Frictional and viscous effects on the nucleation phase of an earthquake

We study the frictional and viscous effects on earthquake nucleation, especially for the nucleation phase, based on a one-degree-of-freedom spring-slider model with friction and viscosity. The frictional and viscous effects are specified by the characteristic displacement, U _c, and viscosity coefficient, η, respectively. Simulation results show that friction and viscosity can both lengthen the natural period of the system and viscosity increases the duration time of motion of the slider. Higher viscosity causes a smaller amplitude of lower velocity motion than lower viscosity. A change of either U _c (under large η) or η (under large U _c) from a large value (U _ch for U _c and η _h for η) to a small one (U _cl for U _c and η _l for η) in two stages during sliding can result in a clear nucleation phase prior to the P-wave. The differences δU _c = U _ch ? U _cl and δη = η _h ? η _l are two important factors in producing a nucleation phase. The difference between the nucleation phase and the P-wave increases with either δU _c or δη. Like seismic observations, the peak amplitude of P-wave, which is associated with the earthquake magnitude, is independent upon the duration time of nucleation phase. A mechanism specified with a change of either η or U _c from a larger value to a smaller one due to temporal variations in pore fluid pressure and temperature in the fault zone based on radiation efficiency is proposed to explain the simulation results and observations.     

Stability analyses and numerical simulations of the single degree of freedom spring-slider system obeying the revised rate- and state-dependent friction law

The linear and nonlinear stabilities of the single degree of freedom spring-slider system which accords to the revised rate- and state-dependent friction law (RSF) (Nagata et al. J Geophys Res 117 (B2):B2314, 2012) are analyzed. The revised ageing law obtained by Nagata et al. (J Geophys Res 117 (B2):B2314, 2012) incorporates the effects of changes in shear stress. Numerical simulations on the cyclic stick–slip motions of the system are developed and compared with the results of the systems according to the original ageing law or the slip law. From the insight of the stability analyses and numerical simulations, it is found that the revised ageing law integrates the “healing effect” feature of the original ageing law and the dynamic slip features of the slip law. In the stick–slip cycles, the velocity decreases with non-constant states during the dynamic overshoot for the revised ageing law, which is different from both the original ageing law and the slip law. Although the revised ageing law concluded from the low velocity friction experiments cannot account for the earthquake-like high velocity friction experiments, it can be used in earthquake nucleation with low velocity. The stability analyses and the results of numerical simulations are helpful to understanding the implications of the revised ageing law.     

A way of estimating the characteristic slip displacement

During the ruptures of an earthquake,the strain energy.△E,.will be transferred into,at least,three parts,i.e..the seismic radiation energy(E_s),fracture energy(E_g),and frictional energy(E_f),that is,△E = E_s + E_g + E_f.Friction,which is represented by a velocity- and state-dependent friction law by some researchers,controls the three parts.One of the main parameters of the law is the characteristic slip displacement.D_c.It is significant and necessary to evaluate the reliable value of D_c from observed and inverted seismic data.Since D_c controls the radiation efficiency.η_R = E_s/(E_s+ E_g),the value of η_r is a good constraint of estimating D_c.Integrating observed data and inverted results of source parameters from recorded seismograms.the values of E_s and E_g of an earthquake can be measured,thus leading to the value of η_R.The constraint used to estimate the reliable value of D_c will be described in this work.An example of estimates of D_c.based on the observed and inverted values of source parameters of the September 20,1999 M_S 7.6 Chi-Chi(Ji-Ji).Taiwan region,earthquake will be presented.     

The coda attenuation of the Yao’an area in Yunnan Province

An earthquake withM=6.5 happened on January 15, 2000 in Yao’an of Yunnan Province. After the earthquake, a temporary digital network with 6 detectors around the epicenter area was set up. 402 aftershocks were located more precisely. According to coda short recording observed, the coda averaging quality factor has been acquired via Sato’s single scattering model analyses,Q _c(f)=49f ^0.95,f=1.5～20.0 Hz, which has the attenuation characteristics of high structural active region.     

<Emphasis Type="Italic">Q</Emphasis><Subscript>c</Subscript> and <Emphasis Type="Italic">Q</Emphasis><Subscript>S</Subscript> wave attenuation of South African earthquakes

Quality factor Q, which describes the attenuation of seismic waves with distance, was determined for South Africa using data recorded by the South African National Seismograph Network. Because of an objective paucity of seismicity in South Africa and modernisation of the seismograph network only in 2007, I carried out a coda wave decay analysis on only 13 tectonic earthquakes and 7 mine-related events for the magnitude range 3.6?≤?M _L ?≤?4.4. Up to five seismograph stations were utilised to determine Q _c for frequencies at 2, 4, 8 and 16 Hz resulting in 84 individual measurements. The constants Q ₀ and α were determined for the attenuation relation Q _c(f)?=?Q ₀ f ^α . The result was Q ₀?=?396?±?29 and α?=?0.72?±?0.04 for a lapse time of 1.9*(t _s???t ₀) (time from origin time t ₀ to the start of coda analysis window is 1.9 times the S-travel time, t _s) and a coda window length of 80 s. This lapse time and coda window length were found to fit the most individual frequencies for a signal-to-noise ratio of at least 3 and a minimum absolute correlation coefficient for the envelope of 0.5. For a positive correlation coefficient, the envelope amplitude increases with time and Q _c was not calculated. The derived Q _c was verified using the spectral ratio method on a smaller data set consisting of nine earthquakes and one mine-related event recorded by up to four seismograph stations. Since the spectral ratio method requires absolute amplitudes in its calculations, site response tests were performed to select four appropriate stations without soil amplification and/or signal distortion. The result obtained for Q _S was Q ₀?=?391?±?130 and α?=?0.60?±?0.16, which agrees well with the coda Q _c result.     

Scaling Analysis of Time Distribution between Successive Earthquakes in Aftershock Sequences

The earthquake inter-event time distribution is studied, using catalogs for different recent aftershock sequences. For aftershock sequences following the Modified Omori’s Formula (MOF) it seems clear that the inter-event distribution is a power law. The parameters of this law are defined and they prove to be higher than the calculated value (2–1/p). Based on the analysis of the catalogs, it is determined that the probability densities of the inter-event time distribution collapse into a single master curve when the data is rescaled with instantaneous intensity, R(t; M _th ), defined by MOF. The curve is approximated by a gamma distribution. The collapse of the data provides a clear view of aftershock-occurrence self-similarity.     

Limits of transversely isotropic elastic parameters for the existence of classical Rayleigh waves

Solutions of P-SV equations of motion in a homogeneous transversely isotropic elastic layer contain a factor exp(±ν _j z), where z is the vertical coordinate and j?=?1, 2. For computing Rayleigh wave dispersion in a multi-layered half space, ν _j is computed at each layer. For a given phase velocity (c), ν _j becomes complex depending on the transversely isotropic parameters. When ν _j is complex, classical Rayleigh waves do not exist and generalised Rayleigh waves propagate along a path inclined to the interface. We use transversely isotropic parameters as α _H , β _V , ξ, ? and η and find their limits beyond which ν _j becomes complex. It is seen that ν _j depends on ? and η, but does not depend on ξ. The complex ν _j occurs when ? is small and η is large. For a given c/β _V , the region of complex ν _j in a ? -η plane increases with the increase of α _H /β _V . Further, for a given α _H /β _V , the complex region of ν _j increases significantly with the decrease of c/β _V . This study is useful to compute dispersion parameters of Rayleigh waves in a layered medium.     

Effect of tidal stress on fault nucleation and failure of the 2007 Ms6.4 Ning’er earthquake

Based on calculations of the tidal Coulomb failure stress and investigations of the correlation between the Earth tide and the Ning’er earthquake sequence, the processes of fault nucleation and failure were simulated. In these simulations we consider the influence of tidal stresses using the rate- and state-dependent friction laws. Furthermore, the effects on tidal triggering due to the stress amplitude and periodic oscillation properties were investigated, and the triggering effects between the tidal normal and tidal shear stresses were compared. The results showed that the Ning’er earthquake sequence was a physical consequence of tidal effects. A transition period T₀ exists between the nucleation and failure processes of a seismic fault. When the period T of stress is equal to or becomes larger than T₀, the fault response becomes dependent on the periodic features of the loading stress; however, for T < T₀, the response of the fault is nearly independent of the period. Both the tidal normal and tidal shear stresses have similar effect in the nucleation and failure processes; the clock changes generally increase with the maximum amplitudes of the tidal stresses. Tidal normal and tidal shear stresses with positive amplitudes mainly induce earthquake triggering; however, the triggering effects induced by negative tidal stresses are smaller and faults are not sensitive to negative tidal stresses. Our results primarily reveal the physical mechanisms of tidal stress triggering.     

Study on seismic performance enhancement in bridges based on factorial analysis

The seismic performance of bridges depends on the ductile behavior of its column, as the deck and other substructural components except pile foundations are normally designed to be elastic to facilitate bridge retrofitting.Codes such as AASHTO, Caltrans, IRC: 112 etc.give guidelines for the seismic performance enhancement of columns through ductile detailing.In the present study, a methodology for the seismic performance enhancement of bridges is discussed by using a "Parameter-Based Influence Factor"(PIF) developed from factorial analysis.The parameters considered in the factorial analysis are: percentage of longitudinal reinforcement(P_t), compressive strength of concrete(f'_c), yield strength of steel(f_y), spacing of lateral ties(S) and column height(H).The influence of each parameter and their combination on the limit states considered is estimated.Pushover analysis is used to evaluate the capacity of columns, considering shear failure criteria.A total of 243(3~5 combinations) analysis results are compiled to develop ‘PIF’ used in the performance enhancement process.The study also encompasses other sub-objectives such as evaluating the discrepancies in using the Importance Factor(I) in designing bridges of varied functional importance; and estimating the aspect ratio and slenderness ratio values of bridge columns for its initial sizing.     

Quantitative Analysis of Seismicity Before Large Taiwanese Earthquakes Using the G-R Law

Seismicity has been identified as an example of a natural, nonlinear system for which the distribution of frequency and event size follow a power law called the “Gutenberg–Richter (G-R) law.” The parameters of the G-R law, namely b- and a-values, have been widely used in many studies about seismic hazards, earthquake forecasting models, and other related topics. However, the plausibility of the power law model and applicability of parameters were mainly verified by statistical error σ of the b-value, the effectiveness of which is still doubtful. In this research, we used a newly defined p value developed by Clausetet al. (Power-Law Distributions in Empirical Data, SIAM Rev. 51, 661–703, 2009) instead of the statistical error σ of the b-value and verified its effectiveness as a plausibility index of the power-law model. Furthermore, we also verified the effectiveness of K–S statistics as a goodness-of-fit test in estimating the crucial parameter \(M_{\text{c}}\) of the power-law model.     

Some Probabilistic and Statistical Properties of the Seismic Regime of Zemmouri (Algeria) Seismoactive Zone

Statistical tests have been used to adjust the Zemmouri seismic data using a distribution function. The Pareto law has been used and the probabilities of various expected earthquakes were computed. A mathematical expression giving the quantiles was established. The extreme values limiting law confirmed the accuracy of the adjustment method. Using the moment magnitude scale, a probabilistic model was made to predict the occurrences of strong earthquakes. The seismic structure has been characterized by the slope of the recurrence plot γ, fractal dimension D, concentration parameter K_sr, Hurst exponents H_r and H_t. The values of D, γ, K_sr, H_r, and H_t diminished many months before the principal seismic shock (M = 6.9) of the studied seismoactive zone has occurred. Three stages of the deformation of the geophysical medium are manifested in the variation of the coefficient G% of the clustering of minor seismic events.     

Creepex of Kamchatka shallow earthquakes

Results of investigation of the lithosphere in the Kamchatka seismic focal zone from dynamic characteristics of earthquake records obtained at regional stations are presented. It is assumed that the specificity of the source zone can be estimated by the relation Cr = K _P ? bK _S ? c characterizing relative energies (energy classes, according to [Fedotov, 1972]) of short period transverse and longitudinal waves in the source. Azimuthal, spatial, and temporal variations in Cr and their relation to focal mechanisms are examined. Spatiotemporal variations in this parameter are shown to be caused by the influence of variations in the conditions in the source zone (its substance or process) on the radiation of P and S waves.     

Visibility Graph Analysis of the 2003–2012 Earthquake Sequence in the Kachchh Region of Western India

A visibility graph (VG) is a rather novel statistical method in earthquake sequence analysis; it maps a time series into networks or graphs, converting dynamical properties of the time series into topological properties of networks. By using the VG approach, we defined the parameter window mean interval connectivity time <T_c>, that informs about the mean linkage time between earthquakes. We analysed the time variation of <T_c> in the aftershock-depleted catalogue of Kachchh Gujarat (Western India) seismicity from 2003 to 2012, and we found that <T_c>: i) changes through time, indicating that the topological properties of the earthquake network are not stationary; and, ii) appeared to significantly decrease before the largest shock (M5.7) that occurred on March 7, 2006 near the Gedi fault, an active fault in the Kachchh region.     

Thermoremanent and chemical magnetization of exsolution products of nanosized titanomagnetites

Based on the theory of two-phase interacting nanoparticles, the formation of thermoremanent and chemical remanent magnetization in nanosized titanomagnetites is modeled. It is shown that the value of thermoremanent magnetization barely depends on the degree of titanomagnetite exsolution whereas, chemical remanent magnetization which emerges during the exsolution increases up to at most the value of thermoremanent magnetization. The values of the ratio of thermoremanent to ideal magnetization, R _t , fall within the limits 0.8 ≤ R _t ≤ 1. The analogous ratio of chemical remanent magnetization to the ideal R _c are below R _t at all stages of the exsolution. Besides, the magnetic interaction between the nanoparticles reduces the values of thermoremanent and chemical magnetization but barely affects the ratio.     

A new <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> estimation parameter for use in earthquake early warning systems

We propose a method that employs the squared displacement integral (ID2) to estimate earthquake magnitudes in real time for use in earthquake early warning (EEW) systems. Moreover, using τ _c and P _d for comparison, we establish formulas for estimating the moment magnitudes of these three parameters based on the selected aftershocks (4.0 ≤ M _s  ≤ 6.5) of the 2008 Wenchuan earthquake. In this comparison, the proposed ID2 method displays the highest accuracy. Furthermore, we investigate the applicability of the initial parameters to large earthquakes by estimating the magnitude of the Wenchuan M _s 8.0 mainshock using a 3-s time window. Although these three parameters all display problems with saturation, the proposed ID2 parameter is relatively accurate. The evolutionary estimation of ID2 as a function of the time window shows that the estimation equation established with ID2 ^Ref determined from the first 8-s of P wave data can be directly applicable to predicate the magnitudes of 8.0. Therefore, the proposed ID2 parameter provides a robust estimator of earthquake moment magnitudes and can be used for EEW purposes.     

Experimental study on the shear behavior of the interface between cushion materials and the concrete raft

Cushion is a layer of granular materials between the raft and the ground. The shear behavior of the interface between the cushion and the raft may influence the seismic performance of the superstructure. In order to quantify such influences, horizontal shear tests on the interfaces between different cushion materials and concrete raft under monotonic and cyclic loading were carried out. The vertical pressure P_v, material type and cushion thickness h_c were taken as variables. Conclusions include: 1) under monotonic loading, P_v is the most significant factor; the shear resistance P_(hmax) increases as P_v increases, but the normalized factor of resistance μ_n has an opposite tendency; 2) for the materials used in this study, μ_n varies from 0.40 to 0.70, the interface friction angle δ_s varies from 20° to 35°, while u_(max) varies from 3 mm to 15 mm; 3) under cyclic loading, the interface behavior can be abstracted as a "three-segment" back-bone curve, the main parameters include μ_n, the displacement u_1 and stiffness K_1 of the elastic stage, the displacement u_2 and stiffness K_2 of the plastic stage; 4) by observation and statistical analysis, the significance of different factors, together with values of K_1, K_2 and μ_n have been obtained.     

The maximum expected earthquake magnitudes in different future time intervals of six seismotectonic zones of Iran and its surroundings

One of the crucial components in seismic hazard analysis is the estimation of the maximum earthquake magnitude and associated uncertainty. In the present study, the uncertainty related to the maximum expected magnitude μ is determined in terms of confidence intervals for an imposed level of confidence. Previous work by Salamat et al. (Pure Appl Geophys 174:763-777, 2017) shows the divergence of the confidence interval of the maximum possible magnitude m_max for high levels of confidence in six seismotectonic zones of Iran. In this work, the maximum expected earthquake magnitude μ is calculated in a predefined finite time interval and imposed level of confidence. For this, we use a conceptual model based on a doubly truncated Gutenberg-Richter law for magnitudes with constant b-value and calculate the posterior distribution of μ for the time interval T_f in future. We assume a stationary Poisson process in time and a Gutenberg-Richter relation for magnitudes. The upper bound of the magnitude confidence interval is calculated for different time intervals of 30, 50, and 100 years and imposed levels of confidence α?=?0.5, 0.1, 0.05, and 0.01. The posterior distribution of waiting times T_f to the next earthquake with a given magnitude equal to 6.5, 7.0, and 7.5 are calculated in each zone. In order to find the influence of declustering, we use the original and declustered version of the catalog. The earthquake catalog of the territory of Iran and surroundings are subdivided into six seismotectonic zones Alborz, Azerbaijan, Central Iran, Zagros, Kopet Dagh, and Makran. We assume the maximum possible magnitude m_max?=?8.5 and calculate the upper bound of the confidence interval of μ in each zone. The results indicate that for short time intervals equal to 30 and 50 years and imposed levels of confidence 1???α?=?0.95 and 0.90, the probability distribution of μ is around μ?=?7.16???8.23 in all seismic zones.     

Shape and position of Earth’s bow shock near-lunar orbit based on ARTEMIS data

Earth’s bow shock is the result of interaction between the supersonic solar wind and Earth’s magnetopause. However, data limitations mean the model of the shape and position of the bow shock are based largely on near-Earth satellite data. The model of the bow shock in the distant magnetotail and other factors that affect the bow shock, such as the interplanetary magnetic field (IMF) B_y, remain unclear. Here, based on the bow shock crossings of ARTEMIS from January 2011 to January 2015, new coefficients of the tail-flaring angle α of the Chao model (one of the most accurate models currently available) were obtained by fitting data from the middle-distance magnetotail (near-lunar orbit, geocentric distance -20R_E>X>-50R_E). In addition, the effects of the IMF B_y on the flaring angle α were analyzed. Our results showed that: (1) the new fitting coefficients of the Chao model in the middle-distance magnetotail are more consistent with the observed results; (2) the tail-flaring angle α of the bow shock increases as the absolute value of the IMF B_y increases. Moreover, positive IMF B_y has a greater effect than negative IMF B_y on flaring angle. These results provide a reference for bow shock modeling that includes the IMF B_y.     

Gamma ray spectra of some lavas from Vesuvius

The authors have carried out the gamma-ray spectrometry of some Vesuvius lavas, by means of a S.E.L.O. equipment which consists of a 100 channels analyzer joined to a photomultiplier tube annexed to aNaI(T1) phosphor. TheU ²³⁸,Th ²³²,Ra ²²⁶ andK ₂ O contents have been determined and the following conclusions have been drawn: theU ²³⁸ seems to be present in the examined lavas and the contents are fairly equal within the errors; also theTh ²³² andK ₂ O contents show no sensible variations in the different lavas. TheRa ²²⁶ content is remarkably higher than that necessary for the equilibrium with the observedU ²³⁸ content and shows a decrease with the age of the lavas. TheRa ²²⁶ content which exceeds that necessary for the equilibrium with the observedU ²³⁸ content decreases with a law similar to the natural radioactive decay ofRa ²²⁶.     

Detailed Study of Time Variations in the Gutenberg–Richter <Emphasis Type="Italic">b</Emphasis>-value Based on Highly Accurate Seismic Observations at the Garm Prognostic Site,Tajikistan

The time variations in the Gutenberg–Richter b-value are minutely studied based on the data of highly accurate seismological observations at the Garm prognostic site, Tajikistan, where a stationary network of seismic stations of the Complex Seismological Expedition (CSE) of Schmidt Institute of Physics of the Earth (IPE) of the USSR (Russian) Academy of Sciences was in operation from 1955 to 1992. A total of 93035 local earthquakes ranging from 0.0 to 6.3 in the Ml magnitudes are considered. The spatiotemporal fluctuations in the minimal magnitude of completeness of the earthquakes, Mc, are analyzed. The study considers a 25-year interval of the observations at the center of the observation system within which Mc = 0.9. It is shown that in most cases, the b-value and log₁₀E^2/3 experience characteristic time variations before the earthquakes with magnitudes higher than the minimal magnitude of the predicted earthquake (MPE). The 6-year anomaly in the parameters’ b-value, log₁₀E^2/3, and log₁₀N associated with the single strongest earthquake with M = 6.3 that occurred in the observation region on October 26, 1984 is revealed. The inversely proportional relationship is established between the time variations in the b-value and the time variations in the velocities of seismic waves Vp and Vp/Vs. It is shown that the exponent p in the power function which links the time variations of the b-value and log₁₀E^2/3 is higher in the zones of crustal compression than in the zones of extension. It is simultaneously confirmed that the average b-value in the zones of compression is lower than in the zones of extension. It is established that in the case of earthquakes with M ≥ 2.6, the time series of seismic activity log₁₀N_i and the time series of the b-value are highly cross correlated with a coefficient of r ≈ 0.75, whereas in the case of earthquakes with M ≥ 0.9, the coefficient of cross correlation between these time series is close to zero (r ≈ 0.06). The law of variations in the slope of the lines approximating the relationship between the log₁₀N_i time series in the different magnitude ranges (M ≥ Mc_i) and b-value time series is obtained. It is hypothesized that the seismic activity of the earthquakes with high magnitudes can be estimated provided that the parameters of the time series of the b-value and time series of the number of earthquakes logN(ΔM_i) in the range of low magnitudes are known. It is concluded that using the parameter log₁₀N for prognostic estimates of the strong earthquakes only makes sense for earthquakes having moderate and large magnitudes. It is inferred that the time variations in the b-value are predominantly contributed by the time variations of the earthquakes with relatively large magnitudes.