两层流体中矩形箱浮体的附加质量和阻尼系数

研究了两层流体中矩形箱浮体的辐射问题。基于特征函数匹配理论,针对矩形箱浮体的三种振荡运动模式(横荡、垂荡和横摇),建立两层流体中矩形箱浮体辐射势的求解方法,导出矩形箱浮体附加质量和阻尼系数的计算公式。对所建立的求解模型进行了数值计算分析,结果表明在矩形箱浮体的某个振荡频率范围内,流体的分层效应对其附加质量和阻尼系数有显著影响的。     

筏式波浪能发电装置浮体水动力相互作用与能量俘获研究

基于三维势流理论,建立筏式波浪发电装置多浮体水动力模型。利用AQWA水动力软件研究多浮体水动力相互作用对发电装置浮体单元水动力系数的影响;将能量转换系统等效成刚度-阻尼模型后,对其进行不规则波时域模拟,对比分析方向谱和频率谱波浪模型对波浪发电装置能量吸收的影响。结果表明:浮体之间的水动力相互作用对浮体单元纵荡方向上的附加质量与辐射阻尼系数有明显的影响,对垂荡和纵摇方向上的水动力系数影响较小;不同的波浪模型下,能量俘获功率有着较大的差别,特别是在迎浪状态下。     

波浪作用下铰接式层合浮体的水弹性响应研究

在工程设计中,通常采用模块化方式制造超大型浮式结构物,将巨大的单体结构分割成多个较小模块,后期通过合适的连接器拼装形成。为了明确多模块超大浮体在波浪作用下的水弹性响应,以两个相邻层合浮体（高刚度面板和低密度芯材）为研究对象,建立波浪作用下铰接层合浮体水弹性响应的高阶势流模型。采用匹配特征函数展开法求解流体运动的速度势,探讨了铰接处弹簧刚度对浮体的反射系数、透射系数、挠度、弯矩和剪力的影响规律。研究结果表明：迎浪侧浮体的存在可以有效降低背浪侧浮体的挠度、弯矩和剪力幅值;与垂直弹簧相比,扭转弹簧刚度的增加可以更加有效抑制铰接层合浮体的水弹性响应;当扭转弹簧刚度大于一定值时,继续增大弹簧刚度对浮体的动力响应不产生影响。     

新模块化单桩缓冲系泊浮式集成结构系统研究

为配合我国南海重要岛礁陆域拓展及海洋资源开发,提出了一种基于新型单桩缓冲系泊与波浪能装置(WEC)集成的具有潮汐自适应特性的模块化浮体结构系统。基于三维势流理论,综合考虑浮体模块与单桩缓冲结构的相对运动及相关波浪能装置的机械耦合机理,重点研究了新型单模块浮式结构系统在典型海况下的动力响应特征,获得了单桩缓冲系泊系统的初步优化设计参数,并对极端海况进行安全校核,提出了优化自存策略。数值结果表明,此带有波浪能装置的新型单桩缓冲系泊系统,不仅可以有效地降低浮体模块的运动响应幅值并改善平台舒适度,还可以获得可观的发电量,而且在极端海况下,可以通过调整阻尼装置系统来稳定浮体模块的运动。     

浮式两级缓冲防撞系统及浮体结构构型研究

以浮式两级缓冲防撞系统为研究对象,介绍其工作原理,利用动力学分析软件LS-DYNA构建了碰撞模型并进行了仿真计算,依据仿真结果完成了以阻尼索组与浮体结构构型为主要内容的防撞系统设计。研究确定了阻尼索组的布置位置、材料及数量,为浮体内部结构构型设计了7种比选方案,分别对5 000 t船舶撞击浮体前梁和侧梁的动态过程进行了仿真分析,对比了不同方案及不同板梁厚度下的接触力。研究结果表明:浮体内部构造若选用板梁厚度12 mm的方案6设计,则碰撞发生时浮体前梁和侧梁分别可以稳定地提供10.4 MN和7.9 MN的均值力,以及11.5 MN和8.9 MN的峰值力,设计浮体能够满足整体刚度要求,防撞系统符合双保护原则。防撞系统及浮体结构构型设计为下一步全面开展船舶撞击防撞系统后的动力学响应分析奠定了基础。     

深水悬链锚泊线粘性阻尼计算

深水悬链锚泊线既为上部浮体运动提供恢复力,同时也提供阻尼力,其中阻尼力主要是由于上部浮体运动牵动悬链锚泊线局部振动和整体运动耗散能量而形成的拖曳粘性阻尼力.利用单根锚泊线由于上部浮体运动而吸收的能量来计算锚泊线的拖曳粘性阻尼.锚泊线和海床之间的接触作用基于刚性海床假定,利用Morrison公式计算锚泊线的惯性力和拖曳力荷载.用有限元方法进行非线性时域动力分析,分别计算静水条件和考虑流速分布两种工况下,上部浮体发生慢漂运动、波频运动以及两者组合运动时的锚泊线动力响应,比较不同工况下锚泊线的最大张力和粘性阻尼.     

浮体自由衰减运动阻尼识别方法误差分析

讨论了使用Froude法和Faltinsen法识别线性和非线性阻尼系数时的系统误差。通过回顾两种方法的推导过程,论证了方法的内在假设,并量化两种方法的系统误差。为减少识别过程误差,文中提出了直接积分法,并依据数值与试验数据,讨论了3种识别方法识别结果。结果表明,Froude法相比于Faltinsen法能更好地预报线性和非线性阻尼系数。对于低阻尼浮体问题,Froude法和Faltinsen法可以给出相对准确的预测,而对于强阻尼浮体问题,Froude法与Faltinsen法在确定的线性和非线性阻尼系数中会给出大于5%的系统误差,而直接积分法展示了较高的识别精度。     

浮体间距对多浮体系统水动力系数的影响

根据三维线性势流理论，采用格林函数法，对多浮体系统的水动力系数进行了数值分析。数值算例中给出了在固定波频下水动力系数与浮体间相对位置关系曲线。水动力系数的变化幅度随着浮体间距离增大而变小。随着浮体间距的变化，水动力系数极值的出现具有明显的规律，相邻的极大值(或极小值)的间距为半个波长或一个波长。     

点吸收波浪能转换装置的非线性动力学分析

点吸收式波浪能转换系统是最有效的波浪能利用装置之一,为提高能量利用性能该装置中的能量输出系统(Power Take-Off,简称为PTO)常设计有非线性环节。本文考虑了PTO中的非线性阻尼和非线性刚度等因素,对点吸收式波浪能转换装置的动力学进行了研究。根据流体动力学软件获取了浮体在波浪作用下的水动力参数,建立了PTO中包含中非线性阻尼和非线性刚度的动力学方程,采用Runge-Kutta法对其时域响应进行了求解,并分析了波幅和不同非线性刚度系数对能量俘获宽度的影响,研究表明选择合理的立方刚度非线性系数可以增加能量俘获宽度,提高能量利用率。     

10 MW半潜浮式风机阻尼结构研究

为了有效控制半潜浮式风机垂荡运动,本文研究了浮式风机的阻尼结构,可提升浮体垂荡运动阻尼性能。以10 MW浮式风机为例,通过计算流体力学（CFD）的方法,计算分析不同型式阻尼结构的阻尼性能,探讨阻尼结构不同方案对于浮式风机基础阻尼性能的影响,通过涡量图分析阻尼特性的变化规律。计算结果表明：增加边锋、U型及倒U型结构、开孔...     

Motion stability measurements of a submarine-towed extremely low-frequency receiving platform

The design and ultimate performance of an extremely low-frequency (ELF) superconducting quantum interference device (SQUID) antenna that is mounted in a submarine-towed buoy depends critically on the motion spectrum of the buoy. Motion spectrum measurements from near dc to 100 Hz were conducted on a hydrodynamically stabilized buoy while being towed in the 650-m towing basin of the David Taylor Naval Ship Research and Development Center, Carderock, MD. The spectra show that the angular motion of the buoy can be held to4 times 10^{-6}rad/sqrt{Hz}or less within the ELF receiver bandwidth of 30-130 Hz, as long as properly streamlined fairings are used on the hydrofoil trailing edges in order to prevent oscillations from vortex shedding. Low-frequency oscillations of the buoy were3 times 10^{-3}rad/sqrt{Hz}or less for frequencies down to 0.025 Hz. This performance of the buoy is sufficient to permit it to serve as a towed platform for the NRL prototype SQUID receiver.     

Hydrodynamic Analysis and Power Conversion for Point Absorber WEC with Two Degrees of Freedom Using CFD

Point absorber wave energy device with multiple degrees of freedom (DOF) is assumed to have a better absorption ability of mechanical energy from ocean waves. In this paper, a coaxial symmetric articulated point absorber wave energy converter with two degrees of freedom is presented. The mechanical equations of the oscillation buoy with power take-off mechanism (PTO) in regular waves are established. The three-dimensional numerical wave tank is built in consideration of the buoy motion based upon the CFD method. The appropriate simulation elements are selected for the buoy and wave parameters. The feasibility of the CFD method is verified through the contrast between the numerical simulation results of typical wave conditions and test results. In such case, the buoy with single DOF of heave, pitch and their coupling motion considering free (no PTO damping) and damped oscillations in regular waves are simulated by using the verified CFD method respectively. The hydrodynamic and wave energy conversion characteristics with typical wave conditions are analyzed. The numerical results show that the heave and pitch can affect each other in the buoy coupling motion, hydrodynamic loads, wave energy absorption and flow field. The total capture width ratio with two coupled DOF motion is higher than that with a single DOF motion. The wave energy conversion of a certain DOF motion may be higher than that of the single certain DOF motion even though the wave is at the resonance period. When the wave periods are high enough, the interaction between the coupled DOF motions can be neglected.     

波浪发电装置浮筒的水动力特性及参数研究

针对我国波浪发电的发展现状,介绍了“海蛇”波浪发电装置的发电原理,并应用OrcaFlex 软件建立了装置的水动力数值模型,研究了“海蛇”装置浮筒的水动力特性.根据“海蛇”装置的结构特点,通过对活塞运动的时程曲线进行傅里叶变换,给出此装置一级转化总势能计算的简易方法.另外,通过改变浮筒的直径和长度,以装置的效率/体积比作为衡量系统经济性的指标,研究浮筒几何参数对装置一级能量转化效率的影响.结果表明,装置一级能量转化效率随浮筒长度和直径增加而变大,进一步分析表明,适当增加浮筒长度比增大直径更具经济效益.装置的效率/体积比随着浮筒直径增加存在先增加后减少的拐点,这可以为“海蛇”的初始设计提供一定的理论依据.     

多圆柱体浮标的横摇性能分析

横摇性能是评价浮标在海上运动稳定性的重要参数之一,它直接影响浮标在海中漂浮的姿态和对天线束宽的要求,这对于卫星通讯浮标尤为重要,因此大多数的浮标主体外形为横摇性能较好的球体,但是球体浮标不适合被无人机携带。本文设计了一种用于空投横摇性能较好的圆柱体浮标,通过研究圆柱体浮标尺寸形状与横摇性能的关系,分析不同尺寸下圆柱体浮标横摇性能随直径与高度的比值(径高比)的变化趋势。同时,分析了同种海况下球体浮标横摇性能随直径的变化趋势作为对比,发现圆柱体浮标的横摇放大因子随径高比增大而先增大后减小,从而确定多圆柱体浮标的设计方案,数值模拟该形状浮标在5级海况下的横摇性能,计算得到稳定状态下的最大横摇角度小于20°。另外进行了海上试验,浮标在有效波高为1 m的海浪中的最大横摇倾角约为16°,符合设计要求。     

A modified linear analysis of a wave-energy conversion buoy

The analysis of a pneumatic-type wave-energy conversion buoy is developed assuming independence of the buoy heaving motion and the motion of the water column within the center pipe. Results of the analysis are then compared with experimental data in a study of the relative air velocity within the turbine passage. The results compare very well. The effect of the variation of the center pipe length is found to be significant for periods about the surge chamber resonance but is negligible in the neighborhood of the heaving resonance period. Further, the theory is applied to a prototype buoy study of the U.S. Coast Guard, and a dimensionless design curve is developed from the results of the prototype analysis.     

定位浮标在波浪中的动态响应

定位浮标是为满足水下蛙人部队定位要求而设计的。定位浮标的升沉和横摇运动对海水中换能器阵的水声定位精度影响较大，而使定位浮标产生这两种振荡的主要激励源是波浪。在不考虑流和风对浮标作用的前提下，以规则波作为激励源，研究了定位浮标在波浪激励下的两种运动模型，然后用计算机对横摇和升沉运动模型进行了仿真，最后从运动模型出发提出了减少浮标振幅的有效办法，这对定位浮标结构设计有重要意义。     

Investigation on the Oscillating Buoy Wave Power Device

An oscillating buoy wave power device (OD) is a device extracting wave power by an oscillating buoy. Being excited by waves, the buoy heaves up and down to convert wave energy into electricity by means of a mechanical or hydraulic device. Compared with an Oscillating Water Column (OWC) wave power device, the OD has the same capture vvidth ratio as the OWC does, but much higher secondary conversion efficiency. Moreover, the chamber of the OWC, which is the most expensive and difficult part to be built, is not necessary for the OD, so it is easier to construct an OD. In this paper, a nu-merical calculation is conducted for an optimal design of the OD firstly, then a model of the device is built and, a model test is carried out in a wave tank. The results show that the total efficiency of the OD is much higher than that of the OWC and that the OD is a promising wave power device.     

基于地磁与红外双模探测的海洋浮标预警系统设计

设计了一种基于地磁检测与红外感应相结合、可对浮标周围异常目标进行探测和预警的控制系统。系统采用芯片级的微型磁感线圈,以及高集成度、低功耗的数据采集与总线技术,通过探测船体磁性对地磁场的扰动,监测船舶对浮标的靠近;采用芯片级的热释电红外传感器,通过探测人体红外辐射,监测浮标在正常工作期间未知人员的入侵。系统的预警采用声光报警和图像远程传输相结合的方式,现场采集的图像数据经过压缩编码后通过无线数传电台发送至远程岸基监测站,实现海洋浮标的远程预警与现场取证功能。     

A single point mooring spar buoy for measuring ocean waves

We made and set a spar buoy in September 1975 at Tsuyazaki for the purpose of developing the buoy system to acquire the oceanographical data. Motions of the buoy were also measured in terms of three components of acceleration, roll, and pitch. The buoy was removed from the site in May 1978.A method of eliminating influence of the buoy motion on the measured wave data was invented and examined by using the field data. It was found that the influence of the buoy motion on the wave data was so small that the amount of correcting the motion was negligible. In addition wave data obtained at the buoy were compared with those obtained at the fixed type platform, which was built in 1974 to get the reference data of wind, waves and currents. The agreement was found to be good. The performance of the buoy was as good as intended. Thus, it was shown that the buoy so far developed could be used as the platform for oceanographic research such as measuring wind and waves with higher precision.