潜标系统的可靠性研究

本文运用可靠性工程技术对所研究的潜标系统水下部分进行了分析研究。对有关分机多年的试验结果进行统计,得出了系统可靠度验证值。对如何提高系统可靠性作了分析。     

海洋平台结构系统可靠性分析

本文研究了对三维模型的导管架平台结构系统可靠性评估方法。在极值载荷条件下，分别以极限冲剪应力及屈曲临界应力作为管节点及杆件的极限强度，采用增量载荷法建立失效模式安全余量方程。同时研究了求取结构系统主要失效模式的自动算法及计算系统失效概率的方法。作为一个算例，运用作者开发的计算机程序，对一固定式导管架平台进行了可靠性分析，验证了本文方法对开展三维模型平台结构系统可靠性评估是可行的。     

珊瑚砂地质条件下钢板桩结构可靠性分析

在热带地区开展水运工程设计施工项目,经常会遇到珊瑚砂地质,其力学特性较为特别,强度低、易碎、黏性低,力学指标变异性较大,国内现有设计规范对珊瑚砂地质条件特殊性考虑不足,设计人员在相关设计参数选取时经常忽略采用可靠度理论进行结构安全复核。以马尔代夫机场扩建项目为案例,运用可靠度理论分析了珊瑚砂力学指标的高变异性对钢板桩结构稳定可靠度的影响。根据分析,在珊瑚砂地质条件下,按照《码头结构设计规范》（JTS167-2018）进行稳定性计算,得出的结果偏于危险,应引起结构设计人员的重视。在进行结构设计时,应同时按照《港口工程结构可靠性设计统一标准》（GB50158-2010）复核板桩结构可靠度。同时,珊瑚砂较小的黏性,在进行结构可靠度计算时可以忽略。     

基于塑性极限分析理论和神经网络响应面的结构系统可靠性分析

根据多层神经网络映射存在定理，提出了基于神经网络响应面和塑性极限分析理论的结构系统可靠性分析的新方法。数值试验表明，该方法可以快速、高质量地求出结构系统可靠性指标，是一个具有发展前景的新方法。     

海洋平台结构抗震可靠性时程分析方法

将地震运动视为随机过程,建立海洋平台结构在地震作用任一时刻基于剪切变形控制的极限状态方程,应用JC法计算海洋平台结构在地震作用任一时刻的可靠度,得到海洋平台结构抗震可靠度的时程曲线。该方法可满足工程设计的要求,便于工程应用。     

基于遗传算法的简易平台的可靠性优化设计

本文以简易独腿平台为对象,探讨遗传算法在结构系统可靠性优化设计中的应用问题.文中介绍了遗传算法的理论基础及工作过程,并将计算结果与原设计结果进行比较,验证了利用遗传算法解决此类问题的有效性,及运用结构可靠性优化方法设计简易平台的合理性.     

基于风浪联合概率模型的海洋平台结构系统可靠度分析

基于多变量极值理论的联合概率模型,根据BZ28—1油田一年多的风浪同步观测资料统计得到风浪联合概率分布及其参数,讨论了海洋平台结构系统可靠度分析的等效荷载方法,在此基础上分析了JZ20—2MUQ平台结构的系统可靠度,并与不考虑风浪相关性影响的JZ20—2MUQ平台结构的系统可靠度比较,得到了风浪相关性对系统可靠度的影响情况。     

半潜式平台结构整体可靠性分析方法

针对海洋环境中的半潜式平台多方面不确定性,基于半潜式平台结构整体强度分析方法,考虑多种波浪荷载作用的结构响应,采用非线性逐步垮塌分析方法,研究平台在不同控制工况下的极限承载力模型,建立相应的功能函数.根据结构体系可靠度理论和失效模式之间的关系,采用串联体系的可靠度计算方法.最后,对一座具体半潜式平台在100年重现期波浪荷载作用下进行了体系可靠性计算.计算结果表明平台整体可靠度水平由波浪引起的主要结构响应形式决定.通过计算,验证可靠度计算方法具有高效性和可行性,可以为大型深水浮式平台结构的设计、维护和评估提供理论依据.     

船体可靠性评估

为了研究不同结构船体的寿命和使用时可靠度的关系,提出了一种基于试验的可靠度估计方法.针对不同结构船体寿命服从Weibull分布,在无失效数据情形下、置信度至少为γ和寿命为t时,根据船体寿命试验数据,给出了可靠度的单侧置信下限.该方法是在Weibull分布形状参数下限已知的情况下,能将所有的无失效寿命数据进行累加,大大提高了可靠性分析的精度.最后,对钢结构、钛合金结构、铝合金结构的船体,在寿命为t月、置信度至少为γ时,计算了3种结构船体的可靠度单侧置信下限.结果表明该方法易于计算,便于工程应用.     

极端荷载作用下海洋导管架平台体系可靠度分析

采用非线性倒塌分析方法，考虑桩－土－结构的非线性相互作用，研究了导管架平台在极端荷载作用下承载能力的计算模型，分析了平台结构体系在极端荷载作用下的全倒塌全过程，在此基础上，结合蒙特卡洛法，提出了海洋导管架平台结构的体系可靠度计算方法。最后对工程实例－涠11－4C海洋平台的结构进行了体系可靠性分析，并对比分析了不同的荷载效应计算公式对计算经的影响，研究表明计算经满足工程设计要求，便于工程应用。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.     

INFORMATION FOR AUTHORS

<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,     

Estimation of Sediment Properties during Benthic Impact Experiments

Sediment properties, such as water content and density, have been used to estimate the dry and wet weights, as well as the volume of sediment recovered and discharged, during benthic impact experiments conducted in the Pacific and Indian Oceans. The estimates show that the weights of dry (355-1332 t) and wet sediment (1651-4888 t) recovered during the experiments, are not only a function of the total duration and distance covered during the experiment, but also depend on water content and density of the sediment. Estimation of dry sediment and its volumetric ratio in the discharge, are key parameters for calculating the discharged volume. The estimated volume of wet sediment recovered (1427-4049 m 3 ) as well as discharged (2693-6951 m 3 ) during the experiments, provide important inputs to evaluate the sediment resettlement and migration. Using these estimates, the average depth of excavation on the seafloor, can also been calculated. However, the stages of sediment recovery and discharge are expressed differently in some of the experiments. In order to standardize these, different stages have been identified, and definitions of certain terms have been suggested, for use in the future. The methods of calculating different properties, as well as weight and volume of discharged sediment are described in the paper for use in other applications concerning deep-sea discharges.