Experimental and numerical studies on the development of a new wave absorber

This paper proposes a new wave absorber made of flexible net structures. To test the efficiency of the proposed water absorber, experiments were done on wave absorbers of various lengths of and the thicknesses of the wave absorber. To perform a numerical modeling of the proposed wave absorber, damping terms were introduced in linearized free-surface boundary conditions. The length and the thickness of the wave absorber were modeled by the length and the coefficient of the damping zones. The boundary element method was adopted to solve the system. Series of experiments were performed to obtain the data for the coefficients of the damping term needed in numerical calculations. The predicted wave heights agreed very closely with those of experiments when the lengths of the incoming waves were within the order of the length of the wave absorber.     

Hydrodynamic characteristics of floating toroidal bodies

The paper deals with the linearized exciting wave forces and hydrodynamic coefficients of a toroidal body floating in water of finite depth. For the solution of the diffraction and the radiation problems the flow field around the body is subdivided into ring-shaped fluid regions, in each of which axisymmetric eigenfunction expansions for the velocity potential is made. By implementing Galerkin's method the various potential solutions are matched and numerical results concerning the exciting wave forces and the hydrodynamic coefficients in all modes of motion are obtained.     

Single Mode Simulation Calculation of Oscillating Buoy Wave Energy Converter with A Slider

This paper presents an oscillating slider wave energy device which is based on a seabed anchoring and uses eagle beak as the absorber. The self-compiled program uses the boundary element theory based on the simple Green's function to solve the wave forces and hydrodynamic parameters. And the equation of motion, the oscillation of the float and the capture width ratio are obtained by the modal method. The influences of the shape of the eagle beak, the angle of the slider and the wave heading on the capture ability of the device are investigated. According to the calculation results and the wave resources in the sea area, the optimal shape of the eagle beak and external damping can be selected to maximize the wave energy capture capability.     

Interaction of linear waves with an array of infinitely long horizontal circular cylinders in a two-layer fluid of infinite depth

The linear water wave scattering and radiation by an array of infinitely long horizontal circular cylinders in a two-layer fluid of infinite depth is investigated by use of the multipole expansion method. The diffracted and radiated potentials are expressed as a linear combination of infinite multipoles placed at the centre of each cylinder with unknown coefficients to be determined by the cylinder boundary conditions. Analytical expressions for wave forces, hydrodynamic coefficients, reflection and transmission coefficients and energies are derived. Comparisons are made between the present analytical results and those obtained by the boundary element method, and some examples are presented to illustrate the hydrodynamic behavior of multiple horizontal circular cylinders in a two-layer fluid. It is found that for two submerged circular cylinders the influence of the fluid density ratio on internal-mode wave forces is more appreciable than surface-mode wave forces, and the periodic oscillations of hydrodynamic results occur with the increase of the distance between two cylinders; for four submerged circular cylinders the influence of adding two cylinders on the wave forces of the former cylinders is small in low and high wave frequencies, but the influence is appreciable in intermediate wave frequencies.     

On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.     

Modelling of a wave energy converter array with a nonlinear power take-off system in the frequency domain

This paper presents a nonlinear frequency domain model and uses this to assess the performance of a wave energy converter (WEC) array with a nonlinear power take-off (PTO). In this model, the nonlinear PTO forces are approximated by a truncated Fourier series, while the dynamics of the WEC array are described by a set of linear motion equations in the frequency domain, and the hydrodynamic coefficients are obtained with the boundary element method. A single heave absorber is firstly investigated to establish the accuracy of the new model in capturing the nonlinear behaviour of the pumping system. Subsequently, simulations of a 2D array with 18 WECs and a pillar in the centre (representing the tower of a wind turbine) are carried out to understand wave interference effects. Several optimisation strategies are proposed to improve the overall performance of the WEC array. These results demonstrate a computationally effective method for accounting for nonlinear effects in large WEC arrays. The proposed approach may potentially be applied for developing control algorithms for the adaptability of a 2D array to incoming wave excitation.     

Radiation and diffraction of linear water waves by an infinitely long submerged rectangular structure parallel to a vertical wall

The radiation and the diffraction of linear water waves by an infinitely long floating rectangular structure submerged in water of finite depth with leeward boundary being a vertical wall are analyzed in this paper by using the method of separation of variables. Analytical expressions for the radiated and diffracted potentials are derived as infinite series with unknown coefficients determined by the eigenfunction expansion matching method. The expressions for wave forces and hydrodynamic coefficients are given. A comparison is made between the results obtained by the present analytical solution and those obtained by the boundary element method. By using the present analytical solution, the hydrodynamic influences of the submergence, the width, the thickness of the structure, and the distance between the structure and the wall on the wave forces and hydrodynamic coefficients are discussed in detail.     

Third-order theory for determining the hydrodynamic forces on axisymmetric floating or submerged bodies in oscillatory heaving motion

An investigation of the hydrodynamic behaviour of bodies in a large-amplitude oscillatory motion, for example in view of wave power absorption by floating bodies, not only requires the knowledge of added mass and damping coefficients, which can be calculated by means of a linear theory, but also of higher-order forces. Especially the third-order values will have to be calculated, because they contain a first-harmonic component.A computation procedure has been developed in order to calculate hydrodynamic forces up to the third order, acting on axisymmetric bodies in an oscillatory heaving motion. The method only requires the knowledge of first- and second-order potential functions, even for the calculation of third-order forces.Experiments have been carried out on floating conical and submerged cylindrical models, in order to evaluate the theoretical procedure.     

Nonlinear hydroelastic analysis of a moored floating body

By integration of the second-order fluid pressure over the instantaneous wetted surface, the generalized first- and second-order fluid forces used in nonlinear hydroelastic analysis are obtained. The expressions for coefficients of the generalized first- and second-order hydrodynamic forces in irregular waves are also given. The coefficients of the restoring forces of a mooring system acting on a flexible floating body are presented. The linear and nonlinear three-dimensional hydroelastic equations of motion of a moored floating body in frequency domain are established. These equations include the second-order forces, induced by the rigid body rotations of large amplitudes in high waves, the variation of the instantaneous wetted surface and the coupling of the first order wave potentials. The first-order and second-order principal coordinates of the hydrelastic vibration of a moored floating body are calculated. The frequency characteristics of the principal coordinates are discussed. The numerical results indicate that the rigid resonance and the coupling resonance of a moored floating body can occur in low frequency domain while the flexible resonance can occur in high frequency domain. The hydroelastic responses of a moored box-type barge are also given in this paper. The effects of the second-order forces on the modes are investigated in detail.     

Hydrodynamic Coefficients and Wave Excitation Forces for A Ship near A Quay

In this paper,the effects of a quay or a solid jetty on hydrodynamic coefficients and vertical wave excitation forces on a ship woth or without forward speed are discussed.A modified simple Green function technique is used to calculate the 2D coefficients while the strip theory is used to calculate the 3D coefficients. Wave excitation forces are also calculated with the strip theory. Numerical results are provided for hydrodynamic coefficients and vertical wave excitation forces on a 200000 DWT tanker ship. It is found that the quay has a considerable effect on the hydrodynamic coefficients and wave excitation forces for a ship.     

Hydrodynamic analysis of three–unit arrays of floating annular oscillating–water–column wave energy converters

This paper deals with the hydrodynamic analysis of an array of Oscillating Water Column (OWC) devices, made up of coaxial cylinders, which are floating either independently or as a unit forming a floating platform. The platform is considered either free – floating or as TLP configuration connected to the sea bottom. Numerical results concerning the three boundary value problems, namely, the diffraction, the motion – and the pressure – dependent radiation ones are given. They have been obtained through an analytical solution method using matched axisymmetric eigenfunction expansion formulations. In all cases the interaction phenomena with neighbouring bodies have been taken properly into account using the physical idea of multiple scattering. Numerical results for the first – and the mean second – order wave forces, the hydrodynamic interaction coefficients along with pressure hydrodynamic parameters, inner air pressure and free–surface oscillation amplitude inside and outside of each device are parametrically evaluated and supplemented by experimental data.     

Limiting heave response of a wave energy device by draft adjustment with upper surface immersion

Many studies have been published concerning the influence of the immersed shape (in still water) of a floating body on its response and power capture from ocean waves. With a few notable exceptions, much of this analysis has assumed small amplitude motion and linear models have been employed to predict response. The form of the upper surface of such a body has received little attention. Here, we show how the shape of the upper (top) surface of a floating body can be designed to ensure that the response amplitude of the body is within a specified value. This is of considerable importance to the survivability of wave energy devices. The approach used is to achieve a large increase of both natural period and hydrodynamic damping for only a small change of float mass. These two factors impose a hydrodynamic limit on the displacement which may be exploited to avoid the ‘end-stop’ problem often encountered in wave device design. To demonstrate the change of response, experimental measurements are presented of the response of an axisymmetric float with rounded base and conical upper surface with rounded perimeter due to a range of regular, irregular and focused wave conditions. Power extraction is not considered since the mechanically undamped response represents the worst case. In contrast to a simple, straight-sided axisymmetric float, a smaller change of mass is required to satisfy a particular response amplitude limit. Although a significant reduction is not expected, hydrodynamic damping may reduce with increasing physical scale, and this remains to be quantified.     

Comparison of methods for computing hydrodynamic characteristics of arrays of wave power devices

A comparison of methods for the calculation of the hydrodynamic characteristics of arrays of wave power devices is presented. In particular, the plane-wave approximation and an exact multiple scattering formulation have been used to compute exciting wave forces, hydrodynamic coefficients and q factors for arrays of interacting wave power devices. The results obtained are compared with each other, and accuracy aspects of the computations are stressed and critically assessed.     

The dynamics of wave induced ship motions in shallow water

The analytical method developed by Svendsen (1968) for a forced heave motion is extended to the general problem of wave induced heave, roll and sway motions of a long ship at a depth of water which is only slightly larger than the draught of the ship. This corresponds, for example, to the situation of a fully loaded ship in a harbour area.After linearization of the problem, the water motion is considered for each of the three individual motions and for the wave reflection-transmission problem for a fixed ship. The ensuing results for the forces on the ship are then synthesized to form the equations of motion, which are presented with all coefficients given, including mooring forces.Analytical and numerical results are given for the three components of motion, for the associated resonance frequencies, and for the hydrodynamic masses and moments of inertia. Finally, the assumptions used are analyzed and evaluated by comparison with measurements and with other results for a special case.     

Phase control through load control of oscillating-body wave energy converters with hydraulic PTO system

Oscillating bodies constitute an important class of wave energy converters, especially for offshore deployment. Phase control by latching has been proposed in the 1970s to enhance the wave energy absorption by oscillating bodies (especially the so-called point absorbers). Although this has been shown to be potentially capable of substantially increasing the amount of absorbed energy, the practical implementation in real irregular waves of optimum phase control has met with theoretical and practical difficulties that have not been satisfactorily overcome. The present paper addresses the case of oscillating-body converters equipped with a high-pressure hydraulic power take-off mechanism (PTO) that provides a natural way of achieving latching: the body remains stationary for as long as the hydrodynamic forces on its wetted surface are unable to overcome the resisting force (gas pressure difference times cross-sectional area of the ram) introduced by the hydraulic PTO system. A method of achieving sub-optimal phase-control is developed, based on the theoretical time-domain modelling of a single-degree of freedom oscillating body in regular and irregular waves, by adequately delaying the release of the body in order to approximately bring into phase the body velocity and the diffraction (or excitation) force on the body, and in this way get closer to the well-known optimal condition derived from frequency-domain analysis for an oscillating body in regular waves.     

Validation of a time-domain strip method to calculate the motions and loads on a fast monohull

The paper presents a comparison between experimental data and numerical results of the hydrodynamic coefficients and also of the wave induced motions and loads on a fast monohull model. The model with 4.52 m length was constructed in Fibre Reinforced Plastic (FRP), and made up of 4 segments connected by a backbone in order to measure sectional loads. The objective of the investigation was to assess the capability of a nonlinear time domain strip method to represent the nonlinear and also the forward speed effects on a displacement high speed vessel advancing in large amplitude waves. With this objective in mind the experimental program included forced oscillation tests in heaving and pitching, for a range of periods, three different amplitudes and several speeds of advance. In head regular waves comprehensive ranges of wave periods, wave steepness and speeds, were tested in order to measure heave, pitch and loads in three cross sections.

The numerical method assumes that the radiation and diffraction hydrodynamic forces are linear and the nonlinear contributions arise from the hydrostatics and Froude–Krilov forces and the effects of green water on deck. The assumption of linearity of the radiation forces is validated by comparing calculated hydrodynamic coefficients with experimental data for three different amplitudes of the forced oscillations. Both global coefficients and sectional coefficients are compared. The motions and loads in waves are compared in terms of first and higher harmonic amplitudes and also in terms of sagging and hogging peaks.     

Hydrodynamic coefficients for a thick-walled bottomless cylindrical body floating in water of finite depth

The paper deals with the linearized hydrodynamic forces acting on a thick-walled, bottomless cylindrical body having vertical symmetry axis and oscillating in water of finite depth. For the solution of the radiation problem, the flow field around the structure is subdivided into ring-shaped fluid regions, in each of which an axisymmetric eigenfunction expansion for the velocity potential is made. By implementing Galerkin's method the various potential solutions are then matched and numerical results concerning the hydrodynamic coefficients for heave, surge and pitch motions, as well as the coupling terms between the last two modes are obtained.     

Forces on a smooth submarine pipeline in random waves — A comparative study

Forces on a smooth submarine pipeline, fixed horizontally near a plane boundary, have been investigated under random wave conditions. The submarine pipeline was subjected to Pierson-Moskowitz spectrum (P-M spectrum) at various energy levels. The water particle kinematics were computed based on the linear random wave model and the Morison equation was chosen as the wave force predictor model. The inline hydrodynamic coefficients of drag and inertia were evaluated using two different methods, one in the frequency domain and the other in the time domain. Five mathematical formulations were considered for the analysis of transverse wave forces and these were compared in terms of the correlation coefficient. The transverse force was also analyzed in terms of the transverse root mean square (rms) coefficient. The inline hydrodynamic coefficients of drag and inertia and the transverse rms coefficient were correlated with the Keulegan-Carpenter number or period parameter, the relative clearance of the pipeline from the bed and the depth parameter. Finally, the results of the random wave tests were compared with those of regular waves under similar pipeline conditions.     

三维随机波浪对桩柱的作用

试验研究了三维随机波浪作用于垂直圆柱上的作用力.采用二维波浪的方法计算三维波浪力,研究了各波力系数随ＫＣ数和波浪方向分布的变化规律,并对三维波力和二维波力进行了对比分析.     

The surge motion of a circular cylinder containing a concentric cylindrical hole in finite depth

This paper deals with hydrodynamic forces of a single semisubmerged circular cylinder containing a concentric cylindrical hole constrained to move in a water domain of finite depth. The fluid domain is divided into inner and outer regions. The Laplace equations governing velocity potentials for the three regions are solved by separation of variables and expressed in terms of eigenfunctions of the resulting equations which satisfy appropriate boundary conditions. Continuity of pressure and velocity at the interface of the regions provides the necessary equations from which the velocity potentials, pressures and forces are obtained. Numerical results are plotted for added mass and damping coefficients for different draft-to-depth and radius-to-depth values and for various wave amplitudes.