The Bekten Fault: the palaeoseismic behaviour and kinematic characteristics of an intervening segment of the North Anatolian Fault Zone,Southern Marmara Region,Turkey

The Bekten Fault is 20-km long N55°E trending and oblique-slip fault in the dextral strike-slip fault zone. The fault is extending sub-parallel between Yenice-Gönen and Sar?köy faults, which forms the southern branch of North Anatolian Fault Zone in Southern Marmara Region. Tectonomorphological structures indicative of the recent fault displacements such as elongated ridges and offset creeks observed along the fault. In this study, we investigated palaeoseismic activities of the Bekten Fault by trenching surveys, which were carried out over a topographic saddle. The trench exposed the fault and the trench stratigraphy revealed repeated earthquake surface rupture events which resulted in displacements of late Pleistocene and Holocene deposits. According to radiocarbon ages obtained from samples taken from the event horizons in the stratigraphy, it was determined that at least three earthquakes resulting in surface rupture generated from the Bekten Fault within last ~1300 years. Based on the palaeoseismological data, the Bekten Fault displays non-characteristic earthquake behaviour and has not produced any earthquake associated with surface rupture for about the last 400 years. Additionally, the data will provide information for the role of small fault segments play except for the major structures in strike-slip fault systems.     

Historical earthquake activity of the northern part of the Dead Sea Fault Zone, southern Turkey

The northern part of the Dead Sea Fault Zone is one of the major active neotectonic structures of Turkey. The main trace of the fault zone (called Hacıpaşa fault) is mapped in detail in Turkey on the basis of morphological and geological evidence such as offset creeks, fault surfaces, shutter ridges and linear escarpments. Three trenches were opened on the investigated part of the fault zone. Trench studies provided evidence for 3 historical earthquakes and comparing trench data with historical earthquake records showed that these earthquakes occurred in 859 AD, 1408 and 1872. Field evidence, palaeoseismological studies and historical earthquake records indicate that the Hacıpaşa fault takes the significant amount of slip in the northern part of the Dead Sea Fault Zone in Turkey. On the basis of palaeoseismological evidence, it is suggested that the recurrence interval for surface faulting event is 506 ± 42 years on the Hacıpaşa fault.     

Dating recent colluvial sequences with Pb and Cs along an active fault scarp, the Eliki Fault, Gulf of Corinth, Greece

Reliable dating is an essential element of palaeoseismological studies, yet whilst a suite of geochronological methods can now provide late Quaternary age control it remains very difficult to date modern events (i.e., those occurring within the last 150 years). This is significant because the starting point for many palaeoseismological investigations is a modern surface-rupturing event, whose geological effects need to be disentangled in trench stratigraphies from palaeoseismic ruptures. Two dating methods which, in combination, can provide robust dating control in recently deposited sediments are the ²¹⁰Pb and ¹³⁷Cs dating methods. Here, we test the applicability of using ²¹⁰Pb and ¹³⁷Cs to date colluvial sediments exposed in three trenches excavated across an earthquake fault—the Eliki fault, Gulf of Corinth, Greece—which ruptured in an earthquake in 1861. The ²¹⁰Pb and ¹³⁷Cs profiles observed in these colluvial sequences are relatively erratic due to the mixed nature of the sediments, i.e., their deposition in an environment where the supply of slope sediments is driven by seasonal rainfall, causing non-uniform sediment accretion and sediment reworking. In one trench, however, ²¹⁰Pb dating, corroborated by ¹³⁷Cs dating, indicates that a proposed post-1861 surface colluvial unit has been deposited over the period 1950 AD–present (at a rate of ca. 9 mm/year), and overlies a significantly older unit (>120 years old). The dating control provided here by ²¹⁰Pb and ¹³⁷Cs dating corroborates the published interpretation of the trench stratigraphy, and refines the ¹⁴C-based estimated dates for the upper unit. At two other trenches ²¹⁰Pb and ¹³⁷Cs dating only provided minimum ages (based on the presence or absence of ²¹⁰Pb_excess and ¹³⁷Cs). Such approximate ages, however, may still useful in corroborating interpretations made using the trench stratigraphy, or, at sites which have long earthquake recurrence intervals, determining which earthquake event was responsible for a particular bed offset.     

Geomorphic expression of neotectonic activity in a low relief area in an Airborne Laser Scanning DTM: A case study of the Little Hungarian Plain (Pannonian Basin)

The NW corner of the Little Hungarian Plain, which lies at the junction of the Eastern Alps, the Pannonian Basin and the Western Carpathians, is a neotectonically active region linking the extrusional tectonics of the Eastern Alps with the partly subsiding Little Hungarian Plain. The on-going deformation is verified by the earthquake activity in the region. An extremely flat part of the area, east of Neusiedlersee, the so-called Seewinkel, has been investigated with Airborne Laser Scanning (ALS, also known as airborne LiDAR) techniques, resulting in a digital terrain model (DTM) with a 1 m grid resolution and vertical precision of better than 10 cm. The DTM has been compared with known and inferred neotectonic features.Potential neotectonic structures of the DTM have been evaluated, together with geological maps, regional tectono-geomorphic studies, geophysical data, earthquake foci, as well as geomorphological features and the Quaternary sediment thickness values of the Seewinkel and the adjacent Parndorfer plateau. A combined evaluation of these data allows several tectonic features with a relief of < 2 m to be recognized in the DTM. The length of these linear geomorphological structures ranges from several hundred meters up to several kilometers. The most prominent feature forms a 15 km long, linear, 2 m high NE–SW trending ridge with gravel occurrences having an average grain size of ca. 5 cm on its top. We conclude this feature to represent the surface expression of the previously recognized Mönchhof Fault. In general, this multi-disciplinary case study shows that ALS DTMs are extremely important for tectono-geomorphic investigations, as they can detect and accurately locate neotectonic structures, especially in low-relief areas.     

Submarine fan and slope-apron deposition in a Cretaceous Forearc Basin: The Gürsökü Formation (Kavak–Samsun, N. Turkey)

The Late Cretaceous Gürsökü Formation represents the proximal fill of the Sinop–Samsun Forearc Basin that was probably initiated by extension during the Early Cretaceous. The succession records sedimentation in two contrasting depositional systems: a slope-apron flanking a faulted basin margin and coarse-grained submarine fans. The slope-apron deposits consist of thinly bedded turbiditic sandstones and mudstones, interbedded with non-channelized chaotic boulder beds and intraformational slump sheets representing a spectrum of processes ranging from debris flow to submarine slides. The submarine fan sediments are represented by conglomerates and sandstones interpreted as deposited from high density turbidity currents and non-cohesive debris flows. The occurrence of both slope apron and submarine fan depositional systems in the Gürsökü Formation may indicates that the region was a tectonically active basin margin during the Late Cretaceous.     

A robust satellite technique for monitoring seismically active areas: The case of Bhuj–Gujarat earthquake

A robust satellite data analysis technique (RAT) has been recently proposed as a suitable tool for satellite TIR surveys in seismically active regions and already successfully tested in different cases of earthquakes (both high and medium–low magnitudes).In this paper, the efficiency and the potentialities of the RAT technique have been tested even when it is applied to a wide area with extremely variable topography, land coverage and climatic characteristics (the whole Indian subcontinent). Bhuj–Gujarat's earthquake (occurred on 26th January 2001, M_S  7.9) has been considered as a test case in the validation phase, while a relatively unperturbed period (no earthquakes with M_S ≥ 5, in the same region and in the same period) has been analyzed for confutation purposes. To this aim, 6 years of Meteosat-5 TIR observations have been processed for the characterization of the TIR signal behaviour at each specific observation time and location.The anomalous TIR values, detected by RAT, have been evaluated in terms of time–space persistence in order to establish the existence of actually significant anomalous transients. The results indicate that the studied area was affected by significant positive thermal anomalies which were identified, at different intensity levels, not far from the Gujarat coast (since 15th January, but with a clearer evidence on 22nd January) and near the epicentral area (mainly on 21st January). On 25th January (1 day before Gujarat's earthquake) significant TIR anomalies appear on the Northern Indian subcontinent, showing a remarkable coincidence with the principal tectonic lineaments of the region (thrust Himalayan boundary).On the other hand, the results of the confutation analysis indicate that no meaningful TIR anomalies appear in the absence of seismic events with M_S ≥ 5.     

Three magnitude 7 earthquakes on a single fault in central Italy in 1400 years,evidenced by new palaeoseismic results

New palaeoseismic trenching across the main splay of the Fucino fault system provides evidence for a High Middle Age surface‐faulting episode conceivably associated with a disruptive earthquake, similar to the one that occurred in 1915 (Mw 7.0). The existence of this event, which has already been suggested by some previous studies, implies a shortening of the recurrence interval for Mw 7.0 earthquakes with respect to current knowledge. If we assume that the palaeoseismic Holocene record is complete, this shortening is focused in the historical period, when the Fucino structure sourced three strong earthquakes in only 1.4 ka. A similar clustering of energy release in the recent past is consistent with both palaeoseismological studies on other faults affecting the Apennine divide, and the high GPS strain rates observed in the same chain sectors.     

3D modeling of earthquake cycles of the Xianshuihe fault,southwestern China

We perform 3D modeling of earthquake generation of the Xianshuihe fault, southwestern China, which is a highly active strike-slip fault with a length of about 350 km, in order to understand earthquake cycles and segmentations for a long-term forecasting and earthquake nucleation process for a short-term forecasting. Historical earthquake data over the last 300 years indicates repeated periods of seismic activity, and migration of large earthquake along the fault during active seismic periods. To develop the 3D model of earthquake cycles along the Xianshuihe fault, we use a rate- and state-dependent friction law. After analyzing the result, we find that the earthquakes occur in the reoccurrence intervals of 400–500 years. Simulation result of slip velocity distribution along the fault at the depth of 10 km during 2694 years along the Xianshuihe fault indicates that since the third earthquake cycle, the fault has been divided into 3 parts. Some earthquake ruptures terminate at the bending part of the fault line, which may means the shape of the fault line controls how earthquake ruptures. The change of slip velocity and displacement at 10 km depth is more tremendous than the change of the shallow and deep part of the fault and the largest slip velocity occurs at the depth of 10 km which is the exact depth of the seismic zone where fast rupture occurs.     

Analysis of Izmit aftershocks 25 days before the November 12th 1999 Düzce earthquake, Turkey

We investigate spatial clustering of 2414 aftershocks along the Izmit M_w = 7.4 August 17, 1999 earthquake rupture zone. 25 days prior to the Düzce earthquake M_w = 7.2 (November 12, 1999), we analyze two spatial clusters, namely Sakarya (SC) and Karadere–Düzce (KDC). We determine the earthquake frequency–magnitude distribution (b-value) for both clusters. We find two high b-value zones in SC and one high b-value zone in KDC which are in agreement with large coseismic surface displacements along the Izmit rupture. The b-values are significantly lower at the eastern end of the Izmit rupture where the Düzce mainshock occurred. These low b-values at depth are correlated with low postseismic slip rate and positive Coloumb stress change along KDC. Since low b-values are hypothesized with high stress levels, we propose that at the depth of the Düzce hypocenter (12.5 km), earthquakes are triggered at higher stresses compared to shallower crustal earthquake. The decrease in b-value from the Karadere segment towards the Düzce Basin supports this low b-value high stress hypothesis at the eastern end of the Izmit rupture. Consequently, we detect three asperity regions which are correlated with high b-value zones along the Izmit rupture. According to aftershock distribution the half of the Düzce fault segment was active before the 12 November 1999 Düzce mainshock. This part is correlated with low b-values which mean high stress concentration in the Düzce Basin. This high density aftershock activity presumably helped to trigger the Düzce event (M_w = 7.2) after the Izmit M_w 7.4 mainshock.     

Late Quaternary activity and dextral strike-slip movement on the Karakax Fault Zone, northwest Tibet

Field observations and interpretations of satellite images reveal that the westernmost segment of the Altyn Tagh Fault (called Karakax Fault Zone) striking WNW located in the northwestern margin of the Tibetan Plateau has distinctive geomorphic and tectonic features indicative of right-lateral strike-slip fault in the Late Quaternary. South-flowing gullies and N–S-trending ridges are systematically deflected and offset by up to ~ 1250 m, and Late Pleistocene–Holocene alluvial fans and small gullies that incise south-sloping fans record dextral offset up to ~ 150 m along the fault zone. Fault scarps developed on alluvial fans vary in height from 1 to 24 m. Riedel composite fabrics of foliated cataclastic rocks including cataclasite and fault gouge developed in the shear zone indicate a principal right-lateral shear sense with a thrust component. Based on offset Late Quaternary alluvial fans, ¹⁴C ages and composite fabrics of cataclastic fault rocks, it is inferred that the average right-lateral strike-slip rate along the Karakax Fault Zone is ~ 9 mm/a in the Late Quaternary, with a vertical component of ~ 2 mm/a, and that a M 7.5 morphogenic earthquake occurred along this fault in 1902. We suggest that right-lateral slip in the Late Quaternary along the WNW-trending Karakax Fault Zone is caused by escape tectonics that accommodate north–south shortening of the western Tibetan Plateau due to ongoing northward penetration of the Indian plate into the Eurasian plate.     

Fluid-pressure controlled soft-bed deformation sequence beneath the surging Breiðamerkurjökull (Iceland, Little Ice Age)

The general subject of this paper is subglacial deformation beneath Breiðamerkurjökull, a surging Icelandic glacier. More specifically it discusses the evolution and the role of fluid pressure on the behaviour of subglacial sediments during deformation. During Little Ice Age maximum, the two outcrops studied, North Jökulsarlon (N-Jk) and Brennhola-Alda (BA), were located at 2550 m and 550 m respectively from the front of the Breiðamerkurjökull. Sedimentological analysis at the forefield of the glacier shows thick, coarse glaciofluvial deposits interbedded with thin, fine-grained shallow lacustrine/swamp deposits, overlain by a deformed till unit at N-Jk. BA outcrop shows fine-grained shallow lacustrine/swamp deposits overlain by a deformed till unit. The sequence of deformation events from one outcrop to the other is similar. First, major thrust planes, which were rooted in shallow lacustrine/swamp deposits developed by glacially induced simple shear. Next, the thrusts were folded, indicating the deformation of hydroplastic sediment assisted by moderate fluid pressure. Then clastic dyke swarms crosscut the sedimentary succession, proving that fluid overpressure caused hydrofracturing associated with fluidisation. Finally, as water escaped from the glacier bed, fluid pressure dropped, and normal faulting occurred in brittle-state subglacial sediments. Fluid-pressure variations are related to glacier dynamics. They control the deformation sequence by modifying subglacial rheological behaviour and the nature of the subglacial tectonism.     

Kinematic analysis and palaeoseismology of the Edremit Fault Zone: evidence for past earthquakes in the southern branch of the North Anatolian Fault Zone,Biga Peninsula,NW Turkey

The Edremit Fault Zone (EFZ) forms one of the southern segments of the North Anatolian Fault Zone (NAFZ) at the northern margin of the Edremit Gulf (Biga Peninsula, South Marmara Region, Turkey). Stratigraphic, structural and kinematic results indicate that basinward younging of the fault zone, in terms of a rolling-hinge mechanism, has resulted in at least three discrete Miocene to Holocene deformational phases: the oldest one (Phase 1) directly related to the inactive Kazda? Detachment Fault, which was formed under N–S trending pure extension; Phase 2 is characterised by a strike-slip stress condition, probably related to the progression of the NAFZ towards the Edremit area in the Plio–Quaternary; and Phase 3 is represented by the high-angle normal faulting, which is directly interrelated with the last movement of the EFZ. Our palaeoseismic studies on the EFZ revealed the occurrence of three past surface rupture events; the first one occurred before 13178 BC, a penultimate event that may correspond to either the 160 AD or 253 AD historical earthquakes, and the youngest one can be associated with the 6 October 1944 earthquake (M_w = 6.8). These palaeoseismic data indicate that there is no systematic earthquake recurrence period on the EFZ.     

Geometry of the fault zone of the 2003 Ms = 7.5 Chuya earthquake and associated stress fields, Gorny Altai

The co-seismic deformations produced during the September 27, 2003 Chuya earthquake (Ms = 7.5) that affected the Gorny Altai, Russia, are described and discussed along a 30 km long segment. The co-seismic deformations have manifested themselves both in unconsolidated sediments as R- and R′-shears, extension fractures and contraction structures, and in bedrock as the reactivation of preexisting schistosity zones and individual fractures, as well as development of new ruptures and coarse crushing zones. It has been established that the pattern of earthquake ruptures represents a typical fault zone trending NW–SE with a width reaching 4–5 km and a dextral strike–slip kinematics. The initial stress field that produced the whole structural pattern of co-seismic deformations during the Chuya earthquake, is associated with a transcurrent regime with a NNW–SSE, almost N–S, trending of compressional stress axis (σ₁), and a ENE–WSW, almost E–W, trending of tensional stress axis (σ₃). The state of stress in the newly-formed fault zone is relatively uniform. The local stress variations are expressed in insignificant deviation of σ₁ from N–S to NW–SE or NE–SW, in short-term fluctuations of relative stress values in keeping their spatial orientations, or in a local increase of the plunge angle of the σ₁. The geometry of the fault zone associated with the Chuya earthquake has been compared with the mechanical model of fracturing in large continental fault zones with dextral strike–slip kinematics. It is apparent that the observed fracture pattern corresponds to the late disjunctive stage of faulting when the master fault is not fully developed but its segments are already clearly defined. It has been shown that fracturing in widely different rocks follows the common laws of the deformation of solid bodies, even close to the Earth surface, and with high rates of movements.     

Holocene activity of the Scilla Fault, Southern Calabria: Insights from coastal morphological and structural investigations

Integration of on-land and offshore geomorphological and structural investigations coupled to extensive radiometric dating of co-seismically uplifted Holocene beaches allows characterization of the geometry, kinematics and seismotectonics of the Scilla Fault, which borders the eastern side of the Messina Strait in Calabria, Southern Italy. This region has been struck by destructive historical earthquakes, but knowledge of geologically-based source parameters for active faults is relatively poor, particularly for those running mostly offshore, as the Scilla Fault does. The  30 km-long normal fault may be divided into three segments of  10 km individual length, with the central and southern segments split in at least two strands. The central and northern segments are submerged, and in this area marine geophysical data indicate a youthful morphology and locally evidence for active faulting. The on-land strand of the western segment displaces marine terraces of the last interglacial (124 to 83 ka), but seismic reflection profiles suggest a full Quaternary activity. Structural data collected on bedrock faults exposed along the on-land segment provide evidence for normal slip and  NW-SE extension, which is consistent with focal mechanisms of large earthquakes and GPS velocity fields in the region. Detailed mapping of raised Holocene marine deposits exposed at the coastline straddling of the northern and central segments supplies evidence for two co-seismic displacements at  1.9 and  3.5 ka, and a possible previous event at  5 ka. Co-seismic displacements show a consistent site value and pattern of along-strike variation, suggestive of characteristic-type behaviour for the fault. The  1.5–2.0 m average co-seismic slips during these events document M_e  6.9–7.0 earthquakes with  1.6–1.7 ka recurrence time. Because hanging-wall subsidence cannot be included into slip magnitude computation, these slips reflect footwall uplift, and represent minimum average estimates. The palaeoseismological record based on the palaeo-shorelines suggests that the last rupture on the Scilla Fault during the February 6, 1783 M_w = 5.9–6.3 earthquake was at the expected time but it may have not entirely released the loaded stress since the last great event at  1.9 ka. Comparison of the estimated co-seismic extension rate based on the Holocene shoreline record with available GPS velocities indicates that the Scilla Fault accounts for at least  15–20% of the contemporary geodetic extension across the Messina Strait.     

Trenching exposures of the surface rupture of 2008 Mw 7.9 Wenchuan earthquake,China: Implications for coseismic deformation and paleoseismology along the Central Longmen Shan thrust fault

The May 12, 2008, Mw 7.9 Wenchuan earthquake was induced by failure of two of the major faults of the Longmen Shan thrust fault zone along the eastern margin of Tibet Plateau. Our study focused on trenches across the Yingxiu–Bichuan fault, the central fault in the Longmen Shan belt that has a coseismic surface break of more than 200 km long. Trenching excavation across the 2008 earthquake rupture on three representative sites reveals the styles and amounts of the deformation and paleoseismicity along the Longmen Shan fault. Styles of coseismic deformation along the 2008 earthquake rupture at these three sites represent three models of deformation along a thrust fault. Two of the three trench exposures reveal one pre-2008 earthquake event, which is coincident with the pre-existing scarps. Based on the observation of exposed stratigraphy and structures in the trenches and the geomorphic expressions on ground surface, we interpret the 2008 earthquake as a characteristic earthquake along this fault. The interval of reoccurrence of large earthquake events on the Central Longmen Shan fault (the Yingxiu–Beichuan fault) can be inferred to be about 11,000 years according to ¹⁴C and OSL dating. The amounts of the vertical displacement and shortening across the surface rupture during the 2008 earthquake are determined to be 1.0–2.8 m and 0.15–1.32 m, respectively. The shortening rate and uplift rate are then estimated to be 0.09–0.12 mm/yr and 0.18–0.2 mm/yr, respectively. It is indicated that the deformation is absorbed mainly not by shortening, but by uplift along the rupture during the 2008 earthquake.     

Thermal maturity of a fold–thrust belt based on vitrinite reflectance analysis in the Western Foothills complex, western Taiwan

Burial depth, cumulative displacement, and peak temperature of frictional heat of a fault system are estimated by thermal analysis in the fold–thrust belt of the Western Foothills complex, western Taiwan based on the vitrinite reflectance technique. The regional thermal structure across the complex reveals that the rocks were exposed to maximum temperatures ranging from 100 °C to 180 °C, which corresponds to a burial depth of 3.7–6.7 km. A large thermal difference of 90 °C were observed at the Shuilikeng fault which make the eastern boundary of the fold–thrust belt where it is in contact with metamorphic rock of Hsuehshan Range. The large thermal difference corresponds to cumulative displacements on the Shuilikeng fault estimated to be in the range of 5.2–6.9 km. However, thermal differences in across the Shuangtung and Chelungpu faults cannot be determined apparently due to small vertical offsets. The large displacement observed across the Shuilikeng fault is absent at the other faults which are interpreted to be younger faults within the piggyback thrust system. Localized high temperatures adjacent to fault zones were observed in core samples penetrating the Chelungpu fault. Three major fracture zones were observed at core lengths of 225 m, 330 m, and 405 m and the two lower zones which comprise dark gray narrow shear zones. A value of vitrinite reflectance of 1.8%, higher than the background value of 0.8%, is limited at a narrow shear zone of 1 cm thickness at the fracture zone at 330 m. The estimated peak temperature in the range of 550–680 °C in the shear zone is far higher than the background temperature of 130 °C, and it is interpreted as due to frictional heating during seismic faulting.     

Geochronological framework and Pb, Sr isotope geochemistry of the Qingchengzi Pb–Zn–Ag–Au orefield, Northeastern China

The Qingchengzi orefield in northeastern China, is a concentration of several Pb–Zn, Ag, and Au ore deposits. A combination of geochronological and Pb, Sr isotopic investigations was conducted. Zircon SHRIMP U–Pb ages of 225.3 ± 1.8 Ma and 184.5 ± 1.6 Ma were obtained for the Xinling and Yaojiagou granites, respectively. By step-dissolution Rb–Sr dating, ages of 221 ± 12 Ma and 138.7 ± 4.1 Ma were obtained for the sphalerite of the Zhenzigou Zn–Pb deposit and pyrargyrite of the Ag ore in the Gaojiabaozi Ag deposit, respectively. Pb isotopic ratios of the Ag ore at Gaojiabaozi (²⁰⁶Pb/²⁰⁴Pb = 18.38 to 18.53) are higher than those of the Pb–Zn ores (²⁰⁶Pb/²⁰⁴Pb = 17.66 to 17.96; Chen et al. [Chen, J.F., Yu, G., Xue, C.J., Qian, H., He, J.F., Xing, Z., Zhang, X., 2005. Pb isotope geochemistry of lead, zinc, gold and silver deposit clustered region, Liaodong rift zone, northeastern China. Science in China Series D 48, 467–476.]). Triassic granites show low Pb isotopic ratios (²⁰⁶Pb/²⁰⁴Pb = 17.12 to 17.41, ²⁰⁷Pb/²⁰⁴Pb = 15.47 to 15.54, ²⁰⁸Pb/²⁰⁴Pb = 37.51 to 37.89) and metamorphic rocks of the Liaohe Group have high ratios (²⁰⁶Pb/²⁰⁴Pb = 18.20 to 24.28 and 18.32 to 20.06, ²⁰⁷Pb/²⁰⁴Pb = 15.69 to 16.44 and 15.66 to 15.98, ²⁰⁸Pb/²⁰⁴Pb = 37.29 to 38.61 and 38.69 to 40.00 for the marble of the Dashiqiao Formation and schist of the Gaixian Formation, respectively).Magmatic activities at Qingchengzi and in adjacent regions took place in three stages, and each contained several magmatic pulses: ca. 220 to 225 Ma and 211 to 216 Ma in the Triassic; 179 to 185 Ma, 163 to 168 Ma, 155 Ma and 149 Ma in the Jurassic, as well as ca. 140 to 130 Ma in the Early Cretaceous. The Triassic magmatism was part of the Triassic magmatic belt along the northern margin of the North China Craton produced in a post-collisional extensional setting, and granites in it formed by crustal melting induced by mantle magma. The Jurassic and Early Cretaceous magmatism was related to the lithospheric delamination in eastern China. The Triassic is the most important metallogenic stage at Qingchengzi. The Pb–Zn deposits, the Pb–Zn–Ag ore at Gaojiabaozi, and the gold deposits were all formed in this stage. They are temporally and spatially associated with the Triassic magmatic activity. Mineralization is very weak in the Jurassic. Ag ore at Gaojiabaozi was formed in the Early Cretaceous, which is suggested by the young Rb–Sr isochron age, field relations, and significantly different Pb isotopic ratios between the Pb–Zn–Ag and Ag ores. Pb isotopic compositions of the Pb–Zn ores suggest binary mixing for the source of the deposits. The magmatic end-member is the Triassic granites and the other metamorphic rocks of the Liaohe Group. Slightly different proportions of the two end-members, or an involvement of materials from hidden Cretaceous granites with slightly different Pb isotopic ratios, is postulated to interpret the difference of Pb isotopic compositions between the Pb–Zn–(Ag) and Ag ores. Sr isotopic ratios support this conclusion. At the western part of the Qingchengzi orefield, hydrothermal fluid driven by the heat provided by the now exposed Triassic granites deposited ore-forming materials in the low and middle horizons of the marbles of the Dashiqiao Formation near the intrusions to form mesothermal Zn–Pb deposits. In the eastern part, hydrothermal fluids associated with deep, hidden Triassic intrusions moved upward along a regional fault over a long distance and then deposited the ore-forming materials to form epithermal Au and Pb–Zn–Ag ores. Young magmatic activities are all represented by dykes across the entire orefield, suggesting that the corresponding main intrusion bodies are situated in the deep part of the crust. Among these, only intrusions with age of ca. 140 Ma might have released sufficient amounts of fluid to be responsible for the formation of the Ag ore at Gaojiabaozi.Our age results support previous conclusions that sphalerite can provide a reliable Rb–Sr age as long as the fluid inclusion phase is effectively separated from the “sulfide” phase. Our work suggests that the separation can be achieved by a step-resolution technique. Moreover, we suggest that pyrargyrite is a promising mineral for Rb–Sr isochron dating.     

Paleomagnetism of the Fort Knox Stock, Alaska, and rotation of the Yukon–Tanana terrane after 92.5 Ma

The 92.5 Ma Fort Knox granodiorite stock, near the western end of the Fairbanks Belt in the Yukon–Tanana terrane (YTT) of central Alaska, hosts a world-class gold mine. The stock has been analysed paleomagnetically using thermal and alternating-field step demagnetization and isothermal remanence methods. This pluton retains a primary thermoremanent magnetization at 18 sites (232 specimens) that resides mainly in single-to pseudosingle-domain magnetite with a direction of D = 228.8°, I = 84.3° (N = 18, k = 130, α₉₅ = 3.0°), giving a paleopole at 56.5°N, 197.1°E (dp = 5.9°, dm = 5.8°). The pluton's host rock, the Fairbanks schist, does not retain a stable coherent remanence. Relative to the North American craton, the stock's paleoinclination indicates that the Fairbanks Belt has undergone nonsignificant poleward (northwesterly) translation of 25 ± 750 km only. Analysed in concert with the few available paleoinclinations available for the YTT in Yukon, the paleoinclination suggests further that the YTT has undergone only  250 to 450 km of dextral displacement along the Tintina fault in the past  100 Ma and, therefore, is parautocthonous since the mid-Cretaceous. The stock's paleodeclination records 121 ± 35° of counterclockwise rotation relative to the North American craton. Consideration of models published for Alaska's tectonic evolution suggests that this paleodeclination discordance is caused by rotations associated with the opening of the Canada Basin, with dextral displacement on the Tintina fault, and with development of the western Alaskan orocline. Thus the paleomagnetic results for the Fort Knox stock support a thin-skin tectonic model for the accretion of the YTT and Intermontane Belt terranes to the northern Cordillera.     

Structural and stratigraphical constraints on the kinematics history of the Southern Tan–Lu Fault Zone during the Mesozoic Anhui Province, China

The Tan–Lu Fault Zone (TLFZ) extends in a NNE–SSW direction for more than 2000 km in Eastern China. It has been considered either as a major sinistral strike-slip fault, as a suture zone or as a normal fault. We have conducted a structural analysis of the southern segment of this fault zone (STLFZ) in the Anhui Province. The ages (Triassic to Palaeocene) of the formations affected by the faults have been re-appraised taking into account recent stratigraphical studies to better constraint the ages of the successive stages of the kinematics of the STLFZ. Subsequently, the kinematics of the faults is presented in terms of strain/stress fields by inversion of the striated fault set data. Finally, the data are discussed in the light of the results obtained by previous workers.We propose the following history of the STLFZ kinematics during the Mesozoic. At the time of collision, a  NNE orientated Tan–Lu margin probably connected two margins located north of the Dabie and Sulu collision belts. During the Middle–Late Triassic, the SCB has been obliquely subducted below the NCB along this margin which has acted as a compressional transfer zone between the Dabie and Sulu continental subduction zones. The STLFZ has been initiated during the Early Jurassic and has acted as a sinistral transform fault during the Jurassic, following which the NCB/SCB collision stopped. A  NW-trending extension related to metamorphic domes was active during the basal Early Cretaceous ( 135–130 Ma); it has been followed by a NW–SE compression and a NE–SW tension during the middle–late Early Cretaceous ( 127 to  105 Ma, possibly  95 Ma); at that time the TLFZ was a sinistral transcurrent fault within the eastern part of the Asian continent. During the Late Cretaceous–Palaeocene, the STLFZ was a normal fault zone under a WNW–ESE tension.