Delineation of groundwater potential zones in Kakund watershed,Eastern Rajasthan,using remote sensing and GIS techniques

The remotely sensed data provides synoptic viewing and repetitive coverage for thematic mapping of natural resources. In the present study hydrogeomorphological mapping has been carried out in Kakund watershed, Eastern Rajasthan for delineating groundwater potential zones. IRS-1D LISS III Geocoded FCC data in conjunction with Survey of India toposheet (1:50000 scale) and field inputs were used for thematic mapping. Geomorphic units identified through visual interpretation of FCC include: alluvial plain, plateau, valley fills, intermontane valleys, burried pediment, residual hills, and linear ridges. In addition, lineaments were mapped since they act as conduit for groundwater recharge. Majority of the lineaments trends NE-SW and a few along NW-SE directions and are confined to the southern and southeastern parts of the watershed. Based on hydrogeomorphological, geological and lineament mapping the Kakund watershed has qualitatively been categorized into four groundwater potential zones, viz. good to very good, moderate to good, poor to moderate and very poor to poor. The study reveals that only 10.97% of the area has good to very good, 35.41% area with moderate to good, 49.04 % of the area has poor to moderatel, while remaining 4.57% has poor to very poor groundwater potential.     

Drought risk assessment using remote sensing and GIS techniques

Beginning with a discussion of drought definitions, this review paper attempts to provide a review of fundamental concepts of drought, classification of droughts, drought indices, and the role of remote sensing and geographic information systems for drought evaluation. Owing to the rise in water demand and looming climate change, recent years have witnessed much focus on global drought scenarios. As a natural hazard, drought is best characterized by multiple climatological and hydrological parameters. An understanding of the relationships between these two sets of parameters is necessary to develop measures for mitigating the impacts of droughts. Droughts are recognized as an environmental disaster and have attracted the attention of environmentalists, ecologists, hydrologists, meteorologists, geologists, and agricultural scientists. Temperatures; high winds; low relative humidity; and timing and characteristics of rains, including distribution of rainy days during crop growing seasons, intensity, and duration of rain, and onset and termination, play a significant role in the occurrence of droughts. In contrast to aridity, which is a permanent feature of climate and is restricted to low rainfall areas, a drought is a temporary aberration. Often, there is confusion between a heat wave and a drought, and the distinction is emphasized between heat wave and drought, noting that a typical time scale associated with a heat wave is on the order of a week, while a drought may persist for months or even years. The combination of a heat wave and a drought has dire socio-economic consequences. Drought risk is a product of a region’s exposure to the natural hazard and its vulnerability to extended periods of water shortage. If nations and regions are to make progress in reducing the serious consequences of drought, they must improve their understanding of the hazard and the factors that influence vulnerability. It is critical for drought-prone regions to better understand their drought climatology (i.e., the probability of drought at different levels of intensity and duration) and establish comprehensive and integrated drought information system that incorporates climate, soil, and water supply factors such as precipitation, temperature, soil moisture, snow pack, reservoir and lake levels, ground water levels, and stream flow. All drought-prone nations should develop national drought policies and preparedness plans that place emphasis on risk management rather than following the traditional approach of crisis management, where the emphasis is on reactive, emergency response measures. Crisis management decreases self-reliance and increases dependence on government and donors.     

Use of remote sensing, GIS and groundwater monitoring to estimate artificial groundwater recharge in Riyadh, Saudi Arabia

This study aims to estimate artificial recharge of groundwater by using remote sensing technology, geographical information systems, and groundwater surveys. This study is part of the King Fahd project for rainfall and runoff water harvesting, within the premises of Alilb Dam in Diriyah to the west of Riyadh. Digital elevation models were obtained with the help of aerial photography from the year 2007. These models were used to delineate watershed. Average rainfall was calculated using isoheytal method, and the area of each of the storage lakes was measured using SPOT 5 satellite images from 2007. Fluctuations in groundwater levels, evaporation, and infiltration rates were used to determine the water balance for the purpose of estimating of artificial recharge. Artificial recharge rates were found to surpass natural recharge from rainfall. Recharge wells caused a reduction in the effect of evaporation on storage lakes and helped in supplying water to the groundwater reservoir. Moreover, 80% and 86% of the rainwater was found to be available for artificial recharge in Alilb at 2005 and 2007, respectively. The study recommends the establishment of strategic projects for water storage using artificial recharge wells, an increase in the number of monitoring wells around the dams, and the monitoring of hydrochemical changes in groundwater both before and after the artificial recharge. It also recommends the erection of a weather station in the northwest of Wadi Hanifa.     

Application of remote sensing and GIS for delineating groundwater recharge potential zones of Kovilpatti Municipality,Tamil Nadu using IF technique

During the last three decades, remotely sensed data (both satellite images and aerial photographs) have been increasingly used in groundwater exploration and management exercises. An integrated approach has been adopted in the present study to delineate groundwater recharge potential zones using RS and GIS techniques. IRS-1C satellite imageries and Survey of India toposheets are used to prepare various thematic layers viz. geology, soil, land-use, slope, lineament and drainage. These layers were then transformed in to raster data using feature to raster converter tool in ArcGIS 9.3 software. The raster maps of these factors are allocated a fixed score and weight computed from Influencing Factor (IF) technique. The weights of factors contributing to the groundwater recharge are derived using aerial photos, geology maps, a land use database, and field verification. Subjective weights are assigned to the respective thematic layers and overlaid in GIS platform for the identification of potential groundwater recharge zones within the study area. Then these potential zones were categories as ‘high’, ‘moderate’, ‘low’, ‘poor’. The resulted map shows that 19 % of the area has highest recharge potential, mainly confined to buried pediplain, agriculture land-use and river terraces (considerable amount of precipitated water percolates into subsurface), 28 % of the area has moderate groundwater recharge potentiality and rest of the area has low to poor recharge potentiality. The residual hills and linear ridges with steep slopes are not suitable for artificial recharge sites. Finally, 13 % of total average annual precipitated water (840 mm) percolates downward and ultimately contributes to recharge the aquifers in the Kovilpatti Municipality area. The paper is an attempt to suggest for maintaining the proper balance between the groundwater quantity and its exploitation.     

Assessment of groundwater potential zone using remote sensing,GIS and multi criteria decision analysis techniques

The sustainable development and management of groundwater resource needs quantitative assessment, based on scientific principle and recent techniques. In the present study, groundwater potential zone is being determined using remote sensing, Geographical Information System (GIS) and Multi-Criteria Decision Analysis (MCDA) techniques using various thematic layers viz. geomorphology, geology, drainage density, slope, rainfall, soil texture, groundwater depth, soil depth, lineament and land use/ land cover. The Analytic Hierarchy Approach (AHP) is used to determine the weights of various themes for identifying the groundwater potential zone based on weights assignment and normalization with respect to the relative contribution of the different themes to groundwater occurrence. Finally, obtained groundwater potential zones were classified into five categories, viz. low, medium, medium-high, high and very high potential zone. The result depicts the groundwater potential zone in the study area and found to be helpful in better development and management planning of groundwater resource.     

Delineation of groundwater recharge zones and identification of artificial recharge sites in West Medinipur district,West Bengal,using RS,GIS and MCDM techniques

Artificial recharge plays a pivotal role in the sustainable management of groundwater resources. This study proposes a methodology to delineate artificial recharge zones as well as to identify favorable artificial recharge sites using integrated remote sensing (RS), geographical information system (GIS) and multi-criteria decision making (MCDM) techniques for augmenting groundwater resources in the West Medinipur district of West Bengal, India, which has been facing water shortage problems for the past few years. The thematic layers considered in this study are: geomorphology, geology, drainage density, slope and aquifer transmissivity, which were prepared using IRS-1D imagery and conventional data. Different themes and their corresponding features were assigned proper weights based on their relative contribution to groundwater recharge in the area, and normalized weights were computed using the Saaty’s analytic hierarchy process (AHP). These thematic layers were then integrated in the GIS environment to delineate artificial recharge zones in the study area. The artificial recharge map thus obtained divided the study area into three zones, viz., ‘suitable,’ ‘moderately suitable’ and ‘unsuitable’ according to their suitability for artificial groundwater recharge. It was found that about 46% of the study area falls under ‘suitable’ zone, whereas 43% falls under the ‘moderately suitable’ zone. The western portion of the study area was found to be unsuitable for artificial recharge. The artificial recharge zone map of the study area was found to be in agreement with the map of mean groundwater depths over the area. Furthermore, forty possible sites for artificial recharge were also identified using RS and GIS techniques. Based on the available field information, check dams are suggested as promising artificial recharge structures. The results of this study could be used to formulate an efficient groundwater management plan for the study area so as to ensure sustainable utilization of scarce groundwater resources.     

Prioritization of sub-watersheds for conservation measures in a semi arid watershed using remote sensing and GIS

Land and water resources development plans are generally adopted at watershed level. Delineation of watersheds and their prioritization within large river basins requires host of terrain parameters to be studied and analysed. Chopan watershed in Central India has been studied for sub-watershed delineation and prioritization based on drainage morphometry, land use/land cover and sediment yield index analysis using remote sensing and GIS techniques. The watershed was demarcated into five sub-watersheds on the basis of drainage flow directions, contour value, slope, elevation. Geocoded satellite data of 1989 and 2001 on 1:50 000 scale were visually interpreted to prepare land use/land cover and drainage maps which were later digitized using Arcview/ArcGIS. Linear and shape aspects of the sub-watersheds were computed and used for prioritization. The results show widespread variation in drainage characteristics, land cover changes and sediment yield rates across sub-watersheds. On the basis of morphometric, land use/land cover change and sediment yield index, sub-watersheds were grouped into low, medium and high priority. A correlation of results show that SW1 and SW5 are common sub-watersheds falling under high and low priority based on morphometric, land use change analysis and SYI. The priority list of sub-watersheds will be crucial for decision making and implementation of land and water resource conservation projects.     

基于遥感和GIS技术的朝阳地区浅层地下水富集性研究

利用遥感和GIS技术进行浅层地下水富集性快速评估,提取了与地下水赋存相关的断裂密度、地质类型、地形坡度和河流密度作为地下水赋存的影响因子,提取了土壤热惯量和植被覆盖度作为地下水赋存的指示因子,并利用层次分析法建立了浅层地下水富集性评估模型,对朝阳地区地下水富集性进行了评估。实地验证结果表明地下水富集性评估结果与实地调查出水量之间呈指数相关关系,说明利用该方法能够对研究区地下水富集性进行准确评估。     

Groundwater potential zonation for basaltic watersheds using satellite remote sensing data and GIS techniques

This paper summarizes the findings of groundwater potential zonation mapping at the Bharangi River basin, Thane district, Maharastra, India, using Satty’s Analytical Hierarchal Process model with the aid of GIS tools and remote sensing data. To meet the objectives, remotely sensed data were used in extracting lineaments, faults and drainage pattern which influence the groundwater sources to the aquifer. The digitally processed satellite images were subsequently combined in a GIS with ancillary data such as topographical (slope, drainage), geological (litho types and lineaments), hydrogeomorphology and constructed into a spatial database using GIS and image processing tools. In this study, six thematic layers were used for groundwater potential analysis. Each thematic layer’s weight was determined, and groundwater potential indices were calculated using groundwater conditions. The present study has demonstrated the capabilities of remote sensing and GIS techniques in the demarcation of different groundwater potential zones for hard rock basaltic basin.     

Evaluation of effective management plan for an agricultural watershed using AVSWAT model,remote sensing and GIS

In the present investigation, an effort has been made to identify the critical sub-watersheds for the development of best management plan for a small watershed of Eastern India using a hydrological model, namely, AVSWAT2000. A total of 180 combinations of various management treatments including crops (rice, maize ground nut and soybean), tillage (zero, conservation, field cultivator, mould board plough and conventional practices) and fertilizer levels (existing half of recommended and recommended) have been evaluated. The investigation reveled that rice cannot be replaced by other crops such as groundnut, maize, mungbean, sorghum and soybean since comparatively these crops resulted in higher sediment yield. The tillage practices with disk plough have been found to have more impact on sediment yield and nutrient losses than conventional tillage practices for the existing level of fertilizer. Sediment yield decreased in the case of zero tillage, conservation tillage, field cultivator, moldboard plough, and conservation tillage as compare to conventional tillage. Lowest NO₃–N loss was observed in zero tillage in all the fertilizer treatments, whereas field cultivator, moldboard plough and disk plough resulted in increase of NO³–N loss. As compared to conventional tillage, the losses of soluble phosphorus were increased in moldboard plough. The losses of organic nitrogen were also increased as fertilizer dose increased. After zero tillage the conservation tillage preformed better in all the fertilizer treatments as per loss of organic nitrogen and organic phosphorus is concerned. It can be concluded that the sediment yield was found to be the highest in the case of disk plough followed by moldboard plough, field cultivator, conventional tillage, field cultivator and least in zero tillage practices. The nutrient losses were found to be in different order with tillage practices, resulted highest in disk plough tillage practices. In view of sediment yield and nutrient losses, the conservation tillage practice was found to be the best as the sediment yield is less than the average soil loss whereas nutrient loss is within the permissible limit.     

Mapping groundwater recharge potential using GIS approach in Darwha block

Groundwater is the most important source of water in meeting irrigation, drinking, and other needs in India. The assessment of the potential zone for its recharge is critical for sustainable usage, quality management, and food security. This study reports alternative mapping of the groundwater recharge potential of a selected block by including large-scale soil data. Thematic layers of soil, geomorphology, slope, land use land cover, topographical wetness index, and drainage density of Darwha block (District Yavatmal, Maharashtra, India) were generated and integrated in a geographic information system environment. The topographic maps, thematic maps, field data, and satellite image were processed, classified, and weighted using analytical hierarchical process for their contribution to groundwater recharge. The layers were integrated by weighted linear combination method in the GIS environment to generate four groundwater potential zones viz., “poor,” “poor to moderate,” “moderate to high,” and “high.” Based on the generated groundwater potential map, about 9830 ha (12%) of the study area was categorized as high potential for recharge, 25,558 ha (31%) as poor to moderate, 33,398 ha (40%) as moderate to high, and 12,565 ha (15%) as poor potential zone. The zonation corresponds well with the field data on greater well density (0.22/ha) and irrigated crop area (27%) in the high potential zone as against 0.02 wells/ha and only 6% irrigated area in the poor zone. The map is recommended for use in regulating groundwater development decisions and judicious expenditure on drilling new wells by farmers and the state authorities.     

GIS and SBF for estimating groundwater recharge of a mountainous basin in the Wu River watershed,Taiwan

The temporal and spatial distributions of precipitation are extremely uneven; so, careful management of water resources in Taiwan is crucial. The long-term overexploitation of groundwater resources poses a challenge to water resource management in Taiwan. However, assessing groundwater resources in mountainous basins is challenging due to limited information. In this study, a geographic information system (GIS) and stable base-flow (SBF) techniques were used to assess the characteristics of groundwater recharge considering the Wu River watershed in central Taiwan as a study area. First, a GIS approach was used to integrate five contributing factors: lithology, land cover/land use, lineaments, drainage, and slope. The weights of factors contributing to the groundwater recharge were obtained from aerial photos, geological maps, a land use database, and field verification. Second, the SBF was used to estimate the groundwater recharge in a mountainous basin scale. The concept of the SBF technique was to separate the base-flow from the total streamflow discharge in order to obtain a measure of groundwater recharge. The SBF technique has the advantage of integrating groundwater recharge across an entire basin without complex hydro-geologic modelling and detailed knowledge of the soil characteristics. In this study, our approach for estimating recharge provides not only an estimate of how much water becomes groundwater, but also explains the characteristics of a potential groundwater recharge zone.     

Application of probabilistic-based frequency ratio model in groundwater potential mapping using remote sensing data and GIS

The main goal of this study is to investigate the application of the probabilistic-based frequency ratio (FR) model in groundwater potential mapping at Langat basin in Malaysia using geographical information system. So far, the approach of probabilistic frequency ratio model has not yet been used to delineate groundwater potential in Malaysia. Moreover, this study includes the analysis of the spatial relationships between groundwater yield and various hydrological conditioning factors such as elevation, slope, curvature, river, lineament, geology, soil, and land use for this region. Eight groundwater-related factors were collected and extracted from topographic data, geological data, satellite imagery, and published maps. About 68 groundwater data with high potential yield values of ≥11 m³/h were randomly selected using statistical software of SPSS. Then, the groundwater data were randomly split into a training dataset 70 % (48 borehole data) for training the model and the remaining 30 % (20 borehole data) was used for validation purpose. Finally, the frequency ratio coefficients of the hydrological factors were used to generate the groundwater potential map. The validation dataset which was not used during the FR modeling process was used to validate the groundwater potential map using the prediction rate method. The validation results showed that the area under the curve for frequency model is 84.78 %. As far as the performance of the FR approach is concerned, the results appeared to be quite satisfactory, i.e., the zones determined on the map being zones of relative groundwater potential. This information could be used by government agencies as well as private sectors as a guide for groundwater exploration and assessment in Malaysia.     

Delineation of groundwater potential zone in Chhatna Block, Bankura District, West Bengal, India using remote sensing and GIS techniques

Groundwater is one of the most valuable natural resources, which is an immensely important and dependable source of water supply in all climatic regions over the world. Groundwater is in demand in areas where surface water supply is inadequate and nonsexist in the Chhatna Block, Bankura district and is located on the eastern slope of Chotonagpur Plateau, which is mapped on 73 I/15, 73 I/16 and 73 M/3, and falls between latitude 23°10′–23°30′N and longitude 86°47′–87°02′E. It represents plain land and gentle slope, which is responsible for infiltration and groundwater recharge. The groundwater in this region is confined within the fracture zones and weathered residuum. The present investigation is, therefore, undertaken to delineate potential zones for groundwater development with the help of a remote-sensing study. IRS–LISS-III data along with other data sets, e.g., existing toposheets and field observation data, have been utilized to extract information on the hydrogeomorphic features which include valley fills, buried pediment moderate, buried pediment shallow and structural hills, lineament density contour and slope map of this hard rock terrain. The target of this study is to delineate the groundwater potential zones in Chhatna block, Bankura District, West Bengal. Satellite imagery, along with other data sets, has been utilized to extract information on the groundwater controlling features of this study area. Three features (hydrogeomorphology, slope, and lineaments) that influence groundwater occurrences were analyzed and integrated. All the information layers have been integrated through GIS analysis and the groundwater potential zones have been delineated. The weighted index overlay method has been followed to delineate groundwater potential zones. The results indicate that good to excellent groundwater potential zones are available in almost the entire block. The results show that there is good agreement between the predicted groundwater potential map and the existing groundwater borehole databases. The area is characterized by hard rock terrain—still due to the presence of planation surface along valley fills; it became the prospective zone. The area has been categorized into four distinct zones: excellent, good, fair and poor. Excellent groundwater potential zones constitute 30–35 % of the total block area; good groundwater potential zones occupy a majority of the block, covering approximately 55–60 % and the fair potential zones occupy about 10–15 % of the total block. Poor potential zones occupy a very insignificant portion (less than 1 %).     

Modeling forest fire risk in the northeast of Iran using remote sensing and GIS techniques

Fire in forested areas can be regarded as an environmental disaster which is triggered by either natural forces or anthropogenic activities. Fires are one of the major hazards in forested and grassland areas in the north of Iran. Control of fire is difficult, but it is feasible to map fire risk by geospatial technologies and thereby minimize the frequency of fire occurrences and damages caused by fire. The fire risk models provide a suitable concept to understand characterization of fire risk. Some models are map based, and they combine effectively different forest fire–causing variables with remote sensing data in a GIS environment for identifying and mapping forest fire risk. In this study, Structural Fire Index, Fire Risk Index, and a new index called Hybrid Fire Index were used to delineate fire risk in northeastern Iran that is subjected to frequent forest fire. Vegetation moisture, slope, aspect, elevation, distance from roads, and vicinity to settlements were used as the factors influencing accidental fire starts. These indices were set up by assigning subjective weight values to the classes of the layers based on their sensitivity ratio to fire. Hot spots data derived from MODIS satellite sensor were used to validate the indices. Assessment of the indices with receiver operating characteristic (ROC) curves shows that 76.7 % accuracy of the HFI outperformed the other two indices. According to the Hybrid Fire Index, 57.5 % of the study area is located under high-risk zone, 33 % in medium-risk zone, and the remaining 9.5 % area is located in low-risk zone.     

Integration of hydrological factors and demarcation of groundwater prospect zones: insights from remote sensing and GIS techniques

The study demonstrates the potential of geographical information system and statistical-based approaches to identify the hydrological processes and demarcate the groundwater prospect zones of the Gangolli basin, Karnataka State, India. The basin is situated in humid tropical climate and influenced by three major rivers viz. Kollur (6th order stream), Chakra (6th order stream) and Haladi (7th order stream) which cover an area of ~1,512 km² and cumulative length of ~84 km. Various thematic maps—drainage, geomorphology, geology, slope, soil, lineament and lineament density—were prepared using Survey of India topographic maps, Indian remote sensing (IRS-P6) images and other published maps. Hydrogeomorphologic characteristics were correlated with different morphometric parameters to identify the hydrological processes and demarcate the groundwater potential zones of the basin. All the hydrological units and morphometric parameters were assigned suitable weightages according to their relative importance to groundwater potentiality to identify the most deficit/surplus zones of groundwater. Based on hydrological characteristics, integrated thematic maps reveal that ~14 % (~217 km²) of basin area falls under very good, ~32 % (~486 km²) under good, ~23 % (~353 km²) under moderate, and 30 % (~443 km²) under poor zones for groundwater potential. From the sub-basin-wise prioritisation, it has been inferred that SB-III scored highest groundwater potential, followed by SB-X. Result of morphometric analyses with the hydrologic parameters indicates that ~99 % area of SB-III and SB-X are under very good to moderate groundwater potential zone. This study clearly demonstrates that hydrological parameters in relation with morphometric analyses are useful to demarcate the prospect zones of groundwater.     

Choosing appropriate techniques for quantifying groundwater recharge

Various techniques are available to quantify recharge; however, choosing appropriate techniques is often difficult. Important considerations in choosing a technique include space/time scales, range, and reliability of recharge estimates based on different techniques; other factors may limit the application of particular techniques. The goal of the recharge study is important because it may dictate the required space/time scales of the recharge estimates. Typical study goals include water-resource evaluation, which requires information on recharge over large spatial scales and on decadal time scales; and evaluation of aquifer vulnerability to contamination, which requires detailed information on spatial variability and preferential flow. The range of recharge rates that can be estimated using different approaches should be matched to expected recharge rates at a site. The reliability of recharge estimates using different techniques is variable. Techniques based on surface-water and unsaturated-zone data provide estimates of potential recharge, whereas those based on groundwater data generally provide estimates of actual recharge. Uncertainties in each approach to estimating recharge underscore the need for application of multiple techniques to increase reliability of recharge estimates. Electronic Publication     

Locating suitable sites for the construction of subsurface dams using GIS

Subsurface dams constitute an affordable and effective method for the sustainable development and management of groundwater resources when constructed on suitable sites. Such dams have rarely been constructed in crystalline rock areas and to best of our knowledge, geographic information system (GIS) has never been used in any methodology for locating suitable sites for constructing these dams. This paper presents a new methodology to locate suitable sites for the construction of subsurface dams using GIS software supported by groundwater balance modelling in a study area Boda-Kalvsvik, Sweden. Groundwater resources were calculated based on digitized geological data and assumptions regarding stratigraphic layering taken from well archive data and geological maps. These estimates were then compared with future extractions for domestic water supply using a temporally dynamic water balance model. Suitability analyses for subsurface dams were based on calculated topographic wetness index (TWI) values and geological data, including stratigraphic information. Groundwater balance calculations indicated that many of the most populated areas were susceptible to frequent water supply shortages. Of the 34 sub-catchments within the study area: ten were over-extracted, nine did not have any water supply demand at all, one was self-sufficient and the remaining 14 were able to meet the water supply demand with surplus storage capacity. Six suitable sites for the construction of subsurface dams were suggested in the vicinity of the over-extracted sites based on suitability analysis and groundwater balance estimates. The new methodology shows encouraging results for regions with humid climate but having limited natural water storage capacities. The developed methodology can be used as a preliminary planning step for subsurface dam construction, establishing a base for more detailed field investigations.     

Remote sensing and GIS for mapping groundwater recharge and discharge areas in salinity prone catchments,southeastern Australia

Identifying groundwater recharge and discharge areas across catchments is critical for implementing effective strategies for salinity mitigation, surface-water and groundwater resource management, and ecosystem protection. In this study, a synergistic approach has been developed, which applies a combination of remote sensing and geographic information system (GIS) techniques to map groundwater recharge and discharge areas. This approach is applied to an unconfined basalt aquifer, in a salinity and drought prone region of southeastern Australia. The basalt aquifer covers ~11,500 km² in an agriculturally intensive region. A review of local hydrogeological processes allowed a series of surface and subsurface indicators of groundwater recharge and discharge areas to be established. Various remote sensing and GIS techniques were then used to map these surface indicators including: terrain analysis, monitoring of vegetation activity, and mapping of infiltration capacity. All regions where groundwater is not discharging to the surface were considered potential recharge areas. This approach, applied systematically across a catchment, provides a framework for mapping recharge and discharge areas. A key component in assigning surface and subsurface indicators is the relevance to the dominant recharge and discharge processes occurring and the use of appropriate remote sensing and GIS techniques with the capacity to identify these processes.

---

Résumé Sur un bassin versant, l’identification des zones d’alimentation et des aires d’émergence des eaux souterraines est capitale pour mettre en œuvre des stratégies de réduction de la salinité, de gestion des eaux souterraines et superficielles, et de protection des écosystèmes. Une approche synergique a été développée, sur la base de recherches existantes pour cartographier de manière systématique les zones de recharge et d'émergence. Elle combine des techniques de télédétection et de Systèmes d’Information Géographique, dans le but de cartographier les zones d’alimentation et d’émergence. Ces techniques ont été appliquées à un aquifère basaltique libre, dans un secteur sujet à la sécheresse et à la salinité du Sud-Est australien. L’aquifère considéré couvre environ 11,500 km² d’une région essentiellement agricole. Un inventaire des processus hydrogéologiques locaux a conduit à l’établissement d’une série d’indicateurs superficiels et subsuperficiels des zones d’alimentation et d’émergence. Plusieurs méthodes de télédétection et de SIG furent alors utilisées pour cartographier ces indicateurs de surface, y compris les analyses de terrain, le suivi de l’activité de la végétation et la cartographie des capacités d’infiltration. Toutes les régions en dehors des zones d'émergence sont considérées commes des zones d'alimentation potentielles. Un des composants clés de l’attribution des indicateurs superficiels et subsuperficiels est la concordance avec les processus majeurs d’alimentation et de prélèvement entrant en jeu, et l’utilisation de méthodes de télédétection et SIG adaptées permettant d’identifier ces processus.

---

Resumen La identificación de áreas de descarga y recarga de agua subterránea es crítica para la implementación de estrategias efectivas relacionadas con mitigación de salinidad, gestión de recursos de agua subterránea y agua superficial, y protección de ecosistemas. En este estudio se ha desarrollado un enfoque sinérgico apoyándose en investigación existente el cual aplica una combinación de técnicas de sistemas de información geográfico (SIG) y sensores remotos para cartografiar áreas de recarga y descarga de agua subterránea. Este enfoque se aplica a un acuífero de basalto no confinado en una región del sureste de Australia propensa a sequía y salinidad. El acuífero de basalto cubre aproximadamente 11,500 km² en una región con agricultura intensiva. Una revisión de los procesos hidrogeológicos locales permitió el establecimiento de una serie de indicadores superficiales y subterráneos de áreas de recarga y descarga de agua subterránea. Luego se utilizaron varias técnicas de SIG y sensores remotos para cartografiar estos indicadores superficiales incluyendo: análisis del terreno, monitoreo de la actividad de la vegetación, y cartografiado de la capacidad de infiltración. Todas las regiones donde el agua subterránea no descarga en la superficie fueron consideradas áreas potenciales de recarga. Este enfoque que se ha aplicado sistemáticamente a través de la cuenca aporta un marco para la cartografía de áreas de recarga y descarga. Un componente clave en la asignación de indicadores superficiales y subterráneos lo constituye la relevancia a los procesos dominantes de recarga y descarga que ocurren y el uso de técnicas apropiadas de SIG y sensores remotos con la capacidad para identificar esos procesos.