混凝土动态压缩试验及其本构模型

按照地震荷载作用的速率范围，利用最新研制和改造的大型混凝土静，动试验系统，进行了4种数量级加载速率下混凝土轴向压缩试验，测得了混凝土动态强度，弹性模量，泊松比及应力-应变关系，根据加载条件和混凝土静，动态试验结果间的关系，建立了混凝土的动态本构模型，为地震区的混凝土结构，海上混凝土采油平台和核防御壳等结构受动荷载作用的分析提供参考。     

Behavior of Deformation and Strength of Concrete Under Biaxial Stresses

The study of the behavior of concrete under biaxial stresses is essential to the design of offshore concrete platforms. Using the multiaxial test apparatus developed by the authors, the deformation and strength of concrete under biaxial stresses are studied experimentally. Based on the test data, an endochronic damage constitutive model and a failure criterion are proposed. According to the above model, an incremental nonlinear iterative programme is developed, and a plate sample in plane stress state is analyzed.     

Strength of Lightweight Concrete Under Triaxial Compression

The strength of lightweight concrete under triaxial compressive stress is studied experimentally with the concrete triaxial apparatus designed by the authors, and is compared with that of normal concrete under the same stress state. Ninety-five 100 mm cubes under twenty stress ratios are tested. As compared with normal concrete, it is found that not only the multiaxial compressive strength of lightweight concrete is small, but also the ratio of the multiaxial compressive strength to the uniaxial compressive strength is small. The influence of the intermediate principal stress on the multiaxial strength of lightweight concrete is discussed. The strength criteria which are expressed in the principal stresses and the octahedral stresses respectively are proposed.     

Estimation of Undrained Bearing Capacity for Offshore Soft Foundations with Cyclic Load

The degradation strength of soils under cyclic loading is studied and a method for deter-mining the cyclic degradation strength with cyclic triaxial tests is given in the paper.Furthermore,a dum-my static method for estimating the undrained bearing capacity for offshore soft foundation under waveloads is developed.It can consider the effect of the difference of cyclic stress for different parts of the foun-dation on both the degradation strength of the foundation soil and the bearing capacity so that the esti-mated result can better reflect the real condition of foundation under cyclic loading.The method can be ap-plied to plane and space problem.     

普强高性能混凝土受压应力-应变全曲线试验研究

通过普强高性能混凝土和普通混凝土的应力-应变全曲线试验研究,得到一系列应力-应变曲线。对普强高性能混凝土和普通混凝土的立方体抗压强度与棱柱体抗压强度的关系、棱柱体抗压强度与峰值应力所对应应变的关系及棱柱体抗压强度与初始弹性模量的关系进行了分析。结果表明,虽然普强高性能混凝土的力学性能与普通混凝土的力学性能存在一定的差别,但主要力学性能还是相似的。说明在不改变混凝土的力学性能的基础上通过对普通强度混凝土原材料的优选和配合比的优化能够提高混凝土的耐久性能。     

大直径预应力钢筒混凝土海底输油管道受力性能分析

预应力钢筒混凝土管(PCCP)是一种优质复合管材,已经应用于海底输油等领域。由于PCCP中含有混凝土、钢筒、预应力钢丝,结点构造和地下埋置工况复杂,对于PCCP的受力机理认识尚不统一。根据环形预应力作用机理,结合多层圆筒轴对称平面形变理论,研究建立了单层预应力作用下埋置式PCCP受力模型,并根据PCCP使用阶段抗裂要求,分析提出使用阶段PCCP预应力计算公式。采用数值分析法,以内压力等为变量,研究使用阶段不同内压力作用下PCCP的应力变化。分析结果与提出模型进行对比,建议预应力计算公式乘以增大系数1.2。预应力计算结果与国内外规范比较说明公式是合理的。     

Wetting-induced axial and volumetric strains of a sandstone mudstone particle mixture

In this study, the deformation induced by the first wetting typically referred to as wetting deformation of a sandstone–mudstone particle mixture is examined. Wetting deformation can lead to collapse-inducing cracks. The cracks may weaken the strength of the structure. To investigate the first wetting-induced deformation of the sandstone and mudstone particle mixture, three triaxial tests were conducted. Two of the triaxial tests used saturated soil and dry soil. These tests were used to calculate the strain under the condition of minimized deviator stress ratio at wetting. The third triaxial test accesses various deviator stress ratios at wetting. Additionally, the influence on axial and volumetric strain of wetting at varying levels of the confining stress and deviator stress ratios at wetting was evaluated. The wetting axial and volumetric strains were found to increase with an increased confining stress and deviator stress ratio at wetting. The relationships between the wetting axial strain and deviator stress ratio at wetting yielded a logarithmic curve for various levels of confining stress. In contrast, the wetting volumetric strain yielded a direct relationship with the deviator stress ratio at wetting for various levels of confining stress. Based on these results, two equations for predicting the wetting axial and volumetric strains are suggested.     

Experimental study on the cyclic behavior of loose calcareous sand under linear stress paths

Abstract

Hollow cylinder torsional shear tests on loose isotropically and anisotropically consolidated calcareous sand were conducted to investigate the cyclic behavior under three different linear stress paths, including horizontal line, oblique line, and vertical line stress paths, in a coordinate system of the normal stress difference and the horizontal shear stress. The dominant strain components of the isotropically consolidated specimens are affected by the stress paths. With increasing consolidation stress ratio, axial strain gradually becomes the dominant strain component under the three different stress paths. The cyclic strength of the isotropically consolidated specimens under the three different stress paths are almost the same, while for the anisotropically consolidated specimens, the cyclic strengths are strongly affected by the stress paths. These results indicate that conventional cyclic triaxial tests may overestimate cyclic strength in some cases. Irrespective of the stress paths and cyclic stress ratios, the terminal residual excess pore pressure ratio decreases with increasing consolidation stress ratio. Moreover, an empirical equation is proposed to describe the relationship between the normalized shear work and the normalized residual excess pore pressure ratio. The comparative study reveals that the relationship proposed for silica sand is not suitable for the dynamic analyses of calcareous sand.     

Wave-induced response of seabed: Various formulations and their applicability

In this study, a set of generalized analytical solutions are developed for the wave-induced response of a saturated porous seabed under plane strain condition. When considering the water waves originating in deep water and travelling towards the shore, their velocities, lengths and heights vary. Depending on the characteristics of the wave and the properties of the seabed, different formulations (fully dynamic, partly dynamic, quasi-static) for the wave-induced response of the seabed are possible. The solutions for the response with these formulations are established in terms of non-dimensional parameters. The results are presented in terms of pore pressure, shear stress and vertical effective stress distributions within the seabed. For typical values of wave period and seabed permeability, the regions of applicability of the three formulations are identified and plotted in parametric spaces. With given wave and seabed characteristics, these regions provide quick identification of the appropriate formulation for an adequate evaluation of the wave-induced seabed response.     

Full-range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method

Ｆｕｌｌ－ｒａｎｇｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｆａｔｉｇｕｅｂｅｈａｖｉｏｒｓｏｆｒｅｉｎｆｏｒｃｅｄｃｏｎｃｒｅｔｅｓｔｒｕｃｔｕｒｅｓｂｙｆｉｎｉｔｅｅｌｅｍｅｎｔｍｅｔｈｏｄ￥ＳｏｎｇＹｕｐｕ；ＺｈａｏＳｈｕｎｂｏ；ＷａｎｇＲｕｉｍ...     

Fatigue Behavior of Plain Concrete Under Biaxial Compression: Experiments and Theoretical Model

The effects of different lateral confinement stress on the fatigue behavior of and cumulative damage to plain concrete are investigated experimentally. Eighty 100 mm x 100 mm x 100 mm specimens of ordinary strength concrete are tested under constant- or variable-amplitude fatigue loading and lateral confinement pressure in two orthogonal directions. A fatigue equation is developed by modifying the classical Aas-Jakobsen S-N equation for taking into account the effect of the confined stress on fatigue strength of plain concrete. The results of variable-amplitude fatigue tests indicate that the linear damage theory proposed by Palmgren and Miner is unreasonable in the biaxial stress state. A nonlinear cumulative damage model that could model the effects of the magnitude and sequence of variable-amplitude fatigue loading and lateral confinement pressure is proposed on the basis of the evolution laws of the residual strains in the longitudinal direction during fatigue tests. The residual fatigue life predic     

动荷载作用下海底粉土的孔压响应及其动强度

本文选用近海分布较广的粉土为研究对象 ,利用室内动三轴试验结果 ,找出动荷载作用下粉土的动应力应变关系 ,分析模拟波浪荷载作用下粉土中的孔压响应、临界循环次数 ,确定波浪作用下粉土的应力状态、破坏临界循环次数 ,判断不同深度处的粉土发生液化的可能性及发生液化所需要的时间 ;研究粉土在动荷载作用下的强度降低 ,为海上工程设计和施工提供科学依据。     

海洋平台的灌浆卡箍技术研究

在国内外文献研究的基础上，对钢质近海结构物的修理，加固方法做了较为深入的研究，利用丹麦学者N．S．Ottosen提出的多轴应力状态下混凝土强度理论Ottosen破坏准则，建立了钢与混凝土组合结构T型灌浆卡箍管节点的轴向受控，受压和面内弯矩作用下的非线性有限元计算模型，采用分级加载计算分析了相应的极限承载能力，并与试验结果进行比较分析，计算结果表明，经灌浆卡箍维修后的管节点应力分布，变形和极限承载能力都得到了明显的改善，所得结果较好地反映了实际结构的力学特性。     

Mechanical Behavior of Light-Weight Soil Under Consolidated Drained Shear Condition

To reveal the influence of material composition on mechanical properties of light-weight soil, stress-strain -volumetric strain characteristics and Poisson's ratio of mixed soil were researched by consolidated drained shear tests. The results show that light-weight soil is a kind of structural soil, so its mechanical properties are affected by mixed ratio and confining pressure, and mixed soil possesses structural yield stress. When confining pressure is less than the structural yield stress, strain softening occurs; when confining pressure is more than the structural yield stress, strain hardening is observed. There are two kinds of volume change behavior: shear contraction and shear dilatancy. Shear dilatancy usually leads to strain softening, but there isn't an assured causal relationship between them. Poisson's ratio of mixed soil is a variational state parameter with the change of stress state, it decreases with increased confining pressure, and it increases with increased stress level. When axial strain is near 5%, Poisson’ ratio is gradually close to a steady value. The main range of Poisson's ratio is 0.25～0.50 when confining pressure changes from 50 to 300 kPa. When unconfined compressive strength of mixed soil is less than 328 kPa, its stress-strain-volumetric strain characteristics can be predicted very well by Duncan-Chang model (E-B model). However, when the range of unconfined compressive strength is [328 kPa, 566 kPa], the model can't predict stress-strain characteristics accurately when confining pressure is under 200 kPa, and it also can't predict the strong shear dilatancy phenomenon of mixed soil under low confining pressure.     

Shear Strength of Jumunjin Sand according to Relative Density

The properties of sands pertaining to shear strength have been studied extensively by plane strain and triaxial tests for relative densities above 40%. Unfortunately, properties of sand have not been comprehensively studied for relative density below 40%. An experimental investigation of the shear strength of Jumunjin sand was carried out using a plane strain, triaxial and direct shear apparatus according to relative density ranges from 0 to 100%. Because of the complexity of the shear tests on coarse materials, correlations were developed that would be useful for practical purposes. This article presents a comparison of strength properties' results and their correlation with relative density.     

Effect of silica fume on compressive strength of oil-polluted concrete in different marine environments

In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.     

Effect of Silica Fume on Compressive Strength of Oil-Polluted Concrete in Different Marine Environments

In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.     

多晶冰细观模拟方法及压力条件下的力学特性

针对多晶冰 ,从物体细观的角度形成三维细观数值模拟方法 ,通过计算与实验结果比较 ,证明了其可行性。在此基础上 ,对具有脆性特性即在高应变速率作用下的多晶冰进行了数值实验 ,求出了在单向受压条件下不同冰晶尺寸的微裂纹密度与应力、应变之间的关系。为正确把握多晶冰的力学特性提供了一种新的研究方法     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

波浪作用下开孔沉箱疲劳与承载能力研究

开孔沉箱孔洞周围存在以三轴循环应力为特征的复杂承载区,其中混凝土损伤速度远大于单轴应力条件,局部疲劳损伤快速累积使结构整体承载能力迅速下降。考虑迎浪面入射波浪与消浪室内反射波浪的循环作用,针对开孔区域复杂应力状态下的疲劳损伤问题,基于不可逆损伤力学发展的数值计算方法模拟开孔板疲劳过程,得到循环荷载作用下不同类型开孔板的损伤演化历程,并计算损伤后整体结构极限承载力大小,通过综合对比孔洞损伤发展规律和结构极限承载能力,建立了疲劳作用下开孔沉箱极限承载能力判断依据。现有规范依据设计使用年限、波浪条件、作用效应组合等确定材料与结构强度,但并未充分体现开孔结构的优势与承载特点,在此基础上文中补充了开孔结构的优化设计以及实际寿命判断。