西藏邦铺钼铜矿区花岗斑岩成岩年龄研究

邦铺钼铜矿床是发育于冈底斯成矿带的大型斑岩型钼铜矿床,矿区内岩浆岩发育,(二长)花岗斑岩为成矿母岩。利用斑岩中锆石离子探针U-Pb法和全岩Rb-Sr法测定邦铺含矿斑岩的年龄,以确定含矿斑岩的形成时代。花岗斑岩中锆石SHRIMP U-Pb法测定其年龄为14.2 Ma±0.2 Ma(MSWD=0.79);二长花岗斑岩中锆石SHRIMP U-Pb法测试值为13.9 Ma±0.3 Ma(MSWD=3.05);全岩Rb-Sr等时线年龄为13.88 Ma±0.38 Ma(MSWD=1.7)。因此14.2 Ma~3.9 Ma年龄值可以作为邦铺矿区含矿斑岩体的结晶年龄。     

福建紫金山矿田罗卜岭铜钼矿化斑岩锆石LA-ICP- MS U-Pb年龄及成矿岩浆高氧化特征研究

罗卜岭斑岩铜钼矿床是紫金山Cu-Au-Mo浅成低温-斑岩矿田内新近发现的大型斑岩铜钼矿床,本文在岩芯及光薄片系统观察的基础上,分析了矿化斑岩锆石LA-ICP-MS U-Pb年龄及锆石Ce4/Ce3+比值.罗卜岭赋矿斑岩体可分为两期,早期为角闪黑云母花岗闪长斑岩及黑云母花岗闪长斑岩,晚期为黑云母花岗闪长斑岩.早期角闪黑云母花岗闪长斑岩和黑云母花岗闪长斑岩锆石LA-ICP-MS U-Pb年龄分别为103.7±1.2Ma,MSWD=0.33和103.0±0.9Ma,MSWD=1.00;晚期黑云母花岗闪长斑岩锆石LA-ICP-MS U-Pb年龄为97.6±2.1Ma,MSWD=6.00.罗卜岭成矿斑岩基质普遍发育硬石膏,两期成矿斑岩锆石都具较高的Ce4 +/Ce3平均值,在630 ～770之间,高于区内非成矿花岗岩锆石的Ce4+/Ce3+平均值(182 ～577),显示罗卜岭斑岩矿床成矿岩浆具有高氧逸度的特征.据罗卜岭斑岩矿床的形成时代、高氧逸度岩浆特征,结合华南地区中生代构造背景,我们初步认为罗卜岭斑岩矿床的形成可能和中生代古太平洋向北西西方向俯冲有关.     

云南宾川宝丰寺碱性斑岩成岩时代的精确厘定与地质意义

宾川宝丰寺碱性斑岩体位于扬子陆块西缘金沙江—红河断裂与宾川—程海断裂夹持部位,属于金沙江—红河富碱斑岩带组成部分,由细晶含黑云母花岗斑岩和粗晶花岗斑岩组成。LA-ICP-MS锆石U-Pb测年结果显示,2件样品的206Pb/238U加权平均年龄分别为34.99±0.37 Ma(MSWD=2.1,n=20)和33.53±0.27 Ma(MSWD=1.4,n=19),均属古近纪始新世岩浆活动的产物。宝丰寺花岗斑岩的成岩年龄与印—亚晚碰撞转换时限(41~26 Ma)和滇西三江富碱斑岩带碱性岩浆活动高峰期(45~30 Ma)一致,表明宝丰寺斑岩成岩作用是印—亚大陆碰撞的响应,形成于晚碰撞期伸展构造背景下。此外,本次获得的宝丰碱性斑岩成岩年龄与滇西斑岩型矿床成矿高峰期年龄(34±2 Ma)吻合,暗示宝丰寺碱性斑岩具有一定的成矿潜力。     

西藏邦铺钼(铜)矿床含矿二长花岗斑岩LA-ICP-MS锆石U-Pb定年及地质意义

邦铺斑岩型钼(铜)矿床位于甲玛铜多金属矿床北东约30 km处,与钼(铜)成矿有关的岩体主要为二长花岗斑岩,次为花岗闪长斑岩及闪长(玢)岩.通过对二长花岗斑岩体进行LA-ICP-MS锆石U-Pb年龄测试,获得了含矿母岩的年龄,二长花岗斑岩的26颗锆石206Pb/238U加权平均年龄为(16.23±0.19)Ma(MSWD...     

冷水坑斑岩型银铅锌矿床含矿岩体锆石SHRIMP U-Pb年代学研究

冷水坑斑岩型银铅锌矿床是中国目前唯一的典型斑岩型银铅锌矿床,对于该矿床的成矿斑岩的形成时代至今仍没有精确的年龄数据。本文通过对冷水坑斑岩型银铅锌矿床成矿斑岩(花岗斑岩)样品中的锆石11个测试点的SHRIMP锆石U-Pb年代学研究,得出206Pb/238U加权平均年龄为(162.0±2)Ma(MSWD=1.4),因此,认为冷水坑花岗斑岩的形成年代为(162.0±2)Ma。冷水坑含矿斑岩成岩年龄与成矿年龄高度一致,成岩年龄与成矿作用开始时间差异不明显。此外,由冷水坑矿床成岩和成矿年龄数据推断出矿化持续时间约27Ma。     

都龙锡锌矿床锡石和锆石U-Pb年代学：滇东南白垩纪大规模花岗岩成岩-成矿事件

都龙锡锌矿床是我国最大的锡石硫化物矿床之一。由于缺少可靠的年代学数据,对该矿床的成因尚存在较大争议。本文报道了利用锡石和锆石U-Pb法,首次获得的都龙锡锌矿床及相关的燕山晚期老君山花岗岩的年龄。其中,锡石TIMS法~(206)Pb/~(238)U年龄加权平均值为79.8±3.2Ma(MSWD=3.16),(238)U/~(204)Pb-~(206)Pb/~(204)Pb等时线年龄为82.0±9.6Ma (MSWD=4.81);隐伏花岗岩的锆石SHRIMP法~(206)Pb/~(238)U年龄加权平均值为92.9±1.9Ma(N=10,MSWD=0.71),花岗斑岩的锆石SHRIMP法~(206)Pb/~(238)U年龄加权平均值为86.9±1.4Ma(N=9,MSWD=3.70),表明锡(铜)矿化主要与晚白垩世岩浆热液活动有关。结合个旧、白牛厂两个超大型矿床和相关花岗岩体的年代学资料,指示滇东南地区于白垩纪存在以锡矿化为特色的大规模花岗岩成岩-成矿事件,可能与晚中生代以来华南地块岩石圈伸展有关。     

西藏曲水县达布斑岩铜(钼)矿床成岩成矿年代学研究

本文采用锆石LA-ICP-MS微区U-Pb测年技术,对冈底斯成矿带东段曲水县达布斑岩Cu(Mo)矿床北部达布矿区含矿斑岩体、南部显角囊含矿花岗闪长斑岩岩体进行了年代学研究,通过对3件岩体样品中单颗粒锆石的分析,达布主矿体花岗闪长斑岩样品206Pb/238U年龄加权平均值为16.5±0.05Ma(n=15,MSWD=3),达布主含矿体二长花岗斑岩样品年龄为16.1±0.13Ma(n=15,MSWD=1.03),南部显角囊矿体花岗闪长斑岩年龄为16.2±0.04Ma(n=13,MSWD=0.0064)。对达布矿床斑岩Cu(Mo)矿床主矿体中4件辉钼矿样品,显角囊矿体中6件辉钼矿样品,分别进行了Re-Os同位素测试,等时线年龄分别为14.6±0.50Ma(MSWD=0.35,主矿体)、14.8±0.23Ma(MSWD=1.3,显角囊)。结合前人研究以及本次测年结果认为:1)达布斑岩铜(钼)矿床岩体侵位的年龄应限定在16Ma左右,成矿时代为14Ma左右,成矿时间差小于0.86Ma,与区域上"成矿瞬时发生"的成矿规律是一致的;2)矿床产出于印度-亚洲大陆板块后碰撞伸展环境。     

南岭诸广山北体复式花岗岩锆石SHRIMP U-Pb年龄及多期岩浆活动

诸广山复式花岗岩基位于湘、赣、粤三省交界处,是南岭花岗岩的重要组成部分,由南体和北体组成,出露面积大于5000 km2,形成于加里东期、印支期、燕山期3个时代。通过对诸广山北体3期花岗岩锆石SHRIMP U-Pb定年,结果表明,加里东期花岗闪长岩锆石SHRIMP U-Pb年龄为(414.5±4.5)Ma(n=13,MSWD=0.52)、(417.3±4.8)Ma(n=12,MSWD=0.84),形成于晚志留世末。印支期黑云母二长花岗岩锆石SHRIMP U-Pb年龄(207.5±2.7)Ma(n=10,MSWD=1.6),形成于晚三叠世末。燕山期二云母二长花岗岩锆石SHRIMP U-Pb年龄(148.2±1.7)Ma(n=13,MSWD=0.93),形成于晚侏罗世。该成果为南岭地区构造-岩浆演化及成矿作用研究,提供了重要的花岗岩年代学依据。     

南岭东段赣南地区天门山花岗岩体及花岗斑岩脉的SHRIMP定年及其意义

赣南地区岩浆岩分布广泛,其中燕山期岩浆活动最为强烈,与W、Sn、Nb、Ta成矿的关系尤为密切。选择天门山岩体及附近的花岗斑岩脉为研究对象,应用SHRIMP锆石微区U-Pb测年技术,对天门山岩体的主体、补体和花岗斑岩脉进行了精确测年:天门山岩体的主体——中细粒斑状黑云母花岗岩锆石的9个点SHRIMP谐和年龄为152±2Ma(MSWD=1.09);补体——细粒斑状黑云母花岗岩锆石的5个点SHRIMP谐和年龄为152±2.6Ma(MSWD=0.16);花岗斑岩(墙)脉锆石10个点的SHRIMP谐和年龄为150.8±1.8Ma(MSWD=1.6)。结合区域资料,研究表明:①天门山岩体的主体形成于中侏罗世,补体是主体进一步分异演化的产物;②在赣南西部的崇余犹矿集区内成岩与成矿的年龄基本上是协调一致的,成矿集中期为150~155Ma;③岩浆活动由中深成相花岗岩侵入体演化到浅成相花岗斑岩脉仅相差1~5Ma,表明存在成矿集中期。     

湘南界牌岭锡多金属矿床含矿花岗斑岩SHRIMP锆石U-Pb年代学研究

界牌岭锡多金属矿床是湘南地区一个与花岗斑岩关系十分密切的大型矿床。本文通过对含矿花岗斑岩样品中的锆石进行SHPIMP U-Pb年代学研究,获得206Pb/238U加权平均年龄为92.0±1.6 Ma(MSWD=1.05),显示为晚白垩世侵位。含矿花岗斑岩成岩年龄与矿床锡矿成矿年龄基本一致,它们应属于同一构造-岩浆活动的产物。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.