Electronic absorption spectra of Cr3+ ions in natural clinopyroxenes

The polarized (E‖a′, E‖b and E‖c) electronic absorption spectra of five natural chromium-containing clinopyroxenes with compositions close to chromdiopside, omphacite, ureyite-jadeite (12.8% Cr₂O₃), jadeite, and spodumene (hiddenite) were studied. The polarization dependence of the intensities of the Cr³⁺ bands in the clinopyroxene spectra cannot be explained by the selection rules for the point groups C ₂ or C _2v but can be accounted for satisfactorily with the help of the higher order pseudosymmetry model, i.e. with selection rules for the point symmetry group C _3v. The trigonal axis of the pseudosymmetry crystal field forms an angle of 20.5° with the crystallographic direction c in the (010) plane. D _q increases from diopside (1542 cm^?1) through omphacite (1552 cm^?1), jadeite (1574 cm^?1) to spodumene (1592 cm^?1). The parameter B which is a measure of covalency for Cr³⁺-O bonds at M1 sites in clinopyroxene depends on the Cr³⁺ concentration and the cations at M2 sites.     

Characterization and origin of two Fe3+ EPR spectra in kaolinite

The electron paramagnetic resonance (EPR) spectra of Fe³⁺ in a well cristallized kaolinite from Decazeville in France are well resolved. It is shown that in this sample there are mainly two slightly different spectra, well separated at low temperature and characterized at -150° C by the constants B ₂ ⁰ = 0.112 cm^?1, B ₂ ² = 0.0688 cm^?1 for one and B ₂ ⁰ = 0.116 cm^?1, B ₂ ² = 0.0766 cm^?1 for the second. These two spectra arise from Fe³⁺ substituted for Al³⁺ at the two octahedral positions in equal amounts. The temperature dependence of EPR spectra was studied and was explained by a modification of the octahedral sites.     

Electron paramagnetic resonance and ENDOR studies of Cr3+ - Al3+ pairs in forsterite

The electron paramagnetic resonance (EPR) spectrum of Cr³⁺ in synthetic crystals of forsterite consists primarily of lines of Cr³⁺ “isolated” at the M1 and M2 positions in a “perfect” crystal environment without local charge compensation. In addition it shows two nonequivalent superhyperfine-split sextets with different intensities which are due to strong interaction of the Cr³⁺ electron spin S (S=3/2) with an adjacent nuclear spin I(I=5/2). Electron nuclear double resonance (ENDOR) experiments revealed that the sextets result from Cr³⁺ (M1) - Al³⁺ and Cr³⁺ (M2) - Al³⁺ pairs, Al being located at adjacent tetrahedral Si sites. The g, D, A, and A′ tensor components of the Cr³⁺ - Al³⁺ pairs have been determined at room temperature. The values of the pairs are distinct although they are not very different from the corresponding data of “isolated” Cr³⁺. From the intensities of the EPR spectra the relative concentration of the Cr³⁺ - Al³⁺ pairs with respect to “isolated” Cr³⁺ has been estimated.     

Dislocation strain energy in the Al2SiO5 polymorphs

Molar elastic strain energy arising from dislocations in andalusite and sillimanite were calculated using equations derived from a non-core, linear elasticity model. For perfect (unit) c screw dislocations in these polymorphs, minimum dislocation densities of about 10¹⁰/cm² are necessary to significantly perturb the andalusite=sillimanite equilibrium boundary in P-T space. Compared to unit c dislocations, smaller energy perturbations arise from dissociated c screw dislocations, which are commonly observed in kyanite and sillimanite. A low computed value of stacking fault energy (～30 ergs/cm²) in these polymorphs is compatible with the large separations of dissociated dislocations in these phases. Dislocation densities in naturally occurring Al₂SiO₅ polymorphs are typically <10⁸/cm². Assuming that these densities are representative of those existing during metamorphism, as is supported by the lack of microtextures indicative of strong recovery, it is concluded that molar strain energies corresponding to observed dislocation densities (<10⁸/cm²) result in insignificant perturbation of P-T phase equilibrium boundaries of the Al₂SiO₅ polymorphs.     

Infrared reflection spectra,directional dispersion of the phonon modes and dynamical effective charges of FeS2-Marcasite

The polarized far-infrared reflection spectra of single crystals of FeS₂-marcasite are presented in the range from 40–700 cm^?1. The spectra show 7 reststrahlen bands, as predicted by group theory. The oscillator parameters ?_{α ∞}, ω_{α f}, ?_{α f}, γ_{α f}, and the transversal and longitudinal optical phonon frequencies ω_TO and ω_LO as well as effective ionic charges and oscillator strength weighted mean phonon frequencies were calculated. The anisotropic behaviour of these quantities is discussed in relation to the data for FeS₂-pyrite. It is shown that the ionicity of marcasite is considerably smaller than that of pyrite, especially in the a and c direction. The directional dependence of the phonon frequencies is given and discussed with regard to the spectra of polycrystalline samples.     

The crystal chemistry of birefringent natural uvarovites. Part III. Application of the superposition model of crystal fields with a characterization of synthetic cubic uvarovite

Synthetic, flux-grown uvarovite, Ca₃Cr₂ [SiO₄]₃, was investigated by optical methods, electron microprobe analysis, UV-VIS-IR microspectrometry, and luminescence spectroscopy. The crystal structure was refined using single-crystal X-ray CCD diffraction data. Synthetic uvarovite is optically isotropic and crystallizes in the “usual” cubic garnet space group Ia3¯d [a=11.9973 Å, Z=8; 21524 reflections, R1=2.31% for 454 unique data and 18 variables; Cr–O=1.9942(6), Si–O=1.6447(6), Ca–O_a=2.3504(6), Ca–O_b= 2.4971(6) Å]. The structure of Ca₃Cr₂[SiO₄]₃ complies with crystal-chemical expectations for ugrandite group garnets in general as well as with predictions drawn from “cubically averaged” data of non-cubic uvarovite–grossular solid solutions (Wildner and Andrut 2001). The electronic absorption spectra of Cr³⁺ in trigonally distorted octahedra of synthetic uvarovite were analyzed in terms of the superposition model (SM) of crystal fields. The resulting SM and interelectronic repulsion parameters are =9532 cm^?1, =4650 cm^?1, power law exponent t ₄=6.7, Racah B₃₅=703 cm^?1 at 290 K (reference distance R ₀=1.995 Å; fixed power law exponent t ₂=3 and spin-orbit parameter ζ=135 cm^?1). The interelectronic repulsion parameters Racah B ₅₅=714 cm^?1 and C=3165 cm^?1 were extracted from spin-forbidden transitions. This set of SM parameters was subsequently applied to previously well-characterized natural uvarovite–grossular solid solutions (Andrut and Wildner 2001a; Wildner and Andrut 2001) using their extrapolated Cr–O bond lengths to calculate the energies of the spin-allowed bands. These results are in very good agreement with the experimentally determined band positions and indicate the applicability of the superposition model to natural 3d ^N prevailing systems in geosciences. Single-crystal IR absorption spectra of synthetic uvarovite in the region of the OH-stretching vibration exhibit one isotropic absorption band at 3508 cm^?1 at ambient conditions, which shifts to 3510 cm^?1 at 77 K. This band is caused by structurally incorporated hydroxyl groups via the (O₄H₄)-hydrogarnet substitution. The water content, calculated using an integral extinction coefficient ?=60417 cm^?2 l mol^?1, is c _H2O=33 ppm.     

The geochemistry of pyroxenes from the lower layered series of the Jimberlana intrusion,Western Australia

Most of the Al³⁺ entering the pyroxenes does so by substituting for tetrahedral Si⁴⁺. This creates a charge imbalance that requires the simultaneous entry of Cr³⁺, Ti⁴⁺, Fe³⁺ or Al³⁺ into octahedral sites. Cr³⁺, because of its high crystal field stabilisation energy (CFSE), is the most important of these elements to enter the early-formed pyrosenes but it is replaced by Ti⁴⁺ later in fractionation when the Cr³⁺ content of the melt becomes depleted. The dependence of Cr³⁺ and Ti⁴⁺ on charge balance controls their partition between coexisting pyroxenes and olivines. Ca-rich pyroxene which contains more Al³⁺ than Ca-poor pyroxene also has more Ti⁴⁺ and Cr³⁺ whereas olivine, which contains negligible Al³⁺, has low Cr³⁺ and Ti⁴⁺. The Al³⁺ content of pyroxenes is influenced by changes in P, T, \(a_{{\text{SiO}}_{\text{2}} }\) and \(a_{{\text{Al}}_{\text{2}} {\text{O}}_{\text{3}} }\) of the magma and by the nature of the ion providing charge balance in the octahedral site. Of these \(a_{{\text{SiO}}_{\text{2}} }\) is dominant and variations in the Al³⁺ content of the Jimberlana pyroxenes correspond closely with the expected changes in the \(a_{{\text{SiO}}_{\text{2}} }\) of the melt. The substitution of divalent ions, such as Mn²⁺ and Ni²⁺, in the pyroxene lattice is by replacement of Fe²⁺ or Mg²⁺ in the octahedral M ₃ and M ₂ sites and is therefore independent of charge balance. If there are no size restrictions, the principal factor to be considered is the CFSE the ion receives in octahedral co-ordination. Ni²⁺, which receives a high CFSE, partitions strongly between the early-formed pyroxenes and olivines and therefore becomes depleted in the magma with fractionation. Conversely Mn²⁺, which receives zero CFSE, concentrates in the magma with fractionation and becomes a more important substitute in the later-formed pyroxenes. Its geochemical behaviour is controlled by its size. The narrow miscibility gap of the Jimberlana pyroxenes and the high En content of the Ca-poor pyroxenes at the bronzite pigeonite changeover suggest that these pyroxenes crystallised at a higher temperature than pyroxenes of comparable composition from other intrusions.     

EPR study of chromium-doped forsterite crystals: Cr3+(M1) with associated trivalent ions Al3+ and Sc3+

Electron paramagnetic resonance (EPR) study of single crystals of forsterite co-doped with chromium and scandium has revealed, apart from the known paramagnetic centers Cr³⁺(M1) and Cr³⁺(M1)– $ V_{{{\text{Mg}}^{2 + } }} $ (M2) (Ryabov in Phys Chem Miner 38:177–184, 2011), a new center Cr³⁺(M1)– $ V_{{{\text{Mg}}^{2 + } }} $ (M2)–Sc³⁺ formed by a Cr³⁺ ion substituting for Mg²⁺ at the M1 structural position with a nearest-neighbor Mg²⁺ vacancy at the M2 position and a Sc³⁺ ion presumably at the nearest-neighbor M1 position. For this center, the conventional zero-field splitting parameters D and E and the principal g values have been determined as follows: D?=?33,172(29) MHz, E?=?8,482(13) MHz, g?=?[1.9808(2), 1.9778(2), 1.9739(2)]. The center has been compared with the known ion pair Cr³⁺(M1)–Al³⁺ (Bershov et al. in Phys Chem Miner 9:95–101, 1983), for which the refined EPR data have been obtained. Based on these data, the known sharp M1″ line at 13,967?cm^?1 (with the splitting of 1.8?cm^?1), observed in low-temperature luminescence spectra of chromium-doped forsterite crystals (Glynn et al. in J Lumin 48, 49:541–544, 1991), has been ascribed to the Cr³⁺(M1)–Al³⁺ center. It has been found that the concentration of the new center increases from 0 up to 4.4?×?10¹⁵?mg^?1, whereas that of the Cr³⁺(M1) and Cr³⁺(M1)– $ V_{{{\text{Mg}}^{2 + } }} $ (M2) centers quickly decreases from 7.4?×?10¹⁵?mg^?1 down to 3?×?10¹⁵?mg^?1 and from 2.7?×?10¹⁵?mg^?1 down to 0.5?×?10¹⁵?mg^?1, i.e., by a factor of 2.5 and 5.4, respectively, with an increase of the Sc content from 0 up to 0.22 wt?% (at the same Cr content 0.25 wt?%) in the melt. When the Sc content exceeds that of Cr, the concentration of the new center decreases most likely due to the formation of the Sc³⁺(M1)– $ V_{{{\text{Mg}}^{2 + } }} $ (M2)–Sc³⁺ complex instead of the Cr³⁺(M1)– $ V_{{{\text{Mg}}^{2 + } }} $ (M2)–Sc³⁺ center. The formation of such ordered neutral complex is in agreement with the experimental results, concerning the incorporation of Sc into olivine, recently obtained by Grant and Wood (Geochim Cosmochim Acta 74:2412–2428, 2010).     

Fe2+-Fe3+ interactions in tourmaline

The color and spectroscopic properties of ironbearing tourmalines (elbaite, dravite, uvite, schorl) do not vary smoothly with iron concentration. Such behavior has often been ascribed to intervalence charge transfer between Fe²⁺ and Fe³⁺ which produces a new, intense absorption band in the visible portion of the spectrum. In the case of tourmaline, an entirely different manifestation of the interaction between Fe²⁺ and Fe³⁺ occurs in which the Fe²⁺ bands are intensified without an intense, new absorption band. At low iron concentrations, the intensity of light absorption from Fe²⁺ is about the same for E∥c and E⊥c polarizations, but at high iron concentrations, the intensity of the E⊥c polarization increases more than ten times as much as E∥c. This difference is related to intensification of Fe²⁺ absorption by adjacent Fe³⁺. Extrapolations indicate that pairs of Fe²⁺-Fe³⁺ have Fe²⁺ absorption intensity ～200 times as great as isolated Fe²⁺. Enhanced Fe²⁺ absorption bands are recognized in tourmaline by their intensity increase at 78 K of up to 50%. Enhancement of Fe²⁺ absorption intensity provides a severe limitration on the accuracy of determinations of Fe²⁺ concentration and site occupancy by optical spectroscopic methods. Details of the assignment of tourmaline spectra in the optical region are reconsidered.     

Channel constituents in beryl

The electronic absorption spectra of Fe²⁺ in non-chromium beryls are examined. Fe²⁺ in the Al-rich six-coordinate site produces absorption bands at about 820 nm and 970 nm polarizedE‖c. Fe²⁺ in the channel produces bands at 820 nm (⊥c) and 2100 nm (‖c). Some blue beryls which are more intensely colored than most aquamarines, have an absorption band at ～700 nm (‖c) which is suggested to arise from an Fe²⁺/Fe³⁺ intervalence interaction. Fe²⁺ in both the six-coordinate site and the channel is identified in the Mössbauer spectra. The Mössbauer spectra of deep blue beryls are unusual and have not been satisfactorily explained. Color changes which accompany heating and irradiation are strongly influenced by the channel iron.     

Magnetic structure and cation distribution in (Fe,Mn)2SiO4 (olivine) by neutron diffraction

The cation distribution in the synthetic samples of olivine-type structure with composition (Fe _x Mn_1?x )₂SiO₄ was determined at room temperature and confirms previous Mössbauer results. At low temperature an antiferromagnetic ordering is observed. The magnetic structures can be described in the crystallographic cell (i.e. k=0). They are interpreted on the basis of the irreducible representations (modes) of the symmetry groups which are compatible with Pnma. The dominant modes observed for all compounds, including Fe₂SiO₄ and Mn₂SiO₄, only differ in their direction. The main direction of magnetization is dominated by the Fe²⁺ single-ion anisotropy. At 4.2K, for x=0.29, it is parallel to the c-axis, whereas for x=0.76 the direction is parallel to the b-axis. The anisotropy of the M1-sites dominates in the first case, whereas M2-anisotropy dominates in the second case. The influence of temperature is demonstrated for x=0.50 where c is the main direction at 4.2K, when it is b at 38K.     

A Mössbauer investigation of natural troilite from the Agpalilik meteorite

Troilite close to FeS, with 0.17 weight percent Cr as main impurity, was obtained from the Agpalilik meteorite. Powder Mössbauer spectroscopy was made in the temperature range 77–645 K. The full Hamiltonian was applied in the fittings. Assuming the asymmetry parameter η to be constant on passing from the high-temperature NiAs-type structure to the medium-temperature MnP-type structure yields a quadrupole splitting (dq=0.5e² qQ(1+(η²)/3)^1/2) value of ?0.25(2) mm/s for these phases. In low-temperature troilite |dq|=0.85 mm/s at room temperature. The combinations of (η, θ, φ) in troilite giving identical spectra range from (0, 49°, -) to (1, 45°, 50°) for negative V _zz or from (0.3, 57°, 78°) to (1, 58°, 54°) for positive V _zz . Assuming a negative V _zz and B‖c gives a θ value in agreement with the shortest Fe-S join being the V _zz orientation. The magnetic spin flip of 90° is proposed to occur in the MnP-phase only. The MnP phase-troilite transition occurs at lower temperatures and is more sluggish than in pure FeS.     

Spectroscopic studies on natural chloritoids

Room temperature and low temperature Mössbauer and optical absorption spectroscopic data on six natural chloritoids characterized by means of electron microprobe and X-ray powder diffraction techniques are presented. Two narrow quadrupole doublets with widths of 0.25–0.29 mm/s assigned to Fe²⁺ in a relatively large octahedral site and Fe³⁺ in a smaller octahedral site, are observed in the Mössbauer spectra. Polarized optical absorption spectra reveal three main absorption bands. A broad absorption band at 16,300 cm^?1, which is strongly polarized in E‖X and E‖Y and shows a linear increase in integral absorption with increasing [Fe²⁺] [Fe³⁺] concentration product, is assigned to a Fe²⁺+Fe³⁺→Fe³⁺+Fe²⁺ charge transfer transition. This band displays also a temperature dependence different from that of single ion d?d transitions. Two absorption bands at 10,900 cm^?1 and 8,000 cm^?1 are, on the basis of compositional dependence and energy, assigned to Fe²⁺ in the large M(1B) octahedra of the brucite-type layer in chloritoid. Combined spectroscopic evidence and structural and chemical considerations support a distribution scheme for ferrous and ferric iron which orders the Fe²⁺ ions in the M(1B) octahedra and the Fe³⁺ ions in the small M(1A) octahedral sites. Both types of octahedra are found in the brucite type layer of chloritoid.     

Electronic absorption spectra of chromium-bearing sapphirine

Violet, non-pleochroic and greenish-blue, pleochroic chromium-substituted sapphirines were found in corundum-bearing spinel-websterite xenolites from the Yakutian kimberlite pipes Noyabrskaya (N) and Sludyanka (Sl), respectively. The crystallochemical formulae of sapphirine crystals from such xenolites were determined by EMP to be (Mg_3.40Fe_0.23Al_3.25Cr_0.16)^[6] Al _1.00 ^[6] [O₂/Al_4.53Si_1.47O₁₈] (N) and (Mg_2.53Fe_0.55 Mn_0.04Ti _0.03 ⁴⁺ Al_3.55Cr _0.08 ³⁺ )^[6]Al _1.00 ^[16] [O₂/Al_4.28Si_1.73O₁₈] (Sl). Single crystal spectra in the range 35000–6000 cm^1- showed a slightly polarization dependent absorption edge near 3200 cm^1- (N) or 30000 cm^1- (Sl) and unpolarized bands at 25300 and 17300 cm^1-, typical of spin-allowed transitions, derived from ⁴A_2g→⁴T_1g and ⁴A_2g→⁴T_2g, of Cr³⁺ in octahedral sites, with point symmetry C₁, of the structure. Another weak band at 23000 cm^?1 in the sapphirine-N spectra is attributed to low symmetry splitting of the excited ⁴T₁ (F)-State of Cr³⁺. These assignments lead to crystal field parameters Dq=1730cm^?1 and B= 685cm^?1 of Cr³⁺ in sapphirine. Crystallochemical and spectroscopic arguments suggest that Cr³⁺ subsitutes for Al in the M(1) or M(8) sites of the sapphirine structure. In addition to Cr³⁺-transitions, spectra of Sl exhibit weak dd-bands of Fe²⁺ at 10000 and 7700 cm^1-, which are unpolarized in consistency with the C₁ site symmetry of the octahedra in the structure. Spectra of Sl show also prominent, broad bands (Δv_1/2～-5000 cm^1-) at 15000 and 11000 cm^1-, which occur in E//Y(//b) and E//Z(//_c=12°) only and exhibit an intensity ratio α_Y∶α_z close to 1∶3. This result, the large half width, as well as band energy — MM distance considerations suggest that these bands originate from Fe^2+[6]-Fe^3+[6] charge-transfer transitions in wall octahedra M(1)M(2), M(6)M(7) etc., forming MM vectors of 30° with the c-axis. The lack of Fe²⁺-Fe³⁺ charge-transfer bands in sapphirine N might indicate a lower oxygen fugacity during the formation of the websterite from the Noyabrskaya pipe compared to that from the Sludyanka pipe.     

Chromium solubility in anhydrous Phase B

The crystal structure and chemical composition of a crystal of (Mg_14?x Cr _x )(Si_5?x Cr _x )O₂₄ (x ≈ 0.30) anhydrous Phase B (Anh-B) synthesized in the model system MgCr₂O₄–Mg₂SiO₄ at 12 GPa and 1600 °C have been investigated. The compound was found to be orthorhombic, space group Pmcb, with lattice parameters a = 5.900(1), b = 14.218(2), c = 10.029(2) Å, V = 841.3(2) Å³ and Z = 2. The structure was refined to R ₁ = 0.065 using 1492 independent reflections. Chromium was found to substitute for both Mg at the M3 site (with a mean bond distance of 2.145 Å) and Si at the octahedral Si1 site (mean bond distance: 1.856 Å), according to the reaction Mg²⁺ + Si⁴⁺ = 2Cr³⁺. Such substitutions cause a reduction in the volume of the M3 site and an increase in the volume of the Si-dominant octahedron with respect to the values typically observed for pure Anh-B and Fe²⁺-bearing Anh-B. Taking into account that Cr³⁺ is not expected to be Jahn–Teller active, it appears that both the Cr³⁺–for–Mg and Cr³⁺–for–Si substitutions in the Anh-B structure decrease the distortion of the octahedra. Electron microprobe analysis gave the Mg_13.66(8)Si_4.70(6)Cr_0.62(4)O₂₄ stoichiometry for the studied phase. The successful synthesis of this phase provides new information for the possible mineral assemblages occurring in the Earth’s deep upper mantle and shed new light on the so-called X discontinuity that has been observed at 275–345 km depth in several subcontinental and subduction zone environments.     

Kanonaite, (Mn 0.76 3+ Al0.23Fe 0.02 3+ )[6]Al[5][O¦SiO4], a new mineral isotypic with andalusite

Kanonaite forms rare porphyroblasts up to 12mm long in a gahnite— Mg-chlorite — coronadite — quartz schist occurring near Kanona, Zambia. The composition is (microprobe analysis): SiO₂ 32.2, Al₂O₃ 33.9, Mn as Mn₂O₃ 32.2, Fe₂O₃ 0.66, ZnO 0.13, MgO 0.04, BaO 0.04, TiO₂ 0.01, CaO 0.01, PbO 0.01, CuO 0.01, total 99.21, corresponding to $$\left( {{\text{Mn}}_{{\text{0}}{\text{.76}}}^{{\text{3 + }}} {\text{Al}}_{{\text{0}}{\text{.23}}} {\text{Fe}}_{{\text{0}}{\text{.015}}}^{{\text{3 + }}} } \right)_{1.005}^{\left[ 6 \right]} {\text{AL}}_{1.00}^{\left[ 5 \right]} \left[ {{\text{O}}_{{\text{1}}{\text{.00}}} |{\text{Si}}_{{\text{0}}{\text{.99}}} {\text{O}}_{{\text{4}}{\text{.00}}} } \right]$$ The mineral is greenish black, strongly pleochroic with X(∥a) yellow green, Y(∥b) bluish green, Z(∥c) deep golden yellow, biaxial positive, with 2V = 53°(3°), α = 1.702, β = 1.730, γ = 1.823. Vickers microhardness (100 gram load) ranges between 906 and 1017kp/mm². The structure is orthorhombic, isotypic with andalusite, space group Pnnm, a = 0.7953(2), b = 0.8038(2), c = 0.5619(2) nm, V = 0.3592(1) nm³, a/b = 0.9895(3), c/b = 0.6990(3), S.G.(_x) = 3.395 g/cm³, Z = 4. The strongest X-ray powder lines are (d in nm, I, hkl):0.5669, 100, 110; 0.4590, 75, 011 and 101; 0.3577, 90, 120 and 210; 0.2827, 94, 220; 0.2517, 90, 310 and 112; 0.2212, 83, 320, 122 and 212. Comparison of the intensities of 373 observed X-ray reflections with those calculated for several models of Mn³⁺-distribution indicates octahedral coordination of all or most of the manganese present. Interpretation of magnetic measurements (μ_eff = 3.15B.M. per Mn atom at 25 ° C) indirectly supports octahedral coordination of Mn³⁺. The name of the mineral is for Kanona, a town near the type locality. The name is proposed for the end member Mn^{3+ [6]}Al^[5][O¦SiO₄] and for members of the solid-solution series towards andalusite with octahedral Mn³⁺>Al. The presently described mineral may be referred to as aluminian kanonaite.     

Single-crystal polarized FTIR spectroscopy and neutron diffraction refinement of cancrinite

We relate a single-crystal FTIR (Fourier transform infrared) and neutron diffraction study of two natural cancrinites. The structural refinements show that the oxygen site of the H₂O molecule lies off the triad axis. The water molecule is almost symmetric and slightly tilted from the (0001) plane. It is involved in bifurcated hydrogen bridges, with Ow···O donor–acceptor distances >2.7 Å. The FTIR spectra show two main absorptions. The first at 3,602 cm^?1 is polarized for E ⊥ c and is assigned to the ν₃ mode. The second, at 3,531 cm^?1, is also polarized for E ⊥ c and is assigned to ν₁ mode. A weak component at 4,108 cm^?1 could possibly indicate the presence of additional OH groups in the structure of cancrinite. Several overlapping bands in the 1,300–1,500 cm^?1 range are strongly polarized for E ⊥ c, and are assigned to the vibrations of the CO₃ group.     

Synthesis and physical properties of piemontite Ca2Al3-pMn p 3+ (Si2O7/SiO4/O/OH)

Mn³⁺-bearing piemontites and orthozoisites, Ca₂(Al_3-pMn³⁺ _p)-(Si₂O₇/SiO₄/O/OH), have been synthesized on the join Cz (p = 0.0)-Pm (p = 3.0) of the system CaO-Al₂O₃-(MnO·MnO₂)-SiO₂-H₂O atP = 15 kb,T= 800 °C, and \(f_{O_2 } \) of the Mn₂O₃/MnO₂ buffer. Pure Al-Mn³⁺-piemontites were obtained with 0.5≦p≦1.75, whereas atp=0.25 Mn³⁺-bearing orthozoisite (thulite) formed as single phase product. The limit of piemontite solid solubility is found near p=1.9 at the above conditions. Withp>1.9, the maximum piemontite coexisted with a new high pressure phase CMS-X1, a Ca-bearing braunite (Mn _0.2 ²⁺ Ca_0.8)Mn ₆ ³⁺ O₈(SiO₄), and quartz. Al-Mn³⁺-piemontite lattice constants (LC),b ₀,c ₀,V ₀, increase with increasingp:

Predictive crystal-chemical relations in Ti-silicates based on the TS block

In a group of minerals of reasonable complexity in which the structure topology is related but not identical, the general relation between structure topology and chemical composition is not known. This problem is of major significance. The structural hierarchy and stereochemistry are described for 27 titanium disilicate minerals that contain the TS (titanium-silicate) block, a central trioctahedral (O) sheet and two adjacent (H) sheets of [5]- and [6]-coordinated polyhedra and (Si₂O₇) groups and related delindeite. The TS block is characterized by a planar cell based on translation vectors, t ₁ and t ₂ , with t ₁ ～ 5.5 and t ₂ ～ 7 Å and t ₁ ∧ t ₂ close to 90°. The general formula of the TS block is A ₂ ^P B ₂ ^P M ₂ ^H M ₄ ^O (Si ₂ O ₇ ) ₂ X _{4 + n}, where M ₂ ^H and M ₄ ^O = cations of the H and O sheets; M^H = Ti (= Ti + Nb), Zr, Mn²⁺, Ca; M^O = Ti, Zr, Mn²⁺, Ca, Na; A ^P and B ^P are cations at the peripheral (P) sites = Na, Ca, Ba; X = anions = O, OH, F; n = 0, 2, 4; the core part of the TS block is shown in bold and is invariant. Cations in each sheet of the TS block form a close-packed layer and the three layers are cubic close packed.There are three topologically distinct TS blocks, depending on the type of linkage of two H sheets and the central O sheet. The H sheets of one TS block attach to the O sheet in the same manner. All structures consist of a TS block and an I (intermediate) block that comprises atoms between two TS blocks. Usually, the I block consists of alkali and alkaline-earth cations, (H₂O) groups and oxyanions (PO₄)^3?, (SO₄)^2? and (CO₃)^2?. These structures naturally fall into four groups, based on differences in topology and stereochemistry of the TS block. In Group I, Ti = 1 apfu Ti occurs in the O sheet, and (Si₂O₇) groups link to a Na polyhedron of the O sheet (linkage 1). In Group II, Ti = 2 apfu, Ti occurs in the H sheet, and (Si₂O₇) groups link to two M ²⁺ octahedra of the O sheet adjacent along t ₂ (linkage 2). In Group III, Ti = 3 apfu, Ti occurs in the O and H sheets, and (Si₂O₇) groups link to the Ti octahedron of the O sheet (linkage 1). In Group IV, Ti = 4 apfu (the maximum possible content of Ti in the TS block), Ti occurs in the O and H sheets, and (Si₂O₇) groups link to two Ti octahedra of the O sheet adjacent along t ₁ (linkage 3). The stability of the TS block is due to the ability of Ti (Nb) to have an extremely wide range in Ti (Nb)-anion bond lengths, 1.68–2.30 Å, which allows the chemical composition of the TS block to vary widely. In crystal structures so far known, only one type of TS block occurs in a structure. The TS block propagates close-packing of cations onto the I block. The general structural principles and the relation between structure topology and chemical composition are described for the TS-block minerals. These principles allow prediction of structural arrangements and possible chemical compositions, and testing whether or not all aspects of the structure and chemical formula of a mineral are correct. Here, I show how these principles work, and review recent results that show the effectiveness of these principles as a predictive technique.