共查询到20条相似文献,搜索用时 15 毫秒
1.
The best way of reducing roll motion is by increasing roll damping. Bilge keels are the most common devices for increasing roll damping. If more control is required, anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. Our objective is to develop design procedures for passive tanks for roll reduction in rough seas. This paper focuses on the design of passive U-tube tanks. The tank-liquid equation of motion is integrated simultaneously with the six-degree-of-freedom (6DOF) equations of the ship motion. The coupled set of equations is solved by using the Large Amplitude Motion Program ‘LAMP’, which is a three-dimensional time-domain simulation of the motion of ships in waves. The unstabilized and stabilized roll motions of a S60-70 ship with forward speed and beam waves have been analyzed. For high-amplitude waves, the unstabilized roll angle exhibits typical nonlinear phenomena: a shift in the resonance frequency, multi-valued responses, and jumps. The performance of a S60-70 ship with a passive tank is investigated in various sea states with different encounter wave directions. It is found that passive anti-roll tanks tuned in the linear or nonlinear ranges are very effective in reducing the roll motion in the nonlinear range. The effect of the tank damping, frequency, and mass on the tank performance is studied. Also, it is found that passive anti-roll tanks are very effective in reducing the roll motion for ships having a pitch frequency that is nearly twice the roll frequency in sea states 5 and 6. 相似文献
2.
In this paper our previously developed advanced system identification technique [1] has been applied to extract the frequency dependent roll damping from a series of model tests run in irregular (random) waves. It is shown that this methodology accurately models the roll damping which can then be used to produce accurate predictions of the ships roll motion. These roll motion predictions are not only more accurate than the potential flow predictions but more accurate than potential flow models corrected using either empirical prediction methods [2] and even those corrected using roll damping obtained from free decay sallying experiments. This methodology has the potential to significantly improve roll motion prediction during full scale at sea trails of vessels in order to dramatically improve safety of critical operations such as helicopter landing or ship to ship cargo transfer. 相似文献
3.
In order to predict the roll motion of a floating structure in irregular waves accurately, it is crucial to estimate the unknown damping coefficients and restoring moment coefficients in the nonlinear roll motion equation. In this paper, a parameter identification method based on a combination of random decrement technique and support vector regression (SVR) is proposed to identify the coefficients in the roll motion equation of a floating structure by using the measured roll response in irregular waves. Case studies based on the simulation data and model test data respectively are designed to validate the applicability and validity of the identification method. Firstly, the roll motion of a vessel is simulated by using the known coefficients from literature, and the simulated data are used to identify the coefficients in the roll motion equation. The identified coefficients are compared with the known values to validate the applicability of the identification method. Then the roll motion is predicted by using the identified coefficients. The prediction results are compared with the simulated data, and good agreement is achieved. Secondly, the model test data of a FPSO are used to identify the coefficients in the roll motion equation. Then the random decrement signature of the roll motion is predicted by using the identified coefficients and compared with that obtained from the model test data, and satisfactory agreement is achieved. From this study, it is shown that the identification method can be effectively applied to identify the coefficients in the nonlinear roll motion equation in irregular waves. 相似文献
4.
J.A. Pinkster 《Ocean Engineering》1979,6(6):593-615
A recently developed method, based on three-dimensional potential theory, to compute the mean wave drifting forces on a free floating structure in regular waves, is extended to include low frequency oscillatory components which arise when the structure is floating in regular wave groups consisting of two regular waves with small difference frequency. This completes the information necessary for the determination of the wave drifting forces under arbitrary irregular wave conditions.In regular wave groups the drifting forces not only depend on the first order velocity potential and the first body motions, but also on the wave exciting forces due to the low frequency part of the second order potential. For the general three-dimensional case the latter contribution can only be determined numerically and at the expense of long computation times. Since this contribution is generally not large compared to components which may be determined using linear potential theory it is included using a simple approximation. Results of the method of approximation are compared with some two-dimensional cases for which exact solutions are known.Results of computations of the total mean and low frequency surge forces on a rectangular barge and a column stabilized semi-submersible platform are presented. For both structures, the computed mean surge drifting forces in regular head waves are compared with results of model tests.The computed components of the total mean drifting forces are presented. It appears that for both the barge and the semi-submersible the same components are of importance.For the semi-submersible, the computed low frequency second order surge forces in head waves are compared with results obtained from a test in irregular head waves using cross-bispectral analysis methods. 相似文献
5.
The behavior of a highly deformable membrane to ocean waves was studied by coupling a nonlinear boundary element model of the fluid domain to a nonlinear finite element model of the membrane. The hydrodynamic loadings induced by water waves are computed assuming large body hydrodynamics and ideal fluid flow and then solving the transient diffraction/radiation problem. Either linear waves or finite amplitude waves can be assumed in the model and thus the nonlinear kinematic and dynamic free surface boundary conditions are solved iteratively. The nonlinear nature of the boundary condition requires a time domain solution. To implicitly include time in the governing field equation, Volterra's method was used. The approach is the same as the typical boundary element method for a fluid domain where the governing field equation is the starting point. The difference is that in Volterra's method the time derivative of the governing field equation becomes the starting point.The boundary element model was then coupled through an iterative process to a finite element model of membrane structures. The coupled model predicts the nonlinear interaction of nonlinear water waves with highly deformable bodies. To verify the coupled model a large scale test was conducted in the OH Hinsdale wave Research Laboratory at Oregon State University on a 3-ft-diameter fabric cylinder submerged in the wave tank. The model data verified the numerical prediction of the structure displacements and of the changes in the wave field.The boundary element model is an ideal modeling technique for modeling the fluid domain when the governing field equations is the Laplace equation. In this case the nonlinear boundary element model was coupled with a finite element model of membrane structures, but the model could have been coupled with other finite element models of more rigid structures, such as a pontoon floating breakwater. 相似文献
6.
This paper has shown a numerical motion simulation method which can be employed to study on parametric rolling of ships in a seaway. The method takes account of the main nonlinear terms in the rolling equation which stabilize parametric rolling, including the nonlinear shape of the righting arm curve, nonlinear damping and cross coupling among all 6 degrees of freedom. For the heave, pitch, sway and yaw motions, the method uses response amplitude operators determined by means of the strip method, whereas the roll and surge motions of the ship are simulated, using nonlinear motion equations coupled with the other 4 degrees of freedom. For computing righting arms in seaways, Grim's effective wave concept is used. Using these transfer functions of effective wave together with the heave and pitch transfer functions, the mean ship immersion, its trim and the effective regular wave height are computed for every time step during the simulation. The righting arm is interpolated from tables, computed before starting the simulation, depending on these three quantities and the heel angle. The nonlinear damping moment and the effect of bilge keels are also taken into account. The numerical simulation tool has shown to be able to model the basic mechanism of parametric rolling motions. Some main characteristics of parametric rolling of ships in a seaway can be good reproduced by means of the method. Comprehensive parametric analyses on parametric rolling amplitude in regular waves have been carried out, with that the complicated parametric rolling phenomena can be understood better. 相似文献
7.
The coupled system of two side-by-side fixed and/or floating bodies interacting with a large amplitude nonlinear wave is studied using a direct time domain solution method. The numerical model is based on a three-dimensional mixed Eulerian–Lagrangian (MEL) method under certain simplifying approximations permitting Rankine panel scheme to be implemented over a time-invariant boundary surface to solve the boundary value problem for the unknown velocity potentials. A 4th order Adams–Bashforth–Moulton scheme is used for time marching of rigid-body motion histories of the individual bodies and evolution of the free-surface including the gap region in which large resonant fluid motions occur. A systematic study has been carried out to evaluate the performance of the developed time domain method in simulating the forces and motions as well as the fluid motion in the gap region for the two body system under various arrangements and in different wave-headings. At first, the computed numerical results have been validated and verified with computational and experimental results available in literature for standard geometries such as vertical truncated cylinders and rectangular boxes. Secondly, effectiveness of the damping lid model which is introduced to suppress wave resonance in the gap region is investigated including its influence on maximum sway forces on fixed and floating rectangular barges in side-by-side configurations. Thirdly, comparative studies on absolute and relative motion response for two cases (two rectangular barges, and a FLNG-FPSO + shuttle tanker) in side-by-side arrangement are detailed to bring out the importance of nonlinearities arising due to steep nonlinear incident waves. Finally, coupled motions of the two-body system of an FPSO and a shuttle tanker floating in side-by-side configuration in a steep nonlinear wave field are studied in which the two bodies are connected through hawsers, and also the FPSO is moored to the ground. Additionally there is a fender between the two bodies. 相似文献
8.
Statistics of nonlinear wave crests and groups 总被引:1,自引:0,他引:1
Groups of large nonlinear waves with sharper higher crests can pose hazards to ships, induce harbor resonance and cause wave-overtopping of fixed and floating structures. Past interest in wave groups has mostly been focused on the statistics and modeling of linear wave groups. Studies on nonlinear wave groups are surprisingly few, and address deep water waves only. Here, statistics of nonlinear wave crests and wave-crest groups in deep and transitional water depths are considered, using an appropriate second-order representation for crest heights and the continuous wave-envelope approach. In particular, theoretical expressions describing the statistics of nonlinear wave crests and their groups are posed in the form of a simple second-order transformation of well-known results on linear waves. Predictions from the transformation so posed compare well with nonlinear wave data gathered in the North Sea, and demonstrate that nonlinearities do affect the statistics of large wave crests and their groups significantly. 相似文献
9.
10.
11.
A plate submerged at a certain depth underneath the sea surface has been proposed as a structure type for different purposes, including motion response reduction, wave control, and wave energy harvesting. In the present study, the three-dimensional wave radiation problem is investigated in the context of the linear potential theory for a submerged ring plate in isolation or attached to a floating column as an appendage. In the latter case, the ring plate is attached at a certain distance above the column bottom. The structure is assumed to undergo a heave motion. An analytical model is developed to solve the wave radiation problem via the eigenfunction expansion method in association with the region-matching technique. With the velocity potential being available, the hydrodynamic coefficients, such as added mass and radiation damping, are obtained through the direct pressure integration. An alternative solution of radiation damping has also been developed in this study, in which the radiation damping is related to the Kochin function in the wave radiation problem. After validating the present model, numerical analysis is performed in detail to assess the influence of various plate parameters, such as the plate size and submergence depth. It is noted that the additional added mass due to the attached ring plate is larger than that when the plate is in isolation. Meanwhile, the radiation damping of the column for the heave motion can vanish at a specific wave frequency by attaching a ring plate, corresponding to a condition that there exist no progressive waves in the exterior region. 相似文献
12.
The large roll motion of ships sailing in the seaway is undesirable because it may lead to the seasickness of crew and unsafety of vessels and cargoes, thus it needs to be reduced. The aim of this study is to design a rudder roll stabilization system based on Radial Basis Function Neural Network (RBFNN) control algorithm for ship advancing in the seaway only through rudder actions. In the proposed stabilization system, the course keeping controller and the roll damping controller were accomplished by utilizing modified Unscented Kalman Filter (UKF) training algorithm, and implemented in parallel to maintain the orientation and reduce roll motion simultaneously. The nonlinear mathematical model, which includes manoeuvring characteristics and wave disturbances, was adopted to analyse ship’s responses. Various sailing states and the external wave disturbances were considered to validate the performance and robustness of the proposed roll stabilizer. The results indicate that the designed control system performs better than the Back Propagation (BP) neural networks based control system and conventional Proportional-Derivative (PD) based control system in terms of reducing roll motion for ship in waves. 相似文献
13.
The most common method of reducing roll motion of ship-shaped floating systems is the use of bilge keel which act as damping elements. The estimation of the damping introduced by bilge keel is still largely based on empirical methods. The present work adopts the CFD approach to the estimation of roll damping, both without and with bilge keel and validates the results with experiments conducted in a wave flume. Specifically, free oscillation tests are conducted at model scale to obtain roll damping, both by experiments and CFD simulation and reasonably good comparisons are obtained. The experiments also include PIV study of the flow field and attempt has been made to correlate the measured flow field with that obtained by CFD. The CFD methodology has the potential to determine rationally the size and orientation of bilge keels in design with reasonably accurate estimate of the additional roll damping that it provides to ship's roll motion. 相似文献
14.
M. Söylemez 《Ocean Engineering》1996,23(5):423-445
This paper presents the derivation of a general method for calculating wave forces on the cylindrical members of offshore structures. By means of the proposed method one can calculate the wave loading on cylindrical members of fixed or floating offshore structures orientated randomly in waves. This method of calculating wave forces is based on the linear Airy wave theory. Calculation procedure of wave force components is presented in great detail on the basis of wave particle kinematic properties obtained from the linear Airy wave theory. In the procedure of calculating wave forces presented, definitions of the wave reference system for propagating wave, the structure reference system for the platform and the member reference system for the tubular members of the structure are first established, and then the calculation of wave forces is given in terms of its components, which are pressure, acceleration and velocity forces, including current forces. At the end of the paper, expressions of total heave, sway and surge forces and total roll, pitch and yaw moments acting on the platform are given as a sum of these forces acting on each member of the platform. The calculation procedure derived in this paper provides a very efficient means of calculating wave forces and moments during the time-domain simulations of a floating platform experiencing large amplitude motion in intact, progressive flooding and damaged conditions. Comparisons of the predictions with the measurements which will be presented elsewhere reveal that the calculation procedure developed can predict large amplitude oscillatory and steady motion characteristics of an intact and damaged platform in waves with an acceptable degree of accuracy. 相似文献
15.
概念性地设计了一种新型半潜式海上风力机基础,确定了结构的型式和尺寸,对风浪联合作用下不同工况的风力机基础稳性进行了校核.考虑黏性阻尼和二阶波浪力的作用,计算分析了风力机基础的水动力系数、幅频运动以及动力响应特性.结果表明,经过改进的新型风力机基础具有良好的稳性和水动力性能,特别是在垂荡性能上有大幅的提升.波浪入射角度对垂荡的影响不大,但对其他自由度RAOs影响较大.垂荡、横摇和纵摇RAOs均存在一个主峰值和次峰值,但峰值周期均远离波能集中区.此外还发现,不同工况下风浪入射角对风机系统的动力响应和系泊力均有较大影响,相对于工作工况,极端工况下所受风荷载较小,但是系泊力更大. 相似文献
16.
The paper studies the parametric stochastic roll motion in the random waves. The differential equation of the ship parametric roll under random wave is established with considering the nonlinear damping and ship speed. Random sea surface is treated as a narrow-band stochastic process, and the stochastic parametric excitation is studied based on the effective wave theory. The nonlinear restored arm function obtained from the numerical simulation is expressed as the approximate analytic function. By using the stochastic averaging method, the differential equation of motion is transformed into Ito's stochastic differential equation. The steady-state probability density function of roll motion is obtained, and the results are validated with the numerical simulation and model test. 相似文献
17.
The prediction of ship stability during the early stages of design is very important from the point of vessel’s safety. Out of the six motions of a ship, the critical motion leading to capsize of a vessel is the rolling motion. In the present study, particular attention is paid to the performance of a ship in beam sea. The linear ship response in waves is evaluated using strip theory. Critical condition in the rolling motion of a ship is when it is subjected to synchronous beam waves. In this paper, a nonlinear approach has been tried to predict the roll response of a vessel. Various representations of damping and restoring terms found in the literature are investigated. A parametric investigation is undertaken to identify the effect of a number of key parameters like wave amplitude, wave frequency, metacentric height, etc. 相似文献
18.
大型多连通域浮式平台的典型代表是大型海上旅游浮式综合体,依据概念设计,开展大型多连通域浮式平台的波浪载荷水池模型试验研究,试验对不同海况下4种典型多连通域浮式平台方案进行波浪载荷测量,包括剖面的垂向弯矩、水平弯矩和扭矩等,通过观察试验现象和分析测量数据,获得了不同方案大型多连通域浮式平台的波浪载荷特性。试验结果表明:由于平台质量大、振动阻尼大,所以高频载荷成分小;平台在自由状态下载荷值基本都小于平台只释放垂荡状态载荷值;在方案四高波高状态下,平台波浪载荷的高频成分包含了波浪的非线性、约束柱与平台之间的耦合、平台自身的高频振动等。研究成果可为大型海上旅游浮式综合体的结构设计提供设计载荷输入,支撑平台的强度校核评估。 相似文献
19.
The slow drift motion of a floating body in a two-dimensional wave field has been investigated using a time-domain, fully nonlinear numerical model with non-reflective open boundaries. Preliminary computations were conducted for incident bichromatic waves, in which wave theories with different orders were applied in generating the waves required. The results show that the use of low-order theories generates undesirable free waves, and that fourth-order terms contribute markedly to low-frequency input. The motion of a rectangular floating body in response to nonlinear bichromatic waves was computed. The numerical results for small-amplitude incident waves agree reasonably well with the second-order approximation for both the steady and difference-frequency (Δσ) components in the body's motion. For relatively large waves, however, the 2Δσ component becomes predominant compared with the Δσ component. The motion of the body in irregular waves with different wave parameters has also been presented in order to discuss the validity range of a second-order approximation. 相似文献
20.
Nonlinear behaviors of a free-floating body in waves were experimentally investigated in the present study. The experiments were carried out for 6 different wave heights and 6 different wave periods to cover a relatively wide range of wave nonlinearities. A charge-coupled device (CCD) camera was used to capture the real-time motion of the floating body. The measurement data show that the sway, heave and roll motions of the floating body are all harmonic oscillations while the equilibrium position of the sway motion drifts in the wave direction. The drift speed is proportional to wave steepness when the size of the floating body is comparable to the wavelength, while it is proportional to the square of wave steepness when the floating body is relatively small. In addition, the drift motion leads to a slightly longer oscillation period of the floating body than the wave period of nonlinear wave and the discrepancy increases with the increment of wave steepness. 相似文献