Formation of a Switchback During the Rising Phase of Solar Cycle 21

The customary notion that high-latitude filaments arise from magnetic flux originating in the active-region belts finds its modern expression in numerical models that generate filament channels from flux patterns migrating from active latitudes to the polar caps. Polarity inversions underlying high-latitude filament channels are swept into distinct patterns called `switchbacks' under the joint influence of differential rotation, supergranular diffusion, and meridional flow. The numerical model of Mackay and van Ballegooijen (2001) predicts a heretofore unsuspected solar-cycle dependence to the hemispheric pattern of filament magnetic fields. Observations presented here of a switchback formed early in cycle 21 confirm some key aspects of their model. In this remarkable example the flux diffusing out of the source region migrates to the opposite side of the Sun before it encounters another active region with which to create the quadrupolar field configuration wherein a return arm forms to complete the switchback.     

A rope-shaped solar filament and a IIIb flare

On September 14–18, 2000, a medium-small solar active region was observed at Ganyu Station of Purple Mountain Observatory. Its spots were not large, but it had a peculiar active filament. On Sep.16, a flare of importance III_b with rather intense geophysical effects was produced. Our computation of the magnetic structure of the active region reveals that the rope-shaped filament was concerned with a low magnetic arc close to magnetic neutral line. An intense shear of magnetic field occurred near magnetic rope. The QSL analysis shows that a 3-D magnetic reconnection might appear in the vicinity of filament, and this can be used to interpret the formation of a large flare.     

The eruption of active region filaments and its relation to the triggering of a solar flare

The formation and eruption of active region filaments is supposed to be caused by the increase of a concentrated current embedded in the active region background magnetic field of an active region according to the theory of Van Tend and Kuperus (1978).The onset of a filament eruption is due to either changes in the background magnetic field or the increase of the filament current intensity. Both processes can be caused by the emergence of new magnetic flux as well as by the motion of the photospheric footpoints of the magnetic field lines. It is shown that if the background field evolves from a potential field to a nearly force-free field the vertical equilibrium of the current filament is not affected, but large forces are generated along the filament axis. This is identified as the cause of filament activation and the increase in filament turbulence during the flare build-up phase. Depending on the evolution of the background field and the current filament, two different scenarios for flare build-up and filament eruption are distinguished.This work was done while one of the authors (M.K.) was participating in the CECAM workshop on Physics of Solar Flares held at Orsay, France, in June 1979.     

Morphological relationships in the chromospheric Hα fine structure

A continuous relationship is proposed between the basic elements of the dark fine structure of the quiet and active chromosphere. A progression from chromospheric bushes to fibrils, then to chromospheric threads and active region filaments, and finally to diffuse quiescent filaments, is described. It is shown that the horizontal component of the field on opposite sides of an active region quiescent filament can be in the same direction and closely parallel to the filament axis. Consequently, it is unnecessary to postulate twisted or otherwise complex field configurations to reconcile the support mechanism of filaments with the observed motion along their axis.     

Formation, Interaction and Merger of an Active Region and a Quiescent Filament Prior to Their Eruption on 19 May 2007

We report observations of the formation of two filaments?–?one active and one quiescent, and their subsequent interactions prior to eruption. The active region filament appeared on 17 May 2007, followed by the quiescent filament about 24 hours later. In the 26 hour interval preceding the eruption, which occurred at around 12:50 UT on 19 May 2007, we see the two filaments attempting to merge and filament material is repeatedly heated suggesting magnetic reconnection. The filament structure is observed to become increasingly dynamic preceding the eruption with two small hard X-ray sources seen close to the active part of the filament at around 01:38 UT on 19 May 2007 during one of the activity episodes. The final eruption on 19 May at about 12:51 UT involves a complex CME structure, a flare and a coronal wave. A magnetic cloud is observed near Earth by the STEREO-B and WIND spacecraft about 2.7 days later. Here we describe the behaviour of the two filaments in the period prior to the eruption and assess the nature of their dynamic interactions.     

A Complex Filament Evolution

A complex filament composed by a main body a polar filament and a tail—a small filament situated between active regions, was observed between 6 and 14 January 2001. A decaying active region plays the role of attractor for this filament. We have studied the dynamics of the filament which disappeared in a spectacular CME, produced after a helical up-awarded movement of plasma in the filaments loops.     

A note on chromospheric fine structure at active region polarity boundaries

High resolution H filtergrams from Big Bear Solar Observatory reveal that some filamentary features in active regions have fine structure and hence magnetic field transverse to the gross structure and the zero longitudinal field line. These features are distinct from the usual active region filament, in which fine structure, magnetic field and filament are all parallel to the zero longitudinal field line. The latter occur on boundaries between regions of weaker fields while the former occur at boundaries between regions of stronger field.     

Determining the Intrinsic CME Flux Rope Type Using Remote-sensing Solar Disk Observations

A key aim in space weather research is to be able to use remote-sensing observations of the solar atmosphere to extend the lead time of predicting the geoeffectiveness of a coronal mass ejection (CME). In order to achieve this, the magnetic structure of the CME as it leaves the Sun must be known. In this article we address this issue by developing a method to determine the intrinsic flux rope type of a CME solely from solar disk observations. We use several well-known proxies for the magnetic helicity sign, the axis orientation, and the axial magnetic field direction to predict the magnetic structure of the interplanetary flux rope. We present two case studies: the 2 June 2011 and the 14 June 2012 CMEs. Both of these events erupted from an active region, and despite having clear in situ counterparts, their eruption characteristics were relatively complex. The first event was associated with an active region filament that erupted in two stages, while for the other event the eruption originated from a relatively high coronal altitude and the source region did not feature a filament. Our magnetic helicity sign proxies include the analysis of magnetic tongues, soft X-ray and/or extreme-ultraviolet sigmoids, coronal arcade skew, filament emission and absorption threads, and filament rotation. Since the inclination of the post-eruption arcades was not clear, we use the tilt of the polarity inversion line to determine the flux rope axis orientation and coronal dimmings to determine the flux rope footpoints, and therefore, the direction of the axial magnetic field. The comparison of the estimated intrinsic flux rope structure to in situ observations at the Lagrangian point L1 indicated a good agreement with the predictions. Our results highlight the flux rope type determination techniques that are particularly useful for active region eruptions, where most geoeffective CMEs originate.     

Eruption of an Active-Region Filament Driven by an Emerging Bipole

1 INTRODUCTION Filaments are cool, dense material suspended in the hot, tenuous corona. It is widely accepted that the global magnetic field surrounding the filaments plays a key role in their formation, structure and stability (Tandberg-Hanssen1995). Fil…     

The effect of retardation on the stability of current filaments

We investigate the influence of the finite Alfvén velocity on the evolution of an active region filament. In general, variations of a current result in variations of the magnetic fields which spread around with the Alfvén velocity. As a consequence of the fact that a magnetic field can only change with the Alfvén velocity, a filament will experience the photospheric boundary conditions as these were at an Alfvén travel time back in time. The inclusion of this retardation effect in the momentum equation of a filament leads effectively to an extra force term. This force contribution acts in the direction in which the filament moves and has therefore a destabilizing effect on the filament. Because a moving filament acts as an antenna of Alfvén waves, the filament loses energy by the emission process. This leads to a radiative damping term in the equation of motion of the filament. In general, the radiative damping will be sufficiently strong to counteract the retardation instability. Numerical simulations show that during the energy build-up phase a filament follows the van Tend-Kuperus equilibrium curve. After the van Tend-Kuperus equilibrium has disappeared the filament goes through a transient phase moving with a sub-Alfvénic velocity upward. At greater heights the repulsive Lorentz force of the photospheric surface current magnetic field is balanced by the radiative damping, resulting in a decreasing filament velocity.Parts of this paper were presented at the 4th CESRA Workshop in Ouranopolis (Greece) in 1991.     

Vertical velocities and oscillations in quiescent filaments

Analysis of He i 10 830 Å spectral observations of a large, quiescent filament reveals a pronounced oscillatory behaviour of the vertical mass motion. The filament is situated in a quiet region more than 15° away from the nearest active region.It is concluded that the magnetic field of the quiescent filament, which occurs in the form of long thin flux ropes, moves with the gas and that there is no net mass flow perpendicular to the most frequently observed horizontal field lines. The oscillatory motion is accompanied by phase dependent variation of the He i line intensity which could possibly imply wave induced compression of the plasma.     

Properties of filaments in solar cycle 20-23 from McIntosh Archive

A filament is a cool, dense structure suspended in the solar corona. The eruption of a filament is often associated with a coronal mass ejection(CME), which has an adverse effect on space weather. Hence,research on filaments has attracted much attention in the recent past. The tilt angle of active region(AR)magnetic bipoles is a crucial parameter in the context of the solar dynamo, which governs the conversion efficiency of the toroidal magnetic field to poloidal magnetic field. Filaments always form over polarity inversion lines(PILs), so the study of tilt angles for these filaments can provide valuable information about generation of a magnetic field in the Sun. We investigate the tilt angles of filaments and other properties using McIntosh Archive data. We fit a straight line to each filament to estimate its tilt angle. We examine the variation of mean tilt angle with time. The latitude distribution of positive tilt angle filaments and negative tilt angle filaments reveals that there is a dominance of positive tilt angle filaments in the southern hemisphere and negative tilt angle filaments dominate in the northern hemisphere. We study the variation of the mean tilt angle for low and high latitudes separately. Investigations of temporal variation with filament number indicate that total filament number and low latitude filament number vary cyclically, in phase with the solar cycle. There are fewer filaments at high latitudes and they also show a cyclic pattern in temporal variation. We also study the north-south asymmetry of filaments with different latitude criteria.     

Transequatorial Filament Eruption and Its Link to a Coronal Mass Ejection

We revisit the Bastille Day flare/CME Event of 2000 July 14, and demonstrate that this flare/CME event is not related to only one single active region (AR). Activation and eruption of a huge transequatorial filament are seen to precede the simultaneous filament eruption and flare in the source active region, NOAA AR 9077, and the full halo-CME in the high corona. Evidence of reconfiguration of large-scale magnetic structures related to the event is illustrated by SOHO EIT and Yohkoh SXT observations, as well as, the reconstructed 3D magnetic lines of force based on the force-free assumption. We suggest that the AR filament in AR9077 was connected to the transequatorial filament. The large-scale magnetic composition related to the transequatorial filament and its sheared magnetic arcade appears to be an essential part of the CME parent magnetic structure. Estimations show that the filament-arcade system has enough magnetic helicity to account for the helicity carried by the related CMEs. In addition, rather global magnetic connectivity, covering almost all the visible range in longitude and a huge span in latitude on the Sun, is implied by the Nancay Radioheliograph (NRH) observations. The analysis of the Bastille Day event suggests that although the triggering of a global CME might take place in an AR, a much larger scale magnetic composition seems to be the source of the ejected magnetic flux, helicity and plasma. The Bastille Day event is the first described example in the literature, in which a transequatorial filament activity appears to play a key role in a global CME. Many tens of halo-CME are found to be associated with transequatorial filaments and their magnetic environment.     

An EUV Jet and Hα Filament Eruption Associated with Flux Cancelation in a Decaying Active Region

Using data from the Transition Region and Coronal Explorer (TRACE), Solar and Heliospheric Observatory (SOHO), Ramaty High Energy Solar Spectroscopic Imager (RHESSI), and Hida Observatory (HO), we present a detailed study of an EUV jet and the associated Hα filament eruption in a major flare in the active region NOAA 10044 on 29 July 2002. In the Hα line wings, a small filament was found to erupt out from the magnetic neutral line of the active region during the flare. Two bright EUV loops were observed rising and expanding with the filament eruption, and both hot and cool EUV plasma ejections were observed to form the EUV jet. The two thermal components spatially separated from each other and lasted for about 25 minutes. In the white-light corona data, a narrow coronal mass ejection (CME) was found to respond to this EUV jet. We cannot find obvious emerging flux in the photosphere accounting for the filament eruption and the EUV jet. However, significant sunspot decay and magnetic-flux cancelation owing to collision of opposite flux before the events were noticed. Based on the hard X-ray data from RHESSI, which showed evidence of magnetic reconnection along the main magnetic neutral line, we think that all of the observed dynamical phenomena, including the EUV jet, filament eruption, flare, and CME, should have a close relation to the flux cancelation in the low atmosphere.     

Magnetic source regions of coronal mass ejections

The majority of flare activity arises in active regions which contain sunspots, while Coronal Mass Ejection (CME) activity can also originate from decaying active regions and even so-called quiet solar regions which contain a filament. Two classes of CME, namely flare-related CME events and CMEs associated with filament eruption are well reflected in the evolution of active regions. The presence of significant magnetic stresses in the source region is a necessary condition for CME. In young active regions magnetic stresses are increased mainly by twisted magnetic flux emergence and the resulting magnetic footpoint motions. In old, decayed active regions twist can be redistributed through cancellation events. All the CMEs are, nevertheless, caused by loss of equilibrium of the magnetic structure. With observational examples we show that the association of CME, flare and filament eruption depends on the characteristics of the source regions:

?the strength of the magnetic field, the amount of possible free energy storage,

?the small- and large-scale magnetic topology of the source region as well as its evolution (new flux emergence, photospheric motions, cancelling flux), and

?the mass loading of the configuration (effect of gravity). These examples are discussed in the framework of theoretical models.

     

Filament Eruption in NOAA 11093 Leading to a Two-Ribbon M1.0 Class Flare and CME

We present a multi-wavelength analysis of an eruption event that occurred in active region NOAA 11093 on 7 August 2010, using data obtained from SDO, STEREO, RHESSI, and the GONG Hα network telescope. From these observations, we inferred that an upward slow rising motion of an inverse S-shaped filament lying along the polarity inversion line resulted in a CME subsequent to a two-ribbon flare. Interaction of overlying field lines across the filament with the side-lobe field lines, associated EUV brightening, and flux emergence/cancelation around the filament were the observational signatures of the processes leading to its destabilization and the onset of eruption. Moreover, the time profile of the rising motion of the filament/flux rope corresponded well with flare characteristics, viz., the reconnection rate and hard X-ray emission profiles. The flux rope was accelerated to the maximum velocity as a CME at the peak phase of the flare, followed by deceleration to an average velocity of 590 km s⁻¹. We suggest that the observed emergence/cancelation of magnetic fluxes near the filament caused it to rise, resulting in the tethers to cut and reconnection to take place beneath the filament; in agreement with the tether-cutting model. The corresponding increase/decrease in positive/negative photospheric fluxes found in the post-peak phase of the eruption provides unambiguous evidence of reconnection as a consequence of tether cutting.     

Solar proton flare 4B/X17.2 on October 28, 2003. Photometric results

The powerful flare 4B/X17.2 of October 28, 2003 in the NOAA 10486 active region is studied by using H_α filtergrams. This active region had a complicated βγδ magnetic configuration and a sigmoidal pattern of the polarity inversion line, it had the largest AR area in the cycle 23. Local filaments, loops, and systems of loops were also observed in the AR. The light curves obtained for all flare knots clearly reveal two stages in their evolution. The first stage is the pre-flare one, when the accumulation of the nonpotential magnetic energy (the energy of electric currents) comes to an end and the situation becomes favorable for the realization of the second period. The intensity of flare knots (except one knot) changed slightly and slowly, and some structure features (twists and connections) became more active. By the end of the first stage a new magnetic flux emerged and a system of interrelated filaments and loops (IFL) was formed at the center of the AR as well as at its periphery. New flare knots appeared about the main S-like filament. The second flare stage began at about 11:02 UT with a dramatic increase of the intensity and area of all flare knots and the formation of new knots. In a space of 8 min the major part of the AR around the main filament was covered with flare emission which fluctuated at its maximum period. The intensity of all knots was observed to drop slowly after the maximum, at the decay phase. As the IFL system extended over the entire AR, the magnetic field energy accumulated in it was released in the form of powerful electromagnetic and corpuscular emission by way of magnetic reconnection.     

Mass motions associated with Hα active region arch structures

We have studied mass motions associated with active region arch structures from observations of a developing active region near the center of the solar disk. We present a method for the computation of the line-of-sight velocity from photographs at H ± 0.5 under the assumption of Beckers' cloud model and reasonable assumptions about the Doppler width and optical depth of the arches. Some arches show motions typical to arch filaments (the material moves towards the observer near the apex of the arch and away from the observer near the footpoints), while in others the velocity field is more complex. Assuming a symmetric loop, we reconstructed the velocity vector along an arch filament. The results are consistent with the picture where material is draining out of the filament while the whole structure is ascending with a velocity near that of the apex, which does not exceed 10 km s^–1. The motion is systematically slower than expected from a free-fall model.     

太阳的磁绳暗条和一个Ⅲb级耀斑

2000年9月14－18日在紫金山天文台赣榆观测站观测到太阳上有一个中小型活动区，黑子面积不大，但有一个奇特的活动区暗条，16日产生了一个Ⅲb级耀斑，有较强的地球物理效应。计算该区的磁结构，结果发现此磁绳状暗条与磁中性线附近低磁弧系相关，磁场在磁绳附近有强剪切，QSL分析显示三维磁重联能够在暗条附近出现，这可解释大耀斑的形成。