Channelled erosion through a marine dump site of dredge spoils at the mouth of the Puyallup River, Washington State, USA

Channels are relatively common on river-mouth deltas, but the process by which they arise from river sediment discharge is unclear because they can potentially be explained either by negatively buoyant (hyperpycnal) flows produced directly from the river outflow or by flows generated by repeated failure and mobilisation of sediment rapidly deposited at the delta front. Channels eroded through a dump site of dredge spoils are described here from multibeam and older sonar data collected in Commencement Bay, at the mouth of the Puyallup River. Shallow channels on the seaward upper surface of the dump site, away from any flows that could have been produced by delta front failures, suggest that at least some hyperpycnal flows were produced directly from the positively buoyant river outflow up to 200 m from the edge of the river mouth platform. The form of channel bed erosion is revealed by the longitudinal shape of the main eroded channel compared with the adjacent dump site profile. It suggests that the channel evolved by its steep front retreating, rather than by simple vertical entrenchment or diffusive-like evolution of the profile, a geometry interpreted as evidence that repeated failure of the bed occurred in response to shear stress imposed by bottom-travelling flows. Model calculations based on shear strengths back-calculated from the geometry of channel wall failures suggest that, if the main channel were eroded solely by hyperpycnal flows, their generation was remarkably efficient in order to create flows vigorous enough to cause channel bed failure. Besides the sediment concentration and discharge characteristics that have been considered to dictate the ability of rivers to produce hyperpycnal flows, it is suggested that the timing of floods with respect to the tidal cycle should also be important because extreme low tides may be needed to ensure that coarse sediment is transferred vigorously to the edge of river mouth platforms.     

Sediment transport on subaqueous fan delta slopes, Britannia Beach, British Columbia

A high-resolution acoustic survey over a fjord side fan delta revealed distinctive bottom features resulting from slope instability processes. Delta-front chutes occurring on slopes of l3° are partially filled with radiating splays of coarse-grained sediment, apparently transported downslope by coarse-grained debris flows that originated on the subaerial slopes above the fan. Arcuate scarp patterns represent shallow successive, rotational slides, with numcrous small displacements of individual blocks and slabs of sediment. Blocky, ridged depositional areas occur at the base of the fan delta, but there is no evidence of long-distance mass movement farther downfjord.     

Sediment transport on subaqueous fan delta slopes,Britannia Beach,British Columbia

A high-resolution acoustic survey over a fjord side fan delta revealed distinctive bottom features resulting from slope instability processes. Delta-front chutes occurring on slopes of l3° are partially filled with radiating splays of coarse-grained sediment, apparently transported downslope by coarse-grained debris flows that originated on the subaerial slopes above the fan. Arcuate scarp patterns represent shallow successive, rotational slides, with numcrous small displacements of individual blocks and slabs of sediment. Blocky, ridged depositional areas occur at the base of the fan delta, but there is no evidence of long-distance mass movement farther downfjord.     

Numerical modeling of hyperpycnal flows in an idealized river mouth

Numerical experiments in an idealized river mouth are conducted using a three-dimensional hydrodynamics model (EFDC model) to examine the impacts of suspended sediment concentration (SSC), settling velocity of sediment and tidal mixing on the formation and maintenance of estuarine hyperpycnal flows. The standard experiment presents an illustrative view of hyperpycnal flows that carry high-concentrated sediment and low-salinity water in the bottom layer (>1.0 m in thickness) along the subaqueous slope. The structure and intra-tidal variation of the simulated hyperpycnal flows are quite similar to those previously observed off the Huanghe (Yellow River) mouth. Results from the three control experiments show that SSC of river effluents is the most important parameter to the formation of hyperpycnal flows. High SSC will increase the bulk density of river effluents and thus offset the density difference between freshwater and seawater. Low SSC of river effluents will produce a surface river plume, as commonly observed in most large estuaries. Both the settling velocity of sediment particles and the tidal mixing play an important role in maintaining the hyperpycnal flows. Increasing settling velocity enhances the deposition of sediment from the hyperpycnal layer and thus accelerates the attenuation of hyperpycnal flows, whereas increasing tidal mixing destroys the stratification of water column and therefore makes the hyperpycnal flows less evident. Our results from numerical experiments are of importance to understand the initiation and maintenance of hyperpycnal flows in estuaries and provide a reference to the rapidly decaying hyperpycnal flows off the Huanghe river mouth due to climatic and anthropogenic forcing over the past several decades.     

黄河清8出汊河口泥沙异重流特征及其时空分布

选用1996年9月5—6日黄河口新口门水文泥沙同步观测资料,采用距离倒数加权插值法(IDW)生成河口泥沙异重流的含沙海水密度、流速和含沙量随时间变化的等值线图。基于此,分析了黄河口泥沙异重流发育形成的时空变化特征,并结合遥感影像和水下地形图进一步探讨了泥沙异重流对河口沉积的影响。研究结果表明,黄河口(新口门)泥沙异重流发育频繁,且其形成时的含沙海水密度与老河口相似;泥沙异重流的空间分布与水下三角洲泥沙堆积体及河口沙嘴的形态存在明显相关,泥沙异重流的存在直接影响河口前缘泥沙的沉积,但对侧缘的影响不大;泥沙异重流形成初期,在低高潮涨潮阶段中的一次较小的涨落潮周期内其形成和消亡过程与潮流的涨落潮周期呈正向对应关系,且在这一时段的涨憩时泥沙异重流的泥沙含量达到最大;流速垂向分布为泥沙异重流形成初期流速小于上层海水流速,且层次分明,随其进一步向深海运动流速呈增大再减小的趋势,至三角洲前缘陡坡段其底层流速大干中上层海水流速。     

Deltaic,mixed and turbidite sedimentation of ancient foreland basins

The marine fill of ancient foreland basins is primarily recorded by depositional systems consisting of facies and facies associations deposited by a variety of sediment gravity flows in shallow-marine, slope and basinal settings. Tectonism and climate were apparently the main factors controlling the sediment supply, accommodation and depositional style of these systems. In marginal deltaic systems, sedimentation is dominated by flood-generated hyperpycnal flows that build up impressive accumulations of graded sandstone beds in front of relatively small high-gradient fan-deltas and river deltas. During periods of tectonically forced lowstands of sealevel, these systems may commonly shift basinward to shelfal and slope regions. Instability along the edges of these lowstand deltas and sand-laden hyperpycnal flows generate immature and coarse-grained turbidite systems commonly confined within structural depressions and generally encased in distal delta-front and prodeltaic deposits. Because of the close vertical and lateral stratigraphic relations between deltaic and turbidite-like facies, these marginal systems are herein termed ‘mixed depositional systems’. They are very common in the fill of foreland basins and represent the natural link between deltaic and basinal turbidite sedimentation.Basinal turbidite systems form in deeper water elongate highly subsiding troughs (foredeeps) that developed in front of advancing thrust systems. The impressive volumes of sheet-sandstones that form the fill of these troughs suggest that basinal turbidite systems are likely to form following periods of dramatic tectonic uplift of adjacent orogenic wedges and related high-amplitude tectonically-forced sealevel lowstands. In such deep basinal settings, sediment flux to the sea is dramatically increased by newly formed sediment in fluvial drainage basins and the subaerial and submarine erosion of falling-sealevel deltaic deposits generated during the uplift. Turbidity currents are very likely to be mainly triggered by floods, via hyperpycnal flows and related sediment failures, but can fully develop only in large-scale erosional conduits after a phase of catastrophic acceleration and ensuing bulking produced by bed erosion. This process leads to deepening and widening of the conduits and the formation of large-volume highly efficient bipartite currents whose energy dissipation is substantially reduced by the narrow and elongate basin geometry. These currents can thus carry their sediment load over considerable distances down the basin axis.     

The subaqueous delta of the modern Huanghe (Yellow River)

The subaqueous delta of the Huanghe (Yellow River) has been studied using high-resolution acoustic systems. There are many subtle variations in sea floor morphology and sediment geometries; smooth, featureless areas are rare. The main components of the subaqueous delta include broad, shallow channels; moderately disturbed areas with near-surface cut and fill structures; heavily disturbed areas with sea floor depressions, pits, and gullies; and a smooth, gently sloping distal delta apron or rise. These features are not directly related to sediment settling from dilute surface plumes but are due to gravity-driven hyperpycnal underflows, submarine mass movements, and silt flows.     

Sediment distribution and evolution of sedimentary processes in a small sandy turbidite system (Golo system, Mediterranean Sea): implications for various geometries based on core framework

The Golo Margin in eastern Corsica is dissected by four canyons and two gullies which fed turbidite systems. Study of the dispersal of surficial sediments and flow dynamic in the Golo system is based on Kullenberg and interface cores interpreted in relation to a previously published seismic dataset. Cores were described in detail and interpreted within a sedimentary and stratigraphic framework. During the last 42,000 years, gravity processes which occurred in the large systems with a canyon source were mainly slide-induced, differentiated turbulent surges and hyperpycnal flows. Processes occurring in the small system with a gully source are mainly hyperconcentrated and concentrated flows. Deposits from the Corsican Margin can intercalate with products of processes triggered on the Pianosa Ridge located in the eastern part of the basin. During relative sea-level lowstands or during periods of rapid or high-amplitude sea-level fall, only large canyons (South and North Golo) are supplied by carbonate-rich hyperconcentrated and concentrated flows which are channelled in incised valleys on the shelf. During periods of slow or low-amplitude sea-level fall and during sea-level rise, sediments are trapped on a shelf delta and intensely winnowed by shelf hydrodynamic processes. Sand-rich hyperconcentrated and concentrated flows occur. All the systems fed by a canyon are active simultaneously. Gullies form and are active only during periods of sea-level rise. During relative highstands of sea level (Holocene), all the system is draped by hemipelagic sediments. Relative sea-level changes and canyon location relative to river mouths have a strong influence on the nature of sediment input, and the initiation and type of gravity flows which, in turn, control morphology and geometry.     

A model of the effects of sedimentation rate on the stability of Mississippi Delta sediments

High sedimentation rates on the subaqueous delta of the Mississippi River create localized sediment instabilities that result in downslope movement through well-defined chutes or gullies. A simplified kinematic wave equation model that neglects second-order effects such as diffusion treats the failure mechanism as a sedimentation and slope oversteepening process and sediment motion as a propagating kinematic wave. The model allows estimation of sedimentation rates necessary to initiate slope failures for a range of observed depths of basal shear planes. Model results indicate that slope oversteepening is a viable failure mechanism and a thin surface sediment layer may be moving downslope in a slow, continuous motion.     

Transport processes deduced from geochemistry and the void ratio of surface core samples, deep sea Sagami Bay, central Japan

Sagami Bay is a deep-water foreland basin with an average sedimentary rate of approximately 0.1 g/cm²/year. It is an appropriate area to study for better understanding of sedimentary processes in a setting with a high sedimentation rate. Seven multiple core samples, 30-50 cm thick, were obtained from Sagami Bay. Four of the core samples were taken from the Tokyo submarine fan system (Tokyo canyon floor, Tokyo fan valley and its levee, the distal fan margin). Two samples were obtained from the Sakawa fan delta and the adjacent topographic high. The remaining one was from an escarpment of the Sagami submarine fault. Variations in chemical composition can be recognized at every coring site. They show two different sediment sources: the sediments of the Tokyo submarine fan system and those from Sakawa fan delta. Further, there are differences in chemical composition between canyon floor and levees even within the Tokyo submarine fan system. The results suggest that the sedimentary process is strongly controlled not by vertical particle settling but by a hyperpycnal flow process. The proxies obtained from the core samples do not reflect conditions in the water column immediately overlying the sea floor. Rather, they are controlled by conditions on the adjacent continental shelf or/and shallow basins, which are the areas of primary accumulation.     

The Var turbidite system (Ligurian Sea, northwestern Mediterranean)—morphology, sediment supply, construction of turbidite levee and sediment waves: implications for hydrocarbon reservoirs

The Var turbidite system is a small sandy system located in the Ligurian Basin. It was deposited during the Pliocene-Quaternary in a flat-floored basin formed during the Messinian salinity crisis. The system was fed through time by the Var and Paillon canyons that connect directly to the Var and Paillon rivers. It is still active during the present sea-level highstand. Two main mechanisms are responsible for gravity-flow triggering in the Var turbidite system: (1) mass-wasting events affect mainly the upper part of the continental slope, in areas where volumes of fresh sediment delivered by rivers are highest, and result from the under-consolidation state of slope sediments and earthquakes, and (2) high-magnitude river floods resulting from melting of snow and convective rainfall during fall and spring seasons, and generating hyperpycnal turbidity currents at river mouths when the density of freshwater transporting suspended particles exceeds that of ambient seawater. Failure- and flood-induced gravity flows are involved through time in the construction of the Var Sedimentary Ridge, the prominent right-hand levee of the Var system, and sediment waves. Processes of construction of both the Var Ridge and sediment waves are closely connected. Sandy deposits are thick and abundant in the eastern (downchannel) part of the ridge. Their distribution is highly constrained by the strong difference of depositional processes across the sediment waves, potentially resulting through time in the individualization of large and interconnected sand bodies.     

Erosional channel incision and the origin of large sediment waves in Trondheimsfjorden,central Norway

An erosional channel and upslope-climbing sediment waves have been observed in Ytre Orkdalsfjorden and the marine fjord branch Gaulosen off the mouth of Gaula River in Trondheimsfjorden, central Norway. The submarine channel (up to 100–150 m wide and 12 m deep) is interpreted as the pathway of hyperpycnal flows and turbidity currents. It can be traced for 20 km on the seafloor from the mouth of Gaula River down to 500 m of water depth. Based on swath bathymetry and seismic data, the sediment waves are shown to have an accumulated thickness of 50–60 m. They are up to 8 m high, have up to 1-km-long crests, and wavelengths of 100–900 m. The sediment waves are attributed to hyperpycnal flows and turbidity currents overflowing the banks of the channel. Many of the sediment waves were instigated by pre-existing topography created by mass movements since early Holocene times.     

Hyperpycnal plumes and plume fronts over the Huanghe (Yellow River) delta front

The Huanghe (Yellow River) discharges extremely high suspended sediment concentrations (25 to 220 g/l) which favor sustained hyperpycnal plumes (underflows). Observations of weakly hyperpycnal unchannelized plumes and indirect evidence of strongly hyperpycnal channelized underflows over the delta front indicate the importance of these modes of sediment dispersal. The weakly hyperpycnal plumes occupy the entire water column over the shallow (<5 m) delta top. From a pronounced front near the break in slope at about 5 m depth, they descend over the delta-front slope as wide-spread underflows. Evidence of strongly hyperpycnal underflows was shown from subaqueous valleys partly filled with low-density mud.     

Lithofacies and origin of the Late Triassic muddy gravity-flow deposits in the Ordos Basin,central China

Fine-grained sediments from the Late Triassic Yanchang Fm. in the Ordos Basin (central China) were studied by core analysis and geophysical logging. Part of the mudstones in this formation are stratified, part of them are unstratified; the various mudstones can be subdivided into eight types on the basis of their structures and textures. They represent a variety of environments, ranging from delta fronts and subaqueous fans to deep-water environments. Part of the sediments were reworked and became eventually deposited from subaqueous gravity flows, such as mud flows, turbidity currents and hyperpycnal flows that easily developed on the clay-rich deltaic slopes. The sediments deposited by such gravity flows show abundant soft-sediment deformation structures. Understanding of such structures and recognition of fine-grained sediments as gravity-flow deposits is significant for the exploration of potential hydrocarbon occurrences. Because fine-grained deposits become increasingly important for hydrocarbon exploration, and because the sediments in the lacustrine Yanchang Formation were deposited by exactly the same processes that play a role in the accumulation of deltaic and prodeltaic fine-grained sediments, the sedimentological analysis provided here is not only important for the understanding of deep lacustrine sediments like the Yanchang Formation, but also for a better insight into the accumulation of fine-grained prodeltaic deep-marine sediments and their potential as hydrocarbon source rocks and reservoir rocks.     

Imaging the recent sediment dynamics of the Galicia Bank region (Atlantic,NW Iberian Peninsula)

Multibeam bathymetry, high resolution multi-channel, and very high resolution single-channel (3.5 kHz) seismic records were used to depict the complex geomorphology that defines the Galicia Bank region (Atlantic, NW Iberian Peninsula). This region (≈620–5,000 m water depth) is characterized by a great variety of features: structural features (scarps, highs, valleys, fold bulges), fluid dynamics-related features (structural undulations and collapse craters), mass-movement features (gullies, channels, mass-flow deposits, slope-lobe complexes, and mass-transport deposits), bottom-current features (moats, furrows, abraded surface, sediment waves, and drifts), (hemi)pelagic features, mixed features (abraded surfaces associated to mixed sediments) and bioconstructions. These features represent architectural elements of four sedimentary systems: slope apron, contouritic, current-controlled (hemi)pelagic, and (hemi)pelagic. These systems are a reflection of different sedimentary processes: downslope (mass transport, mass flows, turbidity flows), alongslope (bottom currents of Mediterranean Outflow Water, Labrador Sea Water, North Atlantic Deep Water, and Lower Deep Water), vertical settling, and the interplay between them. The architectural and sediment dynamic complexities, for their part, are conditioned by the morphostructural complexity of the region, whose structures (exposed scarps and highs) favor multiple submarine sediment sources, affect the type and evolution of the mass-movement processes, and interact with different water masses. This region and similar sedimentary environments far from the continental sediment sources, as seamounts, are ideal zones for carrying out submarine source-to-sink studies, and can represent areas subject to hazards, both geologic and oceanographic in origin.     

Effects of topography on lofting gravity flows: Implications for the deposition of deep-water massive sands

Hyperpycnal flows are generated in the marine environment by sediment-laden fresh water discharge into the ocean. They frequently form at river mouths and are also generated in proximal ice-melting settings and are thought to be responsible for transporting a large proportion of suspended river sediment onto and off the continental shelf. Hyperpycnal flows are an example of gravity currents that display reversing buoyancy. This phenomenon is generated by the fresh water interstitial fluid being less dense than that of the ambient seawater. Thus after sufficient particles are sedimented the flow can become positively buoyant and loft, forming a rising plume. Here we present results from physical scale-modelling experiments of lofting gravity currents upon interaction with topography. Topography, in the form of a vertical obstacle, triggered a localised lofting zone on its upstream side. This lofting zone was maintained in a fixed position until the bulk density of the flow had reduced enough to allow lofting along its entire length. The obstructed lofting zone is associated with a sharp increase in deposit thickness. By inference these experimentally established lofting dynamics are applied to improve understanding of the potential for hyperpycnal flows to deposit deep-water massive sands. This study provides a depositional mechanism by which large volumes of sand can be deposited in the absence of traction and the fines removed, leaving thick deposits of structureless sand with a low percentage of mud. This conceptual model for the first time provides a framework by which the geometries of certain deep-water massive sands may be predicted within specific depositional and basinal settings. This is crucial to our understanding of massive sand deposits in modern and ancient turbiditic systems and in the commercial evaluation of hydrocarbon potential of such sedimentary successions.     

Sediment blocks on the sea floor in British Columbia fjords

In the deepest parts of Bute and Knight Inlets, British Columbia, unusual blocky mounds of sediment rise abruptly from the otherwise smooth sea floor. The mounds (up to 28 m high, 80 m wide, and 150 m long) display bioturbated surfaces with transverse fractures and elongate depressions. The origin of the mounds and sediment blocks, which contrast with the otherwise flat-lying fjord-bottom strata, remains unknown. Two mechanisms for their formation are considered: (1) subsidence associated with earthquake-induced liquefaction; and (2) uplift driven by the growth of localized gas hydrates in the near-surface sediments.     

Seismic characteristics, morphology and formation of the ponded Fangliao Fan off southwestern Taiwan, northern South China Sea

Using bathymetry and reflection seismic profiles this study reveals the nature of the modern ponded Fangliao Fan within a framework of sediment infilling of an intra-slope basin on a tectonically active margin off southwestern Taiwan. The Fangliao Fan begins at the mouth of Fangliao Canyon at a water depth of 900 m and terminates down-slope at the escarpment of a linear ridge north of the Kaoping Slope Valley at a water depth of about 1,100 m, sediment gravity flows being prevented from farther down-slope transport due to ponding against this bathymetric high. The fan appears as a distinct basinward-opening triangular depocenter confined by ridges on both sides and the NW–SE trending ridge aligned normal to the elongation of the fan. These topographic ridges were formed by mud-diapiric intrusions. The external form of the ponded Fangliao Fan is characterized by a fan-valley fill pattern that has a concave cross-sectional morphology, in contrast to typical mounded fans deposited on slope-basin plains having a smooth topography. Sediment episodically funneled through the Fangliao Canyon from upslope areas and derived from the flanks of the mud-diapiric ridges are mainly transported by mass movement before being re-dispersed by unconfined channels to infill the intra-slope basin, thereby building up channelized fan complexes with poorly developed levees. The sediment flows from the mouth of Fangliao Canyon flow down-slope along the west flank of the Fangliao Ridge. In the process, a feeder channel has been eroded into the seafloor along which sediment is transported to the distal parts of the fan. Sediment west of the feeder channel is mainly redistributed by mass movement and/or fan channels to fill up the irregular topographic low in the slope. Due to a very low sediment supply, Fangliao Fan represents a starved ponded slope fan. As such it provides insights into the processes by which ponded fans develop and can therefore serve as an analog for similar fans developed on topographically complex slopes elsewhere. The morpho-structural features of the Fangliao Fan resulted from the interplay between sediment supply, uplift of the mud-diapiric ridge, mass movements, and alternating incision and deposition.     

Geomorphology of the western Ionian Sea between Sicily and Calabria,Italy

In the westernmost Ionian Sea lies a steep, tectonically active marine basin influenced by turbidity currents generated by terrigenous river input from the adjacent mountains and strong tidal currents propagating through the Strait of Messina. Like many young marine rifts, the basin is lined by steep streams draining the uplifting coasts and supplying sediment across narrow shelves. However, unlike many rifts, this basin is semi-enclosed. The present study explores the seabed morphology and sediment structures in this complex environmental setting, based on multibeam sonar, chirp profiler and seismic reflection data collected in 2006. Offshore channels include many that can be directly linked to onshore streams, suggesting that hyperpycnal flows are important for their formation. Near the Strait of Messina in depths shallower than 400 m, the channels are subdued, plausibly explained as an effect of strong tidal currents. The Messina Channel is characterised by abundant mass-wasting features along its outer bends, particularly on the Calabrian side. Coincidence of the channel course with faults suggests that the channel is structurally controlled in places. The chirp profiles generally show only shallow penetration, the evidence for coarse texture being consistent with the steep gradient of the basin that inhibits deposition from turbidity currents. By contrast, some locally discontinuous mounds exhibiting layered sub-bottom reflectors in the chirp profiles are interpreted as modern levee deposits formed from channelised turbidity current overspill. Overall, this semi-enclosed basin shows little evidence of substantial accumulations associated with modern turbidity current activity, any contemporaneous sediment supply evidently bypassing the area to be deposited in the Ionian Trench; as a consequence, this trench should be an archive of local slope failure and flood events.     

Evidence of hyperpycnal flows at the head of the meandering Kaoping Canyon off SW Taiwan

Using seismic and Chirp sonar profiles, this paper tests the hypothesis that hyperpycnal flows are the main factor controlling the formation and maintenance of the meandering Kaoping submarine canyon off SW Taiwan. Cross-section geometries, and erosional as well as depositional features vary along the canyon course. In the proximal, sinuous part of the canyon, down-cutting into the shelf strata has created a relief of 340 m. The cause of this intense erosion of the seafloor is suggested to be the frequent development of hyperpycnal flows. A seismic section across a meander in the distal part of the canyon shows levees formed by overspilled sediments at the outer bend, and a terrace characterized by relatively flat stratified facies at the inner bend. The geological setting and climatic conditions in SW Taiwan (e.g. earthquakes, typhoons, floods), as well as major river–canyon connections (for example, direct input of highly concentrated suspended sediment) would all promote hyperpycnal flow generation. This causes axial incision, canyon wall slumping, and the formation of levees by spill-over deposition in the upper reach of the Kaoping Canyon.