Growing folds and sedimentation of the Gosau Group, Muttekopf, Northern Calcareous Alps, Austria

Analysis of the three-dimensional geometry of Upper Cretaceous clastics in the Muttekopf area (Northern Calcareous Alps, Austria) indicate fold and fault structures active during deposition. Coniacian continental to neritic sedimentation (Lower Gosau Subgroup) was contemporaneous with displacements on NW-trending faults and minor folding along NE-trending axes. From the Santonian onwards (sedimentation of the deep-marine Upper Gosau Subgroup) the NW-trending faults were sealed and large folds with WSW-trending axes developed. The direction of contraction changed to N-S after the end of Gosau deposition in the Danian (Paleocene). Synorogenic sedimentation patterns indicate continuous contraction from the Coniacian to the Late Maastrichtian/?Danian. Therefore, large-scale extension as observed in the central part of the Eastern Alps cannot be documented in the western parts of the Northern Calcareous Alps. A combination of subduction tectonic erosion for the frontal parts and gravitational adjustment of an unstable orogen after nappe stacking for the internal parts possibly accounts for the different development of Gosau basins in the frontal and trailing regions of the Austroalpine wedge.     

Deep structure and kinematics of the Northern Calcareous Alps (TRANSALP Profile)

The Northern Calcareous Alps (NCA) of southern Bavaria and northern Tyrol constitute a carbonate-dominated polyphase fold-thrust wedge; together with its Grauwacken Zone Basement, it is the northernmost part of the far-travelled Upper Austroalpine thrust complex of the Eastern Alps. The present geometry developed in several kinematic stages. Jurassic extensional faults that affected large parts of the NCA and their basement originated when the main part of the NCA was still located southeast of the Central Alpine Ötztal-Silvretta complex. These faults and related facies transitions influenced the later style of detachment of the NCA thrust sheets. Mid to Late Cretaceous detachment, thrust-sheet stacking and motion over the Central Alpine complex are registered in clastic deposits of syntectonic basins. The latest Cretaceous to Cenozoic NNE- to N-directed motion of the NCA towards Europe in front of the Central Alpine complex created another set of significant contraction structures, which at depth overprinted all previous structures. During Cretaceous to Cenozoic deformation, the NCA experienced about 80 km of shortening, i.e., about 73% along the TRANSALP Profile. The European basement and autochthonous Mesozoic cover beneath the allochthonous NCA thrust sheets and flysch complexes seem to have remained relatively undeformed.     

Summary of paleomagnetic data from the Central West Carpathians of Poland and Slovakia: Evidence for the late cretaceous-early tertiary transpression

The paper reviews paleomagnetic data from the Central West Carpathians (CWC) of Poland and Slovakia. The CWC constitute an orogen deformed by pre-Tertiary and Tertiary events, situated on the internal side of the Pieniny Klippen Belt and the Tertiary Outer West Carpathian accretionary wedge. The CWC are regarded as the eastern prolongation of the Austroalpine series. There are paleomagnetic evidences for a counterclockwise rotation of the CWC after Oligocene. Having subtracted the effect of this rotation, Middle Cretaceous paleomagnetic poles from the CWC are brought into agreement with preGosau paleopoles from the Upper Austroalpine units of the Northern Calcareous Alps (NCA). It is inferred that a common clockwise rotation of the CWC and NCA had taken place between 90-60 Ma (Middle — Late Cretaceous) during the oblique convergence of the Austroalpine/Central Carpathian realm with the Penninic continental basement.     

The nappe structure of the central Northern Calcareous Alps and its disintegration during Miocene tectonic extrusion—a contribution to understanding the orogenic evolution of the Eastern Alps

The classical concept of the nappe structure of the central Northern Calcareous Alps (NCA) is in contradiction with modern stratigraphic, structural, metamorphic and geochronological data. We first perform a palinspastic restoration for the time before Miocene lateral tectonic extrusion, which shows good continuity of structures, facies and diagenetic/metamorphic zones. We present a new nappe concept, in which the Tirolic unit practically takes the whole area of the central NCA and is divided into three subunits (nappes): Lower and Upper Tirolic subunit, separated by the Upper Jurassic Trattberg Thrust, and the metamorphic Ultra-Tirolic unit. The Hallstatt (Iuvavic) nappe(s) formed the highest unit, but were completely destroyed by erosion after nappe stacking. Remnants of the Hallstatt nappes are only represented by components of up to 1 km in size in Middle/Upper Jurassic radiolaritic wildflysch sediments ("Hallstatt Mélange" belonging to the Tirolic unit). Destruction of the continental margin started in Middle to Upper Jurassic time and prograded from the oceanic side towards the shelf. The original substratum of the external nappes (Bavaric units) of the NCA was largely the Austroalpine crystalline basement, of the internal nappes (Tirolic units) the weakly metamorphosed Palaeozoic sequences (Greywacke Zone and equivalents). Eocene movements caused limited internal deformation in the Tirolic unit.     

Thermal history of the evaporitic Haselgebirge mélange in the Northern Calcareous Alps (Austria)

In the central and eastern part of the Northern Calcareous Alps, Upper Permian evaporitic rocks form a tectonic mélange whose distribution is restricted largely to the topmost thrust unit (Juvavicum). Mudrock and dolostone samples associated with the evaporites in ten major outcrops (mostly mines) were examined in order to constrain the paleothermal conditions of the mélange. Measurements of illite "crystallinity" reveal a regionally variable pattern of metamorphic grade ranging from diagenesis to the high anchizone and possibly epizone. Most samples contained very little organic matter and vitrinite particles were rare. Samples containing vitrinite show consistent minimum reflectance values of ～1.3–1.7% R_o, whereas maximum reflectance values are more variable (up to 4.9%). The former data constrain the minimum burial temperatures to ～160–180°C. The observed variability in illite "crystallinity" and organic maturity both between and within individual outcrops is consistent with the mélange architecture of this unit and is in good agreement with the regional thermal pattern recognized in Middle to Upper Triassic carbonate formations within the Juvavicum by conodont color alteration studies. Mélange formation and heating of the evaporites is suggested to be linked to the Upper Jurassic closure of the Meliata-Hallstatt Ocean and subsequent thrusting of obducted terranes (Juvavicum) into the depositional realm of the Northern Calcareous Alps.     

Anchimetamorphose im Anis und Ladin (Trias) der Nördlichen Kalkalpen zwischen Arlberg und Kaisergebirge — ihre Verbreitung und deren baugeschichtliche Bedeutung

Anisian to Ladinian sedimentary rocks of the Northern Calcareous Alps from the area between the Arlberg pass and the Kaisergebirge mountains have been sampled (more than 2500 samples) in about 50 stratigraphic profiles, recorded in great detail. The (silicate) mineral residue, fraction below 2 micron, resulting from solution in formic acid, has been investigated mineralogically. Its sheet silicate content proved to be markedly homogeneous, containing mainly di-octahedral illite minerals, their crystallinity as most prominent result found to increase in a twofold way:

1. The (Upper Austro-Alpine) Lechtal-Nappe is in its southern part characterized by increasing illite crystallinity from hanging to basal strata within the Ladinian to Anisian stratigraphic column. The source of this effect is found to be older than folding was.
2. The whole area of sedimentary rocks investigated here presents an increase in illite crystallinity data from north to south (i. e. towards the Central Alpine metamorphic units), irrespective of the presently existing tectonic structures (folding or nappe units within the Upper Austro-Alpine of the Northern Calcareous Alps). Hence the source of this effect must be younger than these events were. With this also a broad margin of “anchimetamorphic” influence has been detected within the southern part of the Northern Calcareous Alps, in the area of the Mieminger and Wetterstein mountains showing even a strong extension towards the north (reaching the location of Garmisch-Partenkirchen)

. These effects can by no means be attributed simply to sedimentary mineral distribution. Contradictionary to such an interpretation are the non-conformity of the illite crystallinity distribution within the existing tectonic setting to the original sedimentary position as well as general sedimentary data (paleo-morphology within the sedimentation area compared to homogeneous mineral distribution). Also (former or recent) sedimentary overburden cannot be quoted for as explanation, with no indication for this influence found so far in the stratigraphie profiles investigated at the thick Triassic sedimentary rock sequence in the steep descent of the Southern Karwendel mountains as well as in more than 6400 m of sedimentary rock sequence investigated in the ultradeep exploration borehole Vorderriß 1. The effects described here are attributed to very low grade metamorphic (“anchimetamorphic”) influences detected by these investigations within the Northern Calcareous Alps. A much higher influence due to increase in temperature compared to increase of pressure is indicated by experimental work done by the author. Even with a cautious attempt to incorporate these newly found temperature effects on Triassic sedimentary rocks into the geologic development of the Northern Calcareous Alps and the Alpine Orogeny, at least for the older effect the conception of “transported” metamorphism is implied, perhaps also for the younger one. This idea is furthermore supported by K/Ar — age determinations of well ordered illite minerals gained from the Schwaz Triassic occurrence, yielding data of about 110–120 mio. y. This age for the older temperature effect can be explained in terms of (starting?) subduction of Penninic units below Austro-Alpine units, long before Austro-Alpine nappes reached their present position within the Northern Calcareous Alps.     

Late Cretaceous to Early Tertiary palaeogeography of the Western Carpathians (Slovakia) and the Eastern Alps (Austria): implications from heavy mineral data

The Late Cretaceous Brezová and Myjava Groups of the Western Carpathians in Slovakia and formations of the Gosau Group of the Northern Calcareous Alps in Lower Austria comprise similar successions of alluvial/shallow marine deposits overlain by deep water hemipelagic sediments and turbidites. In both areas the heavy mineral spectra of Late Cretaceous sediments contain significant amounts of detrital chrome spinel. In the Early Tertiary the amount of garnet increases. Cluster analysis and correspondence analysis of Coniacian/Santonian and Campanian/Early Maastrichtian heavy mineral data indicate strong similarities between the Gosau deposits of the Lunz Nappe of the north-eastern part of the Northern Calcareous Alps and the Brezova Group of the Western Carpathians. Similar source areas and a similar palaeogeographical position at the northern active margin of the Adriatic/Austroalpine plate are therefore suggested for the two tectonic units.Basin subsidence mechanisms within the Late Cretaceous of the Northern Calcareous Alps are correlated with the Western Carpathians. Subsidence during the Campanian-Maastrichtian is interpreted as a consequence of subduction tectonic erosion along the active northern margin of the Adriatic/Austroalpine plate. Analogous facies and heavy mineral associations from deep water sandstones of the Manin Unit and the Klape Unit indicate accretion of parts of the Pieniny Klippen Belt during the Late Cretaceous along the Adriatic/Austroalpine margin.     

Late Cretaceous extension overprinting a steep belt in the Northern Calcareous Alps (Schesaplana, R?tikon, Switzerland and Austria)

The Triassic to Cretaceous sediment succession of the Lechtal Nappe in the western part of the Northern Calcareous Alps (NCA) has been deformed into large-scale folds and crosscut by thrust and extensional faults during Late Cretaceous (Eoalpine) and Tertiary orogenic processes. The following sequence of deformation is developed from overprinting relations in the field: (D1) NW-vergent folds related to thrusting; (D2) N–S shortening leading to east–west-trending folds and to the formation of a steep belt (Arlberg Steep Zone) along the southern border of the NCA; (D3) E–W to NE–SW extension and vertical shortening, leading to low-angle normal faulting and recumbent “collapse folds” like the Wildberg Syncline. D1 and D2 are Cretaceous in age and predate the Eocene emplacement of the Austroalpine on the Penninic Nappes along the Austroalpine basal thrust; the same is probably true for D3. Finally, the basal thrust was deformed by folds related to out-of-sequence thrusting. These results suggest that the NCA were at least partly in a state of extension during the sedimentation of the Gosau Group in the Late Cretaceous.     

Balancing lateral orogenic float of the Eastern Alps

Oligocene to Miocene post-collisional shortening between the Adriatic and European plates was compensated by frontal thrusting onto the Molasse foreland basin and by contemporaneous lateral wedging of the Austroalpine upper plate. Balancing of the upper plate shortening by horizontal retrodeformation of lateral escaping and extruding wedges of the Austroalpine lid enables an evaluation of the total post-collisional deformation of the hangingwall plate. Quantification of the north–south shortening and east–west extension of the upper plate is derived from displacement data of major faults that dissect the Austroalpine wedges. Indentation of the South Alpine unit corresponds to 64 km north–south shortening and a minimum of 120 km of east–west extension. Lateral wedging affected the Eastern Alps east of the Giudicarie fault. West of the Giudicarie fault, north–south shortening was compensated by 50 to 80 km of backthrusting in the Lombardian thrust system of the Southern Alps. The main structures that bound the escaping wedges to the north are the Inntal fault system (ca. 50 km sinistral offset), the Königsee–Lammertal–Traunsee (KLT) fault (10 km) and the Salzach–Ennstal–Mariazell–Puchberg (SEMP) fault system (60 km). These faults, as well as a number of minor faults with displacements less than 10 km, root in the basal detachment of the Alps. The thin-skinned nature of lateral escape-related structures north of the SEMP line is documented by industry reflection seismic lines crossing the Northern Calcareous Alps (NCA) and the frontal thrust of the Eastern Alps. Complex triangle zones with passive roof backthrusts of Middle Miocene Molasse sediments formed in front of the laterally escaping wedges of the northern Eastern Alps. The aim of this paper is a semiquantitative reconstruction of the upper plate of the Eastern Alps. Most of the data is published elsewhere.     

Late Jurassic tectonics and sedimentation: breccias in the Unken syncline,central Northern Calcareous Alps

This study analyses and discusses well preserved examples of Late Jurassic structures in the Northern Calcareous Alps, located at the Loferer Alm, about 35 km southwest of Salzburg. A detailed sedimentary and structural study of the area was carried out for a better understanding of the local Late Jurassic evolution. The Grubhörndl and Schwarzenbergklamm breccias are chaotic, coarse-grained and locally sourced breccias with mountain-sized and hotel-sized clasts, respectively. Both breccias belong to one single body of breccias, the Grubhörndl breccia representing its more proximal and the Schwarzenbergklamm breccia its more distal part, respectively. Breccia deposition occurred during the time of deposition of the Ruhpolding Radiolarite since the Schwarzenbergklamm breccia is underlain and overlain by these radiolarites. Formation of the breccias was related to a major, presumably north-south trending normal fault scarp. It was accompanied and post-dated by west-directed gravitational sliding of the Upper Triassic limestone (“Oberrhätkalk”), which was extended by about 6% on top of a glide plane in underlying marls. The breccia and slide-related structures are sealed and blanketed by Upper Jurassic and Lower Cretaceous sediments. The normal fault scarp, along which the breccia formed, was probably part of a pull-apart basin associated with strike slip movements. On a regional scale, however, we consider this Late Jurassic strike-slip activity in the western part of the Northern Calcareous Alps to be synchronous with gravitational emplacement of “exotic” slides and breccias (Hallstatt mélange), triggered by Late Jurassic shortening in the eastern part of the Northern Calcareous Alps. Hence, two competing processes affected one and the same continental margin.     

Das Altpaläozoikum und Unterkarbon des Gurktaler Deckensystems (Ostalpen) und ihre paläogeographischen Beziehungen

The Paleozoic sequences of the Gurktal nappe (Eastern Alps) can be divided into two tectonic units by means their facies development: (1) The lower Murau nappe is characterized by low grade metamorphic black schists, calcareous phyllites of predominantly Silurian age (?) and some hundred meters of carbonates of predominantly Lower Devonian age. (2) The higher Stolzalpe nappe, metamorphosed very low to low grade, contains Ordovician to Lower Silurian volcanic formations. There can be recognized three facies during Upper Silurian to Lower Devonian times. The higher Devonian to Lower Carboniferous is dominated by more or less pelagic carbonates. After the facies distribution of Paleozoic rocks other parts of southern Austroalpine show a similar tectonic feature. The Stolzalpe nappe is related to the upper nappes of Austroalpine (i. e. Noric nappe system, northern parts of Paleozoic of Graz) and also western Carnics. The clastic and carbonate complexes of Murau nappe, Schöckel nappe s. 1. (Paleozoic of Graz) and Murides crystalline (middle Austroalpine) are developed very similar. Some features of Paleozoic fades distribution show a NE to SW trend crossing the alpidic structure. Because of conglomerates with crystalline components near the base is postulated a preUpper Ordovician basement complex for this realm.     

Evidence for Jurassic subduction from the Northern Calcareous Alps (Berchtesgaden; Austroalpine,Germany)

The closure of the western part of the Neotethys Ocean started in late Early Jurassic. The Middle to early Late Jurassic contraction is documented in the Berchtesgaden Alps by the migration of trench-like basins formed in front of a propagating thrust belt. Due to ophiolite obduction these basins propagated from the outer shelf area (=Hallstatt realm) to the interior continent (=Hauptdolomit/Dachstein platform realm). The basins were separated by nappe fronts forming structural highs. This scenario mirrors syn-orogenic erosion and deposition in an evolving thrust belt. Active basin formation and nappe thrusting ended around the Oxfordian/Kimmeridgian boundary, followed by the onset of carbonate platforms on structural highs. Starved basins remained between the platforms. Rapid deepening around the Early/Late Tithonian boundary was induced by extension due to mountain uplift and resulted in the reconfiguration of the platforms and basins. Erosion of the uplifted nappe stack including obducted ophiolites resulted in increased sediment supply into the basins and final drowning and demise of the platforms in the Berriasian. The remaining Early Cretaceous foreland basins were filled up by sediments including siliciclastics. The described Jurassic to Early Cretaceous history of the Northern Calcareous Alps accords with the history of the Western Carpathians, the Dinarides, and the Albanides, where (1) age dating of the metamorphic soles prove late Early to Middle Jurassic inneroceanic thrusting followed by late Middle to early Late Jurassic ophiolite obduction, (2) Kimmeridgian to Tithonian shallow-water platforms formed on top of the obducted ophiolites, and (3) latest Jurassic to Early Cretaceous sediments show postorogenic character.     

Late Cretaceous, synorogenic, low-angle normal faulting along the Schlinig fault (Switzerland, Italy, Austria) and its significance for the tectonics of the Eastern Alps

The Schlinig fault at the western border of theÖtztal nappe (Eastern Alps), previously interpreted as a west-directed thrust, actually represents a Late Cretaceous, top-SE to -ESE normal fault, as indicated by sense-of-shear criteria found within cataclasites and greenschist-facies mylonites. Normal faulting postdated and offset an earlier, Cretaceous-age, west-directed thrust at the base of theÖtztal nappe. Shape fabric and crystallographic preferred orientation in completely recrystallized quartz layers in a mylonite from the Schlinig fault record a combination of (1) top-east-southeast simple shear during Late Cretaceous normal faulting, and (2) later north-northeast-directed shortening during the Early Tertiary, also recorded by open folds on the outcrop and map scale. Offset of the basal thrust of theÖtztal nappe across the Schlinig fault indicates a normal displacement of 17 km. The fault was initiated with a dip angle of 10° to 15° (low-angle normal fault). Domino-style extension of the competent Late Triassic Hauptdolomit in the footwall was kinematically linked to normal faulting.

The Schlinig fault belongs to a system of east- to southeast-dipping normal faults which accommodated severe stretching of the Alpine orogen during the Late Cretaceous. The slip direction of extensional faults often parallels the direction of earlier thrusting (top-W to top-NW), only the slip sense is reversed and the normal faults are slightly steeper than the thrusts. In the western Austroalpine nappes, extension started at about 80 Ma and was coeval with subduction of Piemont-Ligurian oceanic lithosphere and continental fragments farther west. The extensional episode led to the formation of Austroalpine Gosau basins with fluviatile to deep-marine sediments. West-directed rollback of an east-dipping Piemont-Ligurian subduction zone is proposed to have caused this stretching in the upper plate.     

Alpine geodynamic evolution of passive and active continental margin sequences in the Tauern Window (eastern Alps, Austria, Italy): a review

The Penninic oceanic sequence of the Glockner nappe and the foot-wall Penninic continental margin sequences exposed within the Tauern Window (eastern Alps) have been investigated in detail. Field data as well as structural and petrological data have been combined with data from the literature in order to constrain the geodynamic evolution of these units. Volcanic and sedimentary sequences document the evolution from a stable continent that was formed subsequent to the Variscan orogeny, to its disintegration associated with subsidence and rifting in the Triassic and Jurassic, the formation of the Glockner oceanic basin and its consumption during the Upper Cretaceous and the Paleogene. These units are incorporated into a nappe stack that was formed during the collision between a Penninic Zentralgneis block in the north and a southern Austroalpine block. The Venediger nappe and the Storz nappe are characterized by metamorphic Jurassic shelf deposits (Hochstegen group) and Cretaceous flysch sediments (Kaserer and Murtörl groups), the Eclogite Zone and the Rote Wand–Modereck nappe comprise Permian to Triassic clastic sequences (Wustkogel quartzite) and remnants of platform carbonates (Seidlwinkl group) as well as Jurassic volcanoclastic material and rift sediments (Brennkogel facies), covered by Cretaceous flyschoid sequences. Nappe stacking was contemporaneous to and postdated subduction-related (high-pressure) eclogite and blueschist facies metamorphism. Emplacement of the eclogite-bearing units of the Eclogite zone and the Glockner nappe onto Penninic continental units (Zentralgneis block) occurred subsequent to eclogite facies metamorphism. The Eclogite zone, a former extended continental margin, was subsequently overridden by a pile of basement-cover nappes (Rote Wand–Modereck nappe) along a ductile out-of-sequence thrust. Low-angle normal faults that have developed during the Jurassic extensional phase might have been inverted during nappe emplacement.     

Wolframite- and scheelite-bearing carbonate rocks of the Nock mountains,Austria: A new type of tungsten mineralization in the Eastern Alps

A new type of tungsten deposit was discovered in the Eastern Alps at the Mallnock, Nock mountains, Austria. The mineralization is restricted to concordant layers of carbonate rocks within phyllites belonging to the metamorphic Palaeozoic of the Upper Austroalpine Gurktal nappe system. Wolframite (ferberite 95) and scheelite occur as network fissure fillings in coarse-grained Fe-magnesite (siderite 15) rocks (average W content ca. 0.9 wt%); fine-grained dolomite marbles contain scheelite as the only tungsten mineral (average W content ca. 0.5 wt%). Assuming the dolomite marbles as a primary metal source, mobilization processes are responsible for the formation of the wolframite- and scheelite-bearing Fe-magnesite rocks.