Depositional processes of impactites from the YAX-1 drill core in the Chicxulub impact structure inferred from vertical profiles of PDF orientations and grain size distributions of shocked quartz

Core samples from the Chicxulub impact structure provide insights into the formation processes of a shallow-marine-target, complex crater. Although previous studies investigated the impactites (generally suevitic and polymict breccias) of the Yaxcopoil-1 (YAX-1) drill core in the Chicxulub impact structure, the interpretation of its deposition remains controversial. Here, we analyze planar deformation features (PDFs), grain size, and abundance of shocked quartz throughout the YAX-1 impactite sequence (794–895 m in depth). PDF orientations of most quartz grains in YAX-1 impactites show a distribution of both low angles ({104}, {103}, {102}) and high angles (orientations higher than 55° to c-axis), while the lower part of the impactite sequence contains quartz showing only PDF orientations of low angles. High-abundance, coarse-grained shocked quartz is found from the lower to middle parts of the impactites, whereas it abruptly changes to low-abundance, fine-grained shocked quartz within the upper part. In the uppermost part of the impactites, repeated oscillations in contents of these two components are observed. PDF orientation pattern suggests most of the shocked quartz grains experienced a range of shock pressure, except two samples in the lower part of impactites, which experienced only a high level of shock. We suggest that the base and lower part of the impactite sequence were formed by ejecta curtain and melt surge deposits, respectively. Our results are also consistent with the interpretation that the middle part of the impactite sequence is fallback ejecta from the impact plume. Additionally, we support the contention that massive seawater resurges into the crater occurred during the deposition of the upper and uppermost part of the impactites.     

PDF orientations in shocked quartz grains around the Chicxulub crater

Abstract— We measured 852 sets of planar deformation features (PDFs) in shocked quartz grains in impactite samples of the Yaxcopoil (YAX‐1) core and from 4 Cretaceous/Tertiary (K/T) boundary deposits: the Monaca, the Cacarajícara, and the Peñalver formations in Cuba, and DSDP site 536, within 800 km of the Chicxulub crater, in order to investigate variations of PDF orientations in the proximity of the crater. Orientations of PDFs show a broad distribution with peaks at ω {101¯3}, π {101¯2}, and ω {111¯2}, plus r, z {1011¯} orientations with minor c(0001), s{112¯1}, t{224¯1} plus x{516¯1}, and m{101¯0} plus a{112¯0} orientations. Planar deformation features with c(0001) orientation are relatively more abundant in the proximity of the Chicxulub crater than in distal sites such as North America, the Pacific Ocean, and Europe. This feature indicates that in the proximity of the crater, part of the shocked quartz grains in the K/T boundary deposits were derived from the low shock pressure zones. Moreover, the orientations of PDFs with ω {112¯2} plus r, z {101¯1} are high in our studied sites, and frequencies of these orientations decrease with increasing distance from the crater. On the other hand, absence of c(0001) and the rare occurrence of PDFs with ?ω {112¯2} plus r, z {101¯1} orientations in the sample from the YAX‐1 core that was taken at the top of the impactite layer of the Chicxulub crater suggests that the sampling horizon that reflects a certain cratering stage is also an important factor for variations in shocked quartz.     

Petrography and geochemistry of target rocks and impactites from the Ilyinets Crater,Ukraine

Abstract— The ～400 Ma old Ilyinets impact structure was formed in the Precambrian basement of the Ukrainian Shield and is now mostly covered by Quaternary sediments. Various impact breccias and melts are exposed in its southern section. The crater is a complex structure with a central uplift that is surrounded by an annular deposit of breccias and melt rocks. In the annulus, brecciated basement rocks are overlain by up to 80 m of glass-poor suevitic breccia, which is overlain (and partly intercalated) by glass-rich suevite with a thickness of up to 130 m. Impact-melt rocks occur within and on top of the suevites—in some cases in the form of devitrified bomb-shaped impact-glass fragments. We have studied the petrographic and geochemical characteristics of 31, mostly shocked, target rock samples (granites, gneisses, and one amphibolite) obtained from drill cores within the structure, and impact breccias and melt rock samples from drill cores and surface exposures. Multiple sets of planar deformation features (PDFs) are common in quartz, potassium feldspar, and plagioclase of the shocked target rocks. The breccias comprise more or less devitrified impact melt with shocked clasts. The impact-melt rocks (“bombs”) show abundant vesicles and, in some cases, glass is still present as brownish patches and schlieren. All impact breccias (including the melt rocks) are strongly altered and have significantly elevated K contents and lower Na contents than the target rocks. The alteration could have occurred in an impact-induced hydrothermal system. The bomb-shaped melt rocks have lower Mg and Ca contents than other rock types at the crater. Compared to target rocks, only minor enrichments of siderophile element contents (e.g., Ni, Co, Ir) in impact-melt rocks were found.     

Impactites of the Haughton impact structure,Devon Island,Canadian High Arctic

Abstract— Contrary to the previous interpretation of a single allochthonous impactite lithology, combined field, optical, and analytical scanning electron microscopy (SEM) studies have revealed the presence of a series of impactites at the Haughton impact structure. In the crater interior, there is a consistent upward sequence from parautochthonous target rocks overlain by parautochthonous lithic (monomict) breccias, through allochthonous lithic (polymict) breccia, into pale grey allochthonous impact melt breccias. The groundmass of the pale grey impact melt breccias consists of microcrystalline calcite, silicate impact melt glass, and anhydrite. Analytical data and microtextures indicate that these phases represent a series of impact‐generated melts that were molten at the time of, and following, deposition. Impact melt glass clasts are present in approximately half of the samples studied. Consideration of the groundmass phases and impact glass clasts reveal that impactites of the crater interior contain shock‐melted sedimentary material from depths of >920 to <1880 m in the pre‐impact target sequence. Two principal impactites have been recognized in the near‐surface crater rim region of Haughton. Pale yellow‐brown allochthonous impact melt breccias and megablocks are overlain by pale grey allochthonous impact melt breccias. The former are derived from depths of >200 to <760 m and are interpreted as remnants of the continuous ejecta blanket. The pale grey impact melt breccias, although similar to the impact melt breccias of the crater interior, are more carbonate‐rich and do not appear to have incorporated clasts from the crystalline basement. Thus, the spatial distribution of the crater‐fill impactites at Haughton, the stratigraphic succession from target rocks to allochthonous impactites, the recognition of large volumes of impact melt breccias, and their probable original volume are all analogous to characteristics of coherent impact melt layers in comparatively sized structures formed in crystalline targets.     

Shocked quartz grains in the polymict breccia of the Granby structure,Sweden–‐Verification of an impact

Abstract— The Middle Ordovician Granby structure in Sweden is generally considered the result of an asteroidal or cometary collision with Earth, although no hard evidence, i.e., shock metamorphic features or traces of the impactor, have been presented to date. In this study, drill core samples of a sedimentary breccia from the Granby structure have been investigated for microscopic shock metamorphic evidence in an attempt to verify the impact genesis of the structure. The finding of multiple sets of decorated planar deformation features (PDFs) in quartz grains in these samples provides unambiguous evidence that the structure is impact derived. Furthermore, the orientation of the PDFs, e.g., ω {101 }, π {101 } and r, z {101 }, is characteristic for impact deformation. The fact that a majority of the PDFs are decorated implies a water‐bearing target. The shocked quartz grains can be divided into two groups; rounded grains found in the breccia matrix likely originated from mature sandstone, and angular grains in fragments from crystalline target rocks. The absence of melt particles provides an estimated maximum shock pressure for the sedimentary derived quartz of 15–20 GPa and the frequency distribution of PDF orientations in the bedrock quartz implies pressures of the order of 10 GPa.     

The evolution of the Onaping Formation at the Sudbury impact structure

Abstract– The 1.4–1.6 km thick Onaping Formation consists of a complex series of breccias and “melt bodies” lying above the Sudbury Igneous Complex (SIC) at the Sudbury impact structure. Based on the presence of shocked lithic clasts and various “glassy” phases, the Onaping has been described as a “suevitic” breccia, with an origin, at least in part, as fallback material. Recent mapping and a redefined stratigraphy have emphasized similarities and differences in its various vitric phases, both as clast types and discrete intrusive bodies. The nature of the Onaping and that of other “suevitic” breccias overlying impact melt sheets is reviewed. The relative thickness, internal stratigraphic and lithological character, and the relative chronology of depositional units indicate multiple processes were involved over some time in the formation of the Onaping. The Sudbury structure formed in a foreland basin and water played an essential role in the evolution of the Onaping, as indicated by a major hydrothermal system generated during its formation. Taken together, observations and interpretations of the Onaping suggest a working hypothesis for the origin of the Onaping that includes not only impact but also the interaction of sea water with the impact melt, resulting in repeated explosive interactions involving proto‐SIC materials and mixing with pre‐existing lithologies. This is complicated by additional brecciation events due to the intrusion of proto‐SIC materials into the evolving and thickening Onaping. Fragmentation mechanisms changed as the system evolved and involved vesiculation in the formation of the upper two‐thirds of the Onaping.     

Impact melt rocks from the Late Paleocene Hiawatha impact structure,northwest Greenland

Impact melt rocks formed during hypervelocity impact events are ideal for studying impact structures. Here, we describe impact melt rock samples collected proximal to the 31 km wide 58 Ma Hiawatha impact structure, northwest Greenland, which is completely covered by the Greenland Ice Sheet. The melt rocks contain diagnostic shock indicators (e.g., planar deformation features [PDF] in quartz and shocked zircon) and form three groups based on melt textures and chemistry: (i) hypocrystalline, (ii) glassy, and (iii) carbonate-based melt rocks. The exposed foreland directly in front of the structure consists of metasedimentary successions and igneous plutons; however, the carbonate-based impactites indicate a mixed target sequence with a significant carbonate-rich component. Well-preserved organic material in some melt rocks indicates that North Greenland at the time of impact was host to abundant organic material, likely a dense high-latitude temperate forest. Geochemical signatures of platinum-group elements in selected samples indicate an extraterrestrial component and support previous identification of a highly fractionated iron impactor in glaciofluvial sand. Our results illustrate the possibility to study impact structures hidden beneath a thick ice sheet based on transported samples and this opens a new avenue for identifying other potential impact craters in Greenland and Antarctica.     

The Obolon impact structure,Ukraine, and its ejecta deposits

Abstract— The Obolon impact structure, 18 km in diameter, is situated at the northeastern slope of the Ukrainian Shield near its margin with the Dnieper‐Donets Depression. The crater was formed in crystalline rocks of the Precambrian basement that are overlain by marine Carboniferous and continental Lower Triassic deposits. The post‐impact sediments comprise marine Middle Jurassic (Bajocian and Bathonian) and younger Mesozoic and Cenozoic deposits. Today the impact structure is buried beneath an about 300‐meter‐thick sedimentary rock sequence. Most information on the Obolon structure is derived from two boreholes in the western part of the crater. The lowest part of the section in the deepest borehole is composed by allogenic breccia of crystalline basement rocks overlain by clast‐rich impact melt rocks and suevites. Abundant shock metamorphic effects are planar deformation features (PDFs) in quartz and feldspars, kink bands in biotite, etc. Coesite and impact diamonds were found in clast‐rich impact melt rocks. Crater‐fill deposits are a series of sandstones and breccias with blocks of sedimentary rocks that are covered by a layer of crystalline rock breccia. Crystalline rock breccias, conglomeratic breccias, and sandstones with crystalline rock debris have been found in some boreholes around the Obolon impact structure to a distance of about 50 km from its center. Those deposits are always underlain by Lower Triassic continental red clay and overlain by Middle Jurassic marine clay. The K‐Ar age of impact melt glasses is 169 Ma, which corresponds to the Middle Jurassic (Bajocian) age. The composition of crater‐fill rocks within the crater and sediments outside the Obolon structure testify to its formation under submarine conditions.     

Petrography and composition of Martian regolith breccia meteorite Northwest Africa 7475

The Northwest Africa (NWA) 7475 meteorite is one of the several stones of paired regolith breccias from Mars based on petrography, oxygen isotope, mineral compositions, and bulk rock compositions. Its inventory of lithic clasts is dominated by vitrophyre impact melts that were emplaced while they were still molten. Other clast types include crystallized impact melt rocks, evolved plutonic rocks, possible basalts, contact metamorphosed rocks, and siltstones. Impact spherules and vitrophyre shards record airborne transport, and accreted dust rims were sintered on most clasts, presumably during residence in an ejecta plume. The clast assemblage records at least three impact events, one that formed an impact melt sheet on Mars ≤4.4 Ga ago, a second that assembled NWA 7475 from impactites associated with the impact melt sheet at 1.7–1.4 Ga, and a third that launched NWA 7475 from Mars ~5 Ma ago. Mildly shocked pyroxene and plagioclase constrain shock metamorphic conditions during launch to >5 and <15 GPa. The mild postshock‐heating that resulted from these shock pressures would have been insufficient to sterilize this water‐bearing lithology during launch. Magnetite, maghemite, and pyrite are likely products of secondary alteration on Mars. Textural relationships suggest that calcium‐carbonate and goethite are probably of terrestrial origin, yet trace element chemistry indicates relatively low terrestrial alteration. Comparison of Mars Odyssey gamma‐ray spectrometer data with the Fe and Th abundances of NWA 7475 points to a provenance in the ancient southern highlands of Mars. Gratteri crater, with an age of ~5 Ma and an apparent diameter of 6.9 km, marks one possible launch site of NWA 7475.     

Through the impact glass: Insight into the evolution of melt at the Mistastin Lake impact structure

By analyzing impact glass, the evolution of the impact melt at the Mistastin Lake impact structure was investigated. Impact glass clasts are present in a range of impactites, including polymict breccias and clast‐rich impact melt rock, and from a variety of settings within the crater. From the glass clasts analyzed, three petrographic subtypes of impact glass were identified based on their clast content, prevalence of schlieren, color, texture, and habit. Several alteration phases were also observed replacing glass and infilling vesicles; however, textural observations and quantified compositional data allowed for the identification of pristine impact glass. Although the various types of glasses show significant overlap in their major oxide composition, several subtle variations in the major oxide chemistry of the glass were observed. To investigate this variation, a least‐squares mixing model was implemented utilizing the composition of the glass and the known target rock chemistry to model the initial melt composition. Additionally, image analysis of the glass clasts was used to investigate whether the compositional variations correlated to textural difference in the lithologies. We propose that the textural and compositional dichotomy observed is a product of the evolution, assimilation, and emplacement of the glass. The dichotomy is reflective of the melt either being ballistically emplaced (group 2 glasses: occurring in melt‐poor polymict breccias at lowermost stratigraphic position outside the transient crater) or the result of late‐stage melt flows (group 1 glasses, occurring in melt‐bearing polymict breccias and impact melt rocks at higher stratigraphic positions outside the transient crater).     

Araguainha impact crater,Brazil. I. The interior part of the uplift

Abstract— The central uplift of the 40-km wide Araguainha impact structure, Brazil, consists of a ring, about 8 km in diameter, of up to 150-m high blocks of Devonian Furnas sandstone, which surround a central depression of elliptical shape (4.5 × 3.0 km). The depression is occupied by a pre-Devonian alkali-feldspar granite, shocked by pressures of 20–25 GPa and permeated by cataclastic shear zones and dikes of shocked granitic material. The granite is flanked and partly covered by several impact breccias: (1) Impact breccia with melt matrix overlies the granite in places and forms hills, bordering the granitic center in the S and SW. It is chemically identical with the granite and consists of thermally altered granitic clasts in a matrix of sanidine, quartz, biotite, muscovite, chlorite and riebeckite. (2) Polymict breccias form hills which border the central depression in the N and NW. Components are unshocked and shocked sediments, shock-melted sandstone, shocked granite and shock melt rocks in irregular masses and individual bodies, embedded in a fine-grained matrix. ⁴⁰Ar/³⁹Ar analyses show that the melt rocks solidified 246 Ma ago, indicating that the impact occurred at near the Permian-Triassic boundary, possibly when the area was covered by a shallow sea. The present chemistry and petrography of the melt rocks suggest that by reacting with seawater granitic impact melt was depleted of K and Rb and enriched in Na, and that later diagenetic processes produced replacement of feldspar by quartz and deposition of hematite. (3) Monomict breccias, consisting of unshocked, shocked and shock-fused quartz sandstones, form hills which surround the central depression in the SE and S. The Araguainha structure is an eroded complex crater, produced by an impact, 246 Ma ago. The depth of excavation was about 2.4 km, comprising Permian, Permo-Carboniferous and Devonian sediments and the granitic basement. The diameter of the transient crater was about 24 km. Erosion and weathering have removed most of the original crater fill and ejecta deposits, with the exception of remnants, preserved in the central uplift.     

Geochemical evidence of an extraterrestrial component in impact melt breccia from the Paleoproterozoic Dhala impact structure,India

The Paleoproterozoic Dhala structure with an estimated diameter of ~11 km is a confirmed complex impact structure located in the central Indian state of Madhya Pradesh in predominantly granitic basement (2.65 Ga), in the northwestern part of the Archean Bundelkhand craton. The target lithology is granitic in composition but includes a variety of meta‐supracrustal rock types. The impactites and target rocks are overlain by ~1.7 Ga sediments of the Dhala Group and the Vindhyan Supergroup. The area was cored in more than 70 locations and the subsurface lithology shows pseudotachylitic breccia, impact melt breccia, suevite, lithic breccias, and postimpact sediments. Despite extensive erosion, the Dhala structure is well preserved and displays nearly all the diagnostic microscopic shock metamorphic features. This study is aimed at identifying the presence of an impactor component in impact melt rock by analyzing the siderophile element concentrations and rhenium‐osmium isotopic compositions of four samples of impactites (three melt breccias and one lithic breccia) and two samples of target rock (a biotite granite and a mafic intrusive rock). The impact melt breccias are of granitic composition. In some samples, the siderophile elements and HREE enrichment observed are comparable to the target rock abundances. The Cr versus Ir concentrations indicate the probable admixture of approximately 0.3 wt.% of an extraterrestrial component to the impact melt breccia. The Re and Os abundances and the ¹⁸⁷Os/¹⁸⁸Os ratio of 0.133 of one melt breccia specimen confirm the presence of an extraterrestrial component, although the impactor type characterization still remains inconclusive.     

Geochemical and petrographic characteristics of impactites and Cretaceous target rocks from the Yaxcopoil‐1 borehole,Chicxulub impact structure,Mexico: Implications for target composition

Abstract— We present major and trace element data as well as petrographic observations for impactites (suevitic groundmass, bulk suevite, and melt rock particles) and target lithologies, including Cretaceous anhydrite, dolomite, argillaceous limestone, and oil shale, from the Yaxcopoil‐1 borehole, Chixculub impact structure. The suevitic groundmass and bulk suevite have similar compositions, largely representing mixtures of carbonate and silicate components. The latter are dominated by melt rock particles. Trace element data indicate that dolomitic rocks represented a significant target component that became incorporated into the suevites; in contrast, major elements indicate a strong calcitic component in the impactites. The siliceous end‐member requires a mafic component in order to explain the low SiO₂ content. Multicomponent mixing of various target rocks, the high alteration state, and dilution by carbonate complicate the determination of primary melt particle compositions. However, two overlapping compositional groups can be discerned—a high‐Ba, low‐Ta group and a high‐Fe, high‐Zn, and high‐Hf group. Cretaceous dolomitic rocks, argillaceous limestone, and shale are typically enriched in U, As, Br, and Sb, whereas anhydrite contains high Sr contents. The oil shale samples have abundances that are similar to the North American Shale Composite (NASC), but with a comparatively high U content. Clastic sedimentary rocks are characterized by relatively high Th, Hf, Zr, As, and Sb abundances. Petrographic observations indicate that the Cretaceous rocks in the Yaxcopoil‐1 drill core likely register a multistage deformation history that spans the period from pre‐ to post‐impact. Contrary to previous studies that claimed evidence for the presence of impact melt breccia injection veins, we have found no evidence in our samples from a depth of 1347–1348 m for the presence of melt breccia. We favor that clastic veinlets occur in a sheared and altered zone that underwent intense diagenetic overprint prior to the impact event.     

Dating terrestrial impact events

Abstract— Systematic examination of dating results from various craters indicates that about 90% of the rocks affected by an impact preserve their pre-shock ages because shock and post-shock conditions are not sufficient to disturb isotopic dating systems. In the other 10% of target lithologies, various geochronometers show significant shock-induced effects. Major problems in dating impactites are caused by their non-equlibrated character. They often display complex textures, where differently shocked and unshocked phases interfinger on the sub-mm scale. Due to this, dating on whole rock samples or insufficiently pure mineral fractions often yielded ambiguous results that set broad age limits but are not sufficient to answer reliably questions such as a possible periodicity in cratering on Earth, or correlation of impact events with mass extinctions. Dating results from shock recovery experiments indicate that post-shock annealing plays the most important role in resetting isotopic clocks. Therefore, the major criterion for sample selection in and around craters is the post-shock thermal regime. Based on their different thermal evolution, the following geological impact formations can be distinguished: (1) the coherent impact melt layer, (2) allochthonous breccia deposits, (3) the crater basement, and (4) distant ejecta deposits. Samples of the coherent impact melt layer are the most suitable candidates for dating. Excellent ages of high precision can be obtained by internal Rb-Sr, and Sm-Nd isochrons, U-Pb analyses on newly crystallized accessory minerals, and K-Ar (³⁹Ar-⁴⁰Ar) dating of clast-free melt rocks. Fission track counting on glassy material has yielded correct ages, and paleomagnetic measurements have been successfully applied to post-Triassic craters. In the ideal case of a fast-cooling impact melt layer, all these different techniques should give identical ages. Allochthonous breccias contain shocked, unshocked, and/or glassy components in various proportions; and, hence, each of these ejecta deposits has its own individual thermal history, making sample evaluation difficult Glassy melt particles in suevitic breccias are well suited for fission track and Ar-Ar dating. Weakly shocked material may yield reliable Ar-Ar and fission track ages, if formation temperatures were high, and cooling rates moderate. In contrast, highly shocked but rapidly cooled lithologies show only disturbed and not reset isotopic systems. For ejecta deposits and the crater wall of young craters, dating with cosmogenic nuclides is a new and powerful technique. Crater basement lithologies have a high potential in impact dating, although it has not been exploited so far. A prerequisite for resetting of isotopic clocks in these lithologies is the presence of an overlaying impact melt layer, which causes thermal metamorphism. Fission track and K-Ar techniques are most promising, because both systems are easily reset at low temperatures. Good candidates for impact dating are long-term annealed rocks, even if shock metamorphic overprint is very weak. In addition, Ar-Ar dating dating of pseudotachylites appears promising. In large impact structures, where high temperatures persist for long times, polymict “footwall” breccias beneath the melt sheet are also appropriate for dating, using the isochron approach and U-Pb on accessory minerals. Distant ejecta material have undergone very fast cooling, and the ejecta deposits have ambient formation temperatures. Among this material, tektites and impact melt glass are ideal objects for Ar-Ar and fission track impact dating. Dating on other material from distant ejecta deposits, such as U-Pb analyses on zircons, offers new possibilities. Efforts to correlate distant ejecta with distinct craters critically depend on proper error assignment to a specific age. This aspect is illustrated on the K/T boundary example.     

Hyperspectral imaging of drill core from the Steen River impact structure,Canada: Implications for hydrothermal activity and formation of suevite‐like breccias

Hyperspectral imaging can be used to rapidly identify and map the spatial distributions of many minerals. Here, hyperspectral mapping in three wavelength regions (visible and near‐infrared, shortwave infrared, and thermal infrared) was applied to drill cores (ST001, ST002, and ST003) penetrating a continuous sequence of crater‐fill breccias from the Steen River impact structure in Alberta, Canada. The combined data sets reveal distinct mineralogical layering, with breccias derived predominantly from sedimentary rocks overlying those derived from granitic basement. This stratigraphy demonstrates that the breccias were not appreciably disturbed following deposition, which is inconsistent with formation models of similar breccias (suevites) by explosive impact melt–fluid interaction. At Steen River, volatiles from sedimentary target rocks were an inherent part of forming these enigmatic breccias. Approximately three quarters of terrestrial impact structures contain sedimentary target rocks; therefore, the role of volatiles in producing so‐called suevitic breccias may be more widespread than previously realized. The hyperspectral maps, specifically within the SWIR wavelength region, also delineate minerals associated with postimpact hydrothermal activity, including ammoniated clay and feldspar minerals not detectable using traditional techniques. These nitrogen‐bearing minerals may have originated from microbial processes, associated with oil‐ and gas‐producing units in the crater vicinity. Such minerals may have important implications for the production of habitable environments by impact‐induced hydrothermal activity on Earth and Mars.     

Tookoonooka, a large buried early Cretaceous impact structure in the Eromanga Basin of southwestern Queensland, Australia

Abstract— The ～66 km wide Tookoonooka impact structure (27°07′S, 142°50′E) was first recognised, from seismic profiles, as a circular structure consisting of a concentric arrangement of anticlines and synclines, which surround a complex central dome, ～22 km wide. A gravity low and a central magnetic high characterize the structure. Now buried by up to 900 m of Cretaceous and Tertiary clastic sediments, the Tookoonooka structure was formed ～128 Ma ago, during deposition of the paralic Cadna-owie Formation. Thin sections from a centrally located exploration well reveal an impact melt breccia, composed of local Ordovician quartz-mica schist bedrock. Detailed study of planar deformation features (PDFs) in quartz grains from this breccia show 64 lamellae sets in 25 grains. Most of the PDF measurements correspond to ζ {112～2} andr/z {101～1}/ {011～1} crystallographic indices, with five other orientations also measured. This distribution of PDFs corresponds to that found in quartz from impact structures in porous sedimentary rock targets, thus confirming an impact origin for Tookoonooka.     

Shocked rocks and impact glasses from the El'gygytgyn impact structure,Russia

Abstract— The El'gygytgyn impact structure is about 18 km in diameter and is located in the central part of Chukotka, arctic Russia. The crater was formed in volcanic rock strata of Cretaceous age, which include lava and tuffs of rhyolites, dacites, and andesites. A mid‐Pliocene age of the crater was previously determined by fission track (3.45 ± 0.15 Ma) and ⁴⁰Ar/³⁹Ar dating (3.58 ± 0.04 Ma). The ejecta layer around the crater is completely eroded. Shock‐metamorphosed volcanic rocks, impact melt rocks, and bomb‐shaped impact glasses occur in lacustrine terraces but have been redeposited after the impact event. Clasts of volcanic rocks, which range in composition from rhyolite to dacite, represent all stages of shock metamorphism, including selective melting and formation of homogeneous impact melt. Four stages of shocked volcanic rocks were identified: stage I (≤35 GPa; lava and tuff contain weakly to strongly shocked quartz and feldspar clasts with abundant PFs and PDFs; coesite and stishovite occur as well), stage II (35–45 GPa; quartz and feldspar are converted to diaplectic glass; coesite but no stishovite), stage III (45–55 GPa; partly melted volcanic rocks; common diaplectic quartz glass; feldspar is melted), and stage IV (>55 GPa; melt rocks and glasses). Two main types of impact melt rocks occur in the crater: 1) impact melt rocks and impact melt breccias (containing abundant fragments of shocked volcanic rocks) that were probably derived from (now eroded) impact melt flows on the crater walls, and 2) aerodynamically shaped impact melt glass “bombs” composed of homogeneous glass. The composition of the glasses is almost identical to that of rhyolites from the uppermost part of the target. Cobalt, Ni, and Ir abundances in the impact glasses and melt rocks are not or only slightly enriched compared to the volcanic target rocks; only the Cr abundances show a distinct enrichment, which points toward an achondritic projectile. However, the present data do not allow one to unambiguously identify a meteoritic component in the El'gygytgyn impact melt rocks.     

The Keurusselkä impact structure,Finland—Impact origin confirmed by characterization of planar deformation features in quartz grains

Abstract– Although the meteorite impact origin of the Keurusselkä impact structure (central Finland) has been established on the basis of the occurrence of shatter cones, no detailed microscopic examination of the impactites from this structure has so far been made. Previous microscope investigations of in situ rocks did not yield any firm evidence of shock features (Raiskila et al. 2008; Kinnunen and Hietala 2009). We have carried out microscopic observations on petrographic thin sections from seven in situ shatter cone samples and report here the discovery of planar fractures (PFs) and planar deformation features (PDFs) in quartz and feldspar grains. The detection and characterization of microscopic shock metamorphic features in the investigated samples substantiates a meteorite impact origin for the Keurusselkä structure. The crystallographic orientations of 372 PDF sets in 276 quartz grains were measured, using a universal stage (U‐stage) microscope, for five of the seven distinct shatter cone samples. Based on our U‐stage results, we estimate that investigated shatter cone samples from the Keurusselkä structure have experienced peak shock pressures from approximately 2 GPa to slightly less than 20 GPa for the more heavily shocked samples. The decoration of most of the PDFs with fluid inclusions also indicates that these originally amorphous shock features were altered by postimpact processes. Finally, our field observations indicate that the exposed surface corresponds to the crater floor; it is, however, difficult to estimate the exact diameter of the structure and the precise amount of material that has been eroded since its formation.