Feldspar multi-elevated-temperature post-IR IRSL dating of the Wulanmulun Paleolithic site and its implication

The Wulanmulun site found in 2010 is an important Paleolithic site in Ordos (China), from which lots of stone and bone artifacts and mammalian fossils have been recovered. It was previously dated by radiocarbon and optically stimulated luminescence (OSL) techniques on quartz. To further confirm the reliability of the chronology constructed based on OSL ages and test the applicability of the recently developed pIRIR procedure on sediments from northern China, twenty-four sediment samples (including eolian, lacustrine and fluvio-eolian sands) from the site were determined using the multi-elevated-temperature post-IR IRSL (MET-pIRIR or pIRIR) procedure on potassium feldspar. The results show that the studied samples have two MET-pIRIR D_e preheat plateaus (280–320 and 340–360 °C), and the bleaching rates of the luminescence signals are associated with sample ages and stimulation temperatures. All the pIRIR ages (7–155 ka) corrected for anomalous fading and residual dose obtained after solar bleaching for 15 h are larger than the corresponding quartz OSL ages (4–66 ka) previously determined, even for the young eolian samples (<10 ka). But the corrected IRSL(50 °C) ages (6–85 ka) are broadly consistent with the quartz ages. It appears that the IRSL(50 °C) ages are more reliable, although this contradicts the previously results obtained by other people. On the other hand, we also obtained an extended age plateau between the stimulation temperatures of 50 and 290 °C in the plot of age versus stimulation temperature (A-T plot) by subtracting different residual doses obtained after different bleaching times. The reliability of the plateau ages requires further investigation. For the sediment samples from this site, quartz should be more suitable for dating than K-feldspar, and the quartz OSL ages of 50–65 ka for its cultural layer should be reliable.     

Multiple approaches to date Japanese marker tephras using optical and ESR methods

The present study aimed to test reliability of luminescence and electron spin resonance (ESR) methods to date tephra. We investigated on three Japanese marker tephras, Ikeda-ko (6.4 ka), Aira-Tn (30 ka) and Aira-Iwato (45–50 ka). A systematic studies were performed using different minerals (quartz and feldspar), different grain fractions (75–250 and 250–500 μm), different luminescence and ESR signals, like optically stimulated luminescence (OSL) of quartz, infrared stimulated luminescence (IRSL) of feldspar, including recently developed least faded post infrared IRSL (pIR-IRSL), and ESR signals from paramagnetic centers Al and Ti–Li of quartz. Ages obtained using pIR-IRSL signal of plagioclase with preheat of 320 °C, 60 s and stimulation at 300 °C are consistent with the reference ages. High dose detection range (up to ∼600 Gy) and accurate age estimation enable pIR-IRSL of feldspar a promising methodology to date quaternary tephra. ESR ages from quartz are grossly correlated with the reference ages but large deviation and large associated errors are observed, possibly due to either low signal to noise ratio or heterogenous dose response of different aliquot in multiple aliquot additive dose (MAAD) approach.     

Luminescence dating of marine sediments from the Sea of Japan using quartz OSL and polymineral pIRIR signals of fine grains

Luminescence dating has long been used for chronological constraints on marine sediments due to the ubiquitous dating materials (quartz and feldspar grains) and its applicability over a relatively long time range. However, one of the main difficulties in luminescence dating on marine sediments is partial bleaching, which causes age overestimations. Especially, partial bleaching is typically difficult to be detected in the fine grain fraction (FG) of marine sediments. The recently developed feldspar post-IR IRSL (pIRIR) protocol can detect non-fading signals and thus avoid feldspar signal instability. In the current study, fine grains were extracted from a gravity core in the northern Sea of Japan, and the aim is to test the feasibility of using different luminescence signals with various bleaching rates to explore the bleaching conditions of fine grain fraction in marine sediments. The results suggest that the quartz OSL signal and polymineral pIRIR signals at stimulation temperatures of 150 °C and 225 °C (pIRIR₁₅₀ and pIRIR₂₂₅) of FG were well bleached prior to deposition. The OSL ages were used to establish a chronology for this sedimentary core and the resulting age-depth relationship is self-consistent and comparable with radiocarbon dates. We conclude that different luminescence signals with various bleaching rates can be used to test the bleaching conditions of fine grain fraction in marine sediments; and the luminescence dating can be applied to marine sediments with great potential.     

Maximum age limitation in luminescence dating of Chinese loess using the multiple-aliquot MET-pIRIR signals from K-feldspar

Numerical dating of loess is important for Quaternary studies. Recent progress in post-infrared infrared-stimulated luminescence (pIRIR) signals from potassium-rich feldspar has allowed successful dating of Chinese loess beyond the conventional dating limit based on quartz optically stimulated luminescence (OSL) signals. In this study we tested the multiple-aliquot regenerative-dose (MAR) pre-dose multiple-elevated-temperature post-IR IRSL (pMET-pIRIR) procedure on samples from the palaeosol S5 (∼480 ka) and S8 (∼780 ka) layers from the Luochuan and Jingbian sections, respectively. The results show that (1) compared to sensitivity-corrected signal (L_x/T_x), a higher saturation dose is observed for the sensitivity-uncorrected MET-pIRIR signals (L_x), suggesting that MAR is advantageous for dating old samples; (2) negligible fading component can be achieved using the pMET-pIRIR procedure; (3) for the sample from the top of palaeosol S5, D_e values (1360 + 226/-167 Gy) broadly consistent with expected D_e (1550 ± 72 Gy) can be obtained using the sensitivity-uncorrected 300 °C MET-pIRIR signal. Our study suggests that a D_e value of about 1800 Gy may be the maximum dating limit of Chinese loess using the MAR pMET-pIRIR procedure.     

Luminescence chronology of fossiliferous fluvial sediments along the middle Atbara River,Sudan

Fluvial sediments of the middle Atbara River Valley, eastern Sudan, contain abundant vertebrate fossils and stone tools. Previous work described two sedimentary units, the Butana Bridge Synthem (BBS) and the Khashm El Girba Synthem (KGS), with three divisions each (BBS1-3 and KGS1-3, from bottom to top, respectively). ²³⁰Th/U dating on bivalve shells suggested an age of ∼126 and ∼92 ka for the basal KGS2 and basal KGS3, respectively, and mammalian biochronology in combination with magnetostratigraphy suggested an age of late Early to early Middle Pleistocene for the underlying BBS. To establish a detailed chronology of this fluvial sedimentary sequence, we collected 17 luminescence samples from both sides of the Atbara River close to the Butana Bridge. Quartz OSL dating was applied to samples from the upper part of the profile (upper KGS2 and KGS3), but the signal reached saturation within the upper ∼10 m of the sequence. To select a suitable feldspar signal to date older samples beyond the limit of the quartz OSL, a comparison of the quartz OSL, feldspar post-IR IRSL at 225 and 290 °C, and pulsed IRSL signal at 50 °C was conducted for a sample from KGS3. The result showed that only the fading corrected pulsed IRSL yielded an age consistent with the quartz OSL, and the post-IR IRSL signals (both at 225 and 290 °C) overestimated the quartz age significantly. We therefore selected the pulsed IRSL signal to date the older deposits. The luminescence ages indicate that the entire BBS - KGS sequence was deposited between 224 ± 23 ka and <17 ± 1 ka, corresponding to marine isotope stages (MIS) 7–2, significantly revising previous conclusions.     

High resolution OSL and post-IR IRSL dating of the last interglacial–glacial cycle at the Sanbahuo loess site (northeastern China)

Northeastern China is located in the East Asian monsoon region; it is sensitive to both high and low latitude global climate systems. Loess deposits in the region have considerable potential as sensitive archives of past climate changes. However, research into loess deposition and climate change in this region is restricted by the lack of independent age control. In this study, coarse-grained quartz SAR OSL and K-feldspar post-IR infrared (IR) stimulated luminescence (post-IR IRSL; pIRIR₂₉₀) methods have been used to date the Sanbahuo loess site in northeastern China. The quartz OSL characteristics are satisfactory. The measured pIRIR₂₉₀ D_e's do not vary significantly with IR stimulation temperatures between 50 °C and 260 °C; a first IR stimulation temperature of 200 °C was adopted. Dose recovery tests were performed by adding different laboratory doses to both laboratory bleached (300 h SOL2) samples and natural samples; the results are satisfactory up to ∼800 Gy. Resulting quartz OSL and feldspar pIRIR₂₉₀ ages are in good agreement at least back to ∼44 ka; beyond this feldspar pIRIR₂₉₀ ages are older. The feldspar ages are consistent with the expected age of the S1 palaeosol (MIS 5). There appears to have been a period of fast loess deposition at ∼62 ka, perhaps indicative of winter monsoon intensification with a very cold and dry climate that lead to a serious desertification of dunefields in northeastern China.     

Exploring IRSL50 fading variability in bedrock feldspars and implications for OSL thermochronometry

Optically Stimulated Luminescence (OSL) is a well-established Quaternary dating method, which has recently been adapted to application in low-temperature thermochronometry. The Infra-Red Stimulated Luminescence (IRSL) of feldspar, which so far is the most promising target signal in thermochronometry, is unfortunately prone to anomalous fading. The fading of feldspar IRSL is at times not only challenging to measure, but also laborious to incorporate within luminescence growth models. Quantification of IRSL fading is therefore a crucial step in OSL thermochronometry, raising questions regarding (i) reproducibility and reliability of laboratory measurements of fading, as well as (ii) the applicability of existing fading models to quantitatively predict the level of IRSL field saturation in nature. Here we investigate the natural luminescence signal and anomalous fading of IRSL measured at 50 °C (IRSL₅₀) in 32 bedrock samples collected from a variety of lithologies and exhumation settings (Alaska and Norway). We report a large span of IRSL₅₀ fading rates between samples (g_2days ranging from ∼0.5 to ∼45%/decade), which further demonstrates (i) a good reproducibility between two common fading measurement protocols, and (ii) the ability of tunnelling models to predict the level of feldspar IRSL₅₀ field saturation in nature. We observe higher IRSL₅₀ fading in feldspar with increasing Ca content, although other factors cannot be dismissed at present. Finally, our dataset confirms that the applicability of feldspar IRSL₅₀ in OSL thermochronometry is limited to rapidly-exhuming settings or warm subsurface environments.     

Luminescence dating of K-feldspar from sediments: A protocol without anomalous fading correction

A protocol for optical dating of potassium-rich feldspar (K-feldspar) is proposed. It utilizes the infrared stimulated luminescence (IRSL) signal measured by progressively increasing the stimulation temperature from 50 to 250 °C in step of 50 °C, so-called multi-elevated-temperature post-IR IRSL (MET-pIRIR) measurements. Negligible anomalous fading was observed for the MET-pIRIR signals obtained at 200 and 250 °C. This was supported by equivalent dose (D_e) measurements using the IRSL and MET-pIRIR signals. The D_e values increase progressively from 50 °C to 200 °C, but similar D_e values were obtained for the MET-pIRIR signal at 200 and 250 °C. Measurement of modern samples and bleached samples indicates that the MET-pIRIR signals have small residual doses less than 5 Gy equivalent to about 1–2 ka. We have tested the protocol using various sedimentary samples with different ages from different regions of China. The MET-pIR IRSL ages obtained at 200 and 250 °C are consistent with independent and/or quartz OSL ages.     

Luminescence dating of Holocene sediment cores from a wave-dominated and mountainous river delta in central Vietnam

Sediments of river deltas provide valuable records of past coastal environments. Optically-stimulated luminescence (OSL) dating has become an alternative to radiocarbon dating for constraining the sediment chronology in large deltas that allow for sufficient sunlight bleaching of sediments during the fluvial transport. However, its applicability to smaller deltas with mountainous riverine systems has not been confirmed yet. To check this, we examine multiple signals from two Holocene sediment cores in the wave-dominated Thu Bon River delta in central Vietnam. Two cores were collected, respectively, 3.9 km and 1.2 km inland from the present shoreline and both show a >-25-m thick succession of coarsening-upward mud to sand deposits. Coarse grains (180–250 μm in diameter) of quartz and K-feldspar, and fine grains (4–11 μm in diameter) of quartz and polymineral were extracted from the upper and lower parts of the cores for multi-grain measurements of quartz OSL, and of feldspar infrared-stimulated luminescence (IRSL) at 50 °C (IR₅₀) and post-IR IRSL at 175 °C (pIRIR₁₇₅) to determine burial ages. In addition, facies analysis and radiocarbon dating were conducted. The landward core consists of transgressive to early regressive estuarine and prodelta facies, which is overlain by a sandy beach-shoreface facies. The seaward core consists of a relatively simple shallowing-upward succession from muddy prodelta facies to sandy beach-shoreface facies. All luminescence ages except for pIRIR₁₇₅ of fine grains are mostly consistent with the radiocarbon ages. Instead, pIRIR₁₇₅ ages of fine grains are significantly overestimated with variable offsets. OSL and IR₅₀ of fine grains provide reasonable age estimates, as these grains were likely well bleached during the transport even along a short and steep mountainous river. Consistent age estimates of all signals from sand indicate that sand was well-bleached in the beach and shoreface owing to the frequent sediment reworking by waves and currents. These results support the hypothesis that luminescence dating is applicable to Holocene wave-dominated deltas and reiterate that comparing different luminescence signals is an effective way to check reliability of the age estimates in environments where the sunlight bleaching is not ensured.     

Comparison of paired quartz OSL and feldspar post-IR IRSL dose distributions in poorly bleached fluvial sediments from South Africa

A comparative study using quartz optically stimulated luminescence (OSL) and feldspar post-infrared infrared stimulated luminescence (post-IR IRSL) was undertaken on Quaternary fluvial sediments from an unnamed tributary of the Moopetsi River in South Africa. The aim is to assess whether the post-IR IRSL signal can be used to date incompletely bleached sediments. Several post-IR IRSL signals using varying stimulation and preheat temperatures were investigated; of these the post-IR IRSL₂₂₅ signal was deemed most appropriate for dating because it bleached most rapidly. The feldspar post-IR IRSL₂₂₅ equivalent dose (D_e) values from this site are consistently larger than those from quartz OSL, probably due to differences in the bleaching characteristics of the two signals. Additionally, the post-IR IRSL₂₂₅ D_e values within a sample showed less variation in precision than the quartz D_e data, possibly due to greater averaging between grains in the feldspar small aliquots. The agreement between ages based on the OSL and post-IR IRSL₂₂₅ signals was better for younger samples (<20 ka) than for older ones (>50 ka); the cause of this variation is unclear.     

Testing the application of quartz and feldspar luminescence dating to MIS 5 Japanese marine deposits

The applicability of both quartz and feldspar luminescence dating was tested on twenty-five samples from a marine succession now forming a coastal cliff at Oga Peninsula, Honshu Island, Japan. The quartz optically stimulated luminescence (OSL) signal shows thermal instability and linear modulated (LM)-OSL analysis revealed the dominance of a slow component. When compared with independent age control provided by two marker tephras, the quartz OSL ages grossly underestimate the depositional age. In contrast, potassium (K)-rich feldspar is a suitable dosimeter when measured using post-IR infrared stimulated luminescence (IRSL) at 225 °C (pIRIR₂₂₅). Scanning electron microscope (SEM) analyses on the feldspar extracts revealed that the grains are amorphous with small crystalline inclusions; using standard internal dose rate parameters, this would result in a too large dose rate. Dose rates were calculated using the observed grain size of 40 ± 20 μm with an assumed K concentration of 12.5 ± 0.5%. The fading corrected pIRIR₂₂₅ ages agree well with independent age control, and the sediments of the Katanishi Formation were deposited between 82 ± 6 and 170 ± 16 ka. This study demonstrates that pIRIR dating of feldspar is a powerful chronological tool for the dating of sediments of volcanic origin.     

Testing the potential of elevated temperature post-IR IRSL signals for dating Romanian loess

In this study we test the potential of the elevated temperature infrared stimulated luminescence (IRSL) signals for dating Romanian loess. The recently developed post-IR IRSL protocol is applied to Romanian loess using polymineral fine grains extracted from the loess-palaeosol sequence at Mircea Vodă (SE Romania). This approach is aimed at obtaining an additional age control to examine the age discrepancy obtained from previous optically stimulated luminescence (OSL) studies using different grain-sizes of quartz (4–11 μm and 63–90 μm).Two preheat post-IR IR stimulation temperature combinations were used, 250–225 °C and 325–300 °C, respectively. The signals obtained are documented in terms of dose response curve, laboratory tests and fading. Although both post-IR IRSL signals exhibit small fading rates, dose response characteristics indicate that these rates may be laboratory artefacts. The post-IR IRSL signal stimulated at 300 °C is observed to suffer from dose dependent initial sensitivity changes as both natural and regenerated signals are observed to lie above the saturation level of the dose response curve. Uncorrected age results obtained using both post-IR IRSL signals are in general agreement with previously reported silt-sized quartz OSL ages for samples collected from the uppermost loess unit L1. For older material, the post-IR IRSL signal stimulated at 225 °C is considered to provide reliable age results, in agreement with independent age control available for this sequence.     

Dating the recent past (<500 years) by post-IR IRSL feldspar – Examples from the North Sea and Baltic Sea coast

The applicability of the post-IR IRSL single-aliquot regenerative-dose protocol (termed pIRIR protocol) has been tested on K-rich feldspar from recent coastal sediment samples (<500 a) from the southern North Sea coast and southern Baltic Sea coast. The most suitable post-IR IRSL (pIRIR) stimulation temperature is found to be 150 °C by using a preheat temperature of 180 °C. For this pIRIR stimulation temperature, a detectable pIRIR signal is obtained and the residual dose is minimized. Furthermore, anomalous fading is found to be negligible in the pIRIR₁₅₀ signal for our young samples whereas the fading rates for the conventional IRSL signal measured at 50 °C (IRSL₅₀) is between 5 and 7%/decade. However, the pIRIR₁₅₀ signal bleaches significantly slower compared to the IRSL_50, according to bleaching experiments using daylight, solar simulator and IR diodes, although the residual doses of both signals are similar. The laboratory residual doses in perfectly bleached aliquots are variable from sample to sample and vary between 300 ± 170 and 800 ± 460 mGy for the pIRIR₁₅₀. The precision of the residual dose determination is generally poor and causes large uncertainties on the residual subtracted ages. The laboratory residual doses alone cannot account for the observed overestimation in our two youngest samples (<70 a), indicating that the feldspar signals in these samples were presumably not fully bleached prior to aeolian or beach deposition. However, even if the age uncertainties are large we obtained pIRIR₁₅₀ ages in agreement with independent age estimates for the two older samples, which are 70 and 390 years old.     

Luminescence dating of fluvial deposits in Vojvodina,N Serbia: First results

This paper reports on the first investigations into the potential of luminescence dating to establish a chronological framework for fluvial processes in the Tisa River Valley in Vojvodina, N Serbia. A total of 18 samples were collected from a terrace exposure near Mužlja, which comprised non-fluvial deposits at the top and fluvial deposits at the base. The luminescence characteristics of sand-sized quartz and potassium feldspar grains were investigated using a single-aliquot regenerative dose (SAR) protocol. The quartz separates exhibit a complex behaviour, making this dosimeter less suited for optical dating. Investigations into the behaviour of infrared stimulated luminescence (IRSL) measured at 50 °C (IR₅₀) from K-rich feldspar extracts showed that preheating in excess of 60 s at 225 °C leads to significant sensitivity changes. The effect of IR stimulation on the thermoluminescence (TL) signal and that of preheating on IRSL intensity were examined; the results are inconclusive with respect to thermal stability, but are not inconsistent with the idea that the data do not reflect depletion of an electron trap. The IR₅₀-signal measured after a preheat of 60 s at 115 °C behaves well in the SAR protocol, although it suffers from anomalous fading. Assuming that the signal is thermally stable, the fading-corrected ages suggest that deposition occurred during the end of the Late Pleniglacial and the early Late Glacial, which is consistent with geological expectations. Our observations demonstrate that IRSL dating of feldspar holds potential for establishing a chronology of fluvial dynamics of the Tisa River in N Serbia. Further methodological investigations are desirable; however, as issues relating to the stability and resetting of the IRSL signal remain to be resolved.     

Bleachability of pIRIR signal from single-grain K-feldspar

The high-temperature (e.g., >200 °C) post-infrared infrared (pIRIR) stimulated luminescence of feldspar has been widely used for dating, because it usually suffers negligibly from anomalous fading. However, compared to the quartz optically stimulated luminescence (OSL) or low-temperature (e.g., 50 °C) IR stimulated luminescence (IRSL) from feldspars, the high-temperature pIRIR signals have been shown to bleach more slowly and usually have high residual does of a few Gys or more, which limits its application to date relatively young samples and may cause problems for correcting residual dose/signal. In this study, we investigated the bleachability of K-feldspar pIRIR signals for individual grains. A significant variation in the bleachability of the pIRIR signal was observed among different K-feldspar grains from the same sample. Experiments show that such a variability may result in different residual doses for different grains and, consequently, additional scatter in D_e values. We present a method for quickly testing the bleachability of individual grains. Our result suggests that selecting the easy-to-bleach grains for D_e determination provides an efficient way to date young samples using high-temperature pIRIR signals, which avoids the compromise of using low-temperature pIRIR signals that may suffer from anomalous fading.     

Establishing a luminescence chronology for a palaeosol-loess profile at Tokaj (Hungary): A comparison of quartz OSL and polymineral IRSL signals

We present a comparative study of quartz OSL, polymineral IRSL at low temperature (50 °C, IR₅₀) and post-IR elevated temperature (290 °C) IRSL (pIRIR₂₉₀) feldspar dating on nine samples from the Tokaj loess section in NE Hungary (SE Europe). Preheat plateau tests show a drop in quartz OSL D_e between 160 and 240 °C but above 240 °C a clear D_e plateau is present. Quartz OSL SAR is shown to be generally appropriate to these samples (recycling, recuperation) but a satisfactory dose recovery result was only obtained when a dose was added to a sample without any prior optical or thermal pre-treatment; this gave a dose recovery ratio of 1.04 ± 0.05 after subtracting the natural dose from the measured dose. The pIRIR₂₉₀ SAR protocol also results in acceptable dose recovery results for the pIRIR₂₉₀ signal (1.08 ± 0.01) when a large dose is added to the natural dose. Bleaching experiments suggest a detectable non-bleachable residual pIRIR₂₉₀ dose of 10 ± 4 Gy. Agreement with quartz OSL ages is best achieved by correcting the IR₅₀ ages for fading; however this is not necessary when using the pIRIR₂₉₀ signal. With respect to Hungarian Late Quaternary geology our results indicate that the major part of the Tokaj loess has been deposited during MIS 3 (60–24 ka), with periods of soil formation occurring during the onset of MIS 3 (≥58 ka) and between about 35 and 25 ka. Our results also indicate episodic deposition of loess and varying, non-linear sedimentation rates during MIS 3. Proxy analyses in the literature are based on the traditional concept of continuous deposition; in the light of our new data the use of such simple assumptions must be reconsidered.     

MET-post-IR IRSL luminescence dating of cobbles buried in fluvial terraces in the Northern Chinese Tian Shan

Cobbles can be used as an alternative to the conventionally employed sand-sized mineral luminescence dating. In piedmont environments, cobbles are much more abundant than sand-sized material. The IRSL₅₀ signal has been widely used in previous studies due to its greater sensitivity to exposure events. However, it is well known that the low temperature IRSL signal is more prone to fade than elevated temperature post-IR IRSL signal. In this study, to test the reliability and applicability of cobble sub-surface elevated temperature IRSL luminescence dating, six light-color granite cobbles and two sand-sized samples from silty sand lens were collected from a high terrace of Manas River on the northern piedmont of Chinese Tian Shan. A modified multi-elevated-temperature post-infrared infrared stimulated luminescence (MET-post-IR IRSL) protocol was applied. The age-temperature (A-T) plateau of MET-post-IR IRSL measurement was combined with the conventional age-depth (A-D) plateau in luminescence-depth profile to evaluate the resetting and fading of MET-post-IR IRSL signals. Uncertainties of grain-sizes of K-feldspar within solidified slices were also explored by μ-XRF mapping of potassium content. The A-T plateau was identified between MET-post-IR IRSL₁₇₀ and MET-post-IR IRSL₂₂₅ signals of one cobble, which suggested completeness of bleaching before burial and negligible anomalous fading during burial. This cobble yielded MET-post-IR IRSL₂₂₅ ages of 15.8 ± 2.6 ka and 19.0 ± 3.2 ka for top and bottom side, respectively. These MET-post-IR IRSL₂₂₅ ages were consistent with independent coarse-grained quartz MAM OSL ages (15.7 ± 3.6 ka and 14.8 ± 2.6 ka) of two sand-sized samples. The MET-post-IR IRSL₂₂₅ age of 16.0 ± 1.2 ka for the bottom side of another cobble was also consistent with the independent age, even without the A-T plateau. It was inferred to be caused by anomalous fading of MET-post-IR IRSL signals other than that stimulated at 225 °C by refering to the A-D plateau observed. Our results show that MET-post-IR IRSL measurement can be employed to determine the burial ages of cobbles. The A-T plateau, complemented with the A-D plateau, could be used to assess the reliability of burial ages of cobble luminescence dating from the view of bleaching and fading.     

Luminescence dating of scoria fall and lahar deposits from Somma–Vesuvius,Italy

Luminescence dating has been applied to scoria and lahar deposits from Somma–Vesuvius, Italy. Samples include scoria from the AD472 and 512 (or 536) eruptions and lahar deposits. In order to find a stable luminescence signal which is less affected by anomalous fading, infrared stimulated luminescence (IRSL) signals at elevated temperatures after bleaching with IR at 50 °C (termed post-IR IRSL; pIRIR) were tested at different preheat and elevated stimulation temperatures. The fading rates of both IRSL and pIRIR signals reduced dramatically with increasing preheat and pIRIR stimulation temperatures. A pIRIR signal measured at 290 °C after a preheat at 320 °C (60 s) and an IR stimulation at 50 °C (100 s) was selected to calculate the equivalent dose (D_e). The gamma spectrometry results indicate that the U-series nuclides are not in equilibrium and there is a large ²²⁶Ra excess. The dose rates and ages were calculated by assuming a ²²⁶Ra excess (over its parent ²³⁰Th) at deposition, and that this unsupported excess then decayed to the present level. The resulting luminescence ages of the two scoria samples agreed with the expected ages, and the ages of the lahar deposits indicate that they are associated with the AD1631 eruption.     

A comparison of TT-OSL and post-IR IRSL dating of coastal deposits on Cap Bon peninsula,north-eastern Tunisia

In this study thermally transferred (TT) OSL and post-IR elevated temperature IRSL (290 °C) (pIRIR₂₉₀) dating are applied to deposits covering coastal terraces on the Cap Bon peninsula, Tunisia. Both methods perform well under standard performance tests; dose recovery tests using a modern analogue show that doses relevant to our study can be recovered accurately. Residual signals in the modern analogue for both signals are very small (∼2 Gy). For the younger (<250 ka) deposits reasonable good agreement of the ages is observed between both methods, and in addition with standard quartz OSL dating. Systematic discrepancy in ages is found for the older sediments. The TT-OSL underestimate (compared to the pIRIR₂₉₀ ages) is most likely due to the short lifetime of the TT-OSL trap; we estimate a lifetime of ∼0.7 Ma at 19 °C (mean ambient air temperature of the study area). This is the first time this lifetime has been derived from geological data and it is within the range of previously published laboratory estimates. This result suggests that TT-OSL is not likely to provide a significant extension of the age range beyond that available from other methods. Our preferred pIRIR₂₉₀ ages suggest that the geological setting on Cap Bon is not as simple as previously suggested.     

Violet stimulated luminescence as an alternative for dating complex colluvial sediments in the Atacama Desert

Luminescence dating has become a key tool in studies of the Quaternary. The typically stable luminescence response of quartz grains and the absence of a significant internal dose, make quartz minerals the preferred dosimeter for monitoring the burial dose in sediments. Unfortunately, the reliability of conventional OSL (optically stimulated luminescence) dating, based on blue stimulation, can be compromised when the luminescence decay is not dominated by a rapidly decaying and stable part of the luminescence signal (i.e. the fast component). On the other hand, standard methods in luminescence dating are limited to ages of a few hundred kiloyears. In this study, violet stimulated luminescence (VSL) has been used as a means to overcome both problems, applied to a series of colluvial deposits in the Atacama Desert, Chile. Quartz from this region, characterized by poor blue-OSL response, showed a reproducible and stable VSL signal capable of recovering given doses up to ∼500 Gy and a saturation dose twice as high as conventional OSL. The VSL response from these samples has been studied in detail and the estimated ages have been compared with an already established chronology for the same site, based on IRSL of potassium feldspar single grains. Results agree for the dose range of the profile studied, ∼100–250 Gy, equivalent to ages of 29–79 ka confirming the suitability of VSL for dating sedimentary quartz with unreliable blue-OSL response and to extend the age range of conventional OSL dating.