Resetting of sediments mobilised by the LGM ice-sheet in southern Norway

Former geological field investigations in the Rondane area, east-central southern Norway, have proposed that the maximum Fennoscandian ice-sheet coverage occurred during the Late Weichselian Glacial Maximum (LGM, ca. 20 ka) and that subsequent glaciofluvial sediments were first deposited in the early Holocene (after 10 ka). However, recent field investigations with ages from three internally consistent quartz optically stimulated luminescence (OSL) age series show an apparent deglaciation of northern Rondane in the period 20.0–13.8 ka. We examine here the possibility that these ages are too old because the sediment was not completely zeroed prior to deposition. Our investigations of incomplete bleaching use modern analogues, small aliquots, and single grains of quartz. First, the symmetric shape of small aliquot equivalent dose distributions suggests that the sediment was probably well bleached at deposition. This is supported by 5 modern analogue equivalent doses (D_e) of 0.6 Gy, 1.5% of the typical D_e from the deglaciation sediments. Finally, from single grain studies on three samples, we conclude that there is no evidence for poor bleaching in these samples; thus the weighted mean gives the best estimates of D_e, and these are completely consistent with both large and small aliquot estimates for these samples. These comparisons between large aliquots, modern analogues, small aliquots and single-grain analyses help to validate the OSL ages and confirm the complete resetting of these sediments prior to deposition.     

Optically stimulated luminescence dating of young (<500 years old) sediments: Testing estimates of burial dose

The reliability of single-grain optically stimulated luminescence (OSL) dating of young (<500 years old) samples is assessed by examining the results of 166 single-grain OSL analyses of Australian alluvial, lacustrine, estuarine, coastal and marine sediment samples. All samples have been analysed using the modified SAR protocol of Olley et al. [2004b. Optical dating of Holocene sediments from a variety of geomorphic settings using single grains of quartz. Geomorphology 60, 337–358], with burial doses (D_b) calculated by fitting a single Gaussian curve to the peak of a multi-Gaussian summed probability distribution (PDF_Gaussian). The near-equivalence of this approach to currently accepted methods of palaeodose estimation – namely the minimum age and central age models of Galbraith et al. [1999. Optical dating of single and multiple grains of quartz from Jinmium rock shelter, northern Australia: part I, experimental design and statistical models. Archaeometry 41, 339–364] – is demonstrated. Considered as a whole, OSL ages calculated using the PDF_Gaussian D_b determination method are consistent with other chronometric, geomorphological, botanical and historical indicators of depositional age, while four alternative (previously published) methods are generally less reliable when applied to the samples analysed here. The single-grain data from 12 samples of known age (reported by Olley et al. [2004b. Optical dating of Holocene sediments from a variety of geomorphic settings using single grains of quartz. Geomorphology 60, 337–358]) are re-analysed using the PDF_Gaussian approach, with all but one yielding a D_b consistent with the independently known age. Examples of luminescence data (dose recovery tests, preheat plateaux, continuous-wave and linear-modulated OSL, growth curves, single-grain dose distributions) are provided that together indicate the suitability of Australian quartz for dating young sediments.     

OSL dating of loess deposits bracketing Sheep Creek tephra beds,northwest Canada: Dim and problematic single-grain OSL characteristics and their effect on multi-grain age estimates

Geochemically-fingerprinted tephra beds provide unique chronostratigraphic markers for comparing Quaternary sedimentary records across eastern Beringia (Alaska and Yukon Territory). Establishing reliable numerical age control on these tephra horizons enables them to be placed within firm temporal frameworks and increases their potential as correlative tools for regional palaeoenvironmental reconstructions. To this end we present new single-grain and multi-grain quartz optically stimulated luminescence (OSL) chronologies for loess deposits bracketing three well-documented and regionally significant variants of the Sheep Creek tephra (SCt) at two sites in west-central Yukon Territory (Ash Bend and Quartz Creek). Single-grain OSL ages bracketing the SCt-A and SCt-K reveal that these tephras were deposited during late Marine Isotope Stage (MIS) 5 or early MIS 4. The SCt-C variant and associated organic-rich bed at Ash Bend were likely deposited during late MIS 5, based on a single-grain OSL age of ∼81 ka for the overlying sediments. The single-grain OSL ages obtained for these deposits are in stratigraphic order and in broad agreement with a fission track age estimate of ∼77 ka for the SCt-K. In contrast, comparative chronologies obtained using multi-grain aliquots are stratigraphically inconsistent and unexpectedly young when compared with the independent SCt-K age. Detailed examination of the single-grain OSL datasets reveal a range of unfavourable luminescent properties that could have contributed to the multi-grain aliquot age discrepancies; including, very low yields of luminescent grains, weak OSL signal sensitivities and large populations of aberrant grains (particularly 0 Gy grains and ‘dim’ grains with a tendency to sensitise during the equivalent dose (D_e) measurement sequence) that have similarly sized OSL signals as grains used for D_e analysis. Synthetic aliquot D_e datasets constructed from single-grain OSL measurements reveal that the large proportional light sum contributions of 0 Gy and dim grains could possibly account for multi-grain age underestimations in some of the Ash Bend samples. In light of these potentially problematic averaging effects, we do not consider the multi-grain OSL ages to be reliable and suggest that single-grain approaches may be preferable for dating sediments with similar quartz luminescence behaviours across this region.     

Luminescence dating of the late Quaternary sediments in Hangzhou Bay,China

Coastal plain of Hangzhou Bay, to the south of the present Yangtze Estuary, is closely linked to the evolution of the Yangtze River delta. However, absolute age of Pre-Holocene sediments is limited, which hinders the understanding of this area's environmental evolution. In this study, using optically stimulated luminescence (OSL), single aliquots and single grains of quartz and K-feldspar were used to date the late Quaternary sediments in coastal plain on the southern Hangzhou Bay. The vertical difference in particle size composition render either silt- or sand-sized quartz for dating. Cross-checking of multiple OSL dating methods indicated that the upper ∼65 m recorded the Holocene part of the succession; sediment from a depth of 136.6 m was dated to ∼180 ka. It was found that the single-grain method was more reliable in comparison to single-aliquot age, the former minimized the effect of signal components. Single-grain quartz and K-feldspar luminescence yielded consistent ages at sample depth of 136.6 m (∼160–180 ka), while the latter gave robust age at depth of 115.5 m (∼150 ka). This chronology is in general in accordance with neighbouring cores and can constrain paleomagnetic dating results in those cores. Taking together, the study site has thickest Holocene deposits in comparison to the highland centered around Taihu Lake on the southern Yangtze delta. Moreover, the luminescence characteristics of quartz from different sample depths, behaved differently with respect to luminescence sensitivity, signal components and saturation level, perhaps reflecting varied provenance and weathering characteristics caused by climate change.     

Optical dating of aeolian and fluvial sediments in north Tian Shan range,China: Luminescence characteristics and methodological aspects

Loess and fluvial sand are important materials for dating river terraces and alluvial fans. This study focuses on the methodological aspects of dating loess and fluvial deposits from the northern flank of the Tian Shan range, China, using sand-sized quartz and potassium (K) feldspar. Luminescence characteristics of quartz and K-feldspar were studied for searching suitable dating procedures. Our results indicate that 1) most quartz aliquots were contaminated by feldspar, and were dated using a post-infrared optically stimulated luminescence (post-IR OSL) procedure. A Fast ratio acceptance threshold of 15 can be applied to select these aliquots with post-IR OSL signals dominated by quartz OSL; 2) the multi-elevated-temperature post-IR IR stimulated luminescence (MET-pIRIR) procedures are applicable for K-feldspar. A test dose of ∼30% of the natural dose is appropriate for dating of older (>10 ka) samples. An Age (T, t) plateau test can be used to evaluate the dating results; 3) for the loess samples, both quartz and K-feldspar were well bleached and are suitable for dating. Dating using K-feldspar is preferred for its higher efficiency; 4) for the fluvial sand samples, only the quartz grains were fully bleached. Single-aliquot dating of quartz gives reliable ages.     

Luminescence dating of quartz from ironstones of the Xingu River,Eastern Amazonia

This study reports on the first investigation into the potential of quartz luminescence dating to establish formation ages of ferruginous duricrust deposits (ironstones) of the Xingu River in Eastern Amazonia, Brazil. The studied ironstones comprise sand and gravel cemented by goethite (FeO(OH)), occurring as sandstones and conglomerates in the riverbed of the Xingu River, a major tributary of the Amazon River. The Xingu ironstones have a cavernous morphology and give origin to particular habitat for benthic biota in an area that hosts the largest rapids in Amazonia. So far, the Xingu ironstones have uncertain formation ages and their sedimentary origin is still poorly understood. In this way, seven samples of ironstones distributed along the lower Xingu River were collected for optically stimulated luminescence (OSL) dating of their detrital quartz sand grains. Additionally, the organic content of some samples was dated by radiocarbon (¹⁴C) for comparison with quartz OSL ages. The luminescence ages of the sand-sized quartz grains extracted from the ironstones were obtained from medium (100–300 grains) and small (10–20 grains) aliquots using the single aliquot regenerative-dose (SAR) protocol. Equivalent doses (D_e) distributions have varied overdispersion (OD) both for medium size aliquots (OD = 19–58 %) and small size aliquots (OD = 29–76 %). No significant trend was observed between D_e and aliquot size. The studied ironstones grow over the riverbed, but stay below or above water throughout the year due to the seasonal water level variation of the Xingu River. However, the effect of water saturation in dose rates is reduced due to relatively low porosity of ironstones. Water saturated dose rates (dry sample dose rates) range from 2.70 ± 0.21 (2.79 ± 0.22) Gy/ka to 12.34 ± 0.97 (13.26 ± 1.12) Gy/ka, which are relatively high when compared to values reported for Brazilian sandy sediments elsewhere (∼1 Gy/ka). Samples with high overdispersion (>40 %) are mainly attributed to mixing of grains trapped in different time periods by goethite cementation. The obtained OSL ages for water saturated (dry) samples range from 3.4 ± 0.3 (3.3 ± 0.4) ka to 59.6 ± 6.0 (58.1 ± 6.4) ka, using D_e determined from medium size aliquots and dose response curves fitted by an exponential plus linear function. Radiocarbon ages of the bulk organic matter extracted from selected ironstone varied from ca. 4 cal ka BP to ca. 23 cal ka BP. Significant differences were observed between OSL and radiocarbon ages, suggesting asynchronous trapping of organic matter and detrital quartz within the ironstone matrix. These late Pleistocene to Holocene ages indicate that ironstones of the Xingu River result from an active surface geochemical system able to precipitate goethite and cement detrital sediments under transport. The obtained ages and differences between OSL and radiocarbon ages point out that the ironstones have multiphase and spatially heterogeneous growth across the Xingu riverbed. Our results also expand the application of luminescence dating to different sedimentary deposits.     

RESIDUAL POST-IR IRSL SIGNALS OF POTASSIUM FELDSPAR FROM MODERN SAG POND DEPOSITS OF CENTRAL ALTYN TAGH FAULT: IMPLICATION FOR DATING YOUNG PALEOSEISMIC EVENTS

The Altyn Tagh Fault(ATF)is one of the most prominent active strike-slip faults in the India-Eurasia collision. Fresh features of surface ruptures, which are attributed to seismic events taking place in the last millennium, are identified at several sites along the Che'erchen River to Qingshui River section on the central part of ATF. Accurate chronology of these earthquake events would help understand the spatial-temporal relationship of the recent earthquakes. However, great difficulties are encountered. The central ATF is located in the arid area, and the vegetation cover is so limited that rare organic materials appropriate for radiocarbon dating can be found in the sediments. Luminescence dating technique may serve as an alternative to directly determine the burial ages of the earthquake related sediments. The optically stimulated luminescence(OSL)signal of quartz, which has been widely employed for luminescence dating, displays unwanted charateristics for accurate dating. Firstly, the quartz OSL signal is not sensitive to irradiation, which leads to low signal-to-noise ratio or even no measurable quartz OSL signal. Secondly, the targeted samples of the last millennium are very young, and the radiation dose received during the burial is expected to be less than 3~4Gy, which futher deteriorates the signal-to-noise ratio of the quartz OSL signal. Therefore, quartz OSL signal is not appropriate for dating the sediments relevant to the recent earthquakes on ATF.
The infrared stimulated luminescence(IRSL)signal of potassium feldspar is an alternative, and it is in usual an order of maginitude more sensitive to raidation than the quartz OSL signal. The enhanced signal-to-noise ratio makes it applicable to young samples. The post-IR IRSL signal has been successfully applied to date the sediments beyond the Holocene, however, the relatively slow bleaching of the post-IR IRSL signal poses challenges on applying it to young sediments, especially for the sediments deposited during the last millennium. In this study, we investigated the feasibility of using post-IR IRSL signal from potassium feldspar to date the earthquake events of the last millennium by employing modern sag pond deposits with different sorting and expected equivalent dose(D_e)of 0Gy. Choosing an appropriate measurement procedure and identifying the well bleached pottassium feldspar grains are essential for post-IR IRSL dating of young sediments. The non-fading characteristic of the post-IR IRSL₁₇₀ signal measured at 170℃ following a prior IR stimulation at 110℃ was verified by employing the D_e plateau test with respect to the signal integration interval and IR stimulation temperature together. Reducing the amount of potassium feldspar grains mounted on an aliquot would help reveal the among grains variation of bleaching level of post-IR IRSL₁₇₀ signal before depostion and identify the most sufficiently bleached grains. Therefore, the post-IR IRSL₁₇₀ D_e values of 2mm aliquots were measured for three samples with different sedimentary textures. The median of D_e distribution of well sorted and stratified sag pond deposits is consistent with the minimum D_e value inferred from the minimum age model(MAM-3) and finite mixture model(FMM), while for the poorly sorted deposits, the median is significantly overestimated compared with the minimum D_e values from the MAM-3 and the FMM. The minimum D_e values of 0.6~0.8Gy of all three samples are consistent with the unbleachable residual dose previously reported for post-IR IRSL signals measured at similar temperature for well bleached samples. It implies that by combined use of small aliquot and statistical age models, the well-bleached potassium feldspar grains could be identified. Such an intrinsic unbleachable component needs to be properly corrected when earthquake events of last millennium are to be dated in this area. Otherwise, the post-IR IRSL₁₇₀ age would be overestimated by 200~300a.
The post-IR IRSL₁₇₀ procedure investigated in this study is not only applicable for dating the paleoearthquake events along the Altyn Tagh Fault, but also with great potential to be applied to other tectonically active area. With consideration of the potential variability in post-IR IRSL signal characteristics of potassium feldspar grains from different origins, the signal stability needs to be routinely inspected. The modern analog sample would also be informative for justifying the measurement procedure and analytical method employed.     

Radiocarbon and luminescence dating of the Wulanmulun site in Ordos,and its implication for the chronology of Paleolithic sites in China

After the Salawusu and Shuidonggou sites, the Wulanmulun site found in 2011 is another important Paleolithic site in Ordos, China, due to its numerous stone artifacts and animal fossils. Here, we carry out a combined luminescence and radiocarbon dating of the site. The luminescence dating was done on coarse-grained quartz from 24 sediment samples using a single-aliquot regenerative-dose (SAR) protocol. The radiocarbon dating was performed on ten charcoal samples and one bone sample using acid-base-acid (ABA) and acid–base-wet oxidation-stepped combustion (ABOx-SC) pretreatments. The results showed that: (i) although some samples show relative large (>20%) overdispersion in De distribution (small aliquots), the quartz grains are considered to be sufficiently bleached before burial; (ii) the quartz OSL ages of ∼4–65 ka obtained for the samples are generally stratigraphically consistent and reliable; (iii) the radiocarbon ages obtained using the ABA pretreatment procedure are much younger than the corresponding OSL ages, and the radiocarbon ages obtained using the ABOx-SC method are beyond or close to the laboratory background. The radiocarbon ages obtained using the ABA treatment were considered to be underestimated. This implication is that caution must be taken for dating Chinese Paleolithic (>25 ka) using the ABA pretreatment procedure on carbon samples. Finally, the cultural layers from the Wulanmulun site are deduced to be between 50 and 65 ka.     

Developments in optically stimulated luminescence age control for geoarchaeological sediments and hearths in western New South Wales,Australia

Research conducted by the Western New South Wales Archaeology Program (WNSWAP) provides the opportunity to assess the reliability of optically stimulated luminescence (OSL) dating of late Pleistocene and Holocene fluvial sediments and burnt stone samples from arid zone geoarchaeological contexts. A large number of radiocarbon age determinations of charcoal preserved in heat retainer hearths provides independent chronological control at these contexts. We describe a rapid OSL methodology for dating burnt hearth stones to complement previously applied radiocarbon methods, which we have tested using 37 samples from hearths with radiocarbon determinations. We propose a geoarchaeological model in which these hearths were constructed by people whose activity took place on an archaeological surface, formed by the earlier deposition of fluvial sediments. Here we demonstrate the veracity of this model by dating sediments lying stratigraphically below the hearths, and use the radiocarbon age control and chronological consistency to assess the accuracy and reliability of both small aliquot and single grain single aliquot regenerative-dose (SAR) OSL dating. While small aliquot age estimates are in most cases in agreement with independent control, the single grain determinations using a finite mixture model (FMM) appear to provide improved chronological resolution. Using single grains, we note some problems in the application of the FMM and in the dating of young samples in the range of 1–100 years. As many samples may have resided close to the surface since deposition, we have developed a mathematical function to describe gamma and cosmic dose rate contributions at burial depths down to 40 cm. These OSL age estimates allow us to reject the model of intensification of human activity as responsible for the observed pattern of archaeological radiocarbon determinations in this part of the Australian arid zone.     

ESR dating of sedimentary quartz: Possibilities and limitations of the single-grain approach

Usually, multiple-grain aliquots are used for electron spin resonance (ESR) dating of sediments. However, this approach excludes the ability of detecting insufficient bleaching, as would be the case when measuring several single aliquots or single grains. In this paper, we present preliminary results of single-grain ESR dating experiments on three different sedimentary deposits (fluvial, fluvio-aeolian and desert aeolian), ranging in age between 100 ka and 2 Ma. Titanium-related impurity centres (Ti–Li and Ti–H) were measured in a Q-band ESR spectrometer for estimating equivalent doses (D_e) of individual quartz grains (0.5–1 mm). Both additive and regenerative dose methods were used. The resulting D_e plots show a large scatter in D_e—from 100 Gy to more than 600 Gy—for the fluvial sample, probably reflecting different bleaching histories of the grains. On the contrary, a clear plateau can be observed in D_e for sands with a strong aeolian component. Preliminary single-grain ESR ages are in relatively good agreement with independent estimates, the best results being obtained for the desert aeolian sample (200 ka). It is concluded that ESR has a promising potential for estimating large naturally accumulated doses of well-bleached sediments. Nevertheless, the method is challenged by several experimental difficulties, such as long measurement times, excessive errors, and presumably a complex interrelationship between Ti–Li and Ti–H components.     

Single-grain dating of young sediments using the pIRIR signal from feldspar

In this article we test for the first time the potential of single-grains of K-rich feldspar to date well-bleached and poorly bleached sediments using a post-IR IRSL (pIRIR) protocol. We measure natural dose distributions using K-rich feldspars from four coastal samples applying the pIRIR protocol with a preheat of 200 °C and a pIRIR stimulation temperature of 180 °C; each sample had an independent age control obtained from quartz OSL and radiocarbon dating. We also analyse single-grain dose distributions of “zero-dose” and γ-irradiated samples to determine thermal transfer/residual doses and the intrinsic sources of variability of pIRIR single-grain measurements, respectively. Based on these experiments, we conclude that thermal transfer/residual dose give rise to an offset of ∼0.6 Gy in these samples and that the uncertainty assigned to individual pIRIR single-grain dose estimates cannot be smaller than 16.5%.The analysis of the well-bleached samples shows that only the brightest 30% of the grains give pIRIR single-grain ages in agreement with the age control; this effect may arise from the suggested correlation between blue emission and potassium content of individual grains. Comparison of single-grain quartz and feldspar dose distributions from the poorly bleached samples shows that quartz is relatively better bleached; nevertheless, selection of a reliable ‘minimum’ feldspar dose was achieved using two different statistical models.     

Application of OSL dating to middle to late Holocene arroyo sediments in Kanab Creek,southern Utah,USA

Middle to late Holocene alluvium, identified as Quaternary alluvial unit 4 (Qa4), along Kanab Creek in southern Utah, USA was dated using optically stimulated luminescence (OSL) on quartz sand, and by radiocarbon dating of detrital charcoal. Entrenchment beginning in 1882 AD created arroyo walls that expose up to 35 m of the Qa4 alluvium. The stratigraphy and sedimentology suggest that fluvial aggradation along the study reach occurred rapidly. Due to the high sediment supply, short transport distances and semi-arid climate with flashy discharge, partial bleaching (zeroing) of the luminescence signal was expected to be a problem for OSL dating. We approached this problem by first using small-aliquot (∼20 grains) and single-grain dating of quartz sand to reduce the number of grains contributing to the OSL signal. Second, we used statistical parameters based on single-grain and small-aliquot equivalent dose (De) distributions of bleached sediment to help identify partial bleaching and to inform if a minimum age model (MAM) should be used for age calculation. Comparison of results with radiocarbon ages demonstrates the success of OSL dating on Kanab Creek arroyo-fill deposits, although careful attention should be paid to the sedimentary facies and stratigraphy of the targeted sample horizon to minimize the effects of partial bleaching. Thin, decimeter-scale plane-bedded and ripple cross-bedded sandy lithofacies were found to be the best target for OSL dating, as these sediments showed minimal evidence for incomplete solar resetting. Additionally, results generally indicate that better-bleached sediments are found in downstream reaches. Age control from these arroyo-fill deposits was acquired in order to fulfill larger research goals of understanding regional arroyo incision and aggradation cycles.     

Chronology of an oyster reef on the coast of Bohai Bay, China: Constraints from optical dating using different luminescence signals from fine quartz and polymineral fine grains of coastal sediments

Fossil oyster reefs are indicators of past sea levels, and their formation is usually dated by means of radiocarbon. However, radiocarbon dating of the shells from coastal areas may be complicated by the varying sources of carbon. Here we applied optical dating methods to date the samples from above and below a fossil oyster bed in a section on the coast of Bohai Bay, China. The optical ages of the sediments were used to constrain the oyster bed. Single-aliquot regenerative-dose procedures using the OSL signal from fine grain quartz, the IRSL and post-IR OSL signals from polymineral fine grains were employed to determine equivalent dose (D_e). The behaviors of the different luminescence signals from quartz and polymineral grains during D_e measurements were examined. The results showed that the quartz OSL signal is more reliable than the polymineral IRSL and post-IR OSL signals with respect to dating for these coastal samples. The optical ages indicated that the oyster reef formed between ca. 6.2 and 5.0 ka.     

Detecting post-depositional sediment disturbance in sandy deposits using optical luminescence

Post-depositional mixing or exhumation is common in surficial sediments, yet may be unobservable from field evidence. However, any disturbance may have significant consquences in terms of establishing a reliable luminescence age determination. Optically stimulated luminescence (OSL) measurements, particularly measurements at the single grain level, can be used to gain an insight into both contemporary and past post-depositional processes.

This paper examines sites from Texas and Florida (USA) with independent chronological control to demonstrate the potential effects of varying degrees of bioturbation on OSL. Results show that contemporary soil forming processes clearly impact on the palaeodose (D_e) replicate distributions which are measured in order to derive an OSL age. Significant levels of scatter and apparently zero dose grains are observed in the upper-most sediments; declining with depth from the surface. D_e replicates from undisturbed and fully bleached sediments are unskewed, show low overdispersion (OD) and comparable single grain and single aliquot OSL ages. Bioturbated sediments, however, may show highly skewed multi-model D_e distributions with higher OD values, zero dose grains at depth, and significant diffences between single grain and single aliquot results. True burial ages may be derived from minimally bioturbated sediments through the application of statistical analysis such as finite mixture modelling to isolate D_e components. However, for significantly bioturbated sediments, the latter approach, even at the single grain level, produces inaccurate ages. In such cases we argue that additional evidence (both dating and contexual) may be required to identify with confidence the burial D_e population.     

Infrared stimulated luminescence and radiofluorescence dating of aeolian sediments from Hungary

Anomalous fading of the infrared stimulated luminescence (IRSL) signal from the polymineral fine-grain and K-feldspar fractions of aeolian sediments from Hungary has been studied. The samples in this study have previously been dated using the multiple aliquot additive dose (MAAD) protocol to measure the IRSL signal. The IRSL measurements using MAAD were conducted ～4 weeks after the irradiation, making it difficult to assess to what extent these age estimates were affected by anomalous fading. In this study, equivalent doses were obtained using the single aliquot regenerative dose (SAR) protocol. The fading rate for each sample was calculated using the different IRSL components and different parts of the decay curve. For each sample, the middle part of the decay curve always showed a lower fading rate than the initial part of the decay curve. The difference between the fading rates for different parts of the decay curve was greater for the K-feldspars than for the polymineral fine grains. Fading corrected ages were calculated by integrating both the initial and the middle part of the decay curve. These ages were compared with optically stimulated luminescence (OSL) ages from quartz, infrared radiofluorescence (IR-RF) ages obtained from K-feldspars and also with independent ages, provided by radiocarbon dating of shells and charcoal, and uranium-series dating of travertine.     

A Bayesian hierarchical age model for optical dating of single grains of quartz

In optical dating, the last time that a sample of sediment was exposed to sunlight is determined by dividing its equivalent dose (D_e) by the dose rate. For single-grain dating, the sample D_e is based on the statistical analysis of the distribution of D_e values estimated for individual grains, whereas the dose rate is usually determined from measurements of the environmental radioactivity of the bulk sample, together with allowances for radiation sources internal to the grains and cosmic rays. Conventionally, the D_e and dose rate are measured and analysed separately to produce an estimate of the depositional age of a sample, but this approach may result in loss of information because distributions of single-grain D_e values are influenced by several factors. Existing statistical models do not incorporate all the key information contributing to age estimation, such as the pattern and scale of dispersion of single-grain D_e values and dose rates, the associated measurement uncertainties, the effect of natural variability among grains, and the outlier probabilities of D_e and dose rate estimates. Here we propose an empirical Bayesian hierarchical age model (BHAM) for optical dating of quartz samples that incorporates the above information to estimate their depositional ages. The BHAM is based on the implementation of standardised growth curve and L_nT_n methods to integrate information on the full distribution of single-grain D_e values, sources of measurement uncertainty, beta-dose heterogeneity (observed or modelled), and detection of outliers. We present the results of validation tests using data sets of optically stimulated luminescence measurements and dose rates obtained for quartz samples dated previously from Denisova Cave (Russia) and for simulated samples. We conclude that the BHAM represents a robust and flexible approach to dealing with data for single grains of quartz within a Bayesian hierarchical framework and is suitable for application to sediments deposited in a variety of depositional settings.     

Testing single-grain quartz OSL methods using sediment samples with independent age control from the Bordes-Fitte rockshelter (Roches d'Abilly site,Central France)

We present quartz single-grain dose distributions for four well-bleached and unmixed sediment samples with independent age control (22–48 ka), from the archaeologically important Bordes-Fitte rockshelter at Roches d'Abilly, France. This site has previously been dated using ¹⁴C AMS dating and standard multi-grain OSL dating using both quartz and feldspar. The effect of rejection criteria usually employed in single-grain dating on dose and over-dispersion is tested using both laboratory irradiated samples and natural samples. It is shown that had these samples been analysed in the absence of other age control, standard modelling decisions based on the shape of single-grain dose distributions would have led to significant misinterpretation of results and a corresponding >40% underestimation in age. If we instead ignore this standard decision process and apply weighted average and mixing models then the most likely results deviate from the expected ages by >10%. Finally, we show that by careful consideration of the luminescence characteristics of individual grains, we are able to obtain good agreement with the independent age control by applying alternative rejection criteria but this is at the cost of reducing the accepted grain population by more than an order of magnitude, with the corresponding inevitable decrease in precision.     

Stochastic modelling of multi-grain equivalent dose (De) distributions: Implications for OSL dating of sediment mixtures

A number of recent optically stimulated luminescence (OSL) studies have cited post-depositional mixing as a dominant source of equivalent dose (D_e) scatter across a range of sedimentary environments, including those previously considered ‘best suited’ for OSL dating. The potentially insidious nature of sediment mixing means that this problem may often only be identifiable by careful statistical analysis of D_e data sets. This study aims to address some of the important issues associated with the characterisation and statistical treatment of mixed D_e distributions at the multi-grain scale of analysis, using simulated D_e data sets produced with a simple stochastic model. Using this Monte Carlo approach we were able to generate theoretical distributions of single-grain D_e values, which were then randomly mixed together to simulate multi-grain aliquot D_e distributions containing a known number of mixing components and known corresponding burial doses. A range of sensitivity tests were undertaken using sediment mixtures with different aged dose components, different numbers of mixing components, and different types of dose component distributions (fully bleached, heterogeneously bleached and significantly overdispersed D_e distributions). The results of our modelling simulations reveal the inherent problems encountered when dating mixed sedimentary samples with multi-grain D_e estimation techniques. ‘Phantom’ dose components (i.e. discrete dose populations that do not correspond to the original single-grain mixing components) are an inevitable consequence of the ‘averaging’ effects of multi-grain D_e analysis, and prevent the correct number of mixing components being identified with the finite mixture model (FMM) for all of the multi-grain mixtures tested. Our findings caution against use of the FMM for multi-grain aliquot D_e data sets, even when the aliquots consist of only a few grains.     

Luminescence dating of an Upper Pleistocene alluvial fan and aeolian sandsheet complex: The Senne in the Münsterland Embayment,NW Germany

An up to 15 m thick alluvial fan and aeolian sandsheet complex is exposed in the upper Senne area, on the southern slope of the Teutoburger Wald Mountains (NW Germany). The origin and age of these deposits have been controversially discussed for many years, ranging from Saalian glaciofluvial to periglacial Weichselian deposits. In order to provide a high-resolution chronological framework for the deposits, we conducted luminescence dating of 12 samples from two localities (Oerlinghausen and Augustdorf pits). Both coarse-grain potassium-rich feldspar and quartz minerals were used for luminescence dating. Feldspar was measured using an elevated temperature post-IR infrared stimulated luminescence (IRSL). Quartz was measured using optically stimulated luminescence (OSL) with a conventional single aliquot regenerative dose (SAR) protocol. Feldspar results tend to overestimate quartz ages for the lower part of the sections (alluvial plain and alluvial fan facies) but are consistent with quartz ages for the upper part of the sections (aeolian facies). Quartz ages from both central and minimum age models suggest deposition during the Late Pleistocene Pleniglacial to Late Glacial.     

Optical dating of tidal sediments: Potentials and limits inferred from the North Sea coast

The accuracy of optical ages derived from tidal sediments depends largely upon the transport processes. These processes constrain the degree of bleaching by the time of deposition and the choice of grain size for dating. This study looks at flow regime, sediment bedding, particle size and suspended sediment concentration (SSC) over tidal flats in order to identify the tidal sub-environment from which reliable multigrain optical ages are most likely to be achieved. The resulting conceptual model is then compared with empirical OSL data obtained from Holocene sediments of the southern North Sea tidal coastal plain of continental Europe. Optical dating of the tidal sediments included single-aliquot-regenerative dose protocol applied to multigrain aliquots of fine sand and fine silt, statistical analysis using weighted skewness, standardised kurtosis and over-dispersion. It is inferred from the model that smaller grains should be better bleached than larger grains. However, because transport and deposition processes are extremely variable in both space and time, unequivocal “bleaching rules” could not be assigned to a particular tidal sub-environment. In this context more than 85% of our samples return accurate ages and around 13% of our optical ages are overestimated when compared with ages from established well-constrained stratigraphic frameworks. The empirical study confirms the concept of “variable bleaching rules”: both accurate and inaccurate ages are obtained from silty and sandy OSL samples regardless of the sub-environment and well-bleached samples may be obtained from all tidal sub-environments. Although our study is based on multiple-grain aliquots it also shows that an independent statistical treatment of equivalent dose data is an indispensable procedure to detect and correct for insufficient bleaching.