TWO－DIMENSIONAL MATHEMATICAL MODEL FOR STUDYING EROSION AND SEDIMENTATION OF A WANDERING STRETCH IN THE LOWER YELLOW RIVER

ＴＷＯ－ＤＩＭＥＮＳＩＯＮＡＬＭＡＴＨＥＭＡＴＩＣＡＬＭＯＤＥＬＦＯＲＳＴＵＤＹＩＮＧＥＲＯＳＩＯＮＡＮＤＳＥＤＩＭＥＮＴＡＴＩＯＮＯＦＡＷＡＮＤＥＲＩＮＧＳＴＲＥＴＣＨＩＮＴＨＥＬＯＷＥＲＹＥＬＬＯＷＲＩＶＥＲ￥ＺＨＡＮＧＳｈｉｑｉｒ（Ｓｅｎｉｏｒ...     

Spatial variation of flow characteristics in a subarctic meandering river in ice-covered and open-channel conditions: A 2D hydrodynamic modelling approach

To be able to understand year-round river channel evolution both at present and in the future, the spatial variation of the flow characteristics and their sediment transport capabilities under ice cover need to be detected. As the measurements done through cross-sectional drill holes cover only a small portion of the river channel area, the numerical simulations give insight into the wider spatial horizontal variation of the flow characteristics. Therefore, we simulate the ice-covered flow with a hydrodynamic two-dimensional (2D) model in a meandering subarctic river (Pulmanki River, Finland) in mid-winter conditions and compare them to the pre-winter open-channel low flow situation. Based on the simulations, which are calibrated with reference measurements, we aim to detect (1) how ice-covered mid-winter flow characteristics vary spatially and (2) the erosion and sedimentation potential of the ice-covered flow compared to open-channel conditions. The 2D hydrodynamic model replicated the observed flow characteristics in both open-channel and ice-covered conditions. During both seasons, the greatest erosional forces locate in the shallow sections. The narrow, freely flowing channel area found in mid-winter cause the main differences in the spatial flow variation between seasons. Despite the causes of the horizontal recirculating flow structures being similar in both seasons, the structures formed in different locations depended on whether the river was open or ice covered. The critical thresholds for particle entrainment are exceeded more often in open-channel conditions than during ice-covered flow. The results indicate spatially extensive sediment transport in open-channel conditions, but that the spatial variability and differences in depositional and erosional locations increase in ice-covered conditions. Asymmetrical bends and straight reaches erode throughout the year, whereas symmetrical, smaller bends mainly erode in open-channel conditions and are prone to deposition in winter. The long ice-covered season can greatly affect the annual morphology of the submerged channel. © 2019 John Wiley & Sons, Ltd.     

2D NUMERICAL SIMULATION OF FLOOD AND FLUVIAL PROCESS IN THE MEANDERING AND ISLAND-BRAIDED MIDDLE YANGTZE RIVER

The characteristics of water flow and sediment transport in a typical meandering and island-braided reach of the middle Yangtze River is investigated using a two-dimensional （2D） mathematical model. The major problems studied in the paper include the carrying capacity for suspended load, the incipient velocity and transport formula of non-uniform sediment, the thickness of the mixed layer on the riverbed, and the partitioning of bed load and suspended load. The model parameters are calibrated using extensive field data. Water surface profiles, distribution of flow velocities, riverbed deformation are verified with site measurements. The model is applied to a meandering and island-braided section of the Wakouzi-Majiazui reach in the middle Yangtze River, which is about 200 km downstream from the Three Gorges Dam, to study the training scheme of the navigation channels. The model predicts the processes of sediment deposition and fiver bed erosion, changes of flow stage and navigation conditions for the first 20 years of impoundment of the Three Gorges Project.     

Modelling centennial sediment waves in an eroding landscape – catchment complexity

Sediment flux dynamics in fluvial systems have often been related to changes in external drivers of topography, climate or land cover. It is well known that these dynamics are non‐linear. Recently, model simulations of fluvial activity and landscape evolution have suggested that self‐organization in landscapes can also cause internal complexity in the sedimentary record. In this contribution one particular case of self‐organization is explored in the Sabinal field study area, Spain, where several dynamic zones of sedimentation and incision are observed along the current river bed. Whether these zones can be caused by internal complexity was tested with landscape evolution model (LEM) LAPSUS (Landscape Process Modelling at Multi‐dimensions and Scales). During various 500 year simulations, zones of sedimentation appear to move upstream and downstream in eroding river channels (‘waves’). These waves are visualized and characterized for a range of model settings under constant external forcing, and the self‐organizing process behind their occurrence is analysed. Results indicate that this process is not necessarily related to simplifications in the model and is more generic than the process of bed‐armouring that has recently been recognized as a cause for complexity in LEM simulations. We conclude that autogenic sediment waves are the result of the spatial propagation in time of feedbacks in local transport limited (deposition) and detachment limited (erosion) conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Modelling sediment deposition and phosphorus retention in a river floodplain

Phosphorus (P) is one of the major limiting nutrient in many freshwater ecosystems. During the last decade, attention has been focused on the fluxes of suspended sediment and particulate P through freshwater drainage systems because of severe eutrophication effects in aquatic ecosystems. Hence, the analysis and prediction of phosphorus and sediment dynamics constitute an important element for ecological conservation and restoration of freshwater ecosystems. In that sense, the development of a suitable prediction model is justified, and the present work is devoted to the validation and application of a predictive soluble reactive phosphorus (SRP) uptake and sedimentation models, to a real riparian system of the middle Ebro river floodplain. Both models are coupled to a fully distributed two‐dimensional shallow‐water flow numerical model. The SRP uptake model is validated using data from three field experiments. The model predictions show a good accuracy for SRP concentration, where the linear regressions between measured and calculated values of the three experiments were significant (r² ≥ 0.62; p ≤ 0.05), and a Nash–Sutcliffe coefficient (E) that ranged from 0.54 to 0.62. The sedimentation model is validated using field data collected during two real flooding events within the same river reach. The comparison between calculated and measured sediment depositions showed a significant linear regression (p ≤ 0.05; r² = 0.97) and an E that ranged from 0.63 to 0.78. Subsequently, the complete model that includes flow dynamics, solute transport, SRP uptake and sedimentation is used to simulate and analyse floodplain sediment deposition, river nutrient contribution and SRP uptake. According to this analysis, the main SRP uptake process appears to be the sediment sorption. The analysis also reveals the presence of a lateral gradient of hydrological connectivity that decreases with distance from the river and controls the river matter contribution to the floodplain. Copyright © 2014 John Wiley & Sons, Ltd.     

Effects of discharge,wind, and tide on sedimentation in a recently restored tidal freshwater wetland

Sediment deposition is one of the key mechanisms to counteract the impact of sea level rise in tidal freshwater wetlands (TFWs). However, information about sediment deposition rates in TFWs is limited, especially for those located in the transition zone between the fluvially dominated and tidally dominated sections of a river delta where sedimentation rates are affected by the combined impact of river discharge, wind, and tides. Using a combined hydrodynamic–morphological model, we examined how hydrometeorological boundary conditions control sedimentation rates and patterns in a TFW located in the Rhine–Meuse estuary in the Netherlands. The modelling results show that net sedimentation rate increases with the magnitude of the river discharge, whereas stronger wind increasingly prevents sedimentation. Sediment trapping efficiency decreases for both increasing river discharge and wind magnitude. The impact of wind storms on the trapping efficiency becomes smaller for higher water discharge. The spatial sedimentation patterns are affected by all controls. Our study illustrates the importance of evaluating both the separate and the joint impact of discharge, wind, and tides when estimating sedimentation rates in a TFW affected by these controls. Such insights are relevant to design measures to reactivate the sedimentation process in these areas.     

SEDIMENT MANAGEMENT IN HYDROELECTRIC PROJECTS

Withdrawal of water from a river into a canal involves the construction of a barrage or a dam across the river depending on whether the river is perennial or not. The design of the reservoir upstream of the dam and of the canal requires consideration of the sediment load carried by the river in case the river is sediment-laden. The basic equations concerning morphological changes in such rivers are discussed with particular reference to computation of reservoir sedimentation. The hydraulics of lined canals carrying wash load is examined from the point of view of limiting transport capacity and changes in frictional resistance. Lastly, the methods of design of sediment extraction devices like settling basins and vortex chambers are presented.     

CHARACTERIZATION AND CAUSATION OF RUNOFF AND SEDIMENT VARIATION IN THE JIALINGJIANG RIVER BASIN

The Jialingjiang River basin is one of the main sediment contributing areas in the upper reaches of the Changjiang River. Great changes have taken place in the runoff and sediment discharge in recent years. Comparing the data of 1991-2003 with the data of 1954-1990, the annual runoff of the Jialingjiang River basin decreased by 23 %, and the suspended sediment transport decreased by 74% or 105 million tons. The main factors affecting the reduction include a decrease in rainfall, sediment detention of hydraulic structures, soil and water conservation activities, sedimentation and sand dredging in the river channel. Thorough investigation and analysis of the contribution of each factor to the sediment decrease at Beibei Station was determined for the first time. The following are the contributing percentages for each factor: a decrease in runoff accounted for 32.9%; soil and water conservation measures accounted for 16.4%; sediment detention of hydraulic structures accounted for 30.5%; sedimentation, river channel sand dredging, and other factors accounted for 20.2%. These findings are very important for forecasting the trend of inflow sediment discharge variation.     

The influence of dilution on downstream channel sedimentation in large rivers: the Yellow River,China

Due to the temporal decoupling of water and sediment sources in a large river basin, a flood from a sediment source area with high suspended sediment concentration (SSC) may be diluted by flow from a major runoff source area with low SSC. In this paper, this dilution effect is considered for 145 flood events from the Yellow River, China. Two indices (β₁ and β₂) describing the dilution effect are proposed, based on water and sediment from the clear water source area and the coarse sediment producing area. Regression equations between channel sedimentation (S_dep) and β₁ and β₂ are established based on flood events and annual data, respectively. The results show that dilution reduces channel sedimentation in the lower reaches by 34?1% and that this is related to a reduced frequency of hyperconcentrated flows in the lower reaches. The Longyangxia Reservoir for hydro‐electric generation has stored huge quantities of clear runoff from the upper Yellow River during high‐flow season since 1985, greatly reducing the dilution of the hyperconcentrated floods and therefore enhancing sedimentation in the lower reaches. For the purpose of reducing sedimentation, changing the operational mode of the Longyangxia Reservoir to restore the dilution effect is suggested. Copyright © 2013 John Wiley & Sons, Ltd.     

Two-thousand years of debates and practices of Yellow River training strategies

Throughout the history of China, the Yellow River has been associated with flood disasters and changes in the course of its lower reaches because of sedimentation. From 602 B.C. to 1949 the river experienced 1593 levee bursts, flooding vast areas, and claiming millions of human lives. The river shifted its main course by avulsion 26 times with the apex around Zhengzhou, resulting in devastating calamities and numerous old channels. Training of the Yellow River has a history of more than 3000 yr. Levee construction has been the major strategy for flood control. Two extremely different strategies has been proposed and practiced in the past 2000 yr, i.e. the "wide river and depositing sediment" strategy and the "narrow river and scouring sediment" strategy. This paper analyzes the levee breaches and flood disasters in the past 2000 yr and compares the results of the two extremely different strategies. The "narrow river and scouring sediment" strategy has only short term effects on levee breach control and flood mitigation. The "wide river and depositing sediment" strategy can essentially mitigate flood disasters and reduce levee breaches for a long term period of time. The "wide river and depositing sediment" strategy has been used and no levee breach has occurred in the past 67 yr, which has been the only periods of more than 50 yr with no levee breaches in the history of the Yellow River since 700 A.D.Modern flood and sedimentation management methods have also been introduced, and the strategy of applying the ' "widen the river and enhance the levees" approach for the upper and lower reaches management is proposed.     

Muskingum equation based downstream sediment flow simulation models for a river system

Applications of sediment transport and water flow characteristics based sediment transport simulation models for a river system are presented in this study. An existing water–sediment model and a new sediment–water model are used to formulate the simulation models representing water and sediment movement in a river system. The sediment–water model parameters account for water flow characteristics embodying sediment transport properties of a section. The models are revised formulations of the multiple water inflows model describing water movement through a river system as given by the Muskingum principle. The models are applied to a river system in Mississippi River basin to estimate downstream sediment concentration, sediment discharge, and water discharge. River system and the river section parameters are estimated using a revised and the original multiple water inflows models by applying the genetic algorithm. The models estimate downstream sediment transport rates on the basis of upstream sediment/water flow rates to a system. Model performance is evaluated by using standard statistical criteria;downstream water discharge resulting from the original multiple water inflows model using the estimated river system parameters indicate that the revised models satisfactorily describe water movement through a river system. Results obtained in the study demonstrate the applicability of the sediment transport and water flow characteristics-based simulation models in predicting downstream sediment transport and water flow rates in a river system.     

MODELLING FLOOD HYDRAULICS AND OVERBANK DEPOSITION ON RIVER FLOODPLAINS

This paper outlines a numerical model for the prediction of floodplain inundation sequences, overbank deposition rates and deposit grain size distributions. The model has two main components: first, a simplified hydraulic scheme which predicts floodwater flow depths and velocities, and second, a sediment transport element which employs a mass balance relation describing suspended sediment dispersion by convective and diffusive processes and sediment deposition as a function of particle settling rates. These relationships are solved numerically on a finite difference grid that accurately replicates the complex topographic features typical of natural river floodplains. The model is applied to a 600 m reach of the River Culm, Devon, U.K. using data derived from a range of field and laboratory techniques. Continuous records of river stage and suspended sediment concentration provide the model's upstream boundary input requirements. These are supplemented by measurements of the in situ settling characteristics of the suspended sediment load. The model's sediment transport component is calibrated with the aid of a dataset of measured overbank deposition amounts derived from flood events over a 16 month period. The model is shown to predict complicated floodwater inundation sequences and patterns of suspended sediment dispersion and deposition, which are largely a product of the complex topography of the floodplain. These results compare favourably with observations of overbank processes and are an improvement over those of previous models which have employed relatively simple representations of floodplain geometry. © 1997 by John Wiley & Sons, Ltd.     

Computational modeling of flow and sediment transport and deposition in meandering rivers

A computational modeling analysis of the flow and sediment transport, and deposition in meandering-river models was performed. The Reynolds stress transport model of the FLUENT^TM code was used for evaluating the river flow characteristics, including the mean velocity field and the Reynolds stress components. The simulation results were compared with the available experimental data of the river model and discussed. The Lagrangian tracking of individual particles was performed, and the transport and deposition of particles of various sizes in the meandering river were analyzed. Particular attention was given to the sedimentation patterns of different size particles in the river-bend model. The flow patterns in a physical river were also studied. A Froude number based scale ratio of 1:100 was used, and the flow patterns in the physical and river models are compared. The result shows that the mean-flow quantities exhibit dynamic similarity, but the turbulence parameters of the physical river are different from the model. More strikingly, the particle sedimentation features in the physical and river models do not obey the expected similarity scaling.     

Modelling floodplain sedimentation using particle tracking

Both climate change and river rehabilitation projects induce changes in floodplain sedimentation. Notably along the lower River Rhine, the sediment deposition patterns and rates are subject to change. To assess the magnitude of these changes, we developed the MoCSED model, a floodplain sedimentation model within a geographical information system for the lower Rhine River. We based MoCSED on the ‘method of characteristics’ (MoC), a particle tracking method that minimizes numerical dispersion. We implemented the MoCSED model in the PCRaster dynamic modelling language. The model input comprises initial suspended sediment concentrations, water levels, flow velocities, and longitudinal and transverse dispersivities. We used a combination of the Krone and Chen concepts to calculate the subsequent sedimentation (SED routine). We compared the model results with sediment trap data for the Bemmel floodplain along the Dutch Waal River during the 2003 inundation. This comparison showed that MoCSED was able to simulate the pattern of sediment deposition. In addition, the model proved to be an improvement in comparison with a conventional raster‐based floodplain sedimentation model for the lower River Rhine. In future, MoCSED may serve well to study the impact of a changing discharge regime due to climate change and floodplain rehabilitation plans on deposition of sediments. Copyright © 2006 John Wiley & Sons, Ltd.     

Formation process of meandering channel by a 2D numerical simulation

A 2D depth-averaged model for hydrodynamic,sediment transport and river morphological adjustment is presented.The sediment transport submodel considers non-uniform sediment,bed surface armoring,impact of secondary flow on the direction of bed-load transport,and transverse slope of river bed.The bank erosion submodel incorporates a simple simulation method for updating bank geometry during either degradational or aggradational bed evolution.The model is applied to a 180°bend with a constant radius under unsteady flow conditions,and to Friedkin’s laboratory meander channels.The results are in acceptable agreement with measurements,confirming the two dimensional model’s potential in predicting the formation of river meandering and improving understanding of patterning processes.Future researches are needed to clarify some simplifications and limitations of the model.     

EFFECT OF COAL MINING ON RIVER SEDIMENTATION-A Case Study From The Shengfu-Dongsheng Coal FieldIn The Loess Plateau, North China

IINTRODUCTIONTheWulanmulunheRiver(theupperreachoftheKuyeheRiver)isatributaryoftheYellowRiver(Fig.I).Ithasawatershedareaof3839km2upstreamfromtheoutletgaugingstationatWangdaohengta(ithasbeensuccessfollyoperatedsince1958).ThisisafieldinthefragileecologicalareaoftheLoessPlateau.AnnualrainfallintheWulanmulenheRiverbasinrangesfrom124mmto640rumwithanaverageof343mm.Themaincharacteristicsofrainfallarehighintensityandspatialandtemporalheterogenety.Nearly70%ofthetotalannualrainfallfallsinthefl…     

维波场延拓复杂表层模型校正方法及应用

如何正确地消除复杂地表对地震波场的影响，提高地下构造成像的质量一直是中国西部复杂地区地震勘探中存在的难题.本文在三维复杂表层速度模型层析反演\[1\]的基础上，研究了关于复杂地表的静校正问题，提出用三维波动方程在炮集上对地震波场进行正、反向延拓，消除复杂地表对波场的影响，实现三维复杂表层模型校正.理论和实际应用证明，该方法已超越常规静校正的含义，属时变校正方法.用本方法处理复杂地表问题，不但能消除表层对不同深度反射波产生的不同时差影响，提高叠加剖面质量，而且能使校正后的地震波场保持波动特征不发生畸变，可为建立正确的深层速度模型和波动方程叠前深度偏移奠定良好的基础.     

Dynamic flood topographies in the Terai region of Nepal

Flood hazard maps used to inform and build resilience in remote communities in the Terai region of southern Nepal are based on outdated and static digital elevation models (DEMs), which do not reflect dynamic river configuration or hydrology. Episodic changes in river course, sediment dynamics, and the distribution of flow down large bifurcation nodes can modify the extent of flooding in this region, but these processes are rarely considered in flood hazard assessment. Here, we develop a 2D hydrodynamic flood model of the Karnali River in the Terai region of west Nepal. A number of scenarios are tested examining different DEMs, variable bed elevations to simulate bed aggradation and incision, and updating bed elevations at a large bifurcation node to reflect field observations. By changing the age of the DEM used in the model, a 9.5% increase in inundation extent was observed for a 20-year flood discharge. Reducing horizontal DEM resolution alone resulted in a <1% change. Uniformly varying the bed elevation led to a 36% change in inundation extent. Finally, changes in bed elevation at the main bifurcation to reflect observed conditions resulted in the diversion of the majority of flow into the west branch, consistent with measured discharge ratios between the two branches, and a 32% change in inundation extent. Although the total flood inundation area was reduced (−4%), there was increased inundation along the west bank. Our results suggest that regular field measurements of bed elevation and updated DEMs following large sediment-generating events, and at topographically sensitive areas such as large river bifurcations, could help improve model inputs in future flood prediction models. This is particularly important following flood events carrying large sediment loads out of mountainous regions that could promote bed aggradation and channel switching across densely populated alluvial river systems and floodplains further downstream. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Variational data assimilation in the transport of sediment in river

The variational method of data assimilation is used to solve an inverse problem in the transport of sediment in river, which plays an important role in the change of natural environment. The cost function is defined to measure the error between model predictions and field observations. The adjoint model of IAP river sedimentation model is created to obtain the gradient of the cost function with respect to control variables. The initial conditions are taken as the control variables; their optimal values can be retrieved by minimizing the cost function with limited memory quasi-Newton method (LMQN). The results show that the adjoint method approach can successfully make the model prediction well fit the simulated observations. And it is expected to use this method to solve other inverse problems of river sedimentation. But some numerical problems need to be discussed before applying to real river data. Project partially supported by the State Key Laboratory of Numerical Modelling for Atmospheric Sciences and Geophysical Fluid Dynamics, Institute of Atmospheric Physics, Chinese Academy of Sciences     

Future fluvial erosion and sedimentation potential of cohesive sediments in a coastal river reach of SW Finland

This study aims to analyse the combined impacts of future discharges and sea levels on erosion–sedimentation potential, and its seasonal changes, in a ~43‐km‐long coastal river reach of South‐west Finland. To our knowledge, this kind of combined study has not been performed before. In addition to surveying the present erosion–sedimentation conditions, the daily erosion–sedimentation potential is simulated with a one‐dimensional hydrodynamic model for the 1971–2000 and 2070–2099 periods by applying four discharge scenarios. Different sea level stages are also employed in the simulations. All scenarios forecast increasing autumn and winter discharges, but diminishing summer discharges. This indicates increasing river channel erosion, particularly during winters and autumns. Although discharge changes have altogether a greater influence on erosion–sedimentation potential, the importance of sea level changes on sedimentation is noticeable in the estuary. The rising sea level scenarios increase the sedimentation potential. In total, by 2070–2099, the erosion potential may increase in most parts of the study area. Copyright © 2013 John Wiley & Sons, Ltd.