The geology of kimberlite pipes of the Ekati property, Northwest Territories, Canada

This paper reviews key characteristics of kimberlites on the Ekati property, NWT, Canada. To date 150 kimberlites have been discovered on the property, five of which are mined for diamonds. The kimberlites intrude Archean basement of the central Slave craton. Numerous Proterozoic diabase dykes intrude the area. The Precambrian rocks are overlain by Quaternary glacial sediments. No Phanerozoic rocks are present. However, mudstone xenoliths and disaggregated sediment within the kimberlites indicate that late-Cretaceous and Tertiary cover (likely <200 m) was present at the time of emplacement. The Ekati kimberlites range in age from 45 to 75 Ma. They are mostly small pipe-like bodies (surface area mostly <3 ha but up to 20 ha) that typically extend to projected depths of 400–600 m below current surface. Pipe morphologies are strongly controlled by joints and faults. The kimberlites consist primarily of variably bedded volcaniclastic kimberlite (VK). This is dominated by juvenile constituents (olivine and lesser kimberlitic ash) and variable amounts of exotic sediment (primarily mud), with minor amounts of xenolithic wall-rock material (generally <5%). Kimberlite types include: mud-rich resedimented VK (mRVK); olivine-rich VK (oVK); sedimentary kimberlite; primary VK (PVK); tuffisitic kimberlite (TK) and magmatic kimberlite (MK). The presence and arrangement of these rock types varies widely. The majority of bodies are dominated by oVK and mRVK, but PVK is prominent in the lower portions of certain kimberlites. TK is rare. MK occurs primarily as precursor dykes but, in a few cases, forms pipe-filling intrusions. The internal geology of the kimberlites ranges from simple single-phase pipes (RVK or MK), to complex bodies with multiple, distinct units of VK. The latter include pipes infilled with steep, irregular VK blocks/wedges and at least one case in which the pipe is occupied by well-defined sub-horizontal VK phases, including a unique, 100-m-thick graded sequence. The whole-rock compositions of VK samples suggest significant loss of kimberlitic fines during eruption followed by variable dilution by surface sediment and concurrent incorporation of kimberlitic ash. Diamond distribution within the kimberlites reflects the amount and nature of mantle material sampled by individual kimberlite phases, but is modified considerably by eruption and depositional processes. The characteristics of the Ekati kimberlites are consistent with a two-stage emplacement process: (1) explosive eruption/s causing vent clearing followed by formation of a significant tephra rim/cone of highly fragmented, olivine-enriched juvenile material with varying amounts of kimberlitic ash and surface sediments (predominantly mud); and (2) infilling of the vent by direct deposition from the eruption column and/or resedimentation of crater rim materials. The presence of less fragmented, juvenile-rich PVK in the lower portions of certain pipes and the intrusion of large volumes of MK to shallow levels in some bodies suggest emplacement of relatively volatile-depleted, less explosive kimberlite in the later stages of pipe formation and/or filling. Explosive devolatilisation of CO₂-rich kimberlite magma is interpreted to have been the dominant eruption mechanism, but phreatomagmatism is thought to have played a role and, in certain cases, may have been dominant.     

Formation of albitite-hosted uranium within IOCG systems: the Southern Breccia,Great Bear magmatic zone,Northwest Territories,Canada

Uranium and polymetallic U mineralization hosted within brecciated albitites occurs one kilometer south of the magnetite-rich Au–Co–Bi–Cu NICO deposit in the southern Great Bear magmatic zone (GBMZ), Canada. Concentrations up to 1 wt% U are distributed throughout a 3 by 0.5 km albitization corridor defined as the Southern Breccia zone. Two distinct U mineralization events are observed. Primary uraninite precipitated with or without pyrite–chalcopyrite?±?molybdenite within magnetite–ilmenite–biotite–K-feldspar-altered breccias during high-temperature potassic–iron alteration. Subsequently, pitchblende precipitated in earthy hematite–specular hematite–chlorite veins associated with a low-temperature iron–magnesium alteration. The uraninite-bearing mineralization postdates sodic (albite) and more localized high-temperature potassic–iron (biotite–magnetite ± K-feldspar) alteration yet predates potassic (K-feldspar), boron (tourmaline) and potassic–iron–magnesium (hematite ± K-feldspar ± chlorite) alteration. The Southern Breccia zone shares attributes of the Valhalla (Australia) and Lagoa Real (Brazil) albitite-hosted U deposits but contains greater iron oxide contents and lower contents of riebeckite and carbonates. Potassium, Ni, and Th are also enriched whereas Zr and Sr are depleted with respect to the aforementioned albitite-hosted U deposits. Field relationships, geochemical signatures and available U–Pb dates on pre-, syn- and post-mineralization intrusions place the development of the Southern Breccia and the NICO deposit as part of a single iron oxide alkali-altered (IOAA) system. In addition, this case example illustrates that albitite-hosted U deposits can form in albitization zones that predate base and precious metal ore zones in a single IOAA system and become traps for U and multiple metals once the tectonic regime favors fluid mixing and oxidation-reduction reactions.     

Geochemical exploration for unconformity-type uranium deposits in permafrost terrain, Hornby bay basin, Northwest territories, Canada

The Hornby Bay sandstone basin of the Northwest Territories represents one of three areas in Canada in which the geological environment is favourable for the occurrence of unconformity-type uranium deposits. The project area lies within the zone of continuous permafrost and is associated with relatively thin and locally derived tills and abundant outcrops. Topographic relief is normally in the order of 100 m but may locally exceed 300 m/km in more rugged areas.Geochemical case histories for soil and lake-sediment surveys illustrate: identification of regional anomaly, anomaly follow-up, and detailed investigations. Success in locating uranium occurrences using geochemical surveys is high. Orientation studies trace anomalous dispersion trains 10 to 200 m downslope of recognized sources. Anomaly generation is favoured by active hydromorphic processes in geochemically homogeneous overburden containing an average background of 0.5 ppm uranium (using a 4N nitric acid leach). Anomaly contrasts are typically 2 Xto 3 X this value, and anomalous values exceeding 1.5 ppm uranium are highly reproducible.Copper and radium anomalies act as pathfinders for uranium. Lead is present in anomalous concentrations in specimens from the uranium occurrences but lead enrichment in overburden is not sufficiently great to permit its use as a pathfinder element. Preliminary work based on radon and ²¹⁰Po has not led to identification of anomalies other than those recognized by more routine geochemical surveys.Association of geochemical anomalies with faults within the sandstone basin constitutes one of four conditions elevating an area to drill target status. Methods for drill testing of geochemical soil anomalies depend on the relationship between the geochemical anomaly and an identifiable fault zone.     

Hydrocarbon gases associated with permafrost in the Mackenzie Delta,Northwest Territories,Canada

Molecular and isotopic analyses of core gas samples from 3 permafrost research core holes (92GSCTAGLU, 92GSCKUMAK, 92GSCUNIPKAT; sample core depths ranging from 0.36 to 413.82 m) in the Mackenzie Delta of the Northwest Territories of Canada reveal the presence of hydrocarbon gases from both microbial and thermogenic sources. Analyses of most headspace and blended gas samples from the ice-bonded permafrost portion of the core holes yielded C₁/(C₂+C₃) hydrocarbon gas ratios and CH₄–C isotopic compositions (δ¹³C CH₄) indicative of microbially sourced CH₄ gas. However, near the base of ice-bonded permafrost and into the underlying non-frozen stratigraphic section, an increase in ethane (C₂) concentrations, decreases in C₁/(C₂+C₃) hydrocarbon gas ratios, and CH₄–C isotopic (δ¹³C CH₄) data indicate the presence of hydrocarbon gases derived from a thermogenic source. The thermogenic gas below permafrost in the Mackenzie Delta likely migrated from deeper hydrocarbon accumulations and/or directly from thermally mature hydrocarbon source rocks.     

Iron-formation and glaciogenic rocks of the Rapitan Group,Northwest Territories,Canada

In northwestern Canada, iron-formation occurs as part of the Rapitan Group, a dominantly sedimentary succession of probable Late Precambrian age. The Rapitan Group contains abundant evidence of glaciogenic deposition. It includes massive mixtites which contain numerous faceted and striated clasts. Finely bedded and laminated sedimentary rocks of the Lower Rapitan contain many large isolated (ice-rafted?) intra- and extra-basinal clasts. The Lower and Middle Rapitan are interpreted as products of a glacial marine regime. The iron-formation is interbedded with thin mixtite beds and contains large exotic clasts which are probably indicative of the existence of floating ice at the time of deposition of at least part of the iron-formation. If the apparently low paleolatitudes are confirmed, then glacial marine interpretation of the Rapitan, and the probably correlative Toby Conglomerate of southern British Columbia, support the postulate of a very extensive Late Precambrian ice sheet in North America.Similar iron-formations of similar age are present in South America (Jacadigo Series), in South-West Africa (Damara Supergroup) and in South Australia (Yudnamutana Sub-Group). All of these iron-formations are associated with glaciogenic rocks. In addition to the iron-formations, dolostones, limestones and evaporites (?) are intimately associated with Late Precambrian mixtites, considered by many to be glaciogenic.Huronian (Early Proterozoic) and correlative sequences of North America, and rocks of similar age in South Africa also contain closely juxtaposed undoubted glaciogenic rocks, iron-formations, dolostones and aluminous quartzites. The dolostones and aluminous sedimentary rocks have been interpreted as having formed under warm climatic conditions, but might also be explained by invoking higher P_CO2 levels in the Early Proterozoic atmosphere. By analogy with the Huronian succession, preservation of “warm climate” indicators in mixtite-bearing Late Precambrian sequences does not preclude a glacial origin for the mixtites.     

Chemical mineralogy of some cordierite-bearing rocks near Yellowknife,Northwest Territories,Canada

Meta-graywacke and meta-argillite of Archean age near Yellowknife contain biotite, cordierite, gedrite and sillimanite isograds towards the Sparrow Lake granite pluton. The chemistry of biotite, cordierite, gedrite and garnet in rocks that up-grade from the cordierite isograd indicate a small range of chemical composition, particularly with reference to Mg, Fe and Mn. The analyses show further that among the coexisting ferromagnesian minerals Fe/Fe+ Mg ratio decreases in the sequence: garnet, gedrite, biotite, cordierite while Mn/Fe+Mg+Mn ratio decreases in the sequence garnet, gedrite, cordierite, biotite. The same order is also observed in the distribution diagrams. The regular distribution of Mg, Fe and Mn among the coexisting phases demonstrate that chemical equilibrium was attained and preserved in these Archean rocks. Mg-Fe distribution between cordierite and biotite appears to be dependent on the temperature of crystallization or metamorphic grade.     

Multiple glaciations and marine transgressions, western Kennedy Channel, Northwest Territories, Canada

Along a 70 km section of western Kennedy Channel three prominent weathering zones are identified and serve to differentiate major events in the Quaternary landscape. The oldest zone (Zone 111b) is characterized by a deeply weathered, erratic-free terrain which extends from the mountain summits down to ca. 470 m above sea level. This zone shows no evidence of former glacierization. Zone 111a extends from ca. 470 to 370m above sea level and is characterized by sparse granite, gneiss and quartzite erratics amongst weathered bedrock and extensive, oxidized colluvium. The Precambrian provenance and uppermost profile of these erratics reflect the maximum advance of the northwest Greenland Ice Sheet onto northeastern Ellesmere Island. These uppermost erratics along western Kennedy Channel decrease in elevation southward and suggest that the former Greenland ice was thickest in the direction of the major outlet of Petermann Fiord. No evidence of a former ice ridge in Nares Strait was observed. Zone II is marked by the moraines of the outermost Ellesmere Island ice advance which form a prominent morpho-stratigraphic boundary where they cross-cut the zone of Greenland erratics at ca. 250–350 m above sea level. These moraines show advanced surface weathering and ice recession from them is associated with a pre-Holocene shoreline at 162 m above sea level. Late Wisconsin/Würm glacial deposits, equivalent to Zone I, were not observed in the lower valleys bordering Kennedy Channel. The outermost Ellesmere Island ice advance (Zone II) is radiometrically bracketed by ¹⁴C dates on in situ shells from subtill and supratill marine units which are 40,350±750 and>39,000 B.P., respectively. Amino acid age estimates on the same shell samples and others from similar stratigraphic positions all suggest ages of >35,000 B.P. Stratigraphically and chronologically this ice advance is correlated with the outermost Ellesmere Island ice advance 20–40 km to the north which formed small ice shelves when the relative sea level was ca. 175 m above sea level. The Holocene marine transgression along western Kennedy Channel occurred in an ice-free corridor maintained between the separated margins of the northwest Greenland and northeast Ellesmere Island ice sheets during the last glaciation. Initial emergence may have begun ca. 12,300 B.P., however, sea level had dropped only 15 m by ca. 8000 B.P. after which glacio-isostatic unloading of the corridor was rapid. The implications of these data are discussed in the context of existing models on high latitude glaciation and paleoclimatic change     

Glacial geology as a key to geochemical exploration in areas of glacial overburden with particular reference to Canada

The applicability of geochemical exploration procedures in previously glaciated areas is largely a function of the nature of the glacial sediments. A considerable diversity of glacial sediments and landforms results from a phase of glaciation, these products bearing variable compositional relationships to the local bedrock, and thus have varying usefulness in geochemical exploration. A classification of glacial sediments and landforms is described, with emphasis being placed on the provenance of the material composing the different types. The nature and extent of the Wisconsin glaciation in Canada is summarized, together with a review of the distribution of glacial sediments and landforms. Variations in the nature of the glaciation and the distribution of different glacial sediments and landforms have contributed to the situation that the applicability of geochemical exploration techniques varies across Canada. The nature of metal dispersion in glacial sediments resulting directly from glacial activity is discussed, particular reference being given to those features that have proved effective in geochemical exploration. The role of dispersion patterns in glacial sediments and landforms is discussed with regard to varying scales of geochemical exploration programs. Variations in the distribution of glacial sediments and the nature of associated dispersion patterns, both on the regional and local scales, make a consideration of the glacial geology an essential feature for the implementation of appropriate geochemical exploration procedures.     

Geology and resource development of the Kelvin kimberlite pipe,Northwest Territories,Canada

The early Cambrian to late Neoproterozoic Kelvin kimberlite pipe is located in the southeast of the Archean Slave Craton in northern Canada, eight km northeast of the Gahcho Kué diamond mine. Kelvin was first discovered in 2000 by De Beers Canada. Subsequent exploration undertaken by Kennady Diamonds Inc. between 2012 and 2016 resulted in the discovery of significant thicknesses of volcaniclastic kimberlite that had not previously been observed. Through extensive delineation drilling Kelvin has been shown to present an atypical, steep-sided inclined L-shaped pipe-like morphology with an overall dip of 15 to 20°. With a surface expression of only 0.08 ha Kelvin dips towards the northwest before turning north. The body (which remains open at depth) has been constrained to a current overall strike length of 700 m with varying vertical thickness (70 to 200 m) and width (30 to 70 m). Detailed core logging, petrography and microdiamond analysis have shown that the pipe infill comprises several phases of sub-horizontally oriented kimberlite (KIMB1, KIMB2, KIMB3, KIMB4, KIMB7 and KIMB8) resulting from multiple emplacement events. The pipe infill is dominated by Kimberley-type pyroclastic kimberlite or “KPK”, historically referred to as tuffisitic kimberlite breccia or “TKB”, with less common hypabyssal kimberlite (HK) and minor units with textures transitional between these end-members. An extensive HK sheet complex surrounds the pipe. The emplacement of Kelvin is believed to have been initiated by intrusion of this early sheet system. The main pipe-forming event and formation of the dominant KPK pipe infill, KIMB3, was followed by late stage emplacement of additional minor KPK and a hypabyssal to transitional-textured phase along the upper contact of the pipe, cross-cutting the underlying KIMB3. Rb-Sr age dating of phlogopite from a late stage phase has established model ages of 531 ± 8 Ma and 546 ± 8 Ma. Texturally and mineralogically, the Kelvin kimberlite is similar to other KPK systems such as the Gahcho Kué kimberlites and many southern African kimberlites; however, the external morphology, specifically the sub-horizontal inclination of the pipe, is unique. The morphology of Kelvin and the other kimberlites in the Kelvin-Faraday cluster defines a new type of exploration target, one that is likely not unique to the Kennady North Project area. Extensive evaluation work by Kennady Diamonds Inc. has resulted in definition of a maiden Indicated Mineral Resource for Kelvin of 8.5 million tonnes (Mt) of kimberlite at an average grade of 1.6 carats per tonne (cpt) with an average diamond value of US$ 63 per carat (ct).

     

Multi-proxy record of postglacial environmental change, south-central Melville Island, Northwest Territories, Canada

A sediment core from Lake BC01 (75°10.945′N, 111°55.181′W, 225 m asl) on south-central Melville Island, NWT, Canada, provides the first continuous postglacial environmental record for the region. Fossil pollen results indicate that the postglacial landscape was dominated by Poaceae and Salix, typical of a High Arctic plant community, whereas the Arctic herb Oxyria underwent a gradual increase during the late Holocene. Pollen-based climate reconstructions suggests the presence of a cold and dry period ~12,000 cal yr BP, possibly representing the Younger Dryas, followed by warmer and wetter conditions from 11,000 to 5000 cal yr BP, likely reflective of the Holocene Thermal Maximum. The climate then underwent a gradual cooling and drying from 5000 cal yr BP to the present, suggesting a late Holocene neoglacial cooling. Diatom preservation was poor prior to 5000 cal yr BP, when conditions were warmest, suggesting that diatom dissolution may in part be climatically controlled. Diatom concentrations were highest ~4500 cal yr BP but then decreased substantially by 3500 cal yr BP and remained low before recovering slightly in the 20th century. An abrupt warming occurred during the past 70 yr at the site, although the magnitude of this warming did not exceed that of the early Holocene.     

Controls of Biotite Zone Mineral Chemistry in Archaean Meta-Sediments near Yellowknife, Northwest Territories, Canada

Archaean meta-sediments near Yellowknife, Canada, exhibit alow-pressure facies series and broad metamorphic zonation rounda central pluton. Meta-pelites and meta-greywackes from thebiotite zone have been studied using analyses of 59 mineralsand 14 rocks. Mineral compositions were controlled by both host-rockcomposition and metamorphic grade. Increased grade commonly imposed on the minerals a progressivecompositional maturation. This involved progressive compositionalchange (especially in meta-greywacke biotites) and/or narrowingof compositional range (particularly in muscovites). Specificeffects of increased grade are as follows. Biotites in meta-greywackesexhibit increased Mg/Fe and Na/K but decreased (Na+K) content.Biotites in meta-pelites change little except for increasedAl^IV/Si. The muscovites display decreasing maximum Si contents,increased Al^VI at the expense of Fe and Mg, and increased Na/K.The chlorites show only a slight general increase in Mg/Fe. Bulk compositional control is manifested in various ways. Insome instances minerals from subtly different rock types areperceptibly distinct; in others the pro-grade maturation trendsof minerals in these rock types are different. Thus Si is moreabundant in meta-greywacke biotites than in meta-pelite biotitesand (Na+Ba+K) content of muscovites is greater in meta-greywackes. The observed features are used to deduce mechanisms of controlby grade and bulk composition and to discuss general circumstancesunder which they operate.     

The muscovite-melt bathograd and low-P isograd suites in north-central Wopmay Orogen, Northwest Territories, Canada

In north-central Wopmay Orogen, syntectonic low-P(Buchan-type) suites of mineral isograds outline regional metamorphic temperature culminations that are associated, at the higher structural levels, with emplacement of early Proterozoic plutons in the west part of a deformed and eastward transported continental margin prism. The mapped isograds mark the first occurrence of biotite, staurolite, andalusite, sillimanite, sillimanite-K feldspar and K feldspar-plagioclase-quartz ± muscovite (granitic) pods in metapelites, with increasing proximity to the plutons.
Microprobe analyses and field observations have resulted in the formulation of reactions for the 'ideal'pelitic system K₂O-Na₂O-FeO-MgO-Al₂O₃-SiO₂-H₂O-Al₂O₃-SiO₂-H₂O, to account for the various mineral assemblages of each metamorphic zone. A P-T petrogenetic grid showing erosion surface P-T curves for the northern Wopmay Orogen pelites, compiled on the basis of the mapped isograds and the inferred reaction(s) for each metamorphic zone, documents a variation in exposed metamorphic pressure ranging between 2 and 4 kbar.
The configuration of a new bathograd, based on the invariant model reaction sillimanite + K feldspar + plagioclase + biotite + quartz + vapor ± muscovite + liquid and interpolated across three metamorphic suites, is consistent with a major regional structure culmination and with independently determined pressures obtained from anorthite-grossular-quartz-Al₂SiO₅ geobarometry. The positive correlation between the configuration of the bathograd and the structural and pressure culmination points to the pressure-dependence of anatectic-granitic-pod mineral associations.     

Uranium-thorium enrichment in alkali olivine basalt magma — Simpson Islands dyke,Northwest Territories Canada

Uranium, thorium and potassium show parallel trends of geochemical enrichment in a differentiated dyke exposed on the Simpson Islands, in Great Slave Lake, Northwest Territories, Canada. Uranium ranges from 0.46 to 4.5 ppm, thorium from 2.2 to 22.6 ppm and K₂O from 0.81 to 8.00%. The correlation coefficient between U and K₂O is +0.985.The dyke is composite, with an early phase of olivine gabbro and the main phase ranging from gabbro to syenite. The inferred parental magma is a potassic olivine basalt. The proposed petrogenetic scheme includes partial melting (5% or less) of upper mantle, gravitational differentiation of the melt within the upper mantle and progressive intrusions of mafic to felsic fractions into a dilational fracture related to the rifting of the Athapuscow aulacogen 2200 m.y. years ago. The uppermost (eastern) levels of intrusion have been removed by erosion. Magmatic concentration of uranium and thorium beyond the levels reported may have occurred in the latest differentiates.     

Temporal, geomagnetic and related attributes of kimberlite magmatism at Ekati, Northwest Territories, Canada

This paper outlines the development of a multi-disciplinary strategy to focus exploration for economic kimberlites on the Ekati property. High-resolution aeromagnetic data provide an over-arching spatial and magnetostratigraphic framework for exploration and kimberlite discovery at Ekati, and hence also for this investigation. The temporal, geomagnetic, spatial and related attributes of kimberlites with variable diamond content have been constrained by judiciously augmenting the information gathered during routine exploration with detailed, laboratory-based or field-based investigations. The natural remanent magnetisation of 36 Ekati kimberlites has been correlated with their age as determined by isotopic dating techniques, and placed in the context of a well-constrained geomagnetic polarity timescale. Kimberlite magmatism occurred over the period 75 to 45 Ma, in at least five temporally discrete intrusive episodes. Based on current evidence, the older kimberlites (75 to 59 Ma) have low diamond contents and are distributed throughout the property. Younger kimberlites (56 to 45 Ma) have moderate to high diamond contents and occur in three distinct intrusive corridors with NNE to NE orientations. Economic kimberlite pipes erupted at 55.4±0.4 Ma along the A154-Lynx intrusive corridor, which is 7 km wide and oriented at 015°, and at 53.2±0.3 Ma along the Panda intrusive corridor, which is 1 km wide and oriented at 038°. The intrusion ages straddle a paleopole reversal at Chron C24n, consistent with the observation that the older economic kimberlites present as aeromagnetic “low” anomalies while the younger economic pipes are characterised as aeromagnetic “highs”. The aeromagnetic responses for these kimberlites are generally muted because they contain volcaniclastic rock types with low magnetic susceptibility. Kimberlites throughout the Ekati property carry a primary natural magnetic remanence (NRM) vector in Ti-bearing groundmass magnetite, and it dominates over vectors related to induced magnetisation. Magnetostratigraphic correlation of Ekati kimberlites may therefore present a powerful adjunct to existing exploration techniques, mainly because the diamond content of Ekati kimberlites apparently is related more to the age of eruption than to any other parameter investigated in this work.     

Holocene insect fossils from two sites at Ennadai Lake, Keewatin, Northwest Territories, Canada

Ennadai Lake, in the forest-tundra ecotonal region of Keewatin, Northwest Territories, Canada, has been the subject of several paleoecological investigations (palynology, plant macrofossils, fossil soils). This study concerns Holocene insect fossils at Ennadai, a new approach in a region shown to be sensitive to climatic change. The Ennadai I site yielded 53 taxa, representing 13 families of Coleoptera and 7 families of other insects and arachnids, including abundant ants. These fossils range in age from about 6300 to 630 yr B.P. The Ennadai II site produced fossils of 58 taxa, including 13 beetle families and 15 families of other arthropods, ranging in age from 4700 to 870 yr B.P. The insect evidence suggests the presence of trees in the Ennadai region from 6000 to 2200 yr B.P. A conifer pollen decline from 4800 to 4500 yr B.P. at Ennadai has previously been interpreted as an opening up or retreat of forest in response to climatic cooling, but the insect fossils reveal the continued presence of trees during this interval. Both insect assemblages suggest trends of forest retreat and tundra expansion between about 2200 and 1500 yr B.P., presumably due to climatic cooling, with a return of woodland by about 1000 yr B.P.     

Sulfate yields and isotopic ratios of sulfate sulfur in rivers of the Northwest Territories,Canada

Rivers in the Northwest Territories draining the Canadian Shield in the zone of continuous permafrost have sulfate yields ranging from 3 to 6 meq m⁻² yr⁻¹. Stable isotope ratios of sulfate sulfur from these rivers range from −0.91 to +7.01%. The negative value obtained for the Quoich River may indicate the presence of reduced sulfur compounds in its watershed. Results for the Tree. Ellice and Back Rivers may have been influenced by seasalt. Results for the other rivers are very similar to those obtained for surface waters at lower latitudes (47°N), indicating that the processes affecting the isotopic ratios of sulfate sulfur in surface waters operate similarly at 65°N and at 47°N.     

Mineralogy of primary carbonate-bearing hypabyssal kimberlite, Lac de Gras, Slave Province, Northwest Territories, Canada

A suite of fresh, Late Cretaceous to Eocene hypabyssal kimberlites from the Lac de Gras field were studied in order to understand better carbonate, silicate and oxide paragenesis. The samples have excellent preservation of textures and primary mineralogy and are archetypal or Group 1 kimberlite. Five kimberlite localities are identified as calcite-bearing based on the presence of high Sr–Ba calcite as phenocrysts, microphenocrysts and in segregations. Three kimberlite localities are identified as dolomite-bearing based on the presence of mixed calcite–dolomite segregations containing oscillatory and banded textures of calcite–dolomite solid solution and dolomite (±magnesite). Sr–Ba calcite are characterized by high X_Ca (>0.95) and are enriched in Sr (4900–11,100 ppm) and Ba (3200–14,200 ppm). The calcite–dolomite and dolomite–magnesite solid solution compositions span the X_Ca range from 0.42 to 0.95, and typically have Sr and Ba contents in the range of 1000–4000 ppm. The carbonate, silicate and oxide mineral compositions suggest that the origin of the calcite-bearing versus dolomite-bearing kimberlites studied is related to subtle differences in parent magma composition, in particular, the CO₂/H₂O ratio. Formation of the carbonates reflects the latter part of a protracted magmatic crystallization sequence, in which Sr–Ba calcite precipitates from an evolved kimberlite melt. Subsequently, calcite–dolomite solid solution and dolomite is precipitated from localized, Mg-rich carbonate fluids at relatively high temperatures (higher than serpentine stability).     

Emergent coasts of Akimiski Island,James Bay,Northwestern Territories,Canada: geology,geomorphology, and vegetation

Akimiski Island contains good examples of emergent coastal landscapes of a cold mesotidal inland sea. The Paleozoic reefal trend of the Attawapiskat Formation dictated the overall shape and the main structure of the island. Differential erosion and deposition by Pleistocene glaciers have fluted the island in a north-south direction. That surface was later modified by emergent landforms developed in the last 3500–4000 yrs.The modern steeper southern area reaches an elevation of 60 m approximately 3 km inland from the southern shoreline, and contains well-developed sandy and gravelly longitudinal beach ridges and spits, now inactive and covered by a lichen-rich taiga (boreal forest). The flatter, northern part of the island shows a wide transition between the primarily erosional, sand-starved, coastal marshland and the inland organic-rich fens. Partially paludified longitudinal and transversal beach ridges subdivide those northern flat wetlands forcing a straight course to the north-flowing streams.The vegetation zonations of the marshes are as varied as the coasts, facing different oceanographic conditions. Longshore and tidal currents affect the western and southern coasts greatly. Tides, waves and sea ice affect the others more. The marshes resemble those of the mainland in having well-defined Puccinellia phryganodes lower marsh, Carex subspathacea upper marsh, and peat-forming coastal fens. Some components of the marshes of the island, such as isolated mounds with vegetation minisequences, incipient permafrost features generated by seasonal frozen ground conditions, and intense grazing by large populations of geese, are typical of cold settings, more commonly found along mainland coasts farther to the north in James Bay and Hudson Bay.