Discrete element modelling of extensional,growth, fault‐propagation folds

Extensional fault‐propagation folds are now recognised as being an important part of basin structure and development. They have a very distinctive expression, often presenting an upward‐widening monocline, which is subsequently breached by an underlying, propagating fault. Growth strata, if present, are thought to provide a crucial insight into the manner in which such structures grow in space and time. However, interpreting their stratigraphic signal is neither straightforward nor unique. Both analogue and numerical models can provide some insight into fold growth. In particular, the trishear kinematic model has been widely adopted to explain many aspects of the evolution and geometry of such fault‐propagation folds. However, in some cases the materials/rheologies used to represent the cover do not reproduce the key geometric/stratigraphic features of such folds seen in nature. This appears to arise from such studies not addressing adequately the very heterogenous mechanical stratigraphy seen in many sedimentary covers. In particular, flexural slip between beds/layers is often not explicitly modelled but, paradoxically, it appears to be an important deformation mechanism operative in such settings. Here, I present a 2D discrete element model of extensional fault‐propagation folding which explicitly includes flexural slip between predefined sedimentary units or layers in the cover. The model also includes growth strata and shows how they may reflect the various evolutionary stages of fold and fault growth. When flexural slip is included in the modelling scheme, the resultant breached monoclines and their growth strata are strikingly similar to some of those seen in nature. Results are also compared with those obtained using simple, homogeneous, frictional‐cohesive and elastic cover materials. Both un‐lithified and lithified growth strata are considered and clearly show that, rather than just being passive recorders of structural evolution, growth strata can themselves have an important effect on fault‐related fold growth. Implications for the evolution of and strain within, the resultant growth structures are discussed. A final focus of this study is the relationship that trishear might have with the upward‐widening zone of flexural slip activation away from a fault tip singularity.     

Late syn‐rift evolution of the Vingleia Fault Complex,Halten Terrace,offshore Mid‐Norway; a test of rift basin tectono‐stratigraphic models

Rift basin tectono‐stratigraphic models indicate that normal fault growth controls the sedimentology and stratigraphic architecture of syn‐rift deposits. However, such models have rarely been tested by observations from natural examples and thus remain largely conceptual. In this study we integrate 3D seismic reflection, and biostratigraphically constrained core and wireline log data from the Vingleia Fault Complex, Halten Terrace, offshore Mid‐Norway to test rift basin tectono‐stratigraphic models. The geometry of the basin‐bounding fault and its hangingwall, and the syn‐rift stratal architecture, vary along strike. The fault is planar along a much of its length, bounding a half‐graben containing a faultward‐thickening syn‐rift wedge. Locally, however, the fault has a ramp‐flat‐ramp geometry, with the hangingwall defined by a fault‐parallel anticline‐syncline pair. Here, an unusual bipartite syn‐rift architecture is observed, comprising a lower faultward‐expanding and an upper faultward‐thinning wedge. Fine‐grained basinfloor deposits dominate the syn‐rift succession, although isolated coarse clastics occur. The spatial and temporal distribution of these coarse clastics is complex due to syn‐depositional movement on the Vingleia Fault Complex. High rates of accommodation generation in the fault hangingwall led to aggradational stacking of fan deltas that rapidly (<5 km) pinch out basinward into offshore mudstone. In the south of the basin, rapid strain localization meant that relay ramps were short‐lived and did not represent major, long‐lived sediment entry points. In contrast, in the north, strain localization occurred later in the rift event, thus progradational shorefaces developed and persisted for a relatively long time in relay ramps developed between unlinked fault segments. The footwall of the Vingleia Fault Complex was characterized by relatively low rates of accommodation generation, with relatively thin, progradational hangingwall shorelines developed downdip of the fault block apex, sometime after the onset of sediment supply to the hangingwall. We show that rift basin tectono‐stratigraphic models need modifying to take into account along‐strike variability in fault structure and basin physiography, and the timing and style of syn‐rift sediment dispersal and facies, in both hangingwall and footwall locations.     

Stratigraphic response to spatiotemporally varying tectonic forcing in rifted continental basin: Insight from a coupled tectonic‐stratigraphic numerical model

The role of spatiotemporally varying tectonic forcing in the development of stratigraphic patterns along passive margins and continental rift basins has been recognized for decades, but the exact nature of the stratigraphic response is still debated. This study develops a coupled tectonic‐stratigraphic numerical model with a fixed absolute lake level and constant climate conditions to quantify the signatures of spatiotemporally varying tectonic forcing on the stratigraphic record. This model consists of a three‐dimensional rift basin with a range of geomorphic features and produces a number of well‐recognized stratigraphic patterns, which are commonly interpreted to be caused by lake‐/sea‐level or climate fluctuations. This study demonstrates that the shoreline and grain‐size front are decoupled through the adjustment of the depositional slope and sediment dispersal under spatiotemporally varying tectonic forcing, especially in underfilled basins. Under such a decoupled situation, the pathway of the migrating subsidence centre correlates with the pathway of the grain‐size front, a result of competition between spatiotemporally varying tectonic forcing and autogenic sediment transport. The model results also highlight the significance of three‐dimensional variability in the stratigraphic response to tectonic forcing, which may be overlooked or misinterpreted and suggests a high degree of uncertainty in re‐establishing the base‐level cycles from the stratigraphic record alone. Moreover, spectral analysis of the modelled stratigraphy and tectonic forcing suggests that low‐frequency tectonic signals are more likely to be recorded in the stratigraphy with a lag time, whereas high‐frequency tectonic signals are likely to be shredded, mixed with autogenic signals, or buffered through sediment‐routing systems. Finally, quantitative measurements of the stratigraphic architecture of the Nanpu sag in the Bohai Bay Basin, China are used to tune the numerical model of this study to illustrate how to evaluate the role of tectonic forcing on the development of characteristic stratigraphic sequences.     

Calculating rates of syndepositional normal faulting in the western margin of the Mesozoic Subalpine Basin (south-east France)

A method is developed to quantify the rate of fault movement, with a very fine time-resolution, so that relevant histories of fault movements can be obtained. The study subject is a Triassic–Jurassic syndepositional normal fault located at the margin of an intracratonic deep basin, the Subalpine basin of south-eastern France. The fault has recently been identified and specifically investigated by a seismic survey along with drilling (Géologie profonde de la France Program). The investigation is based on correlation of time-lines on both sides of the structure through a period of about 70 Myr. Correlations have been made using variable approaches depending on the stratigraphic interval: recognition of laterally continuous marker-beds, biostratigraphic information and application of genetic stratigraphy concepts. In the case of biostratigraphic data, absolute ages are assigned to selected lines of correlation to determine time lengths and calculate velocities of fault movements. A specific backstripping procedure is established. The differential subsidence history between the two sites is restored not as a simple subtraction made after conventional backstripping on each site but as the sum of discrete differential subsidence increments calculated for each chronostratigraphic interval. The originality of the work lies in the completion of the supporting data base, implementation of high-resolution correlations within the large time-span of the investigation and development of a method to calculate the differential subsidence. Even though unassessable errors and uncertainties are still associated with the stratigraphic correlations, the backstripping procedure and the chronological control, the overall method offers a certain validity because the calculated and the observed differential subsidences are close. Beyond the obvious control on depositional geometries and localization of some reservoirs at the toe of the fault, the kinetic regime of the normal fault played an indirect but crucial part in the differential burial-related alteration of the reservoirs recorded on both sides of the fault. The high accuracy of the calculation has revealed that: (1) the growth pattern of the fault does not result from a continuous thermomechanical process but is composed of a series of rifting and sliding events related to gravity-driven extension; (2) the spectacular differential stratigraphic record on both sides of the fault is associated with fairly low values of the fault growth rate (maximum of 165 m Myr^?1). The method for measuring the growth of structures can be applied to any tectonic and sedimentary environment and offers a wide range of applications.     

Axial and transverse deep-water sediment supply to syn-rift fault terraces: Insights from the West Xylokastro Fault Block,Gulf of Corinth,Greece

Deep-water syn-rift systems develop in partially- or transiently-linked depocentres to form complicated depositional architectures, which are characterised by short transport distances, coarse grain sizes and a wide range of sedimentary processes. Exhumed systems that can help to constrain the tectono-stratigraphic evolution of such systems are rare or complicated by inversion tectonics. Here, we document a mid-Pleistocene deep-water syn-rift system fed by Gilbert-type fan deltas in the hangingwall of a rift margin fault bounding the West Xylokastro Horst block, on the southern margin of the Gulf of Corinth, Greece. Structural and stratigraphic mapping combined with digital outcrop models permit observations along this syn-rift depositional system from hinterland source to deep-water sink. The West Xylokastro Fault hangingwall is filled by two distinct sediment systems; an axial system fed by coarse-grained sediment gravity flows derived from fault-tip Gilbert-type fan deltas and a lateral system dominated by mass transport deposits fed from an evolving fault-scarp apron. Abrupt changes in stratigraphic architecture across the axial system are interpreted to record changes in relative base level, sediment supply and tectonics. Locally, depositional topography and intra-basinal structures controlled sediment dispersal patterns, from bed-scale infilling of local rugose topography above mass transport complexes, to basin-scale confinement from the fault scarp apron. These acted to generate a temporally and spatially variable, heterogeneous stratigraphic architecture throughout the basin-fill. The transition of the locus of sedimentation from a rift margin to a fault terrace through the syn-sedimentary growth of a basinward fault produced regressive surfaces updip, which manifest themselves as channels in the deep-water realm and acted to prograde the system. We present a new conceptual model that recognises coeval axial and transverse systems based on the stratigraphic architecture around the West Xylokastro fault block that emphasizes the lateral and vertical heterogeneity of rift basin-fills with multiple entry points.     

Tectonic modelling of the Middle Jurassic synrift stratigraphy in the Oseberg–Brage area, northern Viking Graben

A finite difference model, allowing for episodic movements along different faults, is used to examine the effect of tectonics on the stratigraphic signature in the Oseberg–Brage area in the northern Viking Graben. Constraints are provided by local exploration and production well data and 3-D seismic coverage, and a regional depth-converted seismic line.
In the modelling, we focus on the influence of varying rates of fault movement on stratigraphic signatures such as upflank unconformities and changes in layer thickness. We couple the basinwide features of the northern Viking Graben with the fault-block-scale features of the Oseberg–Brage area by using parameter constraints derived by large-scale modelling as input for the local-scale model. In addition, subsidence patterns resulting from the basinwide model were used as background subsidence for the fault block model of the Oseberg–Brage area.
The model results indicate that the alternating activation of different faults with varying extension rates can cause stratigraphic features such as unconformities, condensation and onlap/offlap patterns. Onlap occurs during periods of low extension rates. An increase in extension rate along a fault causes footwall uplift, resulting in condensation or upflank erosion yielding unconformities. This influence can also affect sub-basins further away from the fault. Downdip layer thickening reflects the local tilting of fault blocks.
The coupling of the local and regional scales turns out to be essential in explaining the stratigraphy of the Oseberg–Brage area: basinward and, notably, updip layer thickening as observed on some of the fault blocks can only be explained by activity of the boundary fault on the opposing, western margin of the northern Viking Graben.
     

Stratigraphic expression of the lateral propagation and growth of isolated fault-related uplifts

The lateral propagation of faults and folds is known to be an important process during the development of mountain belts, but little is known about the manner in which along‐strike fault–fold growth is expressed in pre‐ and syntectonic (growth) strata. We use a coupled tectonic and stratigraphic model to investigate the along‐strike stratigraphic expression of fault‐related folds/uplifts that grow in both the transport and strike directions. We consider faults that propagate following a quadratic (nonself‐similar evolution) or linear (self‐similar evolution) scaling law, using different slip distributions per episode of fault propagation, under general background sedimentation. We find that the long‐strike geometry of pre‐ and syntectonic strata and the geometry of growth axial surfaces reflect the mode of fault propagation. The geometry of strata observed in the model is similar to that observed in natural contractional structures when: (1) the evolution of the fault is nonself‐similar, or (2) the fault grows as a result of thrust faulting events with similar displacements along strike that are terminated abruptly at the fault tips.     

Architecture and evolution of syn-rift clastic depositional systems towards the tip of a major fault segment, Suez Rift, Egypt

ABSTRACT This paper investigates syn‐rift stratigraphic architecture and facies relationships along a 7 km long strike section towards the tip of a major, basin‐bounding normal fault segment (Thal Fault) in the Suez Rift, Egypt. In this location, the fault is composed of two precursor fault strands, Gushea and Abu Ideimat, linked by a jog or transfer fault. We document a Miocene syn‐rift succession, deposited more than c. 5.5 Myr after rift initiation, that is composed of a range of carbonate‐clastic facies associated with coarse‐grained deltaic, shoreface and offshore depositional systems. Key regionally correlatable stratal surfaces within this succession define time equivalent stratal units that exhibit variability in thickness and architecture, related to the interplay of both regional and local controls, in particular, the evolution of two, small‐scale (<6 km long) precursor fault strands (Gushea and Abu Ideimat). Integration of structural and stratigraphic data indicates that the boundary (relay ramp) between these two fault strands was a relative high during much of the rift event, with hard‐linkage and considerable displacement accumulation not occurring until at least c. 7.5 Myr after rift initiation. This is because: (i) the preserved stratigraphy is thinner in the hanging wall of the strand boundary; (ii) a eustatic sea‐level fall with an amplitude of 100 m generated more than 25 m of incision at the strand boundary, a region that has a final fault displacement of c. 600 m; and (iii) the fault strand boundary persisted as a footwall low and transport pathway for coarse‐grained deltas entering the basin. This study indicates that variability in stratal thickness and stratigraphic architecture towards the tip of the Thal Fault was related to the linkage history of two small‐scale (c. 6 km long) precursor fault segments. We suggest that similar, small‐scale stratal variability may occur repeatedly along the entire length of major basin‐bounding fault segments due to the process of fault growth by the linkage of smaller scale precursor strands.     

渭南黄土台塬晚新生代环境与城市建设

根据对W7、W8两钻孔中的孢粉、微体古生物化石和矿物成分分析,结合野外考察及古地磁地层年代资料与标准剖面对比,作者提出本区第四纪地层划分的初步意见并阐述了晚新生代环境.根据W7、W8两孔相当层位的深度变化,推断张性正断层的存在,进而讨论了与城市建设有关的地下水资源和黄土塌陷问题.     

Density-induced settling of tephra through organic lakesediments

Tephras are often used in paleolimnology and other stratigraphicapplications as a chronostratigraphic marker. Where analytical errors inradiocarbon or other dating methods make precise comparison between sitesdifficult, tephras provide an absolute stratigraphic reference that can be usedto assess the relative ages of events across a region. Applications oftephrochronology typically make the assumption that a tephra is deposited atwhat was the top of the stratigraphic sequence at the time of deposition, andthat the contact between the tephra and underlying sediments is anisochron. This paper presents evidence from two lakes in western Canadawhich suggest that tephras may be very mobile within the sedimentary column,particularly in low-density organic lake sediments. Analysis of sedimentcores from Copper Lake, Alberta, suggest that the 6730 BP Mazama tephra moveddown-core by the equivalent of more than 3000 years. A vertical exposureof the Holocene sediments from Doal Lake, Yukon Territory, reveals that the1200 BP White River (WR) tephra, found throughout the southern Yukon, moveddown-sequence through organic lake sediments, to a stratum dating toapproximately 10,000 BP, creating conformable tephra beds at that level. Thistype of stratigraphic displacement has important consequences for the use oftephrochronology in lakes and other soft-sediment environments andunderscores the importance of properly identifying tephras and criticallyassessing their stratigraphic context within a lake core.     

Normal fault development in a sedimentary succession with multiple detachment levels: the Lower Cretaceous Oliete sub-basin, Eastern Spain

Field exposures of Lower Cretaceous strata in the Oliete sub-basin (eastern Spain) allow identification of syn-rift features such as listric and planar normal faults, rotated fault blocks, fault-related folds, sharp thickness variations and wedge-shaped sedimentary geometries, as well as intra-rift angular unconformities defined by the erosive truncation of rotated fault blocks and the onlap of upper units. The combined use of both stratigraphic and extensional tectonic features at the outcrop scale has allowed us to characterise different syn-sedimentary tectonic events and their correlation between the footwall and the hangingwall block of the major extensional Gargallo fault. Such events have been interpreted as induced by the major Gargallo fault activity, and they are the basis for proposing a polyphase evolutionary model for this master fault. Data indicate that the deformation tends not to be concentrated on the major fault; instead, it is distributed over a wide area. We interpret that both the interlayered detachment levels in the pre-rift (especially the Late Triassic Keuper Facies) and syn-rift series, together with the rheology of the sedimentary pile, play an important role in transmitting deformation from master faults to hangingwall and footwall blocks.     

Normal fault growth and early syn-rift sedimentology and sequence stratigraphy: Thal Fault, Suez Rift, Egypt

This paper investigates the tectono‐stratigraphic development of a major, segmented rift border fault (Thal Fault) during ca. 6 Myr of initial rifting in the Suez Rift, Egypt. The Thal Fault is interpreted to have evolved by the progressive linkage of at least four fault segments. We focus on two contrasting structural settings in its hangingwall: Gushea, towards the northern tip of the fault, and Musaba Salaama, ca. 20 km along‐strike to the south, towards the centre of the fault. The early syn‐rift stratigraphic succession passes upwards from continental facies, through a condensed marginal marine shell‐rich facies, into fully marine shoreface sandstone and offshore mudstone. Regionally correlatable stratal surfaces within this succession define time‐equivalent stratal units that exhibit considerable along‐strike variability in thickness and facies architecture. During the initial ca. 6 Myr of rifting, the thickest stratigraphy developed towards the centre of the array of fault segments that subsequently hard linked to form the Thal Fault. Thus, a displacement gradient existed between fault segments at the centre and tip of the fault array, suggesting that the fault segments interacted, and a fixed length was established for the fault array, at an early stage in rifting. Towards the centre of the Thal Fault the early syn‐rift succession shows pronounced thickening away from the fault and towards a series of intra‐block antithetic faults that were active for up to ca. 6 Myr. This indicates that a large proportion of fault‐controlled subsidence during the initial ca. 6 Myr of rifting occurred in the hangingwalls of antithetic intra‐block faults, and not the present‐day Thal Fault. The antithetic faults progressively switched off during rifting such that after ca. 6 Myr of rifting, fault‐activity had localised on the Thal Fault enabling it to accrue to the present‐day high level of displacement. Aspects of the development of the Thal Fault appear to be in contrast to many models of fault evolution that predict large‐displacement rift‐climax faults to have always had the greatest displacement during fault population evolution. This study has implications for tectono‐stratigraphic development during early rift basin evolution. In particular, we stress that caution must be taken when relating final rift‐climax fault structure to the early tectono‐stratigraphy, as these may differ considerably.     

Tectonic and climatic control on the Late Messinian sedimentary evolution of the Nijar Basin (Betic Cordillera,Southern Spain)

The Late Messinian fill of the Nijar Basin (Betic Cordillera, southeastern Spain) mainly consists of clastic deposits of the Feos Formation that at basin margins rest unconformably above the primary evaporites of the Yesares Formation, the local equivalent of the Mediterranean Lower Gypsum. The Feos Fm. records the upward transition towards non‐marine environments before the abrupt return to fully marine conditions at the base of the Pliocene. The Feos Fm. is clearly two‐phase, with ‘lower’ and ‘upper’ members, which exhibit substantial differences in terms of facies, thickness, depositional trends and cyclical organization. These members record two distinct sedimentary and tectonic stages of Nijar Basin infilling. A high‐resolution, physical‐stratigraphic framework is proposed based on key beds and stratigraphic cyclicity and patterns that differ largely from those of most previously published studies. The predominant influence on stratigraphic cyclicity is interpreted to be precessionally driven climate changes, allowing their correlation to the Late Messinian astronomically calibrated chronostratigraphic framework. Detailed correlations suggest a phase of enhanced tectonic activity, possibly related to the Serrata‐Carboneras strike‐slip fault zone, during the first stage (‘lower’ member), resulting in a strongly articulated topography with structural lows and highs controlling sediment thickness and facies variation. Tectonic activity decreased during the second stage (‘upper’ member), which is characterized by (1) a progressively dampened and homogenized, (2) overall relative base‐level rise and (3) gradual establishment of hypohaline environments. Facies characteristics, overall stacking patterns and depositional trends of the Feos Fm. are analogous with uppermost Messinian successions of the Northern Apennines, Piedmont Basin and Calabria. Despite minor differences related to the local geodynamic setting, these basins experienced a common Late Messinian history that supports the development of a single, large Mediterranean water body characterized by high‐frequency, climatically‐driven changes in sediment flux and base‐level.     

Salt tectonics in an intracontinental transform setting: Cumberland and Sackville basins,southern New Brunswick,Canada

Salt tectonics have markedly influenced the rapid evolution of the Upper Palaeozoic Cumberland Basin of Atlantic Canada, including the ca. 5 km‐thick Mississippian – Pennsylvanian stratigraphic succession exposed along the UNESCO World Heritage coastline at Joggins, Nova Scotia. A diapiric salt wall is exposed in the Minudie Anticline to the north of the Joggins section on the Maringouin Peninsula of New Brunswick, which corresponds to the fault‐bounded northern margin of the Cumberland Basin. The salt wall is of Visean evaporites of the Windsor Gp that originally were buried by red‐beds of the Mabou Gp in the Serpukhovian, and later by fluvial and floodplain strata (Boss Point Fm, Cumberland Gp) in the Yeadonian (mid‐Bashkirian, Early Pennsylvanian). Folds and faults in the Boss Point and overlying basal Little River formations are truncated by an angular unconformity at the base of overlying red‐beds of the Grande Anse Fm. Re‐evaluation of the palynological data delimits the Grande Anse Fm as Langsettian, providing a tight constraint of less than 2 myr on the timing of deformation. Diversion of palaeoflows by the rising salt structure, noted in previous work on the upper Boss Point Fm, occurs to the north of the diapiric anticline. This is interpreted to signify the development of a mini‐basin on commencement of diapirism once a ~1.5 km‐thick succession of clastic strata had buried the salt. Faults and folds in the succession below the unconformity indicate an initial phase of dextral transpressive strike‐slip motion, which may have promoted halokinesis. Reverse faults indicate shortening associated with northward development and overturn of the Minudie Anticline during transpression; subsequent normal faulting was associated with collapse of the sediment pile and underlying salt structure.     

Role of fault interactions in controlling synrift sediment dispersal patterns: Miocene, Abu Alaqa Group, Suez Rift, Sinai, Egypt

Although fault growth is an important control on drainage development in modern rifts, such links are difficult to establish in ancient basins. To understand how the growth and interaction of normal fault segments controls stratigraphic patterns, we investigate the response of a coarse-grained delta system to evolution of a fault array in a Miocene half-graben basin, Suez rift. The early Miocene Alaqa delta complex comprises a vertically stacked set of footwall-sourced Gilbert deltas located in the immediate hangingwall of the rift border fault, adjacent to a major intrabasinal relay zone. Sedimentological and stratigraphic studies, in combination with structural analysis of the basin-bounding fault system, permit reconstruction of the architecture, dispersal patterns and evolution of proximal Gilbert delta systems in relation to the growth and interaction of normal fault segments. Structural geometries demonstrate that fault-related folds developed along the basin margin above upward and laterally propagating normal faults during the early stages of extension. Palaeocurrent data indicate that the delta complex formed a point-sourced depositional system developed at the intersection of two normal fault segments. Gilbert deltas prograded transverse into the basin and laterally parallel to faults. Development of the transverse delta complex is proposed to be a function of its location adjacent to an evolving zone of fault overlap, together with focusing of dispersal between adjacent fault segments growing towards each other. Growth strata onlap and converge onto the monoclinal fold limbs indicating that these structures formed evolving structural topography. During fold growth, Gilbert deltas prograded across the deforming fold surface, became progressively rotated and incorporated into fold limbs. Spatial variability of facies architecture is linked to along-strike variation in the style of fault/fold growth, and in particular variation in rates of crestal uplift and fold limb rotation. Our results clearly show that the growth and linkage of fault segments during fault array evolution has a fundamental control on patterns of sediment dispersal in rift basins.     

MASS WASTING IN THE SWAUK WATERSHED,WASHINGTON

Mass wasting evidence is common along the margins of the Columbia River Basalts. I identified, mapped, dated, and assessed the environment of nearly 160 discrete slope failures (excluding rockfall) along the margins of the Columbia River Basalts in the Swauk watershed of central Washington. Rotational slides, translational slides, flows, and complex slide-flows were identified via topographic map, airphoto, and field analysis. Geographic information systems analysis revealed that these features cover 38% of the watershed. Translational slides are the most numerous of the slope failures, whereas complex slide-flows cover the most area. I placed each slope failure into a relative age category (active, inactive-young, inactive mature, and inactive-old) based on the characteristics of the main scarp, lateral flanks, internal morphology, vegetation cover, and toe relationships. Most Swauk watershed slope failures are inactive-mature. Organic sediments from an inactive-mature sag pond formed ～6880 ¹⁴C yr BP, whereas inactive-young sediments dated at ～5930 ¹⁴C yr BP. Inactive slope failures are often associated with steep slopes, inclined beds, incompetent geologic units, or streamcuts. Streamcuts, roadcuts, or clearcuts typically accompany active slope failures. Rain-on-snow events and associated mass wasting in winter 1996 provide a plausible trigger analog for inactive mass wasting. Rockfall deposits cover ～29% of the watershed, range from inactive to active in age, and occur atop pre-existing slope failures in well-jointed Columbia River Basalts. Mass wasting has played a key role in shaping the topographic and hydrologic patterns of the watershed. [Key words: mass wasting, watershed, Washington state, Columbia River Basalts, rain-onsnow.]     

Stratigraphic and structural expression of the lateral growth of thrust fault-propagation folds: results and implications from kinematic modelling

In order to better understand the development of thrust fault‐related folds, a 3D forward numerical model has been developed to investigate the effects that lateral slip distribution and propagation rate have on the fold geometry of pre‐ and syn‐tectonic strata. We consider a fault‐propagation fold in which the fault propagates upwards from a basal decollement and along‐strike normal to transport direction. Over a 1 Ma runtime, the fault reaches a maximum length of 10 km and accumulates a maximum displacement of 1 km. Deformation ahead of the propagating fault tip is modelled using trishear kinematics while backlimb deformation is modelled using kink‐band migration. The applicability of two different lateral slip distributions, namely linear‐taper and block‐taper, are firstly tested using a constant lateral propagation rate. A block‐taper slip distribution replicates the geometry of natural fold‐thrusts better and is then used to test the sensitivity of thrust‐fold morphology to varied propagation rates in a set of fault‐propagation folds that have identical final displacement to length (D_max/L_max) ratios. Two stratigraphic settings are considered: a model in which background sedimentation rates are high and no topography develops, and a model in which a topographic high develops above the growing fold and local erosion, transport and deposition occur. If the lateral propagation rate is rapid (or geologically instantaneous), the fault tips quickly become pinned as the fault reaches its maximum lateral extent (10 km), after which displacement accumulates. In both stratigraphic settings, this leads to strike‐parallel rotation of the syn‐tectonic strata near the fault tips; high sedimentation rates relative to rates of uplift result in along‐strike thinning over the structural high, while low sedimentation rates result in pinchout against it. In contrast, slower lateral propagation rates (i.e. up to one order of magnitude greater than slip rate) lead to the development of along‐strike growth triangles when sedimentation rates are high, whereas when sedimentation rates are low, offflap geometries result. Overall we find that the most rapid lateral propagation rates produce the most realistic geometries. In both settings, time‐equivalent units display both nongrowth and growth stratal geometries along‐strike and the transition from growth to nongrowth has the potential to delineate the time of fault/fold growth at a given location. This work highlights the importance of lateral fault‐propagation and fault tip pinning on fault and fold growth in three dimensions and the complex syn‐tectonic geometries that can result.     

Syn‐kinematic sedimentation at a releasing splay in the northern Minwun Ranges,Sagaing Fault zone,Myanmar: significance for fault timing and displacement

The Sagaing Fault zone is the largest active fault in SE Asia, whose current displacement rate of around 1.8 cm year^?1 is well‐established from GPS data. Yet determining the timing of initiation and total displacement on the fault zone has proven controversial. The timing problem can potentially be resolved through a newly identified syn‐kinematic sedimentary section directly related to displacement on the Sagaing Fault in the northern Minwun Ranges. The northern part of the western strand of the Sagaing Fault has a releasing splay geometry that sets up a syn‐kinematic oblique‐extensional basin in its hangingwall, here called the North Minwun Basin. A series of thick ridges probably composed of alluvial fan and fluvial sandstones dipping between 20 and 70° to the north, and younging northwards comprise the basin fill over a distance of 40 km. Total stratigraphic thickness (not vertical thickness) is estimated at 25 km. The basin in terms of depositional geometries, large displacements, and large stratigraphic thickness and appearance on satellite images has parallels with the extensional Hornelen basin, Norway and the strike‐slip Ridge Basin, California. Minimum likely displacement on the fault strand is 40 km, and may possibly be in excess of 100 km. The remote and inaccessible basin has yet to be properly dated, likely ages range between Eocene and Miocene. When dated the basin will provide an important constraint on the timing of deformation. The potential for this basin to constrain the timing and displacement along the northern part of the Sagaing Fault has not been previously recognised.     

Basin architecture and thermal maturation in the strike-slip Deer Lake Basin, Carboniferous of Newfoundland

Abstract The Deer Lake Basin is an entirely non-marine basin associated with the Cabot fault zone. Structural and stratigraphic evidence strongly suggest dextral strike-slip movements along the fault zone during Tournaisian-Visean time. Two elongated, end-on structural blocks (probable positive flower structures) contain fold axes and second-order faults oriented obliquely to fault traces bounding the blocks, in a manner implying dextral movements. In one part of the basin, the stratigraphic thickness of a long homoclinal section of later basin-fill sediment (Deer Lake Group) greatly exceeds the suggested depth to basement based on gravity measurements, a situation common to strike-slip basins. Formations representing basin fill can be arranged into megasequences (from oldest to youngest: Anguille Group, Wetstone Point and Wigwam Brook Formations, Deer Lake Group, Howley Formation) corresponding to lateral growth stages of the basin. Gravity, magnetic, and seismic data show that depths to basement on either side of the end-on flower structures are comparable, so that the youngest strata in the basin (Howley Formation) are not underlain by earlier basin fill. These geophysical data, therefore, corroborate the geological conclusion of onlapping stratigraphic relations. The geophysical data suggest participation of basement in Carboniferous gravity faulting and show the location of the subsurface extension of the Taylors Brook Fault in the western part of the Deer Lake Basin. Thermal maturation of the Anguille and Deer Lake Groups, as measured by vitrinite reflectance, clay mineral assemblages, illite crystallinity, and Rock-Eval pyrolysis, indicate a much higher level of maturation for the Anguille than for the Deer Lake Group. Palaeotemperatures for the Anguille and Deer Lake Groups are estimated to be around 200 and 100^oC, respectively, suggesting that Anguille Group rocks are overmature whereas Deer Lake Group strata are within the oil-generating window. Onlapping stratigraphic relations and areally homogeneous time/temperature effects, however, have created a situation in which the Deer Lake Group and Howley Formation have similar maturation levels.     

Seismic geomorphology and origin of diagenetic geobodies in the Upper Cretaceous Chalk of the North Sea Basin (Danish Central Graben)

Kilometre‐scale geobodies of diagenetic origin have been documented for the first time in a high‐resolution 3D seismic survey of the Upper Cretaceous chalks of the Danish Central Graben, North Sea Basin. Based on detailed geochemical, petrographic and petrophysical analyses, it is demonstrated that the geobodies are of an open‐system diagenetic origin caused by ascending basin fluids guided by faults and stratigraphic heterogeneities. Increased amounts of porosity‐occluding cementation, contact cement and/or high‐density/high‐velocity minerals caused an impedance contrast that can be mapped in seismic data, and represent a hitherto unrecognized, third type of heterogeneity in the chalk deposits in addition to the well‐known sedimentological and structural features. The distribution of the diagenetic geobodies is controlled by porosity/permeability contrasts of stratigraphic origin, such as hardgrounds associated with formation tops, and the feeder fault systems. One of these, the Top Campanian Unconformity at the top of the Gorm Formation, is particularly effective and created a basin‐wide barrier separating low‐porosity chalk below from high‐porosity chalk above (a Regional Porosity Marker, RPM). It is in particular in this upper high‐porosity unit (Tor and Ekofisk Formations) that the diagenetic geobodies occur, delineated by “Stratigraphy Cross‐cutting Reflectors” (SCRs) of which eight different types have been distinguished. The geobodies have been interpreted as the result of: (i) escaping pore fluids due to top seal failure, followed by local mechanical compaction of high‐porous chalks, paired with (ii) ascension of basinal diagenetic fluids along fault systems that locally triggered cementation of calcite and dolomite within the chalk, causing increased contact cements and/or reducing porosity. The migration pathway of the fluids is marked by the SCRs, which are the outlines of high‐density bodies of chalk nested in highly porous chalks. This study, thus, provides new insights into the 3D relationship between fault systems, fluid migration and diagenesis in chalks and has important applications for basin modelling and reservoir characterization.