Planform dynamics of the Lower Mississippi River

This paper presents an analysis of the planform behaviour of the Lower Mississippi River (LMR) using a series of maps and hydrographic surveys covering the period 1765–1975. Data allow analysis at various time and space scales, using fixed and statistically defined reaches, both before and after extensive channel modification. Previous research has interpreted planform change in relation to geomorphological or engineering regime‐type analyses of channel length and width for the LMR as a ‘single system’. The analysis here is broadly consistent with these approaches, but highlights the importance of meander geometry, in the form of the radius of curvature:width ratio. This neglected factor helps resolve paradoxes relating to observed changes in sediment transport and channel stability. When viewed over smaller time and space scales, analysis of dynamics using fixed reach boundaries reveals a downstream trend in the pattern of planform behaviour, which is closely related to the distribution of valley floor deposits, and which also reflects neotectonic influences. Analysis of changes using statistically determined reach boundaries shows that, over shorter time scales, meander trains are continually formed and modified over a period of approximately 120 years. Zones of more‐or‐less dynamic behaviour thus move through the LMR. The research also provides a context for 20th century engineering interventions to the river. These have constrained the magnitude of planform adjustment, but also altered the kind of response that is now possible in relation to changes in discharge and sediment load, and as a consequence of internal feedbacks within the LMR system. Copyright © 2006 John Wiley & Sons, Ltd.     

Late Holocene channel and floodplain development in a wandering gravel‐bed river: the River South Tyne at Lambley,northern England

Geomorphological analyses of the morphology, lithostratigraphy and chronology of Holocene alluvial fills in a 2·75 km long piedmont reach of the wandering gravel‐bed River South Tyne at Lambley in Northumberland, northern England, have identified spatial and temporal patterns of late Holocene channel and floodplain development and elucidated the relationship between reach‐ and subreach‐scale channel transformation and terrace formation. Five terraced alluvial fills have been dated to periods sometime between c. 1400 BC –AD 1100, AD 1100–1300, AD 1300–1700, AD 1700–1850 and from AD 1850 to the present. Palaeochannel morphology and lithofacies architecture of alluvial deposits indicate that the past 3000 years has been characterized by episodic channel and floodplain change associated with development and subsequent recovery of subreach‐scale zones of instability which have been fixed in neither time nor space. Cartographic and photographic evidence spanning the past 130 years suggests channel transformation can be accomplished in as little as 50 years. The localized and episodic nature of fluvial adjustment at Lambley points to the operation of subreach‐scale controls of coarse sediment transfers. These include downstream propagation of sediment waves, as well as internal controls imposed by differing valley floor morphology, gradient and boundary materials. However, the preservation of correlated terrace levels indicates that major phases of floodplain construction and entrenchment have been superimposed over locally complex patterns of sediment transfer. Reach‐scale lateral and vertical channel adjustments at Lambley appear to be closely related to climatically driven changes in flood frequency and magnitude, with clusters of extreme floods being particularly important for accomplishing entrenchment and reconfiguring the pattern of localized instability zones. Confinement of flood flows by valley entrenchment, and contamination of catchment river courses by metal‐rich fine sediments following recent historic mining operations, have combined to render the South Tyne at Lambley increasingly sensitive to changes in flood regimes over the past 1000 years. Copyright © 2000 John Wiley & Sons, Ltd.     

Character of channel planform change and meander development: Luangwa River,Zambia

Air photo interpretation and field survey were used to examine rates and patterns of planform change over the last 40 years on an 80 km reach of the Luangwa River, Zambia. The river, a tributary of the Zambezi, is a 100–200 m wide, medium sinuosity sand‐bed river (sinuosity index 1·84). High rates of channel migration (<33 m a⁻¹) and cutoffs on meandering sections are frequent. Some meandering reaches, however, have remained relatively stable. A form of anastomosing with anabranches up to 14 km in length is also a characteristic. Patterns of meander development vary between bends but all can be described in relation to traditional geomorphic models; change occurs by translation, rotation, double‐heading, concave bank bench formation and cutoff causing river realignment. At the local scale spatial variability in bank resistance, induced by floodplain sedimentology, controls rate of bank erosion, and valley‐side channel ‘deflection’ is also apparent. Copyright © 2000 John Wiley & Sons, Ltd.     

Rate of floodplain reworking in response to increasing storm‐induced floods,Squamish River,south‐western British Columbia,Canada

Relations among hydroclimatic and channel planform changes on Squamish River are presented for the period 1956–2007. Squamish River basin occupies 3600 km² of mountainous terrain in south‐western British Columbia, about 50 km north of Vancouver. The magnitude, volume and duration of extreme floods (Q ≥ 1500 m³/s) exhibit respective temporal increases of 50, 450 and 300%. The increase in extreme floods is attributed to the intensification of late‐season (August–December) Pacific storms that have produced increases in precipitation amounts, intensity and duration of respectively 340, 200 and 200% over the same period. Changes in floodplain‐surface area calculated from the geographic information system (GIS) differencing of sequential large‐scale aerial photographs indicate that the rate of geomorphic change in Squamish River has accelerated during the 1980s to the mid‐1990s. Among four study reaches of varying planform, erosional, depositional and cumulative changes in floodplain surface‐area have rapidly increased. Channel‐change activity after 1980 has increased by a factor of two to six compared with the period prior to 1980. Erosion is currently outpacing deposition in the majority of study reaches. Although channel geometry generally exhibits no uniform pattern of response to the increase in extreme floods, the meandering reaches have straightened over the duration of the study period. The increase in the magnitude and duration of the annual flood appears to be the principal cause of this recent acceleration of channel change. Copyright © 2010 John Wiley & Sons, Ltd.     

Multi-thread river channels: A perspective on changing European alpine river systems

Rivers are natural systems whose planform pattern in alluvial reaches reflects a balance between three fundamental ingredients: flow energy, sediment calibre and supply, and vegetation. Whilst early research on river channel classification emphasised flow (stream power) and sediment controls, the impact of vegetation is now recognised in increasingly detailed classification schemes. Different planform patterns are more or less sensitive to changes in these three fundamental ingredients, which in the absence of human interventions all respond to changes in climate, allowing different morphological configurations to evolve and in some cases shift from one planform style to another. Multi-thread, braided and transitional river channel styles are common in European regions where conditions for the development of these planform styles, notably high bed material supply and steep channel gradients, exist. However, widespread, intense human impacts on European river systems, particularly over recent centuries, have caused major changes in river styles. Human activities impact on all three major controls on channel pattern: flow regime, sediment regime, vegetation (both riparian and catchment-wide). Whilst the mix of human activities may vary greatly between catchments, research from across Europe on the historical evolution of river systems has identified consistent trends in channel pattern change, particularly within rivers draining the Alps. These trends involve periods of narrowing and widening, and also switching between multi-thread and single-thread styles. Although flow regulation is often the key focus of explanations for human-induced channel change, our review suggests that human manipulation of sediment supply is a major, possibly the dominant, causal factor. We also suggest that “engineering” by riparian trees can accelerate transitions in pattern induced by flow and sediment change and can also shift transition thresholds, offering a new perspective for interpretation of channel change in addition to the focus on flow and sediment regime within existing models. Whilst the development of planform classifications of increasing complexity have been crucial in developing terminology and highlighting the main factors that control channel styles, additional approaches are needed to understand, predict and manage European Alpine river systems. A combination of field, laboratory and numerical modeling approaches are needed to advance the process understanding that is necessary to anticipate river landscape, particularly planform, changes and thus to make ecologically sound management choices.     

Sedimentation in the riparian zone of an incising river

This paper focuses on one aspect of riparian zone change associated with channel incision. It presents information on sedimentation within the riparian zone of the River Garonne, France, derived from both historical and contemporary sources. The riparian zone investigated is morphologically complex, containing a remnant island and cut‐off channel. Information drawn from historical and contemporary sources permits the reconstruction of channel planform and cross‐profile change, as well as an assessment of changes in riparian zone sedimentation rates and patterns. Very significant changes are identified over the last 50 years: a change from a multiple thread to single thread channel planform; high rates of riparian zone sedimentation of the order of 0·5 to 2·5 cm a⁻¹; clear spatial patterns in over‐bank sedimentation, reflecting topographic and vegetational variations and flood event magnitude; and a reduction in morphological and vegetational diversity through the period, which is expected to continue as the zone is transformed into an increasingly homogeneous sediment sink. Copyright © 2001 John Wiley & Sons, Ltd.     

Restoring a glacier-fed river: Past and present morphodynamics of a degraded channel in the Italian Alps

The present study explores the evolutionary trajectory of the glacier-fed Mareit River (South Tyrol, Italian Alps), where a large restoration programme was implemented in 2008–2009. River corridor changes before and after the restoration works were assessed using historical maps, recent field observations, topographic surveys and topographic differencing. Trends of anthropic (forest cover, channel works, gravel mining) and natural (glacial cover, precipitation, flow regime) factors controlling channel morphology – at both catchment and reach scales – were reconstructed. From the mid-19th century, the evolutionary trajectory of the Mareit River followed a degradational trend, characterized by channel narrowing, bed incision and planform simplification. Direct, in-channel human alterations – mainly in the form of bank protections (in the late 19th century), gravel mining (mostly in the 1970s) and grade-control works (since the 1980s) – dominated the historical adjustments before the restoration. In 2008–2009, a segment of the Mareit was restored by widening the channel, partly removing the check-dams and shaping a braided pattern within a laterally constrained corridor. Post-work monitoring shows that the restoration improved both the morphological quality and the geomorphic diversity. At present, the channel is subject to narrowing and slight bed level incision, with islands and floodplains progressively expanding at the expenses of the active channel. This trend is likely to continue in the next decades based on the expected future flow regime, and indeed the Mareit River seems to be attaining a ‘miniaturized’ version of the anabranching pattern of the mid-19th century. Overall, this restoration approach and the associated evolutionary trajectory is considered positive, because it leads to a complex mosaic of geomorphic units, dynamically self-adjusting to the time-varying driving variables. The formation of a morphodynamically active corridor, while keeping artificially non-erodible boundaries, represents an optimal strategy to integrate ecological improvements with flood risk mitigation in the densely populated Alpine valleys. © 2020 John Wiley & Sons, Ltd.     

Timescale dependence in river channel migration measurements

Accurately measuring river meander migration over time is critical for sediment budgets and understanding how rivers respond to changes in hydrology or sediment supply. However, estimates of meander migration rates or streambank contributions to sediment budgets using repeat aerial imagery, maps, or topographic data will be underestimated without proper accounting for channel reversal. Furthermore, comparing channel planform adjustment measured over dissimilar timescales are biased because short- and long-term measurements are disproportionately affected by temporary rate variability, long-term hiatuses, and channel reversals. We evaluate the role of timescale dependence for the Root River, a single threaded meandering sand- and gravel-bedded river in southeastern Minnesota, USA, with 76 years of aerial photographs spanning an era of landscape changes that have drastically altered flows. Empirical data and results from a statistical river migration model both confirm a temporal measurement-scale dependence, illustrated by systematic underestimations (2–15% at 50 years) and convergence of migration rates measured over sufficiently long timescales (> 40 years). Frequency of channel reversals exerts primary control on measurement bias for longer time intervals by erasing the record of observable migration. We conclude that using long-term measurements of channel migration for sediment remobilization projections, streambank contributions to sediment budgets, sediment flux estimates, and perceptions of fluvial change will necessarily underestimate such calculations. © 2019 John Wiley & Sons, Ltd.     

A coupled hierarchical modeling approach to simulating the geomorphic response of river systems to anthropogenic climate change

Anthropogenic climate change is expected to change the discharge and sediment transport regime of river systems. Because rivers adjust their channels to accommodate their typical inputs of water and sediment, changes in these variables can potentially alter river morphology. In this study, a hierarchical modeling approach was developed and applied to examine potential changes in reach‐averaged bedload transport and spatial patterns of erosion and deposition for three snowmelt‐dominated gravel‐bed rivers in the interior Pacific Northwest. The modeling hierarchy was based on discharge and suspended‐sediment load from a basin‐scale hydrologic model driven by a range of downscaled climate‐change scenarios. In the field, channel morphology and sediment grain‐size data for all three rivers were collected. Changes in reach‐averaged bedload transport were estimated using the Bedload Assessment of Gravel‐bedded Streams (BAGS) software, and the Cellular Automaton Evolutionary Slope and River (CAESAR) model was used to simulate the spatial pattern of erosion and deposition within each reach to infer potential changes in channel geometry and planform. The duration of critical discharge was found to control bedload transport. Changes in channel geometry were simulated for the two higher‐energy river reaches, but no significant morphological changes were found for a lower‐energy reach with steep, cohesive banks. Changes in sediment transport and river morphology resulting from climate change could affect the management of river systems for human and ecological uses. Copyright © 2015 John Wiley & Sons, Ltd.     

Geomorphic response of the Jingjiang Reach to the Three Gorges Project operation

Upstream damming often causes significant downstream geomorphic adjustments. Remarkable channel changes have occurred in the Jingjiang Reach of the Middle Yangtze River, since the onset of the Three Gorges Project (TGP). Therefore, it is important to investigate the variations in different fluvial variables, for better understanding of the channel evolution characteristics as an example of the Jingjiang Reach. Recent geomorphic adjustments in the study reach have been investigated quantitatively, including variations in sediment rating curve, fluvial erosion intensity, channel deformation volume and bankfull channel geometry. These fluvial variables adjusted in varying degrees in response to the altered flow and sediment regime caused by the TGP operation. A focus of this study has been especially on variation in the bankfull channel geometry. Calculated bankfull dimensions at section‐ and reach‐scale indicate that: (i) there were significant bank‐erosion processes in local regions without bank‐protection engineering, with empirical relations being developed to reproduce the variation in bankfull widths at four typical sections; (ii) the variation in the reach‐scale channel geometry occurred mainly in the component of bankfull depth, owing to the construction of large‐scale bank‐revetment works, with the depth increasing from 13.7 m in 2002 to 15.0 m in 2014, and with an increase in the corresponding bankfull area of about 11%; and (iii) the reach‐scale bankfull channel dimensions responded to the previous 5‐year average fluvial erosion intensity during flood seasons at Zhicheng, with higher correlations for the depth and area being obtained when calibrated by the measurements in 2002–2012. Furthermore, these relations developed for the section‐ and reach‐scale bankfull channel geometry were also verified by the observed data in 2013–2014, with encouraging results being obtained. Copyright © 2016 John Wiley & Sons, Ltd.     

Past,present and future of a meandering river in the Bolivian Amazon basin

Field observations on small rivers of the Amazon basin are less common due to their remote location and difficult accessibility. Here we show, through remote sensing analysis and field works, the planform evolution and riverbed topography of a small river located in the upper foreland Amazon basin, the Ichilo River. By tracking planform changes over 30 years, we identified the factors that control meander migration rates in the Ichilo River: cutoffs, climate and human interventions. The data suggest that neck cutoffs are the main controls in the Ichilo River, with an annual density of 0.022 cutoffs/km. In addition, climate controls have been identified in the form of high-precipitation events that may have promoted cutoffs, an increase in meander migration rate and channel widening. The width distribution of the Ichilo River is well represented by general extreme value and inverse Gaussian distributions. The spatiotemporal variability of meandering migration rates in the Ichilo River is analysed in two locations where neck cutoffs are expected. Analysing the distance across the neck in these two points, we predict the occurrence of a new cutoff. The combined methodology of bathymetric surveys and structure from motion photogrammetry shows us the Ichilo riverbed topography and banks at high resolution, where two scour holes were identified. Finally, we discuss the impact of planform changes of the Ichilo River on communities that are established along its riverbanks.     

Modelling the decadal dynamics of reach-scale river channel evolution and floodplain turnover in CAESAR-Lisflood

Sedimentary deposits provide records of environmental change quantifying erosion fluxes conditioned by natural and anthropogenic disturbances. These fluxes are lagged by internal storage, particularly within floodplains, complicating reconstruction of environmental changes. The time sediment remains in storage underpins the interpretation of sedimentary records and accurate monitoring of pollutant fluxes. Turnover time is a measure of the timeframe to erode every floodplain surface. CAESAR-Lisflood is used to simulate fluvial evolution at reach scale, providing a basis for quantifying environmental changes on the timescales of sediment storage. We evaluate the accuracy of CAESAR-Lisflood simulations of channel changes and turnover times for alluvial floodplains using historical channel changes reconstructed for 10 reaches in northern England to quantify model accuracy in replicating mean annual erosion, deposition and channel lateral migration rates, alongside planform morphology. Here, a split-sample testing approach is adopted, whereby five of the reaches were calibrated and the resulting parameter values were applied to the other reaches to evaluate the transferability of parameter settings. The lowest overall integrated error identified the best-fit simulations and showed that modelled process rates were within ~25–50% of rates from historical reconstructions, generally. Calibrated parameters for some reaches are widely transferable, producing accurate geomorphic changes for some uncalibrated sites. However, large errors along some reaches indicate that reach-specific parameterization is recommended. Turnover times are underpinned by the assumption that areas of floodplain previously unvisited by the channel are reworked. This assumption has been challenged by studies that show floodplain (re)occupation rates vary spatially. However, this limitation is less important for the short-duration simulations presented here. The simulations reconstruct floodplain turnover times estimated by mapped rates mostly successfully, demonstrating the potential applicability of calibrated parameters over much longer timescales. Errors in the form of under-predicted erosion rates propagated, resulting in over-predicted turnover times by even greater magnitudes. © 2020 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

Morphological responses in a meandering and island-braided reach of the Middle Yangtze River to the Three Gorges Reservoir impoundment

Lateral migration is an important form of morphological changes on the Middle Yangtze River (MYR), particularly for the lower Jingjiang reach. The Three Gorges Reservoir (TGR) has substantially reduced sediment supply to the downstream river channels since its impoundment in June 2003. The scientific understanding of how decrease of sediment influences the processes of bank erosion and channel adjustments is complex and limited. In the present paper, the morphological responses in a typical meandering and island-braided river segment of the MYR to the filling of the TGR were investigated by a 3-D morphodynamic model. The potential of the 3-D model has been demonstrated by the observed data. The morphological evolutions in the Shishou bend during the first 12 years of the TGR impound-ment were predicted. The effects of the TGR operation on the planform evolutions in the study reach were analyzed based on the simulated results. Sediment load is decreased by 75%due to the early filling of the TGR. The magnitude of bed degradation with less sediment load due to the TGR operation is increased compared with the pre-dam situation. Qualitatively, the overall planform evolution trends in the Shishou bend after the TGR operation are similar to that without the TGR operation. The magnitude of lateral migration has been increased in some part of the channel bend, where the morphological response of the TGR operation exhibits more lateral migration rather than vertical degradation. Scouring at the bank toe enhances bank failure. Decrease of sediment load and weak bank anti-scour ability as well as the significant helical flow can be responsible for intensified bank erosion in the channel bend.     

The evolution of meandering rivers in sedimentary basins: Insights from the lower Drava (Hungary/Croatia)

Rivers flowing through sedimentary basins are subjected to a variety of controls. The main goal of our study was to identify the effect of external (e.g. climate changes, tectonics) and internal controls (e.g. sediment transport, deposition, vegetation cover) on the evolution of meandering rivers flowing through sedimentary basins using the example of the lower Drava River (Europe, Hungary/Croatia). Field research was conducted along a 50-km-long section of the valley. Sedimentary data from boreholes and corings, 35 km of ground-penetrating radar surveys and analyses of digital maps were conducted to reconstruct channel planform changes. Traces of four meander belts were identified, and 39 AMS radiocarbon dates were used to distinguish the chronology of the fluvial events. The evolution of the lower Drava River comprised alternating periods of deposition (formation of aggrading meander belt) and avulsions. The channel belts were formed owing to upstream sediment delivery and floodplain storage. Changes in climate humidity and the occurrence of high flows influenced the planform of the meanders within particular channel belts. The oldest channel was active at least ~40 000 cal. BP before being reworked by subsequent meanders active between the Late Pleniglacial (30 000–14 700 cal. BP) and Late Glacial (~11 000 cal. BP) periods. The channel belts shifted to the south in the Holocene, between ~11 000 and 250 cal. BP due to the presence of a thrust fault situated diagonally to the Drava Valley. Results show channel width, channel belt width and the surface area of point bar deposits increased in the succeeding generations of meanders and that the style and sedimentary architecture of the channel belts were dominantly dependent on autogenic controls, that is, sediment delivery, aggradation and erosional events (e.g. formation of chute cut-offs).     

Historical channel narrowing along the Rio Grande near Albuquerque,New Mexico in response to peak discharge reductions and engineering: magnitude and uncertainty of change from air photo measurements

Over the last century, geomorphic processes along the Middle Rio Grande have been altered by flood control and bank stabilization projects, intensified land and water use, and climate change. In response to potential risks to infrastructure and ecological integrity, recent (1985–2008) adjustment was investigated and historic (1918–1985) changes in Rio Grande channel planform through the Albuquerque, New Mexico, area were reviewed, especially in relation to changes in annual peak discharge and river engineering measures. Using a GIS, channel characteristics were digitized from georeferenced photographs and analyzed with particular attention to quantifying potential measurement error and its propagation. Error associated with average channel widths and channel area ranged between 4 and 13%. For smaller polygons, e.g. islands, error was higher (11 to 40% for width and >200% for area) because width error is large relative to polygon width. Between 1918 and 1963, average channel widths decreased 8 m/yr, from 516 ± 67 m to 176 ± 7 m, mostly due to decreasing peak flows and the implementation of flood control and other engineering measures. From 1985 to 2008, widths decreased 0·7 m/yr, from 176 ± 23 m to 146 ± 5 m, accompanied by an increase in vegetated island area which largely coincided with low flow periods. Narrowing was concentrated at tributary inputs and in the upstream part of the reach, where bedload trapping by Cochiti Dam has caused degradation. Bank protection structures and dense vegetation limit bank erosion in the reach, but erosion is significant where expanding islands, incision, and increased meandering force water against banks. Copyright © 2010 John Wiley & Sons, Ltd.     

Temporal and spatial adjustments of channel migration and planform geometry: responses to ENSO driven climate anomalies on the tropical freely‐meandering Aguapeí River,São Paulo,Brazil

Two reaches of Aguapeí River, a left‐bank tributary of the Paraná River in western São Paulo state, Brazil, were studied with the objective of assessing the role of bend curvature on channel migration in this wet‐tropical system and examining if land‐use changes or ENSO (El Niño Southern Oscillation) driven climate anomalies over nearly half a century have changed migration behaviour and planform geometry. Meander‐bend migration rates and morphometric parameters including meander‐bend curvature, sinuosity, meander wavelength and channel width, were measured and the frequency of bend cutoffs was analysed in order to determine the rate of change of channel adjustment over a 48 year period to 2010. Results show that maximum average channel migration rates occur in bends with curvatures of about 2–3 r_c/w, similar to other previously studied temperate and subarctic freely meandering rivers although not as pronounced and with a tendency to favour tighter curvature. From 1962 to 2010 the Aguapeí River has undergone a significant reduction in sinuosity, a shift from tightly curving to more open bends, an overall decline in channel migration rates, an associated decrease in the frequency of neck‐cutoffs and an overall increase in channel width. As the majority of the drainage basin (96%) was already deforested in 1962, channel form and process changes were, unlike an interpretation for an adjacent river system, not attributed to altered land‐use but rather to a sharp ENSO‐driven increase in the magnitude of peak flow‐discharges of some 32% since 1972. In summary, this research revealed that recent climate and associated flow regime changes are having a pronounced effect on river channel behaviour in the Aguapeí River investigated here. Copyright © 2018 John Wiley & Sons, Ltd.     

Effects of lateral confinement in natural and leveed reaches of a gravel‐bed river: Snake River,Wyoming, USA

This study examined the effects of natural and anthropogenic changes in confining margin width by applying remote sensing techniques – fusing LiDAR topography with image‐derived bathymetry – over a large spatial extent: 58 km of the Snake River, Wyoming, USA. Fused digital elevation models from 2007 and 2012 were differenced to quantify changes in the volume of stored sediment, develop morphological sediment budgets, and infer spatial gradients in bed material transport. Our study spanned two similar reaches that were subject to different controls on confining margin width: natural terraces versus artificial levees. Channel planform in reaches with similar slope and confining margin width differed depending on whether the margins were natural or anthropogenic. The effects of tributaries also differed between the two reaches. Generally, the natural reach featured greater confining margin widths and was depositional, whereas artificial lateral constriction in the leveed reach produced a sediment budget that was closer to balanced. Although our remote sensing methods provided topographic data over a large area, net volumetric changes were not statistically significant due to the uncertainty associated with bed elevation estimates. We therefore focused on along‐channel spatial differences in bed material transport rather than absolute volumes of sediment. To complement indirect estimates of sediment transport derived by morphological sediment budgeting, we collected field data on bed mobility through a tracer study. Surface and subsurface grain size measurements were combined with bed mobility observations to calculate armoring and dimensionless sediment transport ratios, which indicated that sediment supply exceeded transport capacity in the natural reach and vice versa in the leveed reach. We hypothesize that constriction by levees induced an initial phase of incision and bed armoring. Because levees prevented bank erosion, the channel excavated sediment by migrating rapidly across the restricted braidplain and eroding bars and islands. Copyright © 2017 John Wiley & Sons, Ltd.     

Spatio‐temporal patterns of channel changes in response to a major flood event: the case of the Magra River (central–northern Italy)

On October 25^th 2011, the Magra River (central–northern Italy) was affected by a significant flood event with an estimated return interval ranging from 30 to 200 years. This study investigates the morphological responses of the Magra River to this major flood event with the aims of (i) documenting the channel changes which occurred in response to the flood; (ii) analysing this response within the context of the historical trend of width changes; (iii) investigating the possible factors controlling the spatial pattern and the intensity of the observed changes. Significant channel widening was documented along the entire length studied (about 34 km), ranging from 3% to 90% of the pre‐flood channel width. Braided reaches were characterized by the most severe planimetric changes. Although characterized by high rates of change, these variations are, however, amply included in the historical range of channel width variability over approximately the last 150 years (from 1877 to present day), and are comparable with ( though generally lower than) the channel width of the 1950s. Statistical analyses (simple and multiple regressions) between the observed changes in channel width and a series of selected morphological and hydraulic controlling factors showed no robust correlations to explain the spatial pattern and the variability of channel adjustments. Instead, major adjustments occurred along reaches characterized by the confluence of those streams draining the sub‐catchments where the storm was concentrated. Copyright © 2014 John Wiley & Sons, Ltd.     

Morphology of riffle–pool sequences in the River Severn,England

Despite the occurrence of riffle–pool sequences in many rivers there are few data concerning riffle–pool unit morphology. Of many criteria proposed to identify riffle–pool units, only three methods can be regarded as objective and robust. These are the ‘zero‐crossing’, the ‘spectral analysis’ and the ‘control‐point’ methods. In this paper statistics are developed using the first two of these methods to describe the streamwise morphology of 275 riffles and 285 pools which form a continuous 32·1 km reach of the bed of the River Severn in Shropshire, England. Yalin's theoretical relationship between the average riffle:pool unit length ( λ _p) and channel width ( W ), λ _p = 3 W , applies to the River Severn. Reach‐average riffle height ( H ) is a constant proportion of bankfull depth ( h ); typically H ≅ 0·16 h . Riffle height is a positive function of riffle length. Pool depth is a positive function of pool length. However, both riffle length and pool length increase more rapidly than the bed‐level amplitude, such that long riffles or pools are relatively ‘flat’. As channel gradient reduces, bedforms flatten and become more asymmetric as riffle stoss sides and the proximal slope of pools lengthen at the expense of riffle lee sides and pool distal slopes. The statistical relationships between riffle steepness (H/L) and water depth are similar to those for equilibrium subaqueous dunes. The Severn data are consistent with Yalin's theoretical analysis relating riffle bedform length (L _r) to water depth, i.e. L _r = α2π h, wherein α ≅ 1 for steep near‐equilibrium bedforms but α ≅ 2 to 3 as the relative depth decreases and riffles become long, low features. Theoretical consideration and turbulence data indicate that the frequency of coherent turbulent‐flow structures associated with the riffle–pool mixing length in the Severn should be of the order of 50 to 100 s. The morphological similarity of the steepest River Severn riffles with dunes raises intriguing questions with respect to self‐similar, convergent organization of periodic alluvial bedforms and to bedform dynamic classification particularly. Copyright © 2000 John Wiley & Sons, Ltd.     

River behaviour and Holocene alluviation: The River Severn at Welshpool,mid-Wales,U.K.

A combination of archaeological evidence, ¹⁴C dates, terrace mapping, heavy metal analysis, grain size analysis and historical maps is used in a detailed analysis of the alluvial history of the River Severn floodplain around Welshpool in mid-Wales, U.K. ‘Welshpool Gravels’ underlie a higher terrace surface up to 6–7 m above the present channel. They form a sequence of gravels at least 30 m in thickness. The upper surface is characterized by a series of braided palaeochannel patterns. These sediments were probably deposited at the end of the last glaciation as outwash, and are contemporaneous with other high, gravelly terrace deposits found in the Severn and other mid-Wales basins. Overlying the Welshpool Gravels on the contemporary floodplain are a variable thickness of finer sediments, the ‘Leighton Silts’. Morphological mapping and dating of two cut-offs to 2850 ± 60 a BP and 1190 ± 70 a BP indicates that a channel pattern similar to the present planform had formed by the mid to late Holocene. From this period, floodplain development has been dominated by a single-thread meandering channel with fine vertical sedimentation and limited lateral gravel accretion. Abandonment of extended lengths of channel formed by an avulsion mechanism is apparent. A combination of historical map data, ¹⁴C dates and the analysis for heavy metals in fine sediments, which were washed into the river system during mining, indicates that there has been at least 4 m of sedimentation since the early 17th century, but only in a central belt of varying width. Metal-rich waste, identified in the fine sediments of this zone of ‘Trehelig Silts’, indicates those areas which were most heavily sedimented during the peak of metalliferous mining in the 18th and 19th centuries. Although the near-channel margins appear to be superficially similar to the older floodplain, the spatial and vertical pattern of historic sedimentation is complex, and is not reflected in marked elevation differences. The division of sedimentation periods into these three broad time-spans (Late Quaternary Terraces, Late Holocene alluviation and avulsion, and the historical metal-mining period) shows that an apparently simple planar floodplain is in reality underlain by complex sedimentation units. Floodplain construction has involved the development of inset units, in cut-offs and adjacent to migrating channels, as well as the expected contrasts between in-channel and overbank environments. This has implications both for alluvial sedimentation modelling and for the identification of high-pollution zones on the floodplain. These cannot be predicted on the basis of simple ‘in-channel’ and ‘overbank’ environments given the historically complex evolution.