Interpretation of light curves of IP Peg in a model with shockless interaction between the gas stream and disk

We have analyzed light curves of the eclipsing cataclysmic variable IP Peg. A model with a shockless interaction between the gaseous stream and disk (i.e., an elliptical disk with a “hot line”) can describe the main characteristic features of the light curve of the interacting close binary better than a classical model with a “hot spot” at the outer boundary of a circular accretion disk. In particular, the hot-line model can reproduce the luminosity increase observed at phases ?～0.1–0.2 and ?～0.5–0.6, which is not possible in the standard hot-spot model. The advantages of the hot-line model are particularly striking for the IR light curves of IP Peg: the discrepancy χ² between the theoretical and observed light curves is 49 for the model with a shockless interaction between the gaseous stream and disk, and 2681 for the standard hot-spot model.     

Late stages of the evolution of close compact binaries: Type I supernovae,gamma-ray bursts,and supersoft X-ray sources

We consider the evolution of close binaries resulting in the most intensive explosive phenomena in the stellar Universe—Type Ia supernovae and gamma-ray bursts. For Type Ia supernovae, which represent thermonuclear explosions of carbon-oxygen dwarfs whose masses reach the Chandrasekhar limit during the accretion of matter from the donor star, we derive the conditions for the accumulation of the limiting mass by the degenerate dwarf in the close binary. Accretion onto the degenerate dwarf can be accompanied by supersoft X-ray radiation with luminosity 1–10⁴ L _⊙. Gamma-ray bursts are believe to accompany the formation and rapid evolution of compact accretion-decretion disks during the formation of relativistic objects—black holes and neutron stars. The rapid (～1 M _⊙/s) accretion of matter from these disks onto the central compact relativistic star results in an energy release of ～0.1 M _⊙ c ² ～ 10⁵³ erg in the form of gamma-rays and neutrinos over a time of 0.1–1000 s. Such disks can form via the collapse of the rapidly rotating cores of Type Ib, Ic supernovae, which are components in extremely close binaries, or alternately due to the collapse of accreting oxygen-neon degenerate dwarfs with the Chandrasekhar mass into neutron stars, or the merging of neutron stars with neutron stars or black holes in close binaries. We present numerical models of the evolution of some close binaries that result in Type Ia supernovae, and also estimate the rates of these supernovae (～0.003/year) and of gamma-ray bursts (～10^?4/year) in our Galaxy for various evolutionary scenarios. The collimation of the gamma-ray burst radiation within an opening angle of several degrees “matches” the latter estimate with the observed rate of these events, ～10^?7–10^?8/year calculated for a galaxy with the mass of our Galaxy.     

The thickness of accretion α-disks: Theory and observations

Observations of X-ray binaries indicate substantial half-thicknesses for the accretion disks in these systems (up to h/R ≈ 0.25, where h is the disk half-thickness and R its radius), while standard α accretion disks predict appreciably smaller half-thicknesses. We study the theoretical vertical structure of such disks using two independent numerical methods, and show that their maximum half-thicknesses in the subcritical regime cannot exceed h/R ≈ 0.1. We consider various reasons for the apparent increase in the disk thickness, the most probable of which is the presence of matter above the disk in the form of a hot corona that scatters hard radiation from the central source and inner parts of the disk. As a result, the observed thickness of the disk and the illumination of its outer parts effectively increase. This mechanism can also explain both the optical-to-X-ray flux ratio in these systems and the observed parameters of eclipsing X-ray binaries.     

Hydrodynamical modeling of mass transfer in the close binary system <Emphasis Type="Italic">β</Emphasis> Lyr

We present results of two-dimensional hydrodynamical simulations of mass transfer in the close binary system β Lyr for various radii of the accreting star and coefficients describing the interaction of the gaseous flow and the main component (primary). We take the stellar wind of the donor star into account and consider various assumptions about the radiative cooling of the gaseous flow. Our calculations show that the initial radius of the flow corresponding to our adopted mass-transfer rate through the inner Lagrange point (L₁) of (1–4) × 10^?5M_⊙/yr is large: 0.22–0.29 (in units of the orbital separation). In all the models, the secondary loses mass through both the inner and outer (L₁ and L₂) Lagrange points, which makes the mass transfer in the system nonconservative. Calculations for various values of the primary radius show a strong dependence on the coefficient fv that models the flow-primary interaction. When the radius of the primary is 0.5, there is a strong interaction between the gas flow from L1 and the flow reflected from the primary surface. For other values of the primary radius (0.1 and 0.2), the flow does not interact directly with the primary. The flow passes close to the primary and forms an accretion disk whose size is comparable to that of the Roche lobe and a dense circum-binary envelope surrounding both the disk and the binary components. The density in the disk varies from 10¹² to 10¹⁴ cm^?3, and is 10¹⁰–10¹² cm^?3 in the circum-binary envelope. The temperature in the accretion disk ranges from 30000 to 120000 K, while that in the circum-binary envelope is 4000–18000 K. When radiative cooling is taken into account explicitly, the calculations reveal the presence of a spiral shock in the accretion disk. The stellar wind blowing from the secondary strongly interacts with the accretion disk, circum-binary envelope, and flow from L₂. When radiative cooling is taken into account explicitly, this wind disrupts the accretion disk.     

Two-dimensional hydrodynamical modeling of mass transfer in semidetached binaries with asynchronously rotating components

We have modeled the mass transfer in the three semidetached binaries U Cep, RZ Sct, and V373 Cas taking into account radiative cooling both implicitly and explicitly. The systems have asynchronously rotating components and high mass-transfer rates of the order of 10^?6M_⊙/yr; they are undergoing various stages of their evolution. An accreting star rotates asynchronously if added angular momentum is redistributed over the entire star over a time that exceeds the synchronization time. Calculations have indicated that, in the model considered, mass transfer through the point L₁ is unable to desynchronize the donor star. The formation of an accretion disk and outer envelope depends on the component-mass ratio of the binary. If this ratio is of the order of unity, the flow makes a direct impact with the atmosphere of the accreting star, resulting in the formation of a small accretion disk and a relatively dense outer envelope. This is true of the disks in U Cep and V373 Cas. When the component-mass ratio substantially exceeds unity (the case in RZ Sct), the flow forms a large, dense accretion disk and less dense outer envelope. Taking into account radiative cooling both implicitly and explicitly, we show that a series of shocks forms in the envelopes of these systems.     

Three-dimensional hydrodynamical modeling of mass transfer in the close binary system β Lyr

We present a three-dimensional hydrodynamical modeling of mass transfer in the close binary system β Lyr taking radiative cooling into account explicitly. The assumed mass-transfer rate through the first Lagrangian point L₁ is 3.0 × 10^?5 M _⊙/yr. A flow with a radius of 0.14–0.16 (in units of orbital separation) is formed in the vicinity of L₁. This flow forms an accretion disk with a radius close to 23 R _⊙ and a thickness of about 10 R _⊙. The accretion disk is surrounded by an outer envelope that extends beyond the computational domain. A spiral shock forms at the outer boundary of the disk at orbital phase 0.25. Geometrically, the disk is toruslike, while the outer envelope is cylinder-like. In this model, which has low temperatures inside the computational domain, no jetlike structures form in the disk. It is possible that the jetlike structure in β Lyr arises due to the interaction of radiative wind from the accretor with the flow from L₁. In the model considered, a hot region exists over the poles of the accretor at a height of about 0.21. The amount of matter lost by the system is close to 10% of the mass flowing through L₁; i.e., the mass transfer in the system is almost conservative. For a mass-transfer rate of 3.0 × 10^?5 M _⊙/yr, the orbital period varies by 40.4 s/yr. This means that the observed variation of the orbital period of 19 s/yr should correspond to a mass-transfer rate close to 1.0 × 10^?5 M _⊙/yr.     

Diagnostics for accretion disks around UX Ori stars based on Balmer, Paschen, and Brackett Lines

We have modeled the H_α, H_β, and H_γ (Balmer series), P₁₄ (Paschen series), and Br_γ (Brackett series) hydrogen lines formed in the inner regions of the accretion disk around the Herbig Ae star UX Ori. Our calculations are based on spectra obtained with the Nordic Optical Telescope (NOT) and the IRTF. We computed a grid of non-LTE models for a radiating area in the accretion disk and determined the basic parameters of the lines using the method of Sobolev. Analyzing the theoretical and observed line profiles, equivalent widths, and luminosities, we have estimated the accretion rate and electron-temperature distribution in the inner parts of the accretion disk. The accretion rate of UX Ori is about $\dot M_a = (3 - 10) \times 10^{ - 9} M_ \odot /yr$ , and the temperature distribution is consistent with the power law T(r)=T(r _*)(r/r _*)^?1/n , where the electron temperature near the stellar surface T(r _*) is 15000–20000 K and the power-law index n≈2–3 is about two to three. The resulting value for $\dot M_a $ eliminates problems connected with the application of magnetospheric accretion models to Herbig Ae/Be stars. Another important conclusion is that, at the estimated accretion rate, the energy release is substantially (about two orders of magnitude) lower than the stellar luminosity. Therefore, the optical radiation of UX Ori accretion disks cannot appreciably contribute to the observed variability of these stars, which must be determined mainly by variability in the circumstellar extinction.     

Evolution of close binaries and gamma-ray bursts

We analyze the late stages of evolution of massive (M ₀ ? 8 M _⊙) close binaries, from the point of view of possible mechanisms for the generation of gamma-ray bursts. It is assumed that a gamma-ray burst requires the formation of a massive (～1 M _⊙), compact (R ? 10 km) accretion disk around a Kerr black hole or neutron star. Such Kerr black holes are produced by core collapses of Wolf-Rayet stars in very close binaries, as well as by mergers of neutron stars and black holes or two neutron stars in binaries. The required accretion disks can also form around neutron stars that were formed via the collapse of ONeMg white dwarfs. We estimate the Galactic rate of events resulting in the formation of rapidly rotating relativistic objects. The computations were carried out using the “Scenario Machine.”     

Wolf-Rayet stars,black holes,and gamma-ray bursters in close binaries

We consider the evolutionary status of observed close binary systems containing black holes and Wolf-Rayet (WR) stars. When the component masses and the orbital period of a system are known, the reason for the formation of a WR star in an initial massive system of two main-sequence stars can be established. Such WR stars can form due to the action of the stellar wind from a massive OB star (M_OB≥50M_⊙), conservative mass transfer between components with close initial masses, or the loss of the common envelope in a system with a large (up to ～25) initial component mass ratio. The strong impact of observational selection effects on the creation of samples of close binaries with black holes and WR stars is demonstrated. We estimate theoretical mass-loss rates for WR stars, which are essential for our understanding the observed ratio of the numbers of carbon and nitrogen WR stars in the Galaxy \(\dot M_{WR} (M_ \odot yr^{ - 1} ) = 5 \times 10^{ - 7} (M_{WR} /M_ \odot )^{1.3} \). We also estimate the minimum initial masses of the components in close binaries producing black holes and WR stars to be ～25M_⊙. The spatial velocities of systems with black holes indicate that, during the formation of a black hole from a WR star, the mass loss reaches at least several solar masses. The rate of formation of rapidly rotating Kerr black holes in close binaries in the Galaxy is ～3×10^?6 yr^?1. Their formation may be accompanied by a burst of gamma radiation, possibly providing clues to the nature of gamma-ray bursts. The initial distribution of the component mass ratios for close binaries is dN～dq=dM₂/M₁ in the interval 0.04?q₀≤1, suggesting a single mechanism for their formation.     

Period clustering of anomalous X-ray pulsars

The question of why the observed periods of anomalous X-ray pulsars (AXPs) and soft gamma-ray repeaters (SGRs) cluster in the range 2–12 s is discussed. The possibility that AXPs and SGRs are the descendants of high-mass X-ray binaries that have disintegrated in core-collapse supernova explosions is investigated. The spin periods of neutron stars in high-mass X-ray binaries evolve towards the equilibrium period, which is a few seconds, on average. After the explosion of its massive companion, the neutron star becomes embedded in a dense gaseous envelope, and accretion from this envelope leads to the formation of a residual magnetically levitating disk. It is shown that the expected mass of the disk in this case is 10^?7–10^?8 M_⊙, which is sufficient to support accretion at the rate 10¹⁴–10¹⁵ g/s over a few thousand years. During this period, the star manifests itself as an isolated X-ray pulsar with a number of parameters similar to those of AXPs and SGRs. The periods of such pulsars can cluster if the lifetime of the residual disk does not exceed the spin-down timescale of the neutron star.     

Observational Manifestations of the Precessional Wave in the Accretion Disk of a Cataclysmic Variable Star

Effects due to the interaction of the steam from the inner Lagrangian point with the accretion disk in a cataclysmic variable star are considered. The results of three-dimensional gas-dynamical numerical simulations confirm that the disk thickness in the vicinity of the interaction with the stream is minimum when the component-mass ratio is 0.6. As a consequence, some of the matter from the stream does not collide with the outer edge of the accretion disk, and continues its motion unperturbed toward the accretor. This part of the stream subsequent interacts (collides) with a thickening of the accretion disk due to the presence of a precessional wave in the disk, leading to the appearance of an additional zone of heating at the disk surface. This additional zone of enhanced luminosity (hot spot) is a direct observational manifestation of the precessional wave in the accretion disk.     

Ring structures in Orion KL

We present the results of studies of the superfine structure of H₂O maser sources in the Orion Nebula. Powerful, low-velocity, compact maser sources are distributed in eight active zones. Highly organized structures in the form of chains of compact components were revealed in two of these, in the molecular cloud OMC-1. The component sizes are ～0.1 AU and their brightness temperatures are T _b =10¹²?10¹⁶ K. The structures correspond to tangential sections of concentric rings viewed edge-on. The ring emission is concentrated in the azimuthal plane, decreasing the probability of their discovery. The formation of protostars is accompanied by the development of accretion disks and bipolar flows, with associated H₂O maser emission. The accretion disks are in the stage of fragmentation into protoplanetary rings. In a Keplerian approximation, the protostars have low masses, possibly evidence for instability of the systems. Supermaser emission of the rings is probably triggered by precession of the accretion disk. The molecular cloud’s radial velocity is V _LSR=7.74 km/s and its optical depth is τ≈5. The emission from components with velocities within the maser window is additionally amplified. The components’ emission is linearly polarized via anisotropic pumping.     

Three-dimensional hydrodynamical modeling of accretion-disk formation in microquasars. Cen X-3

We have carried out three-dimensional hydrodynamical modeling of the formation of an accretion disk around a compact object due to radiative wind of a massive donor in a close binary system. The massive X-ray binary Cen X-3, which has a precessing accretion disk and may possess relativistic jets, is considered as an example. The computations show that, when the action of the central compact object on the formation of the wind is taken into account, the radiative wind forms an accretion disk with a radius of 0.16 (in units of the orbital separation), which accretes at a rate close to 1 × 10^?8 M _⊙/yr. In this model, the disk is spherically symmetrical and geometrically thick, with a tunnel going from the accretor to the upper layers of the disk along the accretor’s rotational axis at the disk center. The number density of the gas in the tunnel is five orders of magnitude lower than in the disk. The wind-disk interaction at the outer boundary of the disk produces a strong shock (wind-disk shock) directed toward the donor. The black-body emission of the disk and tunnel is nonstationary, and resembles the outbursts observed in Cen X-3. An analysis of the location of the region of nonstationary emission suggests that the outbursts occur in the wind-disk shock.     

Three-dimensional gas-dynamical modeling of changes in the flow structure during the transition from the quiescent to the active state in symbiotic stars

The results of three-dimensional modeling of the flow structure in the classical symbiotic system Z Andromedae are presented. Outbursts in systems of this type occur when the accretion rate exceeds the upper limit of the steady-burning range. Therefore, in order to realize the transition from a quiescent to an active state, it is necessary to find a mechanism capable of sufficiently increasing the accretion rate on the time scales typical for outburst development. Our calculations provide support for a mechanism for the transition from quiescence to outburst in classical symbiotic systems suggested earlier based on two-dimensional calculations (Bisikalo et al., 2002). Our results show that an accretion disk forms in the system for a wind velocity of 20 km s^?1. The accretion rate for the solution with the disk is ～22.5–25% of the mass-loss rate of the donor, which is ～4.5?5 × 10^?8M_⊙ yr^?1 for Z And. This value is in agreement with the steady-burning range for the white-dwarf masses usually accepted for this system. When the wind velocity increases from 20 to 30 km s^?1, the accretion disk is destroyed and the disk material falls onto the accretor surface. This process is followed by an approximately twofold jump in the accretion rate. The resulting growth in the accretion rate is sufficient so as to exceed the upper limit of the steady-burning range, thus bringing the system into an active state. The time during which the accretion rate is above the steady-burning value is in very good agreement with observations. Our analysis leads us to conclude that small variations in the donor wind velocity can lead to the transition from disk accretion to wind accretion and, as a consequence, to the transition from a quiescent to an active state in classical symbiotic stars.     

Formation of a radiative wind and accretion disk in microquasars. Generation of flare activity in the disk due to an increase in the supply of material to the Lagrange point L<Subscript>1</Subscript>. The system LMC X-3

Three-dimensional numerical hydrodynamical modeling of a radiative wind and accretion disk in a close binary system with a compact object is carried out, using the massive X-ray binary LMC X-3 as an example. This system contains a precessing disk, and may have relativistic jets. These computations show that an accretion disk with a radius of about 0.20 (in units of the component separation) forms from the radiative wind from the donor when the action of the wind on the central source is taken into account, when the accretion rate is equal to the observed value (about 3.0 × 10^?8 M _⊙/year, which corresponds to the case when the donor overflows its Roche lobe by nearly 1%). It is assumed that the speed of the donor wind at infinity is about 2200 km/s. The disk that forms is geometrically thick and nearly cylindrical in shape, with a low-density tunnel at its center extending from the accretor through the disk along the rotational axis. We have also modeled a flare in the disk due to short-term variations in the supply of material through the Lagrange point L₁, whose brightnesses and durations are able to explain flares in cataclysmic variables and X-ray binaries. The accretion disk is not formed when the donor underfills its Roche lobe by 0.5%, which corresponds to an accretion rate onto the compact object of 2.0 × 10^?9 M _⊙/year. In place of a disk, an accretion envelope with a radius of about 0.03 forms, within which gas moves along very steep spiral trajectories before falling onto the compact object. As in the accretion-disk case, a tunnel forms along the rotational axis of the accretion envelope; a shock forms behind the accretor, where flares occur in a compact region a small distance from the accretor at a rate of about six flares per orbital period, with amplitudes of about 10 ^m or more. The flare durations are two to four minutes, and the energies of individual particles at the flare maximum are about 100–150 keV. These flares appear to be analogous to the flares observed in gamma-ray and X-ray burst sources. We accordingly propose a model in which these phenomena are associated with massive, close X-ray binary systems with component-mass ratios exceeding unity, in which the donor does not fill its Roche lobe. Although no accretion disk forms around the compact object, an accretion region develops near the accretor, where the gamma-ray and X-ray flares occur.     

Interaction of the stream from <Emphasis Type="Italic">L</Emphasis><Subscript>1</Subscript> with the outer edge of the accretion disk in a cataclysmic variable

Vertical oscillations of the gas at the outer edge of the accretion disk in a semi-detached binary due to interaction with the stream of matter from the inner Lagrangian point L ₁ are considered. Mixing of the matter from the stream from L ₁ with matter of the disk halo results in the formation of a system of two diverging shocks and a contact discontinuity, or so-called “hot line”. The passage of matter through the region of the hot line leads to an increase in its vertical velocity and a thickening of the disk at phases 0.7?0.8. Subsequently, the matter moving along the outer edge of the disk also experiences vertical oscillations, forming secondary maxima at phases 0.2?0.4. It is shown that, for systems with component mass ratios of 0.6, these oscillations will be amplified with each passage of the matter through the hotline zone, while the observations will be quenched in systems with component mass ratios ~0.07 and ~7. The most favorable conditions for the flow of matter from the stream through the edge of the disk arise for component mass ratios ~0.62. A theoretical relation between the phases of disk thickenings and the component mass ratio of the system is derived.     

Thermodynamic properties of glaucophane new data from calorimetric and spectroscopic measurements

New data concerning glaucophane are presented. New high temperature drop calorimetry data from 400 to 800 K are used to constrain the heat capacity at high temperature. Unpublished low temperature calorimetric data are used to estimate entropy up to 900 K. These data, corrected for composition, are fitted for C _p and S to the polynomial expressions (J · mol^?1 · K^?2) for T> 298.15 K: $$\begin{gathered} C_p = 11.4209 * 10^2 - 40.3212 * 10^2 /T^{{1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-\nulldelimiterspace} 2}} - 41.00068 * 10^6 /T^2 \hfill \\ + 52.1113 * 10^8 /T^3 \hfill \\ \end{gathered} $$ $$\begin{gathered} S = 539 + 11.4209 * 10^2 * \left( {\ln T - \ln 298.15} \right) - 80.6424 * 10^2 \hfill \\ * \left( {T^{ - {1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-\nulldelimiterspace} 2}} - 1/\left( {298.15} \right)^{{1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-\nulldelimiterspace} 2}} } \right) + 20.50034 * 10^6 \hfill \\ * \left( {T^{ - 2} - 1/\left( {298.15} \right)^2 } \right) - 17.3704 * 10^8 * \left( {T^{ - 3} - \left( {1/298.15} \right)^3 } \right) \hfill \\ \end{gathered} $$ IR and Raman spectra from 50 to 3600 cm^?1 obtained on glaucophane crystals close to the end member composition are also presented. These spectroscopic data are used with other data (thermal expansion, acoustic velocities etc.) in vibrational modelling. This last method provides an independent way for the determination of the thermodynamic properties (C_p and entropy). The agreement between measured and calculated properties is excellent (less than 2% difference between 100 and 1000 K). It is therefore expected that vibrational modelling could be applied to other amphiboles for which spectroscopic data are available. Finally, the enthalpy of formation of glaucophane is calculated.     

Synthetic light curves of close binaries in a cool-disk model. The “hot line” and “hot spot” as visual indicators of interaction between the flow and disk

We present a “combined” model taking into account visual manifestations of the interaction between the gas flow and the accretion disk in a close binary system in the form of a “hot line” and a “hot spot.” The binary consists of a red dwarf that fills its Roche lobe and a compact spherical star (a white dwarf or neutron star) surrounded with a thick ellipsoidal accretion disk of a complex shape. The disk thickness is not large near the compact star but increases according to a parabolic law towards its outer edge. The oblique collision of the gaseous flow with matter of the cool, rotating disk, whose outer edge has a temperature <10 000 K, creates an extended region of enhanced energy release. In the combined model, this region is represented with a hot line that coincides with the optically opaque part of the flow and is located outside the disk, together with a hot spot at the outer surface of the disk, on the leeward side of the flow. The synthetic light curves for the combinedmodel and a hot-line model demonstrate that both models are able to fairly accurately reproduce the shapes of both classical and atypical light curves of cataclysmic variables in quiescence. Our determination of the parameters of the cataclysmic variable OY Car from an analysis of its light curves using the two models shows that the basic characteristics of the close binary, such as the component mass ratio q = M ₁/M ₂, orbital inclination i, effective temperatures of the red dwarf (T ₂) and white dwarf (T ₁), and orientation of the disk α _e , remain the same within the errors. The parameters describing the size of the slightly elliptical disk and the radiation flux from the disk differ by several percent (∼ 2–8%). A more significant difference is detected in the parameters of the hot line, due to the different shape and alignment of the flow and the presence of an additional radiation source—the hot spot—on the disk.     

Light-curve syntheses for close binary systems: Modeling spiral waves in an elliptical disk around a white dwarf

We present an algorithm for synthesizing the light curve of a close binary consisting of a normal star (a red dwarf that fills its Roche lobe) and a spherical star (a white dwarf). The spherical component is surrounded by an elliptical accretion disk with a complex shape: it is geometrically thin near the spherical star and geometrically thick at the edge of the disk. An additional complication is presented by the presence of a one-or two-armed spiral pattern at the inner surface of the disk. The maximum height of the spiral arm above the disk surface is located at ～9 R _d , and the height decreases exponentially as the arm approaches the inner regions of the disk. Shielding of the inner hot parts of the disk by the crests of the spirals results in the formation of “steps” in out-of-eclipse parts of the orbital light curves. The algorithm takes into account the presence of a “hot line” by the lateral surface of the disk, making it possible to model binary systems in both quiescence and outburst. In the latter case, the hot line degenerates into a small bulge at the outer lateral surface of the disk, which can be considered an analog of a hot spot. The algorithm was applied to the orbital light curve of the cataclysmic binary IP Peg during its October 30, 2000, outburst. To explain the variations of the out-of-eclipse brightness of the system during the outburst, it is necessary to include the presence of a one-armed spiral wave at the inner surface of the disk, close to the periastron of the elliptical disk. We have obtained the parameters of IP Peg during the outburst for various models of the system.