基于岩石物理模型的页岩储层裂缝属性及各向异性参数反演

针对富有机质页岩储层复杂的矿物组分与微观孔缝结构,本文提出基于岩石物理模型和改进粒子群算法的页岩储层裂缝属性及各向异性参数反演方法。应用自相容等效介质理论与Chapman多尺度孔隙理论建立裂缝型页岩双孔隙系统岩石物理模型。开发基于岩石物理模型的反演流程,引入模拟退火优化粒子群算法解决多参数同时反演问题,反演算法能够避免陷入局部极值且收敛速度快。将本文方法应用于四川盆地龙马溪组页岩气储层,反演得到的孔隙纵横比、裂缝密度等物性参数和各向异性参数与已有研究结果一致,能为页岩储层的评价提供多元化信息。     

Time-Dependent Behavior of Diabase and a Nonlinear Creep Model

Triaxial creep tests were performed on diabase specimens from the dam foundation of the Dagangshan hydropower station, and the typical characteristics of creep curves were analyzed. Based on the test results under different stress levels, a new nonlinear visco-elasto-plastic creep model with creep threshold and long-term strength was proposed by connecting an instantaneous elastic Hooke body, a visco-elasto-plastic Schiffman body, and a nonlinear visco-plastic body in series mode. By introducing the nonlinear visco-plastic component, this creep model can describe the typical creep behavior, which includes the primary creep stage, the secondary creep stage, and the tertiary creep stage. Three-dimensional creep equations under constant stress conditions were deduced. The yield approach index (YAI) was used as the criterion for the piecewise creep function to resolve the difficulty in determining the creep threshold value and the long-term strength. The expression of the visco-plastic component was derived in detail and the three-dimensional central difference form was given. An example was used to verify the credibility of the model. The creep parameters were identified, and the calculated curves were in good agreement with the experimental curves, indicating that the model is capable of replicating the physical processes.     

岩石蠕变模型研究进展及若干问题探讨

岩石蠕变是岩土工程变形失稳的主要原因之一。近年来蠕变研究正处于一个探索阶段,本文从四个方面综述了蠕变模型的研究进展。研究发现,在岩石蠕变的三个阶段中利用经典本构模型均很难描述加速蠕变阶段,研究者们通过新的元件或者改进的非线性黏弹塑性本构模型可以很好的模拟岩石蠕变实际曲线;基于损伤理论的岩石蠕变模型是近年来发展的主要方向,可以很好的解决岩石微观裂纹所带来的蠕变;随着岩石深部工程的发展,岩体受到周围实际环境下的影响是不可忽略的,从而研究含水量的变化与水力和其它应力耦合下的岩石蠕变也是今后的重点。最后指出,由于试验仪器的原因,高温高压和各向异性下的岩石蠕变模型研究进行的还不是很多,是今后岩石蠕变研究的难点。     

岩体演化的非线性动力学模型与稳定性分析

以时间序列为基础,应用支持向量机建立岩体演化的非线性动力学模型,依据Lyapunov指数给出最长可预报时间,并通过函数拟合、变量代换将其化为标准的尖点突变模型,利用突变理论对其进行稳定性分析。结果表明,该模型预测效果理想,并具有良好的推广能力。     

云母石英片岩蠕变模型参数选择研究

根据三轴蠕变试验曲线的特点,建立了云母石英片岩七元件线性黏弹塑性蠕变模型,采用最小二乘法对蠕变柔量时间曲线和应变时间蠕变曲线进行拟合确定蠕变模型参数,讨论了确定蠕变模型参数的影响因素及参数的合理性与可用性。结果表明：由于受到分级加载次数、初次加载应力值和加载时间的影响,两种曲线拟合确定的参数各不相同;云母石英片岩蠕变模型的非线性较明显;蠕变柔量时间曲线拟合确定的参数不予采用,应变时间蠕变曲线拟合确定的参数在各级应力水平下变化规律不明显;采用某种单一方法确定蠕变模型参数不够全面,建议采用综合辨识法,这样才能保证岩土工程中蠕变数值分析结果的正确合理性以及施工设计的安全可靠性。     

基于HPSO算法的岩石非定常蠕变本构模型辨识

复合微粒群优化(HPSO)是一类随机全局优化技术,具有搜索能力强、收敛速度快、搜索精度高的优点.针对岩石蠕变本构模型非定常参数的辨识问题,利用FLAC软件自带的fish语言实现了HPSO算法对非定常参数的辨识.该方法从非定常参数的随机值出发,以蠕变过程中试件变形的实验值与计算值的误差大小作为适应度函数来评价参数的品质,...     

卸荷工程岩体非线性模型的研究与应用

卸荷工程岩体与传统的加载岩体的力学条件有着本质的区别，其非线性特征更为明显，卸荷工程岩体的研究是一个崭新的领域，对卸荷岩体的工程地质特征、力学参数的确定、本构关系及卸荷岩体释放荷载的计算方面进行了初步的探讨。     

非等间距序列的灰色预测模型及其在岩石蠕变断裂中的应用

给出了非等间距序列的灰色预测模型，讨论了该模型的灰色预测平面和最优预测函数。最一将该模型应用于符合Ｋｅｌｖｉｎ模型的岩石材料的蠕变断裂研究，给出了应用实例，并验证了该方法的可行性。     

冻土三轴蠕变非线性数学模型研究

采用MTS-810液压伺服材料试验机, 对人工配制的冻黏土试件进行了三轴蠕变试验, 获得了冻黏土在复杂应力状态下的蠕变曲线. 结果表明: 冻土的蠕变变形具有较强的温度敏感性, 温度越高, 这种温度敏感性越强; 相同温度下, 荷载越大, 变形越大. 运用相关理论, 推导了冻黏土在复杂应力状态下的三轴蠕变非线性数学模型, 采用MATLAB软件的数据拟合功能得到了模型方程参数的数值, 模型参数与温度之间存在密切关系, 建立了二者之间的数学表达式. 冻土三轴蠕变非线性数学模型的曲线与试验曲线拟合精度较高, 建立的数学模型可以精确体现冻土的蠕变规律, 能够为实际冻土工程的变形发展预测提供有效的理论指导.     

Development of a Nonlinear Model for Soft Rock and its Applications

A phenomenological model has been developed for soft rock based on the results of a series of triaxial compression (TC) tests conducted on Kobe sandstone with a very high precision measurement. From the analysis and interpretation of the test results, it has been found that small strain Young’s modulus (E^e) was a function of the major principal stress. E^e for elastic strains of soft rock was assumed to be cross-anisotropic. A damage function has been used to derive the appropriate elastic Young’s modulus when subjected to shear loading. As the basic stress–strain relation, the relationship between the tangent modulus and the shear stress level was used. The differential form of which was subsequently integrated by a 4th order Runge–Kutta solver to obtain the stress–strain relation. The model of soft rock is based on an isotropic strain hardening elasto-plastic framework which takes into account the pressure sensitivity, cross-anisotropy, degradation of Young’s modulus with the degree of mobilized shear stress and the nonlinearity of the shear stress-shear strain relationship. Although the model was developed from the analysis of the TC tests results of Kobe sandstone, it was also applied to the other types of soft rock or stiff geomaterials. Plate loading tests were conducted at a level of 61 m below the ground level at the bottom of a large excavated shaft at four locations. Finally, the model was used to simulate the plate loading test results successfully. This model was successfully calibrated with Akashi sandstone and applied in the simulation for the settlement of Akashi-Kaikyo Bridge piers. The simulations were carried out for both drained and undrained condition by changing the Poisson’s ratio. The layering information beneath the foundations were used in the FEM simulation. The use of very accurate Young’s modulus from the field shear wave velocity test was the key to the successful simulation of the settlement under bridge pier foundations.     

基于正交试验设计的梧桐庄矿岩体力学参数反演

在岩土体力学问题的数值模拟研究中,力学参数选取正确与否直接影响模拟结果的准确性。本文在分析不同岩体力学参数确定方法基础上,以梧桐庄矿开采沉陷项目为背景,结合现场实测数据和相关理论成果,应用"数值模拟-正交设计"法,建立了一套确定岩体物理力学参数有效实用的方法。试验中以下沉系数为评价指标,选择围岩体4个基本力学参数弹性模量E(GPa)、泊松比μ、内摩擦角φ(°)、粘聚力c(k Pa)为反演因素,模拟计算各参数不同水平组合,通过对结果的极差与方差分析,得出各参数对下沉系数的影响显著性,再进行二次优化实验计算,综合分析确定一套优选参数组合。此方法使得参数合理化,模拟结果可以更真实的反映煤岩体实际采掘的变形移动情况。     

基于等效介质模型和频变AVO反演的裂缝储层参数估算方法

由于裂缝性油气藏具有突出的资源潜力和经济效益,利用地震方法对裂缝储层进行精细的定量描述逐渐成为勘探地球物理的关键任务之一。为了克服以往数据驱动类反演方法无法直接获得裂缝参数、而基于静态等效介质模型驱动的反演方法无法描述孔隙内部结构和流体信息的缺点,笔者提出一种基于动态等效介质模型的储层定量描述新方法。该方法通过频变AVO(amplitude variation with offset)理论建立目标函数并使用全局最优化算法反演裂缝参数。一维和二维模型测试证实,由于充分利用了反射系数频变响应对裂缝密度和时间尺度因子的敏感性,反演方法可以对裂缝储层实现有效描述。     

Compression Creep Characteristics and Creep Model Establishment of Gangue

How to describe the compression creep behavior of gangue is very essential for the design of gangue backfilling mining. In this paper, compression tests of two kinds of gangue are studied, finding that logarithmic function is suitable for describing its equal-time stress–strain relationship. Stress–strain–time relationship is proposed through modifying the Singh–Mitchell creep model based on the analysis of the test result, and this model can provide a design basis for gangue backfilling technology. Back analysis indicates that this model can basically describe the creep behavior of gangue with a few parameters that are easy to be determined. This research can provide a reference on the design of gangue backfilling mining, and on the subsidence value estimation.     

Study on Creep Characteristics and Constitutive Model for Thalam Rock Mass with Fracture in Tunnel

In the each loading stage, strain and creep strain occurs instantaneously on the axial and lateral of fractured. Instantaneous strain leads to the 80% overall specimen deformation. The axial strain is about 2–3 times larger than the lateral strain. Instantaneous strain completed time and deformations under each loading stage decrease when the loading time increases. With the increasing of loading, axial strain and lateral strain of fractured phyllite present the approximate linear curve growth change. With increasing of axial stress, the relationship between the lateral strain and axial strain transform from the linear increased trend to the index increased trend. With the increasing of moisture content, the axial deformation and lateral deformation of fractured phyllite increase. The curves of axial strain and lateral strain under soaked for 10 and 15 days condition are similar. The modified Burgers model can describe each creep stage of fractured phyllite which have high fitting precision, less fluctuation and high reliability. Therefore, modified Burgers model can provide an effective way to analyze the creep characteristics of fractured phyllite.     

多模式面波非线性反演

利用高频面波反演横波速度一直是浅地表地震工程研究的热点。为深入认识利用高频面波（瑞雷波和勒夫波）评价横波速度的能力,本文首先采取高阶交错网格有限差分法实现两层模型的瑞雷波和勒夫波数值模拟,并应用τ-p变换形成频散能量图。相比瑞雷波,不同模式的勒夫波频散能量很接近,这说明易于实现多模式勒夫波反演。然后利用线性映射实现广义模式识别这种非线性反演方法对含软弱夹层的四层模型的基模式、多模式瑞雷波和勒夫波的变厚度反演。若初始模型很拙劣,相比勒夫波,瑞雷波基模式反演不能重建地层中含有软弱夹层这一特征,瑞雷波多模式反演则可以重建这一特征;勒夫波基模式和多模式反演都可以重建这一特征。即使在地层的泊松比与估计值相差很大时,瑞雷波多模式反演仍能重建地层结构,但其频散曲线总是存在"模式接吻"现象,容易模式误判;而勒夫波反演则不用估计地层泊松比,也不存在"模式接吻"现象。一系列算例表明：高模式瑞雷波的加入会显著提高横波速度评价结果的精度;而高模式勒夫波的加入会令反演系统对半空间以上异常层的参数过于敏感,造成参数过度估计,但也会显著提升对半空间横波速度的评价能力。最后,应用本文方法实现了对实测勒夫波数据的分析。     

吹填粉砂土固结蠕变试验及模型

通过分析法向应力、干密度、土样尺寸对吹填粉砂土蠕变特性的影响,深入研究其固结蠕变特性。与Kelvin模型相比,采用Burgers体模型能够更合理地阐释吹填粉砂土的蠕变曲线;采用FLAC^3D方法可开展吹填土蠕变过程的三维数值模拟。结果表明：吹填粉砂具有一定的蠕变特性,并可用幂函数描述应力-应变、应变-时间的关系;干密度一定时,法向应力愈大,初始应变愈大,达到稳定的时间愈长;法向应力一定时,干密度越大,初始变形越小,最终稳定所需时间越短;大尺寸试样（Ф 200.0 mm× H200.0 mm）的瞬时变形与蠕变形率要比标准尺寸（Φ 61.8 mm×H 20.0 mm）大,稳定所需时间要长;此外,Burgers体模型模拟吹填粉砂土固结蠕变变形优于广义Kelvin模型并具有可行性。     

Model TRS-1 Measuring and Data Processing System for Rock and Soil Mechanical Parameters

Taking model TRS-1 system for measurements of rock and soil mechanical parameters and data processing as an example, in this paper, the principle and the method of choosing the transducers, the secondary instruments and the microcomputers are descrbied. The compsions , functions and main technical indes of the system are presented. The block diagram of the system are also described.     

TSR-1型岩土力学参数测量及数据处理系统

本文以TSR-1型岩土力学参数测量及数据处理系统为例,叙述岩土力学试验中,力学参数测量及数据处理时,传感器、二次仪表、计算机等的选择原则。本文还将叙述该系统的结构功能和主要技术指标。最后叙述该系统的程序。     

Creep Damage Characteristics of Soft Rock under Disturbance Loads

This article focuses on the process of rock creep damage and micro-damage evolution properties of gray green mudstone under impacting disturbance load conditions for the first time using the real time computerized tomography (CT) testing technique. The results indicate that axial load comes into limit strength neighborhood, rock micro-crack links into larger crack, creep rate increases in a short time, larger plastic deformation happens; this is called disturbance accelerating creep stage. When rock is within limit strength neighborhood, there occurs creep micro-damage under smaller disturbance load. When disturbance load is larger, rock directly enters into disturbance accelerating creep stage, failure occurs instantaneously. On the basis of experimental research, the CT scanning method was used to describe the creep micro-damage of soft rock, also helpful in the prediction of roadways' service life and evaluation of geotechnicai engineering stability.