A nonlinear macroelement model for the seismic analysis of masonry buildings

The macroelement technique for modelling the nonlinear response of masonry panels is particularly efficient and suitable for the analysis of the seismic behaviour of complex walls and buildings. The paper presents a macroelement model specifically developed for simulating the cyclic in‐plane response of masonry walls, with possible applications in nonlinear static and dynamic analysis of masonry structures. The model, starting from a previously developed macroelement model, has been refined in the representation of flexural–rocking and shear damage modes, and it is capable of fairly simulating the experimental response of cyclic tests performed on masonry piers. By means of two internal degrees of freedom, the two‐node macroelement permits to represent the coupling of axial and flexural response as well as the interaction of shear and flexural damage. Copyright © 2013 John Wiley & Sons, Ltd.     

A macro‐model with nonlinear springs for seismic analysis of URM buildings

Seismic assessment of existing unreinforced masonry buildings represents a current challenge in structural engineering. Many historical masonry buildings in earthquake regions were not designed to withstand seismic loading; thus, these structures often do not meet the basic safety requirements recommended by current seismic codes and need to be strengthened considering the results from realistic structural analysis. This paper presents an efficient modelling strategy for representing the nonlinear response of unreinforced masonry components under in‐plane cyclic loading, which can be used for practical and accurate seismic assessment of masonry buildings. According to the proposed strategy, generic masonry perforated walls are modelled using an equivalent frame approach, where each masonry component is described utilising multi‐spring nonlinear elements connected by rigid links. When modelling piers and spandrels, nonlinear springs are placed at the two ends of the masonry element for describing the flexural behaviour and in the middle for representing the response in shear. Specific hysteretic rules allowing for degradation of stiffness and strength are then used for modelling the member response under cyclic loading. The accuracy and the significant potential of the proposed modelling approach are shown in several numerical examples, including comparisons against experimental results and the nonlinear dynamic analysis of a building structure. Copyright © 2016 John Wiley & Sons, Ltd.     

高层钢结构基于均匀损伤设计的整体抗震能力提高方法

本文主要研究如何通过合理设计来提高高层钢结构的整体抗震能力。首先,给出了高层钢结构的非线性计算模型;其次,建立了高层钢结构在强地震动作用下的倒塌失效模式的极限状态判别准则;然后,通过模态pushover分析,研究了高层钢结构在水平地震作用下的损伤规律;最后,重点研究了高层钢结构的整体抗震能力的提高方法,提出了均匀损伤的设计方法,该方法通过消除结构的薄弱层,来达到提高高层钢结构的整体抗震能力的目的。通过对两栋20层的高层钢框架结构进行极限时程分析和极限pushover分析,验证了文中提出的均匀损伤的设计方法的可行性。本文的工作可为高层钢结构的抗地震倒塌设计提供参考依据。     

水平成层均质土地震反应非线性分析的半解析算法

采用动态应力-应变关系及其推广的Masing加卸载准则,考虑土体在地震等不规则加载条件下的非线性滞回特征,将增量法与相应场地地震线性反应解析解相结合,提出了该动力非线性方程的半解析时域算法,以水平成层场地一维剪切梁模型为例,建立了求解土体地震反应的非线性分析技术。针对Seed-Idriss给出的砂土平均曲线,分析计算了非均匀层状密砂的线性和非线性地震反应。     

Modified consecutive modal pushover procedure for seismic investigation of one-way asymmetric-plan tall buildings

The effects of higher modes and torsion have a significant impact on the seismic responses of asymmetric-plan tall buildings.A consecutive modal pushover(CMP) procedure is one of the pushover methods that have been developed to consider these effects.The aim of this paper is to modify the(CMP) analysis procedure to estimate the seismic demands of one-way asymmetric-plan tall buildings with dual systems.An analysis of 10-,15-and 20-story asymmetric-plan buildings is carried out,and the results from the modified consecutive modal pushover(MCMP) procedure are compared with those obtained from the modal pushover analysis(MPA) procedure and the nonlinear time history analysis(NLTHA).The MCMP estimates of the seismic demands of one-way asymmetric-plan buildings demonstrate a reasonable accuracy,compared to the results obtained from the NLTHA.Furthermore,the accuracy of the MCMP procedure in the prediction of plastic hinge rotations is better than the MPA procedure.The new pushover procedure is also more accurate than the FEMA load distribution and the MPA procedure.     

Recent progress of seismic research on tall buildings in China Mainland

To study the seismic behavior of high strength concrete fi lled double-tube(CFDT) columns,each consisting of an external square steel tube and an internal circular steel tube,quasi-static tests on eight CFDT column specimens were conducted.The test variables included the width-to-thickness ratio(β1) and the area ratio(β2) of the square steel tube,the wall thickness of the circular steel tube,and the axial force(or the axial force ratio) applied to the CFDT columns.The test results indicate that for CFDT columns with a square steel tube with β1 of 50.1 and 24.5,local buckling of the specimen was found at a drift ratio of 1/150 and 1/50,respectively.The lateral force-displacement hysteretic loops of all specimens were plump and stable.Reducing the width-to-thickness ratio of the square steel tube,increasing its area ratio,or increasing the wall thickness of the internal circular steel tube,led to an increased fl exural strength and deformation capacity of the specimens.Increasing the design value of the axial force ratio from 0.8 to 1.0 may increase the fl exural strength of the specimens,while it may also decrease the ultimate deformation capacity of the specimen with β1 of 50.1.     

Enhanced nonlinear static analysis with the drift pushover procedure for tall buildings

In this study a new method for nonlinear static analysis based on the relative displacements of stories is proposed that is able to be implemented in a single stage analysis and considers the effects of an arbitrary number of higher modes. The method is called the extended drift pushover analysis procedure (EDPA). To define the lateral load pattern, values of the relative displacements of stories are calculated using the elastic modal analysis and the modal combination factors introduced. For determining the combination factors, six different approaches are examined. Buildings evaluated in this study consist of four special steel moment-resisting frames with 10–30 stories. Responses including relative displacements of stories, story shear forces and rotation of plastic hinges in each story are calculated using the proposed approaches in addition to modal pushover analysis and nonlinear dynamic time history analyses. The nonlinear dynamic analysis is implemented using ten consistent earthquake records that have been scaled with regard to ASCE7-10. Distribution of response errors of story shears and plastic hinge rotations show that a major part of error corresponds to the second half of the buildings studied. Thus, the mentioned responses are corrected systematically. The final results of this study show that implementing the EDPA procedure using the third approach of this research is able to effectively overcome the limitations of both the traditional and the modal pushover analyses methods and predict the seismic demands of tall buildings with good accuracy.     

Recent progress of seismic research on tall buildings in China Mainland

As a result of rapid economic growth and urbanization in the past two decades,many tall buildings have been constructed in China Mainland,offering researchers and practitioners an excellent opportunity for research and practice in the field of structural engineering. This paper reviews progress by researchers throughout China Mainland on the seismic research of tall buildings,focusing on three major topics that impact the seismic performance of tall buildings. These are:(1) new types of steel-concrete composite structural members such as steel-concrete composite shear walls and columns,(2) earthquake resilient shear wall structures such as shear walls with replaceable structural components,self-centering shear walls and rocking walls,and(3) performance-based seismic design,including seismic performance index,performance level and design method. The paper concludes by presenting future research needs and directions in this field.     

Decentralized damage diagnostic technique for tall buildings using VARMAX model

Civil infrastructure,especially buildings,are becoming more slender,tall,and multipurpose,creating a need to continuously monitor their health to ensure the safety and security of human lives and assets.While the majority of structural health monitoring techniques use measurements from the entire structure,in this study,an output-only damage diagnostic technique using a decentralized concept(subdomain-based) for tall buildings and employing a vector form of the autoregressive moving average with...     

Response of tall cantilever wall buildings to strong pulse type seismic excitation

This paper investigates the seismic response of tall cantilever wall buildings subjected to pulse type ground motion, with special focus on the relation between the characteristics of ground motion and the higher‐modes of response. Buildings 10, 20, and 40 stories high were designed such that inelastic deformation was concentrated at a single flexural plastic hinge at their base. Using nonlinear response history analysis, the buildings were subjected to near‐fault seismic ground motions and simple closed‐form pulses, which represented distinct pulses within the ground motions. Euler–Bernoulli beam models with lumped mass and lumped plasticity were used to model the buildings. The response of the buildings to the closed‐form pulses fairly matched that of the near‐fault records. Subsequently, a parametric study was conducted for the buildings subjected to three types of closed‐form pulses with a broad range of periods and amplitudes. The results of the parametric study demonstrate the importance of the ratio of the fundamental period of the structure to the period of the pulse to the excitation of higher modes. The study shows that if the modal response spectrum analysis approach is used — considering the first four modes with a uniform yield reduction factor for all modes, and with the square root of sum of squares modal combination rule — it significantly underestimates bending moment and shear force responses. A response spectrum analysis method that uses different yield reduction factors for the first and the higher modes is presented. Copyright © 2011 John Wiley & Sons, Ltd.     

A numerical model for seismic analysis of masonry buildings: Experimental correlations

A non-linear finite element model for plain masonry structures under lateral static loads and seismic base inputs is presented. Three super-imposed elasto-plastic shear elements are used in order to approximate the typical force-displacement curve for masonry. Material properties are identified with respect to results of shear tests on single piers. Modelling of entire structures is then performed and the numerical results are satisfactorily checked against the experimental outputs of static and shaking table tests of simple 1 and 2 storey buildings. The out of plane behaviour of walls is accounted for by means of a simplified method.     

带深桩基础高层建筑结构的地震动输入问题

带深桩基础高层建筑结构的地震反应分析通常按刚性地基假定选择地震动输入,其合理性一直受到工程界关注。本文探讨了此类结构考虑桩-土-结构相互作用的整体有限元分析的地震激励施加、单元网格划分、积分步长确定、边界处理等问题,通过整体有限元分析模型和常规分析模型的算例分析对比,探讨了常规地震动输入方法的合理程度。结果表明,常规输入法总体偏于安全,是基本可行的,但可能低估结构底部几层的地震反应,应引起注意。     

分散滑移模态控制法在高层建筑结构抗震中的应用

分散控制与集中控制策略相比可以提高结构控制系统的可靠性。文中将分散控制和滑移模态控制算法原理相结合,导出分散滑移模态控制(decentralized sliding mode control,DSMC)算法并应用于高层结构振动控制中。该方法是将结构分解为若干个子结构,分别进行滑移模态控制。文中以某20层钢结构Benchmark模型为例,分别进行3个子结构与4个子结构的分散控制数值计算,与线性二次型最优控制(Linear quadratic optimal control,LQR)效果相比,DSMC算法可以有效地抑制结构位移和加速度反应。     

建筑物震害空间分布模拟GIS方法

提出了一个基于GIS技术的建筑物震害空间分布模拟方法,该方法首先利用GIS的模拟活化技术把地震影响场,建筑震害预测等分析模型形成可供空间分析使用的二次数据,并纳入城市基础数据库之中,构成综合基础数据库。然后利用GIS把多重空间数据进行空间复合,给出城市建筑物震害的空间分布及其统计特征,并识别出城市建筑物的重灾区。最后利用东营市建筑区为例,说明该方法的实用性和有效性。     

高层钢结构抗震pushover分析的侧向力分布模式及其影响

本文针对高层钢结构抗震Pushover分析的适用性和侧向力分布模式的选取等问题,首先,介绍和分析了Pushover分析常用的五种侧向力分布模式及其本质特征;然后,给出了判断侧向力分布模式合理性的准则;最后,通过对比一座15层的平面钢框架结构在Ⅳ类场地的典型地震动下的非线性时程分析和五种侧向力分布下的Pushover分析中的破坏形式和弹塑性反应,研究了高层钢结构抗震Pushover分析的适用性和各侧向力分布模式的合理性;在此基础上,本文给出了高层钢结构Pushover分析时侧向力分布模式的选取建议。     

A generalized continuum method for dynamic analysis of asymmetric tall buildings

The paper presents a continuum method for dynamic analysis of asymmetric tall buildings with uniform cross-section in which the horizontal stiffness is provided by shear walls and columns of arbitrary shape and layout, coupled by horizontal beams. The equations of motions are formulated in variational terms, including axial strain energy. Numerical solutions, obtained by using finite time differences and infinite polynomials, are presented for the response of a twenty-storey building with six shear walls to an impact load and earthquake accelerations. It is shown that omission of the axial deformations results in a substantially distorted pattern of behaviour, some of its effects being:

• 1 Overestimation of the bending stiffness of the coupled shear walls, with corresponding changes in their stiffness ratios.
• 2 Underestimation of the periods of the principal modes, with a corresponding change in the dynamic response.
• 3 Distortion of the magnitude, form, time of onset and coupling of the maximum displacements.
• 4 Pronounced change in the shear force and moment diagrams for the shear walls, the beams and the building as a whole.

     

Direct displacement-based design for seismic retrofit of existing buildings using nonlinear viscous dampers

This paper presents a direct displacement-based design procedure for seismic retrofit of existing buildings using nonlinear viscous dampers according to equivalent linear systems. Unlike conventional methods, the equivalent linear viscous damping provided by the nonlinear viscous dampers is derived based on the assumption that the average energy dissipated between the linear and the nonlinear viscous dampers is equal. Also, the equivalent period and viscous damping for the equivalent linear systems which are used for representing the behavior of bare frames (the buildings without dampers) are derived from the concept of average storage energy and average dissipated energy, respectively. It is shown from nonlinear time-history analyses that the nonlinear action of the retrofitted structures can be reasonably captured by the presented direct displacement-based procedure.     

矩形高层建筑扭转动力风荷载解析模型

本文通过研究不同长宽比、高宽比的矩形棱柱体在边界层风洞中典型攻角下的扭矩，提出了矩形高层建筑扭矩功率谱密度、均方根扭矩系数和Strouhal数的经验公式，并对相干函数作了一定的探讨，建立了完整的扭转动力风荷载解析模型。该模型和试验结果吻合较好，证明它是合理有效的，可在此基础上建立高层建筑扭转动力响应频域计算方法。     

Strain-threshold- and frequency-dependent seismic simulation of nonlinear soils

A one-dimensional equivalent linear method (EQL) is widely used in estimating seismic ground response. For this method, the shear modulus and damping ratio of inelastic soil are supposed to be frequency independent. However, historical earthquake records and laboratory test results indicate that nonlinear soil behavior is frequency-dependent. Several frequency-dependent equivalent linear methods (FDEQL) related to the Fourier amplitude of shear strain time history have been developed to take into account the frequency-dependent soil behavior. Furthermore, the shear strain threshold plays an important role in soil behavior. For shear strains below the elastic shear strain threshold, soil behaves essentially as a linear elastic material. To consider the effect of elastic-shear-strain-threshold- and frequency-dependent soil behavior on wave propagation, the shear-strain-threshold- and frequency-dependent equivalent linear method (TFDEQL) is proposed. A series of analyses is implemented for EQL, FDEQL, and TFDEQL methods. Results show that elastic-shear-strain-threshold- and frequency-dependent soil behavior plays a great influence on the computed site response, especially for the high-frequency band. Also, the effect of elastic-strain-threshold- and frequency-dependent soil behavior on the site response is analyzed from relatively weak to strong input motion, and results show that the effect is more pronounced as input motion goes from weak to strong.