Constraining the Kinematics of Coronal Mass Ejections in the Inner Heliosphere with In-Situ Signatures

We present a new approach to combine remote observations and in-situ data by STEREO/HI and Wind, respectively, to derive the kinematics and propagation directions of interplanetary coronal mass ejections (ICMEs). We use two methods, Fixed-? (F?) and Harmonic Mean (HM), to convert ICME elongations into distance, and constrain the ICME direction such that the ICME distance–time and velocity–time profiles are most consistent with in-situ measurements of the arrival time and velocity. The derived velocity–time functions from the Sun to 1?AU for the three events under study (1?–?6 June 2008, 13?–?18 February 2009, 3?–?5 April 2010) do not show strong differences for the two extreme geometrical assumptions of a wide ICME with a circular front (HM) or an ICME of small spatial extent in the ecliptic (F?). Due to the geometrical assumptions, HM delivers the propagation direction further away from the observing spacecraft with a mean difference of ≈?25°.     

The Relationship of Green-Line Transients to White-Light Coronal Mass Ejections

We report observations by the Large Angle Spectrometric Coronagraph (LASCO) on the SOHO spacecraft of three coronal green-line transients that could be clearly associated with coronal mass ejections (CMEs) detected in Thomson-scattered white light. Two of these events, with speeds >25 km s^-1, may be classified as ‘whip-like’ transients. They are associated with the core of the white-light CMEs, identified with erupting prominence material, rather than with the leading edge of the CMEs. The third green-line transient has a markedly different appearance and is more gradual than the other two, with a projected outward speed <10 km s^-1. This event corresponds to the leading edge of a ‘streamer blowout’ type of CME. A dark void is left behind in the emission-line corona following each of the fast eruptions. Both fast emission-line transients start off as a loop structure rising up from close to the solar surface. We suggest that the driving mechanism for these events may be the emergence of new bipolar magnetic regions on the surface of the Sun, which destabilize the ambient corona and cause an eruption. The possible relationship of these events to recent X-ray observations of CMEs is briefly discussed. Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1004981125702     

A Quick Method for Estimating the Propagation Direction of Coronal Mass Ejections Using STEREO-COR1 Images

We describe here a method to obtain the position of a coronal moving feature in a three-dimensional coordinate system based on height – time measurements applied to STEREO data. By using the height – time diagrams from the two SECCHI-COR1 coronagraphs onboard STEREO, one can easily determine the direction of propagation of a coronal mass ejection (i.e., if the moving plasma is oriented toward or away from the Earth). This method may prove to be a useful tool for space weather forecasting by easily identifying the direction of propagation as well as the real speed of the coronal mass ejections.     

Using an Ellipsoid Model to Track and Predict the Evolution and Propagation of Coronal Mass Ejections

We present a method for tracking and predicting the propagation and evolution of coronal mass ejections (CMEs) using the imagers on the STEREO and SOHO satellites. By empirically modeling the material between the inner core and leading edge of a CME as an expanding, outward propagating ellipsoid, we track its evolution in three-dimensional space. Though more complex empirical CME models have been developed, we examine the accuracy of this relatively simple geometric model, which incorporates relatively few physical assumptions, including i) a constant propagation angle and ii) an azimuthally symmetric structure. Testing our ellipsoid model developed herein on three separate CMEs, we find that it is an effective tool for predicting the arrival of density enhancements and the duration of each event near 1 AU. For each CME studied, the trends in the trajectory, as well as the radial and transverse expansion are studied from 0 to ～0.3 AU to create predictions at 1 AU with an average accuracy of 2.9 hours.     

The Interaction of Successive Coronal Mass Ejections: A Review

We present a review of the different aspects associated with the interaction of successive coronal mass ejections (CMEs) in the corona and inner heliosphere, focusing on the initiation of series of CMEs, their interaction in the heliosphere, the particle acceleration associated with successive CMEs, and the effect of compound events on Earth’s magnetosphere. The two main mechanisms resulting in the eruption of series of CMEs are sympathetic eruptions, when one eruption triggers another, and homologous eruptions, when a series of similar eruptions originates from one active region. CME?–?CME interaction may also be associated with two unrelated eruptions. The interaction of successive CMEs has been observed remotely in coronagraphs (with the Large Angle and Spectrometric Coronagraph Experiment – LASCO – since the early 2000s) and heliospheric imagers (since the late 2000s), and inferred from in situ measurements, starting with early measurements in the 1970s. The interaction of two or more CMEs is associated with complex phenomena, including magnetic reconnection, momentum exchange, the propagation of a fast magnetosonic shock through a magnetic ejecta, and changes in the CME expansion. The presence of a preceding CME a few hours before a fast eruption has been found to be connected with higher fluxes of solar energetic particles (SEPs), while CME?–?CME interaction occurring in the corona is often associated with unusual radio bursts, indicating electron acceleration. Higher suprathermal population, enhanced turbulence and wave activity, stronger shocks, and shock?–?shock or shock?–?CME interaction have been proposed as potential physical mechanisms to explain the observed associated SEP events. When measured in situ, CME?–?CME interaction may be associated with relatively well organized multiple-magnetic cloud events, instances of shocks propagating through a previous magnetic ejecta or more complex ejecta, when the characteristics of the individual eruptions cannot be easily distinguished. CME?–?CME interaction is associated with some of the most intense recorded geomagnetic storms. The compression of a CME by another and the propagation of a shock inside a magnetic ejecta can lead to extreme values of the southward magnetic field component, sometimes associated with high values of the dynamic pressure. This can result in intense geomagnetic storms, but can also trigger substorms and large earthward motions of the magnetopause, potentially associated with changes in the outer radiation belts. Future in situ measurements in the inner heliosphere by Solar Probe+ and Solar Orbiter may shed light on the evolution of CMEs as they interact, by providing opportunities for conjunction and evolutionary studies.     

Observations of Coronal Mass Ejections with the Coronal Multichannel Polarimeter

The Coronal Multichannel Polarimeter (CoMP) measures not only the polarization of coronal emission, but also the full radiance profiles of coronal emission lines. For the first time, CoMP observations provide high-cadence image sequences of the coronal line intensity, Doppler shift, and line width simultaneously over a large field of view. By studying the Doppler shift and line width we may explore more of the physical processes of the initiation and propagation of coronal mass ejections (CMEs). Here we identify a list of CMEs observed by CoMP and present the first results of these observations. Our preliminary analysis shows that CMEs are usually associated with greatly increased Doppler shift and enhanced line width. These new observations provide not only valuable information to constrain CME models and probe various processes during the initial propagation of CMEs in the low corona, but also offer a possible cost-effective and low-risk means of space-weather monitoring.     

The Depiction of Coronal Structure in White-Light Images

The very steep decrease in density with heliocentric distance makes imaging of coronal density structures out to a few solar radii challenging. The radial gradient in brightness can be reduced using numerous image processing techniques, thus quantitative data are manipulated to provide qualitative images. We introduce a new normalizing-radial-graded filter (NRGF): a simple filter for removing the radial gradient to reveal coronal structure. Applied to polarized brightness observations of the corona, the NRGF produces images which are striking in their detail. Total-brightness, white-light images include contributions from the F corona, stray light, and other instrumental contributions which need to be removed as effectively as possible to properly reveal the electron corona structure. A new procedure for subtracting this background from LASCO C2 white-light, total-brightness images is introduced. The background is created from the unpolarized component of total-brightness images and is found to be remarkably time-invariant, remaining virtually unchanged over the solar cycle. By direct comparison with polarized-brightness data, we show that the new background-subtracting procedure is superior in depicting coronal structure accurately, particularly when used in conjunction with the NRGF. The effectiveness of the procedures is demonstrated on a series of LASCO C2 observations of a coronal mass ejection (CME).     

Distributions of Energy and Mass of Coronal Mass Ejections

The present study investigates the energy and mass distributions of all (11 322) coronal mass ejections (CMEs), 1406 CMEs associated solely with flares (FL CMEs), and 325 CMEs associated solely with filament eruptions (FE CMEs), all of which were observed by the Large Angle and Spectrometric Coronagraph on board the Solar and Heliospheric Observatory (SOHO/LASCO) from January 1996 to December 2009. The results show the following. i) The mean energy of FL CMEs is significantly lower than that of all CMEs. The mean energy of FE CMEs is significantly higher than those of FL CMEs and all CMEs. ii) The mean mass of FL CMEs is slightly larger than that of all CMEs. The mean mass of FE CMEs is significantly larger than those of FL CMEs and all CMEs. Our results suggest that CMEs should shed excess helicity stored in the corona and that the magnetic complexity determines the likelihood of CMEs.     

Connecting Coronal Mass Ejections and Magnetic Clouds: A Case Study Using an Event from 22 June 2009

Solar Physics - On 27 June 2009 the Wind and Advanced Composition Explorer (ACE) spacecraft near Earth detected a magnetic cloud (MC). The MC can be traced back to a slow coronal mass ejection...     

Forward Modeling of Coronal Mass Ejections Using STEREO/SECCHI Data

We describe a forward modeling method developed to study the coronal mass ejections observed with STEREO/SECCHI. We present a survey of 26 CMEs modeled with this method. We selected most of the bright events observed since November 2007 to August 2008, after when the separation was greater than 40° degrees, thus showing noticeable differences between the two views. From these stereoscopic observations and using a geometric model of a flux rope, we are able to determine the three-dimensional direction of propagation, the three-dimensional velocity and acceleration of the CME front, and in most of the cases the flux rope orientation and length. We define a merit function that allows us to partially automate the fit, as well as perform a sensitivity analysis on the model parameters. We find a precision on the longitude and latitude to be of a maximum of ±17° and ±4°, respectively, for a 10% decrease of the merit function but a precision on the flux rope orientation and length to be almost one order of magnitude larger, showing that these parameters are more difficult to estimate using only coronagraph data. Finally, comparison with independent measurements shows a good agreement with the direction and speed we estimated.     

Three-Dimensional Reconstruction of Two Solar Coronal Mass Ejections Using the STEREO Spacecraft

Previous attempts to produce three-dimensional (3-D) reconstructions of coronal mass ejections (CMEs) have required either modeling efforts or comparisons with secondary associated eruptions near the solar surface. This is because coronagraphs are only able to produce sky-plane-projected images of CMEs and it has hence been impossible to overcome projection effects by using coronagraphs alone. The SECCHI suite aboard the twin STEREO spacecraft allows us to provide the means for 3-D reconstruction of CMEs directly from coronagraph measurements alone for the first time. We present these measurements from two CMEs observed in November 2007. By identifying common features observed simultaneously with the LASCO coronagraphs aboard SOHO and the COR coronagraphs aboard STEREO we have triangulated the source region of both CMEs. We present the geometrical analysis required for this triangulation and identify the location of the CME in solar-meridional, ecliptic, and Carrington coordinates. None of the two events were associated with an easily detectable solar surface eruption, so this triangulation technique is the only means by which the source location of these CMEs could be identified. We present evidence that both CMEs originated from the same magnetic structure on the Sun, but from a different magnetic field configuration. Our results reveal some insight into the evolution of the high corona magnetic field, including its behavior over time scales of a few days and its reconfiguration after a major eruption.     

On the Collision Nature of Two Coronal Mass Ejections: A Review

Observational and numerical studies have shown that the kinematic characteristics of two or more coronal mass ejections (CMEs) may change significantly after a CME collision. The collision of CMEs can have a different nature, i.e. inelastic, elastic, and superelastic processes, depending on their initial kinematic characteristics. In this article, we first review the existing definitions of collision types including Newton’s classical definition, the energy definition, Poisson’s definition, and Stronge’s definition, of which the first two were used in the studies of CME–CME collisions. Then, we review the recent research progresses on the nature of CME–CME collisions with the focus on which CME kinematic properties affect the collision nature. It is shown that observational analysis and numerical simulations can both yield an inelastic, perfectly inelastic, merging-like collision, or a high possibility of a superelastic collision. Meanwhile, previous studies based on a 3D collision picture suggested that a low approaching speed of two CMEs is favorable for a superelastic nature. Since CMEs are an expanding magnetized plasma structure, the CME collision process is quite complex, and we discuss this complexity. Moreover, the models used in both observational and numerical studies contain many limitations. All of the previous studies on collisions have not shown the separation of two colliding CMEs after a collision. Therefore the collision between CMEs cannot be considered as an ideal process in the context of a classical Newtonian definition. In addition, many factors are not considered in either observational analysis or numerical studies, e.g. CME-driven shocks and magnetic reconnections. Owing to the complexity of the CME collision process, a more detailed and in-depth observational analysis and simulation work are needed to fully understand the CME collision process.     

Radial Speed Evolution of Interplanetary Coronal Mass Ejections During Solar Cycle 23

We report radial-speed evolution of interplanetary coronal mass ejections (ICMEs) detected by the Large Angle and Spectrometric Coronagraph onboard the Solar and Heliospheric Observatory (SOHO/LASCO), interplanetary scintillation (IPS) at 327 MHz, and in-situ observations. We analyze solar-wind disturbance factor (g-value) data derived from IPS observations during 1997?–?2009 covering nearly the whole period of Solar Cycle 23. By comparing observations from SOHO/LASCO, IPS, and in situ, we identify 39 ICMEs that could be analyzed carefully. Here, we define two speeds [V _SOHO and V _bg], which are the initial speed of the ICME and the speed of the background solar wind, respectively. Examinations of these speeds yield the following results: i) Fast ICMEs (with V _SOHO?V _bg>500 km?s^?1) rapidly decelerate, moderate ICMEs (with 0 km?s^?1≤V _SOHO?V _bg≤500 km?s^?1) show either gradually decelerating or uniform motion, and slow ICMEs (with V _SOHO?V _bg<0 km?s^?1) accelerate. The radial speeds converge on the speed of the background solar wind during their outward propagation. We subsequently find; ii) both the acceleration and the deceleration are nearly complete by 0.79±0.04 AU, and those are ended when the ICMEs reach a 480±21 km?s^?1. iii) For ICMEs with (V _SOHO?V _bg)≥0 km?s^?1, i.e. fast and moderate ICMEs, a linear equation a=?γ ₁(V?V _bg) with γ ₁=6.58±0.23×10^?6 s^?1 is more appropriate than a quadratic equation a=?γ ₂(V?V _bg)|V?V _bg| to describe their kinematics, where γ ₁ and γ ₂ are coefficients, and a and V are the acceleration and speed of ICMEs, respectively, because the χ ² for the linear equation satisfies the statistical significance level of 0.05, while the quadratic one does not. These results support the assumption that the radial motion of ICMEs is governed by a drag force due to interaction with the background solar wind. These findings also suggest that ICMEs propagating faster than the background solar wind are controlled mainly by the hydrodynamic Stokes drag.     

Automatic Detection and Classification of Coronal Mass Ejections

We present an automatic algorithm to detect, characterize, and classify coronal mass ejections (CMEs) in Large Angle Spectrometric Coronagraph (LASCO) C2 and C3 images. The algorithm includes three steps: (1) production running difference images of LASCO C2 and C3; (2) characterization of properties of CMEs such as intensity, height, angular width of span, and speed, and (3) classification of strong, median, and weak CMEs on the basis of CME characterization. In this work, image enhancement, segmentation, and morphological methods are used to detect and characterize CME regions. In addition, Support Vector Machine (SVM) classifiers are incorporated with the CME properties to distinguish strong CMEs from other weak CMEs. The real-time CME detection and classification results are recorded in a database to be available to the public. Comparing the two available CME catalogs, SOHO/LASCO and CACTus CME catalogs, we have achieved accurate and fast detection of strong CMEs and most of weak CMEs.     

Radio Emission of Flares and Coronal Mass Ejections

We review recent progress on our understanding of radio emission from solar flares and coronal mass ejections (CMEs) with emphasis on those aspects of the subject that help us address questions about energy release and its properties, the configuration of flare?–?CME source regions, coronal shocks, particle acceleration and transport, and the origin of solar energetic particle (SEP) events. Radio emission from electron beams can provide information about the electron acceleration process, the location of injection of electrons in the corona, and the properties of the ambient coronal structures. Mildly relativistic electrons gyrating in the magnetic fields of flaring loops produce radio emission via the gyrosynchrotron mechanism, which provides constraints on the magnetic field and the properties of energetic electrons. CME detection at radio wavelengths tracks the eruption from its early phase and reveals the participation of a multitude of loops of widely differing scale. Both flares and CMEs can ignite shock waves and radio observations offer the most robust tool to study them. The incorporation of radio data into the study of SEP events reveals that a clear-cut distinction between flare-related and CME-related SEP events is difficult to establish.     

Study of Multiple Coronal Mass Ejections at Solar Minimum Conditions

Solar activity alternates between active and quiet phases with an average period of 11?years, and this is known as the Schwabe cycle. Additionally, solar activity occasionally falls into a prolonged quiet phase (grand solar minimum), as represented by the Maunder Minimum in the 17th century, when sunspots were almost absent for 70?years and the length of the Schwabe cycle increased to 14?years. To examine the consistency of the cycle length characteristics during the grand solar minima, the carbon-14 contents in single-year tree rings were measured using an accelerator mass spectrometer as an index of the solar variability during the grand solar minimum of the 4th century BC. The signal of the Schwabe cycle was detected with a statistical confidence level of higher than 95?% by wavelet analysis. This is the oldest evidence for the Schwabe cycle at the present time, and the cycle length is considered to have increased to approximately 16?years during the grand solar minimum of the 4th century BC. This result confirms the association between the increase of the Schwabe cycle length and the weakening of solar activity, and indicates the possible prolonged absence of sunspots in the 4th century BC as during the Maunder Minimum. Theoretical implications from solar dynamo theory are discussed in order to identify the trigger of prolonged sunspot absence. A possible association between the long-term solar variation around the 4th century BC and terrestrial cooling in this period is also discussed.     

Development of Coronal Mass Ejections: Radio Shock Signatures

We present observational imaging evidence for the existence of metric radio bursts closely associated with the front edge of coronal mass ejections (CMEs). These radio bursts drift in frequency similarly to type II bursts. They are weak and usually go undetected on spectrograph data. We find the same measured projected velocity for the displacement of, respectively, the radio source (when observed at two or more frequencies) and the CME leading edge. The position of the emitting source coincides with the CME leading edge. Among the events analyzed, the fastest of them, with a velocity over 1400 km s-1, was associated with interplanetary type II bursts.