共查询到20条相似文献,搜索用时 46 毫秒
1.
DONALD R. LOWE 《Sedimentology》1976,23(3):285-308
A clear distinction must be made between liquefied and fluidized systems. In liquefied beds and flows, the solids settle downward through the fluid, displacing it upward, whereas, in fluidized beds, the fluid moves upward through the solids, which are temporarily suspended without net downward movement. Many recent references to fluidized sediment gravity flows refer, in fact, to flows of liquefied debris. Most uniformly liquefied beds of well-sorted sand- or gravel-sized sediment will resediment as simple two-layer systems. Liquefied flows can originate either by liquefaction followed by failure, as in many retrogressive flow slides, or by failure followed by liquefaction, as in the case of some slumps. Empirical and theoretical estimates of flow velocity, thickness, and travel distance suggest that natural laminar liquefied flows of fine-grained sand will generally resediment after moving a kilometre or less. Laminar flows of coarse-grained sand will resediment after moving only a few metres. Grain dispersive pressure is thought to be of little significance in the development or maintenance of liquefied flows. Many surficial submarine sand beds are apparently susceptible to liquefaction, including submarine canyon and continental rise deposits. Within submarine canyons and narrow fjords, steep slopes and channels promote the evolution of liquefied flows from slumps by liquefaction after failure and of high density turbidity currents from liquefied flows by the development of turbulence. Upon moving into the lower parts of submarine canyons or into proximal fan channels, liquefied flows will resediment and high density turbidity currents will tend to decline to flows transitional between liquefied flows and turbidity currents. The liquefied, coarser detritus within such transitional flows will be deposited while finer-grained debris will remain in suspension and continue downslope as dilute turbidity currents. Resedimentation of the liquefied portions of such flows may be responsible for the deposition of the A-subdivision of many turbidites and many thick, structureless ‘proximal turbidites’ or ‘fluxoturbidites’. Similar units can originate by liquefaction of the traction deposits of normal turbidity currents. Fluidized flows are probably uncommon, thin, and, where formed, originate through fluidization of the fine-grained tops of liquefied graded beds. 相似文献
2.
Beds comprising debrite sandwiched within co-genetic turbidite: origin and widespread occurrence in distal depositional environments 总被引:11,自引:0,他引:11
Co‐genetic debrite–turbidite beds occur in a variety of modern and ancient turbidite systems. Their basic character is distinctive. An ungraded muddy sandstone interval is encased within mud‐poor graded sandstone, siltstone and mudstone. The muddy sandstone interval preserves evidence of en masse deposition and is thus termed a debrite. The mud‐poor sandstone, siltstone and mudstone show features indicating progressive layer‐by‐layer deposition and are thus called a turbidite. Palaeocurrent indicators, ubiquitous stratigraphic association and the position of hemipelagic intervals demonstrate that debrite and enclosing turbidite originate in the same event. Detailed field observations are presented for co‐genetic debrite–turbidite beds in three widespread sequences of variable age: the Miocene Marnoso Arenacea Formation in the Italian Apennines; the Silurian Aberystwyth Grits in Wales; and Quaternary deposits of the Agadir Basin, offshore Morocco. Deposition of these sequences occurred in similar unchannellized basin‐plain settings. Co‐genetic debrite–turbidite beds were deposited from longitudinally segregated flow events, comprising both debris flow and forerunning turbidity current. It is most likely that the debris flow was generated by relatively shallow (few tens of centimetres) erosion of mud‐rich sea‐floor sediment. Changes in the settling behaviour of sand grains from a muddy fluid as flows decelerated may also have contributed to debrite deposition. The association with distal settings results from the ubiquitous presence of muddy deposits in such locations, which may be eroded and disaggregated to form a cohesive debris flow. Debrite intervals may be extensive (> 26 × 10 km in the Marnoso Arenacea Formation) and are not restricted to basin margins. Such long debris flow run‐out on low‐gradient sea floor (< 0·1°) may simply be due to low yield strength (? 50 Pa) of the debris–water mixture. This study emphasizes that multiple flow types, and transformations between flow types, can occur within the distal parts of submarine flow events. 相似文献
3.
Much of our understanding of submarine sediment‐laden density flows that transport very large volumes (ca 1 to 100 km3) of sediment into the deep ocean comes from careful analysis of their deposits. Direct monitoring of these destructive and relatively inaccessible and infrequent flows is problematic. In order to understand how submarine sediment‐laden density flows evolve in space and time, lateral changes within individual flow deposits need to be documented. The geometry of beds and lithofacies intervals can be used to test existing depositional models and to assess the validity of experimental and numerical modelling of submarine flow events. This study of the Miocene Marnoso Arenacea Formation (Italy) provides the most extensive correlation of individual turbidity current and submarine debris flow deposits yet achieved in any ancient sequence. One hundred and nine sections were logged through a ca 30 m thick interval of time‐equivalent strata, between the Contessa Mega Bed and an overlying ‘columbine’ marker bed. Correlations extend for 120 km along the axis of the foreland basin, in a direction parallel to flow, and for 30 km across the foredeep outcrop. As a result of post‐depositional thrust faulting and shortening, this represents an across‐flow distance of over 60 km at the time of deposition. The correlation of beds containing thick (> 40 cm) sandstone intervals are documented. Almost all thick beds extend across the entire outcrop area, most becoming thinly bedded (< 40 cm) in distal sections. Palaeocurrent directions for flow deposits are sub‐parallel and indicate confinement by the lateral margins of the elongate foredeep. Flows were able to traverse the basin in opposing directions, suggesting a basin plain with a very low gradient. Small fractional changes in stratal thickness define several depocentres on either side of the Verghereto (high) area. The extensive bed continuity and limited evidence for flow defection suggest that intrabasinal bathymetric relief was subtle, substantially less than the thickness of flows. Thick beds contain two distinct types of sandstone. Ungraded mud‐rich sandstone intervals record evidence of en masse (debrite) deposition. Graded mud‐poor sandstone intervals are inferred to result from progressive grain‐by‐grain (turbidite) deposition. Clast‐rich muddy sandstone intervals pinch‐out abruptly in downflow and crossflow directions, in a fashion consistent with en masse (debrite) deposition. The tapered shape of mud‐poor sandstone intervals is consistent with an origin through progressive grain‐by‐grain (turbidite) deposition. Most correlated beds comprise both turbidite and debrite sandstone intervals. Intrabed transitions from exclusive turbidite sandstone, to turbidite sandstone overlain by debrite sandstone, are common in the downflow and crossflow directions. This spatial arrangement suggests either: (i) bypass of an initial debris flow past proximal sections, (ii) localized input of debris flows away from available sections, or (iii) generation of debris flows by transformation of turbidity currents on the basin plain because of seafloor erosion and/or abrupt flow deceleration. A single submarine flow event can comprise multiple flow phases and deposit a bed with complex lateral changes between mud‐rich and mud‐poor sandstone. 相似文献
4.
利用岩心、粒度、测井信息和重力流沉积理论,系统研究了南堡凹陷东部洼陷带东营组重力流沉积特征和沉积模式。该区重力流沉积砂岩常夹于灰色、灰黑色泥岩中,砂岩相发育,其中正递变层理(含砾)中-细砂岩相(S-3)、粉砂岩相(S-4)和块状层理中-细砂岩相(S-2)发育层数最多,块状层理含砾砂岩相(S-1)次之;S-2沉积厚度最大,S-1和S-3次之。按支撑和沉积机制,将本区重力流分为浊流、砂质碎屑流、颗粒流和液化流,其中砂质碎屑流以基质支撑、冻结块状沉积为特征。不同重力流发育程度有明显差异。从砂岩层数看,浊流最多,砂质碎屑流次之,颗粒流和液化流最少;从单期沉积厚度看,砂质碎屑流最大,平均为1.17m,浊流沉积最小,仅平均为0.25m。为了回避取心的局限性、弱化重力流成因,突出具有油气储集意义的砂层概念,开展了测井岩性解释,结果表明该区重力流沉积为细砂岩或粉砂岩,单层平均厚度2.94m,最大厚度可达9.5m,其中单井中厚度在3m以上的砂体可达22层、累积达107.5m。本区重力流沉积为滑塌成因,除了(扇)三角洲前缘斜坡的自然滑塌外,断层(地震)活动或间歇式火山喷发是其关键的触发机制;断层活动除了提供滑塌的动力外,还影响着其堆积场所和沉积的结构。 相似文献
5.
Anna E. Nelson John L. Smellie Michael J. Hambrey Mark Williams Maryline Vautravers Ulrich Salzmann John M. McArthur Marcel Regelous 《Quaternary Science Reviews》2009,28(27-28):3138-3160
Detailed sedimentological and microtextural analyses of newly-discovered late Neogene diamictites and other coarse-grained facies, mostly sandwiched between hyaloclastite of the James Ross Island Volcanic Group and Cretaceous sandstone and mudstone, indicate deposition mainly by glacigenic debris flows. The deposits on James Ross Island (northern Antarctic Peninsula) constrain the depositional setting, ice–bed dynamics and regional palaeoclimate. The sequences on James Ross Island vary in age but are mainly late Miocene and Pliocene. Unlike Neogene sedimentary sequences elsewhere in Antarctica, those on James Ross Island are unusually well-dated by a combination of 40Ar/39Ar and 87Sr/86Sr analyses on fresh interbedded lavas and pristine bivalve molluscs, respectively. The Sr isotopic ages of the debris flows cluster around 4.74, 4.89, 5.44, 5.78, and 6.31 Ma and probably date relatively warm periods in the northern Antarctic Peninsula region, when the bivalves lived under ice-poor or seasonally ice-free conditions. The bivalves are often remarkably well-preserved, lack adhering lithified sediment and, in at least two locations, are large, mainly unfragmented and sometimes articulated, suggesting that they were alive immediately prior to their incorporation in subaqueous debris flows at the margins of an advancing glacier. These fossiliferous glacigenic debris flows signify episodes of ice expansion during relatively warm periods, or “interglacials”, of the late Miocene and Pliocene. The James Ross Island glacigenic sedimentary successions attain thicknesses of up to 150 m and extend over 4 km laterally. The high volume of glacigenic sediment delivery implicit in the James Ross Island successions indicates that a series of dynamic ice fronts crossed the region during the late Miocene and Pliocene epochs. Associated evidence, in the form of clast abrasion (including striations and faceting) and bedrock erosion, is indicative of basal sliding and subglacial sediment deformation active at the ice–bed interface and wet-based temperate or polythermal regimes, prior to remobilisation. The evidence further suggests two local ice caps on James Ross Island during the warm periods, as well as ice-overriding by the Antarctic Peninsula Ice Sheet from the west and northwest. 相似文献
6.
Sedimentology of a lacustrine fan-delta system, Miocene Horse Camp Formation, Nevada, USA 总被引:3,自引:0,他引:3
A 1600-m-thick succession of the Miocene Horse Camp Formation (Member 2) exposed in east-central Nevada records predominantly terrigenous clastic deposition in subaerial and subaqueous fan-delta environments and nearshore and offshore lacustrine environments. These four depositional environments are distinguished by particular associations of individual facies (14 defined facies). Subaerial and subaqueous fan-delta facies associations include: ungraded, matrix-and clast-supported conglomerate; normally graded, matrix- and clast-supported conglomerate; ungraded and normally graded sandstone; and massive to poorly laminated mudstone. Subaqueous fan-delta deposits typically have dewatering structures, distorted bedding and interbedded mudstone. The subaerial fan-delta environment was characterized by debris flows, hyperconcentrated flows and minor sheetfloods; the subaqueous fan-delta environment by debris flows, high- and low-density turbidity currents, and suspension fallout. The nearshore lacustrine facies association provides examples of deposits and processes rarely documented in lacustrine environments. High-energy oscillatory wave currents, probably related to a large fetch, reworked grains as large as 2 cm into horizontally stratified sand and gravel. Offshore-directed currents produced uncommonly large (typically 1–2 m thick) trough cross-stratified sandstone. In addition, stromatolitic carbonate interbedded with stratified coarse sandstone and conglomerate suggests a dynamic environment characterized by episodic terrigenous clastic deposition under high-energy conditions alternating with periods of carbonate precipitation under reduced energy conditions. Massive and normally graded sandstone and massive to poorly laminated mudstone characterize the offshore lacustrine facies association and record deposition by turbidity currents and suspension fallout. A depositional model constructed for the Horse Camp Formation (Member 2) precludes the existence of all four depositional environments at any particular time. Rather, phases characterized by deposition in subaerial fan, nearshore lacustrine and offshore lacustrine environments alternated with phases of subaerial fan-delta, subaqueous fan-delta and offshore lacustrine deposition. This model suggests that high-energy nearshore currents due to deep water along the lake margin reworked sediment of the fan edge, thus preventing development of a subaqueous fan-delta environment and promoting development of a well-defined nearshore lacustrine environment. Low-energy nearshore currents induced by shallow water along the 相似文献
7.
A depositional model for offshore deposits of the lower Blue Gate Member,Mancos Shale,Uinta Basin,Utah, USA
下载免费PDF全文
![点击此处可从《Sedimentology》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Lauren P. Birgenheier Brendan Horton Andrew D. McCauley Cari L. Johnson Angela Kennedy 《Sedimentology》2017,64(5):1402-1438
Depositional models that use heterogeneity in mud‐dominated successions to distinguish and diagnose environments within the offshore realm are still in their infancy, despite significant recent advances in understanding the complex and dynamic processes of mud deposition. Six cored intervals of the main body of the Mancos Shale, the lower Blue Gate Member, Uinta Basin, were examined sedimentologically, stratigraphically and geochemically in order to evaluate facies heterogeneity and depositional mechanisms. Unique sedimentological and geochemical features are used to identify three offshore environments of deposition: the prodelta, the mudbelt and the sediment‐starved shelf. Prodelta deposits consist of interlaminated siltstone and sandstone and exhibit variable and stressed trace fossil assemblages, and indicators of high sedimentation rates. The prodelta was dominated by river‐fed hyperpycnal flow. Mudbelt deposits consist of interlaminated siltstone and sandstone and are characterized by higher bioturbation indices and more diverse trace fossil assemblages. Ripples, scours, truncations and normally graded laminations are abundant in prodelta and mudbelt deposits indicating dynamic current conditions. Mudbelt sediment dispersal was achieved by both combined flow above storm wave base and current‐enhanced and wave‐enhanced sediment gravity flows below storm wave base. Sediment‐starved shelf deposits are dominantly siltstone to claystone with the highest calcite and organic content. Bioturbation is limited to absent. Sediment‐starved shelf deposits were the result of a combination of shelfal currents and hypopycnal settling of sediment. Despite representing the smallest volume, sediment‐starved shelf deposits are the most prospective for shale hydrocarbon resource development, due to elevated organic and carbonate content. Sediment‐starved shelf deposits are found in either retrogradational to aggradational parasequence sets or early distal aggradational to progradational parasequence sets, bounding the maximum flooding surface. An improved framework classification of offshore mudstone depositional processes based on diagnostic sedimentary criteria advances our predictive ability in complex and dynamic mud‐dominated environments and informs resource prospectivity. 相似文献
8.
Bedrock lithology control on contemporaneous alluvial fan facies, Oligo-Miocene, southern Pyrenees, Spain 总被引:1,自引:0,他引:1
Climate and tectonics play important roles in controlling processes of transport and deposition on alluvial fans, but the bedrock lithology in the fan catchment area is also a significant, independent factor. Adjacent Oligo-Miocene alluvial fan deposits on the northern margin of the Ebro Basin display contrasting depositional characteristics with one dominated by the deposits of debris flows and the other by deposition from flows of water. A difference in clast compositions indicates that the two studied fans (the Nueno and San Julián fans) had contrasting bedrock lithology in their drainage basins. The proximal facies of the Nueno fan body contains matrix-supported conglomerate beds with up to 80% pebble clasts of gypsum in a matrix of gypsiferous sand, interbedded with gypsarenite beds. The drainage basin of this fan was dominated by Triassic bedrock consisting of beds of gypsum, marl and micritic limestone. The San Julián fan body comprises clast-supported, polymict conglomerate beds containing pebbles from Triassic, Cretaceous and Palaeogene limestone units that are exposed in the adjacent part of the basin margin. The interfingering of the deposits of these two fans demonstrates that they were contemporaneous. Given the consistent climate, the differences in fan depositional processes must therefore be attributed to the contrasting bedrock lithology in their drainage basins. A drainage basin consisting mainly of marl and gypsum bedrock provided sufficient fine-grained material to generate debris flows, whereas more dilute, water-lain processes dominated where the drainage basin was largely limestone strata. 相似文献
9.
VICTOR B. CHERVEN 《Sedimentology》1984,31(6):823-836
ABSTRACT The early Pleistocene Laguna and Turlock Lake Formations and China Hat and Arroyo Seco Gravels along the east side of the San Joaquin Valley, California, were deposited in alluvial fans and marginal lakes. Upward-coarsening sequences of silt-sand-gravel record westward progradation of glacial outwash fans from the Sierra Nevada into proglacial lakes in the San Joaquin Valley. Distinctive sedimentary features delineate lacustrine, prodelta, and delta-front facies within fan-margin deposits and lower, middle, and upper-fan facies within alluvial-fan deposits. The lacustrine facies consists of a few metres of thinly and evenly bedded, rhythmically laminated claystone and clayey siltstone in varved couplets. Draped lamination, sinusoidal lamination, and load and pillar structures occur in some beds. Siltstone and claystone grade upward to slightly thicker wavy beds of siltstone and very fine-grained unconsolidated sand deposited in a prodelta setting. Convolute laminae within deformed steeply dipping foreset beds suggest slumping on the prodelta slope. The prodelta facies grades up to the delta-front facies, which consists of burrowed and bioturbated cross-bedded fine sand. Deltaic deposits are 5–6 m thick. The lower-fan facies forms the base of the fan sequence and consists of several metres of irregularly bedded, laminated, oxidized siltstone and fine sand. The middle-fan facies consists of cross-bedded, medium-grained to gravelly sand-filled channels cut into the lower-fan facies. Interbedded lens-shaped siltstone beds 2 m thick and several metres across were deposited in abandoned channels. The upper-fan facies consists of moderately to strongly weathered clayey gravel and sand containing pebble imbrication and crude stratification. Argillization during post-depositional soil formation has blurred the distinction between mud-supported debris-flow deposits and clast-supported channel deposits, but both are present in this facies. The deposits described here demonstrate the need for additional fan models in order to incorporate the variety of deposits developed in alluvial fan sequences deposited in humid climates. In previous models based on arctic fans, debris flows, abandoned channels, or widespread siltstone beds are not present in fan sequences, nor are marginal lacustrine and deltaic deposits well represented. 相似文献
10.
PETER J. TALLING LAWRENCE A. AMY RUSSELL B. WYNN CHRISTOPHER J. STEVENSON MICHAEL FRENZ 《Sedimentology》2012,59(6):1850-1887
Current understanding of submarine sediment density flows is based heavily on their deposits, because such flows are notoriously difficult to monitor directly. However, it is rarely possible to trace the facies architecture of individual deposits over significant distances. Instead, bed‐scale facies models that infer the architecture of ‘typical’ deposits encapsulate current understanding of depositional processes and flow evolution. In this study, the distribution of facies in 12 individual beds has been documented along downstream transects over distances in excess of 100 km. These deposits were emplaced in relatively flat basin‐plain settings in the Miocene Marnoso Arenacea Formation, north‐east Italy and the late Quaternary Agadir Basin, offshore Morocco. Statistical analysis shows that the most common series of vertical facies transitions broadly resembles established facies models. However, mapping of individual beds shows that they commonly deviate from generalized models in several important ways that include: (i) the abundance of parallel laminated sand, suggesting deposition of this facies from both high‐density and low‐density turbidity current; (ii) three distinctly different types of grain‐size break, suggesting waxing flow, erosional hiatuses and bypass of silty sediment; (iii) the presence of mud‐rich debrites demonstrating hybrid flow deposition; and (iv) dune‐scale cross‐lamination in fine‐medium grained sandstones. Submarine sediment density flows in basin‐plain settings flow over relatively simple topography. Yet, their deposits record complex flow events, involving transformation between different flow types, rather than the simple waning surges often associated with the distal parts of turbidite systems. 相似文献
11.
Sedimentation and palaeoenvironments of Late Cretaceous crater-lake deposits in Bushmanland, South Africa 总被引:1,自引:0,他引:1
R. M. H. SMITH 《Sedimentology》1986,33(3):369-386
A large diameter borehole core from an epiclastic kimberlite remnant on the farm Stompoor in the Prieska district, Cape Province, contains a continuous 76 m section of fossiliferous sediments interpreted as having accumulated within a crater-lake during the Late Cretaceous. Three distinct facies associations reflect depositional processes that prevailed in offshore areas of the original lake. Facies Association A: matrix-supported pebble conglomerates comprising a chaotic assemblage of pyroclastic, basement and country rocks set in a fine-grained matrix. Flat, non-erosional basal surfaces with ‘frozen’ rip-up clasts, the protrusion of matrix-supported clasts above the upper surfaces and a direct relationship between maximum clast size and bed thickness suggest deposition from debris flows that originated subaerially on pyroclastic talus cones surrounding the crater. Facies Association B: alternating thin beds of matrix-supported granule conglomerate, structureless fine-grained sandstone and parallel laminated mudrock. Small fining-upward sequences within these beds are comparable to turbidite Bouma Tade, Tde. Numerous partings display petrified fish and frog skeletons, as well as bivalve, gastropod and ostracode shells, leaf impressions, insect wings and a possible bird bone. These beds were deposited by thin debris-flows and turbidity underflows interspersed with periods of ‘pelagic’ sedimentation. Facies Association C: microlaminated mudstone beds containing scattered ‘dropstone lapilli’. The lamination is imparted by alternating Ca-rich/Ca-poor layers which may reflect climatic seasonality. They are interpreted as the result of seasonally influenced suspension settling through a thermally stratified water column. Short-term periodicities in conglomerate bed thicknesses are interpreted as the result of successive block caving of a slump scar giving rise to several debris flows from the same source area. Seismic shock from nearby volcanism may have simultaneously triggered slumps on both subaerial and subaqueous slopes. Dropstone lapilli in Type C beds and the preponderance of load casting in Type B beds support this interpretation. An estimate of the time span involved in accumulating 76 m of crater lake sediments based on the possible seasonal imprint of Type C beds gives a figure of some 220,000 yr. 相似文献
12.
可可西里盆地早渐新世雅西措群砂岩极其发育爬升沙纹层理,形成于沉积物来源供给太快太多而不能随流体一起迁移,从而产生向上的加积。雅西措群砂岩主要包括迎水坡侵蚀的A型和迎水坡沉积的B1型两种,其中,A型沙纹层理单个层系厚一般约为2cm,爬升角小于7°;B1型沙纹层单个层系厚一般为4cm,爬升角介于10o~20o之间。这两种爬升沙纹层形成于变速流、非稳定流或变速非稳定流,主要归于砂质碎屑流和底流,平均流速在11~60cm/s之间,堆积速度可以达到0.1g/cm2s,发育于浅湖环境的三角洲前缘沉积。雅西措群爬升沙纹层理发育于青藏高原的早渐新世快速隆升作用和全球变冷变干气候条件下。 相似文献
13.
《Sedimentary Geology》2007,193(1-4):105-129
The blocking of major river valleys in the Leinebergland area by the Early Saalian Scandinavian ice sheet led to the formation of a large glacial lake, referred to as “glacial Lake Leine”, where most of the sediment was deposited by meltwater. At the initial stage, the level of glacial Lake Leine was approx. 110 m a.s.l. The lake level then rose by as much as 100 m to a highstand of approx. 200 m a.s.l.Two genetically distinct ice-margin depositional systems are described that formed on the northern margin of glacial Lake Leine in front of the retreating Scandinavian ice sheet. The Bornhausen delta is up to 15 m thick and characterized by a large-scale tangential geometry with dip angles from 10°–28°, reflecting high-angle foreset deposition on a steep delta slope. Foreset beds consist of massive clast-supported gravel and pebbly sand, alternating with planar-parallel stratified pebbly sand, deposited from cohesionless debris flows, sandy debris flows and high-density turbidity flows. The finer-grained sandy material moved further downslope where it was deposited from low-density turbidity currents to form massive or ripple-cross-laminated sand in the toeset area.The Freden ice-margin depositional system shows a more complex architecture, characterized by two laterally stacked sediment bodies. The lower part of the section records deposition on a subaqueous ice-contact fan. The upper part of the Freden section is interpreted to represent delta-slope deposits. Beds display low- to high-angle bedding (3°–30°) and consist of planar and trough cross-stratified pebbly sand and climbing-ripple cross-laminated sand. The supply of meltwater-transported sediment to the delta slope was from steady seasonal flows. During higher energy conditions, 2-D and 3-D dunes formed, migrating downslope and passing into ripples. During lower-energy flow conditions thick climbing-ripple cross-laminated sand beds accumulated also on higher parts of the delta slope. 相似文献
14.
The Marnoso‐arenacea Formation in the Italian Apennines is the only ancient rock sequence where individual submarine sediment density flow deposits have been mapped out in detail for over 100 km. Bed correlations provide new insight into how submarine flows deposit sand, because bed architecture and sandstone shape provide an independent test of depositional process models. This test is important because it can be difficult or impossible to infer depositional process unambiguously from characteristics seen at just one outcrop, especially for massive clean‐sandstone intervals whose origin has been controversial. Beds have three different types of geometries (facies tracts) in downflow oriented transects. Facies tracts 1 and 2 contain clean graded and ungraded massive sandstone deposited incrementally by turbidity currents, and these intervals taper relatively gradually downflow. Mud‐rich sand deposited by cohesive debris flow occurs in the distal part of Facies tract 2. Facies tract 3 contains clean sandstone with a distinctive swirly fabric formed by patches of coarser and better‐sorted grains that most likely records pervasive liquefaction. This type of clean sandstone can extend for up to 30 km before pinching out relatively abruptly. This abrupt pinch out suggests that this clean sand was deposited by debris flow. In some beds there are downflow transitions from turbidite sandstone into clean debrite sandstone, suggesting that debris flows formed by transformation from high‐density turbidity currents. However, outsize clasts in one particular debrite are too large and dense to have been carried by an initial turbidity current, suggesting that this debris flow ran out for at least 15 km. Field data indicate that liquefied debris flows can sometimes deposit clean sand over large (10 to 30 km) expanses of sea floor, and that these clean debrite sand layers can terminate abruptly. 相似文献
15.
陆源碎屑和碳酸盐岩的混合沉积现象分布广泛,但由于混合沉积的研究起步较晚,且受不同沉积条件的制约,研究相对薄弱。贺兰山地区早古生代发育了陆源碎屑岩和海相碳酸盐岩的混合沉积建造,目前国内外学者对贺兰山地区的混合沉积现象的研究至今没有涉及。研究区早古生代混合沉积狭义上表现为混积岩,主要类型包括:泥质灰岩、含泥灰岩、灰质砾岩、灰质粉砂岩;广义上表现为混积层系,主要类型包括:陆源碎屑岩-碳酸盐岩、混积岩-陆源碎屑岩、混积岩-碳酸盐岩。本文从沉积相变关系、区域地层间接触关系、残余地层展布、物源分析等方面对研究区下古生界混合沉积特征进行了较为深入的探讨,研究区寒武纪和奥陶纪表现出了截然不同的混合沉积样式:寒武纪为"拼贴式"混合沉积,而奥陶纪为渐变式混合沉积。板块运动、全球海平面变化、陆源碎屑物质的供给等因素共同控制了研究区早古生代混合沉积的形成。从研究区早古生代不同时期特有的沉积样式人手,分析了研究区早古生代盆地类型及演化。研究区早古生代经历了寒武纪大洋和克拉通盆地共存-早奥陶世的局限克拉通盆地-中、晚奥陶世的前陆盆地雏形这样一个演化过程。 相似文献
16.
Deep-water gravity flows are one of the most important sediment transport mechanisms on Earth. After 60 years of study,significant achievements have been made in terms of classification schemes,genetic mechanisms,and depositional models of deep-water gravity flows. The research history of deep-water gravity flows can be divided into five stages: incipience of turbidity current theory; formation of turbidity current theory; development of deep-water gravity flow theory; improvement and perfection of deep-water gravity flow theory; and comprehensive development of deep-water gravity flow theory. Currently,three primary classification schemes based on the sediment support mechanism,the rheology and transportation process,and the integration of sediment support mechanisms,rheology,sedimentary characteristics,and flow state are commonly used.Different types of deep-water gravity flow events form different types of gravity flow deposits. Sediment slump retransportation mainly forms muddy debris flows,sandy debris flows,and surge-like turbidity currents. Resuspension of deposits by storms leads to quasi-steady hyperpycnal turbidity currents(hyperpycnal flows). Sustainable sediment supplies mainly generate muddy debris flows,sandy debris flows,and hyperpycnal flows. Deep-water fans,which are commonly controlled by debris flows and hyperpycnal flows,are triggered by sustainable sediment supply; in contrast,deep-water slope sedimentary deposits consist mainly of debris flows that are triggered by the retransportation of sediment slumps and deep-water fine-grained sedimentary deposits are derived primarily from finegrained hyperpycnal flows that are triggered by the resuspension of storm deposits. Harmonization of classification schemes,transformation between different types of gravity flow deposit,and monitoring and reproduction of the sedimentary processes of deep-water gravity flows as well as a source-to-sink approach to document the evolution and deposition of deep-water gravity flows are the most important research aspects for future studies of deep-water gravity flows study in the future. 相似文献
17.
塔里木盆地苏盖特布拉克地区下寒武统肖尔布拉克组发育较为典型的风暴岩。风暴沉积标志主要有冲刷充填构造、风暴砾屑层和丘状交错层理等。在野外实测和室内薄片观察基础上,依据风暴沉积物、沉积位置和沉积标志组合的不同,划分出5种风暴沉积序列。序列Ⅰ为mm级或cm级的递变纹层,截切深水微生物礁,为风暴浪基面以下的深水陆棚远源风暴浊流沉积;序列Ⅱ发育异地型风暴砾屑、粒序段、平行纹层段和水平层理黑色钙质页岩,为风暴浪基面与晴天浪基面之间的缓斜坡下部沉积;序列Ⅲ为风暴成因的生屑、砾屑与平行纹层、丘状纹层的组合,多出现在风暴浪基面与晴天浪基面之间的缓斜坡上部;序列Ⅳ以渠模与复合丘状交错层理的组合为特征,为水体较浅的晴天浪基面附近的沉积;序列Ⅴ由风暴砂砾屑及沉积充填构造、平行纹层段组成,上部单元为正常天气沉积的蓝细菌礁滩垮塌体,为晴天浪基面以上的台地边缘礁滩前缘沉积。风暴层序自下而上的沉积环境演化为深水陆棚→浅水陆棚缓斜坡下部→缓斜坡上部→台地边缘前缘,形成向上变浅沉积特征。风暴岩的发现和研究,对于塔里木早寒武世古纬度与古板块演化、古地理及沉积学研究具有重要意义。 相似文献
18.
Coarse-grained submarine fan and slope apron deposits in a Cretaceous back-arc basin, Antarctica 总被引:1,自引:0,他引:1
J. R. INESON 《Sedimentology》1989,36(5):793-819
The Cretaceous of west James Ross Island, Antarctica represents the proximal fill of a late Mesozoic back-arc basin that was probably initiated by oblique extension during the early development of the Weddell Sea. The succession records sedimentation in two contrasting depositional systems: a laterally persistent slope apron flanking the faulted basin margin interrupted both spatially and temporally by coarse-grained submarine fans. Slope apron deposits are dominated by thinly interbedded turbiditic sandstones and mudstones (mudstone association), interspersed with non-channelized chaotic boulder beds, intraformational slump sheets and isolated exotic blocks representing a spectrum of mass-flow processes from debris flow to submarine gliding. Localized sand-rich sequences (sandstone-breccia association) represent sandy debris lobes at the mouths of active slope chutes. The submarine fan sediments (conglomerate association) are typified by coarse conglomerates and pebbly sandstones, interpreted as the deposits of high-density turbidity currents and non-cohesive debris flows. Three assemblages are recognized and are suggested to represent components of the inner channelled zone of coarse-grained submarine fans, from major fan channels through ephemeral, marginal channels or terraces to levee or interchannel environments. The occurrence of both slope apron and submarine fan depositional systems during the Early and Mid-Cretaceous is attributed to localized input of coarse arc-derived sediment along a tectonically active basin margin. Periods of extensive fan development were probably linked to regional tectonic uplift and rejuvenation of the arc source region; cyclicity within individual fan sequences is attributed to migration or switching of fan channels or canyons. Slope apron sedimentation was controlled largely by intrabasinal tectonics. Local unconformities and packets of amalgamated slide sheets and debris flow deposits probably reflect episodic movement on basin margin faults. Differential subsidence across the basin margin anchored the basin slope for at least 20 Myr and precluded basinward progradation of shallow marine environments. 相似文献
19.
《Sedimentology》2018,65(3):809-841
Degradation of basin‐margin clinothems around the shelf‐edge rollover zone may lead to the generation of conduits through which gravity flows transport sediment downslope. Many studies from seismic‐reflection data sets show these features, but they lack small‐scale (centimetre to metre) sedimentary and stratigraphic observations on process interactions. Exhumed basin‐margin clinothems in the Tanqua depocentre (Karoo Basin) provide seismic‐reflection‐scale geometries and internal details of architecture with depositional dip and strike control. At the Geelhoek locality, clinothem parasequences comprise siltstone‐rich offshore deposits overlain by heterolithic prodelta facies and sandstone‐dominated deformed mouth bars. Three of these parasequences are truncated by a steep (6 to 22°), 100 m deep and 1·5 km wide asymmetrical composite erosion surface that delineates a shelf‐incised canyon. The fill, from base to top comprises: (i) thick‐bedded sandstone with intrabasinal clasts and multiple erosion surfaces; (ii) scour‐based interbedded sandstone and siltstone with tractional structures; and (iii) inverse‐graded to normal‐graded siltstone beds. An overlying 55 m thick coarsening‐upward parasequence fills the upper section of the canyon and extends across its interfluves. Younger parasequences display progressively shallower gradients during progradation and healing of the local accommodation. The incision surface resulted from initial oversteepening and high sediment supply triggering deformation and collapse at the shelf edge, enhanced by a relative sea‐level fall that did not result in subaerial exposure of the shelf edge. Previous work identified an underlying highly incised, sandstone‐rich shelf‐edge rollover zone across‐margin strike, suggesting that there was migration in the zone of shelf edge to upper‐slope incision over time. This study provides an unusual example of clinothem degradation and readjustment with three‐dimensional control in an exhumed basin‐margin succession. The work demonstrates that large‐scale erosion surfaces can develop and migrate due to a combination of factors at the shelf‐edge rollover zone and proposes additional criteria to predict clinothem incision and differential sediment bypass in consistently progradational systems. 相似文献
20.
During the deposition of the Chang-7 (Ch-7) and Chang-6 (Ch-6) units in the Upper Triassic, gravity flows were developed widely in a deep lake in the southwestern Ordos Basin, China. Based on cores, outcrops, well-logs and well-testing data, this paper documents the sedimentary characteristics of the gravity-flow deposits and constructs a depositional model. Gravity-flow deposits in the study area comprise seven lithofacies types, which are categorised into four groups: slides and slumps, debris-flow-dominated lithofacies, turbidity-current-dominated lithofacies, and deep-water mudstone-dominated lithofacies. The seven lithofacies form two sedimentary entities: sub-lacustrine fan and the slump olistolith, made up of three and two lithofacies associations, respectively. Lithofacies association 1 is a channel–levee complex with fining-/thinning-upward sequences whose main part is characterised by sandy debris flow-dominated, thick-bedded massive sandstones. Lithofacies association 2 represents distributary channelised lobes of sub-lacustrine fans, which can be further subdivided into distributary channel, channel lateral margin and inter-channel. Lithofacies association 3 is marked by non-channelised lobes of sub-lacustrine fans, including sheet-like turbidites and deep-lake mudstones. Lithofacies association 4 is represented by proximal lobes of slump olistolith, consisting of slides and slumps. Lithofacies association 5 is marked by distal lobes of slump olistolith, comprising tongue-shaped debris flow lobes and turbidite lobes. It is characterised by sandy debris flow, muddy debris flow-dominated sandstone and sandstone with classic Bouma sequences. Several factors caused the generation of gravity flows in the Ordos Basin, including sediment supply, terrain slope and external triggers, such as volcanisms, earthquakes and seasonal floods. The sediment supply of sub-lacustrine fan was most likely from seasonal floods with a high net-to-gross and incised channels. Triggered by volcanisms and earthquakes, the slump olistolith is deposited by the slumping and secondary transport of unconsolidated sediments in the delta front or prodelta with a low net-to-gross and no incised channels. 相似文献