多尺度地理空间点群目标相似关系的计算研究

研究多尺度地理空间点群目标相似关系的计算问题.基于4类点群信息,将点群目标包含的信息重新分成统计信息、专题信息、拓扑信息、几何信息和度量信息,这5类信息是影响点群相似性程度的主要因子.根据这5类信息描述参数的特点,给出了各个因子的相似度计算公式,建立了多尺度地理空间点群目标相似关系的计算模型,并通过算例验证了该模型的可行性与有效性,为地图综合质量的评价提供了一种新方法.     

黄河下游堤内滩地土地利用的GIS分析

应用航空彩红外土地利用解译图,以ARC INFO为支撑软件,建立了黄河下游河道滩地(花园口至孙口河段)土地利用现状数据库。通过空间拓朴叠加分析,得到不同类型滩地的土地利用状况。并以数字高程模型为基础,本文分析土地利用与河道滩地的空间分布规律。     

Identifying strengths and limitations of pan-European forest cover maps through spatial comparison

Detailed and harmonized information on spatial forest distribution is an essential input for forest-related environmental assessments, in particular, for biomass and growing stock modeling. In the last years, several mapping approaches have been developed in order to provide such information for Europe in a harmonized way. Each of these maps exhibits particular properties and varies in accuracy. Yet, they are often used in parallel for different modeling purposes. A detailed spatial comparison seemed necessary in order to provide information on the advantages and limitations of each of these forest cover maps in order to facilitate their selection for modeling purposes.

This article confronts the high-resolution forest cover map recently developed by the Joint Research Centre for the year 2000 (FMAP2000) with previously existing maps for the same time period: the CORINE Land Cover 2000 (CLC2000) and the Calibrated European Forest Map 1996 (CEFM1996). The spatial comparison of these three maps was carried out based on forest proportion maps of 1 km derived from the original maps. To characterize differences according to biogeographic regions, two criteria were used: detail of thematic content within each map and local spatial agreement.

Concerning thematic content, CLC2000 displayed a surfeit of non-forested areas at the cost of low forest proportions, while FMAP2000 showed a more balanced distribution likely to preserve more detail in forest spatial pattern. Good spatial agreement was found for CLC2000 and FMAP2000 within about 70% of the study area, while only 50% agreement was found when compared with CEFM1996. The largest spatial differences between all maps were found in the Alpine and Mediterranean regions. Reasons for these might be different input data and classification techniques and, in particular, the calibration of CEFM1996 to reported national statistics.     

A scale-explicit model for checking directional consistency in multi-resolution spatial data

Multi-resolution spatial data always contain the inconsistencies of topological, directional, and metric relations due to measurement methods, data acquisition approaches, and map generalization algorithms. Therefore, checking these inconsistencies is critical for maintaining the integrity of multi-resolution or multi-source spatial data. To date, research has focused on the topological consistency, while the directional consistency at different resolutions has been largely overlooked. In this study we developed computation methods to derive the direction relations between coarse spatial objects from the relations between detailed objects. Then, the consistency of direction relations at different resolutions can be evaluated by checking whether the derived relations are compatible with the relations computed from the coarse objects in multi-resolution spatial data. The methods in this study modeled explicitly the scale effects of direction relations induced by the map generalization operator – merging, thus they are efficient for evaluating consistency. The directional consistency is an essential complement to topological and object-based consistencies.     

A metaheuristic approach for efficient and effective sketch-to-metric map alignment

Sketching as a natural mode for human communication and creative processes presents opportunities for improving human–computer interaction in geospatial information systems. However, to use a sketch map as user input, it must be localized within the underlying spatial data set of the information system, the base metric map. This can be achieved by a matching process called qualitative map alignment in which qualitative spatial representations of the two input maps are used to establish correspondences between each sketched object and one or more objects in the metric map. The challenge is that, to the best of our knowledge, no method for matching qualitative spatial representations suggested so far is applicable in realistic scenarios due to excessively long runtimes, incorrect algorithm design or the inability to use more than one spatial aspect at a time. We address these challenges with a metaheuristic algorithm which uses novel data structures to match qualitative spatial representations of a pair of maps. We present the design, data structures and performance evaluation of the algorithm using real-world sketch and metric maps as well as on synthetic data. Our algorithm is novel in two main aspects. Firstly, it employs a novel system of matrices known as local compatibility matrices, which facilitate the computation of estimates for the future size of a partial alignment and allow several types of constraints to be used at the same time. Secondly, the heuristic it computes has a higher accuracy than the state-of-the-art heuristic for this task, yet requires less computation. Our algorithm is also a general method for matching labelled graphs, a special case of which is the one involving complete graphs whose edges are labelled with spatial relations. The results of our evaluation demonstrate practical runtime performance and high solution quality.     

Thematic land-cover map assimilation and synthesis: the case of locating potential bioenergy feedstock in eastern Ontario,Canada

Insufficient spatial coverage of existing land-cover data is a common limitation to timely and effective spatial analysis. Achieving spatial completeness of land-cover data is the most challenging for large study areas which straddle ecological or administrative boundaries, and where individuals and agencies lack access to, and the means to process, raw data from which to derive spatially complete land-cover maps. In many cases, various sources of secondary data are available, so that land-cover map assimilation and synthesis can resolve this research problem. The following paper develops a reliable and repeatable framework for assimilating and synthesizing pre-classified data sets. Assimilation is achieved through data reformatting and map legend reconciliation in the context of a specific application. Individual maps are assessed for accuracy at various geographic scales and levels of thematic precision, with an emphasis on the ‘area of overlap’, in order to extract information that guides the synthesis process. The quality of the synthesized land-cover data set is evaluated using advanced accuracy assessment methods, including a measure describing the ‘magnitude of disagreement’. This method is applied to derive a seamless thematic map of the land cover of eastern Ontario from two disparate map series. The importance of assessing data quality throughout the process using multiple reference data sets is highlighted, and limitations of the method are discussed.     

An analysis of urban spatial structure using comprehensive prominence of irregular areas

The purpose of this paper is to propose a new notion on prominent areas of a city defined by two types of comprehensive prominence for identifying urban spatial structure. Not only geometric attributes and topological attributes but also thematic attributes of irregular areas (e.g. districts of a city) are used to define these indices. In the paper, first the topological prominence related to geometric attributes such as size, location, and shape of areas is constructed by spatial weight matrix. Second, for finding comprehensive prominences, the principle axis factor model is adopted, and the first factor score is defined as the comprehensive prominence 1. Then, the proportion of thematic attributes of each area occupied in across the city is used to define the comprehensive prominence 2. Finally, we use these comprehensive prominences to extract some important regions in Matsudo City of Chiba Prefecture in Japan. The areas composing those regions show a high topological prominence, have a large population, have many offices, and are located around the train station.     

1:40万《腾格里沙漠地貌图》的编制

腾格里沙漠虽经过多次小规模专题考察,始终未见有沙漠专题地图编制出版,多数只作为专著中的插图加以表现。为此,编制《腾格里沙漠地貌图》显得十分重要,不仅能反映出腾格里沙漠的全貌,还能体现沙漠发展规律、演变特点、分布特征等。依据腾格里沙漠的图幅范围、地貌类型以及印刷纸张规格的要求,将《腾格里沙漠地貌图》的比例尺定为1∶40万。选用1∶25万地形图作为地理基础底图,采用1∶10万地形图作为沙丘符号编绘过渡性的工作底图,专题内容编绘以Google Earth影像资料为主。《腾格里沙漠地貌图》的地貌类型包括风积地貌、风蚀地貌以及其他地貌,其中风积地貌是重点展示的内容。根据腾格里沙漠地貌类型,在编图过程中共设计了16种形态结构类型符号,采用分层设色表示沙丘相对高度,用箭头符号表示沙丘移动方向。     

A region-based,graph-theoretic data model for the inference of second-order thematic information from remotely-sensed images

A graph-theoretic data model, XRAG (eXtended Relational Attributed Graph), is described. The model and its associated data structure can be used to represent the structural properties (morphological and symbolic) of, and relations (spatial, topological, non-topological, quantitative and symbolic) between, discrete regions identified in a digital remotely-sensed image. The objective in developing this model is to allow second-order thematic information about the scene to be inferred from an analysis of these properties and relations. The paper briefly outlines the application of this model and an associated set of analytical techniques to infer land use from an initial land cover map derived from a digital remotely-sensed image.     

沙漠化遥感数字图象处理试验研究

国际合作项目大沁塔拉地区沙漠化环境遥感监测研究课题, 使用了陆地卫星MSS和TM的CCT磁带资料。计算机遥感数字图象处理工作是在西德进行的。处理结果经两国科学工作者在野外实地验证, 一致认为, 效果较好, 符合沙漠化专业要素特征, 有利于沙漠化发展现状图和动态图的编制。     

Qualitative spatial reasoning: cardinal directions as an example

ABSTRACT

Abstract. Geographers use spatial reasoning extensively in large-scale spaces, i.e., spaces that cannot be seen or understood from a single point of view. Spatial reasoning differentiates several spatial relations, e.g. topological or metric relations, and is typically formalized using a Cartesian coordinate system and vector algebra. This quantitative processing of information is clearly different from the ways human draw conclusions about spatial relations. Formalized qualitative reasoning processes are shown to be a necessary part of Spatial Expert Systems and Geographical Information Systems.

Addressing a subset of the total problem, namely reasoning with cardinal directions, a completely qualitative method, without recourse to analytical procedures, is introduced and a method for its formal comparison with quantitative formula is defined. The focus is on the analysis of cardinal directions and their properties. An algebraic method is used to formalize the meaning of directions. The standard directional symbols (N, W, etc.) are supplemented with a symbol corresponding to an undetermined direction between points too close to each other which greatly increases the power of the inference rules. Two specific systems to determine and reason with cardinal directions are discussed in some detail.

From this example and some other previous work, a comprehensive set of research steps is laid out, following a mathematically based taxonomy. It includes the extension of distance and direction reasoning to extended objects and the definitions of other metric relations that characterize situations when objects are not disjointed. The conclusions compare such an approach with other concepts.     

Forthcoming events

Spatial data uncertainty models (SDUM) are necessary tools that quantify the reliability of results from geographical information system (GIS) applications. One technique used by SDUM is Monte Carlo simulation, a technique that quantifies spatial data and application uncertainty by determining the possible range of application results. A complete Monte Carlo SDUM for generalized continuous surfaces typically has three components: an error magnitude model, a spatial statistical model defining error shapes, and a heuristic that creates multiple realizations of error fields added to the generalized elevation map. This paper introduces a spatial statistical model that represents multiple statistics simultaneously and weighted against each other. This paper's case study builds a SDUM for a digital elevation model (DEM). The case study accounts for relevant shape patterns in elevation errors by reintroducing specific topological shapes, such as ridges and valleys, in appropriate localized positions. The spatial statistical model also minimizes topological artefacts, such as cells without outward drainage and inappropriate gradient distributions, which are frequent problems with random field-based SDUM. Multiple weighted spatial statistics enable two conflicting SDUM philosophies to co-exist. The two philosophies are ‘errors are only measured from higher quality data’ and ‘SDUM need to model reality’. This article uses an automatic parameter fitting random field model to initialize Monte Carlo input realizations followed by an inter-map cell-swapping heuristic to adjust the realizations to fit multiple spatial statistics. The inter-map cell-swapping heuristic allows spatial data uncertainty modelers to choose the appropriate probability model and weighted multiple spatial statistics which best represent errors caused by map generalization. This article also presents a lag-based measure to better represent gradient within a SDUM. This article covers the inter-map cell-swapping heuristic as well as both probability and spatial statistical models in detail.     

地理空间意像模式的Voronoi模型

提出用Voronoi空间模型来表达意像模式，Voronoi模型无岐义空间邻近关系，构建能封装对象间空间关系的拓扑网络，使用该模型将各种空间介词映射为不同的拓扑结构，GIS采用该模型，可按自然语言中空间介词描述的定性空间关系查询检索模糊地理信息。     

USING SPATIAL SEGREGATION MEASURES IN GIS AND STATISTICAL MODELING PACKAGES

It is generally known that many traditional measures of segregation cannot distinguish different spatial population patterns. Several spatial measures of segregation have been proposed to overcome this problem, but these spatial measures are difficult to use because they require explicit spatial information and complex computation. This paper shows that Geographic Information Systems (GIS) can provide the spatial information required by these indices and that statistical packages can offer the complex computation functions needed to calculate the indices. We use ARC/INFO as the GIS package and S-Plus as the statistical package to demonstrate how spatial segregation indices can be calculated by combining the capabilities of these two types of systems.     

Ontologies and representation spaces for sketch map interpretation

In this paper, we present a systematic approach to sketch map interpretation. The method decomposes the elements of a sketch map into a hierarchy of categories, from the material sketch map level to the non-material representational sketch map level, and then interprets the sketch map using the five formal representation spaces that we develop. These spaces (set, graph, metric and Euclidean) provide a tiered formal representation based on standard mathematical structures. We take the view that a sketch map bears information about the physical world and systematises this using extensions of existing formal ontologies. The motivation for this work is the partially automatic extraction and integration of information from sketch maps. We propose a set of ontologies and methods as a first step in the direction of a formalisation of partially automatic extraction and integration of sketch map content. We also see this work as a contribution to spatial cognition, where researchers externalise spatial knowledge using sketch mapping. The paper concludes by working through an example that demonstrates the sketch map interpretation at different levels using the underlying method.     

中国西部干旱区生态景观制图的若干问题

制图方法是认识和揭示客观现象与过程的重要途径。生态景观制图作为专题制图学的一个重要方向,通过建立分类体系,制定分类方法,编制专题图件,可以反映自然要素和人为作用的特点,揭示生态景观要素的耦合关系。生态景观制图中专题要素的表现方式,制图过程的数据采集,制图单元的划分,制图的模式选择,以及遥感、GIS与数字制图手段的应用,是十旱Ⅸ景观生态制图的关键问题。生态景观制图巾的地图信息理论、地图模式论、地图分析理论、地图要素综合理论、制冈工艺学等的发展,对于开拓资源环境制图学的新领域具有理论价值,并对生态规划与生态建设具有重要促进作用。     

The representation of geoscience information for data integration

In mineral exploration, resource assessment, or natural hazard assessment, many layers of geoscience maps such as lithology, structure, geophysics, geochemistry, hydrology, slope stability, mineral deposits, and preprocessed remotely sensed data can be used as evidence to delineate potential areas for further investigation. Today's PC-based data base management systems, statistical packages, spreadsheets, image processing systems, and geographical information systems provide almost unlimited capabilities of manipulating data. Generally such manipulations make a strategic separation of spatial and nonspatial attributes, which are conveniently linked in relational data bases. The first step in integration procedures usually consists of studying the individual charateristics of map features and interrelationships, and then representing them in numerical form (statistics) for finding the areas of high potential (or impact).Data representation is a transformation of our experience of the real world into a computational domain. As such, it must comply with models and rules to provide us with useful information. Quantitative representation of spatially distributed map patterns or phenomena plays a pivotal role in integration because it also determines the types of combination rules applied to them.Three representation methods—probability measures, Dempster-Shafer belief functions, and membership functions in fuzzy sets—and their corresponding estimation procedures are presented here with analyses of the implications and of the assumptions that are required in each approach to thematic mapping. Difficulties associated with the construction of probability measures, belief functions, and membership functions are also discussed; alternative procedures to overcome these difficulties are proposed. These proposed techniques are illustrated by using a simple, artificially constructed data set.     

青藏铁路格拉段典型沙害路段风沙地貌专题图编制

随着青藏铁路全线开通,风沙危害已成为影响铁路安全运营的主要环境问题之一。铁路沿线风沙危害路段主要集中在措那湖、沱沱河、北麓河等地。基于高分辨率卫星遥感影像QuickBird数据,通过野外实地勘察,同时参考Google Earth影像和DEM数据,绘制了3个典型沙害路段的风沙地貌专题图,地貌图比例尺为1:50000,采用二级分类系统,一级类为6个,共包含18个二级类。由于青藏铁路地处西风带中部急流区,风力强劲;铁路沿线生态环境脆弱、地表类型复杂,冻融和风蚀时空交错,地表沙物质丰富,风沙活动强烈而频繁,铁路沙害正呈现出迅速增长的态势。鉴于此,很有必要绘制青藏铁路沿线风沙灾害现状及防治措施布局的专题地图,为科学合理地制定青藏铁路沿线风沙危害综合防护体系提供依据。