Deformation Modulus of Fly Ash Modified with Lime and Gypsum

Deformation modulus of fly ash is one of the most important mechanical properties generally used in different design problems and also as an input parameter to sophisticated numerical techniques employed to assess the response of different structures resting on fly ash fill or embankment made of fly ash. Deformation modulus is usually expressed in terms of compressive strength. This paper presents the deformation modulus of fly ash modified with lime alone or in combination with gypsum at different strain levels. The values of deformation modulus obtained from both unconfined compression test and unconsolidated undrained triaxial test results are presented herein. The specimens for unconfined compression test and for undrained triaxial tests were cured up to 90 and 28 days, respectively. The effects of addition of lime (4–10%) and gypsum (0.5 and 1.0%) on the deformation modulus of class F fly ash are highlighted. With addition of lime and gypsum, the class F fly ash achieved the deformation modulus in the range of 190 MPa in UCS test and up to 300 MPa in triaxial test specimens tested under all round pressure of 0.4 MPa. Based on the present test results empirical relationships are developed to estimate deformation modulus of modified fly ash from unconfined compressive strength and relationships between initial tangent modulus and secant modulus at different strain levels are also developed.     

Reduction of Expansive Index,Swelling and Compression Behavior of Kaolinite and Bentonite Clay with Sand and Class C Fly Ash

Swelling behavior of expansive soil has always created problems in the field of geotechnical engineering. Generally, the method used to assess the swelling potential of expansive soil from its plasticity index, shrinkage limit and colloidal content. Alternative way to evaluate swelling behavior is from its expansive index (EI) and swelling pressure value. The present study investigates the reduction of EI and swelling pressure for kaolinite and bentonite clay when mixed with various percentages of Ottawa sand and Class C fly ash. The percentages of Ottawa sand and Class C fly ash used were 0–50 % by weight. The results show that there is a significant reduction in the swelling properties of expansive soil with the addition of Ottawa sand and Class C fly ash. The reduction in EI ranged approximately from 10 to 50 and 4 to 49 % for kaolinite and bentonite clay, respectively. Also the maximum swelling pressure of kaolinite and bentonite clay decreased approximately 93 and 64 %, respectively with the addition of various percentages of Ottawa sand and Class C fly ash. Standard index properties test viz., liquid limit, plastic limit and linear shrinkage test were conducted to see the characteristics of expansive soil when mixed with less expansive sand and fly ash. Also, for these expansive soils one dimensional consolidation test have been conducted with sand and fly ash mixtures and the results were compared with pure kaolinite and bentonite clay.     

Consolidation and Drainage Characteristics of Expansive Soil Stabilized with Fly Ash and Dolochar

Expansive soils undergo alternate swelling and shrinkage due to cyclic wetting and drying when left to nature. This property of Expansive soil affects its strength and stiffness characteristics thereby causing damage and distress to structures built on them. Industrial wastes can be added scientifically to these soils in modifying and reducing their swelling and shrinkage behaviour and increasing their strength and stiffness. In this technical article, an attempt has been made to study the compressibility and drainage characteristics of these soils using economic and ecofriendly industrial wastes such as Fly Ash and Dolochar as stabilizers. This paper also focuses on many other improved engineering properties of base soil like liquid limit, plasticity index, differential free swell, compaction and consolidation characteristics of Expansive (BC) soil stabilized with Fly Ash and Dolochar in different proportions. The virgin Expansive soil has been collected from eastern part of India (Odisha) and different percentages of Fly Ash (5, 10, 15, 20, 25 and 30 %) and Dolochar (5, 10, 15, 20, 25 and 30 %) were added to it, to predict the influence of these additives on compaction and consolidation characteristics of Expansive soil. Addition of both Fly Ash and Dolochar were found to decrease the index properties such as liquid limit, plastic limit, plasticity index, swelling index and enhancing the consolidation as well as drainage characteristics of Expansive soil. However, the maximum dry density of soil was found to decrease with addition of Fly Ash and increase with addition of Dolochar.     

Studies on Hydraulic Conductivity of Fly Ash-Stabilised Expansive Clay Liners

Earthen barriers or clay liners are a major concern in geo-environmental engineering. They are designed to preclude or reduce leachate migration. Hence, a low hydraulic conductivity (k) is an important parameter in the design of clay liners. Materials such as bentonite and lateritic clays, which have a low hydraulic conductivity at high dry densities, are used in the construction of clay liners. Compacted expansive clays which are high in montmorillonite content also have a very low hydraulic conductivity. When expansive clays are blended with fly ash, an industrial waste, the hydraulic conductivity further reduces as the ash-clay blends result in increased dry densities at increased fly ash contents. Hence, fly ash-stabilised expansive clay can also be proposed as an innovative clay liner material. It is, therefore, required to study various physical and engineering properties of this new clay liner material. Liquid limit (LL) and free swell index (FSI) are important index properties to be studied in the case of this clay liner material. The hydraulic conductivity of this new clay liner material depends on the fly ash content in the blend. Further, parameters such as solute concentration and kinematic viscosity also influence hydraulic conductivity of clay liners. This paper presents experimental results obtained on hydraulic conductivity (k) of fly ash-stabilised expansive clay liner at varying fly ash content and solute concentration. The tests were performed with deionised water (DIW), CaCl₂, NaCl and KCl as permeating fluids. Fly ash content in the blend was varied as 0, 10, 20 and 30 % by weight of the expansive clay, and the solute concentration was varied as 5 mM (milli molar), 10, 20, 50, 100 and 500. It was found that hydraulic conductivity (k) decreased with increasing fly ash content, solute concentration and kinematic viscosity. Further, hydraulic conductivity (k) was correlated with LL and FSI of the clay liner material for different fly ash contents and solute concentrations. Useful correlations were obtained.     

Effect of Fly Ash and Rice Husk Ash on Index and Engineering Properties of Expansive Clays

Many innovative ameliorating techniques including chemical stabilization have been in practice for improving the behaviour of problematic, highly expansive clays. This paper presents a comparative study on the effect of fly ash (FA) and rice husk ash (RHA) on index and engineering properties of an expansive clay. Liquid limit (LL), plastic limit, plasticity index (PI) and free swell index (FSI), and coefficient of permeability (k), unconfined compressive strength and swelling pressure were determined at varying quantities of FA and RHA. Coefficient of permeability, swelling pressure and unconfined compressive strength of the FA-clay and the RHA-clay blends were determined at their respective OMC and MDD obtained from Proctor compaction tests. LL, PI and FSI decreased significantly with increasing FA and RHA contents. Coefficient of permeability, however, increased with additive content. Further, swelling pressure of the blends decreased with increasing additive content.     

Stabilization of a Clayey Soil with Fly Ash and Lime: A Micro Level Investigation

Pavement structures on poor soil sub grades show early distresses causing the premature failure of the pavement. Clayey soils usually have the potential to demonstrate undesirable engineering behavior, such as low bearing capacity, high shrinkage and swell characteristics and high moisture susceptibility. Stabilization of these soils is a usual practice for improving the strength. This study reports the improvement in the strength of a locally available cohesive soil by addition of both fly ash and lime. Analysis using X-ray diffraction, scanning electron microscopy, coupled with energy dispersive spectroscopy, thermal gravimetric analysis, zeta potential and pH value test was carried out in order to elucidate the stabilization mechanism. The micro level analysis confirmed the breaking of montmorrillonite structure present in the untreated clay after stabilization. In the analysis, it was also confirmed that in the stabilization process, pozzolanic reaction dominated over the cation exchange capacity.     

Efficacy of Cement-stabilized Fly Ash Cushion in Arresting Heave of Expansive Soils

Expansive clays swell and shrink seasonally when subjected to changes in the moisture regime causing substantial distress to the structures built in them. Techniques like sand cushion and cohesive non-swelling soil (CNS) layer have been tried to arrest heave and consequent damages to structures. Sand cushion has been proved to be counter-productive. Studies have indicated that even though CNS layer was effective initially, it became less effective after the first cycle of swelling and shrinkage. Research carried out by the authors, using cement-stabilized fly ash as a cushioning material, has shown that it was quite effective in arresting heave. Fly ash cushion, stabilized with 10% cement with thickness equal to that of the expansive soil bed reduces heave by about 75% in the first instance. With subsequent swell-shrink cycles, the performance further improves, unlike in the case of a black cotton soil provided with a CNS cushion. At the end of fourth cycle of swelling, the reduction in the amount of heave is as high as 99.1%.     

Use of Sewage Sludge Ash and Hydrated Lime to Improve the Engineering Properties of Clayey Soils

Using various additives has been considered as one of the most common stabilization methods for improvement of engineering properties of fine-grained soils. In this research the effect of sewage sludge ash (SSA) and hydrated lime (HL) on compressive strength of clayey soil was investigated. For this purpose, 16 kinds of mixtures or treatments were made by adding different amounts of SSA; 0, 5, 10 and 15% by weight and HL; 0, 1, 3 and 5% by weight of a clayey soil. First, compaction characteristics of the treatments were determined using Harvard compaction test apparatus. So that, 12 unconfined compressive strength test specimens were made using Harvard compaction mold from each treatments taking into account four different curing ages, including 7, 14, 28 and 90 days in three replications. Therefore, a total of 192 specimens were prepared and subjected to unconfined compressive strength tests. The results of this study showed that the maximum dry density of the treated soil samples decreases and their optimum water content increases by increasing the amount of SSA and hydrated lime in the mixtures. It is also found that the adding of HL and SSA individually would increase the compressive strength up to 3.8 and 1.5 times respectively. The application of HL and SSA with together could increases the compressive strength of a clayey soil more efficiently even up to 5 times.     

Crystalline and Osmotic Swelling of an Expansive Clay Inundated with Sodium Chloride Solutions

Compacted expansive clays swell due to crystalline swelling and osmotic/double layer swelling mechanisms. Crystalline swelling is driven by adsorption of water molecules at clay particle surfaces that occurs at inter-layer separations of 10–22 Å. Diffuse double layer swelling occurs at inter-layer separations >22 Å. The tendency of compacted clay to develop osmotic or double layer swelling reduces with increase in solute concentration in bulk solution. This study examines the consequence of increase in solute concentration in bulk solution on the relative magnitudes of the two swelling modes. The objective is achieved by inundating compacted expansive clay specimens with distilled water and sodium chloride solutions in free-swell oedometer tests and comparing the experimental swell with predictions from Van’t Hoff equation. The results of the study indicate that swell potential of compacted expansive clay specimens wetted with relatively saline (0.4, 1 and 4 M sodium chloride) solutions are satisfied by crystalline swelling alone. Comparatively, compacted clay specimens inundated with less saline solutions (0.005–0.1 M sodium chloride) require both crystalline and osmotic swelling to satiate the swell potential.     

Kerman Clay Improvement by Lime and Bentonite to Be Used as Materials of Landfill Liner

Kerman province, located in the south eastern Iran, is dominated with clays which can be used in different projects. The liner system within a landfill is constructed to control leachate migration and can be constructed by low permeable natural soils or plastic lining materials, environmentally however, natural materials is preferred that usually need to be amended in order to meet requirements recommended by environmental agencies. This research examines the possibility of using the Kerman collapsible clay as a liner layer material. A set of laboratory test was conducted on pure soil samples and additive treated samples. The moderate collapse potential of the used soil is decreased with wet compaction and under the effect of additive-soil reactions. Laboratory investigations showed that lime and bentonite treatment improved the hydraulic conductivity. The results revealed hydraulic conductivities on the order of 10^?8 m/s. The obtained values met the 1.0E?07 m/s criterion required by Iranian standards. Unconfined compression tests were also performed on pure soil and additive amended samples. The unconfined compression strength values demonstrated gradual decreases with the addition of bentonite and considerable increases with adding lime such that with adding 1% lime the unconfined compression strength increased by 75%. This study verified that the Kerman collapsing clay can be used as a liner material using lime and bentonite as additives.     

高活性粉煤灰注浆材料的防渗特性及 在帷幕灌浆工程中的应用

高活性粉煤灰注浆材料与普通水泥注浆相比较,具有颗粒细、渗透性好、结石率高,强度可靠,耐久性好,成本低等优点,适用于岩土工程的防渗加固处理。实践证明,高活性粉煤灰注浆材料用于水库在坝的帷幕灌浆有较好的防渗抗渗效果,能显著提高坝基的防渗质量,是一种较为理想的防渗注浆材料。     

Improvement of Clayey Soil with Lime and Industrial Sludge

Industrial waste generation has reached up to millions of tons yearly. One way to solve the problems of the large accumulating amount of waste could be to incorporate it into the soil; thus, finding a way for the use of industrial waste could be a quest for soil improvement studies. Industrial sludge in certain pozzolanic form reacts with soil and possesses cementitious properties. This paper illustrates the utilization of lime, steel and copper sludge in improvement of high plasticity clayey soil. The influence of stabilizer type, different curing times and various ratios of lime to sludge are evaluated by Atterberg limits, standard proctor compaction, unconfined compressive strength and unconsolidated undrained strength in triaxial test. The  test results show that adding lime and sludge results in an increase in maximum strength. Moreover, the strength of soil increases with the increase of curing time. Utilizing stabilizers also influences plasticity index and compaction parameters. Finally, the results demonstrate that steel sludge has better performance than that of copper sludge in term of strength development.     

Osmotic Swelling and Osmotic Consolidation Behaviour of Compacted Expansive Clay

Compacted clay soils are used as barriers in geoenvironmental engineering applications and are likely to be exposed to salinization and desalinization cycles during life of the facility. Changes in pore fluid composition from salinization and desalinization cycles induce osmotic suction gradients between soil–water and reservoir (example, landfill/brine pond) solution. Dissipation of osmotic suction gradients may induce osmotic swelling and consolidation strains. This paper examines the osmotic swelling and consolidation behaviour of compacted clays exposed to salinization and desalinization cycles at consolidation pressure of 200 kPa in oedometer assemblies. During salinization cycle, sodium ions of reservoir fluid replaced the divalent exchangeable cations. The osmotic swelling strain developed during first desalinization cycle was 29-fold higher than matric suction induced swelling strain of the compacted specimen. Further, the diffusion controlled osmotic swelling strain was 100-fold slower than matric suction-driven swelling process. After establishment of ion-exchange equilibrium, saturated saline specimens develop reversible osmotic swelling strains on exposure to desalinization cycles. Likewise the saturated desalinated specimen develops reversible osmotic consolidation strains on exposure to cycles of salinization. Variations in compaction dry density has a bearing on the osmotic swelling and consolidation strains, while, compaction water content had no bearing on the osmotic volumetric strains.     

纤维对石灰改良膨胀土性质的影响分析

首先对膨胀土基本性质做了试验分析,通过天然膨胀土和掺人纤维前后的石灰土的击实试验,得出了掺人少量纤维对石灰土的最优含水率和最大干密度影响很小.通过有荷膨胀率试验,得出了纤维能够抑制石灰土的膨胀性,纤维掺人量在0.05%～0.1%之间时,线膨胀率随纤维掺人量的增多而降低显著,在0.1%～0.2%之间时降低幅度减小.由无侧...     

粉煤灰矿物学资源属性和环境属性

粉煤灰一直被认为是固体废物,其资源属性和环境属性未能得到认可。本文从矿物资源角度,将粉煤灰"传统"的固体废物概念转变到"非传统"的矿物资源上来,提出了粉煤灰的矿物学资源属性和环境属性,探讨了它作为矿物资源在建材、化工和农业等领域的应用,阐明其环境属性。粉煤灰的环境效应体现在对陆地生态系统和水生生态系统影响与危害。然而,粉煤灰在治理环境污染和保护生态方面也有着积极的作用,如处理废水、烟气脱硫和合成环境功能材料等。     

赤泥—粉煤灰微晶玻璃的制备研究

利用中州铝厂固体废弃物赤泥、粉煤灰、碱渣等为主要原料,讨论利用烧结法制备建筑装饰材料微晶玻璃的可能性。借助XRD、DTA、SEM等实验研究手段,对废渣微晶玻璃组成、主晶相确定、原料选定等问题进行研究。结果表明:玻璃组成为:w(SiO2)35%~40%、w(Al2O3)10%~18%、w(CaO)13%~23%、w(MgO)3%~4%、w(K2O Na2O)4%~9%,可合成价格低廉、性能优异的微晶玻璃。     

Geotechnical Properties of Low Calcium and High Calcium Fly Ash

In this paper, a comparative study has been made for physical and engineering properties of low calcium and high calcium Indian fly ash. The grain size distribution of fly ash is independent of lime content. Fly ash particles of size >75 μm are mostly irregular in shape whereas finer fractions are spherical for low calcium fly ash. For high calcium fly ash, chemical and mineralogical differences have been observed for different size fractions. Compared to low calcium fly ash, optimum moisture content is low and maximum dry density is high for high calcium fly ash. Optimum moisture content is directly proportional and maximum dry density is inversely proportional to the carbon content. The mode and duration of curing have significant effect on strength and stress–strain behavior of compacted fly ash. The gain in strength with time for high calcium fly ash is very high compared to that of low calcium fly ash due to presence of reactive minerals and glassy phase.     

Performance of Counterfort Walls with Reinforced Granular and Fly Ash Backfills: Experimental Investigation

Experimental investigations on model counterfort retaining walls have been carried out to study the lateral movement of the walls and the nature of the failure modes. Mild steel plates of size 1,000 × 900 × 8 mm were used as model retaining walls and were placed in a tank of size 900 × 900 × 670 mm. Ennore sand, obtained from Madras India, and Fly ash, obtained from Panki Thermal Power Plant, India were used as backfill material. Tests were carried out both with and without reinforced backfill. Two types of loading conditions were applied: (i) line load and (ii) uniform surcharge. The shape and size of the failure wedge was studied by observing displacement of bands of colored through a Perspex plate fixed on one side of the tank. Plots of overturning moment against the rotation of a wall top show that with the increase in rotation of wall, the overturning moment decreases. The minimum value of overturning moment is taken as the limiting value. The failure surfaces obtained in different cases are linear and parabolic in shape.     

Evaluation of Strength Characteristics of Tropical Black Clay Treated with Locust Bean Waste Ash

An expansive tropical black clay (also known as black cotton soil because the cotton plant thrives well on it) was treated with up to 15 % locust bean waste ash (LBWA) to assess its soil improvement potential. Samples were subjected to index, compaction using three energy levels (British Standard light, BSL, West African Standard, WAS or ‘Intermediate’ and British Standard heavy, BSH), shear strength (unconfined compressive strength, UCS), California bearing ratio, CBR and durability tests. Results obtained show that the natural soil is not suitable for road construction. The maximum dry density (MDD) and optimum moisture content (OMC) decreased and increased, respectively. Regardless of the compactive effort and curing period, strength and durability properties increased with higher LBWA content with the BSL effort recording the best improvement. However, based on durability results, the optimal 12.5 % LBWA treatment of black cotton soil did not satisfy criteria for its use in road construction as a stand alone additive. Also, significant improvement in soil properties was obtained using the BSL compactive effort, which is easily achieved in the field. The benefits of the application include reduction in the cost of soil improvement and the adverse environmental impact of locust bean waste.