共查询到20条相似文献,搜索用时 93 毫秒
1.
诸广山复式花岗岩基位于湘、赣、粤三省交界处,是南岭花岗岩的重要组成部分,由南体和北体组成,出露面积大于5000 km2,形成于加里东期、印支期、燕山期3个时代。通过对诸广山北体3期花岗岩锆石SHRIMP U-Pb定年,结果表明,加里东期花岗闪长岩锆石SHRIMP U-Pb年龄为(414.5±4.5)Ma(n=13,MSWD=0.52)、(417.3±4.8)Ma(n=12,MSWD=0.84),形成于晚志留世末。印支期黑云母二长花岗岩锆石SHRIMP U-Pb年龄(207.5±2.7)Ma(n=10,MSWD=1.6),形成于晚三叠世末。燕山期二云母二长花岗岩锆石SHRIMP U-Pb年龄(148.2±1.7)Ma(n=13,MSWD=0.93),形成于晚侏罗世。该成果为南岭地区构造-岩浆演化及成矿作用研究,提供了重要的花岗岩年代学依据。 相似文献
2.
塔山花岗岩体位于湘南阳明山-塔山东西向构造-岩浆带东端,为呈近东西向延伸的岩基,出露面积约200km2。岩体侵入于古生代地层中,接触面倾向围岩,倾角30°~50°,由四侵入次岩体组成,之间多为脉动接触关系,主要岩性为黑云母二长花岗岩。第二侵入次岩体SHRIMP锆石U-Pb年龄为218±3Ma,第三侵入次岩体SHRIMP锆石U-Pb年龄为215±3Ma。由此表明,塔山花岗岩形成于晚三叠世,相邻单元之间的时间间隔为3~5Ma。阳明山-塔山东西向构造-岩浆带主要形成于印支期。区内钨、锡、铜、铅、锌等多金属矿床丰富,找矿潜力较大,亦表明南岭地区不仅存在燕山期花岗岩成矿,印支期花岗岩也可成矿。 相似文献
3.
《地质通报》2017,(Z1)
塔山花岗岩体位于湘南阳明山-塔山东西向构造-岩浆带东端,为呈近东西向延伸的岩基,出露面积约200km~2。岩体侵入于古生代地层中,接触面倾向围岩,倾角30°~50°,由四侵入次岩体组成,之间多为脉动接触关系,主要岩性为黑云母二长花岗岩。第二侵入次岩体SHRIMP锆石U-Pb年龄为218±3Ma,第三侵入次岩体SHRIMP锆石U-Pb年龄为215±3Ma。由此表明,塔山花岗岩形成于晚三叠世,相邻单元之间的时间间隔为3~5Ma。阳明山-塔山东西向构造-岩浆带主要形成于印支期。区内钨、锡、铜、铅、锌等多金属矿床丰富,找矿潜力较大,亦表明南岭地区不仅存在燕山期花岗岩成矿,印支期花岗岩也可成矿。 相似文献
4.
江西九岭花岗岩类复式岩基锆石SHRIMP U-Pb年代学 总被引:31,自引:0,他引:31
江西九岭花岗岩体产于扬子地块东南缘, 是我国华南的一个规模巨大的复式花岗岩基.该岩体一直被认为是在晋宁期、海西期和燕山期多期次岩浆侵入活动的产物.在对该复式岩基进行详细野外调查的基础上, 开展了锆石SHRIMPUPb年龄测定, 过去认为是晋宁期形成的花岗岩样品, 测出的206Pb/238U年龄为(9828±8) Ma; 而原来认为是海西期形成的甘坊岩体测出的年龄为(820±10) Ma, 说明该区不存在海西期的花岗岩, 结合其他新的年代学资料推测扬子板块内可能不存在加里东—海西期的岩体; 原认为是燕山中期的样品测出的年龄为(151.4±2.4) Ma, 研究结果与原来的一致.此外, 还获得了1.4~1.9 Ga的继承锆石的年龄, 可能代表九岭新元古代花岗岩源岩的年龄. 相似文献
5.
通过岩相学研究和LA-ICP-MS锆石U-Pb测年,对红山子岩体的主要侵入期次和侵入岩形成时代进行了厘定,明确了红山子岩体为复式岩体并探讨了其地质意义。岩相学研究表明,红山子复式岩体由粗粒碱长花岗岩、斑状黑云母花岗岩、细粒黑云母碱长花岗岩和花岗斑岩等组成; LA-ICP-MS锆石U-Pb测年结果显示:粗粒碱长花岗岩的年龄为153. 6±1. 2 Ma,斑状黑云母花岗岩年龄为151. 4±1. 1 Ma,与周边火山盆地赋矿火山岩的年龄一致,属晚侏罗世早期;细粒黑云母碱长花岗岩的年龄为131. 5±1. 8 Ma,花岗斑岩年龄为133. 3±1. 4 Ma,与侵入红山子盆地的花岗斑岩的年龄一致,属早白垩世早期。因此,红山子岩体是由燕山期2个相隔20 Ma的不同期次侵入体组成的复式岩体。研究表明,红山子铀矿床赋存在早白垩世早期花岗斑岩与晚侏罗世火山岩的内、外接触带中,暗示复式岩体早白垩世早期细粒黑云母花岗岩、花岗斑岩与晚侏罗世粗粒碱长花岗岩、斑状黑云母花岗岩的内、外接触带是有利的找矿部位,并得到了铀矿勘查实践的初步证实。 相似文献
6.
采用LA-MC-ICP-MS锆石U-Pb年龄和Hf同位素测定技术,对大宝山北部九曲岭花岗岩进行测定。结果显示来自九曲岭岩体的三个花岗岩样品的U-Pb谐和年龄分别为169.0±1.9 Ma,171.3±1.4 Ma,450.2±2.9 Ma,表明九曲岭花岗岩体为一复式岩体,主体为燕山期花岗岩,但局部有加里东期花岗岩。锆石Lu-Hf同位素组成测定显示:燕山期岩体的锆石具有低的负εHf(t)值(分别为–12.19~–8.51和–19.47~–8.63),二阶段模式年龄(tDM2)为1.45~1.63 Ga,与华南燕山期花岗岩特征一致,表明其主要是下地壳重熔的产物;加里东期岩体的锆石具有高的εHf(t)值(8.89~12.06),tDM2为0.62~0.78 Ga,表明其源区有新生地壳物质的贡献,暗示早古生代加里东期大宝山区域处于伸展环境。 相似文献
7.
8.
广西大厂笼箱盖复式岩体的LA-MC-ICP-MS锆石U-Pb年龄及其地质意义 总被引:9,自引:6,他引:3
广西大厂矿田中部的笼箱盖岩体是一个多期次侵入的复式岩体,尽管前人对其中个别阶段岩体进行过年龄精测,但迄今还没有对多期岩体进行过系统的年代学精测。本文在运用阴极发光技术对岩体中锆石进行细致的内部结构分析的基础上,利用LA-MC-ICP-MS锆石U-Pb原位定年方法,系统测定了岩体中单颗粒锆石的206Pb/238U年龄,结果显示出,笼箱盖复式岩体形成经历了103.8~102Ma、96.6~93.86Ma、90.1~85.1Ma 3期活动,其中96.6~93.86Ma为主体形成时期,其第一阶段形成中细粒含斑黑云母花岗岩(96.6±2.5Ma)、细粒含斑的黑云母花岗岩(94.3±2.2Ma),第二阶段形成中细粒等粒状黑云母花岗岩(96.1±2.0Ma),第三阶段形成似斑状黑云母花岗岩(93.86±0.84Ma)。这些岩体之间界限清晰、无明显冷凝边,说明岩浆活动是一种连续的脉动过程。大厂矿田的锌铜矿体、锡多金属矿体的形成主要与笼箱盖复式岩体的第二期岩浆活动密切相关,成矿过程在短暂时间完成。笼箱盖复式岩体的形成时期与中国东部110~80Ma大规模成矿过程是吻合的,成岩成矿作用可能与岩石圈伸展作用有关。 相似文献
9.
河北省四拨子-六拨子钼铜矿区侵入岩 LA-ICP-MS锆石U-Pb定年及成矿意义 总被引:1,自引:0,他引:1
河北省青龙满族自治县四拨子-六拨子钼铜矿位于燕辽成矿带东部,是近年来发现的中型钼铜矿床。矿化多沿层面、裂隙充填、交代,呈脉状赋存于大红峪组的石英砂岩、长石石英砂岩及白云岩夹层和高于庄组的白云岩内,地质特征表明成矿主要与硅化关系密切。文章对矿区6个侵入岩进行了锆石LA-ICP-MS U-Pb年代学研究,结果表明,矿区存在4期岩浆侵入活动:第一期为晚三叠世(211~206 Ma),形成六柱坪和三拨子西沟细粒似斑状二长花岗岩;第二期为早侏罗世早期(196~190 Ma),形成老商家和五拨子花岗斑岩;第三期为早侏罗世晚期(177Ma),形成达子沟细粒似斑状二长花岗岩;第四期为晚侏罗世早期(160 Ma),形成七拨子粗中粒二长花岗岩。矿区辉钼矿的Re-Os加权平均年龄为(194±1)Ma,成矿时代为早侏罗世,与花岗斑岩形成时代一致(196~190 Ma),表明钼铜成矿可能与花岗斑岩岩浆期后热液活动有关。 相似文献
10.
东昆仑都兰县可可沙地区加里东期石英闪长岩锆石LA-ICP-MS U-Pb年龄及其意义 总被引:20,自引:5,他引:15
野外调研和室内综合分析表明,出露于东昆仑造山带东段都兰可可沙地区的加里东期石英闪长岩体包括4种岩石类型:①灰—深灰色中粒石英闪长岩;②灰色中粒片麻状石英闪长岩;③灰色中粗粒角闪石英闪长岩;④浅肉红色中细粒似斑状二长花岗岩。用LA-ICP-MS法进行了锆石U-Pb同位素年龄测定,样品11013的锆石206Pb/238U加权平均年龄为515.2Ma±4.4Ma(MSWD=2.5),限定该石英闪长岩体的形成时代为中寒武世,表明东昆仑造山带加里东早期存在一期岩浆活动事件。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
13.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10 μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提出了具体测定要求。 相似文献
14.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
16.
17.
岩石密度和超高压岩石折返速率 总被引:4,自引:3,他引:1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
18.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引:1,自引:0,他引:1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献