Structural characteristics of the Sudbury impact structure,Canada: Impact‐induced versus orogenic deformation—A review

Abstract— Orogenic deformation, both preceding and following the impact event at Sudbury, strongly hinders a straightforward assessment of impact‐induced geological processes that generated the Sudbury impact structure. Central to understanding these processes is the state of strain of the Sudbury Igneous Complex, the solidified impact melt sheet, its underlying target rocks, overlying impact breccias and post‐impact sedimentary rocks. This review addresses (1) major structural, metamorphic and magmatic characteristics of the impact melt sheet and associated dikes, (2) attempts that have been made to constrain the primary geometry of the igneous complex, (3) modes of impact‐induced deformation as well as (4) mechanisms of pre‐ and post‐impact orogenic deformation. The latter have important consequences for estimating parameters such as magnitude of structural uplift, tilting of pre‐impact (Huronian) strata and displacement on major discontinuities which, collectively, have not yet been considered in impact models. In this regard, a mechanism for the emplacement of Offset Dikes is suggested, that accounts for the geometry of the dikes and magmatic characteristics, as well as the occurrence of sulfides in the dikes. Moreover, re‐interpretation of published paleomagnetic data suggests that orogenic folding of the solidified melt sheet commenced shortly after the impact. Uncertainties still exist as to whether the Sudbury impact structure was a peak‐ring or a multi‐ring basin and the deformation mechanisms of rock flow during transient cavity formation and crater modification.     

Empirical and theoretical comparisons of the Chicxulub and Sudbury impact structures

Abstract— Chicxulub and Sudbury are 2 of the largest impact structures on Earth. Research at the buried but well‐preserved Chicxulub crater in Mexico has identified 6 concentric structural rings. In an analysis of the preserved structural elements in the eroded and tectonically deformed Sudbury structure in Canada, we identified ring‐like structures corresponding in both radius and nature to 5 out of the 6 rings at Chicxulub. At Sudbury, the inner topographic peak ring is missing, which if it existed, has been eroded. Reconstructions of the transient cavities for each crater produce the same range of possible diameters: 80–110 km. The close correspondence of structural elements between Chicxulub and Sudbury suggests that these 2 impact structures are approximately the same size, both having a main structural basin diameter of ?150 km and outer ring diameters of ?200 km and ?260 km. This similarity in size and structure allows us to combine information from the 2 structures to assess the production of shock melt (melt produced directly upon decompression from high pressure impact) and impact melt (shock melt and melt derived from the digestion of entrained clasts and erosion of the crater wall) in large impacts. Our empirical comparisons suggest that Sudbury has ?70% more impact melt than does Chicxulub (?31,000 versus ?18,000 km³) and 85% more shock melt (27,000 km³ versus 14,500 km³). To examine possible causes for this difference, we develop an empirical method for estimating the amount of shock melt at each crater and then model the formation of shock melt in both comet and asteroid impacts. We use an analytical model that gives energy scaling of shock melt production in close agreement with more computationally intense numerical models. The results demonstrate that the differences in melt volumes can be readily explained if Chicxulub was an asteroid impact and Sudbury was a comet impact. The estimated 70% difference in melt volumes can be explained by crater size differences only if the extremes in the possible range of melt volumes and crater sizes are invoked. Preheating of the target rocks at Sudbury by the Penokean Orogeny cannot explain the excess melt at Sudbury, the majority of which resides in the suevite. The greater amount of suevite at Sudbury compared to Chicxulub may be due to the dispersal of shock melt by cometary volatiles at Sudbury.     

Observations and interpretations at Vredefort,Sudbury, and Chicxulub: Towards an empirical model of terrestrial impact basin formation

Abstract— The structural, topographic and other characteristics of the Vredefort, Sudbury, and Chicxulub impact structures are described. Assuming that the structures originally had the same morphology, the observations/interpretations for each structure are compared and extended to the other structures. This does not result in any major inconsistencies but requires that the observations be scaled spatially. In the case of Vredefort and Sudbury, this is accomplished by scaling the outer limit of particular shock metamorphic features. In the case of Chicxulub, scaling requires a reasoned assumption as to the formation mechanism of an interior peak ring. The observations/interpretations are then used to construct an integrated, empirical kinematic model for a terrestrial peak‐ring basin. The major attributes of the model include: a set of outward‐directed thrusts in the parautochthonous rocks of the outermost environs of the crater floor, some of which are pre‐existing structures that have been reactivated during transient cavity formation; inward‐directed motions along the same outermost structures and along a set of structures, at intermediate radial distances, during transient cavity collapse; structural uplift in the center followed by a final set of radially outward‐directed thrusts at the outer edges of the structural uplift, during uplift collapse. The rock displacements on the intermediate, inward and innermost, outward sets of structures are consistent with the assumption that a peak ring will result from the convergence of the collapse of the transient cavity rim area and the collapse of the structural uplift.     

The Peerless structure,Daniels County,northeastern Montana: A probable late Ordovician impact structure

Abstract— The Peerless structure is an ?6 km‐diameter sub‐surface anomaly located in Daniels County, northeastern Montana. The disruption of sedimentary rock in the structure lies between 2624 to 2818 m below the topographic surface. Seismic mapping shows a typical complex crater composed of a central uplift ?2 km across, which shows structural uplift of up to 90 m, an annular ring ?4 km across, and an outer rim ?6 km in diameter. The youngest disrupted rock unit is the upper Ordovician Red River formation, which indicates that the structure was formed about 430–450 Ma ago.     

Implications for cratering mechanics from a study of the Footwall Breccia of the Sudbury impact structure,Canada

Abstract— The Footwall Breccia layer in the North Range of the Sudbury impact structure is up to 150 m thick. It has been analyzed for several aspects: shock metamorphism of clasts, matrix texture, mineralogy, and geochemistry with respect to major and trace element compositions. The matrix of this heterolithic breccia contains mineral and lithic fragments, which have suffered shock pressures exceeding 10 GPa, along with clasts of breccia dikes originating from the crater basement. The matrix in a zone near the upper contact of the breccia layer is dominated by a dioritic composition with intersertal textures, whereas beneath this zone the matrix is characterized by poikilitic to granular textures and a tonalitic to granitic composition. Major and trace element analyses of adjacent slices of a thin-slab profile from the breccia show that the matrix is chemically inhomogeneous within a range of 3 mm. The breccia layer has been thermally annealed by the overlying Sudbury Igneous Complex, which is interpreted as a coherent impact melt sheet. The Rb-Sr isochron age of 1.825 ± 0.021 Ga for the matrix is a cooling age after partial melting of fine grained clastic material by the melt system. Two-pyroxene thermometry calculations give temperatures in excess of 1000 °C for this thermal overprinting. Clasts were affected by recrystallization, melting, and reactions with the surrounding matrix at that time. The crystallization of the molten matrix resulted in the observed variety of igneous textures. Results of clast population statistics for the Footwall Breccia along with both geochemical considerations and the Sr-Nd isotopic signature of the matrix indicate that the breccia constituents exclusively derived from the Levack gneiss complex, which forms the local country rock to the breccia layer in the Levack area. K-feldspar-rich domains, which tend to replace parts of matrix and felsic gneiss fragments have been formed due to metasomatic activities during the Penokean orogeny, ～ 1.7 Ga ago. The available observations suggest that the Sudbury structure represents the remnant of a multi-ring basin with an apparent diameter between 180 and 200 km and a diameter of the transient cavity of about 100 km. For a crater of the size of the Sudbury basin a maximum depth of excavation of ～21 km and a depth of shock-melted target rocks of ～27 km are obtained. In the Sudbury crater, the Footwall Breccia layer represents a part of the uplifted crater floor directly underlying the thick coherent impact melt sheet.     

Floor-fractured crater models of the Sudbury Structure,Canada: Implications for initial crater size and crater modification

Abstract The pattern of radial and concentric offset dikes at Sudbury strongly resembles fracture patterns in certain volcanically modified craters on the Moon. Since the Sudbury dikes apparently formed shortly after the impact event, this resemblance suggests that early endogenic modification at Sudbury was comparable to deformation in lunar floor-fractured craters. Although regional deformation has obscured many details of the Sudbury Structure, such a comparison of Sudbury with lunar floor-fractured craters provides two alternative models for the original size and surface structures of the Sudbury basin. First, the Sudbury date pattern can be correlated with fractures in the central peak crater Haldane (36 km in diameter). This comparison indicates an initial Sudbury diameter of between 100 and 140 km but requires loss of a central peak complex for which there is little evidence. Alternatively, comparison of the Sudbury dikes with fractures in the two-ring basin Schrödinger indicates an initial Sudbury diameter of at least ～ 180 km, which is in agreement with other recent estimates for the size of the Sudbury Structure. In addition to constraining the size and structure of the original Sudbury crater, these comparisons also suggest that crater modification may reflect different deformation mechanisms at different sizes. Most lunar floor-fractured craters are attributed to deformation over a shallow, crater-centered intrusion; however, there is no evidence for such an intrusion at Sudbury. Instead, melts from the evolving impact melt sheet probably entered fractures formed by isostatically-induced flexure of the crater floor. Since most of the lunar floor-fractured craters are too small (<100-km diameter) to induce significant isostatic adjustment, crater modification by isostatic uplift apparently is limited to only the largest of craters, whereas deformation over igneous intrusions dominates the modification of smaller craters.     

Origin and emplacement of Offset Dykes in the Sudbury impact structure: Constraints from Hess

Abstract— The Hess Offset is a steeply dipping dyke located 12–15 km north of the 1.85 Ga Sudbury igneous complex (SIC) within the 200–250 km diameter Sudbury impact structure. It is up to 60 m wide and strikes subconcentrically to the SIC for at least 23 km. The main phase of the dyke is granodioritic, but it conforms with what is locally referred to as Quartz Diorite: a term used for all the Offset Dykes of the Sudbury impact structure. Rare earth element data shows that the Hess Offset is genetically related to the SIC. Hess is most closely affiliated with an evolved Felsic Norite component of SIC and not bulk impact melt. This indicates that Hess was emplaced during fractionation of the impact melt sheet, rather than immediately following impact. The main Quartz Diorite phase of the dyke comprises a quartz + plagioclase + hornblende + biotite ± clinopyroxene ± orthopyroxene assemblage. Critically, the Hess Offset occupies a concentric fault system that marks the northern limit of a pseudotachylyte-rich, shatter cone-bearing annulus about the SIC. This fault system was active during the modification stage of the impact process.     

A plausible cause of the late heavy bombardment

Abstract— We show that at the end of the main accretional period of the terrestrial planets, a few percent of the initial planetesimal population in the 1–2 AU zone is left on highly‐inclined orbits in the inner solar system. The final depletion of this leftover population would cause an extended bombardment of all of the terrestrial planets, slowly decaying with a timescale on the order of 60 Ma. Because of the large impact velocities dictated by the high inclinations, these projectiles would produce craters much larger than those formed by asteroids of equal size on typical current near‐Earth asteroid orbits: on the Moon, basins could have been formed by bodies as small as 20 km in diameter, and 10 km craters could be produced by 400 m impactors. To account for the observed lunar crater record, the initial population of highly‐inclined leftovers would need to be a few times that presently in the main asteroid belt, at all sizes, in agreement with the simulations of the primordial sculpting of both these populations. If a terminal lunar cataclysm (a spike in the crater record ～3.9 Ga ago) really occurred on the Moon, it was not caused by the highly‐inclined leftover population, because of the monotonic decay of the latter.     

The Dhala structure,Bundelkhand craton,Central India—Eroded remnant of a large Paleoproterozoic impact structure

Abstract— The newly discovered Dhala structure, Madhya Pradesh State, India, is the eroded remnant of an impact structure with an estimated present‐day apparent diameter of about 11 km. It is located in the northwestern part of the Archean Bundelkhand craton. The pre‐impact country rocks are predominantly granitoids of ?2.5 Ga age, with minor 2.0–2.15 Ga mafic intrusive rocks, and they are overlain by post‐impact sediments of the presumably >1.7 Ga Vindhyan Supergroup. Thus, the age for this impact event is currently bracketed by these two sequences. The Dhala structure is asymmetrically disposed with respect to a central elevated area (CEA) of Vindhyan sediments. The CEA is surrounded by two prominent morphological rings comprising pre‐Vindhyan arenaceous‐argillaceous and partially rudaceous metasediments and monomict granitoid breccia, respectively. There are also scattered outcrops of impact melt breccia exposed towards the inner edge of the monomict breccia zone, occurring over a nearly 6 km long trend and with a maximum outcrop width of ?170 m. Many lithic and mineral clasts within the melt breccia exhibit diagnostic shock metamorphic features, including multiple sets of planar deformation features (PDFs) in quartz and feldspar, ballen‐textured quartz, occurrences of coesite, and feldspar with checkerboard texture. In addition, various thermal alteration textures have been found in clasts of initially superheated impact melt. The impact melt breccia also contains numerous fragments composed of partially devitrified impact melt that is mixed with unshocked as well as shock deformed quartz and feldspar clasts. The chemical compositions of the impact melt rock and the regionally occurring granitoids are similar. The Ir contents of various impact melt breccia samples are close to the detection limit (1–1.5 ppb) and do not provide evidence for the presence of a meteoritic component in the melt breccia. The presence of diagnostic shock features in mineral and lithic clasts in impact melt breccia confirm Dhala as an impact structure. At 11 km, Dhala is the largest impact structure currently known in the region between the Mediterranean and southeast Asia.     

Impact tectonics in the core of the Vredefort dome,South Africa: Implications for central uplift formation in very large impact structures

Abstract— The 80 km wide Vredefort dome presents a unique opportunity to investigate the deep levels of the central uplift of a very large impact structure. Exposure of progressively older strata in the collar of the dome and of progressively higher‐grade metamorphic rocks toward its center is consistent with differential uplift; however, the deepest levels exposed correspond to pre‐impact midcrust, rather than lower crust, as has been suggested previously. Pre‐impact Archean gneissic fabrics in the core of the dome are differentially rotated, with the angle of rotation increasing sharply at a distance of ?16–19 km from the center. The present asymmetric dips of the collar strata, with layering dipping outward at moderate angles in the southeastern sector but being overturned and dipping inward in the northwestern sector, and the eccentric distribution of the pre‐impact metamorphic isograds around the core of the dome can be reconciled with symmetric rotation of an initially obliquely NW‐dipping target sequence during central uplift formation. The rocks in the core of the dome lack distinctive megablocks or large‐slip‐magnitude faults such as have been described in other central uplifts. We suggest that the large‐scale coherent response of these rocks to the central uplift formation could have been accommodated by small‐scale shear and/or rotation along pervasive pseudotachylitic breccia vein‐fractures.     

Numerical modeling of impact heating and cooling of the Vredefort impact structure

Abstract— Large meteorite impacts, such as the one that created the Vredefort structure in South Africa?2 Ga ago, result in significant heating of the target. The temperatures achieved in these events have important implications for post‐impact metamorphism as well as for the development of hydrothermal systems. To investigate the post‐impact thermal evolution and the size of the Vredefort structure, we have analyzed impact‐induced shock heating in numerical simulations of terrestrial impacts by projectiles of a range of sizes thought to be appropriate for creating the Vredefort structure. When compared with the extent of estimated thermal shock metamorphism observed at different locations around Vredefort, our model results support our earlier estimates that the original crater was 120–160 km in diameter, based on comparison of predicted to observed locations of shock features. The simulations demonstrate that only limited shock heating of the target occurs outside the final crater and that the cooling time was at least 0.3 Myr but no more than 30 Myr.     

Charlevoix and Sudbury as gravity‐readjusted impact structures

Abstract— On the basis of detailed field investigations and the study of impact breccias at the Charlevoix impact structure (Québec), a structural analysis is given. This analysis shows that the annular arrangement of both topography and lithology can be applied to subdivide the two craters discussed in this review. Successive rings characterize the central uplift and its collapsed ring graben in the Charlevoix structure. Fault breccias show an annular distribution and indicate diverse directions of movement suggesting progressive readjustment. They formed cohesionless products inside fault planes, named mylolisthenite, and are believed to have acted as lubricants during the modification stage of the formation of the structure: listric readjustment by gravity after the formation of the transient crater. The Sudbury Structure (Ontario) shows fault breccias in a concentric arrangement similar to that of Charlevoix. It may be compared with the Charlevoix structure by applying the same mechanical readjustment model with deep listric faults. The only difference is the amount of the rise structural uplift, that is, the height of central uplift, which is less important in the larger impact structure.     

Characterization and significance of shocked quartz from the Woodleigh mpact structure,Western Australia

Abstract— We re‐examined the buried Woodleigh structure in Western Australia, which has been inferred to be a multi‐ringed, 120 km diameter impact crater, because the proposed size and possible synchronicity with one of the pre‐Mesozoic mass extinction events has attracted controversy. We undertook a detailed study of the petrology and mineralogy of a number of samples of core from the Woodleigh‐1 borehole that was drilled into the central uplift of the structure. Crystalline Proterozoic basement rocks comprising granites and gneisses in the Woodleigh‐1 core contain minor brecciation in discrete veins and reveal clear evidence of shock metamorphism over the full extent of the core. Imaging of laboratory‐etched quartz showed that a large number of grains contain shock deformation lamellae. Microstructural and crystallographic analysis of these lamellae by TEM showed that they are planar deformation features (PDFs) that have subsequently undergone annealing and water assisted recrystallization. The available geological, petrographic, and mineralogical evidence suggest that Woodleigh is an eroded impact crater that is nearer to 60 km than 120 km in diameter. Future drilling projects should better constrain the level of erosion, and may reveal any preserved impact lithologies.     

The structural inventory of a small complex impact crater: Jebel Waqf as Suwwan,Jordan

The investigation of terrestrial impact structures is crucial to gain an in‐depth understanding of impact cratering processes in the solar system. Here, we use the impact structure Jebel Waqf as Suwwan, Jordan, as a representative for crater formation into a layered sedimentary target with contrasting rheology. The complex crater is moderately eroded (300–420 m) with an apparent diameter of 6.1 km and an original rim fault diameter of 7 km. Based on extensive field work, IKONOS imagery, and geophysical surveying we present a novel geological map of the entire crater structure that provides the basis for structural analysis. Parametric scaling indicates that the structural uplift (250–350 m) and the depth of the ring syncline (<200 m) are anomalously low. The very shallow relief of the crater along with a NE vergence of the asymmetric central uplift and the enhanced deformations in the up‐range and down‐range sectors of the annular moat and crater rim suggest that the impact was most likely a very oblique one (~20°). One of the major consequences of the presence of the rheologically anisotropic target was that extensive strata buckling occurred during impact cratering both on the decameter as well as on the hundred‐meter scale. The crater rim is defined by a circumferential normal fault dipping mostly toward the crater. Footwall strata beneath the rim fault are bent‐up in the down‐range sector but appear unaffected in the up‐range sector. The hanging wall displays various synthetic and antithetic rotations in the down‐range sector but always shows antithetic block rotation in the up‐range sector. At greater depth reverse faulting or folding is indicated at the rim indicating that the rim fault was already formed during the excavation stage.     

Constraints on central uplift structure from the Manicouagan impact crater

Abstract— Recent drilling operations at the 90 km diameter, late Triassic Manicouagan impact crater of Quebec, Canada, have provided new insight into the internal structure of a complex crater's central region. Previous work had indicated that the impact event generated a ?55 km diameter sheet of molten rock of relatively consistent (originally ?400 m) thickness (Floran et al. 1978). The drilling data reveals melt sheet thicknesses of up to ?1500 m, with kilometer‐scale lateral and substantial vertical variations in the geometry of the crater floor beneath the melt sheet. The thickest melt section occurs in a 1500 m deep central trough encircled by a horseshoe‐shaped uplift of Precambrian basement. The uplift constitutes a modified central peak structure, at least part of which breached the melt sheet. Mineralogical and compositional segregation (differentiation) of the thicker melt sheet section, coupled with a lack of fractionation in the thinner units, shows that the footwall geometry and associated trough structure were in place prior to melt sheet solidification. Marked lateral changes in sub‐melt sheet (basement) relief support the existence of a castellated footwall that was created by high‐angle, impact‐related offsets of 100s to 1000s of meters. This indicates that deformation during the modification stage of the cratering process was primarily facilitated by large‐displacement fault systems. This work suggests that Manicouagan is a central peak basin with rings, which does not appear to fit with current complex crater classification schemes.     

The effect of the oceans on the terrestrial crater size‐frequency distribution: Insight from numerical modeling

Abstract— On Earth, oceanic impacts are twice as likely to occur as continental impacts, yet the effect of the oceans has not been previously considered when estimating the terrestrial crater size‐frequency distribution. Despite recent progress in understanding the qualitative and quantitative effect of a water layer on the impact process through novel laboratory experiments, detailed numerical modeling, and interpretation of geological and geophysical data, no definitive relationship between impactor properties, water depth, and final crater diameter exists. In this paper, we determine the relationship between final (and transient) crater diameter and the ratio of water depth to impactor diameter using the results of numerical impact models. This relationship applies for normal incidence impacts of stoney asteroids into water‐covered, crystalline oceanic crust at a velocity of 15 km s^?1. We use these relationships to construct the first estimates of terrestrial crater size‐frequency distributions (over the last 100 million years) that take into account the depth‐area distribution of oceans on Earth. We find that the oceans reduce the number of craters smaller than 1 km in diameter by about two‐thirds, the number of craters ?30 km in diameter by about one‐third, and that for craters larger than ?100 km in diameter, the oceans have little effect. Above a diameter of ?12 km, more craters occur on the ocean floor than on land; below this diameter more craters form on land than in the oceans. We also estimate that there have been in the region of 150 impact events in the last 100 million years that formed an impact‐related resurge feature, or disturbance on the seafloor, instead of a crater.     

The Corossol structure: A possible impact crater on the seafloor of the northwestern Gulf of St. Lawrence,Eastern Canada

We report on a 4.1 (±0.2) km diameter and 185 m deep circular submarine structure exposed on the seabed in >40 m water depths in the northwestern Gulf of St. Lawrence (Eastern Canada) from the analysis of high‐resolution multibeam bathymetric and seismic data. The presence of a circular form characterized by a central uplift and concentric rings resembles the morphology and geometry of complex meteorite impact structures. Also, other origins, such as kimberlites, intrusions, karsts, or diapirs, can be eliminated on geological criteria. A single 4 cm long breccia fragment recovered from the central uplift has numerous glassy droplets of fluorapatite composition, assumed to be impact melts, and a single quartz grain with planar intersection features thought to be shock‐induced planar deformation features (PDFs). The absolute age of this possible impact structure is unknown, but its geological setting indicates that it was formed long after the Mid‐Ordovician and before regional pre‐Quaternary sea‐level lowstands. Present results outline the need for further examination to confirm an impact origin and to precisely date the formation of the structure.     

Petrography,geochemistry, and argon‐40/argon‐39 ages of impact‐melt rocks and breccias from the Ames impact structure,Oklahoma: The Nicor Chestnut 18‐4 drill core

Abstract— The 15 km diameter Ames structure in northwestern Oklahoma is located 2.75 km below surface in Cambro‐Ordovician Arbuckle dolomite, which is overlain by Middle Ordovician Oil Creek Formation shale. The feature is marked by two concentric ring structures, with the inner ring of about 5 km diameter probably representing the collapsed remnant of a structural uplift composed of brecciated Precambrian granite and Arbuckle dolomite. Wells from both the crater rim and the central uplift are oil‐ and gas‐producing, making Ames one of the economically important impact structures. Petrographic, geochemical, and age data were obtained on samples from the Nicor Chestnut 18‐4 drill core, off the northwest flank of the central uplift. These samples represent the largest and best examples of impact‐melt breccia obtained so far from the Ames structure. They contain carbonate rocks, which are derived from the target sequence. The chemical composition of the impact‐melt breccias is similar to that of target granite, with variable carbonate admixture. Some impact‐melt rocks are enriched in siderophile elements indicating the possible presence of a meteoritic component. Based on stratigraphic arguments, the age of the crater was estimated at 470 Ma. Previous ⁴⁰Ar‐³⁹Ar dating attempts of impact‐melt breccias from the Dorothy 1–19 core yielded plateau ages of about 285 Ma, which is in conflict with the stratigraphic age. The new ⁴⁰Ar‐³⁹Ar age data obtained on the melt breccias from the Nicor Chestnut core by ultraviolet (UV) laser spot analysis resulted in a range of ages with maxima around 300 Ma. These data could reflect processes related either the regional Nemaha Uplift or resetting due to hot brines active on a midcontinent‐wide scale, perhaps related to the Alleghenian and Ouachita orogenies. The age data indicate an extended burial phase associated with thermal overprint during Late Pennsylvanian‐Permian.     

The South Range Breccia Belt of the Sudbury Impact Structure: A possible terrace collapse feature

Abstract— The South Range Breccia Belt (SRBB) is an arcuate, 45 km long zone of Sudbury Breccia in the South Range of the 1.85 Ga Sudbury Impact Structure. The belt varies in thickness between tens of meters to hundreds of meters and is composed of a polymict assemblage of Huronian Supergroup (2.49–2.20 Ga), Nipissing Diabase (2.2 Ga), and Proterozoic granitoid breccia fragments ranging in size from a few millimeters to tens of meters. The SRBB matrix is composed of a fine‐grained (～100 μm) assemblage of biotite, quartz, and ilmenite, with trace amounts of plagioclase, zircon, titanite, epidote, pyrite, chalcopyrite, pyrrhotite, and occasionally chlorite. The SRBB hosts the Frood‐Stobie, Vermilion, and Kirkwood quartz diorite offset dykes, the former being associated with one of the largest Ni‐Cu‐PGE sulphide deposits in the world. Optical petrography and whole‐rock geochemistry concur with previous studies that have suggested that the matrix of the SRBB is derived from comminution and at least partial frictional melting of the wall rock Huronian Supergroup lithologies. Rare earth element (REE) data from all sampled lithologies associated with the SRBB exhibit crustal signatures when normalized to C1 chondrite values. Additionally, REE data from the quartz diorites, disseminated sulphides in Sudbury Breccia, and a sample of an aphanitic biotite‐hornblende tonalite dyke exhibit flat slopes when compared to the mafic and felsic norites, quartz gabbro, and granophyre units of the Sudbury Igneous Complex (SIC), which suggests that these lithologies are representative of bulk SIC melt. We suggest that the SRBB was formed by high strain‐rate (>1 m/s), gravity‐driven seismogenic slip of the inner ring of the Sudbury Impact Structure during postimpact crustal readjustment (crater modification stage). Failure of the hanging wall may have facilitated the injection of bulk SIC melt into the SRBB, along with the Ni‐Cu‐PGE sulphides of the Frood‐Stobie deposit. Postimpact Penokean (1.9–1.7 Ga) tectonism, particularly northwest‐directed shearing along the South Range Shear Zone and associated thrust faulting, could account for the present subvertical orientation of the SRBB, and the apparent lack of a connection at depth with the SIC.     

Structural evolution of the 40 km wide Araguainha impact structure,central Brazil

Abstract— The 40 km wide Araguainha structure in central Brazil is a shallowly eroded impact crater that presents unique insights into the final stages of complex crater formation. The dominant structural features preserved at Araguainha relate directly to the centripetal movement of the target rocks during the collapse of the transient cavity. Slumping of the transient cavity walls resulted in inward‐verging inclined folds and a km‐scale anticline in the outer ring of the structure. The folding stage was followed by radial and concentric faulting, with downward displacement of kilometer‐scale blocks around the crater rim. The central uplift records evidence for km‐scale upward movement of crystalline basement rocks from the transient cavity floor, and lateral moment of sedimentary target rocks detached from the cavity walls. Much of the structural grain in the central uplift relates to structural stacking of km‐scale thrust sheets of sedimentary strata onto the core of crystalline basement rocks. Outward‐plunging radial folds indicate tangential oblate shortening of the strata during the imbrication of the thrust sheets. Each individual sheet records an early stage of folding and thickening due to non‐coaxial strains, shortly before sheet imbrication. We attribute this folding and thickening phase to the kilometer‐scale inward movement of the target strata from the transient cavity walls to the central uplift. The outer parts of the central uplift record additional outward movement of the target rocks, possibly related to the collapse of the central uplift. An inner ring structure at 10–12 km from the crater center marks the extent of the deformation related to the outward movement of the target rocks.