Application of electrical resistivity tomography technique for investigation of landslides: a case from Turkey

Electrical resistivity imaging is a widely used tool in near surface geophysical surveys for investigation of various geological, environmental and engineering problems including landslide. In this study, an electrical resistivity tomography (ERT) survey was conducted in a landslide area, located in the Söke district of Aydın, Turkey. In 2003, the Neogene-aged units on the slope next to a newly built school building became unstable due to an excavation work and moved after a heavy rainfall. The resulting landslide partly covered the school. The authors carried out a 2-D resistivity survey along three profiles over the landslide mass using a Wenner configuration. It yielded useful information about the geometry and characteristics of the landslide. In addition, a 2-D synthetic resistivity modelling study was carried out to understand the response of the resistivity method to a landslide problem before the field surveys. Eight boreholes were also drilled in the landslide area. Both the drilling and resistivity results indicated the presence of a fault in the site. Also, the resistivity data from the line measured along the axis of the landslide revealed the surface of rupture.     

Identification of the origin of salinization in groundwater using multivariate statistical analysis and geochemical modeling: a case study of Kaohsiung,Southwest Taiwan

The study of brine aquifers in southern Taiwan is highly complicated by hybrid geochemical reactions, which obscure important geochemical information. Using multivariate analysis on major and minor ion compositions normalized by Cl⁻ content, chemical constituents were combined into two principal components representing brine mixing and mineral precipitation. Comparing to multivariate analysis on the original data, this procedure reveals more geochemical information. It demonstrates that the brine groundwater of the region is primarily composed of highly evaporated seawater. The evaporation ratio is >70%; a point at which calcite, dolomite and gypsum precipitate. Oxygen and hydrogen isotopic compositions confirm this inference; and further, geochemical modeling quantitatively determined the evaporation ratio to be about 85%. Natural boron contamination is a consequence of brine groundwater. Two evolutionary trends in the plotting of the Cl/B ratio versus Cl⁻ can be identified: (1) Cl/B ratio decreases with boron being released from clay minerals when brine aquifers are flushed with freshwater; and (2) Cl/B ratio increases when seawater of a high Cl/B ratio infiltrates coastal aquifers.     

Slope stability analysis on a regional scale using GIS: a case study from Dhading,Nepal

A spatially distributed physically based slope stability model combined with a hydrological model is presented and applied to a 350-km² area located in Dhading district, Nepal. Land slide safety factor maps are generated for five cases, including three steady state conditions assuming either completely dry soils, half saturated soils, or fully saturated soils, and two quasi-dynamic conditions, i.e. soil wetness resulting from storm events with, respectively a 2 or 25-year return period. For the quasi-dynamic cases, two methods are used, one based on accumulation of groundwater flow from upstream areas, and the other on accumulation of soil water from direct infiltration. The methodology delineates areas most prone to shallow land sliding in function of readily available data as topography, land-use and soil types. For the study area only 29% of the soils are unconditionally stable, while 25% of the soils are found to be unstable under fully saturated conditions. The comparison between the methods based on contributing area or on infiltration for quasi-dynamic conditions show that the approach based on infiltration is more reliable for the study area. The proposed methodology for predicting landslide susceptibility on a regional scale, based on basic data in GIS form, may be useful for other remote regions where detailed information is not available.     

Use of geochemical modeling to evaluate the hydraulic connection of aquifers: a case study from Chianan Plain, Taiwan

Aquifers are generally composed of highly permeable layers that can conduct a considerable amount of groundwater. Traditionally, aquifer units are correlated through the concept of lithostratigraphy. For low-permeable aquifers, it is difficult to define the spatial distribution of hydrogeological units, and this study attempts to use geochemical modeling to identify the groundwater flow paths in an area of Taiwan. Multiple geochemical analyses, including groundwater chemistry; stable isotopic compositions of hydrogen, oxygen and carbon; and radiocarbon contents were performed. Using these parameters as the constraints of geochemical models, the hydraulic connection was examined between pairs of possibly interlinked wells along four selected cross sections, and the conceptual groundwater model was accordingly established. The resultant model suggests that the hydraulic connection between aquifers should be correlated with the concept of chronological stratigraphy, especially for low-permeable, unconsolidated aquifers. Using Darcy’s law, the hydraulic conductivities of the fine-sand aquifers were estimated to be between 3.14 × 10⁻⁵ and 1.80 × 10⁻⁴ m/s, which are roughly one order of magnitude higher than those derived by in situ pumping tests. The substantial extraction of groundwater over a long period in the studied area could accelerate groundwater flow, leading to an overestimation of the aquifer permeability.

---

Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.

---

Résumé En règle générale, les aquifères sont constitués de couches très perméables capables de conduire des quantités d’eau considérables. Les unités aquifères sont traditionnellement corrélées d’un point de vue lithostratigraphique. Dans le cas des aquifères à faible perméabilité, il s’avère difficile de définir une distribution spatiale des unités hydrogéologiques, et cette étude tente d’utiliser la modélisation géochimique pour identifier les cheminements des eaux souterraines dans un secteur de Taiwan. Plusieurs analyses géochimiques ont été réalisées ; elles incluent la chimie des eaux souterraines, les isotopes stables de l’hydrogène, de l’oxygène et du carbone et l’abondance en carbone 14. En utilisant ces paramètres comme contraintes pour les modèles géochimiques, les liaisons hydrauliques entre les puits potentiellement interconnectés ont été étudiées deux par deux, le long de quatre coupes présélectionnées, et le modèle conceptuel a été établi en conséquence. Ce modèle résultant suggère que les connexions hydrauliques inter-aquifères devraient être corrélées avec les concepts stratigraphiques, surtout pour les aquifères non consolidés à faible perméabilité. Les perméabilités dans les aquifères de sables fins ont été estimées par la loi de Darcy entre 3.14 × 10⁻⁵ et 1.80 × 10⁻⁴ m/s, soit environ un ordre de grandeur au-dessus de celles issues des tests de pompage sur site. L’exploitation substantielle des eaux souterraines sur une longue période dans la zone d’étude peut accélérer les écoulements souterrains, menant à une surestimation de la perméabilité de l’aquifère.

---

Resumen Los acuíferos están generalmente compuestos de capas muy permeables que pueden conducir una cantidad considerable de agua subterránea. Tradicionalmente, se ponen en correlación las unidades acuíferas a través del concepto de litoestratigrafía. Para los acuíferos de baja-permeabilidad, es difícil de definir la distribución espacial de unidades hidrogeológicas y este estudio intenta usar modelamiento geoquímico para identificar las direcciones del flujo de agua subterránea en un área de Taiwán. Se realizó el análisis geoquímico múltiple, incluyendo la química del agua subterránea, la composición de isótopos estables de hidrógeno, oxígeno y carbono, y el contenido de radiocarbono. Usando estos parámetros como limitantes de modelos geoquímicos, la conexión hidráulica se examinó entre pares de pozos posiblemente interrelacionados, a lo largo de cuatro cortes transversales seleccionados y de acuerdo con esto se estableció el modelo conceptual del agua subterránea. El modelo resultante sugiere que la conexión hidráulica entre los acuíferos deba interrelacionarse con el concepto de estratigrafía cronológica, sobre todo para los acuíferos sin consolidar de baja permeabilidad. Usando la ley de Darcy, se estimaron las conductividades hidráulicas de los acuíferos de arena fina obteniendo valores entre 3.14 × 10⁻⁵ y 1.80 × 10⁻⁴ m/s, las cuales son aproximadamente un orden de magnitud mayor, que aquéllos obtenidos in situ por las pruebas de bombeo. La extracción considerable de agua subterránea durante un periodo largo en el área estudiada, podría acelerar el flujo de agua subterránea, llevando a una sobrestimación de la permeabilidad en los acuíferos.

     

Separation of a geochemical anomaly from background by fractal and U-statistic methods,a case study: Khooni district,Central Iran

Separation of geochemical anomalies from background are one of the important steps in mineral exploration. The Khooni mineral district (Central Iran) has complex geochemical surface expression due to a complex geological background. This region was chosen as a study area for recognition of the spatial distribution of geochemical elements and separating anomalies from background using stream sediment geochemical data. In the past decades, geochemical anomalies have been identified by means of various methods. Some of these separation methods include: statistical analysis methods, spatial statistical methods and fractal and multi-fractal methods. In this article, two efficient methods, i.e. U-statistics and the fractal concentration-area for separation and detection of anomalous areas of the background were used. The U spatial statistic method is a weighted mean, which considers sampling point positions and their spatial relation in the estimation of anomaly location. Also, fractal and multi-fractal models have also been applied to separate anomalies from background values. In this paper, the concentration–area model (C–A) was suggested to separate the anomaly of background. For this purpose, about 256 stream sediment samples were collected and analyzed. Then anomaly maps of elements were generated based on U spatial statistics and the C-A fractal methods for Au, As and Sb elements. According to obtained results, the U-statistics method performed better than C-A method. Because the comparisons of the known deposits and occurrences against the anomalous area created using thresholds from U-statistics and C-A method show that the spatial U-statistics method hits all of 3 known deposits and occurrences, the C-A fractal method hits 1 and fails 2. In addition, the results showed that these methods with regard to spatial distribution and variability within neighboring samples, in addition to concentration value frequency distributions and correlation coefficients, have more accurate results than the traditional approaches.     

Mineralogical and geochemical characteristics of coal ash from the Northwest Thrace region,Turkey: a case study

The first combined mineralogical and geochemical investigation of coal ashes from the Northwest Thrace Coal Basin, Turkey, was performed as a case study. The coal ash samples were obtained at 525 °C (group I), 750 °C (group II), and 1000 °C (group III) ashing temperatures from coal samples from the basin and were studied in terms of their mineralogical and geochemical composition using XRD and ICP-MS methods. The determination of the mineralogical composition was done for all of the groups; the geochemical analysis was carried out only for group II. In accordance with the high SiO₂, Fe₂O₃, CaO, and SO₃ content of the ash, quartz (SiO₂), hematite (Fe₂O₃), and anhydrite (CaSO₄) are the major crystalline phases for all of the ash groups. The other minerals are muscovite, thenardite, tridymite, calcite, wollastonite, anorthite, cristobalite, gibbsite, ternesite, mullite, nahcolite, and nacrite. High-temperature phases such as mullite, wollastonite, and anorthite were observed at 750 and 1000 °C. According to the (Fe₂O₃ + CaO + MgO+ K₂O+ Na₂O)/(SiO₂ + Al₂O₃+ TiO₂) ratios varying from 0.19 to 5.65, the ashes are highly prone to slagging. Compared to average values of low-rank coal ashes, the contents of V, Cr, Co, Ni, Zn, As, Rb, Sr, Mo, Cs, W, and U of the ash are higher, whereas the total content of rare earth elements (REEs) (Σ 163.7 ppm) are lower. Based on upper continental crust normalization, As, Se, Th, and U are enriched in all of the samples. The higher trace element contents in the ashes might be considered as a possible health hazard. The correlation analyses indicated that Ca is associated with anhydrite and As with hematite. The correlation analyses also showed that newly formed Al and Ca silicates may contain the elements such as Ti, K, Na, Cr, Sn, and Pb.     

Investigation of waste disposal areas using electrical methods: a case study from Chania,Crete, Greece

A geophysical investigation of a landfill area was conducted as inextricable phase of a preliminary geotechnical, geological and hydrogeological study of the area under investigation. Electrical resistivity tomography (ERT), one of the most promising prospecting techniques mainly concerning its effective contribution to resolve several environmental problems, was applied for the geophysical modeling. ERT is a robust imaging method the theory and implementation of which are well documented in geophysical research literature. The survey site is located in Akrotirion Peninsula, about 7 km east of Chania city in Crete I. The geological setting comprises Trypalion limestones, marly limestones and a clayed weathered layer. Cavities are also identified at various scales which are recent tectono-karstic voids. Due to the above-mentioned geological singularity and in the light of the requirement for an environmentally safe construction of the landfill, an ERT survey was carried out. Specifically, seven geoelectrical tomographies were conducted reaching the prospecting depth of 36 m. The resulted images conduced, to overcome geotechnical problems since the spatial distribution of karstic voids was determined, to plan the future sites for waste disposal as the geological conditions were studied in detail and to reliably estimate the thickness of the already deposited wastes. The resulted images were confirmed using available borehole logs and ambient noise measurements.     

Application of singularity mapping technique to identify local anomalies using stream sediment geochemical data,a case study from Gangdese,Tibet, western China

Identifying geochemical anomalies from background is a fundamental task in exploration geochemistry. The Gangdese mineral district in western China has complex geochemical surface expression due to complex geological background and was chosen as a study area for recognition of the spatial distribution of geochemical elements and separating anomalies from background using stream sediment geochemical data. The results illustrate that weak anomalies are hidden within the strong variance of background and are not well identified by means of inverse distance weighted; neither are they clearly identified by the C–A method if this method is applied to the whole study area. On the other hand, singularity values provide new information that complements use of original concentration values and can quantify the properties of enrichment and depletion caused by mineralization. In general, producing maps of singularities can help to identify relatively weak metal concentration anomalies in complex geological regions. Application of singularity mapping technique in Gangdese district shows local anomalies of Cu are not only directly associated with known deposits in the central part of the study area, but also with E–W and N–E oriented faults in the north of the study area. Both types of anomalies should be further investigated for undiscovered Cu mineral deposits.     

Imaging of wastewater percolation in heterogeneous soil using electrical resistivity tomography (ERT): a case study at east of Tenth of Ramadan City,Egypt

The objective of this study is to evaluate the effectiveness of DC resistivity surveys for imaging the wastewater percolation around the stabilization ponds in the Tenth of Ramadan City, the desert fringes of East Nile Delta, Egypt. Detailed resistivity surveys, including DC soundings and electrical resistivity tomography (ERT), were carried out along several profiles. Furthermore, synthetic modeling of ERT was designed to optimize the survey configurations and interpretation of the results. A 2D modeling of smoothness-constrained least-squares inversion scheme was applied to delineate the possible wastewater infiltration zones from oxidation ponds. Because the geoelectrical interpretation has a degree of non-uniqueness, the resistivity inversion was constrained using borehole lithological information and soil sample laboratory measurements. The DC inversion results indicate decreasing resistivity down to a depth of 15 m around waste disposal sites. The inferred soil zone close to the oxidation ponds was a mixture of sand, silt and clay. Moreover, the clay minerals were characterized by moderate swelling that could have reduced the vertical infiltration speed, causing wastewater seepage, especially around unlined disposal sites and open surface drains. Accordingly, the medium-to-low resistivity values can be attributed to wastewater leakage in clayey sand soil. Because the area slopes generally toward the northeast, the surface seepage was dominant in the shallow impermeable sandy clay subsoil. Therefore, measuring soil parameters is a complementary method to optimize resistivity interpretation, with potential for mitigating environmental hazards from wastewater leakage around disposal ponds.     

Hydrogeologic-structure and groundwater-movement imaging in tideland using electrical sounding resistivity: a case study on the Ariake Sea coast, southwest Japan

Groundwater flow exerts a crucial control on the boundary between the sea and freshwater and is thus a key factor for preserving groundwater resources and preventing seawater intrusion in coastal areas. Although it is highly probable that geological faults in coastal areas affect groundwater flow patterns, the effect has not been described yet in detail. This study is aimed at detecting and imaging groundwater flow and its temporal change around a fault in a coastal area through resistivity and chargeability distributions using electrical sounding. The Okoshiki area in central Kyushu, southwest Japan, was selected as a case study area, because of the presence of Kamiouda Fault. The measurements were conducted along six lines of both parallel and perpendicular orientations to the coastline. A feature suggesting a fault zone was evident on two lines. Through the temporal change of resistivity, movement and mixing processes of the seawater and freshwater during the ebb, low and flood tides were interpreted. A conceptual model of the processes was constructed in which a fault zone and the configuration of bedrock are dominant elements by acting as a selective path and a barrier to the groundwater flow, respectively.     

Investigation of groundwater contamination using electric and electromagnetic methods at an open waste-disposal site: a case study from Isparta, Turkey

 Geophysical methods, when integrated with soil chemical and hydrogeological methods, can be used to investigate groundwater contamination. Direct current (DC) resistivity geo-electrical sounding and very-low-frequency electromagnetic (VLF-EM) data were collected at an open waste site used by the municipality of the city of Isparta, Turkey. The groundwater at shallow depths in alluvium, which is composed of gravel, sand and clay, were expected to be hazardously contaminated under and around the open waste-disposal site, in which both household and industrial wastes are known to be disposed of improperly. In this study, we mapped the spread of groundwater contamination using a VLF-EM method, which allows fast and inexpensive data collection. The method complements the results of geo-electrical sounding. There is a good correlation between the results of the VLF-EM and the DC-resistivity methods employed for the investigation of subsurface structure of the site, where soil chemical and previous hydrogeological surveys have indicated high levels of chemical concentrations. Received: 17 January 2000 · Accepted: 12 August 2000     

塔里木西北缘三叠纪伸展作用:来自柯坪辉绿岩地球化学、锆石U‐Pb年代学的证据

为了探讨塔里木北缘构造岩浆演化,采用锆石年代学、岩石地球化学方法对柯坪辉绿岩进行研究。LA‐ICP‐MS锆石U‐Pb结果表明其为中‐晚三叠世岩浆活动的产物。辉绿岩SiO2含量为45.68%~46.97%、TiO2为3.98%~4.03%、Al2O3为14.81%~14.90%、K2O/Na2O为0.39~0.42,属于高钾碱性系列。微量元素特征表明,有微弱的Ce负异常(δCe=0.95~0.99),Eu异常不明显(δEu=0.98~1.00),总体富集大离子亲石元素和LREE,高场强元素相对亏损。柯坪辉绿岩、阿图什辉绿岩与柯坪玄武岩、巴楚辉绿岩等具有相似的源区和一致的构造背景,均为拉张背景下形成,但却分属不同的构造事件。研究表明早石炭世南天山洋闭合,晚石炭世—早二叠世柯坪地区为塔里木北缘的具有前陆盆地性质的残留海盆,受地幔柱影响柯坪—巴楚地区出现大规模岩浆活动。二叠纪之后塔里木北缘为后碰撞伸展背景。三叠纪南天山—塔里木北缘为拉伸走滑的构造背景,本文的辉绿岩,正是在这种背景下形成的。     

Origin and terminal architecture of a submarine slide: a case study from the Permian Vischkuil Formation,Karoo Basin,South Africa

Submarine mass movement deposits exposed in the Vischkuil Formation, Laingsburg Karoo Basin, South Africa, provide a rare opportunity to analyse and interpret their emplacement history and deformation processes at a scale comparable to seismic examples. An up to 80 m thick slide deposit, continuously exposed in two 2 km long sub‐parallel sections, passes from extensionally deformed material (clastic dykes and down‐dip facing low‐angle shear surfaces) down‐dip into a compressional toe zone with large (tens of metres amplitude) folds dissected by steep, up‐dip facing thrust planes. The compressional shear planes sole out onto a highly sheared décollement and cross‐cutting relationships indicate an up‐depositional dip younging in the timing of fold dissection. Lithofacies characteristics and detailed correlation of volcanic ash and other marker beds over more than 500 km² in the bounding undeformed stratigraphy indicate a low‐gradient (<0·1°) basin floor setting. The slide is abruptly overlain by an up to 50 m thick debrite with sandy clasts supported by an argillaceous matrix. Shear loading of the debris flow is interpreted to have driven large‐scale deformation of the substrate through the generation of high shear stresses at a rheological interface due to: (i) the abrupt contact between the slide and the debrite; (ii) the coincident thickness distributions of the debrite and slide; (iii) the distribution of the most intense folding and thrusting under the thickest parts of the debrite; (iv) the preservation of fold crests with only minor erosion along fold limbs; (v) the presence of the debrite under overturned folds; (vi) the presence of laterally extensive marker beds directly above deformation units indicating minimal depositional topography; and (vii) the demonstrably local derivation of the slide as individual folded beds are mapped into undeformed strata outside the areas of deformation. The debrite is directly overlain by fine‐grained turbidite sandstone beds that show widespread vertical foundering into the debrite. This case study demonstrates that intensely deformed strata can be generated by negligible amounts of down‐dip movement in a low‐gradient, fine‐grained basin floor setting with the driver for movement and deformation being the mass imbalance resulting from emplacement of episodic debris flows. Simple interpretation of an unstable slope setting based on the presence of such deformed strata should be treated with caution.     

丘陵山区多目标区域地球化学调查不同成因表层土壤代表性研究——以浙江绍兴地区为例

当前, 多目标区域地球化学调查工作已逐步进入丘陵山区, 与平原区不同, 丘陵山区地质背景更复杂, 土壤成因类型和土地利用方式多变, 土壤类型多样。如何布设土壤样点以客观真实地反映区域土壤地球化学分布特征是值得关注的问题。选择浙江绍兴市区以南40 km2的丘陵山区, 按照多目标区域地球化学调查规范样品布设原则及采样要求, 以4点/km2密度采集表层土壤样品, 测定了38项元素指标含量。通过对比不同采样密度及不同成因土壤元素含量及其空间分布特征, 开展丘陵山区表层土壤采样代表性研究。结果表明, 多目标区域地球化学调查规范中的小格采样、大格组合分析方案能够很好地反映土壤元素区域地球化学分布模式; 对于大多数元素指标而言, 在丘陵山区以1点/km2密度采集能够代表采样单元格物质组成的冲积成因土壤, 可更好地满足样品代表性要求。在评价As、Mn、Mo、Al2O3、MgO、K2O等元素指标异常时, 可倾向性地采集残坡积成因土壤。研究成果为丘陵山区多目标区域地球化学调查土壤样品采集方法的完善提供了理论依据。     

Neural networks and landslide susceptibility: a case study of the urban area of Potenza

For those working in the field of landslide prevention, the estimation of hazard levels and the consequent production of thematic maps are principal objectives. They are achieved through careful analytical studies of the characteristics of landslide prone areas, thus, providing useful information regarding possible future phenomena. Such maps represent a fundamental step in the drawing up of adequate measures of landslide hazard mitigation. However, for a complete estimation of landslide hazard, meant as the degree of probability that a landslide occurs in a given area, within a given space of time, detailed and uniformly distributed data regarding their incidence and causes are required. This information, while obtainable through laborious historical research, is usually partial, incomplete and uneven, and hence, unsatisfactory for zoning on a regional scale. In order to carry this out effectively, the utilization of spatial estimation of the relative levels of landslide hazard in the various areas was considered opportune. These areas were classified according to their levels of proneness to landslide activity without taking recurrence periods into account. Various techniques were developed in order to obtain upheaval numerical estimates. The method used in this study, which was applied in the area of Potenza, is based on techniques derived from artificial intelligence (Artificial Neural Network—ANN). This method requires the definition of appropriate thematic layers, which parameterize the area under study. These are recognized by means of specific analyses in a functional relationship to the event itself. The parameters adopted are: slope gradient, slope aspect, topographical index, topographical shape, elevation, land use and lithology.     

Landslide Hazard Zonation using Remote Sensing and GIS: a case study of Dikrong river basin, Arunachal Pradesh, India

Landslides are among the most costly and damaging natural hazards in mountainous regions, triggered mainly under the influence of earthquakes and/or rainfall. In the present study, Landslide Hazard Zonation (LHZ) of Dikrong river basin of Arunachal Pradesh was carried out using Remote Sensing and Geographic Information System (GIS). Various thematic layers namely slope, photo-lineament buffer, thrust buffer, relative relief map, geology and land use / land cover map were generated using remote sensing data and GIS. The weighting-rating system based on the relative importance of various causative factors as derived from remotely sensed data and other thematic maps were used for the LHZ. The different classes of thematic layers were assigned the corresponding rating value as attribute information in the GIS and an “attribute map” was generated for each data layer. Each class within a thematic layer was assigned an ordinal rating from 0 to 9. Summation of these attribute maps were then multiplied by the corresponding weights to yield the Landslide Hazard Index (LHI) for each cell. Using trial and error method the weight-rating values have been re-adjusted. The LHI threshold values used were: 142, 165, 189 and 216. A LHZ map was prepared showing the five zones, namely “very low hazard”, “low hazard”, “moderate hazard”, “high hazard” and “very high hazard” by using the “slicing” operation.     

The importance of hydrogeological and hydrological investigations in the residential area: a case study in Burdur,Turkey

Water resources in residential areas are negatively affected by floods. In addition, many aquifers are contaminated as a result of urbanization. Great damage caused during earthquakes are partly attributed to the residential pattern which ignores the potential effect of groundwater. Hydrogeological and hydrological surveys must be carried out in the residential areas to determine the interaction between water and residential development of all types.Recent hydrogeological and hydrological investigations regarding the impact of urbanization were made for the city of Burdur (Turkey). To evaluate the effect of earthquakes on groundwater, groundwater isohypse and groundwater isopach maps were prepared showing most of the buildings within the Burdur city boundaries, which are in the areas where groundwater depth is less than 10 m. This is considered a critical depth for liquefaction during an earthquake. Lowering of the groundwater table has to be considered as one of the alternatives in reducing earthquake hazards. The chemical makeup of groundwater was also determined to consider its relationship to contamination and possible effects upon the foundations. Streams flowing across the Burdur residential area formed a flooding risk. Results of the peak flow analysis can be used to design improvements for the city. Maps of the best residential development areas have been prepared by using hydrological and hydrogeological results.     

Mineralogical,geochemical and microfabric evidences of gypsum crusts: a case study from Budapest

High levels of SO₂ and particulate pollution enable the rapid development of gypsum-rich weathering crusts in Budapest. Two types of white crusts, thin and thick ones, and two forms of black crusts, laminar and framboidal ones, were studied in limestone buildings of the parliament and Citadella. The percentage of crust cover and damage categories were documented on selected walls. Petrographic, XRD, XRF and sulphur isotope analyses were performed under laboratory conditions to understand the mechanism of crust formation. White crusts found both on exposed and sheltered walls display a calcite-rich layer with gypsum, while black crusts are enriched with gypsum. The sulphur isotopic composition of white and black crusts overlaps, but the crusts are slightly enriched in heavy isotopes compared to rainwater. S content, Si/Al ratios and particulates in black crusts suggest that air pollution (SO₂, dust) contributes to black crust formation. The accumulation of sulphur and Zn enrichment of white crusts were also documented indicating that under high pollution levels, even these compound can accumulate on exposed facades.