黑色页岩铁同位素标准物质的研制

本文选择宜昌三峡地区九龙湾剖面采集的黑色页岩作为黑色页岩Fe同位素备选标准物质, 命名为CAGS-BS。使用单因素方差分析法对CAGS-BS进行均匀性检验; 使用t检验对其在24个月中四次分析的数据进行长期稳定性的检验, 结果显示均匀性和稳定性良好, 满足标准物质的要求。黑色页岩Fe同位素标准物质采用多家实验室协作定值的方法确定特征量值。协作定值的单位包括: 中国地质科学院地质研究所, 中国科学技术大学, 中国地质大学(北京), 天津大学和中国科学院广州地球化学研究所。剔除了可疑值之后的数据符合正态分布, 可以采用算术平均法进行标准物质的定值。标准物质不确定度由协作测定的不确定度分量(uchar)、批内瓶间差异引起的不均匀性不确定度分量(ubb’)和实验室保存引起的长期不稳定性不确定度分量(ults)共同确定, 总不确定度为扩展不确定度, 包含因子(k)等于2。得到CAGS-BS的特征值及不确定度为: δ56FeIRMM-014/‰ = 0.10 ± 0.04。该标准物质可用于黑色页岩样品的化学流程评价和验证、质谱仪的校正及整个过程的分析质量控制。     

钛同位素标准溶液研制

钛同位素组成可用于地球化学和宇宙化学研究中,但目前国内外缺乏钛同位素标准物质.为了满足地质样品钛同位素分析的需要,本文研制了钛同位素标准溶液,报道了钛同位素标准溶液的研制过程和定值结果,包括标准溶液的选择、均匀性和稳定性检验、定值分析及测定数据的统计性检验等.通过初步测定,确定美国Alfa公司生产的Ti单元素溶液作为备选Ti同位素标准溶液.将备选标准溶液分装成150瓶,随机抽取15瓶进行均匀性检验,测试结果的F值均小于临界值,表明备选标准溶液的Ti同位素组成均匀.通过30个月的稳定性检验,标准溶液的特征量值变化在不确定度范围内.采用独家和多家实验室相结合的方法进行定值,标准溶液的特征量值及不确定度推荐为:δ50Ti=-2.23‰±0.14‰,δ49Ti=-1.67‰±0.09‰,δ48Ti=-1.13‰±0.06‰,δ47Ti=-0.57‰±0.05‰.研制的标准溶液可用于钛同位素分析时校正仪器和验证质谱分析过程,有利于不同实验室的测试数据之间的对比和应用.     

河流沉积物多环芳烃标准样品的制备与定值

多环芳烃环境标准样品是保证多环芳烃环境监测和污染调查数据可靠性以及不同实验室间分析数据可比性必不可少的计量工具。美国NIST、欧盟IRMM、英国LGC等研究机构已有沉积物多环芳烃环境标准样品,但浓度水平大部分集中在mg/kg浓度水平,与我国当前的污染水平存在一定差距,难以满足痕量分析(μg/kg)质量保证与质量控制的要求。而我国受天然基体标准样品制备技术和定值分析技术的制约,尚没有研制沉积物多环芳烃环境标准样品。本文研制了适合我国多环芳烃环境监测和科学研究需要的河流沉积物标准样品。沉积物样品采集自松花江哈尔滨段流域,经过自然阴干、研磨、筛分、混匀和灭菌等加工处理,分层随机抽取15瓶样品对16种多环芳烃进行均匀性研究,结果表明样品均匀性良好。在30℃避光保存条件下,采用线性模型进行稳定性研究,标准样品在16个月稳定性检验期间未发现不稳定变化趋势。11家实验室对该河流沉积物标准样品采用气相色谱-质谱法和液相色谱法进行联合定值,经统计分析处理评定出14种多环芳烃的标准值和不确定度,并给出2种多环芳烃的参考值,特性量值在6.9~158 μg/kg之间,不确定度在1.5~25 μg/kg之间,可以满足多环芳烃痕量分析质量保证与质量控制的要求。该标准样品被批准为国家标准样品,填补了国内此类标准样品和标准物质空白,已成功应用于土壤和沉积物样品中多环芳烃的监测,可为进一步开展有机污染物环境基体标准样品研制提供参考和借鉴。     

矿区污染场地土壤重金属元素分析标准样品的研制

我国工矿开采区及周边地区已出现土壤重污染区和高风险区,这些区域是土壤环境监测的重要区域,但在实际环境监测中缺乏基体和污染特征相一致的污染场地土壤重金属元素分析标准样品。本文针对土壤重污染区和高风险区污染特征及实际环境监测需求,采集我国南方红壤区采矿企业周边的典型农田土壤,按照GB/T 15000导则和相关标准研制了污染场地土壤重金属元素分析标准样品。采集的土壤样品经低温烘干、研磨、筛分、混匀和辐照灭菌等加工处理,分层随机抽取20瓶子样进行均匀性研究,结果表明由均匀性引起的相对不确定度在0.27%~2.1%之间,样品均匀性良好,最小取样量为0.20 g。稳定性研究采用X射线荧光光谱法,数据评价采用趋势分析法,室温避光保存条件下,在12个月稳定性跟踪考察期间样品未观察到不稳定变化趋势,由稳定性性引起的相对不确定度在0.06%~2.1%之间。经13家有资质的实验室选用两种以上不同原理的高准确度方法对标准样品中21种元素(Ag、Al、As、Ba、Be、Cd、Co、Cr、Cu、Fe、Hg、Mn、Mo、Ni、Pb、Sb、Se、Ti、Tl、V、Zn)联合定值,总不确定度由定值不确定度(u~(char))、瓶间均匀性不确定度(u~(bb))和长期稳定性不确定度(u~(lts))合成,除Se外,其余元素的相对扩展不确定度均小于8%,表明标准样品定值准确,不确定度水平满足日常环境检测对土壤标准样品的要求。该标准样品被批准为国家实物标准样品(GSB 07-3272—2015),可用于分析方法验证或南方红壤区采矿及洗选企业周边土壤样品中重金属监测的质量控制。     

铌钽精矿标准物质研制

铌钽精矿标准物质在监控选冶样品分析的过程起到重要作用,在选厂及冶金系统有很大的需求,国内外的文献检索均未发现铌钽精矿标准物质的报道;而铌钽矿物的性质决定了铌钽精矿的粉碎粒度及均匀性对铌钽精矿标准物质的研制提出了更高的要求。本文阐述了4个铌钽精矿标准物质的研制过程,铌钽精矿采集于宜春及尼日利亚铌钽选厂,样品经气流粉碎和高铝球磨两次细碎及机械混匀后,随机抽取包装好的样品进行均匀性和稳定性检验及定值。采用电感耦合等离子体发射光谱法与质谱法(ICP-OES/MS)进行均匀性和稳定性检验,结果表明样品的均匀性和稳定性良好。采用多个实验室协同测试的定值方式,利用不同原理的分析方法对此样品的铌钽等12个元素进行定值,给出了各定值元素的认定值和不确定度。4个铌钽精矿标准物质Ta(Nb)_2O_5的含量为9. 89%、20. 55%、40. 79%、53. 69%,形成一个从粗精矿到精矿较为完整的含量体系,可以满足选冶试验各阶段流程样品分析对标准物质的需求。     

水中挥发性有机物分析的影响因素和常见问题解决办法

应用吹扫捕集-气相色谱-质谱法测定水中挥发性有机物,多种因素影响着定量分析的准确性,包括样品瓶的清洗及标准配制、样品和标准溶液的保存、载气气源的纯度、仪器状态检查及参数选择、分离度及积分方式。本文提出在分析过程中样品瓶必须清洗干净,以免污染样品;样品和标准溶液的保存时间过长会降低目标物的回收率;载气和吹扫气会带入杂质;分离度的大小将影响峰高和峰面积测量的准确度。针对分析中氯乙烯的回收、二氯甲烷的交叉污染、浑浊样品的处理等常见问题提供了解决方案,推荐采用选择扫描方式进行分析,并根据样品基体的情况来选择定量离子,将分析的初始温度降至40℃以下并保持2~3 min,以保证氯乙烯的回收率;实验室保持良好的通风环境,避免二氯甲烷交叉污染;色谱柱的最高温度升至220℃以上并保持2~3 min,可以排除萘及分子烷烃的干扰,保证分析的连续性;对于浑浊样品,推荐在野外取样时进行在线过滤或直接采用静态顶空方式进行测定。     

松花江哈尔滨段水系沉积物中无机元素环境标准样品的研制

介绍了松花江哈尔滨段水系沉积物环境标准样品的研制方法,对其中21个无机元素进行定值。采集的水系沉积物样品经自然阴干、研磨、筛分、混匀、装瓶和灭菌等加工处理后,分层随机抽取18瓶样品,在0.25 g样品取样量条件下,以铜、铅、锌、砷、汞、铁和铝为代表元素进行均匀性研究,结果表明样品均匀性良好。在室温避光保存条件下,以铜、铅、锌、砷和汞为代表元素,采用线性模型进行稳定性研究,在15个月研制期间样品未观察到不稳定性。由11家协作实验室对水系沉积物标准样品中的21个无机元素进行定值研究,经统计检验分析评定出20个元素的标准值和不确定度,1个元素给出参考值。研制成的标准样品已应用于土壤或水系沉积物样品中无机元素的监测。     

石英岩化学成分分析标准物质研制

目前巴西、英国、日本、南非等国研制有一些石英岩类标准物质,SiO₂含量均在96%以上,含量范围较窄,定值元素较少。我国尚无石英岩类的标准物质,无法满足石英岩勘查和实际应用的需要。本文研制了3个石英岩化学成分分析标准物质,样品采自我国具有代表性的安徽省凤阳县大庙镇老青山、青海省大通县景阳镇和湖北省蕲春县灵虬山三个石英矿区,利用流化床式气流粉碎机将样品细碎至-45 μm,解决了纯度较高的石英岩粉碎加工易受污染的难题。因石英岩样品难以压制成型,均匀性检验未采用压片制样X射线荧光光谱法,而是采用以电感耦合等离子体发射光谱法和电感耦合等离子体质谱法为主的检验方法。结果表明,方差检验的F值均小于临界值,证明其均匀性符合要求。为期两年的长期稳定性8次检验中未发现统计学意义上的明显变化,在颠震和极端温度条件下所检验的短期稳定性良好。经我国十家实验室使用多种分析方法联合定值,同时探索采用类似元素比较法获取未进行均匀性和稳定性检验的成分的相应不确定度分量,给出了36个成分的认定值(或参考值)和相应的不确定度。3个标准物质现已被批准为国家一级标准物质(编号GBW 07835、GBW 07836、GBW 07837),其主要成分SiO₂的含量相应为92.93%、95.97%、99.18%,呈梯度分布。此系列标准物质具有样品粒度均匀、粒度分布范围窄(D₂₅～D₇₅在4～16 μm之间),定值元素种类多,SiO₂含量分布广泛的特点,可以满足石英岩样品化学成分分析过程中监控的需要。     

地下水中砷形态标准物质研制

砷元素的不同形态对人体有不同的毒性,无机砷的毒性最大,有机砷毒性较小,准确测定水体中尤其是地下水中砷形态的含量对于人体健康和环境保护有重要意义。但目前国内外尚缺乏地下水中砷形态的标准物质。文章研制了5个地下水砷形态标准物质,候选物样品采自山西和内蒙古高砷地区,在样品的采集和制备过程中使用冷冻干燥法和加保护剂两种方法保证砷形态稳定,定值参数为砷全量、As(Ⅲ)、As(Ⅴ),定值方法采用氢化物发生-原子荧光光谱法、电感耦合等离子体光谱法、电感耦合等离子体质谱法、高效液相色谱-电感耦合等离子体质谱法。经检验,制备的砷形态标准物质具有良好的均匀性和稳定性。该系列标准物质研制中首次应用冷冻干燥技术,样品保存问题得到了很好的解决,采用多家实验室协作定值,测试方法准确、可靠,标准值和不确定度合理,填补了国内外砷形态标准物质研制的空白。     

气相色谱—串联质谱技术检测水中安眠酮残留量

本实验建立水中安眠酮残留量的气相色谱-串联质谱联用(GC-MS/MS)分析方法。方法样品采用乙酸乙酯提取,浓缩后甲醇定容待测。采用GC-MS/MS分析时,安眠酮在15 mins内流出。对采集的水样进行两种浓度的加标质控,回收率均在70%以上,相对标准偏差(RSD)在3.0%以内。在0.05~1.00 mg/L的浓度范围内呈线性关系,相关系数大于0.999。检出限为0.50μg/L。该方法可准确用于环境水样中安眠酮残留的定量分析,灵敏度、精密度和准确度均满足残留检测的分析要求。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

滇东南花岗岩与锡、银、铜、铅、锌多金属矿床的成因关系

滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Bellechester,Minnesota, USA,lagoon collapses

Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×10⁶ 1 of partially treated effluent and about 600 m³ of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.