Monitoring and Modeling of Metal Concentration Distributions in Anoxic Basins: Aitoliko Lagoon, Greece

The balance between physicochemical processes, influencing vertical and temporal distributions of metal compounds in one relatively isolated anoxic environment, constitutes the objective of the present work. Ion activity product (IAP) was calculated for manganese and iron sulfides, in order to define the metal sulfide forms that control Fe and Mn solubility in the bottom waters of anoxic lagoons. Iron solubility depended on amorphous FeS formation, while manganese sulfides were a minor component in a solid solution lowering its solid-phase activity. A theoretical physicochemical model was developed for the iron speciation, based on experimental pH and redox potential data. A very good match was achieved for the measured and the theoretical total dissolved iron, at all depths. The dominance of oxidant iron species Fe(OH) ₃ ^? in the surface waters and their sequence by FeSH⁺ and FeS_aq in the deeper layers brings out the influence of physicochemical parameters (dissolved oxygen, sulfide, pH and E_h) in vertical distribution of dissolved metal species, in anoxic/hypoxic basins. Based on these findings, we can conclude that the distribution of manganese and iron is of special interest, not only because these are the indicators of redox conditions but also for the role of their oxidized/reduced forms in the formation of the biogeochemical structure of redox zone.     

Reduced sulfur and iron species in anoxic water column of meromictic crater Lake Pavin (Massif Central, France)

The vertical distribution of reduced sulfur species (RSS including H₂S/HS⁻, S⁰, electroactive FeS) and dissolved Fe(II) was studied in the anoxic water column of meromictic Lake Pavin. Sulfide concentrations were determined by two different analytical techniques, i.e. spectophotometry (methylene blue technique) and voltammetry (HMDE electrode). Total sulfide concentrations determined with methylene blue method (∑H₂S_MBRS) were in the range from 0.6 µM to 16.7 µM and were substantially higher than total reduced sulfur species (RSS_V) concentrations determined by voltammetry, which ranged from 0.1 to 5.6 μM. The observed difference in the sulfide concentrations between the two methods can be assigned to the presence of FeS colloidal species.Dissolved Fe was high (> 1000 µM), whereas dissolved Mn was only 25 µM, in the anoxic water column. This indicates that Fe is the dominant metal involved in sulfur redox cycling and precipitation. Consequently, in the anoxic deep layer of Lake Pavin, “free” sulfide, H₂S/HS⁻, was low; and about 80% of total sulfide detected was in the electroactive FeS colloidal form. IAP calculations showed that the Lake Pavin water column is saturated with respect to FeS_am phase. The upper part of monimolimnion layer is characterized by higher concentrations of S(0) (up to 3.4 µM) in comparison to the bottom of the lake. This behavior is probably influenced by sulfide oxidation with Fe(III) oxyhydroxide species.     

Arsenite sorption on troilite (FeS) and pyrite (FeS2)

Arsenic is a toxic metalloid whose mobility and availability are largely controlled by sorption on sulfide minerals in anoxic environments. Accordingly, we investigated reactions of As(III) with iron sulfide (FeS) and pyrite (FeS₂) as a function of total arsenic concentration, suspension density, sulfide concentration, pH, and ionic strength. Arsenite partitioned strongly on both FeS and FeS₂ under a range of conditions and conformed to a Langmuir isotherm at low surface coverages; a calculated site density of near 2.6 and 3.7 sites/nm² for FeS and FeS₂, respectively, was obtained. Arsenite sorbed most strongly at elevated pH (>5 to 6). Although solution data suggested the formation of surface precipitates only at elevated solution concentrations, surface precipitates were identified using X-ray absorption spectroscopy (XAS) at all coverages. Sorbed As was coordinated to both sulfur [d(As-S) = 2.35 Å] and iron [d(As-Fe) = 2.40 Å], characteristic of As coordination in arsenopyrite (FeAsS). The absorption edge of sorbed As was also shifted relative to arsenite and orpiment (As₂S₃), revealing As(III) reduction and a complete change in As local structure. Arsenic reduction was accompanied by oxidation of both surface S and Fe(II); the FeAsS-like surface precipitate was also susceptible to oxidation, possibly influencing the stability of As sorbed to sulfide minerals in the environment. Sulfide additions inhibit sorption despite the formation of a sulfide phase, suggesting that precipitation of arsenic sulfide is not occurring. Surface precipitation of As on FeS and FeS₂ supports the observed correlation of arsenic and pyrite and other iron sulfides in anoxic sediments.     

A comparison of the early diagenetic environment in intertidal sands and muds of the Manukau Harbour,New Zealand

The early diagenetic environment of intertidal sandy sediments (sands) and muddy sediments (muds) is described and compared from two cores taken from an unpolluted part of the Manukau Harbour, New Zealand. Extraction techniques characterized the form of the trace elements (Fe, Mn, S, C, Pb, Zn, Cu) at different depths in the sediment. Dissolved forms of Fe, Mn, and S were measured in interstitial water. Nonresidual metal concentrations, humic acid, FeS, and FeS₂ are an order of magnitude higher in the muds than in the sands because of dilution by unreactive sand particles. Muds contain a larger proportion of metals in the mobile fractions; exchangeable (Mn), carbonate (Mn, Fe, Zn), and easily-reducible oxide (Fe, Mn, Zn, Pb). This is due to greater surface area (for Mn adsorption); the favorable conditions for MnCO₃, FeCO₃, and FeS precipitation; and higher concentrations of easily reducible iron oxide and humic acid. Therefore, compared to the sands, muds are more important as reservoirs for toxic metals, both in terms of quantity and availability. At either site there was very little difference between the forms of Zn, Pb or Cu identified by sequential extraction as sediments changed from oxic to anoxic conditions. One reason for this is that the amounts and proportions of some of the important components that bind metals, viz., amorphous iron hydrous oxides, humic acids, and FeS₂, do not change much. Other components that do change with redox conditions, for example, manganese phases and FeS, are only minor components of the sediment. Redox conditions, then, have relatively little effect on trace-metal partitioning in the sediment matrix of these unpolluted sediments.     

Arsenic repartitioning during biogenic sulfidization and transformation of ferrihydrite

Iron (hydr)oxides are strong sorbents of arsenic (As) that undergo reductive dissolution and transformation upon reaction with dissolved sulfide. Here we examine the transformation and dissolution of As-bearing ferrihydrite and subsequent As repartitioning amongst secondary phases during biotic sulfate reduction. Columns initially containing As(V)-ferrihydrite coated sand, inoculated with the sulfate reducing bacteria Desulfovibrio vulgaris (Hildenborough), were eluted with artificial groundwater containing sulfate and lactate. Rapid and consistent sulfate reduction coupled with lactate oxidation is observed at low As(V) loading (10% of the adsorption maximum). The dominant Fe solid phase transformation products at low As loading include amorphous FeS within the zone of sulfate reduction (near the inlet of the column) and magnetite downstream where Fe(II)_(aq) concentrations increase; As is displaced from the zone of sulfidogenesis and Fe(III)_(s) depletion. At high As(V) loading (50% of the adsorption maximum), sulfate reduction and lactate oxidation are initially slow but gradually increase over time, and all As(V) is reduced to As(III) by the end of experimentation. With the higher As loading, green rust(s), as opposed to magnetite, is a dominant Fe solid phase product. Independent of loading, As is strongly associated with magnetite and residual ferrihydrite, while being excluded from green rust and iron sulfide. Our observations illustrate that sulfidogenesis occurring in proximity with Fe (hydr)oxides induce Fe solid phase transformation and changes in As partitioning; formation of As sulfide minerals, in particular, is inhibited by reactive Fe(III) or Fe(II) either through sulfide oxidation or complexation.     

Biogeochemistry of pyrite and iron sulfide oxidation in marine sediments

Pyrite (FeS₂) and iron monosulfide (FeS) play a central role in the sulfur and iron cycles of marine sediments. They may be buried in the sediment or oxidized by O₂ after transport by bioturbation to the sediment surface. FeS₂ and FeS may also be oxidized within the anoxic sediment in which NO₃⁻, Fe(III) oxides, or MnO₂ are available as potential electron acceptors. In chemical experiments, FeS₂ and FeS were oxidized by MnO₂ but not with NO₃⁻ or amorphous Fe(III) oxide (Schippers and Jørgensen, 2001). Here we also show that in experiments with anoxic sediment slurries, a dissolution of tracer-marked ⁵⁵FeS₂ occurred with MnO₂ but not with NO₃⁻ or amorphous Fe(III) oxide as electron acceptor. To study a thermodynamically possible anaerobic microbial FeS₂ and FeS oxidation with NO₃⁻ or amorphous Fe(III) oxide as electron acceptor, more than 300 assays were inoculated with material from several marine sediments and incubated at different temperatures for > 1 yr. Bacteria could not be enriched with FeS₂ as substrate or with FeS and amorphous Fe(III) oxide. With FeS and NO₃⁻, 14 enrichments were obtained. One of these enrichments was further cultivated anaerobically with Fe²⁺ and S⁰ as substrates and NO₃⁻ as electron acceptor, in the presence of ⁵⁵FeS₂, to test for co-oxidation of FeS₂, but an anaerobic microbial dissolution of ⁵⁵FeS₂ could not been detected. FeS₂ and FeS were not oxidized by amorphous Fe(III) oxide in the presence of Fe-complexing organic compounds in a carbonate-buffered solution at pH 8. Despite many different experiments, an anaerobic microbial dissolution of FeS₂ could not be detected; thus, we conclude that this process does not have a significant role in marine sediments. FeS can be oxidized microbially with NO₃⁻ as electron acceptor. O₂ and MnO₂, but not NO₃⁻ or amorphous Fe(III) oxide, are chemical oxidants for both FeS₂ and FeS.     

Sulfur biogeochemistry and isotopic fractionation in shallow groundwater and sediments of Owens Dry Lake, California

Groundwater and sediment samples (∼ 1 m depth) at sites representative of different groundwater pathways were collected to determine the aqueous speciation of sulfur and the fractionation of sulfur isotopes in aqueous and solid phases. In addition, selected sediment samples at 5 depths (from oxic to anoxic layers) were collected to investigate the processes controlling sulfur biogeochemistry in sedimentary layers. Pyrite was the dominant sulfur-bearing phase in the capillary fringe and groundwater zones where anoxic conditions are found. Low concentrations of pyrite (< 5.9 g kg^− 1) coupled with high concentrations of dissolved sulfide (4.81 to 134.7 mg L^− 1) and low concentrations of dissolved Fe (generally < 1 mg L^− 1) and reducible solid-phase Fe indicate that availability of reactive Fe limits pyrite formation. The relative uniformity of down-core isotopic trends for sulfur-bearing mineral phases in the sedimentary layers suggests that sulfate reduction does not result in significant sulfate depletion in the sediment. Sulfate availability in the deeper sediments may be enhanced by convective vertical mixing between upper and lower sedimentary layers due to evaporative concentration. The large isotope fractionation between dissolved sulfate and sedimentary sulfides at Owens Lake provides evidence for initial fractionation from bacterial sulfate reduction and additional fractionation generated by sulfide oxidation followed by disproportionation of intermediate oxidation state sulfur compounds. The high salinity in the Owens Lake brines may be a factor controlling sulfate reduction and disproportionation in hypersaline conditions and results in relatively constant values for isotope fractionation between dissolved sulfate and total reduced sulfur.     

Impact of Oyster Farming on Diagenetic Processes and the Phosphorus Cycle in Two Estuaries (Brittany,France)

This study aims to compare the impact of oyster cultures on diagenetic processes and the phosphorus cycle in the sediments of the Aber Benoît and the Rivière d’Auray, estuary of Brittany, France. Our results showed clear evidence of the seasonal impact of oyster cultures on sediment characteristics (grain size and organic matter parameters) and the phosphorus cycle, especially in the Aber Benoît. At this site, seasonal variations in sulfide and Fe concentrations in pore waters, as well as Fe–P concentrations in the solid phase, highlighted a shift from a system governed by iron reduction (Reference) to a system governed by sulfate reduction (beneath oyster). This could be partly explained by the increase in labile organic matter (i.e., biodeposits) beneath oysters, whose mineralization by sulfate led to high sulfide concentrations in pore waters (up to 4,475 µmol l^?1). In turn, sulfide caused an enhanced release of phosphate in the summer, as adsorption sites for phosphate decreased through the formation of iron–sulfide compounds (FeS and FeS₂). In the Aber Benoît, dissolved Fe/PO₄ ratios could be used as an indicator of phosphate release into oxic water. Low Fe/PO₄ ratios in the summer indicated higher effluxes of phosphate toward the water column (up to 47 µmol m^?2 h^?1). At other periods, Fe/PO₄ ratios higher than 2 mol/mol indicated very low phosphate fluxes. In contrast, in the Rivière d’Auray, the occurrence of macroalgae, stranding regularly all over the site, clearly masked the impact of oyster cultures on sediment properties and the phosphorus cycle and made the use of Fe/PO₄ ratios more difficult in terms of indicators of phosphate release.     

Factors Controlling Sulfide Geochemistry in Sub-tropical Estuarine and Bay Sediments

The primary factors that control the concentration of total reduced (inorganic) sulfide in coastal sediments are believed to be the availability of reactive iron, dissolved sulfate and metabolizable organic carbon. We selected nine sites in shallow (<3 m), close to sub-tropical, estuaries and bays along the central Texas coast that represented a range in sediment grain size (a proxy for reactive iron), salinity (a proxy for dissolved sulfate), and total organic carbon (a proxy for metabolizable organic carbon). Based on these parameters a prediction was made of which factor was likely to control total reduced sulfide at each site and what the relative total reduced sulfide concentration was likely to be. To test the prediction, the sediments were analyzed for total reduced sulfide, acid volatile sulfide, and citrate dithionate-extractable, HCl-extractable and total Fe in the solid phase. Using solid-state gold–mercury amalgam microelectrodes and voltammetry, we determined pore water depth profiles of Fe(II) and ΣH₂S and presence or absence of FeS_(aq). At five of the nine sites the calculated degree of sufildization of citrate dithionite-reactive-iron was close to or greater than 1 indicating that rapidly reactive iron was probably the limiting factor for iron sulfide mineral formation. At one site (salinity = 0.9) dissolved Fe(II) was high, ΣH₂S was undetectable and the total reduced sulfide concentration was low indicating sulfate limitation. At the last three sites a low degree of sulfidization and modest total reduced (inorganic) sulfide concentrations appeared to be the result of a limited supply of metabolizable organic carbon. Fe(II)–S(-II) clusters (FeS_(aq)) were undetectable in 10 out of 12 bay sediment profiles where ΣH₂S was close to or below detection limits, but was observed in all other porewater profiles. Acid volatile sulfide, but not total reduced sulfide, was well correlated with total organic carbon and ranged from being undetectable in some cores to representing a major portion of total reduced sulfide in other cores. Although predicted controls on total reduced sulfide were good for very low salinity water or sandy sediments, they were only right about half the time for the other sediments. The likely reasons for the wrong predictions are the poor correlation of total organic carbon with grain size and differing fractions of metabolizable organic carbon in different sedimentary environments. Differences in sediment accumulation rates may also play a role, but these are difficult to determine in this region where hurricanes often resuspend and move sediments. This study demonstrates the need to examine more complex and often difficult to determine parameters in anoxic “normal marine” sediments if we are to understand what controls the concentration and distribution of sulfides.     

Pyritization processes and greigite formation in the advancing sulfidization front in the upper Pleistocene sediments of the Black Sea

Pyritization in late Pleistocene sediments of the Black Sea is driven by sulfide formed during anaerobic methane oxidation. A sulfidization front is formed by the opposing gradients of sulfide and dissolved iron. The sulfidization processes are controlled by the diffusion flux of sulfide from above and by the solid reactive iron content. Two processes of diffusion-limited pyrite formation were identified. The first process includes pyrite precipitation with the accumulation of iron sulfide precursors with the average chemical composition of FeS_n (n = 1.10-1.29), including greigite. Elemental sulfur and polysulfides, formed from H₂S by a reductive dissolution of Fe(III)-containing minerals, serve as intermediates to convert iron sulfides into pyrite. In the second process, a “direct” pyrite precipitation occurs through prolonged exposure of iron-containing minerals to dissolved sulfide. Methane-driven sulfate reduction at depth causes a progressive formation of pyrite with a δ³⁴S of up to +15.0‰. The S-isotopic composition of FeS₂ evolves due to contributions of different sulfur pools formed at different times. Steady-state model calculations for the advancement of the sulfidization front showed that the process started at the Pleistocene/Holocene transition between 6360 and 11 600 yr BP. Our study highlights the importance of anaerobic methane oxidation in generating and maintaining S-enriched layers in marine sediments and has paleoenvironmental implications.     

Voltammetric evidence for soluble FeS complexes in anoxic estuarine muds

Voltammetric methods using direct insertion of a gold-amalgam microelectrode with a sensitive, computercontrolled voltammeter detected soluble iron(II) sulfide, [FeS]_aq, in the porewaters of anoxic, sulfidic, fine-grained sediments from the Loughor Estuary, Wales. The voltammetric results are reproducible. Studies of cores stored in sealed, refrigerated containers for up to 21 d reveal no measurable oxidation. [FeS]_aq forms in this estuarine environment as a result of the dissolution of amorphous FeS, and appears to be involved in the formation of pyrite. [FeS]_aq makes no significant contribution to the total sulfide and iron contents of the sediment but could constitute an important component of the dissolved Fe(II) and S(−II) contents of the porewater. Mass balance calculations show pyrite forms in this system by the addition of sulfur to FeS rather than by the loss of iron from FeS. The overall process appears to involve [FeS]_aq as an intermediary. Although the porewaters of the Loughor Estuary sediments are iron-rich relative to seawater, the iron sulfide-forming process is iron-limited rather than sulfide-limited. Reactive iron is bound to sulfide rapidly in the sediment. After the reactive iron is bound to sulfide, additional sulfide produced is fixed as pyrite.     

Greigite: a true intermediate on the polysulfide pathway to pyrite

The formation of pyrite (FeS₂) from iron monosulfide precursors in anoxic sediments has been suggested to proceed via mackinawite (FeS) and greigite (Fe₃S₄). Despite decades of research, the mechanisms of pyrite formation are not sufficiently understood because solid and dissolved intermediates are oxygen-sensitive and poorly crystalline and therefore notoriously difficult to characterize and quantify.     

Early oxidation of organic matter in pelagic sediments of the eastern equatorial Atlantic: suboxic diagenesis

Pore water profiles of total-CO₂, pH, PO^3?₄, NO^?₃ plus NO^?₂, SO^2?₄, S^2?, Fe²⁺ and Mn²⁺ have been obtained in cores from pelagic sediments of the eastern equatorial Atlantic under waters of moderate to high productivity. These profiles reveal that oxidants are consumed in order of decreasing energy production per mole of organic carbon oxidized (O₂ > manganese oxides ~ nitrate > iron oxides > sulfate). Total CO₂ concentrations reflect organic regeneration and calcite dissolution. Phosphate profiles are consistent with organic regeneration and with the effects of release and uptake during inorganic reactions. Nitrate profiles reflect organic regeneration and nitrate reduction, while dissolved iron and manganese profiles suggest reduction of the solid oxide phases, upward fluxes of dissolved metals and subsequent entrapment in the sediment column. Sulfate values are constant and sulfide is absent, reflecting the absence of strongly anoxic conditions.     

Early diagenesis in sediments from Danish coastal waters: Microbial activity and Mn-Fe-S geochemistry

Depth distributions of bacterial respiration of O₂, NO₃⁻ and SO₄²⁻ were compared with geochemical data for Mn, Fe and S in coastal sediments from water depths between 26 and 520 m. As water depth increased, the zone of SO₄²⁻ respiration was found deeper in the sediment and was eventually separated from the surface-located activity of O₂ and NO₂⁻ respiration. At the deepest station additional SO₄²⁻ reduction activity was observed in small, detrital aggregates on the sediment surface. Dissolved Mn²⁺ and Fe²⁺ appeared between the O₂- plus NO₃⁻-containing surface layer and the H₂S-plus FeS-containing sediment below. This was a result of Mn and Fe reductions coupled to either the oxidation of sulfide or the mineralization of organic matter. Tracer experiments showed that both FeS, FeS₂ and S⁰ were important radiolabelled products of sulfate respiration in this intermediate zone. In the same zone, the overall degradation of organic matter seemed to be underestimated by the assay of SO^2-₄ respiration and additional mineralization by Mn and Fe reductions was likely.     

Geochemistry of Flooded Underground Mine Workings Influenced by Bacterial Sulfate Reduction

Unlike the majority of the water in the flooded mine complex of Butte Montana, which includes the highly acidic Berkeley pit lake, groundwater in the flooded West Camp underground mine workings has a circum-neutral pH and contains at least 8 μM aqueous sulfide. This article examines the geochemistry and stable isotope composition of this unusual H₂S-rich mine water, and also discusses problems related to the colorimetric analysis of sulfide in waters that contain FeS_(aq) cluster compounds. The West Camp mine pool is maintained at a constant elevation by continuous pumping, with discharge water that contains elevated Mn (90 μM), Fe (16 μM), and As (1.3 μM) but otherwise low metal concentrations. Dissolved inorganic carbon in the mine water is in chemical and isotopic equilibrium with rhodochrosite in the mineralized veins. The mine water is under-saturated with mackinawite and amorphous FeS, but is supersaturated with Cu- and Zn-sulfides. However, voltammetry studies show that much of the dissolved sulfide and ferrous iron are present as FeS_(aq) cluster molecules: as a result, the free concentration of the West Camp water is poorly constrained. Concentrations of dissolved sulfide determined by colorimetry were lower than gravimetric assays obtained by AgNO₃ addition, implying that the FeS_(aq) clusters are not completely extracted by the Methylene Blue reagent. In contrast, the clusters are quantitatively extracted as Ag₂S after addition of AgNO₃. Isotopic analysis of co-existing aqueous sulfide and sulfate confirms that the sulfide was produced by sulfate-reducing bacteria (SRB). The H₂S-rich mine water is not confined to the immediate vicinity of the extraction well, but is also present in flooded mine shafts up to 3 km away, and in samples bailed from mine shafts at depths up to 300 m below static water level. This illustrates that SRB are well established throughout the southwestern portion of the extensive (>15 km³) Butte flooded mine complex.     

Geochemical and anthropogenic enrichments of Mo in sediments from perennially oxic and seasonally anoxic lakes in Eastern Canada

We measured the vertical distributions of Mo, Fe, Mn, sulfide, sulfate, organic carbon, major ions, and pH in sediment porewater from one perennially oxic and three seasonally anoxic lacustrine basins in Eastern Canada, as well as those of Mo, acid volatile sulfide, Fe, Mn, Al, organic C, ²¹⁰Pb and ¹³⁷Cs in sediment cores from the same sites. The only input of anthropogenic Mo to these lakes comes from atmospheric deposition.The relatively monotonous distribution of Mo in the porewater of three seasonally anoxic basins suggests that Mo is not redistributed in the sedimentary column during periods of anoxia. In contrast, porewater Mo profiles obtained at three sampling dates in a perennially oxic basin display sharp Mo peaks below the sediment-water interface, indicating redistribution subsequent to deposition. Modeling of these latter porewater Mo profiles with a diagenetic reaction-transport equation coupled to comparisons among the various porewater and solid phase profiles reveal that Mo is released at 1-2 cm depth as a consequence of the reductive dissolution of Fe oxyhydroxides and scavenged both at the vicinity of the sediment-water interface, by re-adsorption onto authigenic Fe oxyhydroxides, and deeper in the sediments where dissolved sulfide concentrations are higher. The estimated rate constant for the adsorption of Mo onto Fe oxyhydroxides is 36 ± 45 cm³ mol⁻¹ s⁻¹.Diagenetic modeling indicates that authigenic Mo in sediments of the perennially oxic basin represents about one-third of the total solid phase Mo in the first cm below the sediment-water interface and only one tenth below this horizon. If we assume that no authigenic Mo is accumulated in the seasonally anoxic lake sediments we conclude that the sediment Mo concentrations, which are up to 3-16 times higher than the average lithogenic composition, depending on the lake, are mainly due to atmospheric deposition of anthropogenic Mo and not to the formation of authigenic Mo phases. Reconstructed historical records of the atmospheric Mo deposition indicate maximum values in the 1970s and 1980s and significant decreases since then. Emissions to the atmosphere associated with the smelting of non-ferrous ores and coal combustion appear to be the most important sources of anthropogenic Mo.     

Chemical and structural characterization of As immobilization by nanoparticles of mackinawite (FeSm)

The mobility and availability of arsenite, As(III), in anoxic environments is largely controlled by adsorption onto iron sulfides and/or precipitation of arsenic in solid phases. The interaction of As(III) with synthetic mackinawite (FeS_m) in pH 5 and 9 suspensions was investigated using high-angle annular dark field (HAADF) scanning transmission electron microscopy (STEM), STEM elemental mapping, high resolution TEM, and X-ray photoelectron spectroscopy (XPS). At pH 5, arsenic sulfide phases precipitate among the FeS_m particles as discrete particles that are an amorphous hydrous phase of arsenic sulfide. The oxidation state of As in the surface layers of the arsenic sulfide precipitates is ‘realgar-like’ based on XPS results showing that > 75% of the As 3d peak area is due to As with oxidation states between 0 and 2+. Discrete, arsenic sulfide precipitates are absent at pH 9, but elemental mapping in STEM-EDX mode shows that arsenic is uniformly distributed on the FeS_m, suggesting that uptake is caused by the sorption of As(III) oxyanions and/or the precipitation of highly dispersed arsenic sulfides on FeS_m. XPS also revealed that the FeS_m that equilibrated without As(III) has a more oxidized surface composition than the sample at pH 9, as indicated by the higher concentration of O ( three times greater than that at pH 9) and the larger fraction of Fe(III) species making up the total Fe (2p_3/2) peak. These findings provide a better understanding of redox processes and phase transitions upon As(III) adsorption on iron sulfide substrates.     

Geochemistry of trace metals associated with reduced sulfur in freshwater sediments

Porewater concentration profiles were determined for Fe, trace elements (As, Cd, Co, Cu, Mn, Ni, Pb, Zn), sulfide, SO₄ and pH in two Canadian Shield lakes (Chevreuil and Clearwater). Profiles of pyrite, sedimentary trace elements associated with pyrite and AVS were also obtained at the same sites. Thermodynamic calculations are used, for the anoxic porewaters where sulfide was measured, to characterize diagenetic processes involving sulfide and trace elements and to illustrate the importance of sulfide, and possibly polysulfides and thiols, in binding trace elements. The ion activity products (IAP) of Fe sulfide agree with the solubility products (K_s) of greigite or mackinawite. For Co, Ni and Zn, IAP values are close to the K_S values of their sulfide precipitates; for Cu and Pb, IAP/K_s indicate large oversaturations, which can be explained by the presence of other ligands (not measured) such as polysulfides (Cu) and thiols (Pb). Cobalt, Cu, Ni and Zn porewater profiles generally display a decrease in concentration with increasing ΣH₂S, as expected for transition metals, whereas Cd, Pb and Zn show an increase (mobilisation). The results suggest that removal of trace elements from anoxic porewaters occurs by coprecipitation (As and Mn) with FeS(s) and/or adsorption (As and Mn) on FeS(s), and by formation of discrete solid sulfides (Cd, Cu, Ni, Pb, Zn and Co). Reactive Fe is extensively sulfidized (51–65%) in both lakes, mostly as pyrite, but also as AVS. Similarities between As, Co, Cu and Ni to Fe ratios in pyrite and their corresponding mean diffusive flux ratios suggest that pyrite is an important sink at depth for these trace elements. High molar ratios of trace elements to Fe in pyrite from Clearwater Lake correspond chronologically to the onset of smelting activities. AVS can be an important reservoir of reactive As, Cd and Ni and, to a lesser extent, of Co, Cu and Pb. Overall, the trace elements most extensively sulfidized were Ni, Cd and As (maximum of 100%, 81% and 49% of the reactive fraction, respectively), whereas Co, Cu, Mn, Pb and Zn were only moderately sulfidized (11–16%).     

Chemical influences on trace metal-sulfide interactions in anoxic sediments

Interactions of trace metals with sulfide in anoxic environments are important in determining their chemical form and potential toxicity to organisms. In recent years, a considerable body of observational data has accumulated that indicates very different behavior for various trace metals in sulfidic sediments. These differences in behavior cannot be entirely attributed to thermodynamic relationships, but also reflect differences in ligand exchange reaction kinetics, and redox reaction pathways.Pb, Zn, and Cd, which are generally pyritized to only a few percent of the “reactive” fraction, have faster water exchange reaction kinetics than Fe²⁺, resulting in MeS phases precipitating prior to FeS formation and subsequent pyrite formation, whereas, Co and Ni, which have slower H₂O exchange kinetics than Fe²⁺, are incorporated into pyrite. Although Hg and Cu have faster reaction kinetics than Fe²⁺, both are incorporated into pyrite or leached from the pyrite fraction with nitric acid. Hg undergoes significant chloride complexation, which can retard reaction with sulfide, but can also replace Fe in FeS to form HgS, which can only be dissolved in the pyrite fraction. Cu²⁺ is reduced by sulfide and forms a variety of sulfides with and without Fe that can only be dissolved with nitric acid. Mn²⁺ does not form a MnS phase easily and is incorporated into pyrite at high iron degrees of pyritization (DOP).Oxyanions of Mo and As are first reduced by sulfide. These reduced forms may then react with sulfides resulting in incorporation into pyrite. However, the oxyanion of Cr is reduced to Cr³⁺, which is kinetically inert to reaction with sulfide and, therefore, not incorporated into pyrite.