首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 453 毫秒
1.
为了模拟深部圆形洞室三维受力情况下岩爆的发生过程,以具有极强岩爆倾向性的花岗岩作为试验材料,利用自行研制的TRW?3000岩石真三轴电液伺服诱变试验机,对含直径50 mm贯穿圆形孔洞的100 mm×100 mm×100 mm立方体花岗岩试样进行了三向不等压加载试验。试验首先模拟1 000 m深度的初始应力环境,以垂直于洞室轴向的水平方向作为最小主应力方向,通过增加竖直方向应力模拟应力调整过程诱发岩爆情况,并借助三维加载岩样内部结构破坏实时视频监控系统监控洞壁破坏情况。试验结果表明,岩爆过程可以划分为平静阶段、颗粒弹射阶段、岩片剥落和爆裂阶段,洞壁两侧中间部位应力集中系数最高,最先产生破坏,然后沿径向向深部发展,最终形成两个对称型的V型槽。圆形洞室洞壁两侧破坏的3个典型受力节点,符合深部工程中统计得到的无支护圆形巷道的远场应力状态与破坏模式之间的关系,达到了模拟的效果。利用现有的4种岩爆判据进行了分析,判别结果与试验过程中拍摄到的洞壁破坏情况基本一致。洞壁的破坏伴随着声发射计数增加和能量升高,岩爆越剧烈,声发射越活跃。  相似文献   

2.
A mechanical model based upon elasticity theory for the deformation around a pressurized elliptical hole in an homogeneous, isotropic solid has found application in many areas of engineering, rock mechanics, and structural geology. The explicit equations for stress and displacement around such a hole are given. An apl computer program for calculating these stresses and displacements also is presented. These equations and this program should ease future usage of this model by engineers and geologists.  相似文献   

3.
研究各向同性岩体中含一个圆形隧道围岩的附近应力问题。考虑全场的应力变形特征,运用复变函数的罗朗级数展开技术,构造合适的应力函数,结合隧道的边界条件和无穷远的性态,获得了全场应力复势的解析表达式。数值分析发现,应力集中程度最剧烈时,不一定总是发生在孔的附近;应力集中程度最弱时,不一定总是距离孔边较远;当隧道埋深为其半径的5倍以上时,可以作为无限大基体含一个圆形孔洞来处理。  相似文献   

4.
深部岩体处于三维应力场中受开挖扰动影响钻孔、巷道围岩处于明显的真三轴应力状态。钻孔抽采技术是煤矿广泛用于瓦斯治理的重要措施,钻孔周围塑性区是瓦斯流动的优质通道,研究钻孔围岩塑性区特性对于抽采钻孔的优化布置至关重要。为研究钻孔围岩的塑性区特性,基于广义平面应变理论分析围岩应力分布,比较几种常用强度准则(MC、Mises、D-P、MLC、SMP)的适用性和精确性,对比试验结果表明,MLC准则能较好地表征岩石的真三轴强度特性。基于MLC准则推导了围岩塑性区半径公式,分析偏应力、中间主应力、岩石内摩擦角、岩石黏聚力和钻孔半径对增透半径的影响,结果表明,增透半径随着偏应力的增大而增大,随中间主应力的增加先减小后增大,随岩石内摩擦角、岩石黏聚力的增加而逐渐减小,随钻孔半径的增加而线性增大。研究结果可为实际工程中巷道支护、煤层瓦斯抽采等技术的参数设计等提供重要参考。  相似文献   

5.
Summary Currently under study by the Department of Energy are the geologic and hydrologic characteristics of the ash-flow deposits under Yucca mountain at the Nevada test site. Of interest at this site is the potential for disposal of high-level radioactive wastes in the unsaturated zone of the densely welded portions of the tuffs. These studies include the preformance-assessment of barriers and seals for boreholes, ramps, drifts and shafts at the Yucca mountain site. In-situ tests on standard Type II Portland cement and microfine cement as grout materials have been performed on a similar rock type to Yucca Mountain's near Superior Arizona. The tests were performed in a vertical borehole drilled in highly fractured and densely welded tuff (brown unit of Apache Leap) through a series of pressurized grout applications. Packer flow tests prior to and after each grout application measure the effectiveness of the grout application in reducing the permeability of the rock surrounding the borehole. Overall the grout applications have reduced the permeability of the test hole by three orders of magnitude.  相似文献   

6.
王岩生  胡新兆 《江苏地质》2019,43(4):690-695
为探究江苏淮安赵集岩盐矿生产井的涌水原因,通过井筒试压、声波变密度测井、井温测井、冒落带裂隙带厚度推算等方法,分析生产井注采比异常和钻井涌水原因。经测试,井筒压力稳定在70 kg/m3,声波在1 340 m处显示异常,相对声幅为33.6%,固井质量不理想;井温在1 340 m处显示异常,有流体流出,最大冒落带厚度为22.64 m,导水裂隙带厚度约为198 m。分析认为,生产井含盐系顶板垮塌形成冒落带,溶腔内的水顺着裂隙带的导水通道渗透进砂岩地层中是造成矿井涌水的主要原因;部分井段胶结水泥环脱落破碎,致使溶腔内的卤水沿套管外壁的第一界面及第二界面漏失。对已满足服务年限或已开采至矿层顶板的盐井采用潜卤泵采卤法进行生产或实施封孔作业,可以有效防止井内流体渗透;水泥环的破损,可采取增加套管壁厚、提高套管钢级及控制合理内压等措施。  相似文献   

7.
The diametrical compression of a circular disc (Brazilian test) or cylinder with a small eccentric hole is a simple but important test to determine the tensile strength of rocks. This paper studies the failure mechanism of circular disc with an eccentric hole by a 3D numerical model (RFPA3D). A feature of the code RFPA3D is that it can numerically simulate the evolution of cracks in three-dimensional space, as well as the heterogeneity of the rock mass. First, numerically simulated Brazilian tests are compared with experimental results. Special attention is given to the effect of the thickness to radius ratio on the failure modes and the peak stress of specimens. The effects of the compressive strength to tensile strength ratio (C/T), the loading arc angle (2α), and the homogeneity index (m) are also studied in the numerical simulations. Secondly, the failure process of a rock disc with a central hole is studied. The effects of the ratio of the internal hole radius (r) to the radius of the rock disc (R) on the failure mode and the peak stress are investigated. Thirdly, the influence of the vertical and horizontal eccentricity of an internal hole on the initiation and propagation of cracks inside a specimen are simulated. The effect of the radius of the eccentric hole and the homogeneity index (m) are also investigated.  相似文献   

8.
洞室群稳定性是水利水电、铁路公路、国防工事、能源开发与储备工程等领域的研究热点问题。结合新疆某水电站洞室群工程,利用3D-Sigma软件建立了5个洞室群模型(每个模型均含有两个圆形洞室),模拟了洞室开挖过程中围岩应力场变化状况,通过在拱顶、拱底、左右拱脚等区域设立应力监测点,详细分析了前期洞室开挖过程中围岩应力场的变化、后期洞室开挖对前期洞室围岩应力场影响以及随两洞室间距增大应力场的变化规律,得出了洞室群开挖过程中的应力集中分布特征。研究成果对深部洞室群稳定性控制具有一定的参考价值。  相似文献   

9.
单孔岩样水压致裂的数值分析   总被引:2,自引:0,他引:2  
郭保华 《岩土力学》2010,31(6):1965-1970
水压致裂是改变岩体结构的一种天然行为和人为手段。采用F-RFPA2D软件,对水压致裂过程、裂缝扩展形态及注水孔形状和大小、应力条件和岩样强度等影响因素进行了研究。将开始出现声发射的水压称为微裂压力,将声发射急剧增多、裂缝非稳定扩展直至岩样破坏的水压称为破裂压力。岩样尺寸一定时,微裂压力和破裂压力随内孔面积增加而降低,方形孔岩样的微裂压力和破裂压力均小于同面积的圆形孔。微裂压力和破裂压力随围压或岩样强度增加而增加,且其差值随岩样强度增加而增加,理论破裂压力与模拟值趋势基本一致。方形孔的宏观裂纹起裂位置多在角点附近,而圆形孔比较随机。无围压时,宏观裂纹的延伸方向随机;有围压时,宏观裂纹扩展方向大致与主应力方向一致,且沿较大主应力方向的宏观裂纹扩展至岩样破坏,较小主应力方向宏观裂纹不完全发育。研究结果对水压致裂试验和工程实践有一定参考意义。  相似文献   

10.
In many geotechnical systems, such as reinforced slopes and embankments, soil-structure interfaces are often unsaturated. Shear behaviour of unsaturated interfaces is strongly dependent on their matric suctions, as revealed by the results of extensive laboratory tests. So far, constitutive models for unsaturated interfaces are very limited in the literature. This paper reports a new bounding surface model for saturated and unsaturated interfaces. New formulations were developed to incorporate suction effects on the flow rule and plastic modulus. To examine the capability of the proposed model, it was applied to simulate suction- and stress-controlled direct shear tests on unsaturated soil–cement, soil–steel and soil–geotextile interfaces. Measured and computed results are well matched, demonstrating that the proposed model can well capture key features of the shear behaviour of unsaturated interfaces, including suction-dependent dilatancy, stress–strain relation and peak and critical state shear strengths.  相似文献   

11.
Hydromechanical Behaviour of Rock-Bentonite Interfaces Under Compression   总被引:1,自引:0,他引:1  
Summary Interfaces between geomaterials may be critical for the long term confinement of the engineered barriers of nuclear waste disposals, particularly if there is water flow. Hydromechanical compression tests have been performed on rock-bentonite interfaces representing the contact between a host rock (toarcian argillite) and an engineered barrier within a nuclear waste repository. The results show that there is no major influence of the bentonite fraction or the nature of the additive as long as the additive is inert (sand or crushed rock): all the interfaces are closed for low values of normal stress (about 4 MPa). On the other hand, the hydromechanical behaviour of the interfaces changes when a high fraction of cement is used. Moreover, it has been shown that bentonite is very sensitive to hydraulic erosion, producing flow channels within the interface zone. A numerical study confirms the importance of erosion for the hydromechanical behaviour of the interface. Authors’ address: Olivier Buzzi, Laboratoire Sols, Solides, Structures, Université Joseph Fourier, BP 53, 38041 Grenoble, Cedex 9, France  相似文献   

12.
The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.  相似文献   

13.
Fractures developed around high pressurized gas or air storage tunnels can progressively extend to the ground surface, eventually leading to an uplift failure. A tool reasonably reproducing the failure patterns is necessary for stability assessment. In this study, a numerical method based on the element-free Galerkin (EFG) method with a cohesive crack model is developed to simulate fracture propagation patterns in the rock mass around a tunnel under high internal pressure. A series of physical model tests was also conducted to validate the reliability of the developed method. A qualitative agreement between physical model tests and numerical results can be obtained. The in situ stress ratio, k, has a strong influence on both the position of crack initiation and the propagation direction. The numerical analyses were extended to full-scale problems. Numerical tests were performed to investigate the prime influencing factors on the failure patterns of a high pressurized gas circular tunnel with varying parameters. The results suggest that initial in situ stress conditions with a high k (larger than 1) is favorable for construction of pressurized gas or air storage tunnels.  相似文献   

14.
利用新型数字激光动态焦散线试验系统,采用有机玻璃板试件进行模型试验,研究了含预制不同形状空孔对岩石定向断裂控制爆破的影响规律。试验结果表明:在定向断裂控制爆破中,设置菱形空孔更有利于实现精细化定向断裂控制爆破,可有效保证巷道周边眼爆破的成型效果;对比含3种不同形状空孔试件爆生主裂纹扩展速度可知,含菱形空孔的扩展速度最大,含圆形空孔的次之,含带刻槽圆形空孔的最低;含圆形空孔试件爆生主裂纹端部动态应力强度因子总体比含菱形和切槽圆形空孔试件爆生主裂纹端部动态应力强度因子大;主裂纹扩展中后期阶段,含菱形空孔试件爆生主裂纹端部动态应力强度因子相对较小。  相似文献   

15.
王学滨  伍小林  潘一山 《岩土力学》2012,33(8):2395-2402
为了避免均质和非均质模型不能较好地模拟围岩的层裂或板裂化现象,将岩石视为等效连续介质,即颗粒体材料。颗粒被视为弹性材料,而颗粒之间的界面破坏后被视为摩尔-库仑材料。颗粒和界面均被离散为正方形单元。采用FLAC研究了不同侧压系数时圆形巷道围岩中的剪切应变增量、最小、最大主应力等的分布规律。研究发现,颗粒体材料模型在压应力作用下诱发出的拉应力值接近于在模型边界上所施加的最大压应力,而最大压应力是所施加的最大压应力的数倍。这些结果意味着均质和非均质模型的计算结果是偏于不安全的。另外,最小主应力和剪切应变增量的等值线图均显示,这些量的高值区的距离大致相等,这与V形岩爆坑内的板裂化现象类似。围岩层裂现象的原因是环向的高压应力和径向的高拉应力的共同作用的结果。  相似文献   

16.
A closed-form analysis for elastic—plastic response of a circular hole in an infinite Mohr—Coulomb medium under axisymmetric loading shows the effect of repeated loading on the stress and displacement fields around the hole. Examples show how repeat-load closure increment is affected by working load, internal pressure, material compressive strength and internal friction. The solution is used to predict results of a laboratory test performed on a rock simulant specimen that contained a reinforced hole. Analytical and laboratory results are similar: at small closures (a few per cent, but well into the plastic response range), the closure increment from an unload—reload cycle is small compared with the initial closure. Closure increments for each of several cycles are comparable and cumulative.  相似文献   

17.
18.
2006年4月19日,山东珑山实业有限公司1113机采工作面发生井下突水事故,突水量300m^3/h。通过水质化验、奥灰孔水位观测等资料分析,得出了突水水源为奥陶系岩溶水,突水的原因是断层、矿山压力及高水压三大因素综合作用波及到了底板奥陶纪石灰岩含水层的结论。在注浆治理中,本着截流封源的思路,在井下先后施工了两个注水钻孔。在注1号钻孔失败后,及时调整了方案,自1111机道7号点,沿方位260°3′44″掘专门堵水平巷130m,重新布置了注2号钻孔,修改了终孔落脚点,结果注2号孔准确命中目标。通过单液水泥注浆技术注入70.3t水泥,浆液的水灰比为:2:1~1.5:1,工作面水量最后稳定在20.16m^3/h,从而顺利完成了注浆堵水任务,为今后井下打钻注浆堵水提供了有益的借鉴。  相似文献   

19.
The method of stress characteristics has been used for computing the ultimate bearing capacity of strip and circular footings placed on rock mass. The modified Hoek‐and‐Brown failure criterion has been used. Both smooth and rough footing‐rock interfaces have been modeled. The bearing capacity has been expressed in terms of nondimensional factors Nσ0 and Nσ, corresponding to rock mass with (1) γ = 0 and (2) γ ≠ 0, respectively. The numerical results have been presented as a function of different input parameters needed to define the Hoek‐and‐Brown criterion. Slip line patterns and the pressure distribution along the footing base have also been examined. The results are found to compare generally well with the reported solutions.  相似文献   

20.
This paper studies the joint effect of seepage force and axial stress on the stress and displacement of circular tunnel. The circular tunnel is simplified as an axisymmetric model and the seepage field is simplified as volumetric force in the stress field. The excavation cross-section of surrounding rock is assumed as a plane as well, and an axial stress perpendicular to the plane is further introduced. Nonlinear solutions for the stress and displacement of circular tunnel are deduced considering the joint effect of axial stress and seepage force, based on the generalized Hoek-Brown failure criterion and the non-associated flow rule in elastic-brittle-plastic rock mass. Numerical simulations are also employed to analyze the distribution of stress field and displacement field in plastic zone of a circular tunnel under the joint effect of axial stress and seepage force. The calculated results show that the displacement in plastic zone increases significantly with the gradient increment of the seepage pressure, compared with the situation without seepage force. The radius and stress of surrounding rock in plastic zone increase when axial stress is the intermediate principal stress, while the radius and stress have less change when axial stress is the major or minor principal stress. It can be concluded that the seepage force has negative effects on the stability of circular tunnel, and the axial stress significantly influences the stress and displacement of the circular tunnel, especially in water-rich areas. Therefore, it is necessary to consider the joint effects of axial stress and seepage force to ensure the stability of circular tunnel in water-rich area.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号