The Australian Ska New Technology Demonstrator Program

I present a brief overview of the SKA projects conducted under the Australian Major National Research Facilities program, and describe the largest of these projects – the SKA New Technology Demonstrator. The goal of this project is to construct an SKA technology demonstrator which will explore and evaluate a number of SKA technologies in a remote radio-quiet environment, while also achieving a restricted set of key science goals. Infrastructure and access to back-end facilities will also be provided for other international SKA groups who wish to evaluate or demonstrate technologies, or conduct science experiments, in a remote, radio-quiet, environment.     

Alma and E-merlin Data Transmission Systems: Lessons for Ska

ALMA, EVLA and e-MERLIN use high data rate optical fibre links based on commercially available 10 Gbps opto-electronics. This paper describes the systems designed by NRAO and JBO staff to be used in ALMA and e-MERLIN. ALMA has a requirement for a 120 Gbps data rate per telescope, requiring the use of 12 lasers in the 1550 nm telecommunication band, with maximum link lengths around 20 km. e-MERLIN has a lower bandwidth and requires 30 Gbps links per telescope and therefore three lasers per telescope; however, the link lengths reach up to around 400 km, and amplification, de-dispersion and regeneration are required. Dense wavelength division multiplexing is used to avoid fibre management problems and save fibre costs. The design criteria and experience gained in these projects is very relevant to SKA as the proposed configuration of the antenna elements maps well to the link lengths used here. The chosen data rate will be a major cost driver.     

Australian research effort for the SKA

The next generation radio telescope being planned is the Square Kilometer Array (SKA): an international project which is currently in the research and development phase. Australia is one of the partner countries in the SKA consortium; here I describe some of the SKA research being undertaken in Australia. This revised version was published online in July 2006 with corrections to the Cover Date.     

基于分布式执行框架的低频射电干涉阵列成像管线优化

平方公里阵列(Square Kilometre Array,SKA)项目是建设全球最大射电望远镜的国际合作项目,其灵敏度和测量速度将比当前所有的射电望远镜都要高出一个数量级.连续谱巡天是SKA的主要观测模式之一,基于连续谱成像建立巡天区域的标准星图,将能为后续天文科学研究奠定重要基础.银河系与河外星系全天默奇森宽场阵列拓展巡天(GaLactic and Extragalactic All-sky Murchison Widefield Array survey eXtended,GLEAM-X)是2018—2020年利用SKA先导望远镜默奇森宽场阵列(Murchison Wide-field Array,MWA)二期拓展阵列开展的新的射电连续谱巡天项目,观测期间积累了大量的低频巡天观测数据.海量观测数据的自动化、大批量处理是SKA望远镜项目所面临的的最大挑战和难题之一,基于分布式执行框架的成像管线优化经验将有助于解决海量数据处理问题.详细介绍了GLEAM-X成像管线并对其进行整合和改进,在中国SKA区域中心原型机(China SKA Regional Centre Prototype,...     

Five-hundred-meter Aperture Spherical Telescope project

A Five hundred meter Aperture Spherical Telescope (FAST) is proposed to be built in the unique karst area of southwest China, and will act, in a sense, as a prototype for the Square Kilometer Array (SKA). It will be over twice as large as the Arecibo telescope coupled with much wider sky coverage. Some results from site surveys for such a SKA concept are briefly reported. Technically, FAST is not simply a copy of the existing Arecibo telescope but has rather a number of innovations. Firstly, the proposed main spherical reflector, by conforming to a paraboloid of revolution in real time through actuated active control, enables the realization of both wide bandwidth and full polarization capability while using standard feed design. Secondly, a feed support system which integrates optical, mechanical and electronic technologies will effectively reduce the cost of the support structure and control system. Pre-research on FAST has become a key project in the CAS. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dish Verification Antenna China for the SKA:design,verification and status

The Square Kilometre Array(SKA) will be the world’s largest synthesis radio telescope, which is designed to answer major scientific questions such as those relating to the cosmic origin and fundamental forces in the universe. With the SKA entering into the phase of pre-construction, more than 100 institutes in about 20 countries including China have been involved in the associated key technology development.The Dish Verification Antenna China(DVA-C) is a concept prototype which has been built to meet the requirements of the SKA’s scientific goals. It utilizes a unique skin-and-rib structure with single-piece panel reflectors. This paper presents details on the design and measured performances of DVA-C, as well as the preliminary observational results. Current applications of the DVA-C are also introduced.     

Design and development of the Advanced Technology Solar Telescope

Led by the National Solar Observatory, plans have been made to design and to develop the Advanced Technology Solar Telescope (ATST). The ATST will be a 4‐m general‐purpose solar telescope equipped with adaptive optics and versatile post‐focus instrumentation. Its main aim will be to achieve an angular resolution of 0.03 arcsec (20 km on the solar surface). The project and the telescope design are briefly described.     

A novel design for a giant Arecibo-type spherical radio telescope with an active main reflector

A novel design for a giant spherical radio telescope is proposed. Instead of a fixed spherical reflecting surface such as with the 305-m Arecibo telescope, the illuminated portion of the reflecting surface is made to fit a paraboloid of revolution in real time by active control. A simple feed can thus be used, enabling the realization of broad bandwidth and full polarization. The actual design utilizes a karst depression which gives a spherical surface of 300-m radius, having an opening of 500-m diameter. The illuminated aperture is chosen to be 300 m, and the focal ratio is 0.46–0.48. With this geometry and the simple feeding system, a giant telescope with large sky coverage can be achieved at low cost. When the illuminated aperture is limited to 70–100 m, the area trackable can be extended to about 10° above the horizon.     

Hopes and expectations with GREGOR

This contribution to the series of GREGOR inauguration articles addresses the history of the GREGOR telescope. It was obvious since a long time that the study of the atmospheric dynamics on the Sun needs telescopes with a large aperture. So the first plans to replace the 40 years old Gregory‐Coudé Telescope, with its 45 cm primary mirror, by a large, 1.5‐meter telescope date back to 1997. After a positive review of the project by the Deutsche Forschungsgemeinschaft in 2000, the large financial support started in 2000. Unfortunately, the new technology of the Cesic mirrors was not yet ripe to produce the large primary mirror with this light‐weight material. So, the project was much delayed. After recollecting for the reader several dates, I also go through some properties of GREGOR. I recall the aims of the project and discuss difficulties and ways to realise the intentions (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experiments on the dish verification antenna china for the SKA

The Square Kilometre Array (SKA) is expected to become the world’s most powerful radio telescope at meter and centimeter wavelength in the coming decades. The construction of SKA will be divided into two phases. The first phase (SKA1), scheduled for completion in 2023, will construct 10 % of the whole collecting area. The second phase (SKA2) will build the rest 90 % collecting area. The SKA1 consists of several types of arrays including SKA1-low and SKA1-mid. The latter is a dish array consisting of ~200 medium-size antennas. The integrated dish array in SKA2 will expand to 2500 dishes, spreading 3000 kilometers across the southern part of Africa. The demanding specifications and enormous number of the SKA dish raise challenges in the dish development such as mass production with high performance at low cost, quick installation and high reliability. Dish Verification Antenna China (DVA-C) was built as one of three initial prototypes. A novel single-piece panel reflector made of carbon fiber reinforced polymer (CFRP) was adopted. In this study, an L-band receiver is installed to make DVA-C a complete system for experiments on antenna performance test and preliminary observations. The performance of DVA-C including the system noise temperature, pointing accuracy, antenna pattern, and aperture efficiency has been tested. Preliminary observations such as pulsars and HI are then conducted, which indicates that the DVA-C can not only serve as an educational instrument and key technology test bed, but also be applied for scientific work such as pulsar timing, all-sky HI survey, multi-frequency monitoring of variable sources etc.     

射电望远镜的发展和前景

在近代科学技术发展的基础上诞生和成长起来的射电天文学已经走过了66年的历程,作为射电天文学主要探测工具的射电望远镜有了长足的进步,面临21世纪人类社会和自然科学技术包括天文学发展的挑战,射电望远镜及射电天文学将迈出新的步伐．从射电天文学和射电望远镜发展的关系、射电望远镜几个主要发展方向和目前水平、自90年代以来逐步勾画而明确起来的未来发展方向等方面阐明了射电望远镜的发展和前景,以作为我国发展新一代射电望远镜的参考．     

Cost-effective infrastructure in a multi-antenna telescope layout

The future Square Kilometre Array (SKA) radio telescope is an interferometer array that will use a variety of collector types, including approximately 2500 dishes distributed with separations up to a few thousand kilometres, and about 250 aperture array (AA) stations located within 200 km of the core. The data rates associated with each individual collector are vast: around 10 GBytes/s for each dish and 2 TBytes/s for an AA station. As each of these must be connected directly to a central correlator, designing a cost-effective cabling and trenching infrastructure presents a great engineering challenge. In this paper we discuss approaches to performing this optimisation. In graph theory, the concept of a minimum spanning tree (MST) is equivalent to finding the minimum total trench length joining a set of n arbitrary points in the plane. We have developed a set of algorithms which optimise the infrastructure of any given telescope layout iteratively, taking into consideration not only trenching but also cabling and jointing costs as well. Solutions for few example configurations of telescope layout are presented. We have found that these solutions depend significantly on the collectors’ output data rates. When compared to a “traditional” MST-based approach which minimises trenching costs only, our algorithms can further reduce total costs by up to 15–20%. This can influence greatly the SKA infrastructure related costs.     

射电望远镜多目标观测策略优化

望远镜调度是望远镜运行中的关键组成部分, 用于辅助科研人员进行合理的观测计划安排, 提高望远镜的运行效率, 获取高质量的观测数据. 然而, 由于不同观测项目的科学需求不同, 望远镜的调度过程十分复杂. 针对短周期多目标的观测项目, 考虑望远镜换源时转动时长、观测高度角等因素进行建模, 采用贪心算法对中国科学院新疆天文台南山26m望远镜脉冲星到达时间观测列表进行调度. 通过模拟表明, 使用算法完成的观测列表可以有效地减少观测过程中的平均转动时长, 提升观测数据的质量, 提高望远镜时间利用率, 减少科研人员对观测列表编排的负担.     

NLST: India's National Large Solar Telescope

This article introduces the new Indian 2 m telescope which has been designed by MT Mechatronics in a detailed conceptual design study for the Indian Institute of Astrophysics, Bangalore. We describe the background of the project and the science goals which shall be addressed with this telescope. NLST is a solar telescope with high optical throughput and will be equipped with an integrated Adaptive Optics system. It is optimized for a site with the kind of seeing and wind conditions as they are expected at a lake site in the Himalayan mountains. The telescope can also be used for certain night time applications. We also give the scientific rationale for this class of telescope (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

All‐spherical telescope with extremely wide field of view

An all‐spherical catadioptic telescope with the angular field of view of several tens of degrees in diameter and spherical focal surface is proposed for the monitoring of large sky areas. We provide a few examples of such a system with the apertures up to 800 mm and the field of view 30° and 40° in diameter. The curvature of the focal surface is repaid by high performance of the telescope. In particular, the diameter of a circle that includes 80% of energy in the polychromatic image of a star is in the range 1.″4–1.″9 across the field of 30° size and 2.″2–2.″9 for the field of 40° size. Some ways of working with curved focal surfaces are discussed. (© 2016 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A Simple Model Of Software Costs For The Square Kilometre Array

Software costs for radio telescopes have nearly always been underestimated. Since the Square Kilometre Array is often called a software telescope, repeating the usual error would be particularly egregious. We estimate software costs by scaling from the reasonably well-known costs for the Atacama Large Millimeter Array. The resulting model has sharp dependency on the complexity of the SKA, suggesting the obvious – that software costs can most easily be limited by constraining the scientific and operational requirements. A bottom-up costing will not be possible until SKA is much more clearly defined. For the moment, we recommend that 20% of the SKA budget be allocated to software development.     

Grid integration of robotic telescopes

Robotic telescopes and grid technology have made significant progress in recent years. Both innovations offer important advantages over conventional technologies, particularly in combination with one another. Here, we introduce robotic telescopes used by the Astrophysical Institute Potsdam as ideal instruments for building a robotic telescope network. We also discuss the grid architecture and protocols facilitating the network integration that is being developed by the German AstroGrid‐D project. Finally, we present three user interfaces employed for this purpose. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Pendular seismometer for correcting telescope vibrations

Vibrations of telescopes can be successfully corrected in real time using a seismometer as an inertial reference. A prototype pendular seismometer is described that is suitable for angular vibration measurements at frequencies from a few tenths to several tens of Hz. The average pendulum position is maintained by a slow servo system that also damps its resonance. The prototype instrument has an rms noise of 3 milliarcsec in the 0–25-Hz band. It was tested on a 1-m telescope, and a good agreement of the seismometer signal with the direct optical measurements of the optical axis fluctuations of the telescope was found. A frequency response of the seismometer is studied, an expression for the rms amplitude of residual (uncompensated) vibrations is given. In space applications it is suggested that a pendular mirror in front of the telescope is used as an inertial reference for vibration correction.     

From Nearby Low Luminosity AGN to High Redshift Radio Galaxies: Science Interests with Square Kilometre Array

We present detailed science cases that a large fraction of the Indian AGN community is interested in pursuing with the upcoming Square Kilometre Array (SKA). These interests range from understanding low luminosity active galactic nuclei in the nearby Universe to powerful radio galaxies at high redshifts. Important unresolved science questions in AGN physics are discussed. Ongoing low-frequency surveys with the SKA pathfinder telescope GMRT, are highlighted.