The distribution and utility of sea‐level indicators in Eurasian sub‐Arctic salt marshes (White Sea,Russia)

In support of efforts to reconstruct relative sea level (RSL), we investigated the utility of foraminifera, diatoms and bulk‐sediment geochemistry (δ¹³C, C:N and parameters measured by Rock‐Eval pyrolysis) as sea‐level indicators in Eurasian sub‐Arctic salt marshes. At three salt marshes (<15 km apart) in Dvina Bay (White Sea, Russia), we collected surface sediment samples along transects from subtidal to Taiga forest environments. Foraminifera at all sites formed bipartite assemblages, where elevations below mean high higher water (MHHW) were dominated by Miliammina spp. and elevations between MHHW and the highest occurrence of foraminifera were dominated by Jadammina macrescens and Balticammina pseudomacrescens. Five high‐diversity groups of diatoms were identified and they displayed pronounced variability amongst the study sites. Bulk‐sediment geochemistry recognized two groups (clastic‐dominated environments below MHHW and organic‐rich environments above MHHW). As one group included subtidal elevations and the other included supratidal elevations, we conclude that the measured geochemical parameters are not stand‐alone sea‐level indicators. Core JT2012 captured a regressive sediment succession of clastic, tidal‐flat sediment overlain by salt‐marsh organic silt and freshwater peat. The salt‐marsh sediment accumulated at 2804±52 years before present and preserved foraminifera (Jadammina macrescens and Balticammina pseudomacrescens) with good analogy to modern assemblages indicating that RSL was +2.60±0.47 m at this time. Diatoms confirm that marine influence decreased through time, but the lack of analogy between modern and core assemblages limited their utility as sea‐level indicators. Geochemical parameters also indicate a reduction in marine influence through time. We conclude that RSL reconstructions derived from salt‐marsh sediment preserved beneath Eurasian sub‐Arctic peatlands can provide valuable insight into the spatio‐temporal evolution of the Fennoscandian and Eurasian ice sheets.     

Changes to depositional palaeoenvironments within the Qikou depression (Bohaiwan Basin,China): carbon and oxygen isotopes in lacustrine carbonates of the Palaeogene Shahejie Formation

This paper reports the carbon and oxygen isotope compositions of lacustrine carbonate sediments from the Palaeogene Shahejie Formation, Qikou depression, Bohaiwan Basin, with the aim of determining the palaeoenvironmental conditions in the region. Results from Es₂, the second member of the Shahejie Formation, showed values of δ¹³C and δ¹⁸O from –1.2‰ to +2.4‰ (average +0.6‰) and from –6.8‰ to –4.7‰ (average –5.7‰), respectively, suggesting a relatively hot climate attending deposition. The slightly closed nature of the lake, which contains brackish water, resulted in higher carbonate δ¹³C and δ¹⁸O values than in a meteoric environment. The values of δ¹³C and δ¹⁸O preserved within the carbonates of the overlying lower Shahejie I (Es₁) varied between +1.3‰ and +4.9‰ (average +3.2‰) and from ?4.4‰ to ?1.8‰ (average ?3.1‰), respectively, indicating that the climate became colder at that time. Subsequently, a marine transgression caused the salinity of the lake water to increase. The values of δ¹³C and δ¹⁸O were controlled by salinity. The high δ¹³C values were also influenced by the rapid burial of the lake organisms and by algal photosynthesis. Values of δ¹³C and δ¹⁸O from carbonates in upper Es₁ ranged from ?8.0‰ to +11.0‰ (average +10.1‰) and from ?5.0‰ to ?1.5‰ (average ?3.4‰), respectively, indicating a slight increase in the temperature over time. In the closed and reducing environment, extremes in δ¹³C values resulted from biochemical fermentation. The positive δ¹³C excursion recorded in the carbonates of the Shahejie Formation in the Qikou depression indicates that the palaeoclimate underwent a significant transformation during the Eocene and the Oligocene.     

13C Record of benthic foraminifera in the last interglacial ocean: Implications for the carbon cycle and the global deep water circulation

The ¹³C/¹²C ratios of Upper Holocene benthic foraminiferal tests (genera Cibicides and Uvigerina) of deep sea cores from the various world ocean basins have been compared with those of the modern total carbon dioxide (TCO₂) measured during the GEOSECS program. The δ¹³C difference between benthic foraminifera and TCO₂ is 0.07 ± 0.04‰ for Cibicides and ?0.83 ± 0.07‰ for Uvigerina at the 95% confidence level. δ¹³C analyses of the benthic foraminifera that lived during the last interglaciation (isotopic substage 5e, about 120,000 yr ago) show that the bulk of the TCO₂ in the world ocean had a δ¹³C value 0.15 ± 0.12‰ lower than the modern one at the 95% confidence level, reflecting a depletion, compared to the present value, of the global organic carbon reservoir. Regional differences in δ¹³C between the various oceanic basins are explained by a pattern of deep water circulation different from the modern one: the Antarctic Bottom Water production was higher than today during the last interglaciation, but the eastward transport in the Circumpolar Deep Water was lower.     

Formation of modern dolomite in hypersaline pans of the Western Cape,South Africa

Authigenic calcite and dolomite and biogenic aragonite occur in Holocene pan sediments in a Mediterranean‐type climate on the western coastal plain of South Africa. Sediment was analysed from a Late Pleistocene coastal pan at Yzerfontein and four Holocene inland pans ranging from brackish to hypersaline. The pans are between 0·08 and 0·14 km² in size. The δ¹⁸O_PDB values of carbonate minerals in the pan sediments range from ?2·41 to 5·56‰ and indicate precipitation from evaporative waters. Covariance of total organic content and percentage carbonate minerals, and the δ¹³C_PDB values of pan carbonate minerals (?8·85 to ?1·54‰) suggest that organic matter degradation is a significant source of carbonate ions. The precipitation of the carbonate minerals, especially dolomite, appears to be mediated by sulphate‐reducing bacteria in the black sulphidic mud zone found in the brine‐type hypersaline pans. The knobbly, sub‐spherical texture of the carbonate minerals suggests that the precipitation of the carbonate minerals, particularly dolomite, is related to microbial processes. The ⁸⁷Sr/⁸⁶Sr ratios of pan carbonate minerals (0·7108 to 0·7116) are slightly higher than modern sea water and indicate a predominantly sea water (marine aerosol) source for calcium (Ca²⁺) ions with relatively minor amounts of Ca²⁺ derived from the chemical weathering of bedrock.     

'Pseudobreccias' revealed as calcrete mottling and bioturbation in the Late Dinantian of the southern Lake District, UK

Two types of ‘pseudobreccia’, one with grey and the other with brown mottle fabrics, occur in shoaling‐upward cycles of the Urswick Limestone Formation of Asbian (Late Dinantian, Carboniferous) age in the southern Lake District, UK. The grey mottle pseudobreccia occurs in cycle‐base packstones and developed after backfilling and abandonment of Thalassinoides burrow systems. Burrow infills consist of a fine to coarse crystalline microspar that has dull brown to moderate orange colours under cathodoluminescence. Mottling formed when an early diagenetic ‘aerobic decay clock’ operating on buried organic material was stopped, and sediment entered the sulphate reduction zone. This probably occurred during progradation of grainstone shoal facies, after which there was initial exposure to meteoric water. Microspar calcites then formed rapidly as a result of aragonite stabilization. The precipitation of the main meteoric cements and aragonite bioclast dissolution post‐date this stabilisation event. The brown mottle pseudobreccia fabrics are intimately associated with rhizocretions and calcrete, which developed beneath palaeokarstic surfaces capping cycle‐top grainstones and post‐date all depositional fabrics, although they may also follow primary depositional heterogeneities such as burrows. They consist of coarse, inclusion‐rich, microspar calcites that are always very dull to non‐luminescent under cathodoluminescence, sometimes with some thin bright zones. These are interpreted as capillary rise and pedogenic calcrete precipitates. The δ¹⁸O values (?5‰ to ?8‰, PDB) and the δ¹³C values (+2‰ to ?3‰, PDB) of the ‘pseudobreccias’ are lower than the estimated δ¹⁸O values (?3‰ to ?1‰ PDB) and δ¹³C values of (+2‰ to +4‰ PDB) of normal marine calcite precipitated from Late Dinantian sea water, reflecting the influence of meteoric waters and the input of organic carbon.     

Stable carbon isotopic evidence for sources of particulate organic carbon found in sea foam

Particulate organic carbon found in sea foam and water samples from North Inlet, South Carolina, were examined for their δ¹³C isotopic composition. Sea foam particulate organic carbon (POC) δ¹³C values ranged from ?20.4 to ?24.6‰ (mean=?22.3‰) and water POC δ¹³C values ranged from ?21.0 to ?28.5‰ (mean= ?24.4‰). Temporal trends in sea foam and water POC indicate that δ¹³C values for both POC components are depleted in the colder months and enriched in the warmer months. Measurement of δ¹³C from potential sources for organic matter found in sea foam, combined with data on macroalgae productivity and phytoplankton biomass, indicates that macroalgae are the principal source of POC for sea foam in the colder months. In the warmer months, phytoplankton appear to be more important contributors. The observed water POC δ¹³C values were always depleted relative to foam POC δ¹³C values. This isotopic difference may result from chemical segregation during sea foam formation or may reflect DOC δ¹³C values from terrestrial origins.     

Holocene salt‐marsh sedimentary infilling and relative sea‐level changes in West Brittany (France) using foraminifera‐based transfer functions

In order to reconstruct former sea‐levels and to better characterize the history of Holocene salt‐marsh sedimentary infillings in West Brittany (western France), local foraminifera‐based transfer functions were developed using weighted‐average‐partial‐least‐squares (WAPLS) regression, based on a modern data set of 26 and 51 surface samples obtained from salt‐marshes in the bay of Tresseny and the bay of Brest, respectively. Fifty cores were retrieved from Tresseny, Porzguen, Troaon and Arun salt‐marshes, which were litho‐ and biostratigraphically analysed in order to reconstruct palaeoenvironmental changes. A total of 26 AMS ¹⁴C age determinations were performed within the sediment successions. The Holocene evolution of salt‐marsh environments can be subdivided into four stages: (i) a development of brackish to freshwater marshes (from c. 6400 to 4500 cal. a BP); (ii) salt‐marsh formation behind gravel barriers in the bay of Brest (from 4500 to 2900 cal. a BP); (iii) salt‐marsh erosion and rapid changes of infilling dynamics due to the destruction of coastal barriers by storm events (c. 2900?2700 cal. a BP); (iv) renewed salt‐marsh deposition and small environmental changes (from 2700 cal. a BP to present). From the application of transfer functions to fossil assemblages, 14 new sea‐level index points were obtained, indicating a mean relative sea‐level rise of around 0.90±0.12 mm a^?1 since 6300 cal. a BP.     

High-precision analysis of carbon isotopic composition for individual CO2 inclusions via Raman spectroscopy to reveal the multiple-stages evolution of CO2- bearing fluids and melts

The carbon isotopic composition of CO₂ inclusions trapped in minerals reflects the origin and evolution of CO₂-bearing fluids and melts, and records the multiple-stages carbon geodynamic cycle, as CO₂ took part in various geological processes widely. However, the practical method for determination isotope composition of individual CO₂ inclusion is still lacking. Developing a microanalytical technique with spatial resolution in micrometers to precisely determinate the δ¹³C value of individual CO₂ inclusion, will make it possible to analyze a tiny portion of a zoning mineral crystal, distinguish the differences in micro-scale, and possible to find many useful information that could not be obtained with the bulk extraction and analysis techniques. In this study, we systematically collected Raman spectra of CO₂ standards with different δ¹³C values (?34.9 ‰ to 3.58 ‰) at 32.0 °C and from ～7.0 MPa to 120.0 MPa, and developed a new procedure to precisely determinate the δ¹³C value of individual CO₂ inclusion. We investigated the relationship among the Raman peak intensity ratio, δ¹³C value, and CO₂ density, and established a calibration model with high accuracy (0.5 ‰?1.5 ‰), sufficient for geological application to distinguish different source of CO₂ with varying δ¹³CO₂. As a demonstration, we measured the δ¹³C values and the density of CO₂ inclusions in the growth zones of alkali basalt-hosted corundum megacrysts from Changle, Shandong Province. We found the significant differences of density and δ¹³C between the CO₂ inclusions in the core of corundum and those inclusions in the outer growth zones, the δ¹³C value decreases from core to rim with decreasing density: δ¹³C values are from ?7.5 ‰ to ?9.2 ‰ for the inclusions in the core, indicating the corundum core was crystallized from mantle-derived magmas; from ?13.5 ‰ to ?18.5 ‰ for CO₂ inclusions in zone 1 and from ?16.5 ‰ to –22.0 ‰ for inclusions in zone 2, indicating the outer zones of corundum grew in a low δ¹³C value environment, resulted from an infilling of low δ¹³C value fluid and/or degassing of the ascending basaltic magma.     

Carbon and Oxygen Isotope Compositions of Calcite and Rhodochrosite from Geothermal Exploratory Drills TH‐4 and TH‐6 near the Toyoha Deposit,Hokkaido, Japan

We studied calcite and rhodochrosite from exploratory drill cores (TH‐4 and TH‐6) near the Toyoha deposit, southwestern Hokkaido, Japan, from the aspect of stable isotope geochemistry, together with measuring the homogenization temperatures of fluid inclusions. The alteration observed in the drill cores is classified into four zones: ore mineralized zone, mixed‐layer minerals zone, kaolin minerals zone, and propylitic zone. Calcite is widespread in all the zones except for the kaolin minerals zone. The occurrence of rhodochrosite is restricted in the ore mineralized zone associated with Fe, Mn‐rich chlorite and sulfides, the mineral assemblage of which is basically equivalent to that in the Toyoha veins. The measured δ¹⁸O_SMOW and δ¹³C_PDB values of calcite scatter in the relatively narrow ranges from ?2 to 5‰ and from ?9 to ?5‰, respectively; those of rhodochrosite from 3 to 9‰ and from ?9 to ?5‰, excluding some data with large deviations. The variation of the isotopic compositions with temperature and depth could be explained by a mixing process between a heated surface meteoric water (100°C δ¹⁸O =?12‰, δ¹³C =?10‰) and a deep high temperature water (300°C, δ¹⁸O =?5‰, δ¹³C =?4‰). Boiling was less effective in isotopic fractionation than that of mixing. The plots of δ¹⁸O and δ¹³C indicate that the carbonates precipitated from H₂CO₃‐dominated fluids under the conditions of pH = 6–7 and T = 200–300°C. The sequential precipitation from calcite to rhodochrosite in a vein brought about the disequilibrium isotopic fractionation between the two minerals. The hydrothermal fluids circulated during the precipitation of carbonates in TH‐4 and TH‐6 are similar in origin to the ore‐forming fluids pertaining to the formation of veins in the Toyoha deposit.     

Carbon and Oxygen Isotopic Composition of Surface‐Sediment Carbonate in Bosten Lake (Xinjiang,China) and its Controlling Factors

Bosten Lake is a mid-latitude lake with water mainly supplied by melting ice and snow in the Tianshan Mountains. The depositional environment of the lake is spatially not uniform due to the proximity of the major inlet and the single outlet in the western part of the lake. The analytical results show that the carbon and oxygen isotopic composition of recent lake sediments is related to this specific lacustrine depositional environment and to the resulting carbonate mineralogy. In the southwestern lake region between the Kaidu River inlet and the Kongqi River outlet, carbon isotope composition (δ13C) values of the carbonate sediment (?1‰ to ?2‰) have no relation to the oxygen isotope composition of the carbonate (δ18O) values (?7‰ to ?8‰), with both isotopes showing a low variability. The carbonate content is low (<20%). Carbonate minerals analyzed by X-ray diffraction are mainly composed of calcite, while aragonite was not recorded. The salinity of the lake water is low in the estuary region as a result of the Kaidu River inflow. In comparison, the carbon and oxygen isotope values are higher in the middle and eastern parts of the lake, with δ13C values between approximately +0.5‰ and +3‰, and δ18O values between ?1‰ and ?5‰. There is a moderate correlation between the stable oxygen and carbon isotopes, with a coefficient of correlation r of approximately 0.63. This implies that the lake water has a relatively short residence time. Carbonate minerals constitute calcite and aragonite in the middle and eastern region of the lake. Aragonite and Mg–calcite are formed at higher lake water salinity and temperatures, and larger evaporation effects. More saline lake water in the middle and eastern region of the lake and the enhanced isotopic equilibrium between water and atmospheric CO2 cause the correlating carbon and oxygen isotope values determined for aragonite and Mg–calcite. Evaporation and biological processes are the main reasons for the salinity and carbonate mineralogy influence of the surface-sediment carbonate in Bosten Lake. The lake water residence time and the CO2 exchange between the atmosphere and the water body control the carbon and oxygen isotope composition of the carbonate sediment. In addition, organic matter pollution and decomposition result in the abnormally low carbon isotope values of the lake surface-sediment carbonate.     

A reconnaissance study of stable isotope ratios in archaean rocks from the yilgarn block,Western Australia

Isotopic compositions of sulphur, carbon, and oxygen have been determined for constituents from a total of 103 samples of sedimentary rocks, mafic and ultramafic igneous rocks, nickel ores, and gold ores from the Archaean Yilgarn Block.

Sulphides in the bulk of the sedimentary rocks have δ³⁴S values close to 0‰ and appear to have precipitated from solutions which incorporated magmatic sulphur (either juvenile or derived from older rocks). There is no evidence for widespread sulphate reduction.

δ³⁴S values of sulphides in the nickel deposits and associated mafic/ultramafic igneous rocks are within the magmatic range. The small, high‐grade deposits of the Kambalda‐Nepean‐Scotia type have small positive δ³⁴S values, and the large, low‐to‐medium grade dunite‐associated deposits of the Mount Keith‐Perseverance type have small negative δ³⁴S values.

Sulphides in the Kalgoorlie gold ores are enriched in ³²S relative to those in their host dolerite, supporting an epigenetic origin for the gold, under moderately high fO₂ conditions.

The δ¹³C values do not provide unequivocal evidence for the source(s) of the reduced carbon (kerogen) in the sedimentary rocks. Whilst they are compatible with biogenic derivation, it is not possible to rule out contributions from pre‐biotic organic ‘soup’ or from hydrothermal solutions of deep‐seated origin.

Carbonate in the sedimentary rocks are predominantly in epigenetic, sulphide‐bearing veinlets. In many cases, their δ¹³C values suggest precipitation from hydro‐thermal solutions containing magmatically derived CO₂. In only two samples are the petrographic features and δ¹³C values compatible with marine carbonates. Talc‐carbonate altered ultramafic igneous rocks have δ¹³C values consistent with their incorporation of magmatically derived CO₂.

The ?δ¹³C (carbonate‐kerogen) values for most of the sedimentary rock studied fall in a narrow range around +10‰, suggesting isotopic exchange between oxidized and reduced carbon species at moderately high temperatures (>250°C).

δ¹⁸O values of carbonate from both sedimentary rocks and igneous rocks are mainly within the range +7.2‰ to +18.0‰. If the values are primary they are consistent with the formation of carbonate from hydrothermal solutions of magmatic and/or metamorphic origin. However, it is also possible the δ¹⁸O values are the result of post‐depositional equilibration with meteoric waters.     

Tracing the flow of organic matter from primary producers to filter feeders in Ria Formosa lagoon, Southern Portugal

The flow of organic matter along the main navigation channel of Ria Formosa, Portugal, was assessed using determinations of suspended particulate matter (SPM), particulate organic matter (POM), and chlorophyll a (chla) concentrations in conjunction with stable isotope values of primary producers, particulate matter, and two filter feeders. SPM in the lagoon is dominated by inorganic particles comprising 80% of total weight with organic matter averaging about 20%. The algal component of the POM averaged about 5% with the remainder comprised of detritus. The δ¹³C values of primary producers ranged from ?9.1‰ in the intertidal seagrassZostera noltii to ?30.7‰ in the red seaweedBostrychia scorpioides revealing underlying differences in the mechanisms of carbon uptake. The δ¹³C value ofB. scorpioides, which develops entangled on the salt marsh speciesSpartina maritima, suggests that its main source of inorganic carbon is atmospheric CO₂. The δ¹³C values of the high marsh macrophyteSarcocornia perennis significantly increased with distance from the ocean while δ¹³C values ofZ. noltii decreased, probably because higher decomposition of organic matter at inner stations lowers the δ¹³CO₂ value in the water. The δ¹⁵N values of Ulvales, seagrasses, and marsh plants significantly increased from outer stations to inner stations. This increase may be due either to recycling of nitrogen (N) within the marsh (with loss of light N₂ or NH₄) or to inputs of isotopically heavy N from sewage. The δ¹⁵N values of particulate matter showed an opposite trend, which indicates higher microbial degradation of organic matter at the inner lagoon. The data demonstrate that the seston in the lagoon is a mixture of detritus from lagoon primary producers with a minor contribution of microalgae. The filter feeders are most likely assimilating a mixture of phytoplankton and microphytobenthos. Digestion of lagoon seston is selective. The δ¹⁵N values of both muscle and digestive gland of filter feeders showed the opposite gradient of particulate matter indicating that the depleted δ¹⁵N of SPM at inner stations was not assimilated or even ingested. Stable isotopes values did not differ between the filter-feeders—the musselMytilus galloprovincialis collected on buoys and the clamTapes decussatus collected in the sediment—suggesting a considerable mixture of benthic-pelagic organic matter throughout the water column. Assessment of the changes in isotopic decomposition of detritus as it decays is required to refine our understanding of organic matter transfers in detrital food webs.     

Carbon and Nitrogen Isotopic,and Mineral Inclusion Studies on the Diamonds from the Pozanti‐Karsanti Chromitite,Turkey

He Pozanti‐Karsanti ophiolite (PKO) is one of the largest oceanic remnants in the Tauride belt, Turkey. Micro‐diamonds were recovered from the podiform chromitites, and these were investigated based on morphology, color, cathodoluminescence, nitrogen content, carbon and nitrogen isotopes, internal structure and inclusions. The diamonds recovered from the PKO are mainly mixed‐habit diamonds with sectors of different brightness under the cathodoluminescence images. The total δ¹³C range of the PKO diamonds ranges between ?18.8 ‰ and ?28.4 ‰, with a principle δ¹³C mode at ?25 ‰. Nitrogen contents of the diamonds range from 7 to 541 μg/g with a mean value of 171 μg/g, and the δ¹⁵N values range from ?19.1 ‰ to 16.6 ‰, with a δ¹⁵N mode of ?9 ‰. Stacking faults and partial dislocations are commonly observed in the Transmission Electron Microscopy foils whereas inclusions are rather rare. Combinations of (Ca_0.81Mn_0.19)SiO₃, NiMnCo‐alloy and nano‐size, quenched fluid phases were observed as inclusions in the PKO diamonds, confirming a natural origin of these diamonds. We believe that the δ¹³C‐depleted carbon signature of the PKO diamonds is a remnant of previously subducted crustal matter. These diamonds may have crystallized in metal‐rich melts in the asthenospheric mantle at depth below 250 km which were subsequently carried rapidly upward by asthenospheric melts/fliuds. We concluded that diamond‐bearing asthenospheric melts were likely involved in the formation of the Pozanti‐Karsanti podiform chromitite.     

Carbon and Oxygen Isotopic Compositions: How Lacustrine Environmental Factors Respond in Northwestern and Northeastern China

Surface lake sediments,28 from Hoh Xil,24 from northeastern China,99 from Lake Bosten,31 from Ulungur and 26 from Heihai were collected to determine δ13C and δ18O values.Considering the impact factors,conductivity,alkalinity,pH,TOC,C/N and carbonate-content in the sediments,Cl,P,S,and metal element ratios of Mg/Ca,Sr/Ca,Fe/Mn of bulk sediments as environmental variables enable evaluation of their influences on δ13C and δ18O using principal component analysis(PCA) method.The closure and residence time of lakes can influence the correlation between δ13C and δ18O.Lake water will change from fresh to brackish with increasing reduction and eutrophication effects.Mg/Ca in the bulk sediment indicates the characteristic of residence time,Sr/Ca and Fe/Mn infer the salinity of lakes.Carbonate formation processes and types can influence the δ13C–δ18O correlation.δ18O will be heavier from Mg-calcite and aragonite formed in a high-salinity water body than calcite formed in freshwater conditions.When carbonate content is less than 30%,there is no relationship with either δ13C or δ18O,and also none between δ13C and δ18O.More than 30%,carbonate content,however,co-varies highly to δ13C and δ18O,and there is also a high correlation between δ13C and δ18O.Vegetation conditions and primary productivity of lakes can influence the characteristics of δ13C and δ18O,and their co-variance.Total organic matter content(TOC) in the sediments is higher with more terrestrial and submerged plants infilling.In northeastern and northwestern China,when organic matter in the lake sediments comes from endogenous floating organisms and algae,the δ13C value is high.δ13C is in the range of 4‰ to 0‰ when organic matter comes mainly from floating organisms(C/N<6);in the range of 4‰ to 8‰ when organic matter comes from diatoms(C/N=6 to 8);and 8‰ to 4‰ when organic matter comes from aquatic and terrestrial plants(C/N>8).     

Geology and Isotope Geochemistry of the Yinchanggou-Qiluogou Pb-Zn Deposit, Sichuan Province, Southwest China

The Yinchanggou-Qiluogou Pb-Zn deposit,located in the western Yangtze Block,southwest China,is hosted by the Upper Sinian Dengying Formation dolostone.Ore bodies occur in the Qiluogou anticline and the NS-and NNW-trending faults.Sulfide ores mainly consist of sphalerite,pyrite,galena and calcite,with subordinate dolomite and quartz.Seventeen ore bodies have been discovered to date and they have a combined 1.0 million tons of sulfide ores with average grades of 2.27wt%Zn and 6.89wt%Pb.The δD_(H2O-SMOW) and δ~(18)O_(H2O-SMOW) values of fluid inclusions in quartz and calcite samples range from-68.9‰ to-48.7‰ and 7.3‰ to 15.9‰,respectively,suggesting that H_2O in the hydrothermal fluids sourced from metamorphic water.Calcite samples have δ~(13)C_(PDB) values ranging from-6.2‰ to-4.1‰ and δ~(18)O_(SMOW) values ranging from 15.1‰ to 17.4‰,indicating C and O in the hydrothermal fluids likely derived from a mixed source of metamorphic fluids and the host carbonates.The δ~(34)S_(CDT) values of sulfide minerals range from 5.5‰ to 20.3‰,suggesting that thermal chemical reduction of sulfate minerals in evaporates were the most probable source of S in the hydrothermal fluids.The ~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb and ~(208)Pb/~(204)Pb ratios of sulfide minerals fall in the range of 18.11 to 18.40,15.66 to 15.76 and 38.25 to 38.88,respectively.The Pb isotopic data of the studied deposit plot near the upper crust Pb evolution curve and overlap with the age-corrected Proterozoic basement rocks and the Upper Sinian Dengying Formation hosting dolostone.This indicates that the Pb originated from a mixed source of the basement metamorphic rocks and the ore-hosting carbonate rocks.The ore geology and C-H-O-S-Pb isotopic data suggest that the YinchanggouQiluogou deposit is an unusual carbonate-hosted,strata-bound and epigenetic deposit that derived ore-forming materials from a mixed source of the underlying Porterozoic basements and the Sinian hosting carbonates.     

Salinity reflux and dolomitization of southern Australian slope sediments: the importance of low carbonate saturation levels

Anomalously saline waters in Ocean Drilling Program Holes 1127, 1129, 1130, 1131 and 1132, which penetrate southern Australian slope sediments, and isotopic analyses of large benthic foraminifera from southern Australian continental shelf sediments, indicate that Pleistocene–Holocene meso‐haline salinity reflux is occurring along the southern Australian margin. Ongoing dolomite formation is observed in slope sediments associated with marine waters commonly exceeding 50‰ salinity. A well‐flushed zone at the top of all holes contains pore waters with normal marine trace element contents, alkalinities and pH values. Dolomite precipitation occurs directly below the well‐flushed zone in two phases. Phase 1 is a nucleation stage associated with waters of relatively low pH (ca 7) caused by oxidation of H₂S diffusing upward from below. This dolomite precipitates in sediments < 80 m below the sea floor and has δ¹³C values consistent with having formed from normal sea water (? 1‰ to + 1‰ Vienna Pee Dee Belemnite). The Sr content of Phase 1 dolomite indicates that precipitation can occur prior to substantial metastable carbonate dissolution (< 300 ppm in Holes 1129 and 1127). Dolomite nucleation is interpreted to occur because the system is undersaturated with respect to the less stable minerals aragonite and Mg‐calcite, which form more readily in normal ocean water. Phase 2 is a growth stage associated with the dissolution of metastable carbonate in the acidified sea water. Analysis of large dolomite rhombs demonstrates that at depths > 80 m below the sea floor, Phase 2 dolomite grows on dolomite cores precipitated during Phase 1. Phase 2 dolomite has δ¹³C values similar to those of the surrounding bulk carbonate and high Sr values relative to Phase 1 dolomite, consistent with having formed in waters affected by aragonite and calcite dissolution. The nucleation stage in this model (Phase 1) challenges the more commonly accepted paradigm that inhibition of dolomitization by sea water is overcome by effectively increasing the saturation state of dolomite in sea water.     

Primary dolomite in the Late Triassic Travenanzes Formation,Dolomites, Northern Italy: Facies control and possible bacterial influence

In the late Carnian (Late Triassic), a carbonate‐clastic depositional system including a distal alluvial plain, flood basin and sabkha, tidal flat and shallow carbonate lagoon was established in the Dolomites (Northern Italy). The flood basin was a muddy supratidal environment where marine carbonates and continental siliciclastics interfingered. A dolomite phase made of sub‐micrometre euhedral crystals with a mosaic microstructure of nanometre‐scale domains was identified in stromatolitic laminae of the flood basin embedded in clay. This dolomite is interpreted here as primary and has a nearly stoichiometric composition, as opposed to younger early diagenetic (not primary) dolomite phases, which are commonly calcian. This primary dolomite was shielded from later diagenetic transformation by the clay. The stable isotopic composition of dolomite was analyzed along a depositional transect. The δ¹³C values range between ca ?6‰ and +4‰, with the most ¹³C‐depleted values in dolomites of the distal alluvial plain and flood basin, and the most ¹³C‐enriched in dolomites of the tidal flat and lagoon. Uniform δ¹⁸O values ranging between 0‰ and +3‰ were found in all sedimentary facies. It is hypothesized that the primary dolomite with mosaic microstructure nucleated on extracellular polymeric substances secreted by sulphate reducing bacteria. A multi‐step process involving sabkha and reflux dolomitization led to partial replacement and overgrowth of the primary dolomite, but replacement and overgrowth were facies‐dependent. Dolomites of the landward, clay‐rich portion of the sedimentary system were only moderately overgrown during late dolomitization steps, and partly retain an isotopic signature consistent with bacterial sulphate reduction with δ¹³C as low as ?6‰. In contrast, dolomites of the marine, clay‐free part of the system were probably transformed through sabkha and reflux diagenetic processes into calcian varieties, and exhibit δ¹³C values of ca +3‰. Major shifts of δ¹³C values strictly follow the lateral migration of facies and thus mark transgressions and regressions.     

S, C, O, H Isotope Data and Noble Gas Studies of the Maoniuping LREE Deposit, Sichuan Province, China： A Mantle Connection for Mineralization

The Maoniuping REE deposit, located about 22 km to the southwest of Mianning, Sichuan Province, is the second largest light REE deposit in China, subsequent to the Bayan Obo Fe-Nb-REE deposit in the Inner Mongolia Autonomous Region. Tectonically, it is located in the transitional zone between the Panxi rift and the Longmenshan-Jinpingshan orogenic zone. It is a carbonatite vein-type deposit hosted in alkaline complex rocks. The bastnaesite-barite, bastnaesite-calcite, and bastnaesite-microcline lodes are the main three types of REE ore lodes. Among these, the first lode is distributed most extensively and its REE mineralization is the strongest. Theδ34Sv-CDT values of the barites in the ore of the deposit vary in a narrow range of +5.0 to +5.1‰in the bastnaesite-calcite lode and +3.3 to +5.9‰in the bastnaesite-barite lode, showing the isotopic characteristics of magma-derived sulfur. Theδ13Cv-PDB values and theδ518OV-SMOW values in the bastnaesite-calcite lode range from -3.9 to -6.9‰and from +7.3 to +9.7‰, respectively, which fall into the range of "primary carbonatites", showing that carbon and oxygen in the ores of the Maoniuping deposit were derived mainly from a deep source. Theδ13Cv-PDB values of fluid inclusions vary from -3.0 to -5.6‰, with -3.0 to -4.0‰in the bastnaesite-calcite lode and -3.0 to -5.6‰in the bastnaesite-barite lode, which show characteristics of mantle-derived carbon. TheδDv-SMOW values of fluid inclusions range from -57 to -88‰, with -63 to -86‰in the bastnaesite-calcite lode and -57 to -88‰in the bastnaesite-barite lode, which show characteristics of mantle-derived hydrogen. Theδ18OH2OV-SMOW values vary from +7.4 to +8.6‰in the bastnaesite calcite lode, and +6.7 to +7.8‰in the bastnaesite-barite lode, almost overlapping the range of +5.5 to +9.5‰for magmatic water. The 4He content, R/Ra ratios are (13.95 to 119.58×10-6 (cm3/g)STP and 0.02 to 0.11, respectively, and 40Ar/36Ar is 313±1 to 437±2. Considering the 4He increase caused by high contents of radioactive elements, a mantle-derived fluid probably exists in the inclusions in the fluorite, calcite and bastnaesite samples. The Maoniuping deposit and its associated carbonatite-alkaline complex were formed in 40.3 to 12.2 Ma according to K-Ar and U-Pb data. All these data suggest that large quantities of mantle fluids were involved in the metallogenic process of the Maoniuping REE deposit through a fault system.     

Pleistocene geochemical stratigraphy of the borehole 1317E (IODP Expedition 307) in Porcupine Seabight,SW of Ireland: applications to palaeoceanography and palaeoclimate of the coral mound development

Stable isotopes and element compositions of the fine‐grained matrix were measured for IODP Expedition 307 Hole U1317E drilled from the summit of Challenger Mound in Porcupine Seabight, northeast Atlantic, to explore the palaeoceanographic and palaeoclimatic background to development of the deep‐water coral mound. The 155 m long mound section was divided into two units by an unconformity at 23.6 mbsf: Unit M1 (2.6–1.7 Ma) and Unit M2 (1.0–0.5 Ma). Results from 519 specimens show a difference in δ¹³C value between Unit M1 (?0.6‰ to ?5.0‰) and Unit M2 (?1.0‰ to 1.0‰), but such a distinct difference was not seen in δ¹⁸O values (1.0‰–2.5‰), CaCO₃ content (40–60 wt%), Sr/Ca ratio (2.0–8.0 mmol mol^?1), and Mg/Ca ratio (10.0–20.0 mmol mol^?1) through the mound. Positive δ¹⁸O and negative δ¹³C shifts at the mound base are consistent with the oceanographic changes in the northeast Atlantic at the beginning of the Quaternary. The positive δ¹³C regression in Unit M2 suggests a linkage to the mid Pleistocene intensified glaciation in the Northern Hemisphere. Warm Mediterranean Upper Core Water of Mediterranean Outflow Water, Eastern North Atlantic Water and cold Labrador Sea Water of North Atlantic Deep Water are key oceanographic features that cause spikes and shifts in stable isotope and element composition. However, the stable isotope values of the sediment matrix could not primarily record the glacial–interglacial eustatic/temperature change, but indirectly indicate current regimes of the intermediate oceanic layer where the coral mound grew. Similarly, elemental ratios and CaCO₃ content may not represent the productivity and temperature of surface sea water, respectively, but superpose the fractions from both surface and bottom water. It is concluded that palaeoceanographic change coupled to the Pleistocene glacial/interglacial cycles is a key control on the geochemical stratigraphy of the matrix sediments of the carbonate mound developed in Porcupine Seabight. Copyright © 2011 John Wiley & Sons, Ltd.     

Simultaneous In Situ Analysis of Carbon and Nitrogen Isotope Ratios in Organic Matter by Secondary Ion Mass Spectrometry

An in situ measurement method for simultaneous determination of carbon and nitrogen isotope ratios in organic matter was developed by secondary ion mass spectrometry with a spatial resolution of ~ 12 μm. Secondary ion intensities of ¹²C^?₂, ¹²C¹³C^?, ¹²C¹⁴N^? and ¹²C¹⁵N^? were simultaneously measured by three Faraday cups and one electron multiplier. Ions of ¹²C₂H^? were measured to monitor hydride interferences and to correct for mass bias. The analytical precisions of δ¹³C and δ¹⁵N values of a reference material (UWLA‐1 anthracite) were 0.16‰ and 0.56‰, respectively (2s). A negative correlation was observed between the mass bias of carbon and ¹²C₂H^?/¹²C^?₂ ratios of examined reference materials. In contrast, there was no correlation between mass bias and hydrogen concentration for nitrogen. The δ¹³C_VPDB and δ¹⁵N_Air values of twenty‐two individual globules of organic matter, found in carbonate rock of the 1878 Ma Gunflint Formation, were determined by the new procedure, ranging from ?33.8‰ to ?33.3‰ and +4.2‰ to 5.8‰, respectively. Means of δ¹³C_VPDB and δ¹⁵N_Air values, ?33.5 ± 0.25‰ and +5.2 ± 0.81‰, are consistent with reported values from bulk sample analysis within analytical precision.