宁夏羊场湾煤矿浅埋煤层开采地面塌陷发育规律及形成机理

以宁夏羊场湾煤矿Y110207工作面为研究对象,采用无人机遥感技术、野外调查与有限差分软件模拟方法研究浅埋煤层开采的地面塌陷类型、发育规律及其形成机理。(1)浅埋煤层开采地面塌陷以地表裂缝发育为主,地表破坏严重。(2)平行切眼裂缝间隔性出现,展布于整个工作面内,间隔距离为10～120m,局部裂缝形成错台高度约为15cm。平行顺槽裂缝为拉张型裂缝,发育在顺槽至外围一定范围。(3)采煤活动导致地下形成采空区,上覆岩层发生移动破坏,破坏区分为剪切破坏区、拉张破坏区及剪-拉破坏区,分别对压应力区、拉应力区和压-拉转化区。(4)当应力扰动传递至地表,应力值超过覆盖层抗拉强度时地表产生裂缝。随着工作面推进,覆岩内部裂缝带上行裂缝与地表下行裂缝贯通,形成错台。研究成果丰富了该区浅埋煤层的地面塌陷理论知识,为地面塌陷防治提供了理论依据。     

Mine subsidence damage from room and pillar mining in Illinois

Summary Data is presented on case histories of subsidence damage occurring over abandoned room and pillar mines in Illinois. The major modes of behaviour and damage in houses from sag-subsidence are described and summarized. The houses rested on crawl-space and basement foundations built from concrete and masonry. The prevalent mode of failure of bearing walls was inward bending. Failure is analysed and conventional design procedures are used to evaluate foundation failure.     

Research on reasonable coal pillar width of roadway driven along goaf in deep mine

Driving roadway along a goaf is commonly adopted for mining face of thick seam in a deep mine. Determining a reasonable width of coal pillar is a key scientific problem for driving roadway along a goaf in a deep mine. The paper took a roadway driven along a goaf at Zhaolou coal mine which is a typical kilometer-deep mine in China as engineering background. Field monitoring, model test, and numerical experiment are conducted. Stress and displacement evolution mechanism are analyzed with different pillar widths. The test results show that with the increase of coal pillar width, the peak stress value at the coal pillar working slope and integrated coal beside the roadway increases firstly and then tends to be stable, its position is transferred to the side of the roadway, and the deformation of coal pillar decreases gradually during roadway excavation. The coal pillar deformation and roadway vertical displacement increased as the coal pillar width increases under high abutment pressure. In order to reduce the waste of non-renewable resources and meet the requirements of bearing capacity and stability of coal pillars, a method is proposed for setting a reasonable width of coal pillars and the specific width of coal pillars is designed and applied in engineering practices based on the above research. All the tests are significant in the study of driving roadway along a goaf in a deep mine.     

深部开采地表沉陷规律模拟研究

通过对煤矿深部开采沉陷的结构力学模型研究,提出了盆地水平煤层地表沉陷的理论预测模型,给出了整体和分步两种近似计算方法。在变动煤层开采深度和工作面长度的条件下,采用数值模拟方法对相关的数据进行了拟合计算对比,并基于现场沉陷观测数据对模型进行了验证。新模型方法结合力学模型计算得出开采沉陷预计参数,可以针对上覆岩层的力学参数对所得预测数据给出合理的力学解释,摆脱了经典预计模型概率积分法只依靠统计方法预测结果的缺陷,可为深部安全开采和地表沉陷的预测与控制,提供可靠的科学依据     

淮南潘一矿采煤塌陷积水区水环境健康风险评估

以淮南潘一矿塌陷积水区为例,分析测试了塌陷积水区12个采样点水样中的7种重金属元素（Cr、Cd、Zn、Cu、Pb、Ni和Fe）的含量,采用美国环保局（USEPA）推荐的水环境健康风险评价模型,对重金属由食入途径进入人体所引起的健康风险进行评估和分析。研究发现,研究区水体中重金属致癌风险值为（5.06~8.06）×10^-6/a,根据我国环境保护部推荐的健康风险标准,存在健康风险。其中,Cr的致癌风险占总致癌风险的98.52%。非致癌健康风险值在10^-10/a的数量级,健康风险不明显,而非致癌健康风险的贡献大小顺序为,Cu > Pb > Fe > Cr > Cd > Ni > Zn。其中,Cu的贡献率最大,占非致癌总风险值的48.62%。同时还发现,研究区的重金属致癌风险占总健康风险的99.99%,这表明该区域总的水质健康风险几乎全部由致癌风险构成,而致癌风险中又几乎由Cr组成。     

坚硬顶板薄煤层条带开采技术在杨庄煤矿中的应用

杨庄煤矿村庄下压煤具有典型的坚硬顶板薄煤层特点，具有控制地面沉降，保护地面设施的有利条件，在矿井地质与水文地质条件较为复杂的情况下，对村庄下压煤选择了条带开采技术，成功地解决了村庄下大量压煤和村庄下不搬迁开采问题，为该村庄下压煤开采积累了经验。     

基于四旋翼无人机的宁夏羊场湾煤矿采煤沉陷量监测

小型无人机遥感技术具有成本低、操作灵活便利等优点,在地质调查中的作用愈来愈重要。采煤地表沉陷量变形监测是掌控采煤地表岩移变形规律和治理塌陷的关键性工作。重点探索四旋翼无人机遥感技术监测在羊场湾煤矿Y120212工作面采煤沉陷量的监测研究,通过野外踏勘与控制点布设、无人机航线规划与执行、4D产品制作的工作程序和监测方法,探索无人机遥感技术监测在矿山地质塌陷监测的应用。研究结果表明,通过对无人机遥感技术生成的DSM处理,经过多期地面高程的对比,得到Y120212工作面最大沉陷量达6.5m。结合分析、对比,无人机遥感技术可以实现采煤塌陷区地表沉陷变形监测,进而形成和发展了煤矿地面塌陷新的监测技术。     

芦沟煤矿32采区水体下采煤的可行性

芦沟煤矿32采区大部分位于五星水库水体下,为了提高煤炭资源的回收率,通过导水裂缝带高度计算及地表移动变形的预计,对芦沟煤矿32采区水体下采煤的可行性进行了研究。结果显示,32采区煤炭开采不会对水库的水体造成直接的影响,32采区在水体下采煤是可行的。建议在采掘过程中加强断层及水文地质勘探,留设合理的防隔水煤柱;根据地质采矿条件,采用合理的开采速度。     

Grout injection into bed separation to control surface subsidence during longwall mining under villages: case study of Liudian coal mine,China

Surface subsidence can cause many environmental problems and hazards (including loss of land area and damage to buildings), and such hazards are particularly serious in coal mining districts. Injecting grout into the bed separation in the overburden has been proposed as an effective control measure against surface subsidence during longwall mining. However, no field trials of this technique have been implemented in mines under villages in China, and thus, its ability to control subsidence in such areas has yet to be demonstrated. In this study, field trials using this technique were carried out during longwall mining under villages in the Liudian coal mine, China. The maximum surface subsidence observed after the extraction was only 0.298 m, which accounts for 10 % of the mining height and is 79 % less than the predicted subsidence. Moreover, no damage occurred to the village buildings either during or after extraction and these buildings remain stable. Thus, this study represents the first successful attempt to control surface subsidence under villages in China using grout injection during longwall mining.     

固体密实充填开采地表沉陷预计模型研究

为了实现对固体密实充填开采地表沉陷进行科学地预计,需要根据其覆岩结构形态演化规律和岩层移动特征建立完备的沉陷预计模型及其参数体系。相似材料模拟和钻孔窥视表明,固体密实充填开采覆岩形态以完整层状结构的弯曲带为主,覆岩仅在近顶板附近发育一定高度的断裂带,不发生垮落现象。岩层移动特征类似纵向载荷作用下层合板的弯曲变形,通过力学简化,基于层合板理论建立了固体密实充填开采地表沉陷预计模型。研究表明,固体密实充填开采地表沉陷形态仍可用概率积分模型进行描述,并进一步探讨了基于“等价釆高”的固体密实充填开采地表沉陷预计模型参数体系。最后将本文建立的地表沉陷预计模型应用于某工程实例,取得了良好的效果。     

GPS/terrestrial 3D laser scanner combined monitoring technology for coal mining subsidence: a case study of a coal mining area in Hebei, China

In order to overcome the shortage that point-based data acquisition techniques cannot retrieve the whole basin subsidence caused by underground mining, and to avoid complex splicing of terrestrial 3D laser scanner (TLS) point cloud data and the errors caused by such splicing, GPS/TLS combined technology is employed for mining subsidence monitoring. The basic idea of the monitoring technology is put forward. In this article, an application of the method to a coal mining area in China is presented. Support vector machine (SVM) model for GPS level conversion in the mining area is established, and a comparative analysis of SVM, BP neural network and polynomial established local quasi-geoid in the mining area is conducted. Ground surface digital elevation model (DEM) of the mining area is established by using TLS point cloud data, and the ground surface dynamic subsidence basin is obtained through a subtraction of two DEMs. The results indicate that the quasi-geoid established by using SVM model features a relatively high level of stability and accuracy and that the established mining surface DEM and subsidence basin can provide the fundamental data for the reconstruction of ecological environment in the mining area. GPS/TLS combined monitoring technology is a new monitoring technology, which entangles the advantages of both GPS and TLS and could offset their disadvantages, thus obtaining complementary advantages. According to analysis on its application in the mining area, we conclude that the technology is feasible and has a great application prospect for the mining area purposes.     

条带煤柱设计的强度准则效应研究

条带开采广泛应用于深部煤层,合理的条带煤柱尺寸对提高煤炭采出率和保护地表地貌都具有十分重要的意义。通过总结平面应变状态下Wilson准则、Mohr-Coulomb(M-C)准则、广义Matsuoka-Nakai(M-N)准则、广义Lade-Duncan(L-D)准则和外接圆Drucker-Prager(D-P)准则等5种强度准则的统一表达式,进而建立条带煤柱的极限强度、屈服宽度和留设宽度的统一计算公式,探究条带煤柱设计的强度准则效应,并得出煤层黏聚力和内摩擦角的影响特性。研究结果表明：建立的统一计算式涵盖文献已有解,且应用非常方便;条带煤柱设计的强度准则效应显著,Wilson准则和M-C准则的结果过于保守,外接圆D-P准则应用需谨慎,应优先选用广义M-N准则或广义L-D准则;煤层黏聚力和内摩擦角对条带煤柱设计的影响明显,应充分考虑煤层的强度参数变化。该研究结果可为条带煤柱的合理设计与施工提供一定的理论指导。     

大台井深部岩巷岩爆发生机理与预防措施研究

大深度、高地应力下的岩巷岩爆问题是煤炭企业面临的重大技术难题。根据大台井深部岩巷发生的岩爆现象,分析了深部岩巷岩爆发生的机理。通过计算得出大台井深部岩巷岩爆发生的临界深度为723 m。指出发生岩爆的主要因素是深部开采和复杂的地质构造所致,采用合理的巷道布置,选择合适的断面形状,使用锚网喷支护方式,可以预防岩爆的发生,避免人员伤亡,提高掘进速度的作用,达到安全快速掘进的目的。     

南屯煤矿下组煤开采水文地质条件

分析了兖州南屯煤矿下组煤开采的水文地质条件,绘制了下组煤灰岩厚度等值线图、单位涌水量等值线图、灰岩含水层渗透系数等值线图、14灰至奥陶系间距等值线图,分析了隔水层、断裂导水的可能性,总结了南屯煤矿下组煤水害特征以及对安全生产产生的影响特性.     

Climate change mitigation in the coal mining industry: low-carbon pathways and mine safety indicators

Natural Hazards - As China’s major energy source, the coal sector contributes to a significant portion of China’s greenhouse gas emissions, and the industry faces huge pressure in...     

基于室内试验的条带煤柱稳定性研究

对建新矿13煤进行了室内力学性质研究,研究了煤岩的尺寸效应,得到了建新矿13煤煤岩体单轴抗压强度为 6.928 MPa;进行三轴压缩试验确定该层煤符合摩尔-库仑弹塑性力学模型。以试验研究结果为基础,结合建新矿的实际情况,在选定采出条带宽度25 m时,应用FLAC3D对条带开采进行煤柱应力和地表最大下沉分析,并研究煤柱稳定性。结果表明选择20 m宽度的煤柱时,可以保持煤柱稳定性。基于室内煤岩试验研究的结果,采用数值模拟的方法,通过多方案条带开采研究煤柱安全性,在减小煤柱尺寸的同时,确保煤柱安全稳定,避免仅仅使用经验公式计算带来的盲目性。     

A mathematical programming approach for scheduling equipment in a surface coal mining operation

Summary A mathematical programming model for scheduling open pit mining was developed and validated using data from a surface mining operation. A two-phase solution procedure was used involving repeated evaluations of an integer scheduling model and a simple transportation model.     

Reduction of surface subsidence risk by fly ash exploitation as filling material in deep mining areas

The possibility of filling empty underground spaces, which exist owing to the extraction of mineral raw materials, with fly ash and cement fly ash mixes has been studied for the purpose of reducing the impact of deep mining on the surface. The method of physical modelling was used to study the behaviour of fly ash mixes deposited in extracted mine spaces. The models were constructed for two different geometries of underground extracted mine spaces: into cavities of the type of large slits created in the course of mining in steeply lode deposits without subsequently filling the empty space and in vertical shafts of rectangular or circular cross-section with horizontal side headings that have partly caved in due to mine shocks or other seismic events.     

复杂条件下三维地震勘探的技术措施--以张集煤矿深部采区为例

针对张集煤矿深部区域三维地震勘探区目的层埋藏深、倾角变化剧烈、7煤被岩浆岩严重侵蚀的特点,阐述了复杂条件下三维地震勘探的野外数据采集、资料处理与解释过程中所采用的主要技术措施及取得的地质效果.