Anisotropy of magnetic susceptibility variations in Icelandic columnar basalts

The anisotropy of magnetic susceptibility (AMS) has been determined for 81 samples from eleven horizontal columnar segments from two Icelandic near-vertical dikes. Near-vertical orientation of short AMS axes and corresponding long-axis horizontal orientations in most columns represents alignments consistent with compactive effects due to vertically directed forces exerted by overlying columns. These data are inconsistent with primary orientations resulting from thermal contractive stresses, but such stresses may be responsible for the secondary orientations observed.     

Internal flow structures in columnar jointed basalt from Hrepphólar, Iceland: II. Magnetic anisotropy and rock magnetic properties

The anisotropy of magnetic susceptibility (AMS) and rock magnetic properties were measured on specimens from a basalt plate that was cut from a vertical section of a basalt column from Hrepphólar, Iceland. Macroscopic structures are clearly distinguishable in the plate, including banding inferred to represent viscous fingering parallel to the vertical axis of the column. Rock magnetic experiments indicate that the dominant ferromagnetic (sensu lato) mineral is titanomagnetite, Fe _3?x Ti _x O₄, with a Ti-composition of x?=?~0.6. Magnetic properties are related to the position within the plate and reveal a dominant volume fraction of single domain titanomagnetite in the center of the basalt column, with multidomain titanomagnetite away from the center. The AMS determined by low-field measurements shows an inconclusive relationship with the visual structures, which arises from variation of the grain size (i.e., single domain versus multidomain) across the column. In contrast, the AMS measured with a high-field torsion magnetometer avoids the complication of magnetic domain state, as is demonstrated in this contribution, and additionally allows for the separation of ferrimagnetic from paramagnetic sub-fabrics. Both sub-fabrics display a clear relationship with the macroscopic structures and support the hypothesis that vertical flow of melt took place during development of the Hrepphólar columnar basalt. Maximum susceptibility axes of the ferrimagnetic sub-fabric are grouped near the vertical axis of the column. The paramagnetic sub-fabric varies systematically across the column in coincidence with internal structure. The shape of the magnetic susceptibility ellipsoid varies across the basalt column, showing an increasingly prolate fabric toward its center.     

Microstructure and magnetic fabric in the Shuanghe pluton: A synkinematic granite in Eastern Dabie Mountains,China

Strain analyses for the Shuanghe pluton show that the main strain planes suffered distinct deformation. The main strain value (XZ) is up to 1.59-2.18, and the value of Flinn index (K) ranges from 0.11 to 0.82. Anisotropy of magnetic susceptibility (AMS) measurements reveal that the orientations of the magnetic foliation and lineation gently dip SE, consistent with the macroscopic foliation of the pluton. The value of anisotropy degree (P) ranges from 1.109 to 1.639, and the shape parameter (7) from 0.079 to 0.534. These studies prove that the pluton was deformed under strong compression. Quartz c-axis textures, defined by monoclinic or triclinic asymmetry, usually developed the high maxima paralleling the b-axis, which is defined by the developed in the high-ultrahigh pressure rocks (UHP) which were captured in the pluton or country rocks. It is concluded that the Shuanghe pluton emplaced under regional compression slightly after the formation of UHP, and it is characterized by synkinematic granitic deformation.     

磁化率各向异性与花岗岩形成的构造背景──以广东两类不同成因类型花岗岩为例

广东省两类不同成因类型花岗岩磁化率各向异性研究表明：Ⅰ型花岗岩的磁化率的数值较大，一致性较好；各向异性度比较小，磁化率椭球为纯压扁型．Ｓ型花岗岩的磁化率数值普遍较小，一致性较差；各向异性度比较大，磁化率椭球以兼具压扁型和拉长型为特征；岩体内部两种磁化率椭球（压扁型和拉长型）的３个主轴的方向具有较好的一致性．结合花岗岩的野外地质特征，作者认为，Ｓ型花岗岩在形成过程中受到了板块内部强烈的挤压和剪切作用，不同类型的源岩在强烈的挤压作用下局部地带发生破裂，发育了大规模的剪切推覆作用，在剪切热的作用下源岩物质被改造形成Ｓ型花岗岩；Ⅰ型花岗岩则是原始岩浆侵入到地壳上部形成，其形成的构造背景与当时板块的Ｂ型俯冲有关。     

秦祁接合带造山缝合带磁组构特征及其构造意义

结合构造及磁化率各向异性研究详细解剖了秦祁接合带唐藏—关子镇—武山和新阳—元龙造山缝合带的应变及岩组特征.41个采点168个构造岩样品的平均磁化率全部较低,磁化率椭球形态分析表明其以平面和压扁应变为主,磁化率各向异性度普遍较高,属强变形岩石组构类型,结合野外观察认为其与变形强度明显正相关.此外,磁化率各向异性参数T、P′可能受岩石类型一定程度的影响.磁化率椭球主轴方位与变形密切相关,提供了丰富的岩组信息.两构造带具有类似的岩组特征,磁面理大致分为呈共轭形态的两组,暗示高应变剪切带在平面上可能以网格状形态出露;高倾伏角磁面理与占优势的低倾伏角、近水平磁线理表明了构造带明显的走滑特征,部分高角度磁线理可能与构造带的挤压和（或）转换挤压相关;磁组方法不能简单用于判别复杂强变形带的运动指向,糜棱面理的复杂变化及K_min与构造带夹角过高使其判别结果意义不明,而野外及显微构造观察都表明了构造带的右行走滑特征.上述结果表明,沿缝合带大规模的右行转换挤压形成了秦祁接合带反“S”型的平面构造形态,暗示在南北板块拼合过程中,西秦岭诸中、小块体一定程度的向西挤逸.     

Anisotropy of magnetic susceptibility of rocks in the Rayleigh Law region: Modelling errors arising from linear fit to non-linear data

The anisotropy of magnetic susceptibility (AMS) within the Rayleigh Law range was investigated theoretically, using mathematical modelling. It was revealed that the orientations of the principal susceptibilities and the shape parameter vary with field so weakly that these variations can be regarded as negligible from the practical point of view. The degree of AMS increases with field according to the degree of anisotropy of the initial susceptibility used and according to the intensity of susceptibility change with field of the mineral considered. The degree of AMS calculated using linear theory is very near to the degree of AMS following from the analysis of AMS within the Rayleigh Law range. If it is desirable to correct the field-dependent degree of AMS, a simple technique is suggested based on measurement of the AMS in two fields. fhrouda@agico.cz     

Anisotropy of magnetic susceptibility parameters: Guidelines for their rational selection

Twenty-eight parameters used to characterize measurements of the anisotropy of magnetic susceptibility are compared theoretically in this work by introducing the concept of the field of susceptibility tensors, which allows the representation of parameters as families of lines in a plane. It is demonstrated that the foliation and lineation parameters are but a special case of the shape parameters, implying that the resolution of these two rock fabric elements using AMS measurements alone is more an artifact of the numerical range of definition of some parameters than a quantification of two physically independent features. Also, it is shown that parameters presumably of the same type do not necessarily yield equivalent interpretation of results in a qualitative sense, and therefore, caution should be strongly exercised when parameters are to be selected. Paramters quantifying the degree of anisotropy are, in general, equivalent to each other because of the very small departure observed in natural rocks from the isotropic case. However, a final consideration of the possible ability to differentiate rock types and a convenient range of values allowing expression of the degree of anisotropy in a well-defined percentage are pointed out as the main factors to be considered before selecting one parameter within this class.     

The anisotropy of magnetic susceptibility of lava flows: an experimental approach

Measurements of the anisotropy of magnetic susceptibility (AMS) of natural lavas have shown that AMS varies with depth within a lava flow. We have investigated the reasons for such variation by studying the effects of temperature and strain rate on the AMS of recent lava in the laboratory. Samples of lava from Kilauea were melted and subjected to a range of strain rate and cooling histories. The results show that the degree of anisotropy is a function of both the thermal and shearing history of a sample. High degrees of anisotropy were found only in samples that were deformed at temperatures close to those encountered during eruption and then rapidly quenched. Lavas subjected to similar shear stresses at high temperatures had low degrees of anisotropy if allowed to cool down slowly without further deformation. Additionally, lava subjected to complex shearing yield a lower degree of anisotropy even when high strain rates were imposed on it. These results lead to the conclusion that only the last phase of deformation is detectable using AMS and that high strain rates will not result in high degrees of anisotropy if either deformation ends while lava is still fluid or if the orientation of the maximum shear stress varies with time. The relation between the orientation of the principal susceptibilities and that of shear is less sensitive to variation on shear with time. Consequently, flow directions can be inferred confidently with this type of measurements.     

Magnetic fabrics of the Bloodgood Canyon and Shelley Peak Tuffs,southwestern New Mexico: implications for emplacement and alteration processes

Anisotropy of magnetic susceptibility (AMS) of the middle Tertiary Bloodgood Canyon and Shelley Peak Tuffs of the Mogollon-Datil volcanic field has been used to (1) evaluate the ability of AMS to constrain flow lineations in low-susceptibility ash-flow tuffs; (2) establish a correlation between magnetic fabric, magnetic mineralogy, tuff facies, and characteristics of the depositional setting; and (3) constrain source locations of the tuffs. The tuffs are associated with the overlapping Bursum caldera and Gila Cliff Dwellings basin. The high-silica Bloodgood Canyon Tuff fills the Gila Cliff Dwellings basin and occurs as thin outcrops outside of the basin. The older Shelley Peak Tuff occurs as thin outcrops both along the boundary between the two structures, and outside of the complex. AMS data were collected from 16 sites of Bloodgood Canyon Tuff basin fill, 19 sites of Bloodgood Canyon Tuff outflow, and 11 sites of Shelley Peak Tuff. Sites were classified on the basis of within-site clustering of orientations of principal susceptibility axes, based on the categories of Knight et al. (1986). Most microscopically visible oxide minerals in the Bloodgood Canyon Tuff outflow and basin fill, and in the Shelley Peak Tuff are members of the hematite-ilmenite solid solution series. However, IRM acquisition data indicate that Bloodgood Canyon Tuff basin fill and Shelley Peak Tuff have magnetic mineralogy dominated by single- or pseudo-single-domain magnetite, and that the magnetic mineralogy of the Bloodgood Canyon Tuff outflow is dominated by hematite. Hematite in Bloodgood Canyon Tuff outflow is likely to be the result of deuteric and/or low-temperature alteration of magnetite and iron silicate minerals. Bulk magnetic susceptibility is higher in magnetite-dominated ash-flow tuff (Bloodgood Canyon Tuff basin fill and Shelley Peak Tuff) than it is in hematite-dominated ash-flow tuff (Bloodgood Canyon Tuff outflow). Bloodgood Canyon Tuff outflow has the highest total anisotropy (H) of the three units, followed by Shelley Peak Tuff and Bloodgood Canyon Tuff basin fill. All three ash-flow tuffs are genearlly characterized by oblate susceptibility ellipsoids, with those of the Bloodgood Canyon Tuff basin fill nearest to spherical. At high values of total anisotropy, Shelley Peak Tuff susceptibility ellipsoids attain a prolate shape; those of Bloodgood Canyon Tuff outflow attain an increasingly oblate shape. Three factors may influence differences in total anisotropy and susceptibility ellipsoid shape: (1) ash which travelled the greatest distance before deposition may show the best development of magnetic fabric, particularly of magnetic lineation; (2) deposition of ash in a closed basin may inhibit laminar flow throughout the sheet and the resulting development of flow textures; and (3) replacement of magnetite and iron silicates preferentially oriented within the foliation plane by hematite with strong crystalline anisotropy may enhance the magnetic susceptibility within that plane. Scatter in AMS axis orientation within sites may result from: (1) greater orientation inaccuracy in block-sampled than in fielddrilled samples; (2) rheomorphism; and (3) low accuracy of AMS measurement in low-susceptibility ashflow tuffs. Evaluation of flow lineation based on AMS of sites with well-clustered K ₁ axes indicates that (1) Bloodgood Canyon Tuff basin fill flowed along a generally northwest-southeast azimuth; (2) Shelley Peak Tuff located on the boundary of the Bursum caldera and the Gila Cliff Dwellings basin flowed along a nearly east-west azimuth; and (3) Bloodgood Canyon Tuff outflow sites have K ₁ susceptibility axes generally radial to the Bursum-Gila Cliff Dwellings complex, but within-site scatter of K ₁ orientations is generally too large to draw conclusions about flow lineation orientation. Limited petrographic work on pilot thin sections adds flow direction information to AMS-derived flow lineation information.     

Magma flow revealed by magnetic fabric in the Okavango giant dyke swarm, Karoo igneous province, northern Botswana

To determine the magma flow direction of the giant, 179 Ma Okavango dyke swarm of northern Botswana, we measured the anisotropy of magnetic susceptibility (AMS) of 23 dykes. Dykes are located in two sections (Shashe and Thune Rivers), which are about 300 km and 400 km from the presumed magma source respectively; the Nuanetsi triple point. We collected samples from the margins of the dykes in order to use the imbrication of magnetic foliation to determine magma flow direction. About half of the magnetic fabric in the dykes is inverse, i.e. with the magnetic foliation perpendicular to the dyke plane. Lateral flow to the west and vertical flow is in evidence in the Shashe section. However, the overall analysis of normal and inverse magnetic fabric data supports that lateral flow to the west was dominant in the Shashe section. Across the Thune section, a poorly defined imbricated magnetic foliation also suggests lateral flow to the west.     

Changes of anisotropy of the magnetic susceptibility of rocks induced by a magnetic field

Summary The changes of the anisotropy of magnetic susceptibility of igneous rocks, induced by a magnetic field, are studied. It is proved that changes in the degree of anisotropy of susceptibility and of the orientation of the susceptibility ellispoid of specimens occur due to the configuration of the domain structure under the effect of the magnetic field. The influence of this effect on the total anisotropy of rocks depends on the degree of anisotropy due to the shape factor and on the stability of the domain structure. A model concept is presented, explaining the qualitatively different pattern of the changes of the anisotropy of susceptibility under the effect of the magnetic field in various directions of the specimens.     

Anisotropies of in-phase,out-of-phase,and frequency-dependent susceptibilities in three loess/palaeosol profiles in the Czech Republic; methodological implications

The relationship between the anisotropy of frequency-dependent magnetic susceptibility (fdAMS) and the anisotropy of out-of-phase magnetic susceptibility (opAMS) was investigated theoretically and also empirically at three loess/palaoesol profiles in Prague and in Southern Moravia. The data treatment was made in terms of mean susceptibility, degree of AMS, and orientations of principal susceptibilities. It has shown that the fdAMS and opAMS can serve as indicators of the preferred orientations of ultrafine magnetic particles that are on transition between superparamagnetic and stable single domain states in rocks, soils and environmental materials. In loess/palaeosol sequences, the fdAMS and opAMS correlate reasonably, because they are due to magnetic particles of similar grain sizes. The fdAMS and opAMS can be both coaxial with standard AMS (i.e. anisotropy of in-phase susceptibility - ipAMS) or non-coaxial indicating slightly different orientations of viscous magnetic particles.     

Alteration induced changes of magnetic fabric as exemplified by dykes of the Koolau volcanic range

We studied 93 samples from 8 basaltic dykes of the Koolau volcanic range on the island of Oahu,Hawaii,USA,to determine the influence of hydrothermal alteration on the magnetic fabric as determined by anisotropy of magnetic susceptibility (AMS) measurements. Rock magnetic as well as microscopic investigations show that only ≈25% of the samples have retained their original magnetomineralogical composition of unaltered Ti-poor titanomagnetite. The remaining samples have undergone hydrothermal alteration which transformed the primary magnetic phase into a granular intergrowth of titanomagnetite, titanomaghemite and hematite. In both sample groups,this magnetic phase occurs in coarse (tens of microns),irregularly shaped particles as well as interstitial clusters of smaller (< 5 μm) grains. Our investigations show that hydrothermal alteration does change the bulk susceptibility and the degree of anisotropy but not the directions of principal axes of the AMS ellipsoid which are predominantly corresponding to normal magnetic fabric. The stability of AMS directions, regardless of the degree of alteration, points towards the model of distribution anisotropy as the controlling factor for the observed magnetic fabric.     

New insights into asymmetric folding by means of the anisotropy of magnetic susceptibility,Variscan and Pyrenean folds (SW Pyrenees)

Magnetic fabric allows to unravel the petrofabrics of sedimentary rocks and to assess their deformational history. The use of this technique, in addition to classical structural field observations in the limbs of seven asymmetric folds in the Pyrenees, helps to determine the differences of internal deformation as well as the folding kinematics. Three folds developed during the Variscan Orogeny in Ordovician and Devonian rocks, and four folds developed during the Pyrenean Orogeny in Eocene rocks, are studied. Folds show a variety of structural locations, in different thrust sheets of the Southern Central Pyrenees, different cleavage development, age, geometry and lithology. Sampling follows an equivalent lithological layer in the two limbs, except for one case, of the selected folds. Results show a modified tectonic magnetic fabric in most sites with the magnetic lineation on the tectonic foliation plane. A larger scattering of the magnetic lineation (maximum magnetic anisotropy axis) and a higher intensity of the preferred orientation of minerals (eccentricity of the anisotropy of magnetic susceptibility - AMS ellipsoid) is better observed in the overturned (short) limb of the asymmetric Variscan folds than in the normal (long) limb. On the other hand, the shape parameter in Alpine folds is generally larger in the overturned (short) limb then in the normal (long) one. A good clustering of the minimum magnetic anisotropy axes is observed in all limbs. The combination of the AMS data with the structural data helps to understand and better constrain the deformation degree in these asymmetric folds and to unravel the deformational history.     

Influence of magnetic interactions on the anisotropy of magnetic susceptibility: the case of single domain particles packed in globule aggregates

The influence of magnetic interactions on the anisotropy of magnetic susceptibility (AMS) have been largely studied by several theoretical models or experiments. Numerical models have shown that when magnetostatic interactions occur, the distributions of particles over the volume rather than their individual orientations control the AMS. We have shown recently from a comprehensive rock magnetic study and from a theoretical 2-dimensional (2-D) model that single domain particles closely packed in globule aggregates could produce strong local random interaction magnetic fields which could influence the magnetic susceptibility and decrease the degree of anisotropy. In this paper, we first present in detail this 2-D theoretical model and then we extend it to the 3-D case. The possible distribution function of the magnetostatic interaction fields comprises two extreme states: it is either isotropic or ordered. The former case corresponds to the thermal-demagnetized state while the second case corresponds to the alternating field (AF) demagnetized state. We show that when easy axes of magnetization are not uniformly distributed, the degree of anisotropy decreases as the interaction field increases in both AF- and thermal-demagnetized states in 2-D and 3-D geometry. Thus we conclude that random magnetic fields generated by a random arrangement of magnetic particles over the sample volume decrease the degree of anisotropy of AMS and may alter the magnetic fabric.     

The internal structure of lava flows—insights from AMS measurements II: Hawaiian pahoehoe, toothpaste lava and 'a'

We studied the anisotropy of magnetic susceptibility (AMS) of 22 basaltic flow units, including S-type pahoehoe, P-type pahoehoe, toothpaste lava and 'a' emplaced over different slopes in two Hawaiian islands. Systematic differences occur in several aspects of AMS (mean susceptibility, degree of anisotropy, magnetic fabric and orientation of the principal susceptibilities) among the morphological types that can be related to different modes of lava emplacement. AMS also detects systematic changes in the rate of shear with position in a unit, allowing us to infer local flow direction and some other aspects of the velocity field of each unit. 'A' flows are subject to stronger deformation than pahoehoe, and also their internal parts behave more like a unit. According to AMS, the central part of pahoehoe commonly reveals a different deformation history than the upper and lower extremes, probably resulting from endogenous growth.     

Role of single-domain magnetic particles in creation of inverse magnetic fabrics in volcanic rocks: A mathematical model study

The role of single-domain (SD) magnetic particles in creation of inverse magnetic fabrics is investigated on simple mathematical models using a realistic estimate for SD intrinsic susceptibility. In contrast to the fraction created by multi-domain (MD) particles, in which the anisotropy of magnetic susceptibility (AMS) is controlled by both the grain AMS and intensity of the preferred orientation of the particles, the AMS of the SD fraction is controlled solely by the intensity of the preferred orientation. The degree of AMS of ensemble of SD grains with a preferred orientation is therefore much higher than that of the same ensemble of MD particles implying the existence of frequent inverse magnetic fabrics. However, the occurrence of inverse magnetic fabrics due to SD particles is more the exception than the rule. Consequently, the amounts of SD particles is probably in general low. Nevertheless, the presence of SD particles in amounts insufficient to create inverse magnetic fabrics may diminish the whole rock AMS substantially. This can be one of the reasons for relatively low AMS in volcanic rocks whose magnetic particles may be really small obeying the conditions for the existence of SD particles.     

Magnetic properties and paleoclimatic implications of loess-paleosol

Detailed rock magnetic investigations and X-ray diffraction (XRD)were carried out on loess-paleosol sequences of the last interglacial-glacial at Znojmo section in Czech Republic. The results indicate that pedogenesis causes susceptibility enhancement in the paleosols, which is similar to that observed in the Chinese Loess Plateau. k-T curves, IRM, and XRD show that magnetite is the dominant magnetic mineral in the loess-paleosol sequences at the Znojmo section, while maghemite, hematite, and pyrite/pyrrhotite are minor minerals. Measurements of anisotropy of magnetic susceptibility (AMS) indicate that the magnetic lineation is smaller than the foliation. The susceptibility ellipsoids are oblate and the directions of the maximum principal axes (Kmax) are distributed randomly, and cannot be used to determine the paleo-wind direction.     

Track of fluid paleocirculation in dolomite host rock at regional scale by the Anisotropy of Magnetic Susceptibility (AMS): An example from Aptian carbonates of La Florida,Northern Spain

The present study aims to apply the AMS method (Anisotropy of Magnetic Susceptibility) at a regional scale to track the fluid circulation direction that has produced an iron metasomatism within pre-existing dolomite host rock. The Urgonian formations hosting the Zn–Pb mineralizations in La Florida (Cantabria, northern Spain) have been taken as target for this purpose. Sampling was carried out, in addition to ferroan dolomite host rock enclosing the Zn–Pb mineralizations, in dolomite host rock and limestone to make the comparison possible between magnetic signals from mineralized rocks, where fluid circulation occurred, and their surrounding formations. AMS study was coupled with petrofabric analysis carried out by texture goniometry, Scanning Electron Microscopy (SEM) observations and also Shape Preferred Orientation (SPO) statistics. SEM observations of ferroan dolomite host rock illustrate both bright and dark grey ribbons corresponding respectively to Fe enriched and pure dolomites. SPO statistics applied on four images from ferroan dolomite host rock give a well-defined orientation of ribbons related to the intermediate axis of magnetic susceptibility K₂. For AMS data, two magnetic fabrics are observed. The first one is observed in ferroan dolomite host rock and characterized by a prolate ellipsoid of magnetic susceptibility with a vertical magnetic lineation. The magnetic susceptibility carrier is Fe-rich dolomite. These features are probably acquired during metasomatic fluid circulations. In Fe-rich dolomite host rock, ?c? axes are vertical. As a rule, (0001) planes (i.e. planes perpendicular to ?c? axes) are isotropic with respect to crystallographic properties. So, the magnetic anisotropy measured in this plane should reflect crystallographic modification due to fluid circulation. This is confirmed by the texture observed using the SEM. Consequently, AMS results show a dominant NE–SW elongation interpreted as the global circulation direction and a NW–SE secondary elongation that we have considered as sinuosities of the fluid trajectory. The second type of magnetic fabric is essentially observed in the limestone and characterized by an oblate form of the ellipsoid of magnetic susceptibility, a horizontal magnetic foliation and mixed magnetic susceptibility carriers. It is interpreted as a sedimentary fabric.     

Magnetic anisotropy of limestones from Limhamn,Southern Sweden

Summary The magnetic fabric of the Limhamn limestones is characterized by a low initial magnetic susceptibility. Of 68 specimens with a positive susceptibility, 10 show a distinct anisotropy. In nine of these, the axes of minimum susceptibility are practically normal to the magnetic foliation plane. The observed anisotropy pattern has some resemblance to a magnetic fabric acquired by deposition under influence of currents. A post-depositional origin due to gravitational compaction seems, however, more probable.Presented at 2nd conference on New Trends in Geomagnetrsm, Castle of Bechyn, Czechoslovakia, September 24–29, 1990.