How hydrological factors initiate instability in a model sandy slope

Knowledge of the mechanisms of rain‐induced shallow landslides can improve the prediction of their occurrence and mitigate subsequent sediment disasters. Here, we examine an artificial slope's subsurface hydrology and propose a new slope stability analysis that includes seepage force and the down‐slope transfer of excess shear forces. We measured pore water pressure and volumetric water content immediately prior to a shallow landslide on an artificial sandy slope of 32°: The direction of the subsurface flow shifted from downward to parallel to the slope in the deepest part of the landslide mass, and this shift coincided with the start of soil displacement. A slope stability analysis that was restricted to individual segments of the landslide mass could not explain the initiation of the landslide; however, inclusion of the transfer of excess shear forces from up‐slope to down‐slope segments improved drastically the predictability. The improved stability analysis revealed that an unstable zone expanded down‐slope with an increase in soil water content, showing that the down‐slope soil initially supported the unstable up‐slope soil; destabilization of this down‐slope soil was the eventual trigger of total slope collapse. Initially, the effect of apparent soil cohesion was the most important factor promoting slope stability, but seepage force became the most important factor promoting slope instability closer to the landslide occurrence. These findings indicate that seepage forces, controlled by changes in direction and magnitude of saturated and unsaturated subsurface flows, may be the main cause of shallow landslides in sandy slopes. Copyright © 2013 John Wiley & Sons, Ltd.     

Modelling of the retreat process of composite riverbank in the Jingjiang Reach using the improved BSTEM

Bank retreat in the Jingjiang Reach is closely related not only to the near‐bank intensity of fluvial erosion but also to the composition and mechanical properties of bank soils. Therefore, it is necessary to correctly simulate bank retreat to determine the characteristics of fluvial processes in the Jingjiang Reach. The current version of bank stability and toe erosion model (5.4) was improved to predict riverbank retreat, by inputting a dynamic water table, and calculating the approximation of the distribution of dynamic pore water pressure in the soil near the river bank face, and considering the depositional form of the failed blocks, which is assumedly based on a triangular distribution, with the slope approximately equalling the stable submerged bank slope and half of collapsed volume deposited in the bank‐toe region. The degrees of riverbank stability at Jing34 were calculated using the improved bank stability and toe erosion model. The results indicate the following trends: (a) the degrees of riverbank stability were high during the dry season and the rising stage, which led to minimal bank failure, and (b) the stability degrees were low during the flood season and the recession stage, with the events of bank collapse occurring frequently, which belonged to a stage of intensive bank erosion. Considering the effects of bank‐toe erosion, water table lag, and the depositional form of the collapsed bank soil, the bank‐retreat process was simulated at the right riverbank of Jing34. The model‐predicted results exhibit close agreement with the measured data, including the total bank‐retreat width and the collapsed bank profile. A sensitivity analysis was conducted to determine the quantitative effects of toe erosion and water table lag on the degree of bank stability. The calculated results for toe erosion indicate that the amount of toe erosion was largest during the flood season, which was a primary reason for bank failure. The influence of water table lag on the degree of stability demonstrates that water table lag was an important cause of bank failure during the recession stage.     

Landslide Amplification by Liquefaction of Runout‐Path Material after the 2008 Wenchuan (M 8·0) Earthquake,China

Here, we propose that an earthquake can trigger the failure of a landslide mass while simultaneously triggering liquefaction of runout‐path materials before the arrival of the landslide mass, thus greatly increasing the size and mobility of an overriding landslide. During the 2008 Wenchuan earthquake, about 60 000 landslides were triggered, directly resulting in about 20 000 casualties. While these landslides mainly originated from steep slopes, some landslides with high mobility formed in colluvial valley deposits. Among these, the most catastrophic was the Xiejiadian landslide in Pengzhou city, which traveled hundreds of meters before coming to rest. Through field investigation and laboratory testing, we conclude that this landslide primarily formed from colluvial deposits in the valley and secondarily from failure of slopes in granitic rock located uphill. Much of the granitic slope failure was deposited in the upper part of the travel path (near the slide head); the remainder was dispersed throughout the main landslide deposit. Superposition of deposits at the landslide toe indicates that landslide debris derived from colluvial soil was deposited first. The deposits at the landslide toe displayed flow characteristics, such as fine materials comprising basal layers and large boulders covering the deposit surface. We hypothesize that the main part of the landslide resulted from seismogenic liquefaction of valley colluvium, rather than from liquefaction potentially caused by undrained loading from the granitic slope failures impacting the colluvium. To examine the likelihood that seismogenic liquefaction occurred, we took samples from different areas of the landslide deposit and performed undrained cyclic shear tests on them in the laboratory. The results showed that the sandy soils that comprise most of the deposit are highly liquefiable under seismic loading. Therefore, we conclude that liquefaction of the colluvium in the valley during the earthquake was the main reason for this rapid (~46 m/s) long‐runout (1·7 km) landslide. Copyright © 2012 John Wiley & Sons, Ltd.     

A catastrophic flowslide that overrides a liquefied substrate: the 1983 Saleshan landslide in China

Flowslides that override a liquefied substrate can vastly enhance a disaster after failure initiation. These effects may result from the rapid velocity and long runout distance from slides mobilized into flows. It is thus crucial to provide an improved understanding of the transformation mechanisms of catastrophic flowslides for hazard evaluation. This study examines the Saleshan landslide in Gansu, China, which occurred in 1983 and killed more than 200 people. The Saleshan landslide travelled for approximately 1 km due to pore water pressure generation resulting from overrunning and liquefication of the alluvial sands in the river valley below. We used geomorphologic and topographic maps to determine its dynamic features and mobilization behaviors on the landslide body, and placemarks and seismic signals to identify its approximate velocity at different sites. Electrical resistivity tomography (ERT) surveys also revealed the hydrogeological conditions post-landslide, showing a clear groundwater table along with the liquefied alluvial sand and gravel layers. Particle size distributions and triaxial shear behaviors confirmed more ready liquefaction of superficial loess and underlying alluvial sand in comparison with the red soil above and below them. Novel loading impact triaxial testing was also performed on the alluvial sand to elucidate its liquefaction potential in undrained and drained conditions. The alluvial sand was found to be markedly prone to liquefaction in undrained conditions due to impact-induced increased pore water pressure. The results further demonstrated that the Saleshan landslide underwent a transformation from a slowing slide on a steep slope, where it originated, to flow on a nearly flat terrace with abundant groundwater that it overrode. The transformation mechanism involved the liquefied alluvium sand substrate, which greatly enhanced the landslide mobility. Along with recent, similar findings from landslides globally, substrate liquefaction may result in a widespread, significant increase in landslide mobility and thus hazard, and the present study identifies the requisite conditions for this phenomenon to occur.     

Seepage erosion and its implication to the formation of amphitheatre valley heads: A case study at Obara,Japan

Seepage erosion was investigated in an amphitheatre with a semicircular valley head, steep slopes, and a flat bottom developed in granodiorite hills at Obara, Aichi prefecture, Japan. A high sediment yield occurred where the measuring sites were located at the base of the landslide debris in the base of the convex slopes, whereas sediment outflows were small where the measuring sites were located at the base of the strong convex slopes. This implies that the seepage erosion was an effective agent for removal of debris deposited at the base of the slope. Small landslides can be found at the lower slopes within the area of the observed amphitheatre. The slope stability analysis and subsurface water observation of the lower slope suggest that the small landslides in this amphitheatre are due to over-steepened slopes, and relatively insensitive to subsurface water status. Colluvium in the flat valley bottom thinly covers the bedrock surface. Therefore the topography of the amphitheatre was found to be formed by parallel retreat of slopes by the repetition of basal seepage erosion and subsequent small landslides.     

Response mechanism of post-earthquake slopes under heavy rainfall

This paper uses the catastrophic landslide that occurred in Zhongxing Town, Dujiangyan City, as an example to study the formation mechanism of landslides induced by heavy rainfall in the post-Wenchuan earthquake area. The deformation characteristics of a slope under seismic loading were investigated via a shaking table test. The results show that a large number of cracks formed in the slope due to the tensile and shear forces of the vibrations, and most of the cracks had angles of approximately 45° with respect to the horizontal. A series of flume tests were performed to show how the duration and intensity of rainfall influence the responses of the shaken and non-shaken slopes. Wetting fronts were recorded under different rainfall intensities, and the depth of rainfall infiltration was greater in the shaken slope than in the non-shaken slope because the former experienced a greater extreme rainfall intensity under the same early rainfall and rainfall duration conditions. At the beginning of the rainfall infiltration experiment, the pore water pressure in the slope was negative, and settling occurred at the top of the slope. With increasing rainfall, the pore water pressure changed from negative to positive, and cracks were observed on the back surface of the slope and the shear outlet of the landslide on the front of the slope. The shaken slope was more susceptible to crack formation than the non-shaken slope under the same rainfall conditions. A comparison of the responses of the shaken and non-shaken slopes under heavy rainfall revealed that cracks formed by earthquakes provided channels for infiltration. Soil particles in the cracks of slopes were washed away, and the pore water pressure increased rapidly, especially the transient pore water pressure in the slope caused by short-term concentrated rainfall which decreased rock strength and slope stability.     

Landslide inventories and their statistical properties

Landslides are generally associated with a trigger, such as an earthquake, a rapid snowmelt or a large storm. The landslide event can include a single landslide or many thousands. The frequency–area (or volume) distribution of a landslide event quanti?es the number of landslides that occur at different sizes. We examine three well‐documented landslide events, from Italy, Guatemala and the USA, each with a different triggering mechanism, and ?nd that the landslide areas for all three are well approximated by the same three‐parameter inverse‐gamma distribution. For small landslide areas this distribution has an exponential ‘roll‐over’ and for medium and large landslide areas decays as a power‐law with exponent ‐2·40. One implication of this landslide distribution is that the mean area of landslides in the distribution is independent of the size of the event. We also introduce a landslide‐event magnitude scale m_L = log(N_LT), with N_LT the total number of landslides associated with a trigger. If a landslide‐event inventory is incomplete (i.e. smaller landslides are not included), the partial inventory can be compared with our landslide probability distribution, and the corresponding landslide‐event magnitude inferred. This technique can be applied to inventories of historical landslides, inferring the total number of landslides that occurred over geologic time, and how many of these have been erased by erosion, vegetation, and human activity. We have also considered three rockfall‐dominated inventories, and ?nd that the frequency–size distributions differ substantially from those associated with other landslide types. We suggest that our proposed frequency–size distribution for landslides (excluding rockfalls) will be useful in quantifying the severity of landslide events and the contribution of landslides to erosion. Copyright © 2004 John Wiley & Sons, Ltd.     

Evolution of the north flank of Tenerife by recurrent giant landslides

Geomorphologic analysis of submarine and subaerial surface features using a combined topographic/bathymetric digital elevation model coupled with onshore geological and geophysical data constrain the age and geometry of giant landslides affecting the north flank of Tenerife. Shaded relief and contour maps, and topographic profiles of the submarine north flank, permit the identification of two generations of post-shield landslides. Older landslide materials accumulated near the shore (<40-km) and comprise 700 km³ of debris. Thickening towards a prominent axis suggests one major landslide deposit. Younger landslide materials accumulated 40–70 km offshore and comprise the products of three major landslides: the La Orotava landslide complex, the Icod landslide and the East Dorsal landslide complex, each with an onshore scar, a proximal submarine trough, and a distal deposit lobe. Estimated lobe volumes are 80, 80 and 100 km³, respectively. The old post-shield landslide scar is an amphitheatre, 20–25 km wide, partly submarine, now completely filled with younger materials. Age–width relationships for Tenerife's coastal platform plus onshore geological constraints suggest an age of ca. 3 Ma for the old collapse. Young landslides are all less than 560 ka old. The La Orotava and Icod slides involved failures of slabs of subaerial flank to form the subaerial La Orotava and Icod valleys. Offshore, they excavated troughs by sudden loading and basal erosion of older slide debris. The onshore East Dorsal slide also triggered secondary failure of older debris offshore. The slab-like geometry of young failures was controlled by weak layers, deep drainage channels and flank truncation by marine erosion. The (partly) submarine geometry of the older amphitheatre reflects the absence of these features. Relatively low H/L ratios for the young slides are attributed to filling of the slope break at the base of the submarine edifice by old landslide materials, low aspect ratios of the failed slabs and channelling within troughs. Post-shield landslides on Tenerife correlate with major falls in sea level, reflecting increased rates of volcanism and coastal erosion, and reduced support for the flank. Landslide head zones have strongly influenced the pattern of volcanism on Tenerife, providing sites for major volcanic centres.     

The proximal part of the giant submarine Wailau landslide, Molokai, Hawaii

The main break-in-slope on the northern submarine flank of Molokai at −1500 to −1250 m is a shoreline feature that has been only modestly modified by the Wailau landslide. Submarine canyons above the break-in-slope, including one meandering stream, were subaerially carved. Where such canyons cross the break-in-slope, plunge pools may form by erosion from bedload sediment carried down the canyons. West Molokai Volcano continued infrequent volcanic activity that formed a series of small coastal sea cliffs, now submerged, as the island subsided. Lavas exposed at the break-in-slope are subaerially erupted and emplaced tholeiitic shield lavas. Submarine rejuvenated-stage volcanic cones formed after the landslide took place and following at least 400–500 m of subsidence after the main break-in-slope had formed. The sea cliff on east Molokai is not the headwall of the landslide, nor did it form entirely by erosion. It may mark the location of a listric fault similar to the Hilina faults on present-day Kilauea Volcano. The Wailau landslide occurred about 1.5 Ma and the Kalaupapa Peninsula most likely formed 330±5 ka. Molokai is presently stable relative to sea level and has subsided no more than 30 m in the last 330 ka. At their peak, West and East Molokai stood 1.6 and 3 km above sea level. High rainfall causes high surface runoff and formation of canyons, and increases groundwater pressure that during dike intrusions may lead to flank failure. Active shield or postshield volcanism (with dikes injected along rift zones) and high rainfall appear to be two components needed to trigger the deep-seated giant Hawaiian landslides.     

降雨和地震耦合作用对滑坡稳定性的影响——以甘肃西和Ⅲ号滑坡为例

以甘肃省西和县西山Ⅲ号滑坡为例分析了地震与降雨耦合作用对滑坡稳定性的影响。采用GEOSTUDIO软件对其进行了天然及地震降雨耦合作用两种条件下的数值模拟。通过计算结果对比可知,西山Ⅲ号滑坡在天然状态下处于稳定状态;地震降雨耦合作用对西山Ⅲ号滑坡的稳定会起到很强的削弱作用,滑坡将处于失稳状态。在此处采用的计算条件下,相同降雨量下地震与不同降雨强度的耦合作用显示,降雨强度越小雨水入渗相对越多,地震作用下超孔隙水压力影响区域越大,滑坡越不稳定。     

The safety distance of a tunnel under-traversing a slope body with a landslide-prone zone

At present, substantial scientific research achievements have been made in the research on landslide occurrence, movement mechanism, mitigation measures, and structural stability during tunnel excavation. However, the interaction mechanism of a tunnel under-traversing a slope body with potential landslides is still not well understood. Based on the field data provided by previous investigations in the study area, six sets of 1:100 laboratory experiment model tests were conducted to study the stability of the landslide-prone zone of the slope body with an under-traversing tunnel. The selected distances between the tunnel and the sliding surface are 1.5, 3, and 5 times of the tunnel diameter, respectively. The experiment results show the interaction between the landslide-prone zone and the tunnel, elucidating the effect of potential landslides during the tunnel excavation process and the reaction of the landslide slip on the tunnel structure. Several conclusions are obtained: ① During the process of tunnel excavation, the vertical displacement of the tunnel vault decreases with the increase of the buried depth. ② The vertical displacement of the sliding surface increases with the increase of the buried depth of the tunnel. The horizontal displacement of sliding surface decreases with the increase of the buried depth. ③ After the occurrence of a rainfall-induced landslide, the vertical displacement of the tunnel vault in the 1.5-diameter-distance case is 57.29% greater than that in the 3.0-dismeter-distance case.④ For a two-cave tunnel, it is suggested that the cave farther from the landslide toe should be firstly excavated since it may generate less structural deformation.     

非饱和黄土动力液化研究——以党家岔滑坡为例

黄土具有极强的水敏性和动力易损性，黄土地区多次强震都引起过液化、滑坡等地质灾害，造成了严重的人员伤亡和财产损失，因此振动作用下高含水率黄土的液化问题不容忽视。在大量已有研究的基础上，以宁夏党家岔滑坡为例，研究振动作用下高含水率黄土的液化问题。现场调查发现高含水率滑带土并未达到完全饱和状态（饱和度达95%左右），在新鲜的芯样断面发现有明显的"流态化"液化破坏特征。借助室内试验和数值模拟技术，对党家岔滑坡非饱和黄土层的液化性能及液化发生机理进行分析。结果表明：（1）非饱和黄土层液化发生机理可概括为：地震作用下饱和黄土层孔隙水压力激增，高含水率非饱和黄土层孔压增长响应滞后，随着孔隙水压朝上部消散，地下水向上渗流，当平均有效应力接近0时，高含水率非饱和黄土层发生液化；（2）振动过程中不同饱和度黄土孔隙水压力增长响应具有滞后性，借鉴饱和黄土液化时孔压比的判别标准和Seed简化判别法，初步证实党家岔滑坡高含水率非饱和黄土层可发生振动液化，斜坡前缘和中部土体发生液化的初始饱和度范围分别为68.3%~100%和73.8%~100%，斜坡后缘土体不发生液化。     

The temporal and spatial development of landslides in the axmouth-lyme regis undercliffs national nature reserve,Devon

A chronology of landsliding is presented, including suggestions as to a date for initiation. Periods of activity known from historical sources are correlated with known periods of climatic deterioration. The current morphology of the landslide slopes is closely related to the geological succession and structure. These permit the landslides and their development to be differentiated on the basis of whole slope and toe morphology, and much of the whole-slope activity can be related to conditions at the toe. Examples of geomorphological maps, slope categories maps, and cross sections are presented along with an example of the ‘evolutionary’ maps which may be derived from Ordnance Survey plans and aerial photographs. These generally indicate that weakening of materials by weathering, seepage erosion at the toe, and marine erosion result in frequent mass movement events of a low magnitude. These events ultimately influence the stability of larger slipped blocks behind, which fail less frequently. It is suggested that whole-slope failures in this region have a maximum frequency of once in 120 to 150 years, and that problems of interpretation of historical accounts may mean that it is very much less frequent than this.     

Basal‐topographic control of stationary ponds on a continuously moving landslide

The Slumgullion landslide in the San Juan Mountains of southwestern Colorado has been moving for at least the last few hundred years and has multiple ponds on its surface. We have studied eight ponds during 30 trips to the landslide between July 1998 and July 2007. During each trip, we have made observations on the variability in pond locations and water levels, taken ground‐based photographs to document pond water with respect to moving landslide material and vegetation, conducted Global Positioning System surveys of the elevations of water levels and mapped pond sediments on the landslide surface. Additionally, we have used stereo aerial photographs taken in October 1939, October 1940 and July 2000 to measure topographic profiles of the eight pond locations, as well as a longitudinal profile along the approximate centerline of the landslide, to examine topographic changes over a 60‐ to 61‐year period of time. Results from field observations, analyses of photographs, mapping and measurements indicate that all pond locations have remained spatially stationary for 60–300 years while landslide material moves through these locations. Water levels during the observation period were sensitive to changes in the local, spring‐fed, stream network, and to periodic filling of pond locations by sediment from floods, hyperconcentrated flows, mud flows and debris flows. For pond locations to remain stationary, the locations must mimic depressions along the basal surface of the landslide. The existence of such depressions indicates that the topography of the basal landslide surface is irregular. These results suggest that, for translational landslides that have moved distances larger than the dimensions of the largest basal topographic irregularities (about 200 m at Slumgullion), landslide surface morphology can be used as a guide to the morphology of the basal slip surface. Because basal slip surface morphology can affect landslide stability, kinematic models and stability analyses of translational landslides should attempt to incorporate irregular basal surface topography. Additional implications for moving landslides where basal topography controls surface morphology include the following: dateable sediments or organic material from basal layers of stationary ponds will yield ages that are younger than the date of landslide initiation, and it is probable that other landslide surface features such as faults, streams, springs and sinks are also controlled by basal topography. The longitudinal topographic profile indicated that the upper part of the Slumgullion landslide was depleted at a mean vertical lowering rate of 5.6 cm/yr between 1939 and 2000, while the toe advanced at an average rate of 1.5 m/yr during the same period. Therefore, during this 61‐year period, neither the depletion of material at the head of the landslide nor continued growth of the landslide toe has decreased the overall movement rate of the landslide. Continued depletion of the upper part of the landslide, and growth of the toe, should eventually result in stabilization of the landslide. Published in 2008 by John Wiley & Sons, Ltd.     

Hydro-geomorphic behavior of contrasting tropical landscapes and critical zone response to changing climate

The potentially important influence of climate change on landscape evolution and on critical zone processes is not sufficiently understood. The relative contribution of hydro-climatic factors on hillslope erosion rates may significantly vary with topography at the watershed scale. The objective of this study is to quantify the hydro-geomorphic behavior of two contrasting landscapes in response to different climate change scenarios in the Luquillo Critical Zone Observatory, a site of particular geomorphological interest, in terms of hillslope erosion and rainfall-triggered landslides. We investigate the extent to which hillslope erosion and landslide occurrence remain relatively invariant with future hydro-climatic perturbations. The adjacent Mameyes and Icacos watersheds are studied, which are underlain by contrasting lithologies. A high resolution coupled hydro-geomorphic model based on tRIBS (Triangulated Irregular Network-based Real-time Integrated Basin Simulator) is used. Observations of landslide activity and hillslope erosion are used to evaluate the model performance. The process-based model quantifies feedbacks among different hydrologic processes, landslide occurrence, and topsoil erosion and deposition. Simulations suggest that the propensity for landslide occurrence in the Luquillo Mountains is controlled by tropical storms, subsurface water flow, and by non-climatic factors, and is expected to remain significant through 2099. The Icacos watershed, which is underlain by quartz diorite, is dominated by relatively large landslides. The relative frequency of smaller landslides is higher at the Mameyes watershed, which is underlain by volcaniclastic rock. While projections of precipitation decrease at the study site may lead to moderate decline in hillslope erosion rates, the simulated erosional potential of the two diverse landscapes likely remains significant. © 2018 John Wiley & Sons, Ltd.     

Quantifying rainfall controls on catchment‐scale landslide erosion in Taiwan

Landslide erosion is a dominant hillslope process and the main source of stream sediment in tropical, tectonically active mountain belts. In this study, we quantified landslide erosion triggered by 24 rainfall events from 2001 to 2009 in three mountainous watersheds in Taiwan and investigated relationships between landslide erosion and rainfall variables. The results show positive power‐law relations between landslide erosion and rainfall intensity and cumulative rainfall, with scaling exponents ranging from 2·94 to 5·03. Additionally, landslide erosion caused by Typhoon Morakot is of comparable magnitude to landslide erosion caused by the Chi‐Chi Earthquake (M_W = 7·6) or 22–24 years of basin‐averaged erosion. Comparison of the three watersheds indicates that deeper landslides that mobilize soil and bedrock are triggered by long‐duration rainfall, whereas shallow landslides are triggered by short‐duration rainfall. These results suggest that rainfall intensity and watershed characteristics are important controls on rainfall‐triggered landslide erosion and that severe typhoons, like high‐magnitude earthquakes, can generate high rates of landslide erosion in Taiwan. Copyright © 2012 John Wiley & Sons, Ltd.     

基于降雨入渗的Newmark模型改进及地震滑坡危险性预测研究

滑坡是一种破坏性非常强的地质灾害,其中地震与降雨均为诱导滑坡发生的关键因素。从降雨期间发生地震的角度考虑,基于Green-Ampt降雨入渗模型对Newmark模型进行改进,推导两因素耦合作用下的边坡安全系数F_S。以云南省鲁甸县某一区域为例,分别开展无降雨、降雨无积水与降雨积水三种情况下的地震滑坡危险性预测及坡度与入渗深度因子对位移影响分析。通过比较上述三种情况,得到研究区域内的Newmark累积位移分布及危险性区划。结果表明：与未降雨情况相比,后两种情况下地震滑坡高危险程度区域面积占比计算区域随着降雨时间的增加从1%分别提高至9%、12%,滑坡低危险程度区域面积从51%分别降低至35%、33%;坡度值与入渗深度值越大,滑坡位移越大,危险性越高。Newmark改进模型充分考虑了降雨对地震滑坡产生的促进作用,能更好地反映出研究区每个场点相对的滑坡危险性,对滑坡危险性预测具有一定指导意义。     

Experimental study of rill bank collapse

Rill bank collapse is an important component in the adjustment of channel morphology to changes in discharge and sediment flux. Sediment inputs from bank collapse cause abrupt changes in flow resistance, flow patterns and downstream sediment concentrations. Generally, bank retreat involves gradual lateral erosion, caused by flow shear stress, and sudden bank collapse, triggered by complex interactions between channel flow and bank and soil water conditions. Collapse occurs when bank height exceeds the critical height where gravitational forces overcome soil shear strength. An experimental study examined conditions for collapse in eroding rill channels. Experiments with and without a deep water table were carried out on a meandering rill channel in a loamy sand and sandy loam in a laboratory flume under simulated rainfall and controlled runon. Different discharges were used to initiate knickpoint and rill incision. Soil water dynamics were monitored using microstandpipes, tensiometers and time domain reflectometer probes (TDR probes). Bank collapse occurred with newly developed or rising pre‐existing water tables near rill banks, associated with knickpoint migration. Knickpoint scour increased effective bank height, caused positive pore water pressure in the bank toe and reduced negative pore pressures in the unsaturated zone to near zero. Matric tension in unsaturated parts of the bank and a surface seal on the ‘interrill’ zone behind the bank enhanced stability, while increased effective bank height and positive pore water pressure at the bank toe caused instability. With soil water contents >35 per cent (sandy loam) and >23 per cent (loamy sand), critical bank heights were 0·11–0·12 m and 0·06–0·07 m, respectively. Bank toe undercutting at the outside of the rill bends also triggered instability. Bank displacement was quite different on the two soils. On the loamy sand, the failed block slid to the channel bed, revealing only the upper half of the failure plane, while on the sandy loam the failed block toppled forwards, exposing the failure plane for the complete bank height. This study has shown that it is possible to predict location, frequency and magnitude of the rill bank collapse, providing a basis for incorporation into predictive models for hillslope soil loss or rill network development. Copyright © 2006 John Wiley & Sons, Ltd.     

Chronology analysis of huge landslide based on ESR dating materials on sliding face in carbonate areas of south eastern Tibet

Determining occurrence age is key to chronology analysis of huge landslides. However, in carbonated bedrock areas, it is difficult to carry out geochronological surveys of landslide evolution due to lack of suitable dating materials and methods. In carbonated bedrock areas, the cosmic nuclides 36Cl and 14C dating methods have been used for obtaining the exposed age of bedrock. But intense weathering, erosion and dissolution make it difficult to obtain an accurate total amount of cosmogenic nuclide accumulation, resulting in the dating results being affected greatly by weathering, erosion and dissolution of carbonate rock. Therefore, it is necessary to find new dating materials or methods for determining the occurrence age of landslide in carbonate bedrock areas with little quaternary sediments. In this study, a huge landslide developed in the carbonate bedrock area of south eastern Tibet is introduced briefly, which is named the Qiaojia landslide and blocked the Jinsha River. A thin layer including three obvious recrystallized carbonate sub-layers was formed in the sliding zone, indicating different sliding events. Three recrystallized carbonate samples were then collected for ESR dating research to obtain the age information of the Qiaojia landslide: one occurred 79 ± 8 ka years ago, and the other occurred 60 ± 10 ka years ago, and the third occurred 25 ± 2 ka years ago, which are in general agreement with other studies in the surrounding of the study area. It suggests that recrystallized carbonate on sliding face is suitable for chronologically identifying landslide activity by using ESR method in the carbonate area, especially in the areas with little or no quaternary sediments.     

Seasonal transition of hydrological processes in a slow‐moving landslide in a snowy region

A comprehensive understanding of seasonal hydrological dynamics is required to describe the influence of pore‐water pressure on the stability of landslides in snowy regions. This study reports on the results of continuous meteorological and hydrological observations over 2 years on a landslide body comprising Neogene sedimentary rocks in northern Japan, where a thick (3–5 m) seasonal snowpack covers the land surface. Monitoring of the volumetric water content in shallow unsaturated zones (<0.8 m depth) and pore‐water pressure in saturated bedrock at depths of 2.0 and 5.2 m revealed clear seasonality in hydrological responses to rainfall and meltwater supply. During snow‐free periods, both the shallow soil moisture and deep pore‐water pressure responded rapidly to intense rainwater infiltration. In contrast, during snowmelt, the deep pore pressure fluctuated in accordance with the daily cycle of meltwater input, without notable changes in shallow moisture conditions. During occasional foehn events that cause intense snow melting in midwinter, meltwater flows preferentially through the layered snowpack, converging to produce a localized water supply at the ground surface. This episodically triggers a significant rise in pore‐water pressure. The seasonal differences in hydrological responses were characterized by a set of newly proposed indices for the magnitude and quickness of increases in the pressure head near the sliding surface. Under snow‐covered conditions, the magnitude of the pressure increase tends to be suppressed, probably owing to a reduction in infiltration caused by a seasonal decrease in the permeability of surface soils, and effective pore‐water drainage through the highly conductive colluvial layer. Deep groundwater flow within bedrock remained in a steady upwelling state, enhanced by increasing moisture in shallow soils under snow cover, reflecting the convergence of subsurface water from surrounding hillslopes.