Near-vertical seismic reflection image using a novel acquisition technique across the Vrancea Zone and Foscani Basin, south-eastern Carpathians (Romania)

The DACIA PLAN (Danube and Carpathian Integrated Action on Process in the Lithosphere and Neotectonics) deep seismic sounding survey was performed in August–September 2001 in south-eastern Romania, at the same time as the regional deep refraction seismic survey VRANCEA 2001. The main goal of the experiment was to obtain new information on the deep structure of the external Carpathians nappes and the architecture of Tertiary/Quaternary basins developed within and adjacent to the seismically-active Vrancea zone, including the Focsani Basin. The seismic reflection line had a WNW–ESE orientation, running from internal East Carpathians units, across the mountainous south-eastern Carpathians, and the foreland Focsani Basin towards the Danube Delta. There were 131 shot points along the profile, with about 1 km spacing, and data were recorded with stand-alone RefTek-125s (also known as “Texans”), supplied by the University Texas at El Paso and the PASSCAL Institute. The entire line was recorded in three deployments, using about 340 receivers in the first deployment and 640 receivers in each of the other two deployments. The resulting deep seismic reflection stacks, processed to 20 s along the entire profile and to 10 s in the eastern Focsani Basin, are presented here. The regional architecture of the latter, interpreted in the context of abundant independent constraint from exploration seismic and subsurface data, is well imaged. Image quality within and beneath the thrust belt is of much poorer quality. Nevertheless, there is good evidence to suggest that a thick (10 km) sedimentary basin having the structure of a graben and of indeterminate age underlies the westernmost part of the Focsani Basin, in the depth range 10–25 km. Most of the crustal depth seismicity observed in the Vrancea zone (as opposed to the more intense upper mantle seismicity) appears to be associated with this sedimentary basin. The sedimentary successions within this basin and other horizons visible further to the west, beneath the Carpathian nappes, suggest that the geometry of the Neogene and recent uplift observed in the Vrancea zone, likely coupled with contemporaneous rapid subsidence in the foreland, is detached from deeper levels of the crust at about 10 km depth. The Moho lies at a depth of about 40 km along the profile, its poor expression in the reflection stack being strengthened by independent estimates from the refraction data. Given the apparent thickness of the (meta)sedimentary supracrustal units, the crystalline crust beneath this area is quite thin (< 20 km) supporting the hypothesis that there may have been delamination of (lower) continental crust in this area involved in the evolution of the seismic Vrancea zone.     

Crustal constraints on the origin of mantle seismicity in the Vrancea Zone, Romania: The case for active continental lithospheric delamination

The Vrancea zone of Romania constitutes one of the most active seismic zones in Europe, where intermediate-depth (70–200 km) earthquakes of magnitude in excess of M_w = 7.0 occur with relative frequency in a geographically restricted area within the 110° bend region of the southeastern Carpathian orogen. Geologically, the Vrancea zone is characterized by (a) a laterally restricted, steeply NW-dipping seismogenic volume (30 × 70 × 200 km), situated beneath (b) thickened continental crust within the highly arcuate bend region of the Carpathian orocline, and (c) miscorrelation of hypocenters with the position of known or inferred suture zones in the Carpathian orogenic system. Geologic data from petroleum exploration in the Eastern Carpathians, published palinspastic reconstructions, and reprocessing of industry seismic data from the Carpathian foreland indicate that (1) crust of continental affinity extends significantly westward beneath the external thrust nappes (Sub-Carpathian, Marginal Folds, and Tarcau) of the Eastern Carpathians, (2) Cretaceous to Miocene strata of continental affinity can be reconstructed westward to a position now occupied by the Transylvanian basin, and (3) geologic structure in the Carpathian foreland (including the Moho) is sub-horizontal directly to the east and above the Vrancea seismogenic zone. Taken together, these geologic relationships imply that the Vrancea zone occupies a region overlain by continental crust and upper mantle, and does not appear to originate from a subducted oceanic slab along the length of the Carpathian orogen. Accordingly, the Vrancea zone appears to potentially be an important place to establish evidence for active lithospheric delamination.     

2.5D seismic velocity modelling in the south-eastern Romanian Carpathians Orogen and its foreland

The DACIA-PLAN (Danube and Carpathian Integrated Action on Processes in the Lithosphere and Neotectonics) deep seismic reflection survey was performed in August–September 2001, with the objective of obtaining new information on the deep structure of the external Carpathians nappe system and the architecture of the Tertiary/Quaternary basins developed within and adjacent to the Vrancea zone, including the rapidly subsiding Focsani Basin. The DACIA-PLAN profile is about 140 km long, having a roughly WNW–ESE direction, from near the southeast Transylvanian Basin, across the mountainous south-eastern Carpathians and their foreland to near the Danube River. A high resolution 2.5D velocity model of the upper crust along the seismic profile has been determined from a tomographic inversion of the DACIA-PLAN first arrival data. The results show that the data fairly accurately resolve the transition from sediment to crystalline basement beneath the Focsani Basin, where industry seismic data are available for correlation, at depths up to about 10 km. Beneath the external Carpathians nappes, apparent basement (material with velocities above 5.8 km/s) lies at depths as shallow as 3–4 km, which is less than previously surmised on the basis of geological observations. The first arrival travel-time data suggest that there is significant lateral structural heterogeneity on the apparent basement surface in this area, suggesting that the high velocity material may be involved in Carpathian thrusting.     

VRANCEA99—the crustal structure beneath the southeastern Carpathians and the Moesian Platform from a seismic refraction profile in Romania

The VRANCEA99 seismic refraction experiment is part of an international and multidisciplinary project to study the intermediate depth earthquakes of the Eastern Carpathians in Romania. As part of the seismic experiment, a 300-km-long refraction profile was recorded between the cities of Bacau and Bucharest, traversing the Vrancea epicentral region in NNE–SSW direction.

The results deduced using forward and inverse ray trace modelling indicate a multi-layered crust. The sedimentary succession comprises two to four seismic layers of variable thickness and with velocities ranging from 2.0 to 5.8 km/s. The seismic basement coincides with a velocity step up to 5.9 km/s. Velocities in the upper crystalline crust are 5.9–6.2 km/s. An intra-crustal discontinuity at 18–31 km divides the crust into an upper and a lower layer. Velocities within the lower crust are 6.7–7.0 km/s. Strong wide-angle PmP reflections indicate the existence of a first-order Moho at a depth of 30 km near the southern end of the line and 41 km near the centre. Constraints on upper mantle seismic velocities (7.9 km/s) are provided by Pn arrival times from two shot points only. Within the upper mantle a low velocity zone is interpreted. Travel times of a PLP reflection define the bottom of this low velocity layer at a depth of 55 km. The velocity beneath this interface must be at least 8.5 km/s.

Geologic interpretation of the seismic data suggests that the Neogene tectonic convergence of the Eastern Carpathians resulted in thin-skinned shortening of the sedimentary cover and in thick-skinned shortening in the crystalline crust. On the autochthonous cover of the Moesian platform several blocks can be recognised which are characterised by different lithological compositions. This could indicate a pre-structuring of the platform at Mesozoic and/or Palaeozoic times with a probable active involvement of the Intramoesian and the Capidava–Ovidiu faults. Especially the Intramoesian fault is clearly recognisable on the refraction line. No clear indications of the important Trotus fault in the north of the profile could be found. In the central part of the seismic line a thinned lower crust and the low velocity zone in the uppermost mantle point to the possibility of crustal delamination and partial melting in the upper mantle.     

Seismic crustal structure between the Transylvanian Basin and the Black Sea, Romania

In order to study the lithospheric structure in Romania a 450 km long WNW–ESE trending seismic refraction project was carried out in August/September 2001. It runs from the Transylvanian Basin across the East Carpathian Orogen and the Vrancea seismic region to the foreland areas with the very deep Neogene Focsani Basin and the North Dobrogea Orogen on the Black Sea. A total of ten shots with charge sizes 300–1500 kg were recorded by over 700 geophones. The data quality of the experiment was variable, depending primarily on charge size but also on local geological conditions. The data interpretation indicates a multi-layered structure with variable thicknesses and velocities. The sedimentary stack comprises up to 7 layers with seismic velocities of 2.0–5.9 km/s. It reaches a maximum thickness of about 22 km within the Focsani Basin area. The sedimentary succession is composed of (1) the Carpathian nappe pile, (2) the post-collisional Neogene Transylvanian Basin, which covers the local Late Cretaceous to Paleogene Tarnava Basin, (3) the Neogene Focsani Basin in the foredeep area, which covers autochthonous Mesozoic and Palaeozoic sedimentary rocks as well as a probably Permo-Triassic graben structure of the Moesian Platform, and (4) the Palaeozoic and Mesozoic rocks of the North Dobrogea Orogen. The underlying crystalline crust shows considerable thickness variations in total as well as in its individual subdivisions, which correlate well with the Tisza-Dacia, Moesian and North Dobrogea crustal blocks. The lateral velocity structure of these blocks along the seismic line remains constant with about 6.0 km/s along the basement top and 7.0 km/s above the Moho. The Tisza-Dacia block is about 33 to 37 km thick and shows low velocity zones in its uppermost 15 km, which are presumably due to basement thrusts imbricated with sedimentary successions related to the Carpathian Orogen. The crystalline crust of Moesia does not exceed 25 km and is covered by up to 22 km of sedimentary rocks. The North Dobrogea crust reaches a thickness of about 44 km and is probably composed of thick Eastern European crust overthrusted by a thin 1–2 km thick wedge of the North Dobrogea Orogen.     

Seismic studies of the Brasília fold belt at the western border of the São Francisco Craton, Central Brazil, using receiver function, surface-wave dispersion and teleseismic tomography

The Tocantins Province in Central Brazil is composed of a series of SSW–NNE trending terranes of mainly Proterozoic ages, which stabilized in the Neoproterozoic in the final collision between the Amazon and São Francisco cratons. No previous information on crustal seismic properties was available for this region. Several broadband stations were used to study the regional patterns of crustal and upper mantle structure, extending the results of a recent E–W seismic refraction profile. Receiver functions and surface wave dispersion showed a thin crust (33–37 km) in the Neoproterozoic Magmatic Arc terrane. High average crustal Vp/Vs ratios (1.74–1.76) were consistently observed in this unit. The foreland domain of the Brasília foldbelt, on the other hand, is characterized by thicker crust (42–43 km). Low Vp/Vs ratios (1.70–1.72) were observed in the low-grade foreland fold and thrust zone of the Brasília belt adjacent to the São Francisco craton. Teleseismic P-wave tomography shows that the lithospheric upper mantle has lower velocities beneath the Magmatic Arc and Goiás Massif compared with the foreland zone of the belt and São Francisco craton. The variations in crustal thickness and upper mantle velocities observed with the broadband stations correlate well with the measurements along the seismic refraction profile. The integration of all seismic observations and gravity data indicates a strong lithospheric contrast between the Goiás Massif and the foreland domain of the Brasília belt, whereas little variation was found across the foldbelt/craton surface boundary. These results support the hypothesis that the Brasília foreland domain and the São Francisco craton were part of a larger São Francisco-Congo continental plate in the final collision with the Amazon plate.     

Late Miocene–Quaternary volcanism, tectonics and drainage system evolution in the East Carpathians, Romania

Middle Miocene (Sarmatian) convergence created the fold and thrust belt of the Eastern Carpathians of Romania, which subsequently experienced post-collisional crustal deformation combined with calc-alkaline and alkalic-basaltic volcanism in late Miocene–Quaternary time. This deformation led to the rise of the Cǎlimani–Gurghiu–Harghita volcanic mountains and to the subsidence of the N–S-oriented intramontane Borsec/Bilbor–Gheorgheni–Ciuc and Braşov pull-apart basins, and the E-oriented monocline-related Fǎgǎraş basin. The regional drainage network is the composite of:

(1) Older E-, SE- and S-flowing rivers, which cross the Carpathians, radiate towards the foreland and were probably established during the Middle Miocene (Sarmatian) collision event.

(2) A more recent drainage system related to the contemporaneous development of the volcanoes and intramontaneous basins, which generally drains westward into the Transylvanian Basin since late Miocene time and has been capturing the older river system.

The older river drainage system has also been modified by Late Pliocene–Quaternary folding, thrusting and monoclinal tilting along the Pericarpathian orogenic front and by reactivated transverse high angle basement faults, which cross the Eastern Carpathian foreland.     

Seismicity and structural investigations of the Romanian Vrancea Region: Evidence for azimuthal variations of p-wave velocity and poisson's ratio

A study of the shallow and intermediate depth seismicity of the Romanian Vrancea region in the period 1964–1981 has been performed. The seismic events have been relocated by a standard location procedure using a regional velocity model. From the temporal and spatial distribution of the seismic activity, aspects of the seismicity before the large March 4, 1977 earthquake are treated, in particular the seismic gap in space and time prior to this event, found by Mârze (1979), which is critically discussed and revised. The concept of the precursor time/magnitude relationships of different authors is applied and its validity to the Vrancea region assessed. The hypocentral distribution shows that the intermediate depth seismic activity is confined to a small volume with dimensions of only some tens of kilometers. The results are interpreted in terms of the tectonics of the region. From an analysis of the travel-time residuals at different local stations, evidence for lateral velocity heterogeneities beneath the region is obtained e.g. a high velocity zone southeastwards of the Carpathian chain. Finally mean ratios, (i.e. Poisson's ratios), for various stations are calculated from P- and S-wave travel times. They show azimuthal variations of up to 6% for stations within the area where the intermediate seismic activity occurs in comparison with the station Focsani, situated eastwards in the Carpathian foredeeps. All these results are compatible with the plate tectonic concept for the Vrancea region, that is the subduction of an oceanic lithospheric slab under the Carpathian mountain arc, giving rise to such a highly active seismic zone.     

The crustal structure of the Guayana Shield, Venezuela, from seismic refraction and gravity data

We present results from a seismic refraction experiment on the northern margin of the Guayana Shield performed during June 1998, along nine profiles of up to 320 km length, using the daily blasts of the Cerro Bolívar mines as energy source, as well as from gravimetric measurements. Clear Moho arrivals can be observed on the main E–W profile on the shield, whereas the profiles entering the Oriental Basin to the north are more noisy. The crustal thickness of the shield is unusually high with up to 46 km on the Archean segment in the west and 43 km on the Proterozoic segment in the east. A 20 km thick upper crust with P-wave velocities between 6.0 and 6.3 km/s can be separated from a lower crust with velocities ranging from 6.5 to 7.2 km/s. A lower crustal low velocity zone with a velocity reduction to 6.3 km/s is observed between 25 and 25 km depth. The average crustal velocity is 6.5 km/s. The changes in the Bouguer Anomaly, positive (30 mGal) in the west and negative (−20 mGal) in the east, cannot be explained by the observed seismic crustal features alone. Lateral variations in the crust or in the upper mantle must be responsible for these observations.     

2D model of the crust and uppermost mantle along rift profile, Siberian craton

A two-dimensional model of the crust and uppermost mantle for the western Siberian craton and the adjoining areas of the Pur-Gedan basin to the north and Baikal Rift zone to the south is determined from travel time data from recordings of 30 chemical explosions and three nuclear explosions along the RIFT deep seismic sounding profile. This velocity model shows strong lateral variations in the crust and sub-Moho structure both within the craton and between the craton and the surrounding region. The Pur-Gedan basin has a 15-km thick, low-velocity sediment layer overlying a 25-km thick, high-velocity crystalline crustal layer. A paleo-rift zone with a graben-like structure in the basement and a high-velocity crustal intrusion or mantle upward exists beneath the southern part of the Pur-Gedan basin. The sedimentary layer is thin or non-existent and there is a velocity reversal in the upper crust beneath the Yenisey Zone. The Siberian craton has nearly uniform crustal thickness of 40–43 km but the average velocity in the lower crust in the north is higher (6.8–6.9 km/s) than in the south (6.6 km/s). The crust beneath the Baikal Rift zone is 35 km thick and has an average crustal velocity similar to that observed beneath the southern part of craton. The uppermost mantle velocity varies from 8.0 to 8.1 km/s beneath the young West Siberian platform and Baikal Rift zone to 8.1–8.5 km/s beneath the Siberian craton. Anomalous high Pn velocities (8.4–8.5 km/s) are observed beneath the western Tunguss basin in the northern part of the craton and beneath the southern part of the Siberian craton, but lower Pn velocities (8.1 km/s) are observed beneath the Low Angara basin in the central part of the craton. At about 100 km depth beneath the craton, there is a velocity inversion with a strong reflecting interface at its base. Some reflectors are also distinguished within the upper mantle at depth between 230 and 350 km.     

Upper crustal seismic structure of the Mazury complex and Mazowsze massif within East European Craton in NE Poland

The large-scale seismic experiment POLONAISE '97 (POlish Lithospheric ONsets—An International Seismic Experiment) was carried out in May 1997 in Poland, Lithuania, and Germany. Its main purpose was to investigate the structure of the crust and the uppermost mantle in the region of the Trans European Suture Zone (TESZ) that lies between the East European Craton (EEC) and the Palaeozoic Platform. This paper covers the interpretation of seismic data along the NW–SE-trending, 180-km-long profile P5 located on the EEC. The recordings were of a high quality with seismic energy clearly visible along the whole profile. We have not found waves refracted below the upper crust in first arrivals. In the NW part of the profile, we have delineated a high-velocity body with the P-wave velocity in the range of 6.5–6.75 km/s in the upper crust. It corresponds to the K trzyn anorthosite massif within the Mazury complex. The Mazowsze massif is rather uniformly characterized by P-wave velocities 5.9–6.05 and 6.2–6.35 km/s in two layers, respectively. Sufficient S-wave data were available to estimate the V_p/V_s ratio (as well as the Poisson ratio), being 1.80 (0.277) in the high-velocity body and 1.67 (0.220) in the upper crust.Apart from the 2-D model along the profile, results of 3-D modelling in the area of the P5 profile are presented. Using off-line recordings, we got P-wave velocity field up to 8 km/s below the P5 profile at the depth of about 40 km as well as horizontal extent of the high-velocity body.     

Saudi Arabian seismic-refraction profile: A traveltime interpretation of crustal and upper mantle structure

The crustal and upper mantle compressional-wave velocity structure across the southwestern Arabian Shield has been investigated by a 1000-km-long seismic refraction profile. The profile begins in Mesozoic cover rocks near Riyadh on the Arabian Platform, trends southwesterly across three major Precambrian tectonic provinces, traverses Cenozoic rocks of the coastal plain near Jizan, and terminates at the outer edge of the Farasan Bank in the southern Red Sea. More than 500 surveyed recording sites were occupied, and six shot points were used, including one in the Red Sea.Two-dimensional ray-tracing techniques, used to analyze amplitude-normalized record sections indicate that the Arabian Shield is composed, to first order, of two layers, each about 20 km thick, with average velocities of about 6.3 km/s and 7.0 km/s, respectively. West of the Shield-Red Sea margin, the crust thins to a total thickness of less than 20 km, beyond which the Red Sea shelf and coastal plain are interpreted to be underlain by oceanic crust.A major crustal inhomogeneity at the northeast end of the profile probably represents the suture zone between two crustal blocks of different composition. Elsewhere along the profile, several high-velocity anomalies in the upper crust correlate with mapped gneiss domes, the most prominent of which is the Khamis Mushayt gneiss. Based on their velocities, these domes may constitute areas where lower crustal rocks have been raised some 20 km. Two intracrustal reflectors in the center of the Shield at 13 km depth probably represent the tops of mafic intrusives.The Mohorovičić discontinuity beneath the Shield varies from a depth of 43 km and mantle velocity of 8.2 km/s in the northeast to a depth of 38 km and mantle velocity of 8.0 km/s depth in the southwest near the Shield-Red Sea transition. Two velocity discontinuities occur in the upper mantle, at 59 and 70 km depth.The crustal and upper mantle velocity structure of the Arabian Shield is interpreted as revealing a complex crust derived from the suturing of island arcs in the Precarnbrian. The Shield is currently flanked by the active spreading boundary in the Red Sea.     

Crustal properties from S-wave and gravity data along a seismic refraction profile in Romania

VRANCEA'99 is a seismic refraction line that was carried out in 1999 to investigate the deep structure and physical properties of the upper lithosphere of the southeastern Carpathians and its foreland. It runs from the city of Bacau to the Danube River, traversing the Vrancea epicentral area of strong intermediate-depth seismicity and the city of Bucharest.

Interpretation of P-wave arrivals led to a velocity model that displays a multi-layered crust with velocities increasing with depth. The range of P wave velocities in the sedimentary cover increases from N to S and a structuring of the autochthonous basement of the Moesian Platform is observed. The crystalline crust displays thickness variations, but at the same time the lateral velocity structure along the seismic line remains almost constant. An intra-crustal boundary separates an upper crust from the lower crust. Within the upper mantle a low velocity zone is detected at a depth of about 55-km.

The interpretation of observable S-waves resulted in a velocity model that shows the same multi-layered crust, with S-velocities increasing similarly with depth as the P-waves. The corresponding Poisson's ratio is highly variable throughout the crust and ranges from 0.20–0.35 for the sedimentary cover to 0.22–0.25 for the crystalline crust. The interpretation of the V_p, V_s and Poisson's ratio in petrological terms suggests a large variety of rocks from sand and clay to sandstone, limestone and dolomite within the sedimentary cover. Within the crystalline crust the most probably rock types are granite, granodiorite, granite–gneiss and/or felsic amphibolite–gneiss in the upper part and gneiss and /or amphibolite in the lower part.

Based on the 2-D seismic velocity model, a density model is developed. Density values are assigned to each layer in agreement with the P-wave velocity model and with values accepted for the geological units in the area. After several iterations a good fit between the computed and observed Bouguer anomalies was obtained along the seismic line.     

Upper lithospheric seismic velocity structure across the Pripyat Trough and the Ukrainian Shield along the EUROBRIDGE'97 profile

We present new results on the structure resulting from Palaeoproterozoic terrane accretion and later formation of one of the aulacogens in the East European Platform. Seismic data has been acquired along the 530-km-long, N–S-striking EUROBRIDGE'97 traverse across Sarmatia, a major crustal segment of the East European Craton. The profile extends across the Ukrainian Shield from the Devonian Pripyat Trough, across the Palaeoproterozoic Volyn Block and the Korosten Pluton, into the Archaean Podolian Block. Seismic waves from chemical explosions at 18 shot points at approximately 30-km intervals were recorded in two deployments by 120 mobile three-component seismographs at 3–4 km nominal station spacing. The data has been interpreted by use of two-dimensional tomographic travel time inversion and ray trace modelling. The high data quality allows modelling of the P- and S-wave velocity structure along the profile. There are pronounced differences in seismic velocity structure of the crust and uppermost mantle between the three main tectonic provinces traversed by the profile: (i) the Pripyat Trough is a ca. 4-km-deep sedimentary basin, fully located in the Osnitsk–Mikashevichi Igneous Belt in the northern part of the profile. The velocity structure is typical for a Precambrian craton, but is underlain by a ca. 5-km-thick lowest crustal layer of high velocity. The development of the Pripyat Trough appears to have only affected the upper crust without noticeable thinning of the whole crust; this may be explained by a rheologically strong lithosphere at the time of formation of the trough. (ii) Very high seismic velocity and Vp/Vs ratio characterise the Volyn Block and Korosten Pluton to a depth of 15 km and probably also the lowest crust. The values are consistent with an intrusive body of mafic composition in the upper crust that formed from bimodal melts derived from the mantle and the lower crust. (iii) The Podolian Block is close to a typical cratonic velocity structure, although it is characterised by relatively low seismic velocity and Vp/Vs ratio. A pronounced SW-dipping mantle reflector from Moho to at least 70 km depth may represent the Proterozoic suture between Sarmatia and Volgo–Uralia, the structure from terrane accretion, or a later shear zone in the upper mantle. The sub-Moho P-wave seismic velocity is high everywhere along the profile, with the exception of the area above the dipping reflector. This velocity change further supports a plate tectonic origin of the dipping mantle reflector. The profile demonstrates that structure from Palaeoproterozoic plate tectonic processes are still identifiable in the lithosphere, even where younger metamorphic equilibration of the crust has taken place.     

Attenuation in Southeastern Carpathians area: Result of upper mantle inhomogeneity

The systematic analysis of seismograms recorded on the Romanian territory using Vrancea intermediate-depth earthquakes shows a strong asymmetric pattern relative to the epicentral area: on one side, in the Transylvanian Basin and the Eastern Carpathians (approximately along the inner volcanic chain), the amplitudes are reduced by a factor of 20 on average and the high frequencies are attenuated, in contrast with the other side, in the foreland platform. This pattern is explained by a significant attenuation increase caused by a strong lateral variation of the structure in the upper mantle, immediately towards NW of the Vrancea seismic active volume. This region corresponds to the most recent volcanic activity in the Persani Mountains and with the low-velocity body adjacent toward NW to the high-velocity body subducted beneath Vrancea area as indicated by seismic tomography and heat flow results. The CALIXTO'99 tomography experiment, deployed for 6 months in 1999, provides the largest number of observations for Vrancea earthquakes ever recorded on the Romanian territory. We select data from 8 earthquakes generated in this time interval in the Vrancea nest, which were recorded with signal / noise ratio greater than 5 by at least 25 stations. All of them are small- to moderate-magnitude events (3.6 ≤ M_w ≤ 4.2). The attenuation is much more important in the high-frequency range (> 1 Hz), than at low frequencies. Since the large Vrancea earthquakes can radiate significant energy in the low-frequency range (< 1 Hz), our results show that the seismic hazard level is much more uniform all over the Romanian territory in the low-frequency range than in the high-frequency range.     

1: Subduction, slab detachment and mineralization: The Neogene in the Apuseni Mountains and Carpathians

The Inner Carpathians comprise several distinct Neogene late-stage orogenic Pb–Zn–Cu–Ag–Au ore districts. The mineral deposits in these districts are closely related to volcanic and subvolcanic rocks, and represent mainly porphyry and epithermal vein deposits, which formed within short periods of time in each district. Here, we discuss possible geodynamic and structural controls that suggest why some of the Neogene volcanic districts within the Carpathians comprise abundant mineralization, while others are barren. The Neogene period has been characterized by an overall geodynamic regime of subduction, where primary roll-back of the subducted slab and secondary phenomena, like slab break-off and the development of slab windows, could have contributed to the evolution, location and type of volcanic activity. Structural features developing in the overlying lithosphere and visible in the Carpathian crust, such as transtensional wrench corridors, block rotation and relay structures due to extrusion tectonics, have probably acted in focusing hydrothermal activity. As a result of particular events in the geodynamic evolution and the development of specific structural features, mineralization formed during fluid channelling within transtensional wrench settings and during periods of extension related to block rotation.In the Slovakian ore district of the Western Carpathians, Neogene volcanism and associated mineralization were localized by sinistral, NE-trending wrench corridors, which formed part of the extruding Alcapa block. The Baia Mare ore district, in the Eastern Carpathians, reflects a transtensional wrench setting on distributed oversteps close to the termination of the Dragos Voda fault. There, mineralization was spatially controlled by the transtensional Dragos Voda master fault and associated cross-fault systems. The Golden Quadrangle Cu–Au ore district of the Southern Apuseni Mountains reflects an unusual rotated transtensional/extensional setting close to the termination of a graben system. There, fluid flow was probably localized by fault propagation at the inner tip of the graben system.The spatial and temporal evolution of the magmatism and its changing geochemical signature from (N)W to (S)E strongly suggests a link with the contemporaneous northeastward roll-back of the subducted slab and a progressive southeastward detachment during accelerating roll-back. This geodynamic evolution is further supported by the present-day overall and detailed mantle lithospheric density images, the present-day heat flow patterns, the crustal architecture and its interpreted evolution, and the spatial and temporal evolution of depocentres around the Carpathian arc. In contrast to all these features, the mineral deposits in the West Carpathians, East Carpathians and Apuseni Mountains are too synchronous with respect to their individual volcanic history and contrast too much with younger volcanics of similar style, but barren, in southeastern parts of the Carpathians to simply link them directly to the slab evolution. In all three districts, the presence of magmatic fluids released from shallow plutons and their mixing with meteoric water were critical for mineralization, requiring transtensional or extensional local regimes at the time of mineralization, possibly following initial compressional regimes.These three systems show that mineralization was probably controlled by the superposition of favourable mantle lithospheric conditions and partly independent, evolving upper crustal deformation conditions.In the 13 to 11 Ma period the dominant mineralization formed all across the Carpathians, and was superimposed on structurally favourable crustal areas with, at that time, volcanic–hydrothermal activity. The period may reflect the moment when the (upper part of the) crust failed under lithospheric extension imposed by the slab evolution. This crustal failure would have fragmented the overriding plate, possibly breaking up the thermal lid, to provoke intensive fluid flow in specific areas, and allowed subsequent accelerated tectonic development, block rotation and extrusion of a “family of sub-blocks” that are arbitrarily regarded as the Tisia–Dacia or Alcapa blocks, even though they have lost their internal entity.     

Coastal neotectonics in Southern Central Andes: uplift and deformation of marine terraces in Northern Chile (27°S)

Neotectonic observations allow a new interpretation of the recent tectonic behaviour of the outer fore arc in the Caldera area, northern Chile (27°S). Two periods of deformation are distinguished, based on large-scale Neogene to Quaternary features of the westernmost part of the Coastal Cordillera: Late Miocene to Early Pliocene deformations, characterized by a weak NE–SW to E–W extension is followed by uppermost Pliocene NW–SE to E–W compression. The Middle Pleistocene to Recent time is characterized by vertical uplift and NW–SE extension. These deformations provide clear indications of the occurrence of moderate to large earthquakes. Microseismic observations, however, indicate a lack of shallow crustal seismicity in coastal zone. We propose that both long-term brittle deformation and uplift are linked to the subduction seismic cycle.     

Seismic imaging and crustal architecture across the Lachlan Transverse Zone,a possible early cross‐cutting feature of eastern Australia

A 2‐D crustal velocity model has been derived from a 1997 364 km north‐south wide‐angle seismic profile that passed from Ordovician volcanic and volcaniclastic rocks (Molong Volcanic Belt of the Macquarie Arc) in the north, across the Lachlan Transverse Zone into Ordovician turbidites and Early Devonian intrusive granitoids in the south. The Lachlan Transverse Zone is a proposed west‐northwest to east‐southeast structural feature in the Eastern Lachlan Orogen and is considered to be a possible early lithospheric feature controlling structural evolution in eastern Australia; its true nature, however, is still contentious. The velocity model highlights significant north to south lateral variations in subsurface crustal architecture in the upper and middle crust. In particular, a higher P‐wave velocity (6.24–6.32 km/s) layer identified as metamorphosed arc rocks (sensu lato) in the upper crust under the arc at 5–15 km depth is juxtaposed against Ordovician craton‐derived turbidites by an inferred south‐dipping fault that marks the southern boundary of the Lachlan Transverse Zone. Near‐surface P‐wave velocities in the Lachlan Transverse Zone are markedly less than those along other parts of the profile and some of these may be attributed to mid‐Miocene volcanic centres. In the middle and lower crust there are poorly defined velocity features that we infer to be related to the Lachlan Transverse Zone. The Moho depth increases from 37 km in the north to 47 km in the south, above an underlying upper mantle with a P‐wave velocity of 8.19 km/s. Comparison with velocity layers in the Proterozoic Broken Hill Block supports the inferred presence of Cambrian oceanic mafic volcanics (or an accreted mafic volcanic terrane) as substrate to this part of the Eastern Lachlan Orogen. Overall, the seismic data indicate significant differences in crustal architecture between the northern and southern parts of the profile. The crustal‐scale P‐wave velocity differences are attributed to the different early crustal evolution processes north and south of the Lachlan Transverse Zone.     

Upper and middle crustal deformation of an arc–arc collision across Hokkaido, Japan, inferred from seismic refraction/wide-angle reflection experiments

The Hidaka Collision Zone (HCZ), central Hokkaido, Japan, is a good target for studies of crustal evolution and deformation processes associated with an arc–arc collision. The collision of the Kuril Arc (KA) with the Northeast Japan Arc (NJA), which started in the middle Miocene, is considered to be a controlling factor for the formation of the Hidaka Mountains, the westward obduction of middle/lower crustal rocks of the KA (the Hidaka Metamorphic Belt (HMB)) and the development of the foreland fold-and-thrust belt on the NJA side. The “Hokkaido Transect” project undertaken from 1998 to 2000 was a multidisciplinary effort intended to reveal structural heterogeneity across this collision zone by integrated geophysical/geological research including seismic refraction/reflection surveys and earthquake observations. An E–W trending 227 km-long refraction/wide-angle reflection profile found a complicated structural variation from the KA to the NJA across the HCZ. In the east of the HCZ, the hinterland region is covered with 4–4.5 km thick highly undulated Neogene sedimentary layers, beneath which two eastward dipping reflectors were imaged in a depth range of 10–25 km, probably representing the layer boundaries of the obducting middle/lower crust of the KA. The HMB crops out on the westward extension of these reflectors with relatively high Vp (>6.0 km/s) and Vp/Vs (>1.80) consistent with middle/lower crustal rocks. Beneath these reflectors, more flat and westward dipping reflector sequences are situated at the 25–27 km depth, forming a wedge-like geometry. This distribution pattern indicates that the KA crust has been delaminated into more than two segments under our profile. In the western part of the transect, the structure of the fold-and-thrust belt is characterized by a very thick (5–8 km) sedimentary package with a velocity of 2.5–4.8 km/s. This package exhibits one or two velocity reversals in Paleogene sedimentary layers, probably formed by imbrication associated with the collision process. From the horizontal distribution of these velocity reversals and other geophysical/geological data, the rate of crustal shortening in this area is estimated to be greater than 3–4 mm/year, which corresponds to 40–50% of the total convergence rate between the NJA and the Eurasian Plate. This means that the fold-and-thrust belt west of the HCZ is absorbing a large amount of crustal deformation associated with plate interaction across Hokkaido Island.     

Crustal heterogeneity and seismotectonics of the region around Beijing, China

A detailed three-dimensional (3-D) P-wave velocity model of the crust and uppermost mantle under the Chinese capital (Beijing) region is determined with a spatial resolution of 25 km in the horizontal direction and 4–17 km in depth. We used 48,750 precise P-wave arrival times from 2973 events of local crustal earthquakes, controlled seismic explosions and quarry blasts. These events were recorded by a new digital seismic network consisting of 101 seismic stations equipped with high-sensitivity seismometers. The data are analyzed by using a 3-D seismic tomography method. Our tomographic model provides new insights into the geological structure and tectonics of the region, such as the lithological variations and large fault zones across the major geological terranes like the North China Basin, the Taihangshan and the Yanshan mountainous areas. The velocity images of the upper crust reflect well the surface geological and topographic features. In the North China Basin, the depression and uplift areas are imaged as slow and fast velocities, respectively. The Taihangshan and Yanshan mountainous regions are generally imaged as broad high-velocity zones, while the Quaternary intermountain basins show up as small low-velocity anomalies. Velocity changes are visible across some of the large fault zones. Large crustal earthquakes, such as the 1976 Tangshan earthquake (M=7.8) and the 1679 Sanhe earthquake (M=8.0), generally occurred in high-velocity areas in the upper to middle crust. In the lower crust to the uppermost mantle under the source zones of the large earthquakes, however, low-velocity and high-conductivity anomalies exist, which are considered to be associated with fluids. The fluids in the lower crust may cause the weakening of the seismogenic layer in the upper and middle crust and thus contribute to the initiation of the large crustal earthquakes.