共查询到20条相似文献,搜索用时 296 毫秒
1.
In close-range photogrammetry, 3D information acquisition is based on image matching. The application of code marker helps
to improve the level of automatic matching and the matching accuracy. This paper investigates the application of inertia ellipse
algorithm to code marker matching. We can calculate the inertia ellipse of a target with a certain boundary. First, the method
is applied to a single code marker; the angle and scaling are valid. Then, the paper introduces the multi code markers matching
method by the inertia ellipse. Rotation and scaling changes of homonymy images can be calculated by inertia ellipse algorithm.
These parameters can be used for code marker matching in arbitrary attitude close-range photogrammetry. 相似文献
2.
圆形标志已广泛应用于近景摄影测量,但由于影像平面与目标平面不能完全平行,所以圆形标志的数字影像一般为椭圆。如果圆形标志点较大,以至于圆形标志中心与其椭圆构像中心的偏差不可忽略。故本文从摄影测量共线条件方程式出发,采用一种基于最小二乘的椭圆拟合算法,推导出偏差计算公式,本文的真正目的在于分析偏差分布规律及偏差间的关系,尽可能降低偏差的影响。 相似文献
3.
4.
针对数字近景立体摄影测量中立体影像的高效自动匹配的需要,提出一种基于数字视差模型(digital parallax model,DPM)和改进SIFT(scale invariable feature transformation)特征的立体影像匹配算法。该算法首先根据近景立体摄影系统中相机基距和相互关系固定的特点,利用已知的标定数据,构建立体影像的数字视差模型,并计算立体影像中的同名核线参数,再在DPM和核线的约束下,确定右影像上同名像点的搜索范围,以提高匹配速度和准确性;其次,利用SIFT特征和灰度特征,设计结合局部结构信息和全局灰度信息的匹配相似性测度计算模型,以增强匹配的稳健性。利用该算法对实际立体影像进行实验,结果表明本文方法可大大消减错误匹配,提高匹配的可靠性和精度。 相似文献
5.
6.
7.
为探究不同测量方法获取浅沟数据的精度,本文以元谋干热河谷区浅沟为例,采用RTK、三维激光扫描、近景摄影测量等多种测量方法获取浅沟数据,建立DEM并提取浅沟形态参数,对比近景摄影测量以不同方式获取标记坐标后建立DEM的差异,同时以测针板实测浅沟横剖面为参照,对比分析不同测量方法获取浅沟横剖面的精度。结果表明:RTK获取密度较低的点数据,建立的DEM较粗糙,仅体现沟缘大致走向;近景摄影测量+RTK方法测得的DEM高程整体低于近景摄影测量+全站仪所得DEM高程;利用三维激光扫描仪和近景摄影测量+全站仪两种方法获取数据所提取的浅沟形态参数精度较高;对比浅沟横剖面,横剖面近景摄影测量+全站仪测量所得与实测横剖面重合度较高。因此,利用近景摄影测量+全站仪进行浅沟测量,在精度、效率等方面优势较大。 相似文献
8.
9.
10.
一种简易近景无加密立体测量方式的研究 总被引:1,自引:0,他引:1
分析了一种简易的近景无加密立体测量方式的基本原理,硬件集成方式,软件设计方式,并对试验结果进行分析.该方式是一种近景摄影测量方式,采用正直摄影方法获取影像,用电子经纬仪获取相关角度信息. 相似文献
11.
12.
13.
14.
本文研究的无控制数字近景摄影测量系统是集GPS、电子经纬仪、数码相机和个人数字助理(PDA)等硬件设备于一身,辅以数据处理中心,形成的一种快速的目标三维、纹理和属性信息获取的新型测量系统。该系统是对传统地面摄影测量作业方式的一次提升,是对国内地面(近景)摄影测量领域一体化仪器的补充。 相似文献
15.
Feng Wenhao 《地球空间信息科学学报》2013,16(3):50-56
Close-range photogrammetry is to determine the shape and size of the object, instead of it's absolute position. Therefore, at first, any translation and rotation of the photogrammetric model of the object caused by whole geodesic, photographic and photogrammetric procedures in close-range photogrammetry could not be considered. However, it is necessary to analyze all the reasons which cause the deformations of the shape and size and to present their corresponding theories and equations. This situation, of course, is very different from the conventional topophotogrammetry. In this paper some specific characters of limit errors in close-range photogrammetry are presented in detail, including limit errors for calibration of interior elements for close-range cameras, the limit errors of relative and absolute orientations in close-range cameras, the limit errors of relative and absolute orientations in close-range photogrammetric procedures, and the limit errors of control works in close-range photogrammetry. A theoretical equation of calibration accuracy for close-range camerais given. Relating to the three examples in this paper, their theoretical accuracy requirement of interior elements of camera change in the scope of ±(0.005–0.350) mm. This discussion permits us to reduce accuracy requirement in calibration for an object with small relief, but the camera platform is located in violent vibration environment. Another theoretical equation of relative RMS of base lines (mS/S) and the equation RMS of start direction are also presented. It is proved that themS/S could be equal to the relative RMS ofmΔX/ΔX. It is also proved that the permitting RMS of start direction is much bigger than the traditionally used one. Some useful equations of limit errors in close-range photogrammetry are presented as well. Suggestions mentioned above are perhaps beneficial for increasing efficiency, for reducing production cost. 相似文献
16.
一种直线特征标志的子像素定位方法 总被引:1,自引:0,他引:1
在近景摄影测量中,常常需要对直线特征的标志进行定位,而标志定位的精度会影响到整个测量的精度。不同特征的控制点标志,对应不同的识别方法,因此控制点标志的选择须根据不同的要求,进行综合研究分析。本文提出一种新的混合方法,首先采用Hough变换对直线特征标志进行直线检测,得到直线初值;然后采用灰度矩边缘直线拟合定位法,对标志点中心进行子像素定位。通过实验证明:经过Hough变换得到粗值的灰度矩边缘直线拟合定位法达到较高的定位精度,证明了该混合方法的有效性。 相似文献
17.
针对三角形约束下影像匹配方法的实际应用,分析了所采用的数据结构与Delaunay三角网动态更新,提出了一种高效的实现算法,实际应用验证了其实现的有效性。 相似文献
18.
19.