基于CPTU解释黏性土不排水抗剪强度方法研究

黏性土的不排水抗剪强度Su是海上风电工程设计中重要的力学参数之一,孔压静力触探测试（简称CPTU）无法直接测得黏土强度,但其所提供的锥尖阻力、侧摩阻力以及孔隙水压力与土体的不排水抗剪强度存在映射关系,国内外基于CPTU已经演化出多种解释土体不排水抗剪强度计算公式。基于滨海某海上风电项目,开展了原位CPTU试验、三轴不固结不排水（UU）、三轴固结不排水（CU）、固结快剪（CQ）以及船上微型十字板剪切（MVST）试验,对已有计算公式的适用性进行了校验,分析发现需根据区域场地情况对其中经验系数进行相应的调整以提高计算精度。研究基于CU试验结果,结合工程实例对原有公式中经验参数进行优化修正,最后通过误差分析,验证了修正预测模型的准确性与合理性,利用改进后的修正预测模型可使江苏地区海域黏性土不排水抗剪强度的计算得到更准确的结果。     

循环荷载作用下粉土的动力学特征

选用近海分布广泛的粉土为研究对象,利用动三轴压缩试验结果得到了动荷载作用下粉土的应力-应变关系、孔压发展模式及动强度与临界循环次数之间的关系;探讨固结围压和固结比对粉土动力学性质的影响。动力学试验结果表明,动剪切模量随着固结围压的增大而增大,动阻尼比随动剪应变幅的变化关系受围压影响不大;不同围压对动剪应力的比值影响很小,同一围压下随着固结比的增大,动剪应力比也会随之增大;不同围压及不同固结比对以Nf表示的峰值孔隙水压力发展模式影响很小。     

Laboratory and Field Observations for Golden Horn Marine Clay

Istanbul, the largest city in Turkey and one of the major metropolitan areas in the world, cleaned one of its environmentally polluted areas—Golden Horn—by dredging 5 million m³ of the bottom sediments and pumping the resulting sludge to a storage area behind a dam built at an abandoned rock quarry site in Alibey district. The reclamation of the land that formed over the storage area of Golden Horn dredged material is socially and economically very desirable. In this paper, results from experimental studies that are focused on determining the shear strength behavior of the dredge material and undisturbed soil are presented. Slurry consolidometer test, large model tests and small model tests are used to consolidate the dredged soil samples from Halic to simulate the natural consolidation behavior of these soils. Shear strength parameters are determined by laboratory vane tests; unconfined compression tests; undrained-unconsolidated (UU) and consolidated-undrained (CU) triaxial tests on samples that are obtained through in situ undisturbed samples and laboratory model tank and slurry consolidation. Moreover, the effects of fly ash and lime additives on the undrained shear strength were determined by mixing the materials with the dredged clay from Golden Horn during the model experiments conducted in the laboratory. Based on these findings, equations are proposed that govern the relationships between undrained shear strength and water content value.     

深海能源土含气储层力学特性三轴试验研究

为研究深海能源土在负压开采过程中含气储层的力学特性,基于含气土赋存理论,提出一种能够控制含气量及气泡大小的制样方法,通过GDS标准应力路径三轴试验系统,开展深海能源土含气储层的固结排水试验研究,分析深海能源土在不同黏土含量及不同含气量下的力学响应规律。研究结果表明：围压变化对深海能源土含气储层的抗剪强度峰值大小影响显著,围压越大抗剪强度峰值越高;黏土含量是决定应力应变曲线变化趋势的关键影响因素,黏土含量越高试样抗剪强度越低,试样抵抗应变软化效应的能力越强;含气土比饱和土体承载能力更低,且承载能力随含气量的增大呈衰减趋势;黏土含量和含气量是深海能源土含气储层抗剪强度指标的重要影响因素,黏土含量、含气量越高,土体自身的总抗剪强度值越低。     

Effect of nano-MgO on mechanical performance of cement stabilized silty clay

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.     

南黄海油气资源区粘性土物理力学性质及微结构特征

用土质学的显微结构理论和技术方法,研究了南黄海油气资源区粘性土微结构特征。结合原状样物理力学性质参数,研究颗粒接触、堆垒、孔隙等现象与物理力学性质之间的关系。研究结果表明,沉积物主要为粘质粉土、淤泥质粉质粘土和淤泥等粘性土,其微结构类型有粒状链接微结构、蜂窝状微结构和疏松基质状微结构3种,其中淤泥类土主要为蜂窝状微结构和疏松基质状微结构,结构疏松,孔隙度较大,含水率很高,强度低,压缩性高。粘质粉土为粒状链接微结构．含水率较低,孔隙度相对淤泥类土较小,抗剪强度比淤泥类土略高,压缩性较高。该区粘性土为不理想工程地基土,工程施工时应采取相应措施避开或对其进行改良。     

Mechanical properties of calcareous silts in a hydraulic fill island-reef

Abstract

The mechanical characteristics of calcareous silt interlayers play an important role in the stability of island-reef foundations. Direct shear and consolidation tests were performed to study the relationship between the mechanical properties and the physical parameters of calcareous silt. Based on the consolidation test results and analysis of the settling examples, different calculation methods for soil settling were compared. The results show the following. (1) The relationship between the cohesion and water content of calcareous silt can be represented by an M-shaped curve. The water contents corresponding to the two peaks of the M-type curve increase with increasing dry density. (2) When the dry density is less than 1.33?g/cm³, increasing the density significantly improves the internal friction angle of calcareous silts. When the dry density of the calcareous silt is greater than 1.33?g/cm³, the internal friction angle is affected by both the dry density and the water content. (3) The shear strength decreases when the water content exceeds the optimum level. (4) The compressive modulus of calcareous silt is larger than that of terrigenous silt. Specifically, it decreases with decreasing dry density and increasing water content. (5) The stepwise loading method should be used to estimate the soil settling before fill engineering construction.     

海底沉积物纵波速度与强度参数关系模型研究

海底沉积物具有质地松软、强度低的特点,其强度参数与海上平台插桩就位、导管架的安装等工程关系紧密,与海上作业安全息息相关。常规钻孔取芯与静力触探等强度参数获取方法成本较高、取样点少,且对沉积物扰动较大,利用易获取的声学资料预测海底沉积物的强度参数具有重要研究意义。本文基于Wood方程、Biot-Stoll模型、Dvorkin等效介质模型等声波传播理论,计算不同物性参数（密度、孔隙度）梯度下的理论纵波速度,结合室内模拟地层声学实验,对比了模型计算声速与实测声速的变化特征,建立了声速与物性参数关系模型。基于室内模拟地层土力学试验,揭示了沉积物物性与抗剪强度、黏聚力等参数之间的关系,建立了物性与强度参数关系模型。以物性参数为桥梁,建立基于声学特征的海底沉积物强度参数预测模型。此模型既避免了原位取样沉积物失水扰动的问题,又弥补了经验公式局限性的缺点,具有普适性与准确性,有效提高无法取样地区沉积物强度参数的精度,提高了经济效益,对浅层的勘探与开发起到了理论指导的作用。     

Experimental study on the cyclic behavior of loose calcareous sand under linear stress paths

Abstract

Hollow cylinder torsional shear tests on loose isotropically and anisotropically consolidated calcareous sand were conducted to investigate the cyclic behavior under three different linear stress paths, including horizontal line, oblique line, and vertical line stress paths, in a coordinate system of the normal stress difference and the horizontal shear stress. The dominant strain components of the isotropically consolidated specimens are affected by the stress paths. With increasing consolidation stress ratio, axial strain gradually becomes the dominant strain component under the three different stress paths. The cyclic strength of the isotropically consolidated specimens under the three different stress paths are almost the same, while for the anisotropically consolidated specimens, the cyclic strengths are strongly affected by the stress paths. These results indicate that conventional cyclic triaxial tests may overestimate cyclic strength in some cases. Irrespective of the stress paths and cyclic stress ratios, the terminal residual excess pore pressure ratio decreases with increasing consolidation stress ratio. Moreover, an empirical equation is proposed to describe the relationship between the normalized shear work and the normalized residual excess pore pressure ratio. The comparative study reveals that the relationship proposed for silica sand is not suitable for the dynamic analyses of calcareous sand.     

冰激振动下海洋平台地基土的动力液化研究

通过动力荷载分析,确定海冰荷载可以引起平台筒边土体液化,并阐述了判别土体液化的方法.利用冰激振动软件以及有限元软件对结构进行动力学分析,得到各筒边土体的最大剪应力.通过室内三轴实验和现场观测结果确定土体物理力学参数,利用判定公式计算得到土体抗液化极限应力.将两者进行对比,可判断筒边土体是否可能发生液化.以渤海某油田筒型基础平台为例,对平台基础土液化安全性进行了判别,证明该方法具有较强的创新性和可行性,对于这一类浅基础平台的地基土液化分析有一定的实践指导作用.     

循环荷载下粉土液化流动特性拖球试验研究

基于流体力学中的Stokes黏滞阻力理论,以振动台试验为基础,开发了一套测量液化过程中粉土流变特性的拖球试验装置。在铺有粉土海床的模型箱内埋设光滑小球,通过测量小球水平运动过程中所受阻力值的大小,计算粉土液化的表观动力黏度,分析粉土液化过程中的表观动力黏度与超孔压比之间的关系,以及液化后表观黏度与应变率的变化规律。试验结果表明,振动台试验下,孔隙压力表现为迅速上升,粉土迅速达到液化状态;振动过程对海床固结影响较大;粉土海床在未达到完全液化状态时（ru<1）,表观黏度随超孔压比增大而减小,在液化状态下（ru=1）,剪应力随应变率增大而减小,粉土呈现出剪切稀化的特点,为典型的非牛顿流体特征。     

Microfabric, chemical and mineralogical study of Indian marine clays

Marine clay deposits are encountered in the coastal regions of the world. They are soft in consistency with low shear strength and are highly compressible. The properties of these deposits are complex and diverse, and they mainly depend on the minerals present and microstructural arrangement of constituent particles. In the present investigation, the physico-chemical properties of the sediment samples obtained from marine deposits of east and west metropolitan coastal cities of India are discussed, and the test results obtained are compared with the synthetic samples such as bentonite and kaolinite. Mineralogical and fabric studies were carried out using scanning electron microscopy and x-ray diffraction techniques. Several consolidation and strength tests were carried out to study the engineering behaviour of these deposits. The strength and compressibility (Cc) values of these deposits varies from 27 to 45 kN/m² and 0.37 to 0.81 respectively. XRD studies confirm the presence of highly compressible clay minerals such as smectite, vermiculite, chlorite and traces of the low swelling mineral, kaolinite. The fabric studies indicate that the constituent particles were arranged in an open network, or flocculated structure resulting in a high void ratio.     

静力触探技术在东海陆架工程勘察中的应用研究

通过对东海大陆架海底浅表层土样的静力触探参数进行统计分析,得到该区域细砂、粘土、淤泥质土和淤泥的静力触探统计值,建立了研究海区基于静力触探参数的土类判别图,可用于快速判定土的类别.根据静力触探参数,并应用经验公式估算了海底粘性土的抗剪强度和灵敏度,对估算公式经验系数选择进行了深入研究,提出在研究海区应用经验公式进行粘性...     

黄河口粉质土沉积物侵蚀性动态变化试验研究

通过一系列室内试验,研究了黄河口粉质类沉积物在循环动荷载作用后侵蚀性的变化.在试验中,采用真空预压固结装置制备重塑土样,采用液压伺服土动三轴试验机实现了不同幅值及不同振次的动荷载作用条件,并通过动三轴静态试验及贯入强度测试,测定了动荷载作用后土样强度的变化.通过水槽冲刷试验测试了不同条件的动荷载作用后,土样抗冲刷能力的变化,并进行了临界剪切应力的计算.试验结果表明:对于黄河口粉质类沉积物,动荷载作用后其强度及抗侵蚀性均降低;沉积物强度指标(不排水剪切强度、残余强度、贯入阻力)、侵蚀性指标(起动流速、临界剪切应力、冲刷率)与动荷载幅值、动荷载振次均呈现出较好的线性相关性.     

Microfabric,chemical and mineralogical study of Indian marine clays

Marine clay deposits are encountered in the coastal regions of the world. They are soft in consistency with low shear strength and are highly compressible. The properties of these deposits are complex and diverse, and they mainly depend on the minerals present and microstructural arrangement of constituent particles. In the present investigation, the physico-chemical properties of the sediment samples obtained from marine deposits of east and west metropolitan coastal cities of India are discussed, and the test results obtained are compared with the synthetic samples such as bentonite and kaolinite. Mineralogical and fabric studies were carried out using scanning electron microscopy and x-ray diffraction techniques. Several consolidation and strength tests were carried out to study the engineering behaviour of these deposits. The strength and compressibility (Cc) values of these deposits varies from 27 to 45 kN/m² and 0.37 to 0.81 respectively. XRD studies confirm the presence of highly compressible clay minerals such as smectite, vermiculite, chlorite and traces of the low swelling mineral, kaolinite. The fabric studies indicate that the constituent particles were arranged in an open network, or flocculated structure resulting in a high void ratio.     

海洋粉质粘土在波浪荷载作用后的不排水抗剪强度衰化特性

通过对南海重塑粉质粘土土样的大量动三轴试验结果分析,得到此种土在波浪荷载作用后不捧水抗剪强度衰化同动载作用引起的动应变幅及平均累积孔压之间的相互关系和预估公式;并通过与超固结土样的静三轴剪切试验结果的比较,发现动、静三轴两种试验结果具有很好的吻合关系。建议可用超固结土样的静三轴剪切试验同时结合部分动三轴试验来预估土样在波浪荷载作用后不排水抗剪强度衰化与平均累积孔压之间的关系。     

Strength Behavior of Naturally Cemented Marine Clay Due to Change in Ground Water Level

The change in strength and deformation behavior of a typical marine clay deposit formed under shallow water is presented and discussed for the conditions of changing water table. This is a costal marine clay deposit with moderate carbonates along the east coast of India. The soil samples were taken from tidal flats where the sea had receded some time back, and the behavior of this deposit had been studied for the conditions of 1976, with high water table, and for the conditions of 2001, with depleted water table. Undisturbed soil samples were taken from sheeted open test pits. Standard consolidation and triaxial shear tests were conducted. Consolidation tests conducted on the samples taken for 1976 conditions with high water contents indicate that cementation effect are erased out under moderate stresses. Beyond this stress range, it behaves like soft, normally consolidated clay. In contrast, the results obtained from samples taken during 2001, with depleted water table, clearly indicate that the soil behaves like an over-consolidated one, and the improvement in the system is due to the chemical bonding and desiccation.     

Geotechnical characterization of calcareous sediments from the Dry Tortugas Keys and Marquesas Keys CBBL SRP study sites, Lower Florida Keys

Geotechnical characteristics of carbonate sediments from two test sites (Dry Tortugas Keys and Marquesas Keys) in the Lower Florida Keys were investigated as part of the Coastal Benthic Boundary Layer Special Research Program, through an extensive field coring and laboratory testing program conducted by the Marine Geomechanics Laboratory of the University of Rhode Island. Based on results from physical measurements, water content and wet bulk density values for both sites generally showed large variations in the upper 25 cm and little variation below this depth. Sediment samples exhibited low plasticity or nonplastic characteristics. Constant-rate-of-deformation consolidation test results showed strong apparent overconsolidation (stress state ratio >7.5) in the surface sediments (upper 50 cm) at the Dry Tortugas Keys, and light overconsolidation (stress state ratio <1.5) below 50-cm depth at the Marquesas Keys site. In-situ permeability values were between 10^-4 and 10^-7 cm/s at both sites and showed no strong depth dependence in the upper 2 m. Undrained shear strength profiles for Dry Tortugas Keys sediments indicated a marked stiffening with depth, whereas the Marquesas Keys sediments showed a gradual increase with depth. Consolidated isotropically undrained triaxial shear strength test results indicate that the undisturbed sediments had an average effective angle of internal friction of 38°, which is not fully realized until large axial strains on the order of 11% have accumulated. Evidence of cementation was not found in triaxial compression or consolidation test results. The general behavior and characteristics of these sediments are similar to those of granular materials, which is primarily due to their high calcium carbonate contents and lack of cementation.     

Stiffness Degradation of Undisturbed Saturated Soft Clay in Yangtze Estuary under Complex Stress Conditions

Stiffness degradation will occur due to the generation of accumulated pore pressure in saturated soft clays under cyclic loading. The soil static-dynamic multi-purpose triaxial and torsional shear apparatus in Dalian University of Technology was employed to perform different types of test on saturated soft marine clay in the Yangtze estuary. Undisturbed samples of the clay were subjected to undrained cyclic vertical and torsional coupling shear and cyclic torsional shear after three-directional anisotorpic consolidation with different initial consolidation parameters. Investigated were the effects of the initial orientation angle of the major principal stress, initial ratio of deviatoric stress, initial coefficient of intermediate principal stress and continuous rotation of principal stress axes on the stiffness degradation. It is found that the degradation index decreases (or degradation degree increases) significantly with increasing initial orientation angle of the major principal stress and initial ratio of deviatoric stress. Compared to the effects of the initial orientation angle of the major principal stress and initial ratio of deviatoric stress, the effect of initial coefficient of intermediate principal stress is less evident and this trend is more clearly reflected by the results of the cyclic torsional shear tests than those of the cyclic coupling shear tests. At the same cycle number, the degradation index obtained from the cyclic torsional shear test is higher than that from the cyclic coupling shear test. The main reason is that the continuous rotation in principal stress directions during cyclic coupling shear damages the original structure of the soil more than the cyclic torsional shear does. Based on a series of experiments, a mathematical model for stiffness degradation is proposed and the relevant parameters are determined.     

电阻率法监测黄河口海床沉积物固结过程现场试验研究

为了研究黄河口海床沉积物固结过程中电阻率同工程力学性质指标的对应关系,探索海床土体固结过程的新型原位监测技术,本文在黄河刁口流路三角洲叶瓣潮坪上,现场取土配置黄河口快速沉积形成的流体状沉积物和观测研究粉质土海床的固结过程。利用静力触探、十字板剪切试验、孔隙水压力监测等原位土工测试手段,实时测定固结过程中海床土强度变化和孔隙水压力消散过程;同时通过埋置自行研制的环形电极探杆,实时测定海床土固结过程中的电阻率变化。通过对比分析海床土电阻率与工程力学性质指标的同步测定数据发现:黄河口饱和粉土的电阻率与微型贯入试验测得的土体贯入强度,静力触探试验测得的比贯入阻力,十字板剪切试验测得的不排水抗剪强度(峰值强度、残余强度)均呈乘幂关系,且相关性良好;海床沉积物在固结过程中的电阻率与孔隙水压力呈负线性相关性。