共查询到20条相似文献,搜索用时 31 毫秒
1.
The present study aimed to test reliability of luminescence and electron spin resonance (ESR) methods to date tephra. We investigated on three Japanese marker tephras, Ikeda-ko (6.4 ka), Aira-Tn (30 ka) and Aira-Iwato (45–50 ka). A systematic studies were performed using different minerals (quartz and feldspar), different grain fractions (75–250 and 250–500 μm), different luminescence and ESR signals, like optically stimulated luminescence (OSL) of quartz, infrared stimulated luminescence (IRSL) of feldspar, including recently developed least faded post infrared IRSL (pIR-IRSL), and ESR signals from paramagnetic centers Al and Ti–Li of quartz. Ages obtained using pIR-IRSL signal of plagioclase with preheat of 320 °C, 60 s and stimulation at 300 °C are consistent with the reference ages. High dose detection range (up to ∼600 Gy) and accurate age estimation enable pIR-IRSL of feldspar a promising methodology to date quaternary tephra. ESR ages from quartz are grossly correlated with the reference ages but large deviation and large associated errors are observed, possibly due to either low signal to noise ratio or heterogenous dose response of different aliquot in multiple aliquot additive dose (MAAD) approach. 相似文献
2.
An up to 15 m thick alluvial fan and aeolian sandsheet complex is exposed in the upper Senne area, on the southern slope of the Teutoburger Wald Mountains (NW Germany). The origin and age of these deposits have been controversially discussed for many years, ranging from Saalian glaciofluvial to periglacial Weichselian deposits. In order to provide a high-resolution chronological framework for the deposits, we conducted luminescence dating of 12 samples from two localities (Oerlinghausen and Augustdorf pits). Both coarse-grain potassium-rich feldspar and quartz minerals were used for luminescence dating. Feldspar was measured using an elevated temperature post-IR infrared stimulated luminescence (IRSL). Quartz was measured using optically stimulated luminescence (OSL) with a conventional single aliquot regenerative dose (SAR) protocol. Feldspar results tend to overestimate quartz ages for the lower part of the sections (alluvial plain and alluvial fan facies) but are consistent with quartz ages for the upper part of the sections (aeolian facies). Quartz ages from both central and minimum age models suggest deposition during the Late Pleistocene Pleniglacial to Late Glacial. 相似文献
3.
Luminescence dating has become a key tool in studies of the Quaternary. The typically stable luminescence response of quartz grains and the absence of a significant internal dose, make quartz minerals the preferred dosimeter for monitoring the burial dose in sediments. Unfortunately, the reliability of conventional OSL (optically stimulated luminescence) dating, based on blue stimulation, can be compromised when the luminescence decay is not dominated by a rapidly decaying and stable part of the luminescence signal (i.e. the fast component). On the other hand, standard methods in luminescence dating are limited to ages of a few hundred kiloyears. In this study, violet stimulated luminescence (VSL) has been used as a means to overcome both problems, applied to a series of colluvial deposits in the Atacama Desert, Chile. Quartz from this region, characterized by poor blue-OSL response, showed a reproducible and stable VSL signal capable of recovering given doses up to ∼500 Gy and a saturation dose twice as high as conventional OSL. The VSL response from these samples has been studied in detail and the estimated ages have been compared with an already established chronology for the same site, based on IRSL of potassium feldspar single grains. Results agree for the dose range of the profile studied, ∼100–250 Gy, equivalent to ages of 29–79 ka confirming the suitability of VSL for dating sedimentary quartz with unreliable blue-OSL response and to extend the age range of conventional OSL dating. 相似文献
4.
Raised beach sand deposits along the southeastern coast of Norway were dated by optical (OSL) and infrared stimulated luminescence (IRSL) and the quartz and K-feldspar luminescence characteristics were described. Due to the poor quartz luminescence characteristics, only a limited number of samples were suitable for OSL dating. More promising are the K-feldspar extracts, with typical K-feldspar luminescence characteristics and no sign of fading. For equivalent dose (De) determination, sand-size quartz and feldspar extracts were used, applying a single aliquot regenerative (SAR) protocol. Both, OSL and IRSL De estimates show a wide distribution, unexpected for beach deposits. The calculated OSL and IRSL age estimates were generally in good agreement and the correctness of the ages was confirmed by independent age control. Because only a limited number of the quartz samples were suitable for OSL dating, IRSL dating of the K-feldspar represents an alternative to OSL quartz dating. 相似文献
5.
RESIDUAL POST-IR IRSL SIGNALS OF POTASSIUM FELDSPAR FROM MODERN SAG POND DEPOSITS OF CENTRAL ALTYN TAGH FAULT: IMPLICATION FOR DATING YOUNG PALEOSEISMIC EVENTS
下载免费PDF全文
![点击此处可从《地震地质》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The Altyn Tagh Fault(ATF)is one of the most prominent active strike-slip faults in the India-Eurasia collision. Fresh features of surface ruptures, which are attributed to seismic events taking place in the last millennium, are identified at several sites along the Che'erchen River to Qingshui River section on the central part of ATF. Accurate chronology of these earthquake events would help understand the spatial-temporal relationship of the recent earthquakes. However, great difficulties are encountered. The central ATF is located in the arid area, and the vegetation cover is so limited that rare organic materials appropriate for radiocarbon dating can be found in the sediments. Luminescence dating technique may serve as an alternative to directly determine the burial ages of the earthquake related sediments. The optically stimulated luminescence(OSL)signal of quartz, which has been widely employed for luminescence dating, displays unwanted charateristics for accurate dating. Firstly, the quartz OSL signal is not sensitive to irradiation, which leads to low signal-to-noise ratio or even no measurable quartz OSL signal. Secondly, the targeted samples of the last millennium are very young, and the radiation dose received during the burial is expected to be less than 3~4Gy, which futher deteriorates the signal-to-noise ratio of the quartz OSL signal. Therefore, quartz OSL signal is not appropriate for dating the sediments relevant to the recent earthquakes on ATF.
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(De)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL170 signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the De plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL170 signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL170 De values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of De distribution of well sorted and stratified sag pond deposits is consistent with the minimum De value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum De values from the MAM-3 and the FMM. The minimum De values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL170 age would be overestimated by 200~300a.
The post-IR IRSL170 procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed. 相似文献
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(De)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL170 signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the De plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL170 signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL170 De values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of De distribution of well sorted and stratified sag pond deposits is consistent with the minimum De value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum De values from the MAM-3 and the FMM. The minimum De values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL170 age would be overestimated by 200~300a.
The post-IR IRSL170 procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed. 相似文献
6.
Fluvial sediments of the middle Atbara River Valley, eastern Sudan, contain abundant vertebrate fossils and stone tools. Previous work described two sedimentary units, the Butana Bridge Synthem (BBS) and the Khashm El Girba Synthem (KGS), with three divisions each (BBS1-3 and KGS1-3, from bottom to top, respectively). 230Th/U dating on bivalve shells suggested an age of ∼126 and ∼92 ka for the basal KGS2 and basal KGS3, respectively, and mammalian biochronology in combination with magnetostratigraphy suggested an age of late Early to early Middle Pleistocene for the underlying BBS. To establish a detailed chronology of this fluvial sedimentary sequence, we collected 17 luminescence samples from both sides of the Atbara River close to the Butana Bridge. Quartz OSL dating was applied to samples from the upper part of the profile (upper KGS2 and KGS3), but the signal reached saturation within the upper ∼10 m of the sequence. To select a suitable feldspar signal to date older samples beyond the limit of the quartz OSL, a comparison of the quartz OSL, feldspar post-IR IRSL at 225 and 290 °C, and pulsed IRSL signal at 50 °C was conducted for a sample from KGS3. The result showed that only the fading corrected pulsed IRSL yielded an age consistent with the quartz OSL, and the post-IR IRSL signals (both at 225 and 290 °C) overestimated the quartz age significantly. We therefore selected the pulsed IRSL signal to date the older deposits. The luminescence ages indicate that the entire BBS - KGS sequence was deposited between 224 ± 23 ka and <17 ± 1 ka, corresponding to marine isotope stages (MIS) 7–2, significantly revising previous conclusions. 相似文献
7.
Testing the application of quartz and feldspar luminescence dating to MIS 5 Japanese marine deposits
The applicability of both quartz and feldspar luminescence dating was tested on twenty-five samples from a marine succession now forming a coastal cliff at Oga Peninsula, Honshu Island, Japan. The quartz optically stimulated luminescence (OSL) signal shows thermal instability and linear modulated (LM)-OSL analysis revealed the dominance of a slow component. When compared with independent age control provided by two marker tephras, the quartz OSL ages grossly underestimate the depositional age. In contrast, potassium (K)-rich feldspar is a suitable dosimeter when measured using post-IR infrared stimulated luminescence (IRSL) at 225 °C (pIRIR225). Scanning electron microscope (SEM) analyses on the feldspar extracts revealed that the grains are amorphous with small crystalline inclusions; using standard internal dose rate parameters, this would result in a too large dose rate. Dose rates were calculated using the observed grain size of 40 ± 20 μm with an assumed K concentration of 12.5 ± 0.5%. The fading corrected pIRIR225 ages agree well with independent age control, and the sediments of the Katanishi Formation were deposited between 82 ± 6 and 170 ± 16 ka. This study demonstrates that pIRIR dating of feldspar is a powerful chronological tool for the dating of sediments of volcanic origin. 相似文献
8.
Temporal constraints for the Late Pleistocene deposition of eolian dunes that occur in central and northern Alberta, Canada can be provided by dating sediments from the dune bases using luminescence techniques. In places, however, the postglacial dunes overlie glaciofluvial sands that resemble the eolian deposits in texture such that demarcating the bases of the dunes is often problematic. In this study we address the problem by employing a portable optically stimulated luminescence (OSL) reader to construct luminescence profiles that depict luminescence signal variation with depth. With the portable OSL reader, measurement can be performed on bulk sediments, negating the need for laborious separation procedures to isolate pure mineral fractions, as is required in regular luminescence dating. Measurements can also be carried out in the field, permitting quicker decision making during sample collection. Results from this study, presented as depth variations of feldspar derived infrared stimulated luminescence (IRSL) signals and predominantly quartz‐generated post‐IR blue OSL signals, show that luminescence profiling enables one to distinguish between eolian deposits that make up the dunes from the underlying non‐eolian sands. The identification of such cryptostratigraphic interfaces is made possible by differences in the dosimetric histories of the sediments. The delineation of the dune bases allows targeted sampling that yields best luminescence age approximations for the initiation of postglacial eolian deposition in the region. Luminescence profiling of eolian sequences would also, in theory, permit the identification of depositional breaks of extended duration. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
9.
Jakob Wallinga Adrie J.J. Bos Pieter Dorenbos Andrew S. Murray Jeroen Schokker 《Quaternary Geochronology》2007,2(1-4):216-221
Infrared-stimulated luminescence (IRSL) dating of feldspars has the potential to date deposits beyond the age range of quartz optical (OSL) dating. Successful application of feldspar IRSL dating is, however, often precluded due to anomalous-fading, the tunnelling of electrons from one defect site to another. In this paper we test procedures proposed for anomalous-fading correction by comparing feldspar IRSL and quartz OSL dating results on a suite of samples from continental deposits from the southeastern Netherlands. We find that even after anomalous-fading correction IRSL ages underestimate the burial age of the deposits and argue that this may be a consequence of a dependency of anomalous fading rate on the dose rate and on the absorbed dose. 相似文献
10.
Landforming processes are highly active in the Arctic, and luminescence dating can be used to establish a chronological framework for these processes. For example, luminescence ages of raised littoral and marine deposits provide the age control for many reconstructions of Pleistocene events in the Arctic. Due to the nature of the depositional environment (e.g. short transport distance, turbid water, long polar night) these types of sediment may not be completely zeroed at the time of deposition. To test the significance of incomplete bleaching in this type of environment, surface sediments were sampled along a transect from the margin of a glacier out into a nearby bay on NW Svalbard. The water in the bay is very turbid (secchi depth 0.1 m), but there is significant reworking by waves along the shores.Quartz optically stimulated luminescence (OSL) and feldspar infrared stimulated luminescence (IRSL) were measured using sand-sized grains. For quartz OSL and feldspar IRSL (50 °C) the ice-proximal sample showed relatively high doses (∼12 Gy) while nearby beach sand and shallow-marine deposits, as well as ice-distal sandur sediments, had much lower doses: most OSL doses were consistent with zero, while IRSL (50 °C) ranged from 0.5 to 6.5 Gy. Post-IR IRSL (290 °C) doses were overall much higher (∼20–55 Gy), which partly is due to a significant (∼12 Gy) unbleachable residual, and partly due to slower bleaching rates than for the IRSL (50 °C) signal.In this Arctic environment it appears that bleaching is limited in the first ∼100 m of meltwater transport from the glacier margin, but for material transported at least 3 km bleaching of OSL and IRSL (50 °C) signals is more or less complete. Given the very limited light penetration through the seawater in the bay, any bleaching must have occurred during fluvial/subaerial transport to the bay or by wave-reworking on the beach. Apart from the ice-proximal glacifluvial sediments, residual apparent doses recorded by quartz OSL and feldspar IRSL (50 °C) are negligible for the luminescence dating of Pleistocene-aged deposits of ice-distal, littoral and shallow-marine origin. 相似文献
11.
A comparative study using quartz optically stimulated luminescence (OSL) and feldspar post-infrared infrared stimulated luminescence (post-IR IRSL) was undertaken on Quaternary fluvial sediments from an unnamed tributary of the Moopetsi River in South Africa. The aim is to assess whether the post-IR IRSL signal can be used to date incompletely bleached sediments. Several post-IR IRSL signals using varying stimulation and preheat temperatures were investigated; of these the post-IR IRSL225 signal was deemed most appropriate for dating because it bleached most rapidly. The feldspar post-IR IRSL225 equivalent dose (De) values from this site are consistently larger than those from quartz OSL, probably due to differences in the bleaching characteristics of the two signals. Additionally, the post-IR IRSL225 De values within a sample showed less variation in precision than the quartz De data, possibly due to greater averaging between grains in the feldspar small aliquots. The agreement between ages based on the OSL and post-IR IRSL225 signals was better for younger samples (<20 ka) than for older ones (>50 ka); the cause of this variation is unclear. 相似文献
12.
This study attempted to probe a geologically more stable IR stimulated luminescence signal (IRSL) that explored so far. IRSL, probes the proximal pairs and, pIRSL measurements at elevated temperatures consume more distant pairs. We surmised that the residual IRSL after pIR-IRSL should arise from most distant pairs and hence should be more stable. A thermal stimulation after pIR-IRSL leads to redistribution of charges including distant pairs and this can be probed by further IRSL and pIRSL (post IR IRSL) measurements. This post IRSL following a thermal treatment is termed as redistributed IRSLs (RD IRSL and RD pIRSL) and contributes about 10% of total IRSL counts from a pristine sample. As expected RD, IRSLs are poor to be solar bleachable. Burial age of around 800 ka(with 30–40 %) using RD-IRSL and RD-pIRSL were comparable with the palaeomagnetic dating and were a factor of three higher than conventional pIR-IRSL, TRL, IR-RL and VSL ages. 相似文献
13.
Luminescence dating has long been used for chronological constraints on marine sediments due to the ubiquitous dating materials (quartz and feldspar grains) and its applicability over a relatively long time range. However, one of the main difficulties in luminescence dating on marine sediments is partial bleaching, which causes age overestimations. Especially, partial bleaching is typically difficult to be detected in the fine grain fraction (FG) of marine sediments. The recently developed feldspar post-IR IRSL (pIRIR) protocol can detect non-fading signals and thus avoid feldspar signal instability. In the current study, fine grains were extracted from a gravity core in the northern Sea of Japan, and the aim is to test the feasibility of using different luminescence signals with various bleaching rates to explore the bleaching conditions of fine grain fraction in marine sediments. The results suggest that the quartz OSL signal and polymineral pIRIR signals at stimulation temperatures of 150 °C and 225 °C (pIRIR150 and pIRIR225) of FG were well bleached prior to deposition. The OSL ages were used to establish a chronology for this sedimentary core and the resulting age-depth relationship is self-consistent and comparable with radiocarbon dates. We conclude that different luminescence signals with various bleaching rates can be used to test the bleaching conditions of fine grain fraction in marine sediments; and the luminescence dating can be applied to marine sediments with great potential. 相似文献
14.
Ágnes Novothny Manfred Frechen Erzsébet Horváth Matthias Krbetschek Sumiko Tsukamoto 《Quaternary Geochronology》2010,5(2-3):114-119
Anomalous fading of the infrared stimulated luminescence (IRSL) signal from the polymineral fine-grain and K-feldspar fractions of aeolian sediments from Hungary has been studied. The samples in this study have previously been dated using the multiple aliquot additive dose (MAAD) protocol to measure the IRSL signal. The IRSL measurements using MAAD were conducted ~4 weeks after the irradiation, making it difficult to assess to what extent these age estimates were affected by anomalous fading. In this study, equivalent doses were obtained using the single aliquot regenerative dose (SAR) protocol. The fading rate for each sample was calculated using the different IRSL components and different parts of the decay curve. For each sample, the middle part of the decay curve always showed a lower fading rate than the initial part of the decay curve. The difference between the fading rates for different parts of the decay curve was greater for the K-feldspars than for the polymineral fine grains. Fading corrected ages were calculated by integrating both the initial and the middle part of the decay curve. These ages were compared with optically stimulated luminescence (OSL) ages from quartz, infrared radiofluorescence (IR-RF) ages obtained from K-feldspars and also with independent ages, provided by radiocarbon dating of shells and charcoal, and uranium-series dating of travertine. 相似文献
15.
Luminescence chronology of the upper part of the Stari Slankamen loess sequence (Vojvodina,Serbia) 总被引:1,自引:0,他引:1
E.D. Schmidt B. Machalett S.B. Marković S. Tsukamoto M. Frechen 《Quaternary Geochronology》2010,5(2-3):137-142
A thick Middle and Late Pleistocene loess-palaeosol sequence is exposed at the Stari Slankamen section in the Vojvodina region situated in the south-eastern part of the Pannonian basin, Serbia. The profile exposes an about 45 m thick series of loess intercalated by at least eight pedocomplexes. Ten samples were dated by luminescence methods using a modified single aliquot regenerative dose (SAR) protocol for polymineral fine grains and for quartz extracts from the upper part of the Stari Slankamen loess sequence. The infrared stimulated luminescence (IRSL) and post-IR optically stimulated luminescence (OSL) signals from all polymineral samples showed anomalous fading, suggesting that the post-IR OSL signal is still dominated by feldspar OSL. The ages ranging from 4.6 to 193 ka were obtained after fading correction. These ages indicate that the loess unit V-L1L1, the weakly developed soil complex V-L1S1 and the loess unit V-L1L2 were deposited during marine isotope stage (MIS) 2, 3, and 4, respectively, and also indicate that the loess unit V-L2 is of the penultimate glacial age. 相似文献
16.
Previous luminescence dating studies on loess from China and Tajikistan have focused on the establishment of the regional chronology of the loess sequences. In order to improve the precision and accuracy of optical ages derived from the loess of the last glacial period in these regions, we have examined the components of luminescence signals in three loess samples from western China and southern Tajikistan. Our results show that the polymineral IRSL and post-IR OSL, and quartz OSL signals from loess of the two regions are represented by three components, which display different bleaching and growth characteristics. While the composition of the polymineral IRSL signals is similar between samples with the same age from the two regions, in the case of quartz there is significant discrepancy in the proportion of the fast and medium components of the OSL signals. Greater difference is observed in the composition of the polymineral post-IR OSL signals for the loess from the two regions. The three components of polymineral IRSL signals yield almost identical equivalent dose values as that derived from the total IRSL signal. An apparent agreement in equivalent dose is observed between the fast component of the polymineral post-IR OSL and the quartz OSL for the loess of western China but not in the loess of the same age from southern Tajikistan. The fast component of the quartz OSL yields an equivalent dose 25% higher than that based on the total signal for the sample from the base of the Late Pleistocene loess in southern Tajikistan. This demonstrates the importance of signal selection for an accurate luminescence dating of Central Asian loess. 相似文献
17.
The paleogeography of Amazonia lowlands during the Pleistocene remains hampered by the lack of reliable absolute ages to constrain sediment deposition in the hundred thousand to few million years timescales. Optically stimulated luminescence (OSL) dating applied to quartz has provided important chronological control for late Quaternary sediments, but the method is limited to the last ∼150 ka. In order to extend the age range of luminescence dating, new signals from quartz have been investigated. This study tested the application of isothermal thermoluminescence (ITL) and thermally transferred optically stimulated luminescence (TT-OSL) signals of quartz for dating of fluvial terraces from eastern Amazonia. ITL and TT-OSL signals measured in a modern fluvial sediment sample have shown small residual doses (4 and 16 Gy), suggesting adequate bleached sediments for the target dose range (>150 Gy). This sample responded well to dose recovery test, which showed that the ITL and TT-OSL signals grow to higher doses compared to the doses estimated by the conventional OSL signal. The ITL signal saturated for doses significantly lower than doses reported in the literature. Most dating samples were beyond the ITL saturation doses and only TT-OSL signals were suitable to estimate equivalent doses. Burial ages ranging from 107 to 340 ka were estimated for the fluvial terraces in the lower Xingu River. The main ages uncertainties are related to dose rate changes through time. Despite the uncertainties, these ages should indicate a higher channel base level during the Middle Pleistocene followed by channel incision, possibly due to episodes of increased precipitation in the Xingu watershed. 相似文献
18.
When measuring samples from southern Peru, we discovered an age offset between feldspar infrared-stimulated luminescence (IRSL) and quartz optically stimulated luminescence (OSL) ages. This age offset was not only found in these particular samples but was also observed in samples from a range of geographical localities. Extensive analysis revealed that it is actually the quartz age that underestimates the true depositional age, and this is due to a very weak fast component combined with other thermally unstable OSL signal components. We discuss properties of these poorly behaving samples and how to detect such samples prior to the OSL single-aliquot regenerative-dose (SAR) measurement. Finally, existing approaches to improve equivalent dose (De) determination are discussed for samples from southern Peru. 相似文献
19.
20.
Although there has been significant advancement of OSL (optically stimulated luminescence) dating of quartz and feldspar over the past decade, the luminescence characteristics of quartz grains in many tectonically active areas are not suitable for accurate age determinations using this technique. This study investigates the reasons for this unsuitability and tests a new measurement protocol (ITL), which appears more promising. At two sites along the central Garlock fault in the Mojave Desert, California, USA, samples collected for OSL dating for this study have proven problematic. At the El Paso Peaks (EPP) trench site, a sequence of OSL samples was collected from sandy units with a well-established radiocarbon chronology, providing the opportunity to assess different approaches and optimize our luminescence dating procedures. At Christmas Canyon West (CCW), where future Garlock fault slip rate studies will be conducted using luminescence dating, samples were collected to assess the luminescence characteristics of both quartz and feldspar in this environment. At both sites, signals from quartz and K-feldspar grains are consistently dim. At EPP, quartz results provide age underestimates, while K-feldspar IRSL yields erratic values; the causes of this problematic behavior are unclear. Preliminary minimum isothermal thermoluminescence (ITL) signals of K-feldspar measured during preheating appear to be consistent with the radiocarbon age estimates, demonstrating potential for accurate age determination in this kind of environment using this protocol. 相似文献