Salt tectonic controls on deep‐water turbidite depositional systems: Miocene,southwestern Lower Congo Basin,offshore Angola

Regionally extensive 3D seismic data from the Lower Congo Basin, offshore Angola, have been used to investigate the influence of salt‐related structures on the location, geometry and evolution of Miocene deep‐water depositional systems. Isochron variations and cross‐sectional lap‐out relationships have then been used to qualitatively reconstruct the syn‐depositional morphology of salt‐cored structures. Coherence and Red‐green‐blue‐blended spectral decomposition volumes, tied to cross‐sectional seismic facies, allow imaging of the main sediment transport pathways and the distribution of their component seismic facies. Major sediment transport pathways developed in an area of complex salt‐related structures comprising normal faults, isolated diapirs and elongate salt walls with intervening intraslope basins. Key structural controls on the location of the main sediment transport pathways and the local interaction between lobe‐channel‐levee systems and individual structures were the length and height of structures, the location and geometry of segment boundaries, the growth and linkage of individual structures, and the incidence angle between structural strike and flow direction. Where the regional flow direction was at a high angle to structural strike, transport pathways passed progressively through multiple intraslope basins in a fill and spill manner. Segment boundaries and structural lows between diapirs acted as spill points, focusing sediment transport between intraslope basins. Channel–lobe transitions are commonly associated with these spill points, where flows expanded and entered depocentres. Deflection of channel‐levee complexes around individual structures was mainly controlled by the length of structures and incidence angle. Where regional flow direction was at a low angle to structural strike, sediment transport pathways ran parallel to structure and were confined to individual intraslope basins for many tens of kilometres. Spill between intraslope basins was rare. The relative position of structures and their segment boundaries was fixed during the Miocene, which effectively pinned the locations where sediment spilled from one intraslope basin to the next. As a result, major sediment transport pathways were used repeatedly, giving rise to vertically stacked lobe‐channel‐levee complexes along the pathways. Shadow zones devoid of coarse clastics developed in areas that were either structurally isolated from the sediment transport pathways or bypassed as a result of channel diversion.     

Geochemical history of a Lower Miocene lake,the Cypris Formation,Sokolov Basin,Czech Republic

The intracontinental Lower Miocene Cypris paleo-lake originated during progressive subsidence in the Sokolov Basin, part of the Cenozoic Oh?e Rift, after the deposition of coal seams. The Cypris Fm. consists almost entirely of lacustrine clays with variable mineral composition and organic matter, where this succession is 70–120 m thick. The main objective of this study was to interpret the geochemical history of the Lower Miocene Cypris Fm. using high-resolution, down-core geochemical records and study of the organic matter. This work revealed that the lower part of the lacustrine sediment sequence was deposited in a freshwater lake, in an open hydrological system. An increase in the K/Zr and K/Ti ratios towards the upper part of the Cypris Fm. indicates a gradual increase in the pelitic fraction of the local sediments and/or a decline in input of volcanic material. Simultaneously, increasing Ca/K and Sr/K ratios indicate the precipitation of carbonates, predominantly dolomite and siderite. In the upper part of the Cypris Fm., there is a significant increase in Na/K, Na/Zr, and Na/Ti ratios, suggesting increasing salinity (alkalinity) of the paleoenvironment in a closed hydrological system. Reaction between the Na-rich water and clastic components of the sediment in an alkaline medium gave rise to the formation of zeolites, mixed-layer clay minerals and smectite. Abundant remains of aquatic organisms, especially algae, increased with greater salinity in the upper part of the Cypris Fm. This is reflected in the greater hydrogen index (HI_{Rock Eval}), and the growing proportion of liptinite group macerals of aquatic origin in the bulk organic matter. During the entire history of sedimentation in the Miocene lake, repetitive changes in the sediment geochemistry occurred at both micro- and macroscales, and fluctuations of K/Ti, K/Zr, and Sr/Ca ratios over meters to tens of meters are observed. These changes probably reflect either long-term climate fluctuations during the Lower Miocene or oscillations caused by changes in the rate of subsidence of the basin floor. Variations in the elemental composition of sediments can be used to correlate individual boreholes across the entire sedimentary basin.     

Late Miocene – Recent exhumation of the central Himalaya and recycling in the foreland basin assessed by apatite fission-track thermochronology of Siwalik sediments, Nepal

Thermochronological analysis of detrital sediments derived from the erosion of mountain belts and contained in the sedimentary basins surrounding them allows reconstructing the long-term exhumation history of the sediment source areas. The effective closure temperature of the thermochronological system analysed determines the spatial and temporal resolution of the analysis through the duration of the lag time between closure of the system during exhumation and its deposition in the sedimentary basin. Here, we report apatite fission-track (AFT) data from 31 detrital samples collected from Miocene to Pliocene stratigraphic sections of the Siwalik Group in western and central Nepal, as well as three samples from modern river sediments from the same area, that complement detrital zircon fission-track (ZFT) and U–Pb data from the same samples presented in a companion paper. Samples from the upper part of the stratigraphic sections are unreset and retain a signal of source-area exhumation; they show spatial variations in source-area exhumation rates that are not picked up by the higher-temperature systems. More deeply buried samples have been partially reset within the Siwalik basin and provide constraints on the thermal and kinematic history of the fold-and-thrust belt itself. The results suggest that peak source-area exhumation rates have been constant at ∼1.8 km Myr⁻¹ over the last ∼7 Ma in central Nepal, whereas they ranged between 1 and ∼1.5 km Myr⁻¹ in western Nepal over the same time interval; these spatial variations may be explained by either a tectonic or climatic control on exhumation rates, or possibly a combination of the two. Increasing lag times within the uppermost part of the sections suggest an increasing component of apatites that have been recycled within the Siwalik belt and are corroborated by AFT ages of modern river sediment downstream as well as the record of the distal Bengal Fan. The most deeply buried and most strongly annealed samples record onset of exhumation of the frontal Siwaliks along the Himalayan frontal thrust at ∼2 Ma and continuous shortening at rates comparable with the present-day shortening rates from at least 0.3 Ma onward.     

The Backus–Gilbert approach to the 3-D structure in the upper mantle – II. SH and SV velocity

Summary. Phase velocity variations obtained in the previous paper are inverted by the Backus–Gilbert method for the velocity structure of the upper mantle. Spheroidal modes and toroidal modes in the period range of 125–260 s are used in the inversion. The data cannot constrain all six parameters in a transversely isotropic medium and we chose to perturb only two parameters, SH and SV velocities. SV velocities are resolved between the depths of about 200 and 400 km and SH velocities between 0 and 200 km. Resolution kernels have half-peak widths of about 200–300 km in depth, becoming broader for deeper target depths. SV velocity kernels show secondary peaks near the surface of the Earth, with widths varying from 50 to 100 km. The deeper the target depths, the wider the secondary peaks near the surface. SH velocity kernels do not possess such secondary peaks. The trade-off between SV and SH velocities is small. SV velocity is essentially determined by spheroidal modes and SH velocity by toroidal modes. Because of the broad width of the resolution kernels, the structure in the resolved region is difficult to detect from our data set; for example the differences in SV velocity structure between 250 and 350 km or the differences in SH velocity between 100 and 200 km are difficult to distinguish. Considering the horizontal resolution of about 2000 km, obtained in the previous paper, averaging kernels for 3-D structure are quite elongated in the horizontal dimension.     

Late Miocene to Pliocene stratigraphy of the Kura Basin,a subbasin of the South Caspian Basin: implications for the diachroneity of stage boundaries

Relative ages of late Cenozoic stratigraphy throughout the Caspian region are referenced to regional stages that are defined by changes in microfauna and associated extreme (>1000 m) variations in Caspian base level. However, the absolute ages of these stage boundaries may be significantly diachronous because many are based on the first occurrence of either transgressive or regressive facies, the temporal occurrence of which should depend on position within a basin. Here, we estimate the degree of diachroneity along the Akchagyl regional stage boundary within the Caspian basin system by presenting two late Miocene‐Pliocene aged measured sections, Sarica and Vashlovani, separated by 50 km and exposed within the Kura fold‐thrust belt in the interior of the Kura Basin. The Kura Basin is a western subbasin of the South Caspian Basin and the sections presented here are located >250 km from the modern Caspian coast. New U‐Pb detrital zircon ages from the Sarica section constrain the maximum depositional age for Productive Series strata, a lithostratigraphic package considered correlative with the 2–3 Myr‐long regional Eoakchagylian or Kimmerian stage that corresponds to a period of extremely low (>500 m below the modern level) Caspian base level. This new maximum depositional age from the Productive Series at Sarica of 2.5 ± 0.2 Ma indicates that the regionally extensive Akchagyl transgression, which ended the deposition of the Productive Series near the Caspian coast at 3.2 Ma, may have appeared a minimum of 0.5 Myr later in the northern interior of the Kura Basin than at the modern Caspian Sea coast. The results of this work have important implications for the tectonic and stratigraphic history of the region, suggesting that the initiation of the Plio‐Pleistocene Kura fold‐thrust belt may have not been as diachronous along strike as previously hypothesized. More generally, these results also provide a measure of the magnitude of diachroneity possible along sequence boundaries, particularly in isolated basins. Comparison of accumulation rates between units in the interior of the Kura subbasin and the South Caspian main basin suggest that extremely large variations in these rates within low‐stand deposits may be important in identifying the presence of subbasins in older stratigraphic packages.     

The recent history of hydro-geomorphological processes in the upper Hangbu river system, Anhui Province, China

This paper describes 20th century climate and human impacts on terrestrial and fluvial systems in the Dabie Mountains, Anhui Province, China, based on analyses of four types of information. Analyses of particle size, mineral magnetism, organic carbon, nitrogen and phosphorus in a sediment core taken from the Longhekou reservoir, built in 1958 AD in the upper reaches of Hangbu River, provide an  45 year record of fluvial responses, while monitored meteorological and hydrological data provide records of climate and river discharge. Census data compiled for the local Shucheng County provide records of population and land use, complemented with analyses of satellite images. The Xiaotian river delivers over 65% of the total water and silt to the reservoir. Analyses indicate that the fluvial regime tracks the monsoon climate over seasonal timescales, but human activities have a strongly mediating effect on sediment supply, sediment delivery and, to a lesser extent, runoff over longer timescales. Notable periods of human impact on erosion include the Great Leap Forward (1958–1960) and Great Cultural Revolution (1966–1976). A rising trend in precipitation and new land use changes at the present time may be leading to an enhanced flood risk.     

Oligocene to middle Miocene basin development in the Eastern Betic Cordilleras, SE Spain (Vélez Rubio Corridor – Espuña): reflections of West Mediterranean plate-tectonic reorganizations

The suture between two West Mediterranean crustal blocks once situated several hundreds of kilometres apart can be studied in the Vélez Rubio Corridor – Espuña area of the Eastern Betic Cordilleras. This suture, or Internal–External Zone Boundary, separates the former passive southern margin of Iberia (the External Zone) from a stack of allochthonous nappe complexes (the Internal Zone), of which the highest unit is formed by the weakly or nonmetamorphosed Malaguide Complex. Analysis of the Oligocene to middle Miocene sediments of the Vélez Rubio Corridor and the Espuña, and comparison with coeval deposits elsewhere in the Western Mediterranean shows that (a) up to the middle Miocene, the southern part of the External Zone (Southern Subbetic) was positioned some 100 km more eastward; (b) up to the early Aquitanian, the Malaguide Complex, forming part of the South Sardinian block (the southern section of a West Mediterranean continental segment) was juxtaposed to the North Sardinian block (the northern part of that continental fragment), some 400 km more eastward; (c) West European extensional rifting during the late Oligocene to earliest Aquitanian resulted in deposition of rift valley sediments (Ciudad Granada and Pliego Formations) in the Malaguide realm; (d) during the Aquitanian, the West Mediterranean segment disintegrated and the West Mediterranean oceanic basins opened, resulting in, for example, the south-westward drift of the Internal Zone, with concomitant thrusting and thinning and deposition of submarine fans (Solana-Algeciras Formation) along the margin; (e) in the early Burdigalian, the allochthonous Internal Zone collided with the Iberian margin, causing the disruption of the platform-slope configuration of the External Zone; (f) after the collision a deep basin was formed upon the suture filled in with erosional products from both Internal and External Zones (Espejos–Viñuelas–Millanas Formations); (g) a strong compressive event in the late Burdigalian caused the southward thrusting of the Subbetic over the Espejos Formation, thus double-sealing the collisional contact; (h) in the latest Burdigalian to Langhian, new strongly subsiding basins were formed in the Western Mediterranean, e.g. along the Internal–External Zone Boundary; (i) dextral strike-slip faulting in the Serravallian resulted in a westward displacement of over 100 km of the southern Subbetic plus Internal Zone; (j) onset of a new pattern of strike-slip faulting induced the formation of a new suite of basins in the Tortonian.     

Basin evolution of Upper Cretaceous–Lower Cenozoic strata in the Malargüe fold‐and‐thrust belt: northern Neuquén Basin,Argentina

The Andean Orogen is the type‐example of an active Cordilleran style margin with a long‐lived retroarc fold‐and‐thrust belt and foreland basin. Timing of initial shortening and foreland basin development in Argentina is diachronous along‐strike, with ages varying by 20–30 Myr. The Neuquén Basin (32°S to 40°S) contains a thick sedimentary sequence ranging in age from late Triassic to Cenozoic, which preserves a record of rift, back arc and foreland basin environments. As much of the primary evidence for initial uplift has been overprinted or covered by younger shortening and volcanic activity, basin strata provide the most complete record of early mountain building. Detailed sedimentology and new maximum depositional ages obtained from detrital zircon U–Pb analyses from the Malargüe fold‐and‐thrust belt (35°S) record a facies change between the marine evaporites of the Huitrín Formation (ca. 122 Ma) and the fluvial sandstones and conglomerates of the Diamante Formation (ca. 95 Ma). A 25–30 Myr unconformity between the Huitrín and Diamante formations represents the transition from post‐rift thermal subsidence to forebulge erosion during initial flexural loading related to crustal shortening and uplift along the magmatic arc to the west by at least 97 ± 2 Ma. This change in basin style is not marked by any significant difference in provenance and detrital zircon signature. A distinct change in detrital zircons, sandstone composition and palaeocurrent direction from west‐directed to east‐directed occurs instead in the middle Diamante Formation and may reflect the Late Cretaceous transition from forebulge derived sediment in the distal foredeep to proximal foredeep material derived from the thrust belt to the west. This change in palaeoflow represents the migration of the forebulge, and therefore, of the foreland basin system between 80 and 90 Ma in the Malargüe area.     

Significance of the clay mineral distribution in fluvial sediments of the Neogene to Recent Himalayan Foreland Basin (west‐central Nepal)

Clay mineral assemblages of the Neogene Himalayan foreland basin are studied to decipher their significance with respect to tectonic and climate processes. Fluvial deposits of the Siwalik Group (west‐central Nepal), and sediment of the Ganga River drainage system were analysed for clay mineralogy. The observed clay mineral assemblages are mainly composed of illite (dominant), chlorite, smectite and kaolinite. Illite and chlorite are chiefly of detrital origin, derived from Himalayan sources. Kaolinite and smectite are authigenic, and mainly developed within pore space and as coating of detrital particles. With increasing burial, diagenetic processes affected the original clay mineral signature. Illitisation of smectite and kaolinite occurred below 2500 and 3500 m depth, respectively. Therefore, illite in the lower parts of the Siwalik Group consists of a mixture of inherited illite and illitised smectite and kaolinite, as suggested by illite crystallinity. Detrital grains that make up the framework of the Siwalik Group sandstones mainly consist of quartz, feldspar and lithic fragments, which are principally of sedimentary and metamorphic origin. Lithoclast content increases over time at the expense of quartz and K‐feldspar in response to uplift and erosion of the Lesser Himalaya Series since about 11–10 Ma. Despite mainly felsic source rocks, dominantly physical erosion processes in the Himalayan belt, and high‐energy fluvial depositional systems, smectite is abundant in the <7 Ma Siwalik Group deposits. Analyses of the Siwalik deposits and comparison with the clay mineralogy of the modern drainage system suggest that smectite preferentially formed in floodplains and intermontane valleys during early diagenesis because of downward percolating fluids rich in cations from weathering and soil development. In general, increasing seasonality and aridity linked to variability of the Asian monsoon from about 8 Ma enhanced clay mineral formation and development of authigenic smectite in paleo‐plains on the southern side of the Himalaya.     

Mid Campanian‐Lower Maastrichtian magnetostratigraphy of the James Ross Basin,Antarctica: Chronostratigraphical implications

The James Ross Basin, in the northern Antarctic Peninsula, exposes which is probably the world thickest and most complete Late Cretaceous sedimentary succession of southern high latitudes. Despite its very good exposures and varied and abundant fossil fauna, precise chronological determination of its infill is still lacking. We report results from a magnetostratigraphic study on shelfal sedimentary rocks of the Marambio Group, southeastern James Ross Basin, Antarctica. The succession studied covers a ~1,200 m‐thick stratigraphic interval within the Hamilton Point, Sanctuary Cliffs and Karlsen Cliffs Members of the Snow Hill Island Formation, the Haslum Crag Formation, and the lower López de Bertodano Formation. The basic chronological reference framework is given by ammonite assemblages, which indicate a Late Campanian – Early Maastrichtian age for the studied units. Magnetostratigraphic samples were obtained from five partial sections located on James Ross and Snow Hill islands, the results from which agree partially with this previous biostratigraphical framework. Seven geomagnetic polarity reversals are identified in this work, allowing to identify the Chron C32/C33 boundary in Ammonite Assemblage 8‐1, confirming the Late Campanian age of the Hamilton Point Member. However, the identification of the Chron C32/C31 boundary in Ammonite Assemblage 8‐2 assigns the base of the Sanctuary Cliffs Member to the early Maastrichtian, which differs from the Late Campanian age previously assigned by ammonite biostratigraphy. This magnetostratigraphy spans ~14 Ma of sedimentary succession and together with previous partial magnetostratigraphies on Early‐Mid Campanian and Middle Maastrichtian to Danian columns permits a complete and continuous record of the Late Cretaceous distal deposits of the James Ross Basin. This provides the required chronological resolution to solve the intra‐basin and global correlation problems of the Late Cretaceous in the Southern Hemisphere in general and in the Weddellian province in particular, given by endemism and diachronic extinctions on invertebrate fossils, including ammonites. The new chronostratigraphic scheme allowed us to calculate sediment accumulation rates for almost the entire Late Cretaceous infill of the distal James Ross Basin (the Marambio Group), showing a monotonous accumulation for more than 8 Myr during the upper Campanian and a dramatic increase during the early Maastrichtian, controlled by tectonic and/or eustatic causes.     

评《长江流域经济发展和上、中、下游比较研究》

长江流域经济历来在我国经济发展中占有十分重要的地位。早在80年代中期,在《全国国土规划纲要》中就将长江沿江地区与沿海地区共同形成的"T"型主轴线作为我国经济建设的主轴线。     

The Backus–Gilbert approach to the three-dimensional structure in the upper mantle – I. Lateral variation of surface wave phase velocity with its error and resolution

Summary. The Backus–Gilbert method is applied to obtain the phase velocity variations on a sphere from the measured phase velocity. Narrow peak kernels, with radii of about 2000 km, are obtained for almost everywhere on the sphere. The phase velocity results are thus interpreted as an average within such regions. The most trouble comes from the antipodal peak in the resolution kernel. This is evaluated as contamination and is incorporated in the error estimation. The total error, which is a root mean square of contamination from the antipodal peak and statistical error estimated from the data covariance matrix, is about 1 per cent of the phase velocity in the average earth model, which is the Preliminary Reference Earth Model (PREM). However, there is about a factor of 2 variation of errors on the sphere. Maximum variations of phase velocity are about 3–4 per cent of the phase velocity in the average earth model, and thus there still remain anomalies which exceed estimated errors. The estimated errors correspond to one standard deviation under the assumptions of uncorrelated Gaussian distribution. For high confidence interval, they show that statistically significant anomalies are scarce for the current data set. Generally, Love-wave phase velocity maps show more resolved features than Rayleigh-wave maps and we can see, in high confidence maps, fast velocities in old oceans and old continents and slow velocities in tectonically active regions like the East Pacific Rise and various back-arc regions.     

Oligocene to early Miocene tectono-sedimentary history of the Alicante region (SE Spain): implications for Western Mediterranean evolution

The Alicante region, situated at the intersection of major Western Mediterranean structural units, is unique in possessing a complete marine Oligocene to early Miocene record of both platform and slope deposits. Detailed analysis of three selected platform areas in the north of the region, each showing a different tectono-sedimentary history, and comparison with coeval slope deposits in the south of the region shows that: (a) during the Rupelian to early Chattian the region formed part of the Iberian microplate and can be considered the south-eastern continuation of the NW-SE-trending Iberian Chain (folding phase between 36 and 33 Ma, updoming event at 31–29 Ma, both induced by Pyrenean collision); (b) during the late Chattian to Aquitanian it was linked to the extensional, SW-NE-orientated Valencia Trough forming part of its western margin (rifting phases at 28 and 25 Ma); (c) from the Aquitanian-Burdigalian boundary (20 Ma) onward, the region underwent NW-directed compression due to Betic collision (folding phases at 20 and 17 Ma); (d) a foreland basin formed in the late Burdigalian (18–17 Ma), continuous from the Betic Cordilleras over the Alicante region to the Balearics; (e) a purely compressive regime was superseded by strike-slip tectonics at the Langhian—Serravallian boundary. The previously formulated hypotheses of coeval compression and extension with inferred hypothetical strike-slip or other faults in or near the Alicante region is rejected on the basis that compress ional and extensional tectonics are separated in time in the Alicante region.     

Miocene to Recent exhumation of the central Himalaya determined from combined detrital zircon fission-track and U/Pb analysis of Siwalik sediments, western Nepal

Fission‐track (FT) analysis of detrital zircon from synorogenic sediment is a well‐established tool to examine the cooling and exhumation history of convergent mountain belts, but has so far not been used to determine the long‐term evolution of the central Himalaya. This study presents FT analysis of detrital zircon from 22 sandstone and modern sediment samples that were collected along three stratigraphic sections within the Miocene to Pliocene Siwalik Group, and from modern rivers, in western and central Nepal. The results provide evidence for widespread cooling in the Nepalese Himalaya at about 16.0±1.4 Ma, and continuous exhumation at a rate of about 1.4±0.2 km Myr^?1 thereafter. The ～16 Ma cooling is likely related to a combination of tectonic and erosional activity, including movement on the Main Central thrust and Southern Tibetan Detachment system, as well as emplacement of the Ramgarh thrust on Lesser Himalayan sedimentary and meta‐sedimentary units. The continuous exhumation signal following the ～16 Ma cooling event is seen in connection with ongoing tectonic uplift, river incision and erosion of lower Lesser Himalayan rocks exposed below the MCT and Higher Himalayan rocks in the hanging wall of the MCT, controlled by orographic precipitation and crustal extrusion. Provenance analysis, to distinguish between Higher Himalayan and Lesser Himalayan zircon sources, is based on double dating of individual zircons with the FT and U/Pb methods. Zircons with pre‐Himalayan FT cooling ages may be derived from either nonmetamorphic parts of the Tethyan sedimentary succession or Higher Himalayan protolith that formerly covered the Dadeldhura and Ramgarh thrust sheets, but that have been removed by erosion. Both the Higher and Lesser Himalaya appear to be sources for the zircons that record either ～16 Ma cooling or the continuous exhumation afterwards.