Effects of vegetation on flow and sediment transport: comparative analyses and validation of predicting models

The presence of vegetation modifies flow and sediment transport in alluvial channels and hence the morphological evolution of river systems. Plants increase the local roughness, modify flow patterns and provide additional drag, decreasing the bed‐shear stress and enhancing local sediment deposition. For this, it is important to take into account the presence of vegetation in morphodynamic modelling. Models describing the effects of vegetation on water flow and sediment transport already exist, but comparative analyses and validations on extensive datasets are still lacking. In order to provide practical information for modelling purposes, we analysed the performance of a large number of models on flow resistance, vegetation drag, vertical velocity profiles and bed‐shear stresses in vegetated channels. Their assessments and applicability ranges are derived by comparing their predictions with measured values from a large dataset for different types of submerged and emergent vegetation gathered from the literature. The work includes assessing the performance of the sediment transport capacity formulae of Engelund and Hansen and van Rijn in the case of vegetated beds, as well as the value of the drag coefficient to be used for different types of vegetation and hydraulic conditions. The results provide a unique comparative overview of existing models for the assessment of the effects of vegetation on morphodynamics, highlighting their performances and applicability ranges. Copyright © 2014 John Wiley & Sons, Ltd.     

The effect of a small vegetation dieback event on salt marsh sediment transport

Vegetation is a critical component of the ecogeomorphic feedbacks that allow a salt marsh to build soil and accrete vertically. Vegetation dieback can therefore have detrimental effects on marsh stability, especially under conditions of rising sea levels. Here, we report a variety of sediment transport measurements associated with an unexpected, natural dieback in a rapidly prograding marsh in the Altamaha River Estuary, Georgia. We find that vegetation mortality led to a significant loss in elevation at the dieback site as evidenced by measurements of vertical accretion, erosion, and surface topography compared to vegetated reference areas. Below-ground vegetation mortality led to reduced soil shear strength. The dieback site displayed an erosional, concave-up topographic profile, in contrast to the reference sites. At the location directly impacted by the dieback, there was a reduction in flood dominance of suspended sediment concentration. Our work illustrates how a vegetation disturbance can at least temporarily reverse the local trajectory of a prograding marsh and produce complex patterns of sediment transport. © 2018 John Wiley & Sons, Ltd.     

The impact of submersed aquatic vegetation on the development of river mouth bars

This work is inspired by the sudden resurgence of the submersed aquatic vegetation (SAV) bed in the Chesapeake Bay (USA). Because the SAV bed occurs at the mouth of the Bay's main tributary (Susquehanna River), it plays a significant role in modulating sediment and nutrient inputs from the Susquehanna to the Bay. Previous model studies on the impact of submersed aquatic vegetation on the development of river mouth bars lacked a complete mechanistic understanding. This study takes advantage of new advances in 3D computational models that include explicit physical-sedimentological feedbacks to obtain this understanding. Specifically, we used Delft3D, a state-of-the-art hydrodynamic model that provides fine-scale computations of three-dimensional flow velocity and bed shear stress, which can be linked to sediment deposition and erosion. Vegetation is modeled using a parameterization of hydraulic roughness that depends on vegetation height, stem density, diameter, and drag coefficient. We evaluate the hydrodynamics, bed shear stresses, and sediment dynamics for different vegetation scenarios under conditions of low and high river discharge. Model runs vary the vegetation height, density, river discharge, and suspended-sediment concentration. Numerical results from the idealized model show that dense SAV on river mouth bars substantially diverts river discharge into adjacent channels and promotes sediment deposition at ridge margins, as well as upstream bar migration. Increasing vegetation height and density forms sandier bars closer to the river mouth and alteration of the bar shape. Thus, this study highlights the important role of SAV in shaping estuarine geomorphology, which is especially relevant for coastal management. © 2019 John Wiley & Sons, Ltd.     

波浪条件下刚性植被茎干紊流对沉积物再悬浮的促进作用

浅水湖泊沉积物再悬浮过程促进了沉积物内源性物质的释放,造成湖泊水体内源污染,加剧湖泊水质污染与生态恶化.开展刚性植被不同分布格局下的沉积物再悬浮水槽试验,能为浅水草型湖泊、滨海湿地等水环境治理与生态修复提供理论参考.本研究通过开展实验室波浪水槽试验,检验了3种直径12种密度的刚性模型植被对波浪扰动白洋淀沉积物再悬浮的影响,通过测定不同植被情景不同波浪条件下的瞬时速度和沉积物再悬浮浓度,详细阐述了植被产生的紊动能对沉积物再悬浮临界状态的影响,构建并验证了沉积物再悬浮植被紊流模型,预测了沉积物再悬浮的临界速度,为湿地生态恢复与保护提供参考.结果表明：1）植被的存在能有效增加近床面的紊动能;2）紊动能是控制沉积物再悬浮的关键性因素;3）沉积物再悬浮的临界波速与植被的固相体积分数相关.     

The effect of single vegetation elements on wind speed and sediment transport in the Sahelian zone of Burkina Faso

Soil loss caused by wind erosion is a widespread phenomenon in the Sahelian zone of West Africa. According to Sahelian farmers, scattered vegetation standing in amongst the crop has the potential for a wind erosion control strategy. This study was conducted to study the effect of single vegetation elements on the pattern of average wind speed and sediment transport. This was done by two experiments that were carried out during the rainy seasons of 2002 and 2003 in north Burkina Faso, West Africa. Wind speeds were measured using three sonic anemometers, at a sampling frequency of 16 Hz. Sediment transport was determined by calculating the mass fluxes from 17 MWAC catchers. In this study, a shrub was defined as a vegetation element with branches until ground and a tree as a vegetation element with a distinctive trunk below a canopy. Behind shrubs wind speed near the soil surface was reduced up to approximately seven times the height of the shrub. The observed reduction in wind speed in the area where wind speed was reduced was 15 per cent on average. At the sides of the shrub, wind speed was increased, by on average 6 per cent. As the area of increase in wind speed is one‐third of the area of decrease in wind speed, the net effect of a shrub is a reduction in wind speed. A similar pattern was visible for the pattern of sediment transport around a shrub. Downwind of a shrub, sediment transport was diminished up to seven times the height of the shrub. Probably most of this material was trapped by the shrub. Trees showed a local increase of wind around the trunk, which is expected to relate to an increase in sediment transport around the trunk. Mass flux measurements of sediment transport were not made, but visual observations in the field substantiate this. Behind the canopy of a tree, a tree acts similarly to a shrub regarding its effects on average wind speed, but as a tree is generally a larger obstacle than a shrub the extent of this effect is larger than for shrubs. Thus, whereas shrubs are more effective than trees regarding their direct effect on soil loss by trapping sand particles near the soil surface, trees are more effective in affecting soil loss indirectly by reducing the wind speed downwind more effectively than shrubs. Therefore, to reduce soil loss in an area, the presence of both trees and shrubs is crucial. Copyright © 2007 John Wiley & Sons, Ltd.     

Interactions between aquatic vegetation,hydraulics and fine sediment: A case study in the Halswell River,New Zealand

This paper contributes a field study of suspended sediment transport through aquatic vegetation. The study was run over a 3 month period which was selected to coincide with scheduled weed cutting activities. This provided the opportunity to obtain data points with no vegetation cover, as well as to investigate the effects of weed cutting on Suspended Sediment Concentrations (SSC), particle size distributions and river hydraulics. Aquatic vegetation cover was quantified through remote sensing with Unmanned Aerial Vehicles and biomass estimated from ground truth sampling. SSC was highly dependent on aquatic vegetation abundance, and the distance upstream that had been cleared of aquatic vegetation. The data indicates that fine sediment was being trapped and stored by aquatic vegetation, then likely remobilised after vegetation removal. Investigation of suspended sediment spatial dynamics illustrated changes in particle size distribution due to preferential settling of coarse particles within aquatic vegetation, for example D50 decreased from 36.08 μm to 15.64 μm after suspended sediment travelled 304.2 m downstream and passed ~3700 kg of aquatic vegetation biomass. Hydraulic resistance in the study reach (parameterized by Manning's n) dropped by over 70% following vegetation cutting. Prior to cutting hydraulic resistance was discharge dependent (likely due to vegetation pronating at higher flows), while post cutting hydraulic resistance was approximately invariant of discharge. Aerial surveying captured interesting changes in aquatic vegetation cover prior to vegetation cutting, where some very dense regions of aquatic vegetation were naturally removed (without any high flow events) leaving behind unvegetated riverbed and fine sediment. The weed cutting boat had a lower impact on SSC than was originally expected, which indicates that it may offer a less damaging solution to aquatic vegetation removal in rivers than some other approaches such as mechanical excavation. This paper contributes valuable field data (which are generally scarce) on the research topic of flow-vegetation-sediment interactions, to supplement laboratory and numerical studies.     

Modelling of sediment supply from torrent catchments in the Western Alps using the sediment contributing area (SCA) approach

The production of coarse sediment in mountain landscapes depends mainly on the type and activity of geomorphic processes and topographic and natural conditions (e.g. vegetation cover) of these catchments. The supply of sediment from these slopes to mountain streams and its subsequent transport lead to sediment connectivity, which describes the integrated coupled state of these systems. Studies from the Northern Calcareous Alps show that the size of the sediment contributing area (SCA), a subset of the drainage area that effectively delivers sediment to the channel network, can be used as a predictor of sediment delivery to mountain streams. The SCA concept is delineated on a digital elevation model (DEM) using a set of rules related to the steepness and length of slopes directly adjacent to the channel network, the gradient of the latter and the vegetation cover. The present study investigates the applicability of this concept to the Western Alps to identify geomorphologically active areas and to estimate mean annual sediment yield (SY) in mainly debris-flow-prone catchments. We use a statistical approach that shows a parameter optimisation and a linear regression of SY on SCA extent. We use a dataset of ~25 years of assessed coarse sediment accumulation in 35 sediment retention basins. In the investigated catchments, sediment transport is governed by several factors, mainly by the extent of vegetation-free areas with a minimum slope of 23° that is coupled to the channel network with a very low gradient of the latter. With our improved framework, we can show that the SCA approach can be applied to catchments that are widely distributed, in a large spatial scale (hectare area) and very heterogeneous in their properties. In general, the investigated catchments show high connectivity, resulting in significant correlations between long-term average yield and the size of the SCA.     

Seasonal drivers and patterns of sediment temperatures in a New England salt marsh

Salt marshes are globally important ecosystems and thus their resilience to climate change holds societal importance. To date, studies addressing salt marsh responses to climate change have focused on sea-level rise and biogeochemical feedbacks with increasing inundation. Less is known about how salt marsh sediment temperatures, which impact physical, biological, and chemical ecosystem processes, will respond to climate change. In this study, we present multi-depth sediment temperature and porewater level data from low-, mid-, and high-marsh sites at a New England salt marsh for a 1-year period and investigate how salt marsh sediment temperatures respond to atmospheric and oceanic forcing. We use spectral analyses to identify the frequencies at which sediment temperatures vary and link the temperature variations to specific forcing mechanisms. We find that all sites across the marsh responded to air temperature with roughly equal amplitude whereas the responses to radiative heating and ocean tides varied spatially. The high-marsh site is more sensitive to radiative heating than the mid- and low-marsh sites. The low-marsh is affected by tidal processes and inundation whereas the high- and mid-marsh sites are not. In addition, we find that the bulk thermal diffusivity of the saturated sediments decreases with distance from the tidal channel. These factors contribute to considerable temporal and spatial variability in sediment temperatures with elevation, distance from the tidal channel, and time of year (season) being most important.     

The influence of neap–spring tidal variation and wave energy on sediment flux in salt marsh tidal creeks

Sediment flux in marsh tidal creeks is commonly used to gauge sediment supply to marshes. We conducted a field investigation of temporal variability in sediment flux in tidal creeks in the accreting tidal marsh at China Camp State Park adjacent to northern San Francisco Bay. Suspended‐sediment concentration (SSC), velocity and depth were measured near the mouths of two tidal creeks during three 6‐ to 10‐week deployments: two in winter and one in summer. Currents, wave properties and SSC were measured in the adjacent shallows. All deployments spanned the largest spring tides of the season. Results show that tidally averaged suspended‐sediment flux (SSF) in the tidal creeks varied from slightly landward to strongly bayward with increasing tidal energy. SSF was negative (bayward) for tidal cycles with maximum water surface elevation above the marsh plain. Export during the largest spring tides dominated the cumulative SSF for each deployment. During ebb tides following the highest tides, velocities exceeded 1 m s^?1 in the narrow tidal creeks, resulting in negative tidally averaged water flux, and mobilizing sediment from the creek banks or bed. Storm surge also produced negative SSF. Tidally averaged SSF was positive in wavy conditions with moderate tides. Spring tide sediment export at the creek mouth was about twice that at a station 130 m further up the tidal creek. The negative tidally averaged water flux near the creek mouth during spring tides indicates that in the lower marsh some of the water flooding directly across the bay–marsh interface drains through the tidal creeks, and suggests that this interface may be a pathway for sediment supply to the lower marsh as well. Copyright © 2018 John Wiley & Sons, Ltd.     

Simulation and consequences of successive anthropogenic activity in the Agua Amarga coastal aquifer (southeast Spain)

Abstract

The Agua Amarga coastal aquifer has been the object of a succession of anthropogenic interventions over the last 90 years: (a) the operation of saltworks from 1925 to 1975; (b) the withdrawal, since 2003, of groundwater from the aquifer along the coast line; and (c) the programme of pouring seawater over the salt marsh, carried out since 2009, to recover the piezometric levels and the soil moisture conditions. For a better understanding of how these past and present human activities have affected the natural groundwater regime, and to validate certain hypotheses concerning the interpretation of experimental data on temperature depth profiles and piezometric and salinity changes, a numerical fluid flow and solute transport model was designed and applied to the period 1925–2010, using SEAWAT. This model reproduces, in a qualitative and quantitative way, the flow and transport processes that operated during this time, as well as the behaviour of the seawater wedge.

Citation Alhama Manteca, I., 2013. Simulation and consequences of successive anthropogenic activity in the Agua Amarga coastal aquifer (southeast Spain). Hydrological Sciences Journal, 58 (5), 1072–1087.

Editor D. Koutsoyiannis     

Modelling the effect of vegetation on channel pattern in bedload rivers

We modify a simple numerical stream‐pattern model to examine the effect of sediment stabilization by roots on the channel pattern of bedload rivers. In the model, vegetation enhances bank resistance to erosion, causing the development of a single channel instead of a rapidly changing, multiple channel (braided) pattern. Net aggradation resulting from a high sediment supply, however, causes frequent avulsions that destroy vegetation locally, leading to the development of a multiple‐channel pattern. A stability diagram representing multiple model runs predicts whether a river will exhibit single or multiple channels, based on plant‐enhanced bank strength, and on the time scale of plant development relative to a time scale for change in unvegetated channels. A second stability diagram predicts the way in which the amplitude and period of a fluctuating imposed sediment load influence whether a single or multiple‐channel pattern develops. Copyright © 2003 John Wiley & Sons, Ltd.     

Effects of discharge,wind, and tide on sedimentation in a recently restored tidal freshwater wetland

Sediment deposition is one of the key mechanisms to counteract the impact of sea level rise in tidal freshwater wetlands (TFWs). However, information about sediment deposition rates in TFWs is limited, especially for those located in the transition zone between the fluvially dominated and tidally dominated sections of a river delta where sedimentation rates are affected by the combined impact of river discharge, wind, and tides. Using a combined hydrodynamic–morphological model, we examined how hydrometeorological boundary conditions control sedimentation rates and patterns in a TFW located in the Rhine–Meuse estuary in the Netherlands. The modelling results show that net sedimentation rate increases with the magnitude of the river discharge, whereas stronger wind increasingly prevents sedimentation. Sediment trapping efficiency decreases for both increasing river discharge and wind magnitude. The impact of wind storms on the trapping efficiency becomes smaller for higher water discharge. The spatial sedimentation patterns are affected by all controls. Our study illustrates the importance of evaluating both the separate and the joint impact of discharge, wind, and tides when estimating sedimentation rates in a TFW affected by these controls. Such insights are relevant to design measures to reactivate the sedimentation process in these areas.     

Investigation of three‐dimensional wind flow behaviour over coastal dune morphology under offshore winds using computational fluid dynamics (CFD) and ultrasonic anemometry

The behaviour of offshore‐directed winds over coastal dune and beach morphology was examined using a combination of modelling (3‐D computational fluid dynamics (CFD)) and field measurement. Both model simulations and field measurements showed reversal of offshore flows at the back beach and creation of an onshore sediment transport potential. The influence of flow reversals on the beach‐dune transport system and foredune growth patterns has previously received little attention. Detailed wind flow measurements were made using an extensive array of mast‐mounted, 3‐D ultrasonic anemometers (50 Hz), arranged parallel to the dominant incident wind direction. Large eddy simulation (LES) of the offshore wind flow over the dune was conducted using the open‐source CFD tool openFOAM. The computational domain included a terrain model obtained by airborne LiDAR and detailed ground DGPS measurements. The computational grid (~22 million cells) included localized mesh refinement near the complex foredune terrain to capture finer details of the dune morphology that might affect wind flows on the adjacent beach. Measured and simulated wind flow are presented and discussed. The CFD simulations offer new insights into the flow mechanics associated with offshore winds and how the terrain steering of wind flow impacts on the geomorphological behaviour of the dune system. Simulation of 3‐D wind flows over complex terrain such as dune systems, presents a valuable new tool for geomorphological research, as it enables new insights into the relationship between the wind field and the underlying topography. The results show that offshore and obliquely offshore winds result in flow reversal and onshore directed winds at distances of up to 20 m from the embryo dune toe. The potential geomorphological significance of the findings are discussed and simple calculations show that incoming offshore and obliquely offshore winds with mean velocities over 13 m s^?1 and 7 m s^?1, respectively, have the potential to create onshore‐directed winds at the back beach with mean velocities above 3.3 m s^?1. These are above the threshold of movement for dry sand and support previous conclusions about the significance of offshore winds in dune and beach budget calculations. Copyright © 2011 John Wiley & Sons, Ltd.     

Multi-tracer assessment of seasonal water source changes in coastal water systems along the southeastern coast of Ivory Coast (West Africa)

ABSTRACT

Proper management of coastal freshwater resources depends on an understanding of processes controlling their chemistry and seasonal flowpaths. A quantitative approach involving the coupling of major solutes and isotopes (δ¹⁸O, δ²H) of 180 samples in end-member mixing analysis (EMMA) was adopted to elucidate seasonal patterns of hydraulic exchanges amongst coastal waters along the Ebrié Lagoon catchment, Ivory Coast. The results show that the Ebrié Lagoon is a hydrologically dynamic system. In the dry season, evaporation and seawater inflow are the dominating processes, while in the wet season, river discharge is the main water source in the lagoon. Regional geology plays a significant role in aquifer recharge patterns. The Quaternary aquifer responds faster to precipitation, while the Mio-Pliocene aquifer is recharged indirectly via floodplain seepages. Salinization of over 90% of wells arises from hydrological exchanges with the Ebrié Lagoon. A diluted seawater effect was recorded in wells during the wet season owing to the relative increase in freshwater inflow.     

The impact of vegetation restoration on erosion-induced sediment yield in the middle Yellow River and management prospect

Serious soil erosion on the Loess Plateau has be-come the focus of world attention.As early as the1950s China has started soil and water conservation work on the Loess Plateau in order to improve the lo-cal eco-environment and mitigate the threat of the coarse sediment in the middle Yellow River to the river channel at downstream.Facts proved that the best alternative is the integrated management of hill slopes and gullies in combination with biological and engineering measures.Biological m…     

Monitoring of the sediment dynamics along a sandy shoreline by means of airborne hyperspectral remote sensing and LIDAR: a case study in Belgium

Airborne hyperspectral data and airborne laserscan or LIDAR data were applied to analyse the sediment transport and the beach morphodynamics along the Belgian shoreline. Between 2000 and 2004, four airborne acquisitions were performed with both types of sensor. The hyperspectral data were classified into seven sand type classes following a supervised classification approach, in which feature selection served to reduce the number of bands in the hyperspectral data. The seven classes allowed us to analyse the spatial dynamics of specific sediment volumes. The technique made it possible to distinguish the sand used for berm replenishment works or for beach nourishments from the sand naturally found on the backshore and the foreshore. Subtracting sequential DTMs (digital terrain models) resulted in height difference maps indicating the erosion and accretion zones. The combination of both data types, hyperspectral data and LIDAR data, provides a powerful tool, suited to analyse the dynamics of sandy shorelines. The technique was demonstrated on three sites along the Belgian shoreline: Koksijde, located on the West Coast and characterized by wide accretional beaches, influenced by dry berm replenishment works and the construction of groins; Zeebrugge, on the Middle Coast, where a beach nourishment was executed one year before the acquisitions started and where the dams of the harbour of Zeebrugge are responsible for the formation of a large accretional beach, and Knokke‐Heist, located on the East Coast and characterized by narrow, locally reflective, beaches, heavily influenced by nourishment activities. The methodology applied allowed retrieval of the main sediment transport directions as well as the amount of sediment transported. It proved to be specifically suited to follow up the redistribution and the re‐sorting of the fill in beach nourishment areas. Copyright © 2007 John Wiley & Sons, Ltd.     

Numerical simulation of the impact of sediment supply and streamflow variations on channel grain sizes and Chinook salmon habitat in mountain drainage networks

Climatically driven changes in streamflow and hillslope sediment supply could potentially alter stream surface grain size distribution patterns and thereby impact habitat for a number of threatened and endangered in‐stream fish species. Relatively little is known about hydrograph (shape, peak flow) influence or the relative importance of chronic and episodic hillslope inputs on channel conditions. To better understand these external drivers, we calculated sediment routing through a gravel‐bedded river network using a one‐dimensional (1D) bedload transport model. We calculated changes in grain sizes and estimated Chinook salmon habitat suitability caused by a dry year and an extreme flood hydrograph, and chronic (diffusive, overland flow) or pulse (landslide, debris flow) hillslope sediment supplies. To obtain accurate channel conditions, a relatively high reference Shields stress, representative of steep mountain streams, was needed. An extreme event flood without any hillslope sediment inputs caused widespread bed coarsening and a decrease in aquatic habitat. Chronic sediment input combined with this hydrograph eliminated any changes in grain size and habitat, although when combined with a dry year flow, caused systematic bed fining. The influence of a given hydrograph therefore highly depends on the hillslope sediment supply. Regardless of the flow hydrograph or sediment pulse timing, grain size distribution or location, pulse sediment inputs did not cause widespread grain size changes despite being 100 times the total chronic input volume. Widespread and continuous hillslope sediment inputs may influence channel grain sizes and aquatic habitat more than a single discrete sediment pulse. Depending on the magnitudes of flow hydrograph and sediment supply alterations, climate change may induce no differences in grain sizes or very dramatic changes with significant consequences for long‐term sustainability. Copyright © 2013 John Wiley & Sons, Ltd.     

Modified MMF (Morgan–Morgan–Finney) model for evaluating effects of crops and vegetation cover on soil erosion

Modifications are made to the revised Morgan–Morgan–Finney erosion prediction model to enable the effects of vegetation cover to be expressed through measurable plant parameters. Given the potential role of vegetation in controlling water pollution by trapping clay particles in the landscape, changes are also made to the way the model deals with sediment deposition and to allow the model to incorporate particle‐size selectivity in the processes of erosion, transport and deposition. Vegetation effects are described in relation to percentage canopy cover, percentage ground cover, plant height, effective hydrological depth, density of plant stems and stem diameter. Deposition is modelled through a particle fall number, which takes account of particle settling velocity, flow velocity, flow depth and slope length. The detachment, transport and deposition of soil particles are simulated separately for clay, silt and sand. Average linear sensitivity analysis shows that the revised model behaves rationally. For bare soil conditions soil loss predictions are most sensitive to changes in rainfall and soil parameters, but with a vegetation cover plant parameters become more important than soil parameters. Tests with the model using field measurements under a range of slope, soil and crop covers from Bedfordshire and Cambridgeshire, UK, give good predictions of mean annual soil loss. Regression analysis of predicted against observed values yields an intercept value close to zero and a line slope close to 1·0, with a coefficient of efficiency of 0·81 over a range of values from zero to 38·6 t ha^?1. Copyright © 2007 John Wiley & Sons, Ltd.     

Quantification of biogeomorphic interactions between small-scale sediment transport and primary vegetation succession on proglacial slopes of the Gepatschferner,Austria

Proglacial slopes provide suitable conditions for observing the co-development of abiotic and biotic systems. The frequency and magnitude of geomorphic processes and plant composition govern this interplay, which is described in the model of biogeomorphic succession. In high mountain environments, this model has only been tested in a limited number of studies. The study aimed to quantify small-scale sediment transport via erosion plots along a plant cover gradient and to investigate the influence of sediment transport on plant communities. We aimed to generate quantitative data to test existing biogeomorphic models. Small-scale biogeomorphic interactions were investigated on 30 test plots of 2 × 3 m size on proglacial slopes of the Gepatschferner (Kaunertal) in the Austrian Alps during the snow-free summer months over three consecutive years. The experimental plots were established on slopes along a plant cover gradient. A detailed vegetation survey was carried out to capture biotic conditions, and specific sediment yield was measured at each plot. Species abundance and composition at each site reflected successional stages. Additional environmental parameters, such as terrain age, geomorphometry, grain size distribution, soil nutrients, and precipitation, were also included in the analyses. We observed two pronounced declines in geomorphic activity on plots with both above 30% and above 75% plant cover. Nonmetric multidimensional scaling showed distinct clusters of vegetation composition that mainly followed a successional gradient. Sites that were affected by high-magnitude geomorphic events showed different environmental conditions and species communities. Quantified process rates and observed species composition support the concept of biogeomorphic succession. The findings help to narrow down a biogeomorphic feedback window.     

A combined field,laboratory and numerical study of the forces applied to,and the potential for removal of,bar top vegetation in a braided river

Vegetation can have an important role in controlling channel planform, through its effects on channel roughness, and root‐reinforcement of bank and bar materials. Along the Platte River in central Nebraska, USA, The Platte River Recovery Implementation Program (PRRIP) has been tasked with managing the planform of the river to benefit endangered species. To investigate the potential use of planned short duration high flow (SDHF) events to manage bar vegetation, this study combined several approaches to determine whether flows of up to 227 m³s^?1 through the central Platte River, could remove cottonwood, Phragmites and reed canarygrass stands of various ages and densities from in‐channel bars. First, fieldwork was carried out to measure the uprooting resistance, and resistance to bending for each species. Second, a set of flume experiments was carried out to measure the forces exerted on the three species of interest under different flow conditions. Finally, a numerical study comparing drag forces (driving) measured in the flume study, with uprooting forces (resisting) measured in the field, was carried out for each species to determine the likelihood of plant removal by SDHF events. Results showed that plants with more than a year of root growth, likely cannot be removed through drag and local scour alone, even at the 100‐year recurrence interval discharge. At most, a few cottonwood seedlings could be removed from bars through drag, scour and undercutting, where rooting depths are still small. The results presented here help us further understand the positive feedbacks that lead to the creation of permanent, vegetated bars rather than mobile braided channels. As such, the findings could help inform management decisions for other braided rivers, and the combined field, flume and modeling techniques used in this study could be applied to other fluvial systems where vegetation and planform dynamics are of interest. Copyright © 2016 John Wiley & Sons, Ltd.