Investigating the components of the optically stimulated luminescence signals of quartz grains from sand dunes in China

The optically stimulated luminescence (OSL) signals from quartz consist of several physically distinct components, which are commonly referred to as fast, medium and slow components. In this study, the OSL components of quartz from the Taklimakan Desert and the Hunshandake sandy land in north China are investigated. Our results show that the relative contributions of OSL components to the bulk OSL signal can be significantly different among quartz grains from both deserts. Laboratory dosing, optical bleaching and heating experiments are used to test their effects on the relative contributions of quartz OSL components. It is found that cycles of dosing and optical bleaching have insignificant impact on the relative contributions of quartz OSL components, while heating to high temperature (500 °C) can significantly enhance the contribution of the fast component to the bulk OSL signals, especially for quartz samples from the Taklimakan Desert. Such results suggest that the different heating history of natural quartz grains plays an important role in controlling OSL components. Additionally, the quartz grains from the Hunshandake sandy land can easily be distinguished from those of the Taklimakan Desert, by using a ternary plot of fast-medium-slow components. The quartz grains from the Hunshandake sandy land exhibit a much stronger fast component than those from the Taklimakan Desert. This can be explained by that the quartz grains from the Hunshandake sandy land are mainly of igneous origin, while most of the quartz grains from the Taklimakan Desert are of low grade metamorphic origin.     

An analysis of the components of the luminescence signals of selected polymineral and quartz samples from loess in western China and southern Tajikistan,and their suitability for optical dating

Previous luminescence dating studies on loess from China and Tajikistan have focused on the establishment of the regional chronology of the loess sequences. In order to improve the precision and accuracy of optical ages derived from the loess of the last glacial period in these regions, we have examined the components of luminescence signals in three loess samples from western China and southern Tajikistan. Our results show that the polymineral IRSL and post-IR OSL, and quartz OSL signals from loess of the two regions are represented by three components, which display different bleaching and growth characteristics. While the composition of the polymineral IRSL signals is similar between samples with the same age from the two regions, in the case of quartz there is significant discrepancy in the proportion of the fast and medium components of the OSL signals. Greater difference is observed in the composition of the polymineral post-IR OSL signals for the loess from the two regions. The three components of polymineral IRSL signals yield almost identical equivalent dose values as that derived from the total IRSL signal. An apparent agreement in equivalent dose is observed between the fast component of the polymineral post-IR OSL and the quartz OSL for the loess of western China but not in the loess of the same age from southern Tajikistan. The fast component of the quartz OSL yields an equivalent dose 25% higher than that based on the total signal for the sample from the base of the Late Pleistocene loess in southern Tajikistan. This demonstrates the importance of signal selection for an accurate luminescence dating of Central Asian loess.     

OSL-thermochronometry using bedrock quartz: A note of caution

Optically stimulated luminescence (OSL) thermochronometry is an emerging application, whose capability to record sub-Million-year thermal histories is of increasing interest to a growing number of subdisciplines of Quaternary research. However, several recent studies have encountered difficulties both in extraction of OSL signals from bedrock quartz, and in their thermochronometric interpretation, thus highlighting the need for a methodological benchmark. Here, we investigate the characteristic OSL signals from quartz samples across all major types of bedrock and covering a wide range of chemical purities. High ratios of infrared to blue stimulated luminescence (IRSL/BLSL), an insensitive ‘fast’ OSL component, and anomalously short recombination lifetimes seen in time-resolved luminescence (TR-OSL), are often encountered in quartz from crystalline (magmatic and metamorphic) bedrock, and may hamper successful OSL dating. Furthermore, even when the desirable signal is present, its concentration might be indistinguishable from its environmental steady-state prediction, thus preventing its conversion to a cooling or heating history. We explore the saturation properties and the thermal activation parameters of various OSL signals in quartz to outline the capabilities and limitations for their use in low-temperature thermochronometry.     

Quartz OSL sensitivity from dating data for provenance analysis of pleistocene and holocene fluvial sediments from lowland Amazonia

The properties of the quartz luminescence signal have been shown to be a useful tool for sediment provenance analysis. These provenance studies are based on the sensitivity of the fast optically stimulated luminescence (OSL) component, which is also used for sediment dating. Besides the widespread occurrence of quartz in terrigenous sediments, OSL sensitivity can be acquired using relatively fast and low-cost measurements compared to sediment provenance analysis methods based on accessory minerals or isotopes. Additionally, laboratories worldwide already have an extensive database of recorded quartz OSL signals primarily measured for dating studies, and these data could potentially be repurposed for provenance analysis of Quaternary sedimentary systems through OSL sensitivity calculation. Here, we investigate the use of OSL quartz signals measured in sediment dating surveys for OSL sensitivity calculation and evaluation of changes in sediment sources. The OSL sensitivity was calculated and expressed as %BOSL_F, which corresponds to the percentage of the fast OSL component signal (blue stimulation) to the total OSL curve; such approach is advantageous as it does not require any normalisation of the measured signal intensity to dose or aliquot size (weight). Three sets of samples from Amazonian fluvial sediments are investigated: two sets of Holocene floodplain sediments representing different sediment sources to the Amazonian fluvial system, i.e. the Amazon craton and the Andes Mountain belt, and a set of samples from the Içá Formation, a paleo-fluvial system active during the Pleistocene whose provenance is not fully known. Results show that the quartz OSL signal derived from the first test doses (T_n) applied in dating protocols had the best performance for %BOSL_F calculation when compared to results from a measurement protocol designed specifically for sediment provenance analysis. There is significant correlation (R² = 88) between sensitivities derived from T_n and a specific OSL provenance analysis protocol. The proposed approach indicates to be appropriate for sediment provenance analysis since it is able to discriminate signal differences among samples from known sources: Brazilian cratonic quartz yield high sensitivity values (mean %BOSL_F >70), in contrast to the relatively lower values from Andean quartz (mean %BOSL_F <50). In general, quartz OSL sensitivities from the Içá Formation samples fall into the same range of modern sediments transported by the Içá and Japurá rivers draining the Andean Eastern Cordillera of Colombia and Ecuador. We also observe a decrease in quartz OSL sensitivity during the Holocene, notably after 4 ka, with younger deposits showing lower sensitivity. Sediment provenance variations are discussed in terms of watershed rearrangement and/or precipitation-driven changes during the Late Pleistocene and Holocene across Amazonia.     

Luminescence characteristics of Scandinavian quartz,their connection to bedrock provenance and influence on dating results

The success of optically stimulated luminescence (OSL) dating relies to a large extent on suitable characteristics of the analysed mineral, in this case quartz. Previous OSL dating of Quaternary sediments in Scandinavia has shown that quartz characteristics vary widely across the region, resulting in dating studies with varied success. The aim of this study is to provide an overview of quartz luminescence characteristics in Sweden and Norway, evaluate their effect on dating results and discuss the underlying causes of their variability.A qualitative assessment of luminescence signal characteristics of quartz from Late Quaternary sediment deposits, from a range of geological and geographical settings, has been made by re-analysing data from samples previously dated at the Lund Luminescence Laboratory, Sweden. This allowed a general characterisation of signals and a study of the relationship of these properties to dating result ‘quality’. To quantify the results, selected samples were further analysed with single-grain measurements and with small aliquots.The results show that the average luminescence signal from quartz is fairly dim but dominated by a fast signal component and changes little during measurement. Dose determination precision is ∼4% for 8-mm aliquots and ∼6% for 2-mm aliquots. However, the luminescence signal characteristics have a spatial variation across Sweden and Norway, which appears to correlate with large-scale bedrock units. In areas of sedimentary bedrock outside the Scandinavian mountains and within the Blekinge-Bornholm province, the quartz is brighter and has a stronger fast signal component, while in the Caledonian orogenic belt, the signal is very weak and lacks a fast component. These differences lead to a range in precision of doses, from ∼2% to >40% (for doses in the order of 5–400 Gy), and in the number of rejected aliquots (0–100%) depending on location, but also implies that quartz luminescence can be used as a provenance indicator in part of Sweden and Norway.     

Investigating the optically stimulated luminescence dose saturation behavior for quartz grains from dune sands in China

The optically stimulated luminescence (OSL) signals from quartz have been widely used to estimate the equivalent dose (D_e) of environment radiation after the deposition of mineral grains. However, the usage of quartz is often limited due to the lower saturation behavior compared with feldspar. Saturation limits among quartz (defining the upper dating range) vary significantly. It is important to better understand the reason for various dose saturation behaviors of the quartz OSL signals. In this study, coarse quartz grains were extracted from the Taklimakan Desert and the Hunshandake sandy land in north China and the dose saturation behavior of quartz OSL signals were studied. Our results suggest that the quartz grains produce very different aliquot-specific dose response curves, showing the significant variability in dose saturation characteristics for OSL signals. Laboratory dosing, optical bleaching and heating experiments were designed to simulate their effects on the dose saturation behavior for the quartz OSL. The results demonstrate that cycles of dosing and optical bleaching have insignificant impact on the OSL dose growth curves, while the heating to high temperature (above 400 °C) can significantly change the dose saturation characteristics for the quartz OSL. Such results suggest that the different heating history of quartz might be an important factor for the variability in dose saturation characteristics for OSL signals. Additionally, the quartz grains from the Hunshandake sandy land exhibit lower dose saturation level for OSL signals, compared with that from the Taklimakan Desert. This can be explained that the quartz grains from Hunshandake sandy land are mainly of igneous origin, while the quartz grains from Taklimakan Desert are mainly of metamorphic origin.     

Violet stimulated luminescence as an alternative for dating complex colluvial sediments in the Atacama Desert

Luminescence dating has become a key tool in studies of the Quaternary. The typically stable luminescence response of quartz grains and the absence of a significant internal dose, make quartz minerals the preferred dosimeter for monitoring the burial dose in sediments. Unfortunately, the reliability of conventional OSL (optically stimulated luminescence) dating, based on blue stimulation, can be compromised when the luminescence decay is not dominated by a rapidly decaying and stable part of the luminescence signal (i.e. the fast component). On the other hand, standard methods in luminescence dating are limited to ages of a few hundred kiloyears. In this study, violet stimulated luminescence (VSL) has been used as a means to overcome both problems, applied to a series of colluvial deposits in the Atacama Desert, Chile. Quartz from this region, characterized by poor blue-OSL response, showed a reproducible and stable VSL signal capable of recovering given doses up to ∼500 Gy and a saturation dose twice as high as conventional OSL. The VSL response from these samples has been studied in detail and the estimated ages have been compared with an already established chronology for the same site, based on IRSL of potassium feldspar single grains. Results agree for the dose range of the profile studied, ∼100–250 Gy, equivalent to ages of 29–79 ka confirming the suitability of VSL for dating sedimentary quartz with unreliable blue-OSL response and to extend the age range of conventional OSL dating.     

Implications of broad dose distributions obtained with the single-aliquot regenerative-dose method on quartz fine-grains from loess

Six samples were collected from a section of Peoria Loess in Eustis, North America, for optically stimulated luminescence (OSL) dating of quartz, and all except one (LV90) produced narrow dose distributions. A comparative study was conducted on this sample and on a ‘well-behaved’ sample (LV91), involving other dating methods and examination of the quartz OSL. These investigations revealed differences in the quartz OSL growth with dose, OSL response to thermal treatments and the range of components within the OSL signals. An ultra-fast component was found in LV90 that displayed a higher rate of sensitivity change than the fast component and this had a malign influence on the determination of the equivalent dose. The distinctive luminescence characteristics of LV90 imply either a change in wind dynamics and/or the source area for the silt.     

Chronology of an oyster reef on the coast of Bohai Bay, China: Constraints from optical dating using different luminescence signals from fine quartz and polymineral fine grains of coastal sediments

Fossil oyster reefs are indicators of past sea levels, and their formation is usually dated by means of radiocarbon. However, radiocarbon dating of the shells from coastal areas may be complicated by the varying sources of carbon. Here we applied optical dating methods to date the samples from above and below a fossil oyster bed in a section on the coast of Bohai Bay, China. The optical ages of the sediments were used to constrain the oyster bed. Single-aliquot regenerative-dose procedures using the OSL signal from fine grain quartz, the IRSL and post-IR OSL signals from polymineral fine grains were employed to determine equivalent dose (D_e). The behaviors of the different luminescence signals from quartz and polymineral grains during D_e measurements were examined. The results showed that the quartz OSL signal is more reliable than the polymineral IRSL and post-IR OSL signals with respect to dating for these coastal samples. The optical ages indicated that the oyster reef formed between ca. 6.2 and 5.0 ka.     

Luminescence dating of marine sediments from the Sea of Japan using quartz OSL and polymineral pIRIR signals of fine grains

Luminescence dating has long been used for chronological constraints on marine sediments due to the ubiquitous dating materials (quartz and feldspar grains) and its applicability over a relatively long time range. However, one of the main difficulties in luminescence dating on marine sediments is partial bleaching, which causes age overestimations. Especially, partial bleaching is typically difficult to be detected in the fine grain fraction (FG) of marine sediments. The recently developed feldspar post-IR IRSL (pIRIR) protocol can detect non-fading signals and thus avoid feldspar signal instability. In the current study, fine grains were extracted from a gravity core in the northern Sea of Japan, and the aim is to test the feasibility of using different luminescence signals with various bleaching rates to explore the bleaching conditions of fine grain fraction in marine sediments. The results suggest that the quartz OSL signal and polymineral pIRIR signals at stimulation temperatures of 150 °C and 225 °C (pIRIR₁₅₀ and pIRIR₂₂₅) of FG were well bleached prior to deposition. The OSL ages were used to establish a chronology for this sedimentary core and the resulting age-depth relationship is self-consistent and comparable with radiocarbon dates. We conclude that different luminescence signals with various bleaching rates can be used to test the bleaching conditions of fine grain fraction in marine sediments; and the luminescence dating can be applied to marine sediments with great potential.     

Selection of integration time intervals for quartz OSL decay curves

In quartz optically stimulated luminescence (OSL) dating protocols, an initial integral of the OSL decay curve is used in the calculation of equivalent dose, once a background integral has been subtracted. Because the OSL signal commonly contains a number of exponentially decaying components, the exact choice of time intervals used for the initial-signal and background integrals determines the composition of the net signal. Here we investigate which combination of time intervals will produce the net signal most dominated by the fast OSL component, while keeping an acceptable level of precision. Using a three-component model of OSL decay, we show that for a specified level of precision, the net signal most dominated by the fast component can be obtained when the background integral immediately follows the initial signal and is approximately 2.5 times its length. With this ‘early-background’ approach, the contribution of slow components to the net signal is virtually zero. We apply our methods to four samples from relatively young deposits. Compared to the widely used ‘late-background’ approach, in which the background integral is taken from the last few seconds of OSL, we find less thermal transfer, less recuperation and a higher proportion of aliquots yielding an equivalent dose in agreement with expectations. We find the use of an early background to be a simple and effective way of improving the accuracy of OSL dating, and suggest is should be used in standard protocols.     

海原断裂带刺儿沟剖面烘烤次生黄土的光释光测年及其地质意义

选择海原活动断裂带刺儿沟剖面2个烘烤次生黄土样品LEDL0588H和LEDL0365的细颗粒石英,采用改进后的单测片再生法(SAR)和简单多测片再生剂量法(SMAR)进行了一系列实验研究。2个样品细颗粒石英的光释光信号均以快速组分为主,其等效剂量(DE)的预热坪实验表明,在180～260℃的预热温度范围内均能获得基本一致的DE值。SAR法测量不同预热温度下的释光感量变化、剂量恢复实验和LN/TN比值的关系以及SMAR法测量中LN/TN比值与预热温度的关系的研究表明,文中所采用的流程能有效地校正测量过程中释光信号感量变化。2种方法均适用于采自不同层位的2个烘烤样品细颗粒石英的OSL测年,并获得了非常接近的OSL年龄。2个样品最后一次被烘烤的时间可能代表的是同一时期的人类活动     

Problems associated with luminescence dating of Late Quaternary glacial sediments in the NW Scottish Highlands

Linking the timing of glacial episodes and behaviour to climatic shifts that are documented in ice and marine sedimentary archives is key to understanding ocean-land interactions. In the NW Scottish Highlands a large number of closely spaced (‘hummocky’) moraines formed at retreating glacier margins. Independent age control on one palaeo-glacier limit is consistent with the timing of Younger Dryas (YD) glaciation in the area, but adjacent glacier lobes have remained undated due to the lack of sites and material for ¹⁴C dating. Direct dating of ice-marginal moraines using optically stimulated luminescence (OSL) techniques has never been attempted before in Scotland, but if successful, they may be the most appropriate methods for constraining the age of sediment deposition in the absence of organic material. Coarse-grained quartz and K-feldspar minerals from supraglacial sheet flow deposits and glacilacustrine sediments within ice-marginal moraines were analysed using the single-aliquot regenerative-dose (SAR) protocol. Independent age control and clear geomorphological relationships indicate that all samples should yield YD or post-Last Glacial Maximum (LGM) ages. Quartz OSL shine down curves showed low luminescence sensitivity, significant medium-to-slow components, a weak fast component, and scattered SAR data; Linearly Modulated-OSL (LM-OSL) measurements confirmed that the fast component was weak or absent. In contrast, feldspar infrared stimulated luminescence (IRSL) was highly sensitive with excellent SAR data. However, SAR data from 3 mm diameter aliquots of feldspar (200 grains) give higher than expected equivalent doses (D_e) by an order of magnitude. SAR measurements of small clusters of feldspar grains (ranging from 1–8) considerably broaden the apparent D_e distribution, but even the lowest value is about 2–3 times the expected D_e. Two possibilities arise to explain the quartz and feldspar data: (1) that glacial sequences in the NW Highlands re-work inherited (older) glacial deposits and that some of the pre-Devensian existing glacial landforms have only been modified during Devensian glaciation; or (2) that the sedimentary processes operating in these ice-marginal environments are not conducive to adequate bleaching of quartz and feldspar grains. Our study implies that ice-proximal supraglacial sediments from this region in NW Scotland reflect older ages of deposition, but dating YD sediments has not been possible.     

Application of OSL dating to middle to late Holocene arroyo sediments in Kanab Creek,southern Utah,USA

Middle to late Holocene alluvium, identified as Quaternary alluvial unit 4 (Qa4), along Kanab Creek in southern Utah, USA was dated using optically stimulated luminescence (OSL) on quartz sand, and by radiocarbon dating of detrital charcoal. Entrenchment beginning in 1882 AD created arroyo walls that expose up to 35 m of the Qa4 alluvium. The stratigraphy and sedimentology suggest that fluvial aggradation along the study reach occurred rapidly. Due to the high sediment supply, short transport distances and semi-arid climate with flashy discharge, partial bleaching (zeroing) of the luminescence signal was expected to be a problem for OSL dating. We approached this problem by first using small-aliquot (∼20 grains) and single-grain dating of quartz sand to reduce the number of grains contributing to the OSL signal. Second, we used statistical parameters based on single-grain and small-aliquot equivalent dose (De) distributions of bleached sediment to help identify partial bleaching and to inform if a minimum age model (MAM) should be used for age calculation. Comparison of results with radiocarbon ages demonstrates the success of OSL dating on Kanab Creek arroyo-fill deposits, although careful attention should be paid to the sedimentary facies and stratigraphy of the targeted sample horizon to minimize the effects of partial bleaching. Thin, decimeter-scale plane-bedded and ripple cross-bedded sandy lithofacies were found to be the best target for OSL dating, as these sediments showed minimal evidence for incomplete solar resetting. Additionally, results generally indicate that better-bleached sediments are found in downstream reaches. Age control from these arroyo-fill deposits was acquired in order to fulfill larger research goals of understanding regional arroyo incision and aggradation cycles.     

RESIDUAL POST-IR IRSL SIGNALS OF POTASSIUM FELDSPAR FROM MODERN SAG POND DEPOSITS OF CENTRAL ALTYN TAGH FAULT: IMPLICATION FOR DATING YOUNG PALEOSEISMIC EVENTS

The Altyn Tagh Fault(ATF)is one of the most prominent active strike-slip faults in the India-Eurasia collision. Fresh features of surface ruptures, which are attributed to seismic events taking place in the last millennium, are identified at several sites along the Che'erchen River to Qingshui River section on the central part of ATF. Accurate chronology of these earthquake events would help understand the spatial-temporal relationship of the recent earthquakes. However, great difficulties are encountered. The central ATF is located in the arid area, and the vegetation cover is so limited that rare organic materials appropriate for radiocarbon dating can be found in the sediments. Luminescence dating technique may serve as an alternative to directly determine the burial ages of the earthquake related sediments. The optically stimulated luminescence(OSL)signal of quartz, which has been widely employed for luminescence dating, displays unwanted charateristics for accurate dating. Firstly, the quartz OSL signal is not sensitive to irradiation, which leads to low signal-to-noise ratio or even no measurable quartz OSL signal. Secondly, the targeted samples of the last millennium are very young, and the radiation dose received during the burial is expected to be less than 3~4Gy, which futher deteriorates the signal-to-noise ratio of the quartz OSL signal. Therefore, quartz OSL signal is not appropriate for dating the sediments relevant to the recent earthquakes on ATF.
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(D_e)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL₁₇₀ signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the D_e plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL₁₇₀ signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL₁₇₀ D_e values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of D_e distribution of well sorted and stratified sag pond deposits is consistent with the minimum D_e value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum D_e values from the MAM-3 and the FMM. The minimum D_e values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL₁₇₀ age would be overestimated by 200~300a.
The post-IR IRSL₁₇₀ procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed.     

ESR and OSL dating of fossil-bearing deposits from Naracoorte Cave Complex palaeontological sites,south Australia

Little work has been undertaken on combined dating of sedimentary quartz grains using electron spin resonance (ESR) and optically stimulated luminescence (OSL) techniques in Australia. This study aims to assess the suitability of a combined ESR and OSL dating approach for establishing improved chronologies of Middle-Late Pleistocene deposits within the Naracoorte Cave Complex (NCC), South Australia. Here, we apply ESR and OSL dating in tandem to a series of samples collected from three different NCC sites: Whale Bone, Specimen and Alexandra cave. ESR quartz dating focuses on the multi-centre (MC) approach, which involves comparative evaluations of Al and Ti centre signals, while paired luminescence dating focuses on single-grain OSL analysis and includes examination of multi-grain averaging effects. The comparative ESR-OSL dating results exhibit broad agreement for deposits spanning 50–150 thousand years, with either the Ti–H or Al centre ages overlapping with paired OSL ages at 2σ in nearly all cases. MC ESR evaluations (Al v Ti–Li v Ti–H age assessments) indicate incomplete resetting of the bleachable Al centre signal for a small number of samples. Two-thirds of samples exhibit Ti–Li ages that are significantly older than corresponding Al centre ages, which is unexpected from a bleaching kinetics perspective and may indicate a broader reliability issue for Ti–Li palaeodose evaluation with these particular samples. Our findings: (i) support the applicability of both palaeodosimetric dating methods in this depositional setting; (ii) highlight the merits of applying combined ESR-OSL analyses in tandem, and; (iii) provide one of the first reliable evaluations of quartz ESR MC dating for samples with natural dose ranges as low as only a few tens of Gy. These results show that the Whale Bone, Specimen and Alexandra cave sites are temporally related and can be used to derive multi-site reconstructions of faunal assemblages and palaeoenvironmental history.     

Quartz luminescence dating of Anglian Stage (MIS 12) fluvial sediments: Comparison of SAR age estimates to the terrace chronology of the Middle Thames valley,UK

Quartz optically stimulated luminescence (OSL) is increasingly being used to constrain the depositional age of fluvial and glaciofluvial sequences over orbital (Milankovitch) timescales within the British Isles. Few of these previous studies have had any age control; however there is some evidence that OSL ages based on the single aliquot regenerative dose (SAR) protocol may be subject to systematic age underestimation as samples approach saturation. In this study, the age of 12 luminescence samples from a chronologically well-constrained site dating to 450 ka from the Thames terrace sequence, southern Britain, was measured using SAR in order to test the performance of the method close to its upper age limit. The characteristics, dose response and thermal stability of the OSL signal in these samples were assessed by investigating equivalent dose (D_e) as a function of stimulation time and component-resolved pulse annealing. Despite the fact that the samples are dominated by the quartz fast component, these results showed that both the medium and slow components have lower stabilities than the fast component, but with the unstable medium component most affecting the initial part of the OSL signal used in dating. Based on isolating the fast component either through curve fitting or eliminating the medium component using the early background subtraction method, OSL ages up to 450 Gy were found to compare well with the expected age of the site of 450 ± 23 ka. In contrast, a systematic age underestimation of 10% was manifested at lower doses when using the initial part of the OSL signal, contaminated by the medium component. These results suggest that the early background subtraction method should be used when dating in the non-linear part of the growth curve as it provides a better separation of thermally unstable signals and represents a more convenient approach than curve fitting in well-behaved samples.     

Single grain optically stimulated luminescence dating of glacial sediments from the Baiyu Valley,southeastern Tibet

The Qinghai-Tibetan Plateau is an important area for the study of Quaternary glaciation. Optically stimulated luminescence (OSL) dating has the potential to contribute to the chronology of glaciation in this region, but it is important to assess the accuracy of OSL dating of these glacial sediments. In this study, single grain quartz OSL signals are examined for five glacial samples collected from the moraines outside the Baiyu Valley, southeastern Tibet. The quartz grains exhibit poor luminescence characteristics, with a small proportion of grains passing the screening criteria. Grains which pass the screening criteria have relatively low signal intensity, leading to D_e values with large uncertainties. MAM and CAM were used to determine D_e values for these samples. The OSL ages are consistent with the sequence of events derived from the geomorphological relationship of the samples, and also with previous published radiocarbon ages. However, it is more difficult to reconcile the OSL ages and the terrestrial cosmogenic nuclide (TCN) ¹⁰Be ages. Analysis of both single grain quartz OSL data and TCN ¹⁰Be data is complex in this area. Further work is required to increase confidence in the OSL ages generated for the glacial sediments from this region.     

Downstream changes in quartz OSL sensitivity in modern river sand reflects sediment source variability: Case studies from Rocky Mountain and Andean rivers

OSL (optically stimulated luminescence) sensitivity of quartz has been shown to either (1) record downstream sediment transport related to increased number and duration of light exposure cycles or (2) be a function of source geology, presenting a potential tool to track sediment provenance. To test these competing models this study leverages a suite of modern river samples from an extensional basin system in the Rocky Mountains of western USA (Bear River) and a retroarc foreland basin system in the southern Central Andes of Argentina (Río San Juan) to understand the relationships among quartz luminescence sensitivity, sediment transport distance, and catchment lithologies. We compare our results with petrographic analysis of the river sand composition, and characterization of the lithology and morphometrics of the river catchments. Samples taken along the Bear River and its major tributaries in the Rocky Mountains show a progressive downstream decrease in quartz OSL sensitivity that records variation in sediment provenance and steady contribution of lower OSL sensitivity quartz recycled from Palaeozoic passive margin stratigraphy. Andean river sand samples from the Rio San Juan network exhibit pervasive low sensitivity quartz derived from Andean arc volcanic rocks and recycled Neogene foreland basin strata. These modern river sand data do not show increased sensitivity with transport distance and instead indicates that in these landscapes, quartz OSL sensitivity is an intrinsic property of the source rock. Our study shows that river sands primarily composed of older, recycled low-strained quartz derived from quartzite lithologies exhibit the highest quartz sensitivity values. Moderate quartz OSL sensitivity values are observed in rivers with young igneous quartz derived directly from the volcanic and intrusive rocks. Conversely, microcrystalline quartz in chert lithic grains or polycrystalline quartz found in composite metamorphic lithic grains record the lowest quartz OSL sensitivity values. Determining the controlling factors of quartz sensitivity in river sand provides a current baseline for resolving paleogeographic and paleodrainage histories in the sedimentary record and provides further understanding of how sediments are eroded, transported, and deposited in fluvial systems with diverse tectonic settings and geologic source rocks.     

Optical dating of perennially frozen deposits associated with preserved ancient plant and animal DNA in north-central Siberia

We present chronological constraints on a suite of permanently frozen fluvial deposits which contain ancient DNA (aDNA) from the Taimyr Peninsula of north-central Siberia. The luminescence phenomenology of these samples is first discussed, focusing on the optically stimulated luminescence (OSL) decay curve characteristics, thermoluminescence (TL) properties, and signal compositions of quartz from these previously unstudied deposits. Secondly, we assess the suitability of these samples for OSL dating and present the OSL chronologies obtained using both single-grain and multi-grain equivalent dose (D_e) measurements. The results of our analyses reveal a large amount of inter-aliquot variability in OSL decay curve shape that is directly related to differences in the size of the 280 °C TL peak and the associated slowly bleached ‘S2’ OSL component. Longer OSL stimulation durations are adopted in the D_e measurement procedure to prevent the progressive build-up of slowly bleached signal components throughout successive single-aliquot regenerative-dose (SAR) measurement cycles. The use of low preheat temperatures in the SAR procedure also reduces the deleterious effects of these slowly bleached signal components. The resultant single-grain and multi-grain OSL chronologies obtained using this approach are stratigraphically consistent and are in close agreement with independently established ¹⁴C ages at our sites. The findings of this research reveal the potential of OSL dating as a means of providing a reliable chronometric framework for sedimentary aDNA records in permafrost environments.