Hydrodynamic response of a pneumatic floating platform

This paper describes a numerical approach to model the dynamic response of a pneumatic floating platform, and the laboratory experiments and parametric study to verify the numerical results. The pneumatic platform is composed of an array of open-bottom vertical cylinders trapping pressurized air that displaces the water. The cylinder diameter is assumed to be small compared to the wavelength and the water inside each cylinder oscillates as a piston. These assumptions simplify the mathematical formulation in that the bottom of the platform can be treated as a continuous surface on which the source distribution method can be applied. In the laboratory experiments, the compressibility and displacement of the trapped air are modeled by a spring and float assembly. The comparison between the numerical and experimental results indicates favorable agreement. The oscillation of the water columns and the overall dynamic characteristics of the platform are illustrated and discussed in the parametric study.     

张力腿平台筋腱支撑浮筒结构设计研究

在张力腿平台筋腱与海底桩基连接后,需要筋腱支撑浮筒为筋腱提供足够的浮力,保证筋腱在平台运抵工作海域之前不会发生倾覆。针对南海油田自主研发的张力腿平台筋腱实际尺寸及设计要求,设计了适用于1 061 mm(40英寸)筋腱、500米水深的张力腿平台筋腱支撑浮筒,并对筋腱支撑浮筒主要受力进行了分析计算,根据所计算的载荷情况对关键部件进行了有限元仿真分析,验证了结构强度的可靠性,并得到了结构的应力集中点与最大变形点,为筋腱支撑浮筒的结构设计提供了参考。     

深海立柱式平台概念设计研究

以上海交通大学海洋工程国家重点实验室提出的多柱桁架式立柱平台(Cell-Truss Spar)概念为例,对Spar平台的概念设计方法和过程进行了初步的研究,并对其水动力性能进行理论和数值计算,分析一些影响Spar平台运动性能的参数。设计涉及到两方面的问题:一是设计方法、流程以及结构物的形式;二是水动力性能。整个设计流程是一个不断循环的交互式的过程,需要考虑很多方面因素的影响。     

在平台振荡条件下TLP张力腿的涡激非线性响应

给出了预测张力腿涡激横向振动的时域分析,考虑了波浪、海流、张力腿平台的横漂与垂荡诸因素.张力腿平台的垂荡引起张力周期性变化,对张力腿的涡激横向振动起参数激励的作用,使其动力响应更为复杂.讨论了参数激励下涡激响应的共振条件;以尾流振子模型为基础,发展了分析张力腿在动张力作用下的涡激振动的工程方法,并分析了一座TLP实例,给出了在横漂周期内张力腿上质点的相对位移、弯矩、剪力幅值的时间历程.结果表明,平台垂荡使张力腿的涡激响应幅值升高、高频成分增加,因此它对张力腿的疲劳设计是重要的.     

Availability of offloading from an LNG barge

Long-term data sets are discussed for three locations – a southern North Sea location, where sea states are typically dominated by wind-sea conditions, a Northwest Shelf of Australia location, where sea states are often a mix of wind-sea and swell conditions, and a Guinea Gulf location offshore Nigeria, where sea states are dominated by swell. Various types of sea state statistics that have application to availability studies are presented; but databases of these type that also include wind and current data can also be used to estimate response parameters, which can give a more direct assessment of availability, and some example statistics of these are also given. Finally, the availability of offloading an FLNG barge to carrier is evaluated for each of the data sets, for specific operability criteria. Two types of operability criteria are used in the availability evaluations, and the results compared.     

半潜式钻井平台复合锚泊系统组分配比优化设计

从提高锚泊系统收放时效性入手,提出了一种半潜式钻井平台复合式锚泊系统组分配比优化设计方法,旨在尽可能降低复合式锚泊系统的钢链配比长度,提高收放效率。结合锚泊系统设计参数,制定优化设计准则,建立优化分析流程,采用ANSYS-AQWA建立锚泊定位半潜式平台水动力分析模型,获得平台运动参数和锚链动力参数,对平台漂移量、锚链最小安全系数、走锚临界张力、锚链最小卧底长度和起锚力进行无量纲指标分析,并综合考虑张力倾角与预张力对优化结果的影响,获得复合式锚泊系统钢链与钢缆的最优配比关系,确定最优钢链长度为395 m,较原钢链长度缩短225 m,钢链收放时间降低36%,进一步提高锚泊系统收放时效性,并降低平台可变荷载。     

Hydrodynamic interactions and relative motions of two floating platforms with mooring lines in side-by-side offloading operation

The hydrodynamic interaction and mechanical coupling effects of two floating platforms connected by elastic lines are investigated by using a time-domain multi-hull/mooring/riser coupled dynamics analysis program. Particular attention is paid to the contribution of off-diagonal hydrodynamic interaction terms on the relative motions during side-by-side offloading operation. In this regard, the exact method (CMM: combined matrix method) including all the vessel and line dynamics, and the 12×12 hydrodynamic coefficients in a combined matrix is developed. The performance of two typical approximation methods (NHI/No Hydrodynamic Interaction: iteration method between two vessels without considering hydrodynamic interaction effects; SMM/Separated Matrix Method: iteration method between two vessels with partially considering hydrodynamic interaction effects, i.e. ignoring off-diagonal cross-coupling terms in the 12×12 hydrodynamic coefficient matrix) is also tested for the same side-by-side offloading operation in two different environmental conditions. The numerical examples show that there exists significant discrepancy at sway and roll modes between the exact and the approximation methods, which means that the cross-coupling (off-diagonal block) terms of the full hydrodynamic coefficient matrix play an important role in the case of side-by-side offloading operation. Therefore, such approximation methods should be used with care. The fender reaction forces, which exhibit large force with contact but no force without contact, are also numerically modeled in the present time-domain simulation study.     

张力腿平台水下丛式井口圆形布局方法研究

张力腿平台(TLP)水下丛式井口布局设计关系到立管服役期间的安全性,是含有丛式井口平台设计过程中考虑的主要因素。根据TLP立管安装、钻井以及防碰等要求,考虑尾流效应对丛式立管的影响,研究水下丛式井口布局设计准则,对丛式井口—立管系统进行碰撞分析以确定水下井口间距阈值,提出水下丛式井口圆形布局方法和相应的布局设计流程。通过算例对计算方法进行了具体运用。研究表明:与目前采用的"等边三角形网格"方法相比,水下丛式井口圆形布局方法可允许水下整体基盘安装位置误差达到水下井口间距阈值的20%,立管的最大倾角可达到0.5°,安装作业窗口增加1倍以上。本方法对水下整体基盘安装位置误差的容错能力强,能有效扩大丛式立管钻井和安装作业窗口,提高丛式立管作业安全性,研究结果可为TLP丛式井口的设计提供参考。     

固定式海洋平台结构风险设计方法综述

海洋平台的结构设计中主要考虑海洋环境和工作荷载作用,但近年来事故荷载的影响日益引起设计者关注。在此背景下,以固定式导管架平台结构为目标,综述当前针对事故荷载的风险设计方法的应用现状。首先论述在事故极限状态设计中应用风险分析的必要性;随后综述通用规范,如NORSOK、DNV、API等规范系列中对风险分析方法的使用现状,包括风险决策的不同层次、安全标准的各类形式,重在分析各类规范相关规定的异同,探讨各类方法的适用性;最后结合我国现状,论述若针对事故荷载编制基于风险方法的设计规范,目前尚存的问题,以及解决途径。     

深吃水半潜式储油生产平台结构设计分析

以陵水17-2气田群开发为例,介绍具有储油和外输功能的半潜式平台在结构设计分析中的基本流程与方法。半潜式生产平台的结构设计分析流程为舱室划分、结构尺度规划设计、总体结构分析和关键连接部位的局部结构分析及特殊情况的结构分析。由于平台的储油和外输功能,平台设计压头和舱室布置等均与常规半潜式生产平台存在一定的特殊性。通过对流程和方法介绍,展现了各阶段设计中的具体方法和相应的特殊性。结果显示,通过特殊的舱室划分形式、结构设计和腐蚀余量考虑,平台结构能够满足储油和外输功能的要求。     

Hydrodynamic characteristics of a lunate shape oscillating propulsor

Research was conducted to study the hydrodynamic efficiency of a foil with aft-swept wing tips. A potential flow based time domain panel method was formulated to predict the performance of a lunate and rectangular foil in large amplitude, unsteady motion. Skin drag was approximated and boundary layer growth and separation were also estimated. Hydrodynamic efficiency was evaluated in terms of propulsive efficiency and thrust coefficient of the foil. Results are presented for a lunate shaped planform and for a rectangular foil. Predictions show that the lunate shaped planform has a substantially higher propulsive efficiency (13% higher) than the rectangular foil under heavy load conditions when the feathering parameter is zero, throughout a range of reduced frequencies (0.2 to 1.8). Under a medium load condition, however, the rectangular foil gave a higher propulsive efficiency at reduced frequencies less than 0.5 and the same efficiency value at a reduced frequency of 1.8. For a practical range of reduced frequencies between 0.5 and 1.0, the lunate tail gave higher propulsive efficiency. The lunate planform gave a lower thrust coefficient at a heavy load and higher thrust at a medium load condition than the rectangular planform for all reduced frequencies.     

一种新型半潜式平台概念设计研究

在详细研究影响平台综合性能的诸多因素基础上,克服现有半潜式平台存在的不足,结合自升式平台甲板可以自由升降的优点,开发了具有自主知识产权的自升式半潜多功能深海浮式（JCSM）平台。JCSM平台结合了自升式平台与半潜式平台的优势,并以平台综合性能的提升为目标进行了细节上的优化,稳性裕度大且运动性能优良,可适应干式采油、湿式采油和干湿组合式采油等不同采油模式,并同时具有钻井、早期生产、修井、油气处理与油气储运等多种功能。在详述JCSM平台的组成及性能特点的基础上,对JCSM平台进行了稳性与运动性能数值分析,并与传统半潜式平台相比较,验证了所研发新型平台性能的优越性。研究为未来海洋油气田开发提供了一种新的选择,并对全新概念的浮式平台开发有借鉴和指导意义。     

一种波浪能实验装置水动力学分析与优化设计

将造波水槽内二维浮体牵引弹簧回复液压缸的受力系统简化为弹簧—质量—阻尼器系统,建立数学模型,并根据牛顿第二定律得到运动方程式。采用基于简单格林函数的边界元方法对所研究浮体的水动力学系数和波浪力进行计算,对于施加给液压系统的不同外部阻尼值,由运动方程可得到相应的浮体垂荡运动位移。为求浮体对液压系统做功的最大值,在给定条件下着重对外部阻尼系数进行了优化。     

Estimating the hydrodynamic forces on a mini TLP with computational fluid dynamics and design-code techniques

This paper reports on the prediction of the hydrodynamic forces on a full-scale mini Tension Leg Platform (TLP) of the type typically deployed for deep-sea operation. Two alternative prediction techniques were used: Computational Fluid Dynamics (CFD), which is based on the solution of the fundamental equations that govern turbulent fluid flow; and ‘engineering’ calculations based on force coefficients derived from a design code that is in routine use in the Offshore Industry. The results from these two techniques were compared with each other and with experimental data obtained from wind-tunnel and towing-tank tests on a 1–70 scale model. It was found that the two techniques, while yielding very similar predictions for the front TLP members, give substantially different predictions for the aft members — a result that is consistent with the presence of significant interference effects that are captured only by the CFD. The design code yielded the highest value for the global drag coefficient, followed very closely by the towing-tank result. The wind-tunnel tests produced the lowest value for this parameter. The CFD predictions, which were the first to be obtained in this study, fall in the mid-range of the experimental values. These and other results are discussed in the context of the use of CFD in practical design applications.     

Hydrodynamic behavior of a straight floating pipe under wave conditions

This paper examines the hydrodynamic behavior of a floating straight pipe under wave conditions. The main problem in calculating the forces acting on a small-sized floating structure is obtaining the correct force coefficients C_n and C_t, which differ from a submerged structure. For a floating straight pipe of small size, we simplify it into a 2D problem, where the pipe is set symmetrically under wave conditions. The force equations were deduced under wave conditions and a specific method proposed to resolve the wave forces acting on a straight floating pipe. Results of the numerical method were compared to those from model tests and the effects of C_n and C_t on numerical results studied. Suggestions for the selection of correct C_n and C_t values in calculating wave forces on a straight floating pipe are given. The results are valuable for research into the hydrodynamic behavior of the gravity cage system.     

新型多立柱式Spar平台涡激运动特性研究

通过数值模拟和模型试验方法对一新型的Spar平台——多立柱式Spar平台的涡激运动特性进行研究。平台硬舱为四根圆柱方形阵列布置加方形中心井的形式,各柱间会产生复杂的相互干扰,不同于常规的单立柱Spar平台或半潜式平台,因此对其开展相应的涡激运动研究具有重要意义。研究主要关注的是不同来流角、不同流速下平台的涡激运动特性。通过涡激运动时的横荡运动、水平面内运动轨迹、首摇运动和水动力系数及绕流流场的分析,可得:在折合速度约为6~8范围内,平台横荡运动存在明显的“锁定”现象(0°来流角无侧板时“锁定”范围约为Ur=7~10)。在0°来流角下较高流速时,减涡侧板对涡激运动有明显的抑制效果。平台的运动轨迹近似与平台硬舱截面的对角线平行(0°来流角除外),这不同于常规的单立柱Spar平台。此外,试验中还观察到较明显的首摇运动。涡激运动时各柱间绕流存在复杂的相互干扰,而在柱后形成共同的涡结构。     

智能优化平台在等效水深截断系统设计中应用

构建一个智能优化平台,包括粒子群算法、蚁群算法、遗传算法、模拟退火算法、混沌算法和复合形法。该平台包括四个模块,分别是优化问题选择,优化参数设置,优化过程显示以及优化结果输出。将该优化平台应用在等效水深截断系统的优化设计中,对截断系泊系统的构造参数进行优化,能在很短时间内给出符合海洋工程需要的等效水深截断系泊系统。     

Hydrodynamic shape optimization of thin floating plates

In this work, the problem of optimizing the shape of a thin floating plate (sometimes called a dock) to maximize radiation damping is investigated. The plate is modeled with zero draft and floats on the surface of an irrotational, incompressible ocean of infinite extent. For simplicity, only rigid heave motions are considered. The flow problem is analyzed using the Chen and Mei variational principle wherein the potential field inside a hemisphere surrounding the plate is represented using a spherical harmonic expansion and matched on the hemisphere to an outer field described by distributing sources on the hemisphere. The plate shape is parameterized using a Fourier series which is suitable for use with the variational principle. Gradients of the damping coefficient with respect to the shape parameters are developed by solving an adjoint flow problem whose potential is shown to be a scalar multiple of the original flow potential. Optimal plate shapes are determined using the well-known optimization code NPSOL which makes use of the damping coefficient calculation and gradients.     

旅游海滩管理云平台的研究与设计

基于ArcGIS Online一体化云平台,将旅游海滩管理与web GIS相结合,并以海南省旅游海滩为例进行实现。本文设计了五大管理内容,包括浴场安全管理、海滩卫生管理、海滩空间管理、海滩生态管理和海滩动态管理,并阐述了旅游海滩管理云平台的设计和建设。该云平台借助信息化手段为海滩管理部门提供辅助决策,以提高管理工作的效率,并提供一种海滩信息存储与服务云端化的新思路,推动旅游海滩管理的数字化进程。     

Hydrodynamic coefficients of a submerged pulsating sphere in finite depth

By extending the work of Linton (Linton, C.M., 1991. Radiation and diffraction of waver waves by a submerged sphere in finite depth. Ocean Engineering 18 (1/2), 61–74), the problem of radiation of water waves by a submerged pulsating sphere in finite depth is formulated using the multipole method. As in Linton (1991), this leads to an infinite system of linear equations, which are easily solved numerically. Simple expressions are derived for the hydrodynamic characteristics of such a body. Results showing the effect of varying both the immersion depth and the water depth on the hydrodynamic coefficients of the pulsating sphere are given. The paper resumes the work presented in Lopes (Lopes, D.B.S., 1999. On the study of the Archimedes wave swing device for wave energy utilization (in Portuguese). MSc on the Management and Modelling of the Marine Environment, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa.).