Base-salt relief controls salt-related deformation in the Outer Kwanza Basin,offshore Angola

Salt-influenced passive margins are widespread and commonly hydrocarbon-rich. However, they can be structurally complex, with their kinematic development being poorly understood. Classic models of salt tectonics divide such margins into updip extensional, mid-slope translational and downdip contractional kinematic domains. Furthermore the faults, folds, and salt walls associated with each kinematic domain are typically assumed to form perpendicular to the maximum principal stress, which in gravitationally driven systems means broadly perpendicular to base-salt dip. We use high-resolution 3D seismic reflection data from the Outer Kwanza Basin, offshore Angola to show that these models cannot explain the diversity of salt structures developing on passive margins, especially those defined by considerable relief on the base-of-salt surface. Overburden seismic-stratigraphic patterns record the basinward translation and rotation, allowing us to reconstruct the origin and evolution of the salt structures. We show structures in the transitional domain of the Outer Kwanza Basin display three dominant trends, each characterised by different structural styles: (a) salt walls perpendicular to the overall base-salt dip, (b) salt walls parallel to the base-salt dip and (c) salt walls oblique to the base-salt dip. We show that each set of walls has a unique history, with synchronous phases of extension and compression occurring in adjacent structures despite their close spatial relationship. Our analysis suggests that, in the Outer Kwanza Basin, the structural evolution of the salt and overburden is predominantly controlled by translation over relief on the base-salt surface formed above fault scarps associated with a preceding phase of rifting. Changes in the downdip volumetric flux and velocity of the salt over topographic features can cause local extension or contraction of the salt and its overburden, associated with local acceleration or deceleration of the salt, respectively. This interaction with base-salt relief creates locally variable stress fields that deform the salt and its overburden, overprinting the broader, margin-scale salt tectonics typically associated with gravity gliding and spreading.     

Salt tectonic controls on deep‐water turbidite depositional systems: Miocene,southwestern Lower Congo Basin,offshore Angola

Regionally extensive 3D seismic data from the Lower Congo Basin, offshore Angola, have been used to investigate the influence of salt‐related structures on the location, geometry and evolution of Miocene deep‐water depositional systems. Isochron variations and cross‐sectional lap‐out relationships have then been used to qualitatively reconstruct the syn‐depositional morphology of salt‐cored structures. Coherence and Red‐green‐blue‐blended spectral decomposition volumes, tied to cross‐sectional seismic facies, allow imaging of the main sediment transport pathways and the distribution of their component seismic facies. Major sediment transport pathways developed in an area of complex salt‐related structures comprising normal faults, isolated diapirs and elongate salt walls with intervening intraslope basins. Key structural controls on the location of the main sediment transport pathways and the local interaction between lobe‐channel‐levee systems and individual structures were the length and height of structures, the location and geometry of segment boundaries, the growth and linkage of individual structures, and the incidence angle between structural strike and flow direction. Where the regional flow direction was at a high angle to structural strike, transport pathways passed progressively through multiple intraslope basins in a fill and spill manner. Segment boundaries and structural lows between diapirs acted as spill points, focusing sediment transport between intraslope basins. Channel–lobe transitions are commonly associated with these spill points, where flows expanded and entered depocentres. Deflection of channel‐levee complexes around individual structures was mainly controlled by the length of structures and incidence angle. Where regional flow direction was at a low angle to structural strike, sediment transport pathways ran parallel to structure and were confined to individual intraslope basins for many tens of kilometres. Spill between intraslope basins was rare. The relative position of structures and their segment boundaries was fixed during the Miocene, which effectively pinned the locations where sediment spilled from one intraslope basin to the next. As a result, major sediment transport pathways were used repeatedly, giving rise to vertically stacked lobe‐channel‐levee complexes along the pathways. Shadow zones devoid of coarse clastics developed in areas that were either structurally isolated from the sediment transport pathways or bypassed as a result of channel diversion.     

Late Ordovician,deep‐water gravity‐flow deposits,palaeogeography and tectonic setting,Tarim Basin,Northwest China

The Upper Ordovician in the Tarim Basin contains 5000–7000 m of siliciclastic and calciclastic deep‐water, gravity‐flow deposits. Their depositional architecture and palaeogeographical setting are documented in this investigation based on an integrated analysis of seismic, borehole and outcrop data. Six gravity‐flow depositional–palaeogeomorphological elements have been identified as follows: submarine canyon or deeply incised channels, broad and shallow erosional channels, erosional–depositional channel and levee–overbank complexes, frontal splays‐lobes and nonchannelized sheets, calciclastic lower slope fans and channel lobes or sheets, and debris‐flow complexes. Gravity‐flow deposits of the Sangtamu and Tierekeawati formations comprise a regional transgressive‐regressive megacycle, which can be further classified into six sequences bounded by unconformities and their correlative conformities. A series of incised valleys or canyons and erosional–depositional channels are identifiable along the major sequence boundaries which might have been formed as the result of global sea‐level falls. The depositional architecture of sequences varies from the upper slope to abyssal basin plain. Palaeogeographical patterns and distribution of the gravity‐flow deposits in the basin can be related to the change in tectonic setting from a passive continental margin in the Cambrian and Early to Middle Ordovician to a retroarc foreland setting in the Late Ordovician. More than 3000 m of siliciclastic submarine‐fan deposits accumulated in south‐eastern Tangguzibasi and north‐eastern Manjiaer depressions. Sedimentary units thin onto intrabasinal palaeotopographical highs of forebulge origin and thicken into backbulge depocentres. Sediments were sourced predominantly from arc terranes in the south‐east and the north‐east. Slide and mass‐transport complexes and a series of debris‐flow and turbidite deposits developed along the toes of unstable slopes on the margins of the deep‐water basins. Turbidite sandstones of channel‐fill and frontal‐splay origin and turbidite lobes comprise potential stratigraphic hydrocarbon reservoirs in the basin.     

Mass‐transport complexes as markers of deep‐water fold‐and‐thrust belt evolution: insights from the southern Magdalena fan,offshore Colombia

Mass wasting is an important process in the degradation of deep‐water fold‐and‐thrust belts. However, the relationship between mass‐transport complex (MTC) emplacement and the timing and spatial progression of contractional deformation of the seabed have not been extensively studied. This study uses high‐quality, 3D seismic reflection data from the southern Magdalena Fan, offshore Colombia to investigate how the growth of a deep‐water fold‐and‐thrust belt (the southern Sinú fold belt) is recorded in the source, distribution and size of MTCs. More than nine distinct, but coalesced MTCs overlie a major composite basal erosion surface. This surface formed by multiple syn‐ and post‐tectonic mass‐wasting events and is thus highly diachronous, thereby recording a protracted period of tectonism, seascape degradation and associated sedimentation. The size and source location of these MTCs changed through time: the oldest ‘detached’ MTCs are relatively small (over 9–100 km² in area) and sourced from the flanks of growing anticlines, whereas the younger ‘shelf‐attached’ MTCs are considerably larger (more than 200–300 km²), are sourced from the shelf, and post‐date the main phase of active folding and thrusting. Changes in the source, distribution and size of MTCs are tied to the sequential nucleation, amplification and along‐strike propagation of individual structures, showing that MTCs can be used to constrain the timing and style of contractional deformation, and seascape evolution in time and space.     

Event sedimentation in low‐latitude deep‐water carbonate basins,Anegada passage,northeast Caribbean

The Virgin Islands and Whiting basins in the Northeast Caribbean are deep, structurally controlled depocentres partially bound by shallow‐water carbonate platforms. Closed basins such as these are thought to document earthquake and hurricane events through the accumulation of event layers such as debris flow and turbidity current deposits and the internal deformation of deposited material. Event layers in the Virgin Islands and Whiting basins are predominantly thin and discontinuous, containing varying amounts of reef‐ and slope‐derived material. Three turbidites/sandy intervals in the upper 2 m of sediment in the eastern Virgin Islands Basin were deposited between ca. 2000 and 13 600 years ago, but do not extend across the basin. In the central and western Virgin Islands Basin, a structureless clay‐rich interval is interpreted to be a unifite. Within the Whiting Basin, several discontinuous turbidites and other sand‐rich intervals are primarily deposited in base of slope fans. The youngest of these turbidites is ca. 2600 years old. Sediment accumulation in these basins is low (<0.1 mm year^?1) for basin adjacent to carbonate platform, possibly due to limited sediment input during highstand sea‐level conditions, sediment trapping and/or cohesive basin walls. We find no evidence of recent sediment transport (turbidites or debris flows) or sediment deformation that can be attributed to the ca. M7.2 1867 Virgin Islands earthquake whose epicentre was located on the north wall of the Virgin Islands Basin or to recent hurricanes that have impacted the region. The lack of significant appreciable pebble or greater size carbonate material in any of the available cores suggests that submarine landslide and basin‐wide blocky debris flows have not been a significant mechanism of basin margin modification in the last several thousand years. Thus, basins such as those described here may be poor recorders of past natural hazards, but may provide a long‐term record of past oceanographic conditions in ocean passages.     

Crustal‐scale fluid flow during the tectonic evolution of the Bighorn Basin (Wyoming,USA)

Stable isotope measurements (O, C, Sr), microthermometry and salinity measurements of fluid inclusions from different fracture populations in several anticlines of the Sevier‐Laramide Bighorn basin (Wyoming, USA) were used to unravel the palaeohydrological evolution. New data on the microstructural setting were used to complement previous studies and refine the fracture sequence at basin scale. The latter provides the framework and timing of fluid migration events across the basin during the Sevier and Laramide orogenic phases. Since the Sevier tectonic loading of the foreland basin until its later involvement into the Laramide thick‐skinned orogeny, three main fracture sets (out of seven) were found to have efficiently enhanced the hydraulic permeability of the sedimentary cover rocks. These pulses of fluid are attested by calcite crystals precipitated in veins from hydrothermal (T > 120 °C) radiogenic fluids derived from Cretaceous meteoric fluids that interacted with the Precambrian basement rocks. Between these events, vein calcite precipitated from formational fluids at chemical and thermal equilibrium with surrounding environment. At basin scale, the earliest hydrothermal pulse is documented in the western part of the basin during forebulge flexuring and the second one is documented in basement‐cored folds during folding. In addition to this East/West diachronic opening of the cover rocks to hydrothermal pulses probably controlled by the tectonic style, a decrease in ^87/86Sr values from West to East suggests a crustal‐scale partially squeegee‐type eastward fluid migration in both basement and cover rocks since the early phase of the Sevier contraction. The interpretation of palaeofluid system at basin scale also implies that joints developed under an extensional stress regime are better vertical drains than joints developed under strike‐slip regime and enabled migration of basement‐derived hydrothermal fluids.     

Fault‐controlled fluid flow inferred from hydrothermal vents imaged in 3D seismic reflection data,offshore NW Australia

Fluid migration pathways in the subsurface are heavily influenced by pre‐existing faults. Although studies of active fluid‐escape structures can provide insights into the relationships between faults and fluid flow, they cannot fully constrain the geometry of and controls on the contemporaneous subsurface fluid flow pathways. We use 3D seismic reflection data from offshore NW Australia to map 121 ancient hydrothermal vents, likely related to magmatic activity, and a normal fault array considered to form fluid pathways. The buried vents consist of craters up to 264 m deep, which host a mound of disaggregated sedimentary material up to 518 m thick. There is a correlation between vent alignment and underlying fault traces. Seismic‐stratigraphic observations and fault kinematic analyses reveal that the vents were emplaced on an intra‐Tithonian seabed in response to the explosive release of fluids hosted within the fault array. We speculate that during the Late Jurassic the convex‐upwards morphology of the upper tip‐lines of individual faults acted to channelize ascending fluids and control where fluid expulsion and vent formation occurred. This contribution highlights the usefulness of 3D seismic reflection data to constraining normal fault‐controlled subsurface fluid flow.     

Geodynamic context for the deposition of coarse‐grained deep‐water axial channel systems in the Patagonian Andes

We present field and seismic evidence for the existence of Coniacian–Campanian syntectonic angular unconformities within basal foreland basin sequences of the Austral or Magallanes Basin, with implications for the understanding of deformation and sedimentation in the southern Patagonian Andes. The studied sequences belong to the mainly turbiditic Upper Cretaceous Cerro Toro Formation that includes a world‐class example of conglomerate‐filled deep‐water channel bodies deposited in an axial foredeep depocentre. We present multiple evidence of syntectonic deposition showing that the present internal domain of the fold‐thrust belt was an active Coniacian–Campanian wedge‐top depozone where deposition of turbidites and conglomerate channels of Cerro Toro took place. Cretaceous synsedimentary deformation was dominated by positive inversion of Jurassic extensional structures that produced elongated axial submarine trenches separated by structural highs controlling the development and distribution of axial channels. The position of Coniacian‐Campanian unconformities indicates a ca. 50–80 km advance of the orogenic front throughout the internal domain, implying that Late Cretaceous deformation was more significant in terms of widening the orogenic wedge than all subsequent Andean deformation stages. This south Patagonian orogenic event can be related to compressional stresses generated by the combination of both the collision of the western margin of Rocas Verdes Basin during its closure, and Atlantic ridge push forces due to its accelerated opening, during a global‐scale plate reorganization event.     

Anomalous passive subsidence of deep‐water sedimentary basins: a prearc basin example,southern New Caledonia Trough and Taranaki Basin,New Zealand

Stratigraphic data from petroleum wells and seismic reflection analysis reveal two distinct episodes of subsidence in the southern New Caledonia Trough and deep‐water Taranaki Basin. Tectonic subsidence of ~2.5 km was related to Cretaceous rift faulting and post‐rift thermal subsidence, and ~1.5 km of anomalous passive tectonic subsidence occurred during Cenozoic time. Pure‐shear stretching by factors of up to 2 is estimated for the first phase of subsidence from the exponential decay of post‐rift subsidence. The second subsidence event occured ~40 Ma after rifting ceased, and was not associated with faulting in the upper crust. Eocene subsidence patterns indicate northward tilting of the basin, followed by rapid regional subsidence during the Oligocene and Early Miocene. The resulting basin is 300–500 km wide and over 2000 km long, includes part of Taranaki Basin, and is not easily explained by any classic model of lithosphere deformation or cooling. The spatial scale of the basin, paucity of Cenozoic crustal faulting, and magnitudes of subsidence suggest a regional process that acted from below, probably originating within the upper mantle. This process was likely associated with inception of nearby Australia‐Pacific plate convergence, which ultimately formed the Tonga‐Kermadec subduction zone. Our study demonstrates that shallow‐water environments persisted for longer and their associated sedimentary sequences are hence thicker than would be predicted by any rift basin model that produces such large values of subsidence and an equivalent water depth. We suggest that convective processes within the upper mantle can influence the sedimentary facies distribution and thermal architecture of deep‐water basins, and that not all deep‐water basins are simply the evolved products of the same processes that produce shallow‐water sedimentary basins. This may be particularly true during the inception of subduction zones, and we suggest the term ‘prearc’ basin to describe this tectonic setting.     

Spatial and temporal variations in minibasin geometry and evolution in salt tectonic provinces: Lower Congo Basin,offshore Angola

In passive margin salt basins, the distinct kinematic domains of thin‐skinned extension, translation and contraction exert important controls on minibasin evolution. However, the relationship between various salt minibasin geometries and kinematic domain evolution is not clear. In this study, we use a semi‐regional 3D seismic reflection dataset from the Lower Congo Basin, offshore Angola, to investigate the evolution of a network of minibasins and intervening salt walls during thin‐skinned, gravity‐driven salt flow. Widespread thin‐skinned extension occurred during the Cenomanian to Coniacian, accommodated by numerous distributed normal faults that are typically 5–10 km long and spaced 1–4 km across strike within the supra‐salt cover. Subsequently, during the Santonian–Paleocene, multiple, 10–25 km long, 5–7 km wide depocentres progressively grew and linked along strike to form elongate minibasins separated by salt walls of comparable lengths. Simultaneous with the development of the minibasins, thin‐skinned contractional deformation occurred in the southwestern downslope part of the study area, forming folds and thrusts that are up to 20 km long and have a wavelength of 2–4 km. The elongate minibasins evolved into turtle structures during the Eocene to Oligocene. From the Miocene onwards, contraction of the supra‐salt cover caused squeezing and uplift of the salt walls, further confining the minibasin depocentres. We find kinematic domains of extension, translation and contraction control the minibasin initiation and subsequent evolution. However, we also observe variations in minibasin geometries associated with along‐strike growth and linkage of depocentres. Neighbouring minibasins may have different subsidence rates and maturity leading to marked variations in their geometry. Additionally, migration of the contractional domain upslope and multiple phases of thin‐skinned salt tectonics further complicates the spatial variations in minibasin geometry and evolution. This study suggests that minibasin growth is more variable and complex than existing domain‐controlled models would suggest.     

Tectonic and oceanographic process interactions archived in Late Cretaceous to Present deep‐marine stratigraphy on the Exmouth Plateau,offshore NW Australia

Deep‐marine deposits provide a valuable archive of process interactions between sediment gravity flows, pelagic sedimentation and thermohaline bottom‐currents. Stratigraphic successions can also record plate‐scale tectonic processes (e.g. continental breakup and shortening) that impact long‐term ocean circulation patterns, including changes in climate and biodiversity. One such setting is the Exmouth Plateau, offshore NW Australia, which has been a relatively stable, fine‐grained carbonate‐dominated continental margin from the Late Cretaceous to Present. We combine extensive 2D (~40,000 km) and 3D (3,627 km²) seismic reflection data with lithologic and biostratigraphic information from wells to reconstruct the tectonic and oceanographic evolution of this margin. We identified three large‐scale seismic units (SUs): (a) SU‐1 (Late Cretaceous)—500 m‐thick, and characterised by NE‐SW‐trending, slope‐normal elongate depocentres (c. 200 km long and 70 km wide), with erosional surfaces at their bases and tops, which are interpreted as the result of contour‐parallel bottom‐currents, coeval with the onset of opening of the Southern Ocean; (b) SU‐2 (Palaeocene—Late Miocene)—800 m‐thick and characterised by: (a) very large (amplitude, c. 40 m and wavelength, c. 3 km), SW‐migrating, NW‐SE‐trending sediment waves, (b) large (4 km‐wide, 100 m‐deep), NE‐trending scours that flank the sediment waves and (c) NW‐trending, 4 km‐wide and 80 m‐deep turbidite channel, infilled by NE‐dipping reflectors, which together may reflect an intensification of NE‐flowing bottom currents during a relative sea‐level fall following the establishment of circumpolar‐ocean current around Antarctica; and (c) SU‐3 (Late Miocene—Present)—1,000 m‐thick and is dominated by large (up to 100 km³) mass‐transport complexes (MTCs) derived from the continental margin (to the east) and the Exmouth Plateau Arch (to the west), and accumulated mainly in the adjacent Kangaroo Syncline. This change in depositional style may be linked to tectonically‐induced seabed tilting and folding caused by collision and subduction along the northern margin of the Australian plate. Hence, the stratigraphic record of the Exmouth Plateau provides a rich archive of plate‐scale regional geological events occurring along the distant southern (2,000 km away) and northern (1,500 km away) margins of the Australian plate.     

The tectono‐sedimentary evolution of a supra‐detachment rift basin at a deep‐water magma‐poor rifted margin: the example of the Samedan Basin preserved in the Err nappe in SE Switzerland

We describe the tectono‐sedimentary evolution of a Middle Jurassic, rift‐related supra‐detachment basin of the ancient Alpine Tethys margin exposed in the Central Alps (SE Switzerland). Based on pre‐Alpine restoration, we demonstrate that the rift basin developed over a detachment system that is traced over more than 40 km from thinned continental crust to exhumed mantle. The detachment faults are overlain by extensional allochthons consisting of upper crustal rocks and pre‐rift sediments up to several kilometres long and several hundreds of metres thick, compartmentalizing the distal margin into sub‐basins. We mapped and restored one of these sub‐basins, the Samedan Basin. It consists of a V‐shape geometry in map view, which is confined by extensional allochthons and floored by a detachment fault. It can be restored over a minimum distance of 11 km along and about 4 km perpendicular to the basin axis. Its sedimentary infill can be subdivided into basal (initial), intermediate (widening) and top (post‐tectonic) facies tracts. These tracts document (1) formation of the basin initially bounded by high‐angle faults and developing into low‐angle detachment faults, (2) widening of the basin and (3) migration of deformation further outboard. The basal facies tract is made of locally derived, poorly sorted gravity flow deposits that show a progressive change from hangingwall to footwall‐derived lithologies. Upsection the sediments develop into turbidity current deposits that show retrogradation (intermediate facies tract) and starvation of the sedimentary system (post‐tectonic facies tract). On the scale of the distal margin, the syn‐tectonic record documents a thinning‐ and fining‐upward sequence related to the back stepping of the tectonically derived sediment source, progressive starvation of the sedimentary system and migration of deformation resulting in exhumation and progressive delamination of the thinned crust during final rifting. This study provides valuable insights into the tectono‐sedimentary evolution and stratigraphic architecture of a supra‐detachment basin formed over hyper‐extended crust.     

Evidence for focused hot fluid flow within the Britannia Field, offshore Scotland, UK

Fluid inclusion and scanning electron microscope‐cathodoluminescence evidence indicates focused hot, saline, diagenetic fluid flow within the Eastern Flank of the Britannia Field, offshore Scotland, UK. The fluid was sourced from the Andrew Salt Dome, 10 km to the east. The fluids, which promoted quartz cementation of the upper zones within the field, were up to ～30°C hotter and had salinities up to ～10 wt% NaCl equivalent higher than fluids from lower in the reservoir section. During diagenesis hot saline fluids migrated westwards as part of a radiating ‘diagenetic front’ from the Andrew Salt Dome. Structural dip associated with the Eastern Flank of the Fladen Ground Spur impeded the westward movement of the diagenetic fluid. The quartz cements from the upper and lower reservoir zones can be distinguished by morphology. In the upper zones the quartz cements have well‐developed macro‐crystalline zoning and heterogeneous luminescence across the grain. In the lower zones, the cements are much less developed, unzoned and very weakly luminescent. The diagenetic fluids were primarily focused into Zone 45 within the upper reservoir. Furthermore, within the Main Platform Area the most prolific producing zone is Zone 45, indicating the importance of this interval as a permeable flow unit during both diagenetic and production timescales. Within the Eastern Flank, the quartz overgrowths have a major impact on reservoir permeability and thus well productivity. The overgrowths are most extensive in the originally clean sandstones with low clay content. Clay in optimum volumes (5–10%) can inhibit nucleation of the damaging quartz overgrowths without having a detrimental effect on pore connectivity. These observations provide a predictive concept for use in the search for relative reservoir sweetspots within the degraded Eastern Flank.     

The interplay between deformation,erosion and sedimentation in the deep‐water Mexican Ridges foldbelt,western Gulf of Mexico basin

We analyse a regional 2D seismic section of the Mexican Ridges foldbelt (MRFB), western Gulf of Mexico, and construct excess‐area diagrams for each of the structures comprising the foldbelt to estimate shortening, the onset of folding and the degradation of the folded seafloor. From the chronostratigraphy, we derive rates of tectonic and superficial mass transport and illustrate how they change across the MRFB. The resulting tectonic transport in the MRFB is 11.8 km forming a train of twelve buckle folds above a detachment at a depth of ca. 6 s of two‐way travel time, with an average strain of ca. 10%. The fold train grew at a mean uplift rate of ca. 0.21 mm year^?1. Cross‐sectional balancing demonstrates that shortening balances the down‐slip motion of the Quetzalcoatl extensional system (QES), suggesting that horizontal compaction, volume loss and other penetrative deformation mechanisms are negligible. By assuming steady‐state denudation, we are able to distinguish sediments derived locally from sediments transported from distant sources. The constant of mass diffusivity, a parameter controlling the degradation rate, is ca. 0.42 m² year ^?1, which is characteristic of rapid, episodic, superficial mass movements. The combined sedimentation rate from both, local and distal sources is ca. 0.23 mm year ^?1. Those values are not constant; structures proximal to the continental shelf are rising rapidly and are being degraded more intensely than those in the distal part of the MRFB, where sedimentation outweighs tectonic uplift. Our results indicate deformation initiated up to 3 Myr earlier than estimated from stacking patterns. Moreover, we find deformation started synchronously during the Late Miocene throughout the MRFB and not in two episodes as the stacking relations suggest. The discrepancy can be explained by a delay in the sedimentary response to folding. During early fold growth, nearly constant thickness strata are deposited before a progressive unconformity and other converging geometries develop. The development of growth strata is fast in the folds near the QES, which are being uplifted rapidly and degraded vigorously. Under these conditions, the stratigraphic relations give only a broad estimate of the pretectonic/syntectonic limit when compared to the excess‐area method. On the other hand, the development of growth strata took twice as much time for folds near the abyssal plain, which are being uplifted at a slower rate and where degradation is less intense. Consequently, the delay takes more time, and the use of stratigraphic relations introduces an even more pronounced bias towards younger ages in the identification of the onset of folding.     

Palaeogeography and diachronous infill of an ancient deep‐marine foreland basin,Upper Cretaceous Cerro Toro Formation,Magallanes Basin

The details of how narrow, orogen‐parallel ocean basins are filled with sediment by large axial submarine channels is important to understand because these depositional systems commonly form in through‐like basins in various tectonic settings. The Magallanes foreland basin is an excellent location to study an orogen‐parallel deep‐marine system. Conglomerate lenses of the Upper Cretaceous Cerro Toro Formation have been previously interpreted to represent the fill of a single submarine channel (4–8 km wide, >100 km long) that funneled coarse detritus southward along the basin axis. This interpretation was based on lithologic correlations. New U/Pb dating of zircons from volcanic ashes and sandstones, coupled with strontium isotope stratigraphy, refine the controls on depositional ages and provenance. Results demonstrate that north‐south oriented conglomerate lenses are contemporaneous within error limits (ca. 84–82 Ma) supporting that they represent parts of an axial channel belt. Channel deposits 20 km west of the axial location are 87–82 Ma in age. These channels are partly contemporaneous with the ones within the axial channel belt, making it likely that they represent feeders to the axial channel system. The northern Cerro Toro Formation spans a Turonian to Campanian interval (ca. 90–82 Ma) whereas the formation top, 70 km to the south, is as young as ca. 76 Ma. Kolmogorov–Smirnoff statistical analysis on detrital zircon age distributions shows that the northern uppermost Cerro Toro Formation yields a statistically different age distribution than other samples from the same formation but shows no difference relative to the overlying Tres Pasos Formation. These results suggest the partly coeval deposition of both formations. Integration of previously acquired geochronologic and stratigraphic data with new data show a pronounced southward younging pattern in all four marine formations in the Magallanes Basin. Highly diachronous infilling may be an important depositional pattern for narrow, orogen‐parallel ocean basins.     

Across‐axis variations in petrophysical properties of the North Porcupine Basin,offshore Ireland: New insights from long‐streamer traveltime tomography

The Porcupine Basin is a Mesozoic failed rift located in the North Atlantic margin, SW of Ireland, in which a postrift phase of extensional faulting and reactivation of synrift faults occurred during the Mid–Late Eocene. Fault zones are known to act as either conduits or barriers for fluid flow and to contribute to overpressure. Yet, little is known about the distribution of fluids and their relation to the tectono‐stratigraphic architecture of the Porcupine Basin. One way to tackle this aspect is by assessing seismic (V_p) and petrophysical (e.g., porosity) properties of the basin stratigraphy. Here, we use for the first time in the Porcupine Basin 10‐km‐long‐streamer data to perform traveltime tomography of first arrivals and retrieve the 2D V_p structure of the postrift sequence along a ~130‐km‐long EW profile across the northern Porcupine Basin. A new V_p–density relationship is derived from the exploration wells tied to the seismic line to estimate density and bulk porosity of the Cenozoic postrift sequence from the tomographic result. The V_p model covers the shallowest 4 km of the basin and reveals a steeper vertical velocity gradient in the centre of the basin than in the flanks. This variation together with a relatively thick Neogene and Quaternary sediment accumulation in the centre of the basin suggests higher overburden pressure and compaction compared to the margins, implying fluid flow towards the edges of the basin driven by differential compaction. The V_p model also reveals two prominent subvertical low‐velocity bodies on the western margin of the basin. The tomographic model in combination with the time‐migrated seismic section shows that whereas the first anomaly spatially coincides with the western basin‐bounding fault, the second body occurs within the hangingwall of the fault, where no major faulting is observed. Porosity estimates suggest that this latter anomaly indicates pore overpressure of sandier Early–Mid Eocene units. Lithological well control together with fault displacement analysis suggests that the western basin‐bounding fault can act as a hydraulic barrier for fluids migrating from the centre of the basin towards its flanks, favouring fluid compartmentalization and overpressure of sandier units of its hangingwall.     

Tectonic control on the distribution of Palaeocene marine syn‐rift deposits in the Fenris Graben,northwestern Vøring Basin,offshore Norway

The location, shape and stacking pattern of deep‐marine clastic sediments on drifting stage passive continental margins are strongly influenced by the slope and basin floor topography. The tectonic control on sediment routes and dispersal patterns, however, is less understood on rift margins, particularly the impact of subaqueous transfer zones or relay ramps. In this study, an area of the Palaeocene marine syn‐rift succession in the Vøring Basin is mapped in detail to unravel the relationship between fault geometries and sedimentary infill patterns. Using root‐mean‐square (RMS) amplitudes and deposit thicknesses interpreted from seismic data, sedimentary elements in the Fenris Graben and the Gjallar Ridge are related to the fault patterns and the overall basin geometry. Older deposits are found to be aligned parallel to the basin axis, with the greatest sediment thicknesses on the hanging walls and adjacent to rotated faults. The main sediment supply is interpreted to be sourced from the Vøring Marginal High and Greenland, presumably containing a significant proportion of coarser grained material and comprising numerous local depocentres. With continued rifting and decreased fault activity, finer grained deposition draped the previous basin infill and smoothed the basin floor topography. Deposits close to the foot of relay ramps along the Gjallar Ridge, however, suggest that the high may have acted as a local sediment source leading to local depocentres. Transfer zones played a significant role in sediment transport during the early rifting phase, and were able to maintain some influence into the late rifting and early drifting stage. Identification of early‐ and late‐stage transfer zones may therefore help in locating coarser grained depocentres and potential hydrocarbon reservoirs.     

The synthetic seismic expression of the Messinian salinity crisis from onshore records: Implications for shallow‐ to deep‐water correlations

The onshore–offshore correlation of sedimentary successions is a common problem in basin analysis, but it becomes critical for the full understanding of the Messinian salinity crisis (MSC), a complex array of palaeoenvironmental events which affected the Mediterranean basin at the end of the Miocene. The outcrop records show that the Messinian stratigraphic architectures may be highly complex as the deposits of the different MSC evolutionary stages can be lithologically similar and separated by erosional surfaces and/or morphostructural highs. The correct definition of the nature and stratigraphic position of Messinian deposits in offshore areas through seismic data may be almost impossible, especially where core data are sparse. To bridge the gap between onshore and offshore records, we have built synthetic seismic sections from well‐constrained outcrop successions. Our results provide useful insights and warnings for the interpretation of offshore data, pointing out that MSC units having different age, nature and depositional settings, may show similar seismic facies and geometries. Conversely, the same deposit may result in different seismic facies, either with parallel and high‐amplitude reflections or even transparent or chaotic due to interference patterns of seismic reflections related to dominant frequency. It follows that a correct interpretation of the nature and age of deep‐seated Messinian deposits can only be obtained through the integration of seismic and core data, and considering the onshore record. The application of our approach to the Balearic Promontory results in an alternative interpretation with respect to previous models. We show that this offshore area has good analogues in the onshore of the Betic Cordillera and includes both shallow and intermediate depth sub‐basins that underwent a strong post‐Messinian subsidence.     

Fracturing and fluid‐flow during post‐rift subsidence in carbonates of the Jandaíra Formation,Potiguar Basin,NE Brazil

Pervasive fracture networks are common in many reservoir‐scale carbonate bodies even in the absence of large deformation and exert a major impact on their mechanical and flow behaviour. The Upper Cretaceous Jandaíra Formation is a few hundred meters thick succession of shallow water carbonates deposited during the early post‐rift stage of the Potiguar rift (NE Brazil). The Jandaíra Formation in the present onshore domain experienced <1.5 km thermal subsidence and, following Tertiary exhumation, forms outcrops over an area of >1000 km². The carbonates have a gentle, <5?, dip to the NE and are affected by few regional, low displacement faults or folds. Despite their simple tectonic history, carbonates display ubiquitous open fractures, sub‐vertical veins, and sub‐vertical as well as sub‐horizontal stylolites. Combining structural analysis, drone imaging, isotope studies and mathematical modelling, we reconstruct the fracturing history of the Jandaíra Formation during and following subsidence and analyse the impact fractures had on coeval fluid flow. We find that Jandaíra carbonates, fully cemented after early diagenesis, experienced negligible deformation during the first few hundreds of meters of subsidence but were pervasively fractured when they reached depths >400–500 m. Deformation was accommodated by a dense network of sub‐vertical mode I and hybrid fractures associated with sub‐vertical stylolites developed in a stress field characterised by a sub‐horizontal σ₁ and sub‐vertical σ₂. The development of a network of hybrid fractures, rarely reported in the literature, activated the circulation of waters charged in the mountainous region, flowing along the porous Açu sandstone underlying the Jandaíra carbonates and rising to the surface through the fractured carbonates. With persisting subsidence, carbonates reached depths of 800–900 m entering a depth interval characterised by a sub‐vertical σ₁. At this stage, sub‐horizontal stylolites developed liberating calcite which sealed the sub‐vertical open fractures transforming them in veins and preventing further flow. During Tertiary exhumation, several of the pre‐existing veins and stylolites opened and became longer, and new fractures were created typically with the same directions of the older features. The simplicity of our model suggests that most rocks in passive margin settings might have followed a similar evolution and thus display similar structures.