Impact lithologies and their emplacement in the Chicxulub impact crater: Initial results from the Chicxulub Scientific Drilling Project,Yaxcopoil, Mexico

Abstract— The Chicxulub Scientific Drilling Project (CSDP), Mexico, produced a continuous core of material from depths of 404 to 1511 m in the Yaxcopoil‐1 (Yax‐1) borehole, revealing (top to bottom) Tertiary marine sediments, polymict breccias, an impact melt unit, and one or more blocks of Cretaceous target sediments that are crosscut with impact‐generated dikes, in a region that lies between the peak ring and final crater rim. The impact melt and breccias in the Yax‐1 borehole are 100 m thick, which is approximately 1/5 the thickness of breccias and melts exposed in the Yucatán‐6 exploration hole, which is also thought to be located between the peak ring and final rim of the Chicxulub crater. The sequence and composition of impact melts and breccias are grossly similar to those in the Yucatán‐6 hole. Compared to breccias in other impact craters, the Chicxulub breccias are incredibly rich in silicate melt fragments (up to 84% versus 30 to 50%, for example, in the Ries). The melt in the Yax‐1 hole was produced largely from the silicate basement lithologies that lie beneath a 3 km‐ thick carbonate platform in the target area. Small amounts of immiscible molten carbonate were ejected with the silicate melt, and clastic carbonate often forms the matrix of the polymict breccias. The melt unit appears to have been deposited while molten but brecciated after solidification. The melt fragments in the polymict breccias appear to have solidified in flight, before deposition, and fractured during transport and deposition.     

LAMOST Project and Its Scientific Goals

1　ＩｎｔｒｏｄｕｃｔｉｏｎＡｓａｒｅｓｕｌｔｏｆｍａｎｙｙｅａｒｓ’ｅｆｆｏｒｔｓ,Ｃｈｉｎｅｓｅａｓｔｒｏｎｏｍｉｃａｌｃｏｍｍｕｎｉｔｙｈａｓｌａｉｄｄｏｗｎａｓｏｌｉｄａｓ ｔｒｏｎｏｍｉｃａｌｏｂｓｅｒｖａｔｉｏｎａｌｆｏｕｎｄａｔｉｏｎ ,ｗｈｉｃｈｉｓｆｉｇｕｒｅｄｂｙｔｈｅ 2 .1 6ｍａｎｄ 1 .5 6ｍｏｐｔｉｃａｌｔｅｌｅｓｃｏｐｅｓ,ｔｈｅ 1 .2ｍｉｎｆｒａｒｅｄｔｅｌｅｓｃｏｐｅ ,ｔｈｅｓｏｌａｒｍａｇｎｅｔｉｃｆｉｅｌｄａｎｄｍｕｌｔｉ ｃｈａｎｎｅｌｔｅｌｅｓｃｏｐｅ ,ｔｈｅ 1 3.7ｍ…     

绕月探测工程卫星数据的存储与管理

从数据的类型和产品格式说明开始,对绕月探测工程中的科学探测数据的管理方法进行了研究.通过数据存储架构和软件结构的分析,指出数据存储的软硬件环境;通过数据存储和备份策略的分析,指出数据存储的可靠性.这些存储与管理方法将为更好地管理数据并向外界提供检索和获取服务提供保障.     

Paleomagnetic and rock magnetic study of the Yaxcopoil‐1 impact breccia sequence,Chicxulub impact crater (Mexico)

Abstract— Results of a detailed paleomagnetic and rock magnetic study of samples of the impact breccia sequence cored in the Yaxcopoil‐1 (Yax‐1) borehole between about 800 m and 896 m are presented. The Yax‐1 breccia sequence occurs from 794.63 m to 894.94 m and consists of redeposited melt‐rich, clast‐size sorted, fine‐grained suevites; melt‐rich, no clast‐size sorting, medium‐grained suevites; coarse suevitic melt agglomerates; coarse melt‐rich heterogeneous suevites; brecciated suevites; and coarse carbonate and silicate melt suevites. The low‐field susceptibility ranges from ?0.3 to 4018 times 10^?6 SI, and the NRM intensity ranges from 0.02 mA/m up to 37510 mA/m. In general, the NRM intensity and magnetic susceptibility present wide ranges and are positively correlated, pointing to varying magnetic mineral contents and textures of the melt‐rich breccia sequence. The vectorial composition and magnetic stability of NRM were investigated by both stepwise alternating field and thermal demagnetization. In most cases, characteristic single component magnetizations are observed. Both upward and downward inclinations are present through the sequence, and we interpret the reverse magnetization as the primary component in the breccias. Both the clasts and matrix forming the breccia appear to have been subjected to a wide range of temperature/pressure conditions and show distinct rock magnetic properties. An extended interval of remanence acquisition and secondary partial or total remagnetization may explain the paleomagnetic results.     

The suevite of drill hole Yucatàn 6 in the Chicxulub impact crater

Abstract— The suevite breccia of the Chicxulub impact crater, Yucatàn, Mexico, is more variable and complex in terms of composition and stratigraphy than suevites observed at other craters. Detailed studies (microscope, electron microprobe, SEM, XRF) have been carried out on a noncontinuous set of samples from the drill hole Yucatàn 6 (Y6) located 50 km SW from the center of the impact structure. Three subunits can be distinguished in the suevite: the upper unit is a fine‐grained carbonate‐rich suevite breccia with few shocked basement clasts, mostly altered melt fragments, and formerly melted carbonate material; the middle suevite is a coarse‐grained suevite with shocked basement clasts and altered silicate melt fragments; the lower suevite unit is composed of shocked basement and melt fragments and large evaporite clasts. The matrix of the suevite is not clastic but recrystallized and composed mainly of feldspar and pyroxene. The composition of the upper members of the suevite is dominated by the sedimentary cover of the Yucatàn target rock. With depth in well Y6, the amount of carbonate decreases and the proportion of evaporite and silicate basement rocks increases significantly. Even at the thin section scale, melt phases of different chemistry can be identified, showing that no widespread homogenization of the melt took place. The melt compositions also reflect the heterogeneity of the deep Yucatàn basement. Calcite with characteristic feathery texture indicates the existence of formerly pure carbonate melt. The proportion of carbonate to evaporite clasts is less than 5:1, except in the lower suevite where large evaporite clasts are present. This proportion constrains the amount of CO₂ and SO_X released by the impact event.     

Canadian Arctic Meteorite Project (CAMP): 1990

Abstract— The Devon Ice Cap, Northwest Territories, has been targeted for searches for extra-terrestrial material in the Canadian Arctic. Of three expeditions (1981, 1986, 1990), only the last met with weather conditions favourable for meteorite reconnaissance. Surveys were carried out on the ice cap margin, along boulder trains brought to the surface along ice layers, supra-glacial stream and lake sediments, and the ubiquitous cryoconite that covers the ice surface. In addition, outwash streams and plains were covered, in the hope of discerning meteoritic material lying on the Lower Palaeozoic bedrock. No meteorites were recovered, though a number of pseudotaks were identified as potential searching grounds for future expeditions. Samples of cryoconite, supra-glacial lake sediments and outwash silts were collected, and some of these have been given a preliminary examination. SEM analysis indicates that this material represents a new source for micro-meteoritic material, analogous to the deposits found in Greenland.     

第二个天体测量卫星(Gaia)项目的进展

简述了第二个天体测量卫星Gaia(将于2013年3月发射)项目的科学意义,并给出了该项目的组织工作和最近的进展.描述了Gala观测资料处理的基本原理,以及与依巴谷观测资料处理的不同点.介绍了Gaia参考架构建的考虑,以及为了构建微角秒量级的参考架,应在自行中加入系统差改正,如长期光行差、引力波效应、宇宙膨胀各向异性的影响,弱的微引力透镜和微引力透镜噪声效应等.介绍了Gaia光学参考架与射电参考架ICRFL2之间建立联系过程中,选择河外射电源的准则,其中包括源的核漂移和光学长期变化监测等.最后,提出了我国现有设备参与支持Gaia的地基观测,以及正在研制的65 m射电天线在射电天体测量方面可以开展的若干课题.     

An emplacement mechanism for the mega‐block zone within the Chicxulub crater, (Yucatán,Mexico) based on chemostratigraphy

Abstract– To better constrain the emplacement mechanism of the so‐called “mega‐block zone,” a structurally complex unit of target rocks within the Chicxulub impact structure, the stratigraphic coherence of this zone is tested using its strontium isotopic composition. Forty‐eight samples across the 616 m sequence of deformed Cretaceous rocks in the lower part of the Yaxcopoil‐1 core, drilled by ICDP in 2002, were analyzed for their ⁸⁷Sr/⁸⁶Sr isotope ratio. The oceanic anoxic event 2 (OAE2 event), located near the base of the core forms the only stratigraphic anchor point. From this point upward to approximately 1050 m depth, the ⁸⁷Sr/⁸⁶Sr trend shows small oscillations, between approximately 0.7074 and 0.7073, characteristic of Cenomanian to Santonian values. This is followed by an increase to approximately 0.7075, similar to the one reported in the seawater strontium curve during the Campanian. Scattered Sr isotope ratios are attributed to local diagenetic effects, such as those expected from the possible presence of hot, impact‐induced dikes and hydrothermal fluid flow, originating from the thick central melt sheet. The absence of Upper Maastrichtian Sr isotope values may result from the removal of upper target lithologies during the impact cratering process. Based on these results, the displaced Cretaceous sequence in Yax‐1 appears to have preserved its stratigraphic coherence. During the modification stage, it probably moved as a whole into the annular basin during collapse of the crater wall, thereby breaking up into discrete units along previously weakened detachment zones. This model is consistent with the emplacement mechanism postulated by Kenkmann et al. (2004) .     

The advanced Moon micro-imager experiment (AMIE) on SMART-1: Scientific goals and expected results

The advanced Moon micro-imager experiment (AMIE) is the imaging system on board ESA mission to the Moon SMART-1; it makes use of a miniaturised detector and micro-processor electronics developed by SPACE X in the frame of the ESA technical programme. The AMIE micro-imager will provide high resolution CCD images of selected lunar areas and it will perform colour imaging through three filters at 750, 915 and 960 nm with a maximum resolution of 46 m/pixel at the perilune of 500 km. Specific scientific objectives will include (1) imaging of high latitude regions in the southern hemisphere, in particular the South Pole Aitken basin (SPA) and the permanently shadowed regions close to the South Pole, (2) determination of the photometric properties of the lunar surface from observations at different phase angles (physical properties of the regolith), (3) multi-band imaging for constraining the chemical and mineral composition of the surface, (4) detection and characterisation of lunar non-mare volcanic units, (5) study of lithological variations from impact craters and implications for crustal heterogeneity. The AMIE micro-imager will also support a Laser-link experiment to Earth, an On Board Autonomous Navigation investigation and a Lunar libration experiment coordinated with radio science measurements.     

The origin of carbonates in impact melt-bearing breccias from Site M0077 at the Chicxulub impact structure,Mexico

Carbonates from the impact melt-bearing breccia in the 2016 IODP/ICDP Expedition 364 drill core at Site M0077 were systematically documented and characterized petrographically and geochemically. Calcite, the only carbonate mineral present, is abundant throughout this deposit as five distinct varieties: (1) subangular carbonate clasts (Type A); (2) subround/irregular carbonate clasts with clay altered rims (Type B); (3) fine-crystalline matrix calcite (Type C); (4) void-filling sparry calcite (Type D); and (5) microcrystalline carbonate with flow textures (Type E). Quantitative geochemical analysis shows that calcite in all carbonate varieties are low in elemental impurities (<2.0 cumulative wt% on average); however, relative concentrations of MgO and MnO vary, which provides distinction between each variety: MgO is highest in calcite from Types A, B, and C carbonates (0.2–0.8 wt% on average); MnO is highest in calcite from Types B, C, and D carbonates (0.2–1.3 wt% on average); and calcite from Type E carbonate is most pure (<0.1 wt% on average MgO and MnO, cumulatively). Based on textural and geochemical variations between carbonate types, we interpret that some of the carbonate target rocks melted during impact and were immiscible within the silicate-dominated melt sheet prior to the resurgence of seawater. Type B clasts were formed by molten fuel–coolant interaction, as the incoming seawater eroded through the melt sheet and encountered carbonate melt (Type E). Post-impact meteoric-dominated hydrothermal activity produced the Mn-elevated calcite from Type C and D carbonates, and altered the Type B clasts to be elevated in Mn and host a clay-rich rim.     

Mobile element analysis by secondary ion mass spectrometry (SIMS) of impactite matrix samples from the Yaxcopoil‐1 drill core in the Chicxulub impact structure

Abstract— The concentrations of the fluid mobile trace elements lithium, beryllium, boron, and barium were measured in samples of the altered matrix of several impactite breccias of the Yaxcopoil‐1 drill core using secondary ion mass spectrometry (SIMS) to determine the extent of transport due to aqueous or hydrothermal processes. Three of the elements, Li, Be, and B, have higher concentrations in the upper suevite impact breccias than in the lower impact melt deposits by factors of 3.5, 2.2, and 1.5, respectively. Lithium and B are the most enriched elements up section, and appear to have had the greatest mobility. The similar fractionation of Li and B is consistent with fluid transport and alteration under low‐temperature conditions of less than 150 °C based on published experimental studies. In contrast to Li, Be, and B, the concentration of Ba in the altered matrix materials decreases upward in the section, and the concentration of Ba in the matrix is an order of magnitude less than the bulk concentrations, likely due to the presence of barite. The origin of the elemental variations with depth may be related to different protolith compositions in the upper versus the lower impactite units. A different protolith in the altered matrix is suggested by the Mg‐rich composition of the lower units versus the Al‐rich composition of the upper units, which largely correlates with the mobile element variations. The possibility that vertical transport of mobile elements is due to a postimpact hydrothermal system is supported by published data showing that the sediments immediately overlying the impactites are enriched in mobile elements derived from a hydrothermal system. However, the mobile elements in the sediments do not have to originate from the underlying impactites. In conclusion, our data suggests that the impactites at this location did not experience extensive high‐temperature hydrothermal processing, and that only limited transport of some elements, including Li, Be, and B, occurred.     

South Galactic Cap u-band Sky Survey(SCUSS): Project Overview

The South Galactic Cap u-band Sky Survey(SCUSS) was established in 2009 in order to provide a photometric input catalog for target selection of the Large Sky Area Multi-Object Fiber Spectroscopic Telescope(LAMOST) project. SCUSS is an international cooperative project between National Astronomical Observatories, Chinese Academy of Sciences, and Steward Observatory at the University of Arizona, using the 90 inch(2.3 m) Bok telescope on Kitt Peak. The telescope is equipped with a prime focus camera that is composed of a mosaic of four 4096 × 4096 CCDs and has a field of view of about 1 deg2. From 2009 to 2013, SCUSS performed a sky survey of an approximately 5000 deg2 field of the South Galactic Cap in u band, including the Galactic anticenter area and the SDSS-IV extended imaging area. The limiting magnitude of SCUSS is deeper than 23 mag(at a signal-to-noise ratio of 5). In this paper, we briefly describe the goals of this project, method of observations and data reduction, and we also introduce current and potential scientific activities related to the SCUSS project.     

Ultraviolet Astronomy: Astrophysical Perspectives of the Spektr-UF Project (WSO-UV)

Astrophysics - The prospects for astronomical observations in the ultraviolet (UV) are discussed in a brief review and the areas in which UV astronomy is especially in demand are listed. Some...     

The Castles Project

We describe the goals of the CASTLES (CfA-Arizona-Space-Telescope-LEns-Survey) project including a sample of NICMOS images of gravitational lenses and a brief list of the preliminary findings. This revised version was published online in July 2006 with corrections to the Cover Date.     

Ocean Drilling Project Hole 689B spherules and upper Eocene microtektite and clinopyroxene-bearing spherule strewn fields

Abstract— Montanari et al. (1993) reported a positive Ir anomaly in the upper Eocene sediments from Ocean Drilling Program Hole 689B on the Maud Rise, Southern Ocean. Vonhof (1998) described microtektites and clinopyroxene-bearing (cpx) spherules associated with the Ir anomaly in Hole 689B and suggested that they belong to the North American and equatorial Pacific cpx strewn fields, respectively. We searched a suite of 27 samples taken through the spherule layer from Hole 689B, and we recovered 386 microtektites and 667 cpx spherules. We studied the petrography of the microtektites and cpx spherules and determined the major element compositions of 31 microtektites and 14 cpx spherules using energy dispersive x-ray analysis. We also determined the minor element compositions of eight microtektites using instrumental neutron activation analysis. We found that the peak abundance of cpx spherules is ～2 cm below the peak abundance of the microtektites (～128.7 m below sea floor), which suggests that the cpx spherule layer may be slightly older (～3–5 ka). The microtektites are mostly spherical and are generally transparent and colorless. They are similar to the North American microtektites in composition, the biggest differences being their generally lower Na₂O and generally higher Zr, Ba, and Ir (up to 0.3 ppb) contents. We agree with Vonhof (1998) that the Hole 689B microtektites probably belong to the North American tektite strewn field. We calculate that the number of microtektites (>125 μm)/cm² at Hole 689B is 52. This number is close to the concentration predicted by extrapolation of the trend of concentration vs. distance from the Chesapeake Bay structure, based on data from other North American microtektite-bearing sites. Thus, the North American strewn field may be at least four times larger than previously mapped. The Hole 689B cpx spherules range from translucent yellow to opaque black, but most are opaque tan to dark brown. They are generally spherical in shape and all are < 125 μm in diameter. Some contain Ni-rich spinels in addition to clinopyroxene microlites. The cpx spherules are petrographically and compositionally similar to cpx spherules previously found in the northwestern Atlantic Ocean, Caribbean Sea, Gulf of Mexico, equatorial Pacific, and eastern Indian Ocean. The abundance and widespread geographic occurrence of these spherules suggest that the strewn field may be global in geographic extent. Assuming a global extent, we estimate that there may be at least 25 billion metric tons of cpx spherules in the strewn field. Based on age, size, and geographic location, we speculate that the 100 km diameter Popigai crater in northern Siberia may be the source of the cpx spherule layer.     

The Impact of Information Technology and Networks: New Perspectives for Scientific, Technical and Medical (STM) Publishing

This contribution can only be a small collection of ideas and experiences from my (personal) publishing point of view. The subject area assigned is very generic and there are indeed many developments going on, so I had to be very selective and restrictive, while avoiding redundancies as much as I could. I have included some metaphors and paradigms, such as the shift from print publications to electronic information. The traditional role of publishers in the information chain is compared with the new opportunities that electronic publishing is offering now and may offer in the foreseeable future. From DTP to DTD, unplugged and unbundled information, linearity, appropriateness, packaging and customizing, filters, intelligent agents, quality, integrity and authenticity are some of the items hidden in the text. The overall conclusion is: the Internet still can learn a lot from print...! This revised version was published online in August 2006 with corrections to the Cover Date.     

Late Eocene microkrystites and microtektites at Maud Rise (Ocean Drilling Project Hole 689B; Southern Ocean) suggest a global extension of the approximately 35.5 Ma Pacific impact ejecta strewn field

Abstract— Late Eocene microtektites and microkrystites recovered from Ocean Drilling Project Hole 689B at Maud Rise (Southern Ocean) are stratigraphically and geochemically compared to spherules from the North American and Pacific strewn fields, and to devitrified spherules from the Eocene-Oligocene global stratotype section and point section in Massignano, Italy. The ODP 689B microkrystites compare well to the Pacific strewn field microkrystites, which suggests that the geographic extent of the Pacific strewn field was much larger than previously documented. The elemental composition of microtektites of ODP Hole 689B is comparable to tektites of the North American strewn field. Their ⁸⁷Sr/⁸⁶Sr ratio, however, is different. We tentatively interpret this to reflect geochemical heterogeneity within the North American strewn field but can not exclude the option that the chemical discrepancies result from the existence of a third late Eocene impact site.     

Scientific objectives and selection of targets for the SMART-1 Infrared Spectrometer (SIR)

The European SMART-1 mission to the Moon, primarily a testbed for innovative technologies, was launched in September 2003 and will reach the Moon in 2005. On board are several scientific instruments, including the point-spectrometer SMART-1 Infrared Spectrometer (SIR). Taking into account the capabilities of the SMART-1 mission and the SIR instrument in particular, as well as the open questions in lunar science, a selection of targets for SIR observations has been compiled. SIR can address at least five topics: (1) Surface/regolith processes; (2) Lunar volcanism; (3) Lunar crust structure; (4) Search for spectral signatures of ices at the lunar poles; and (5) Ground truth and study of geometric effects on the spectral shape. For each topic we will discuss specific observation modes, necessary to achieve our scientific goals. The majority of SIR targets will be observed in the nadir-tracking mode. More than 100 targets, which require off-nadir pointing and off-nadir tracking, are planned. It is expected that results of SIR observations will significantly increase our understanding of the Moon. Since the exact arrival date and the orbital parameters of the SMART-1 spacecraft are not known yet, a more detailed planning of the scientific observations will follow in the near future.