Interpreting nested storm event suspended sediment-discharge hysteresis relationships at large catchment scales

Reducing soil erosion and sediment delivery into rivers is a major aim for land management in New Zealand. Therefore, it is important to identify areas of sediment generation and their relationship to in-stream suspended sediment concentrations and water quality attributes. It is possible to infer and assess sediment sources and dynamics using storm event suspended sediment concentration-discharge hysteresis shape and loop direction. Research in small catchments has achieved some success; however, research in larger (>10³ km²) catchments has shown the inherent difficulty of interpreting hysteresis patterns at larger scales. In this paper, we use a nested, long-term suspended sediment monitoring program across a large catchment (3,903 km²: Manawatū in New Zealand) to address these challenges. We evaluate the hysteresis patterns of five major tributaries (subcatchment areas 329–1,298 km²) of the Manawatū River together with the hysteresis patterns at the gauged catchment outlet. Hysteresis patterns of the Manawatū subcatchments can be characterized as predominantly clockwise, that is, high hysteresis index (HI) value. Larger storms (discharge >2 × 10⁷ m³) increase the likelihood of clockwise hysteresis directions, whereas smaller storms (discharge <2 × 10⁷ m³) are more likely to be anticlockwise. The link between suspended sediment concentration-discharge hysteresis and subcatchment sediment sources becomes increasingly attenuated within the larger subcatchments. High antecedent discharge negatively correlates to HI values, suggesting conditions immediately before the storm have an influence on whether the catchment is “primed” or “exhausted” with available sediment. The different storm categories indicate that within this catchment, whereas hysteresis patterns vary due to the spatial origin of discharge and sediment to some extent, storm magnitude has a stronger impact on hysteresis dynamics than spatial origin.     

A preliminary assessment of the spatial sources of contemporary suspended sediment in the Ohio River basin,United States,using water quality data from the NASQAN programme in a source tracing procedure

Reliable information on catchment scale suspended sediment sources is required to inform the design of management strategies for helping abate the numerous environmental issues associated with enhanced sediment mobilization and off‐site loadings. Since sediment fingerprinting techniques avoid many of the logistical constraints associated with using more traditional indirect measurement methods at catchment scale, such approaches have been increasingly reported in the international literature and typically use data sets collected specifically for sediment source apportionment purposes. There remains scope for investigating the potential for using geochemical data sets assembled by routine monitoring programmes to fingerprint sediment provenance. In the United States, routine water quality samples are collected as part of the US Geological Survey's revised National Stream Quality Accounting Network programme. Accordingly, the geochemistry data generated from these samples over a 10‐year period (1996–2006) were used as the basis for a fingerprinting exercise to assess the key tributary sub‐catchment spatial sources of contemporary suspended sediment transported by the Ohio River. Uncertainty associated with the spatial source estimates was quantified using a Monte Carlo approach in conjunction with mass balance modelling. Relative frequency weighted means were used as an alternative way of summarizing the spatial source contributions, thereby avoiding the need to use confidence limits. The results should be interpreted in the context of the routine, but infrequent nature, of the suspended sediment samples used to assemble geochemistry as a basis for the sourcing exercise. Nonetheless, the study demonstrates how routine monitoring samples can be used to provide some preliminary information on sediment provenance in large drainage basins. Copyright © 2011 John Wiley & Sons, Ltd.     

Temporal variability of suspended sediment sources in an alpine catchment combining river/rainfall monitoring and sediment fingerprinting

Influence of the rainfall regime on erosion and transfer of suspended sediment in a 905‐km² mountainous catchment of the southern French Alps was investigated by combining sediment monitoring, rainfall data, and sediment fingerprinting (based on geochemistry and radionuclide concentrations). Suspended sediment yields were monitored between October 2007 and December 2009 in four subcatchments (22–713 km²). Automatic sediment sampling was triggered during floods to trace the sediment origin in the catchment. Sediment exports at the river catchment outlet (330 ± 100 t km^‐2 yr^‐1) were mainly driven (80%) by widespread rainfall events (long duration, low intensities). In contrast, heavy, local and short duration storms, generated high peak discharges and suspended sediment concentrations in small upstream torrents. However, these upstream floods had generally not the capacity to transfer the sediment down to the catchment outlet and the bulk of this fine sediment deposited along downstream sections of the river. This study also confirmed the important contribution of black marls (up to 70%) to sediment transported in rivers, although this substrate only occupies c. 10% of the total catchment surface. Sediment exports generated by local convective storms varied significantly at both intra‐ and inter‐flood scales, because of spatial heterogeneity of rainfall. However, black marls/marly limestones contribution remained systematically high. In contrast, widespread flood events that generate the bulk of annual sediment supply at the outlet were characterized by a more stable lithologic composition and by a larger contribution of limestones/marls, Quaternary deposits and conglomerates, which corroborates the results of a previous sediment fingerprinting study conducted on riverbed sediment. Copyright © 2012 John Wiley & Sons, Ltd.     

Magnitude and variation in the contribution of bank erosion to the suspended sediment load of the River Severn,UK

The wide range of studies describing the role of bank erosion in fluvial sediment supply have mostly lumped amounts of bank erosion into coarse temporal units, such as years. This paper investigates sediment yields from individual bank erosion events within the upper River Severn, UK (basin area 380 km²). Manual erosion pins and photo-electronic erosion pins were used to estimate bank erosion, and turbidity meters were used to determine suspended sediment transport. At the annual time-scale, the silt-clay fraction of bank-derived sediment accounted for an equivalent of 17 per cent of the suspended load, increasing to an average of 38 per cent at the monthly timescale, and then to an average of 64 per cent at the event timescale. This research highlighted that for an upland catchment, bank erosion was an important supply of suspended sediment, and that for some flood events bank erosion can supply more sediment than is transported. © 1997 John Wiley & Sons, Ltd.     

Composite suspended sediment particles in river systems: their incidence,dynamics and physical characteristics

Most of the existing data on the effective particle size characteristics of fluvial suspended sediment derive from instantaneous sampling methods that may not be representative of the overall suspended sediment loads. This presents difficulties when there is a need to incorporate effective particle size data into numerical models of floodplain sedimentation and sediment‐associated contaminant transfer. We have used a field‐based water elutriation apparatus (WEA) to assemble a large (36 flood) database on the time‐integrated nature of the effective and absolute particle size characteristics of suspended sediment in four subcatchments of the River Exe basin of southwest England. These catchments encompass a wide range of terrains and fluvial environments that are broadly representative of much of the UK and temperate, low relief northwest Europe. The WEA provides important data on the physical characteristics of composite particles that are not attainable using other methods. This dataset has allowed, for the first time, detailed interbasin comparisons of the time‐integrated particle size characteristics of suspended sediment and reliable estimates of the contribution of five effective size classes to the mean annual suspended sediment load of the study catchments. The suspended sediment load of each river is dominated by composite rather than primary particles, with, for example, almost 60% (by mass) of the sediment load of the River Exe at Thorverton transported as composite particles > 16 µm in size. All the effective size classes contain significant clay components. A key outcome of this study is the recognition that each catchment has a distinctive time‐integrated effective particle size signature. In addition, the time‐integrated effective particle size characteristics of the suspended loads in each of the catchments display much greater spatial variability than the equivalent absolute particle size distributions. This indicates that the processes producing composite particles vary significantly between these catchments, and this has important implications for our understanding of the dynamics of suspended sediment properties. Copyright © 2007 John Wiley & Sons, Ltd.     

The effects of sample scheduling and sample numbers on estimates of the annual fluxes of suspended sediment in fluvial systems

Since the 1970s, there has been both continuing and growing interest in developing accurate estimates of the annual fluvial transport (fluxes and loads) of suspended sediment and sediment‐associated chemical constituents. This study provides an evaluation of the effects of manual sample numbers (from 4 to 12 year^?1) and sample scheduling (random‐based, calendar‐based and hydrology‐based) on the precision, bias and accuracy of annual suspended sediment flux estimates. The evaluation is based on data from selected US Geological Survey daily suspended sediment stations in the USA and covers basins ranging in area from just over 900 km² to nearly 2 million km² and annual suspended sediment fluxes ranging from about 4 Kt year^?1 to about 200 Mt year^?1. The results appear to indicate that there is a scale effect for random‐based and calendar‐based sampling schemes, with larger sample numbers required as basin size decreases. All the sampling schemes evaluated display some level of positive (overestimates) or negative (underestimates) bias. The study further indicates that hydrology‐based sampling schemes are likely to generate the most accurate annual suspended sediment flux estimates with the fewest number of samples, regardless of basin size. This type of scheme seems most appropriate when the determination of suspended sediment concentrations, sediment‐associated chemical concentrations, annual suspended sediment and annual suspended sediment‐associated chemical fluxes only represent a few of the parameters of interest in multidisciplinary, multiparameter monitoring programmes. The results are just as applicable to the calibration of autosamplers/suspended sediment surrogates currently used to measure/estimate suspended sediment concentrations and ultimately, annual suspended sediment fluxes, because manual samples are required to adjust the sample data/measurements generated by these techniques so that they provide depth‐integrated and cross‐sectionally representative data. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.     

An evaluation of sediment rating curves for estimating suspended sediment concentrations for subsequent flux calculations

In the absence of actual suspended sediment concentration (SSC) measurements, hydrologists have used sediment rating (sediment transport) curves to estimate (predict) SSCs for subsequent flux calculations. Various evaluations of the sediment rating‐curve method were made using data from long‐term, daily sediment‐measuring sites within large (>1 000 000 km²), medium (<1 000 000 to >1000 km²), and small (<1000 km²) river basins in the USA and Europe relative to the estimation of suspended sediment fluxes. The evaluations address such issues as the accuracy of flux estimations for various levels of temporal resolution as well as the impact of sampling frequency on the magnitude of flux estimation errors. The sediment rating‐curve method tends to underpredict high, and overpredict low SSCs. As such, the range of errors associated with concomitant flux estimates for relatively short time‐frames (e.g. daily, weekly) are likely to be substantially larger than those associated with longer time‐frames (e.g. quarterly, annually) because the over‐ and underpredictions do not have sufficient time to balance each other. Hence, when error limits must be kept under ±20%, temporal resolution probably should be limited to quarterly or greater. The evaluations indicate that over periods of 20 or more years, errors of <1% can be achieved using a single sediment rating curve based on data spanning the entire period. However, somewhat better estimates for the entire period, and markedly better annual estimates within the period, can be obtained if individual annual sediment rating curves are used instead. Relatively accurate (errors <±20%) annual suspended sediment fluxes can be obtained from hydrologically based monthly measurements/samples. For 5‐year periods or longer, similar results can be obtained from measurements/samples collected once every 2 months. In either case, hydrologically based sampling, as opposed to calendar‐based sampling is likely to limit the magnitude of flux estimation errors. Published in 2003 John Wiley & Sons, Ltd.     

Flood‐based analysis of high‐magnitude sediment transport using a non‐parametric method

Upland erosion and the resulting reservoir siltation is a serious issue in the Isábena catchment (445 km² Central Spanish Pyrenees). During a three‐month period, water and sediment fluxes have been monitored at the catchment outlet (Capella), two adjacent subcatchments (Villacarli, 41 km²; Cabecera, 145 km²) and the elementary badland catchment Torrelaribera (8 ha). This paper presents the results of the monitoring, a method for the calculation of a sedigraph from intermittent measurements and the derived sediment yields at the monitored locations. The observed suspended sediment concentrations (SSCs) demonstrate the role of badlands as sediment sources: SSCs of up to 280 g l^?1 were encountered for Villacarli, which includes large badland areas. SSCs at the Cabecera catchment, with great areas of woodland, barely exceeded 30 g l^?1. SSCs directly at the sediment source (Torrelaribera) were comparable to those at Villacarli, suggesting a close connection within this subcatchment. At Capella, SSCs of up to 99 g l^?1 were observed. For all sites, SSC displayed only a loose correlation with discharge, inhibiting the application of a simple sediment rating curve. Instead, ancillary variables acting as driving forces or proxies for the processes (rainfall energy, cumulative discharge, rising/falling limb data) were included in a quantile regression forest model to explain the variability in SSC. The variables with most predictive power vary between the sites, suggesting the predominance of different processes. The subsequent flood‐based calculation of sediment yields attests high specific sediment yields for Torrelaribera and Villacarli (6277 and 1971 t km^?2) and medium to high yields for Cabecera and Capella (139 and 410 t km^?2) during the observation period. In all catchments, most of the sediment was exported during intense storms of late summer. Later flood events yield successively less sediment. Relating upland sediment production to yield at the outlet suggests considerable effects of sediment storage within the river channel. Copyright © 2008 John Wiley & Sons, Ltd.     

Interannual variation of suspended sediment load and sediment yield in an alpine catchment

Abstract

The results are described of 16 years operation of a measuring station for the automatic recording of water discharge, bed load and suspended sediment transport in the Rio Cordon catchment, a small alpine basin (5 km²) located in northeastern Italy. Hillslope erosion processes were investigated by surveying individual sediment sources repeatedly. Annual and seasonal variations of suspended sediment load during the period 1986–2001 are analysed along with their contribution to the total sediment yield. The results show that suspended load accounted for 76% of total load and that most of the suspended sediment transport occurred during two flood events: an extreme summer flash flood in September 1994 (27% of the 16-years total suspended load) and a snowmelt-induced event in May 2001 accompanied by a mud flow which fed the stream with sediments. The role of active sediment source areas is discussed in relation to the changes in flood peak—suspended load trends which became apparent after both the 1994 and the 2001 events.     

Modelling particle residence times in agricultural river basins using a sediment budget model and fallout radionuclide tracers

Contemporary patterns in river basin sediment dynamics have been widely investigated but the timescales associated with current sediment delivery processes have received much less attention. Furthermore, no studies have quantified the effect of recent land use change on the residence or travel times of sediment transported through river basins. Such information is crucial for understanding contemporary river basin function and responses to natural and anthropogenic disturbances or management interventions. To address this need, we adopt a process‐based modelling approach to quantify changes in spatial patterns and residence times of suspended sediment in response to recent agricultural land cover change. The sediment budget model SedNet was coupled with a mass balance model of particle residence times based on atmospheric and fluvial fluxes of three fallout radionuclide tracers (⁷Be, excess ²¹⁰Pb and ¹³⁷Cs). Mean annual fluxes of suspended sediment were simulated in seven river basins (38–920 km²) in south‐west England for three land cover surveys (1990, 2000 and 2007). Suspended sediment flux increased across the basins from 0.5–15 to 1.4–37 kt y^‐1 in response to increasing arable land area between consecutive surveys. The residence time model divided basins into slow (upper surface soil) and rapid (river channel and connected hillslope sediment source area) transport compartments. Estimated theoretical residence times in the slow compartment decreased from 13–48 to 5.6–14 ky with the increase in basin sediment exports. In contrast, the short residence times for the rapid compartment increased from 185–256 to 260–368 d as the modelled connected source area expanded with increasing sediment supply from more arable land. The increase in sediment residence time was considered to correspond to longer sediment travel distances linked to larger connected source areas. This novel coupled modelling approach provides unique insight into river basin responses to recent environmental change not otherwise available from conventional measurement techniques. © 2014 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Aeolian sediment fingerprinting using a Bayesian mixing model

Identifying sand provenance in depositional aeolian environments (e.g. dunefields) can elucidate sediment pathways and fluxes, and inform potential land management strategies where windblown sand and dust is a hazard to health and infrastructure. However, the complexity of these pathways typically makes this a challenging proposition, and uncertainties on the composition of mixed‐source sediments are often not reported. This study demonstrates that a quantitative fingerprinting method within the Bayesian Markov Chain Monte Carlo (MCMC) framework offers great potential for exploring the provenance and uncertainties associated with aeolian sands. Eight samples were taken from dunes of the small (~58 km²) Ashkzar erg, central Iran, and 49 from three distinct potential sediment sources in the surrounding area. These were analyzed for 61 tracers including 53 geochemical elements (trace, major and rare earth elements (REE)) and eight REE ratios. Kruskal–Wallis H‐tests and stepwise discriminant function analysis (DFA) allowed the identification of an optimum composite fingerprint based on six tracers (Rb, Sr, ⁸⁷Sr, (La/Yb)_n, Ga and δCe), and a Bayesian mixing model was applied to derive the source apportionment estimates within an uncertainty framework. There is substantial variation in the uncertainties in the fingerprinting results, with some samples yielding clear discrimination of components, and some with less clear fingerprints. Quaternary terraces and fans contribute the largest component to the dunes, but they are also the most extensive surrounding unit; clay flats and marls, however, contribute out of proportion to their small outcrop extent. The successful application of these methods to aeolian sediment deposits demonstrates their potential for providing quantitative estimates of aeolian sediment provenances in other mixed‐source arid settings, and may prove especially beneficial where sediment is derived from multiple sources, or where other methods of provenance (e.g. detrital zircon U–Pb dating) are not possible due to mineralogical constraints. Copyright © 2017 John Wiley & Sons, Ltd.     

Relative velocities of discharge and sediment waves for the River Severn,UK

Abstract

It is generally accepted that the celerity of a discharge wave exceeds that of a floodwave. The discharge wave is the initial wavefront (shown by an increase in stage at a particular site), whereas the floodwave refers to the body of water moving downstream. Yet, few studies have investigated the varying relationship between discharge and suspended sediment concentration as floods propagate downstream. This paper examines the relative velocities of the discharge and sediment waves for natural flood events on the River Severn, UK. Four monitoring stations were established within the upper 35 km reach of the River Severn (drainage basin area 380 km2). Discharge was monitored using fixed structures, and suspended sediment concentrations were monitored at similar locations using Partech IR40C turbidity meters. Results showed discharge wave celerity increased with flood magnitude, but relationships were more complex for sediment wave celerity. Sediment wave celerity was greater than discharge wave celerity, and is attributed to the dominant source of sediment, which is most probably bank erosion.     

Estimation of suspended sediment concentration and yield using linear models,random forests and quantile regression forests

For sediment yield estimation, intermittent measurements of suspended sediment concentration (SSC) have to be interpolated to derive a continuous sedigraph. Traditionally, sediment rating curves (SRCs) based on univariate linear regression of discharge and SSC (or the logarithms thereof) are used but alternative approaches (e.g. fuzzy logic, artificial neural networks, etc.) exist. This paper presents a comparison of the applicability of traditional SRCs, generalized linear models (GLMs) and non‐parametric regression using Random Forests (RF) and Quantile Regression Forests (QRF) applied to a dataset of SSC obtained for four subcatchments (0·08, 41, 145 and 445 km²) in the Central Spanish Pyrenees. The observed SSCs are highly variable and range over six orders of magnitude. For these data, traditional SRCs performed inadequately due to the over‐simplification of relating SSC solely to discharge. Instead, the multitude of acting processes required more flexibility to model these nonlinear relationships. Thus, alternative advanced machine learning techniques that have been successfully applied in other disciplines were tested. GLMs provide the option of including other relevant process variables (e.g. rainfall intensities and temporal information) but require the selection of the most appropriate predictors. For the given datasets, the investigated variable selection methods produced inconsistent results. All proposed GLMs showed an inferior performance, whereas RF and QRF proved to be very robust and performed favourably for reproducing sediment dynamics. QRF additionally provides estimates on the accuracy of the predictions and thus allows the assessment of uncertainties in the estimated sediment yield that is not commonly found in other methods. The capabilities of RF and QRF concerning the interpretation of predictor effects are also outlined. Copyright © 2008 John Wiley & Sons, Ltd.     

Estimating suspended sediment concentrations from turbidity measurements and the calibration problem

In situ turbidity meters are being increasingly used to generate continuous records of suspended sediment concentration in rivers. However, the usefulness of the information obtained depends heavily on the existence of a close relationship between fluctuations in suspended sediment concentration and turbidity and the calibration procedure that relates suspended sediment concentration to the turbidity meter's signal. This study assesses the relationship between suspended sediment concentration and turbidity for a small (1·19 km²) rural catchment in southern Brazil and evaluates two calibration methods by comparing the estimates of suspended sediment concentration obtained from the calibrated turbidity readings with direct measurements obtained using a USDH 48 suspended sediment sampler. With the first calibration method, the calibration relationship is derived by relating the turbidity readings to simultaneous measurements of concentration obtained from suspended sediment samples collected from the vicinity of the turbidity probe during flood events. With the second method, the calibration is based on the readings obtained from the turbidity meter when the probe immersed in samples of known concentration prepared using soils collected from the catchment. Overall, there was a close link between fluctuations in suspended sediment concentration and turbidity in the stream at the outlet of the catchment, and the estimates of sediment concentration obtained using the first calibration method corresponded closely with the conventionally measured sediment concentrations. However, use of the second calibration method introduced appreciable errors. When the estimated sediment concentrations were compared with the measured values, the mean errors were ± 122 mg l^?1 and + 601 mg l^?1 for the first and second calibration procedures respectively. Copyright © 2007 John Wiley & Sons, Ltd.     

Dynamics of suspended sediment transport and yield in a large agricultural catchment,southwest France

The dynamics of suspended sediment transport were monitored continuously in a large agricultural catchment in southwest France from January 2007 to March 2009. The objective of this paper is to analyse the temporal variability in suspended sediment transport and yield in that catchment. Analyses were also undertaken to assess the relationships between precipitation, discharge and suspended sediment transport, and to interpret sediment delivery processes using suspended sediment‐discharge hysteresis patterns. During the study period, we analysed 17 flood events, with high resolution suspended sediment data derived from continuous turbidity and automatic sampling. The results revealed strong seasonal, annual and inter‐annual variability in suspended sediment transport. Sediment was strongly transported during spring, when frequent flood events of high magnitude and intensity occurred. Annual sediment transport in 2007 yielded 16 614 tonnes, representing 15 t km^?2 (85% of annual load transport during floods for 16% of annual duration), while the 2008 sediment yield was 77 960 tonnes, representing 70 t km^?2 (95% of annual load transport during floods for 20% of annual duration). Analysis of the relationships between precipitation, discharge and suspended sediment transport showed that there were significant correlations between total precipitation, peak discharge, total water yield, flood intensity and sediment variables during the flood events, but no relationship with antecedent conditions. Flood events were classified in relation to suspended sediment concentration (SSC)–discharge hysteretic loops, complemented with temporal dynamics of SSC–discharge ranges during rising and falling flow. The hysteretic shapes obtained for all flood events reflected the distribution of probable sediment sources throughout the catchment. Regarding the sediment transport during all flood events, clockwise hysteretic loops represented 68% from river deposited sediments and nearby source areas, anticlockwise 29% from distant source areas, and simultaneity of SSC and discharge 3%. Copyright © 2010 John Wiley & Sons, Ltd.     

Modelling suspended sediment discharge in a glaciated Arctic catchment–Lake Peters,Northeast Brooks Range,Alaska

Seasonal suspended sediment transfer in glaciated catchments is responsive to meteorological, geomorphological, and glacio-fluvial conditions, and thus is a useful indicator of environmental system dynamics. Knowledge of multifaceted fluvial sediment-transfer processes is limited in the Alaskan Arctic – a region sensitive to contemporary environmental change. For two glaciated sub-catchments at Lake Peters, northeast Brooks Range, Alaska, we conducted a two-year endeavour to monitor the hydrology and meteorology, and used the data to derive multiple-regression models of suspended sediment load. Statistical selection of the best models shows that incorporating meteorological or temporal explanatory variables improves performances of turbidity- and discharge-based sediment models. The resulting modelled specific suspended sediment yields to Lake Peters are: 33 (20–60) t km⁻² yr⁻¹ in 2015, and 79 (50–140) t km⁻² yr⁻¹ in 2016 (95% confidence band estimates). In contrast to previous studies in Arctic Alaska, fluvial suspended sediment transfer to Lake Peters was primarily influenced by rainfall, and secondarily influenced by temperature-driven melt processes associated with clockwise diurnal hysteresis. Despite different sub-catchment glacier coverage, specific yields were the same order of magnitude from the two primary inflows to Lake Peters, which are Carnivore Creek (128 km²; 10% glacier coverage) and Chamberlin Creek (8 km²; 23% glacier coverage). Seasonal to longer-term sediment exhaustion and/or contrasting glacier dynamics may explain the lower than expected relative specific sediment yield from the more heavily glacierized Chamberlin Creek catchment. Absolute suspended sediment yield (t yr⁻¹) from Carnivore Creek to Lake Peters was 27 times greater than from Chamberlin Creek, which we attribute to catchment size and sediment supply differences. Our results provide a foundational understanding of the current sediment transfer regime and are useful for predicting changes in fluvial sediment transport in glaciated Alaskan Arctic catchments.     

Storage,properties and seasonal variations in fine‐grained bed sediment within the main channel and headwaters of the River Sanginjoki,Finland

Lowland catchments in Finland are intensively managed, promoting erosion and sedimentation that negatively affects aquatic environments. This study quantified fine‐grained bed sediment in the main channel and upstream headwaters of the River Sanginjoki (399.93 km²) catchment, Northern Finland, using remobilization sediment sampling during the ice‐free period (May 2010–December 2011). Average bed sediment storage in river was 1332 g m^?2. Storage and seasonal variations were greater in small headwater areas (total bed sediment storage mean 1527 g m^?2, range 122–6700 g m^?2 at individual sites; storage of organic sediment: mean 414 g m^?2, range 27–3159 g m^?2) than in the main channel (total bed sediment storage: mean 1137 g m^?2, range 61–4945 g m^?2); storage of organic sediment: mean 329 g m^?2, range 13–1938 g m^?2). Average reach‐specific bed sediment storage increased from downstream to upstream tributaries. In main channel reaches, mean specific storage was 8.73 t km^?1, and mean specific storage of organic sediment 2.45 t km^?1, whereas in tributaries, it was 126.94 and 34.05 t km^?1, respectively. Total fine‐grained bed sediment storage averaged 563 t in the main channel and 6831 t in the catchment. The proportion of mean organic matter at individual sites was 15–47% and organic carbon 4–455 g C m^?2, with both being highest in small headwater tributaries. Main channel bed sediment storage comprised 52% of mean annual suspended sediment flux and stored organic carbon comprised 7% of mean annual total organic carbon load. This indicates the importance of small headwater brooks for temporary within‐catchment storage of bed sediment and organic carbon and the significance of fine‐grained sediment stored in channels for the suspended sediment budget of boreal lowland rivers. Copyright © 2013 John Wiley & Sons, Ltd.     

Predicting suspended sediment concentrations in the Meuse river using a supply‐based rating curve

A rating curve provides a reasonable estimate of the suspended sediment concentration at a given discharge. However, analysis of a detailed 9‐year time‐series of suspended sediment concentration (SSC) and discharge Q of the Meuse River in The Netherlands indicates that SSC is (besides discharge) controlled by exhaustion and replenishment of different sediment sources. Clockwise hysteresis and other effects of sediment exhaustion can be observed during and after flood events, and the effects of stockpiling of sediment in the river bed during low‐discharge periods are obvious in the SSC of the next flood. In a single regression equation we have implemented a parameter that represents the presence or absence of stock for sediment uptake. In comparison with a rating curve of SSC and Q, adding this parameter is shown to be a more reliable and comprehensive method to predict SSCs at all discharge regimes with all preceding discharge conditions, for single‐peaked and multi‐peaked runoff events as well as for low flow conditions. The method is probably applicable to other small‐ to medium‐scaled river basins. Copyright © 2007 John Wiley & Sons, Ltd.     

The impact of pro‐glacial lakes on downstream sediment delivery in Norway

Glacier recessions caused by climate change may uncover pro‐glacial lakes that form important sedimentation basins regulating the downstream sediment delivery. The impact of modern pro‐glacial lakes on fluvial sediment transport from three different Norwegian glaciers: Nigardsbreen, Engabreen and Tunsbergdalsbreen, and their long‐term development has been studied. All of these lakes developed in modern times in overdeepened bedrock basins. The recession of Nigardsbreen uncovered a 1.8 km long and on average 15 m deep pro‐glacial lake basin during 1937 to 1968. Since then the glacier front has been situated entirely on land, and the sediment input and output of the lake has been measured. The suspended sediment transport into and out of the lake averaged 11 730 t yr^?1 and 2340 t yr^?1 respectively. Thus, 20% remained in suspension at the outlet. The measured mean annual bedload supplied to the lake was 11 800 t yr^?1, giving a total transport of 23 530 t yr^?1 which corresponds to a specific sediment yield of 561 t km^?2 yr^?1. A 1.9 km long and up to 90 m deep pro‐glacial lake basin downstream from Engabreen glacier was uncovered during 1890 to 1944. The average suspended sediment load delivered from the glacier during the years 1970–1981 amounted to 12 375 t yr^?1and the transport out of the lake was 2021 t yr^?1, giving an average of 16% remaining in suspension. The mean annual bedload was 8000 t yr^?1, thus the total transport was 20 375 t yr^?1, giving a specific sediment yield of 566 t km^?2 yr^?1. For Tunsbergdalsbreen glacier, measurements in the early 1970s indicated that the suspended sediment transport was on average 44 000 t yr^?1. From 1987 to 1993 the recession of the glacier uncovered a small pro‐glacial lake, 0.3 km long and around 9 m deep. Downstream from this, the suspended sediment load measured in 2009 was 28 000 t yr^?1, indicating that as much as 64% remained in suspension. Flow velocity, grain size of sediment, and morphology of the lake are important factors controlling the sedimentation rate in the pro‐glacial lakes. A survey of the sub‐glacial morphology of Tunsbergdalsbreen revealed that there are several overdeepened basins beneath the glacier. The largest is 4 km long and 100 m deep. When the glacier melts back they will become lakes and act as sedimentation basins. Despite an expected increase in sediment yield from the glacier, little sediment will pass these lakes and downstream sediment delivery will be reduced markedly. Beneath Nigardsbreen there was only a small depression that may form a lake and the sediment delivery will not be significantly affected. © 2014 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Spatiotemporal variations of suspended sediment transport in the upstream and midstream of the Yarlung Tsangpo River (the upper Brahmaputra), China

The Yarlung Tsangpo River, which flows from west to east across the southern part of the Tibetan Plateau, is the longest river on the plateau and an important center for human habitation in Tibet. Suspended sediment in the river can be used as an important proxy for evaluating regional soil erosion and ecological and environmental conditions. However, sediment transport in the river is rarely reported due to data scarcity. Results from this study based on a daily dataset of 3 years from four main stream gauging stations confirmed the existence of great spatiotemporal variability in suspended sediment transport in the Yarlung Tsangpo River, under interactions of monsoon climate and topographical variability. Temporally, sediment transport or deposition mainly occurred during the summer months from July to September, accounting for 79% to 93% of annual gross sediment load. This coincided with the rainy season from June to August that accounted for 51% to 80% of annual gross precipitation and the flood period from July to September that accounted for approximately 60% of annual gross discharge. The highest specific sediment yield of 177.6 t/km²/yr occurred in the upper midstream with the highest erosion intensity. The lower midstream was dominated by deposition, trapping approximately 40% of total sediment input from its upstream area. Sediment load transported to the midstream terminus was 10.43 Mt/yr with a basin average specific sediment yield of 54 t/km²/yr. Comparison with other plateau‐originated rivers like the upper Yellow River, the upper Yangtze River, the upper Indus River, and the Mekong River indicated that sediment contribution from the studied area was very low. The results provided fundamental information for future studies on soil and water conservation and for the river basin management. Copyright © 2017 John Wiley & Sons, Ltd.