saline (∼4 mol% NaCl eq.). The composition of exsolved fluid was further used to constrain volatile composition and content of the parental melts. Finally, P–T conditions of pegmatite crystallization are constrained: 600–640°C and 420–580 MPa for the barren pegmatites and 500–570°C and 310–430 MPa for the lithium pegmatite. While the emplacement of the former occurred in thermal equilibrium with the Moldanubian host rock environment, the emplacement of the later suggests substantial thermal disequilibrium.     

High-T phase transition of synthetic ANaB(LiMg)CMg5Si8O22(OH)2 amphibole: an X-ray synchrotron powder diffraction and FTIR spectroscopic study

The synthetic amphibole Na_0.95(Li_0.95Mg_1.05)Mg₅Si₈O₂₂(OH)₂ was studied in situ at high-T, using IR OH-stretching spectroscopy and synchrotron X-ray powder diffraction. At room-T the sample has P2₁ /m symmetry, as shown by the FTIR spectrum. It shows in the OH region two well-defined and intense absorptions at 3,748 and 3,712 cm⁻¹, respectively, and two minor bands at 3,667 and 3,687 cm⁻¹. The main bands are assigned to the two independent O–H groups in the primitive structure. The two minor bands evidencing the presence of small amount of vacant A-site (^A□_0.05). With increasing T, these bands shift continuously and merge into a unique absorption at high temperature. A change as a function of increasing T is revealed by the evolution of the refined unit-cell parameters, whose trend shows a transition to C2/m at about 320–330°C. The spontaneous scalar strain, fitted with a tricritical 2–6 Landau potential, gives a T _c of 325(10)°C (β parameter = 0.27). Comparison with the second-order P2₁ /m ⇔ C2/m phase transition at 255°C for synthetic amphibole ^ANa_0.8^B(Na_0.8Mg_1.2)^CMg₅Si₈O₂₂(OH)₂ indicates that the substitution of Na with Li at the B-sites strongly affects the thermodynamic character and the T _c of the phase transition. The comparison of LNMSH amphiboles with cummingtonitic ones shows that the high-T thermodynamic behaviour is affected by A-site occupancy.     

Heat capacity and phase equilibria of wadeite-type K2Si4O9

The low-temperature heat capacity (C _p) of Si-wadeite (K₂Si₄O₉) synthesized with a piston cylinder device was measured over the range of 5–303 K using the heat capacity option of a physical properties measurement system. The entropy of Si-wadeite at standard temperature and pressure calculated from the measured heat capacity data is 253.8 ± 0.6 J mol⁻¹ K⁻¹, which is considerably larger than some of the previous estimated values. The calculated phase transition boundaries in the system K₂O–Al₂O₃–SiO₂ are generally consistent with previous experimental results. Together with our calculated phase boundaries, seven multi-anvil experiments at 1,400 K and 6.0–7.7 GPa suggest that no equilibrium stability field of kalsilite + coesite intervenes between the stability field of sanidine and that of coesite + kyanite + Si-wadeite, in contrast to previous predictions. First-order approximations were undertaken to calculate the phase diagram in the system K₂Si₄O₉ at lower pressure and temperature. Large discrepancies were shown between the calculated diagram compared with previously published versions, suggesting that further experimental or/and calorimetric work is needed to better constrain the low-pressure phase relations of the K₂Si₄O₉ polymorphs. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Stability of (Cs,K)Al<Subscript>4</Subscript>Be<Subscript>5</Subscript>B<Subscript>11</Subscript>O<Subscript>28</Subscript> (londonite) at high pressure and high temperature: a potential neutron absorber material

The stability and the thermo-elastic behaviour of a natural londonite

On CO<Subscript>2</Subscript> fluid flow and heat transfer behavior in the subsurface,following leakage from a geologic storage reservoir

Geologic storage of CO₂ is expected to produce plumes of large areal extent, and some leakage may occur along fractures, fault zones, or improperly plugged pre-existing wellbores. A review of physical and chemical processes accompanying leakage suggests a potential for self-enhancement. The numerical simulations presented here confirm this expectation, but reveal self-limiting features as well. It seems unlikely that CO₂ leakage could trigger a high-energy run-away discharge, a so-called “pneumatic eruption,” but present understanding is insufficient to rule out this possibility. The most promising avenue for increasing understanding of CO₂ leakage behavior is the study of natural analogues.     

Decomposition of kyanite and solubility of Al2O3 in stishovite at high pressure and high temperature conditions

In order to constrain the high-pressure behavior of kyanite, multi-anvil experiments have been carried out from 15 to 25 GPa, and 1,350 to 2,500°C. Both forward and reversal approaches to phase equilibria were adopted in these experiments. We find that kyanite breaks down to stishovite + corundum at pressures above ∼15 GPa, and stishovite + corundum should be the stable phase assemblage at the pressure–temperature conditions of the transition zone and the uppermost part of the lower mantle of the Earth, in agreement with previous multi-anvil experimental studies and ab initio calculation results, but in disagreement with some of the diamond-anvil cell experimental studies in the literature. The Al₂O₃ solubility in nominally dry stishovite has been tightly bracketed by forward and reversal experiments; it is slightly but consistently reduced by pressure increase. Its response to temperature increase, however, is more complicated: increases at low temperatures, maximizes at around 2,000°C, and perhaps decreases at higher temperatures. Consequently, the Al₂O₃ solubility in dry stishovite at conditions of high temperature–high pressure is very limited.     

Dissolution of Carbonate Sediments Under Rising <Emphasis Type="Italic">p</Emphasis>CO<Subscript>2</Subscript> and Ocean Acidification: Observations from Devil’s Hole,Bermuda

Rising atmospheric pCO₂ and ocean acidification originating from human activities could result in increased dissolution of metastable carbonate minerals in shallow-water marine sediments. In the present study, in situ dissolution of carbonate sedimentary particles in Devil’s Hole, Bermuda, was observed during summer when thermally driven density stratification restricted mixing between the bottom water and the surface mixed layer and microbial decomposition of organic matter in the subthermocline layer produced pCO₂ levels similar to or higher than those levels anticipated by the end of the 21st century. Trends in both seawater chemistry and the composition of sediments in Devil’s Hole indicate that Mg-calcite minerals are subject to selective dissolution under conditions of elevated pCO₂. The derived rates of dissolution based on observed changes in excess alkalinity and estimates of vertical eddy diffusion ranged from 0.2 mmol to 0.8 mmol CaCO₃ m⁻² h⁻¹. On a yearly basis, this range corresponds to 175–701 g CaCO₃ m⁻² year⁻¹; the latter rate is close to 50% of the estimate of the current average global coral reef calcification rate of about 1,500 g CaCO₃ m⁻² year⁻¹. Considering a reduction in marine calcification of 40% by the year 2100, or 90% by 2300, as a result of surface ocean acidification, the combination of high rates of carbonate dissolution and reduced rates of calcification implies that coral reefs and other carbonate sediment environments within the 21st and following centuries could be subject to a net loss in carbonate material as a result of increasing pCO₂ arising from burning of fossil fuels.